Style Table via CSS

Hi there. It looks like I’m going to need your help
again with a vexing table issue.
Check this out:
http://www.fastventures.co.uk/en/sec_test.html
Take a close look at the table that includes the main
navigation bar and you will notice that to the right, the last cell
is off by 1 px although the entire table was consistently styled
via CSS to match the following criteria:
.hspacer_36 /* height spacer **/
background-color: #999999;
height: 36px;
The odd thing is, that the table right next to (to the left)
was styled exactly like that and displays perfectly. Any ideas?
As you can imagine, resolving this issue is critical as we
otherwise may not be able to adopt this design.
Thanks a million for your time and help.

What browser are you using becuase I dont see the width diff
(FF2.0 on win)?
In general though I have had this issue appear when I have a
table that has
an odd number width and then two cells that are width=50% ...
"HTML-Newbie" <[email protected]> wrote in
message
news:fcgv2m$h9$[email protected]..
> Hi there. It looks like I?m going to need your help
again with a vexing
> table
> issue.
>
> Check this out:
>
>
http://www.fastventures.co.uk/en/sec_test.html
>
> Take a close look at the table that includes the main
navigation bar and
> you
> will notice that to the right, the last cell is off by 1
px although the
> entire
> table was consistently styled via CSS to match the
following criteria:
>
> .hspacer_36 /* height spacer **/
>
> {
>
> background-color: #999999;
>
> height: 36px;
>
> }
>
> The odd thing is, that the table right next to (to the
left) was styled
> exactly like that and displays perfectly. Any ideas?
>
> As you can imagine, resolving this issue is critical as
we otherwise may
> not
> be able to adopt this design.
>
> Thanks a million for your time and help.
>
>

Similar Messages

  • Is it possible to style texts via CSS file?

    I have the feeling that AS3.0 will not work with complex CSS styling, correct? I'm creating some div tag and I want to style the div tag. Will AS3 work with div tag?

    no.  these are the supported tags:
    CSS property ActionScript property Usage and supported values
    text-align
    textAlign
    Recognized values are left, center, right, and justify.
    text-decoration
    textDecoration
    Recognized values are none and underline.
    margin-right
    marginRight
    Only the numeric part of the value is used. Units (px, pt) are not parsed; pixels and points are equivalent.
    kerning
    kerning
    Recognized values are true and false.
    letter-spacing
    letterSpacing
    Only the numeric part of the value is used. Units (px, pt) are not parsed; pixels and points are equivalent.
    font-family
    fontFamily
    A comma-separated list of fonts to use, in descending order of desirability. Any font family name can be used. If you specify a generic font name, it is converted to an appropriate device font. The following font conversions are available: mono is converted to _typewriter, sans-serif is converted to _sans, and serif is converted to _serif.
    display
    display
    Supported values are inline, block, and none.

  • Can table cell vertical alignment be defined via CSS?

    In a table cell (ie, "td") is there a way to define "valign" via CSS, instead of the table cell proper?
    In other words, instead of...
    <table>
    <tr>
    <td valign="top">
    ...is it possible to do :
    <table>
    <tr>
    <td class="top">
    ...and somehow let the stylesheet define the vertical alignment?
    I'm asking because none of the attribute presets in Dreamweaver CS4 seem to provide for vertical alignment. Everything else on God's green earth seems to be there, but table cell vertical alignment seems to be the ONLY thing CSS forgot about.

    How about giving the class "top": text-align:center. Or even the tag "td" in your stylesheet. Does that help?
    John

  • Link styles via CSS...

    Hi,
    I would like to control my link styles within my CSS panel,
    but if I set up one set (up, over, blah, blah)...how about if I
    want yet another style set for link text that's within a different
    color cell? Is it possible? How?
    Also, I have controlled background imagery and copy via CSS.
    But I would like to add ALT tags to portions of the background
    image. My properties inspector won't bring it up as an option due
    to the CSS. Do I just have to work with the HTML instead of the
    visuals?
    -- Same situation for the 'hot spot' tool, and I really need
    to use it but my bg image is unselectable due to it being inserted
    via CSS. The Properties doesn't "see it". How do I get around that?
    thank you!!
    thanks!

