Sub contract PO from sales order

Hi,
I want to create a sub cotract PO for material A from a sales order (a PR will be created from the sales order and linked to the sales order in VA01). The PO will have item category L and account assignment M.
The issue with that is the component for material A in PO, there is no ATP stock, though I am sure there are ATP there. I tried a PO for the A create from ME21N directly, and the ATP stock is found.
Does anybody know why and how to fix it?
Thanks
Steven

If you have different vendors for items on a sales order, you will have to create different POs.
Assuming all items go to the same vendor, you can consider a simple customization as follows
Write a before-insert trigger on the po_requisition_lines_interface and make the requisition_number or group_code same for all items on a given Sales order.
That will make the Requisition Import program put all such lines on one requisition.
Hope this helps,
Sandeep Gandhi

Similar Messages

How to create Subscription Schedule for a Contract created from Sales Order

Hi Gurus,
Need help in creating subscription contracts from Sales Orders.
We know that Service Contract is created from Sales Orders by adding covered item and service item as two lines in a Sales Order.
1. Does anyone know how to a create Subcription Contract by adding single item or BOM item(Model) to a Sales Order?
2. Can we have a BOM item created as Subcription item and reference this to the Service Item in the Sales Order, so that we get the Service Contract created with the BOM item as Covered line.
3. Whenever we create the Service Contracts from Sales Orders, the Billing Schedule Level is set to 'Top Level'. Can we get this changed to 'Equal Amount' by using any profile options.
Please advise as we are in a critial design phase and need to make a decision quickly.
Thanks,
Sid

Hi Mani,
I have a similar requirement but i need to transfer the values to the same page