    Pseudo-classes and container styles are what you need - here
    are some
    tutorials.
    http://www.thepattysite.com/linkstyles1.cfm
    http://www.projectseven.com/tutorials/pseudoclasses/index.htm
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "r_tist" <[email protected]> wrote in
    message
    news:fafjlv$q28$[email protected]..
    > Hi,
    >
    > I would like to control my link styles within my CSS
    panel, but if I set
    > up
    > one set (up, over, blah, blah)...how about if I want yet
    another style set
    > for
    > link text that's within a different color cell? Is it
    possible? How?
    > Also, I have controlled background imagery and copy via
    CSS. But I would
    > like
    > to add ALT tags to portions of the background image. My
    properties
    > inspector
    > won't bring it up as an option due to the CSS. Do I just
    have to work with
    > the
    > HTML instead of the visuals?
    > -- Same situation for the 'hot spot' tool, and I really
    need to use it but
    > my
    > bg image is unselectable due to it being inserted via
    CSS. The Properties
    > doesn't "see it". How do I get around that?
    >
    > thank you!!
    >
    > thanks!
    >

  • How do I add custom style to custom AS3 component via .css file?

    Hi all,
    I have created a flex application which displays a custom component I created in actionscript. My custom component is just an extended canvas component which displays a gradient background. When I add the component to my flex app, see code below, the component works great.
    <mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" xmlns:ns1="http://localhost/mycomps">
        <ns1:GradientCanvas fillColors="[#ffffff, #000000]" />
    </mx:Application>
    However, I also want to support css styles to add the gradient colors to my component, like so
    <mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" xmlns:ns1="http://localhost/mycomps">
        <mx:Style source="test.css" />
        <ns1:GradientCanvas styleName="gradientCanvas" />
    </mx:Application>
    test.css
    .gradientCanvas {
        fill-colors: #ffffff, #000000;
    When I try this my component doesn't display a gradient. I have followed the tutorials online that I could find but it seems to be the same example from Adobe repeated on multiple site and it doesn't work.
    My component code is added below, if anyone could show me how to get this to work it would be much appreciated.
    Thanks in advance,
    Xander
    GradientCanvas.as
    package mycomps {
        import flash.display.GradientType;
        import flash.geom.Matrix;
        import mx.containers.Canvas;
        import mx.styles.CSSStyleDeclaration;
        import mx.styles.StyleManager;
        public class GradientCanvas extends Canvas {
            private static var classConstructed:Boolean = constructStyle();
            public function GradientCanvas() {
                super();
                this.width = 100;
                this.height = 20;
            private static function constructStyle():Boolean {
                var style:CSSStyleDeclaration = StyleManager.getStyleDeclaration("GradientCanvas");
                if (style) {
                    if (style.getStyle("fill-colors") == undefined) {
                        style.setStyle("fill-colors", [0xffffff, 0x000000]);
                } else {
                    style = new CSSStyleDeclaration();
                    style.defaultFactory = function():void {
                        this._fillColours = [0xffffff, 0x000000];
                    StyleManager.setStyleDeclaration("GradientCanvas", style, true);
                return true;
            override public function styleChanged(styleProp:String):void {
                super.styleChanged(styleProp);
                if (styleProp == "fill-colors") {
                    this._fillColours = getStyle("fill-colors");
                    this._fillColoursChanged = true;
                    this.invalidateDisplayList();
            override protected function updateDisplayList(unscaledWidth:Number, unscaledHeight:Number):void {
                super.updateDisplayList(unscaledWidth, unscaledHeight);
                if (this._fillColoursChanged == true) {
                    var direction:Number = 90 * (Math.PI / 180);
                    var matrix:Matrix = new Matrix();
                    matrix.createGradientBox(unscaledWidth, unscaledHeight, direction, 0, 0);
                    graphics.clear();
                    graphics.beginGradientFill(GradientType.LINEAR, this._fillColours, [1,1], [0, 255], matrix, "pad", "rgb", -1);
                    graphics.drawRect(0, 0, unscaledWidth, unscaledHeight);
                    graphics.endFill();
                    this._fillColoursChanged = false;
            [Inspectable(category="Gradient", type="Array", format="Color", name="Fill Colours")]
            private var _fillColours:Array;
            private var _fillColoursChanged:Boolean = false;
            public function get fillColours():Array {
                return this._fillColours;
            public function set fillColours(value:Array):void {
                this._fillColours = value;
                this._fillColoursChanged = true;
                this.invalidateProperties();
                this.invalidateDisplayList();

    Never mind, I've discovered how to do it for myself.
    Thanks...

  • Button Width Via CSS?

    Hi -
    I tried setting a button <mx:Button> width via CSS but
    the "width" tag does
    not effect the button.
    Rich

    "width" is not a style. It is a property, so you can't set it
    via CSS.
    Depending on where your Button is located and why you want to
    use a
    style, you could set the "left" and "right" constraints,
    which will
    indirectly set the width based on the size of the Button's
    container.
    -- Greg
    -- Adobe Flex Builder Team
    Richard Morey wrote:
    > Hi -
    >
    > I tried setting a button <mx:Button> width via CSS
    but the "width" tag does
    > not effect the button.
    >
    > Rich

  • Table Borders + CSS

    Somehow the message was posted 3 times

    davidhelp wrote:
    > Table with border using css
    >
    > 1st question:
    > I have a table at the top of the page with a 1px red
    border
    > Right below and up against 1st table is another table
    with 1px red border
    >
    > In Firefox 1.5 and IE6 I see a 2px thick line
    >
    > How to fix it so I see only a single border line 1px
    thick where the 2 tables
    > meet?
    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01
    Transitional//EN">
    <html>
    <head>
    <style type="text/css">
    .border {
    border: 1px solid red;
    border-collapse:collapse;
    background: #FFFFFF;
    .border th {
    padding: 4px;
    background-color: white;
    border:1px solid red;
    .border td {
    padding: 4px;
    background-color: white;
    border:1px solid red;
    .border2 {
    border-collapse:collapse;
    background: #FFFFFF;
    border-right: 1px solid red;
    border-bottom: 1px solid red;
    border-left: 1px solid red;
    .border2 th {
    padding: 4px;
    background-color: white;
    border-right: 1px solid red;
    border-bottom: 1px solid red;
    border-left: 1px solid red;
    .border2 td {
    padding: 4px;
    background-color: white;
    border-right: 1px solid red;
    border-bottom: 1px solid red;
    border-left: 1px solid red;
    </style>
    </head>
    <body>
    <table style="width: 300px;" class="border">
    <tbody>
    <tr>
    <th style="font-weight: normal;">1st table</th>
    <td>1st table</td>
    </tr>
    </tbody>
    </table>
    <table style="width: 300px;" class="border2">
    <tbody>
    <tr>
    <th style="font-weight: normal;">2nd table</th>
    <td>2nd table</td>
    </tr>
    </tbody>
    </table>
    </body>
    </html>
    > 2nd related question
    > I create a table with a black border and I want to add
    another table without
    > any bordercolor to the same page using css
    > The table may be inside the 1st or outside the table
    >
    > How to do this?
    In much the same way as above - just create classes and apply
    the
    relative class to the relative table.
    HTH
    chin chin
    Sinclair

  • Problem regarding the creation of Table using CSS.

    Hi ,
    Here I have a Problem regarding the creation of Table using CSS.
    In My Application i have a table with multiple rows(Rows are Dynamically added to the table).First i am setting the table with the following properties:
    width:900px;
    height : auto,
    Overflow : visible,
    Max-height: : 200px.
    If I use above properties,I'm getting a table with 5 or 6 rows(height upto 200px).After that i am getting the Vertical ScrollBar.
    The problem is when a table has many columns, Vertical and Horizontal Scrolls are coming at the time of setting the table. The table height is not Increasing dynamically.
    How can i use "height" property in CSS? (I want the table height to be increased when the columns are more.)
    Thanks & Regards
    Madhavi

    Hey humble user. Errr I'm trying to understand what ur trying to do. U want to create a section of a region destructively from an existing region right? If so select the option convert to new region (opt-comm-R or selecting it by right clicking). Check your audio bin to make sure. Whats the "merge" function? Are u refering to the glue tool?

  • How to Sort Dimension in Pivot Table via Order Column which is changing like Factual values

    Hi,
    Recently in of our product offerings we got stuck on this following question:
    How to Sort Dimension based on the Order Value which Keeps Changing with Factual Values??
    We have a data source laid out as (example)
    In the above the “Order” columns are changing per
    Company/(DimensionA) for DimesnsionB.
    Instead what we want is: (But only if we can get the following result without putting the “Order” Column in the “Values” Section. 
    If there are any configurations that we can make to our power pivot model for the similar data set so that the
    DimesnionB in this case can be sorted by the Order column, would be greatly helpful to us. 
    Sample File:
    http://tms.managility.com.au/query_example.xlsx
    Thanks
    Amol 

    Hi Amol,
    According to your description, you need to sort dimension members in Pivot Table via order column, and you don't want the order column show on the Pivot table, right?
    Based on my research, we can sort the data on the Pivot table based on one of the columns in that table, and we cannot sort the data based on the columns that not existed on the Pivot table. So in your scenario, to achieve your requirement, you can
    add the column to pivot table and hide it.
    https://support.office.com/en-gb/article/Sort-data-in-a-PivotTable-or-a-PivotChart-report-49efc50a-c8d9-4d34-a254-632794ff1e6e
    Regards,
    Charlie Liao
    TechNet Community Support

  • Using Interactive Report with SQL query accessing tables via db link

    Is there a known issue with using the interactive report in version 3.1.2.00.02 with SQL that is accessing tables via a database link? I get the error 'not all variables bound', I do not get this error when using the standard report for the same SQL?
    Thanks,
    Edited by: [email protected] on May 26, 2009 2:59 PM

    Varad,
    Good question, failed to check that. In fact there are errors. Dump file c:\oraclexe\app\oracle\admin\xe\bdump\xe_s002_3640.trc
    Mon Jun 15 08:48:11 2009
    ORACLE V10.2.0.1.0 - Production vsnsta=0
    vsnsql=14 vsnxtr=3
    Oracle Database 10g Express Edition Release 10.2.0.1.0 - Production
    Windows XP Version V5.1 Service Pack 3
    CPU : 2 - type 586, 1 Physical Cores
    Process Affinity : 0x00000000
    Memory (Avail/Total): Ph:1051M/2038M, Ph+PgF:2273M/3934M, VA:1302M/2047M
    Instance name: xe
    Redo thread mounted by this instance: 1
    Oracle process number: 16
    Windows thread id: 3640, image: ORACLE.EXE (S002)
    *** ACTION NAME:(PAGE 2) 2009-06-15 08:48:11.743
    *** MODULE NAME:(APEX:APPLICATION 112) 2009-06-15 08:48:11.743
    *** SERVICE NAME:(SYS$USERS) 2009-06-15 08:48:11.743
    *** CLIENT ID:(ADMIN:232384011651572) 2009-06-15 08:48:11.743
    *** SESSION ID:(24.931) 2009-06-15 08:48:11.743
    *** 2009-06-15 08:48:11.743
    ksedmp: internal or fatal error
    ORA-07445: exception encountered: core dump [ACCESS_VIOLATION] [_LdiDateFromArray+55] [PC:0x608B04F3] [ADDR:0x0] [UNABLE_TO_WRITE] []
    Current SQL statement for this session:
    select Stage,Procedure,Stp,FW,Reslt,MSG,date_run
    from bi_msg_VW@dwitnm
    order by 1
    ----- PL/SQL Call Stack -----
    object line object
    handle number name
    2FE1EA14 1207 package body SYS.DBMS_SYS_SQL
    2FE1F064 328 package body SYS.DBMS_SQL
    2ABDC520 5097 package body APEX_030200.WWV_RENDER_REPORT3
    2BD5E55C 1538 package body APEX_030200.WWV_FLOW_DISP_PAGE_PLUGS
    2BD5E55C 366 package body APEX_030200.WWV_FLOW_DISP_PAGE_PLUGS
    335BDA88 11190 package body APEX_030200.WWV_FLOW
    2BDBD1C8 255 procedure APEX_030200.F
    2AB58D10 30 anonymous block
    ----- Call Stack Trace -----
    I didn't include the call stack, it is too large. Now I'm even more puzzled that the IR would work while a sql report would fail.
    Bob

  • Spry Photo Gallery Image Size via CSS

    Hello!
    I´ve been customizing the spry photo gallery for a couple of time, but got my little problem when viewing it on a mobile phone. When you load up the pictures with a size of 450 x 300 px for example, put up the right xml file with it´s width and height, so the gallery shows the pictures in that size. So what I want to do is that you can specify the image size with css depending on the device you´re watching the site with. There is div in the css called "mainImage" where the size is in %. When you change it to 75% for example. The pictures are correctly shown with 75% of it´s original size, but the outline (grey background) is still in 100%. When you make this grey background transparent it´s still there and moves the caption down. I guess there have to be done some changes within the SpryImageViewer.js, but I just know very little things about JavaScript. Do you have any clues how to change this to specify the image size via CSS?
    Thank you for your help!!!
    Kind regards,
    Joerg

    I see you are still using Spry 1.5. Have you considered upgrading to 
    Spry 1.6.1?
    Also your XML is broken, if you open up your xml in a normal standards 
    complaint browser such as firefox, you will see that it doesn't render
    a normal tree view as it would do with other xml files. So i suggest 
    checking those errors out.
    Its mainly because you  forgot to close your starting tag of the 
    gallerys node. (<gallery
    base = ""
    background = "#FFFFFF"
    banner = "#F0F0F0"
    text = "#000000"
    link = "#0000FF"
    alink = "#FF0000"
    vlink = "#800080"
    before your xml starts.

  • Cannot make a cache safe URL for "1025/styles/Themable/corev4.css", file not found. Please verify that the file exists under the layouts directory.

    HI
    i restored a sharepoint web 80 application in our test domain
    and after when i browse the new web application 
    it says 
    Cannot make a cache safe URL for "1025/styles/Themable/corev4.css", file not found. Please verify that the file exists under the layouts directory. 
    adil

    Hi  adil,
    According to your description, my understanding is that you encountered the error “Cannot make a cache safe URL for "1025/styles/Themable/corev4.css", file not found. Please verify that the file
    exists under the layouts directory.” .
    The issue happens in
    We have customized master page
    In the master page, we use path the script/style file like this: <SharePoint:CssRegistration name="<% $SPUrl:~SiteCollection/Style Library/coe/mainCOE.css%>"
    runat="server"/>
    While using the dynamic path in a multiple languages enabled site, language Id(1033 etc) will be added to the path automatically. That cause the file to be not found.
    To solve the issue, please download  the Arabic language pack http://www.microsoft.com/en-us/download/details.aspx?id=3411 ,
    install it on  your SharePoint and refresh your browser.
    Reference:
    http://sharepoint-community.net/profiles/blogs/cannot-make-a-cache-safe-url-for-1036-sytles-themable-corev4-css
    Best Regards,
    Eric
    Eric Tao
    TechNet Community Support

  • Send An Internal Table Via Excel File As An Attachment of E-mail

    Hi,
    I've sent my internal table via Excel file as an attachment of email but all records of internal table are in a row of sended excel file.
    How can i send an internal table via excel file , records of internal table for each rows of excel file,as an attachment of email correctly?
    CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
           EXPORTING
                document_data              = w_doc_data
                put_in_outbox              = 'X'
                sender_address             = ld_sender_address
                sender_address_type        = ld_sender_address_type
                commit_work                = 'X'
           IMPORTING
                sent_to_all                = w_sent_all
           TABLES
                packing_list               = t_packing_list     "   t_packing_list-doc_type   =  'XLS'.
                contents_bin               = pit_attach " this is a normal internal table.
                contents_txt               = pit_message
                receivers                  = t_receivers
           EXCEPTIONS
                too_many_receivers         = 1
                document_not_sent          = 2
                document_type_not_exist    = 3
                operation_no_authorization = 4
                parameter_error            = 5
                x_error                    = 6
                enqueue_error              = 7
                OTHERS                     = 8.

    Hi,
    CLASS CL_ABAP_CHAR_UTILITIES DEFINITION LOAD.
    CONSTANTS:
    CON_TAB TYPE C VALUE CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB,
    CON_CRET TYPE C VALUE CL_ABAP_CHAR_UTILITIES=>CR_LF.
          LOOP AT T_FINAL INTO WA_T_FINAL.
            CONCATENATE WA_T_FINAL-PERNR
                        WA_T_FINAL-NAME
                        WA_T_FINAL-LEVEL
                        WA_T_FINAL-POS
                        WA_T_FINAL-JOB
                        WA_T_FINAL-SECTION
                        WA_T_FINAL-DEPT
                        WA_T_FINAL-GROUP
                        WA_T_FINAL-EX_HEAD
                        WA_T_FINAL-SUPID
                        WA_T_FINAL-SUPNM
                        WA_T_FINAL-FHRNM
                        WA_T_FINAL-VACID
                        WA_T_FINAL-VAC_SECTION
                        WA_T_FINAL-VAC_DEPT
                        WA_T_FINAL-VAC_GROUP
                        WA_T_FINAL-VAC_EX_HEAD
                        WA_T_FINAL-VAC_FHRNM
            INTO T_FINAL3 SEPARATED BY CON_TAB.
            CONCATENATE CON_CRET T_FINAL3 INTO T_FINAL3.
            APPEND T_FINAL3.
          ENDLOOP.
    *Fill the document data.
      W_DOC_DATA-DOC_SIZE = 1.
    *Populate the subject/generic message attributes
      W_DOC_DATA-OBJ_LANGU = SY-LANGU.
      W_DOC_DATA-OBJ_NAME = 'REPORT'.
      W_DOC_DATA-OBJ_DESCR = LD_MTITLE . "mail description
      W_DOC_DATA-SENSITIVTY = 'F'.
    *Fill the document data and get size of attachment
      CLEAR W_DOC_DATA.
      READ TABLE T_FINAL1 INDEX W_CNT.
      W_DOC_DATA-DOC_SIZE =
      ( W_CNT - 1 ) * 255 + STRLEN( T_FINAL1 ).
      W_DOC_DATA-OBJ_LANGU = SY-LANGU.
      W_DOC_DATA-OBJ_NAME = 'SAPRPT'.
      W_DOC_DATA-OBJ_DESCR = LD_MTITLE.
      W_DOC_DATA-SENSITIVTY = 'F'.
      CLEAR T_ATTACHMENT.
      REFRESH T_ATTACHMENT.
      T_ATTACHMENT[] = PT_FINAL1[].
    *Describe the body of the message
      CLEAR T_PACKING_LIST.
      REFRESH T_PACKING_LIST.
      T_PACKING_LIST-TRANSF_BIN = SPACE.
      T_PACKING_LIST-HEAD_START = 1.
      T_PACKING_LIST-HEAD_NUM = 0.
      T_PACKING_LIST-BODY_START = 1.
      DESCRIBE TABLE IT_MESSAGE LINES T_PACKING_LIST-BODY_NUM.
      T_PACKING_LIST-DOC_TYPE = 'RAW'.
      APPEND T_PACKING_LIST.
    *Create 1st attachment notification
      T_PACKING_LIST-TRANSF_BIN = 'X'.
      T_PACKING_LIST-HEAD_START = 1.
      T_PACKING_LIST-HEAD_NUM = 1.
      T_PACKING_LIST-BODY_START = 1.
      DESCRIBE TABLE T_ATTACHMENT LINES T_PACKING_LIST-BODY_NUM.
      T_PACKING_LIST-DOC_TYPE = LD_FORMAT.
      T_PACKING_LIST-OBJ_DESCR = 'Application 1'.
      T_PACKING_LIST-OBJ_NAME = 'Application 1'.
      T_PACKING_LIST-DOC_SIZE = T_PACKING_LIST-BODY_NUM * 255.
      APPEND T_PACKING_LIST.
      CLEAR T_PACKING_LIST.
    *Add the recipients email address
      CLEAR T_RECEIVERS.
      REFRESH T_RECEIVERS.
      T_RECEIVERS-RECEIVER = LD_EMAIL.
      T_RECEIVERS-REC_TYPE = 'U'.
      T_RECEIVERS-COM_TYPE = 'INT'.
      T_RECEIVERS-NOTIF_DEL = 'X'.
      T_RECEIVERS-NOTIF_NDEL = 'X'.
      APPEND T_RECEIVERS.
      CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
        EXPORTING
          DOCUMENT_DATA              = W_DOC_DATA
          PUT_IN_OUTBOX              = 'X'
          SENDER_ADDRESS             = LD_SENDER_ADDRESS
          SENDER_ADDRESS_TYPE        = LD_SENDER_ADDRESS_TYPE
          COMMIT_WORK                = 'X'
        IMPORTING
          SENT_TO_ALL                = W_SENT_ALL
        TABLES
          PACKING_LIST               = T_PACKING_LIST
          CONTENTS_BIN               = T_ATTACHMENT
          CONTENTS_TXT               = IT_MESSAGE
          RECEIVERS                  = T_RECEIVERS
        EXCEPTIONS
          TOO_MANY_RECEIVERS         = 1
          DOCUMENT_NOT_SENT          = 2
          DOCUMENT_TYPE_NOT_EXIST    = 3
          OPERATION_NO_AUTHORIZATION = 4
          PARAMETER_ERROR            = 5
          X_ERROR                    = 6
          ENQUEUE_ERROR              = 7
          OTHERS                     = 8.
    Edited by: Rahul Ghosh on Apr 6, 2009 6:42 AM

  • Inserting Into MYSQL Table Via Air/PHP = Not Allowed?

    I'm having trouble inserting data into my mysql database tables through my air app. All the code is pretty much exactly the same as in some examples I've seen but it simply won't do it. Is this because of some sort of security restriction because the air app is on my machine and the server with my mysql database on is elsehwhere? Or is it possible to insert data via an air app?
    Here is the example I've been following:-
    http://livedocs.adobe.com/flex/3/html/help.html?content=data_access_2.html

    jimmyoneshot wrote:
    Thanks for the answers boys. I've decided I'm going to change it into a flex app instead as then there won't be any problems. It simply means I'll have to add a logon system to it.
    While were on the subject do you guys happen to know of any examples anywhere of how someone can REMOVE data from an sql table via flex/php?
    What I'm looking for is basically when a user uses my app and enters info into some text inputs, if that specfic info exists within a table then that data will be removed from the table. The way this works is that they will choose an item within a tilelist which is populated by the data from this mysql table and this will insert the data of the selected item into the text inputs and then they click a remove button to remove that item. Can't find anything similar anywhere though.
    You will have to use a common identifier, eg:
    give each row in your database an ID.
    then pass that ID value on the button press to a PHP script, which does something like:
    $deleteID = $_POST["delID"];
    mysql_query("DELETE FROM exampleTable WHERE ID='$deleteID
    maybe check that a row with that ID exists first for verification, then pass back a value indicating if removal was a success or not.
    You can delete on other values, but remember they have to be unique for the database, else you'll run the risk of deleting multiple values.
    Or you could delete on a compound key, depends on the data you're storing in the grid.

  • Looking for Table to CSS Converter

    I'm asking the Dreamweaver Community for HELP...
    I currently own CS3 of Dreamweaver and while there are some
    ways to convert tables to a css format manually.
    Is anyone using a software or a work-a-round to automate this
    process of converting TABLES to CSS automatically.
    For example i have DOZENS OF HTML pages that are loaded with
    Nested Tables... and all i want to do is run that HTML page through
    a TABLE to CSS converter.
    And then that’s it... you're done!... no tedious copy
    and pasting converting one table at a time.
    Does CS3 have something I’m missing that would remedy
    this or make Converting Tables to CSS more automated and not
    one-at-a-time converting?
    Thanks for any suggestions or links.

    A well built page with tables is infinitely more
    representative of your work
    than the train wreck that results when you convert tables to
    layers.
    Put a 5x5 table on the page, merge and split some of the
    cells, add some
    content to each cell, and convert to layers. Look at the
    incredible mess
    you have now in your code. Preview in a browser, and expand
    your text size
    in the browser. Look at the incredible mess you have in the
    browser.
    I think your approach is COMPLETELY wrong.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "RegGFX" <[email protected]> wrote in
    message
    news:[email protected]...
    > Thanks for helping me find the Convert to Divs button...
    i'll test it out.
    > I
    > went on the web and googled Table2CSS and found some
    interesting tools...
    > In regards to the question about Converting Tables to
    Divs or pure css....
    > In reply too:
    >
    quote:
    Question is why do you want to do this? To say that there are
    no tables
    > in
    > the page?
    > Well that seems to be the NEW RAGE(actually its not new
    though)... create
    > websites without TABLES.... google it on the Web and
    you'll see all the
    > responses. Its almost as big a argument as MAC vs. PC
    all though we know
    > that
    > "Talent" is what drives creativity... the tool is just a
    tool to
    > accomplish
    > your job...but thats for another discussion
    > Anyway back to the CSS design vs. Table design website.
    >
    > I had 2 friends who went on job interviews where they
    showed samples of
    > their
    > websites to 3 different large corporations and all 3
    interviews said "we
    > want
    > to see websites .
    WITHOUT tables and using only CSS and or DIVs." as
    > samples for their portfolios
    > WOW... i thought so....
    > I've talked to a number of other friends in large
    companies and this is
    > the
    > going trend now... Design TABLELESS Websites (if you
    google that you'll
    > find
    > that as well) and use only pure CSS. Many company's are
    doing this I think
    > its
    > because knowone can seem to figure out Tables.
    >
    > Now i personally have been designing websites for a
    little over 10 years
    > and
    > have never had issues with Tables to design a website
    although i do
    > understand
    > the arguments behind load times... I think its because
    some out there
    > still
    > haven't got the nack of how to design a website and
    limit the load times
    > while
    > still using Tables.
    >
    > So in view of the feed back i've been getting about this
    pure CSS website
    > and
    > no tables trend, I've been converting some of my 10 page
    client websites
    > to
    > PURE CSS just because i got an inside tip that company's
    will pay big
    > bucks to
    > convert their website to PURE CSS and no tables just
    becuase another
    > I.T.executive consultant said that is the route to go.
    >
    > Again... for me... its all about knowing how to optimize
    your webpages
    > whether
    > you're doing Tables or Pure CSS.
    > Its also about if your website makes the user have to
    "THINK TO MUCH"...
    > you
    > can build a cool website design with out making the user
    "Think To Much"
    > such
    > as How long is this website going to take to load, or
    why is it so
    > complicated
    > to navigate with all these uncessary tables and
    etc...but again the "Don't
    > Make
    > Me Think" syndrome is for yet another discussion
    >
    > Anyway... thanks for the tip about Dreameweaver's
    "Convert" button....
    > i've
    > tried it and its ok... but it needs alittle refinement
    on automation. (for
    > example it would be nice if it put the CSS in a TAG up
    in the head like a
    > Table2Css conversion tool i found.)
    >
    > Best Regards,
    >

Maybe you are looking for

  • Apple ID change issue

    G'day I am having problems with my apple ID on my ipad 2 ... I had to let a work mate use my ipad for a couple of weeks and he has entered his own apple ID to download program's I have gone into the setting and changed it back to mine and this is wor

  • HT1711 why do I have to double click everything now in itunes?

    Hello everyone, I'm not an expert on the Itunes program so this could be a dumb question, but I'll try to explain this in clear detail and be as brief as possible. Earlier versions of Itunes did not have this feature or issue, so it was when I update

  • JAVA Patches not deployed properly-System restore back

    Hi Experts! recently we had deployed JAVA patches on EP development box but we are facing lot of problems with functionality and etc.Before going to deployment,we took backup for file system as well database.So we are planning to restore it back.My d

  • Need Help With Image Gallery

    Hey all, I need a simple image gallery to load when you click a button.  I've tried shadowbox but have had absolutely zero luck. I'm not sure how to load it from a flash file and I know there is work that has to be done outside of flash like in the r

  • Sync Nokia 8800 with Mac OsX

    Hi. Does anyone know how to sync a Nokia 8800 with Mac OsX, in order to get all contacts over to an iPhone. Is there a free software out there (whyever Nokia doesn´t provide one). Thx, Mike Solved! Go to Solution.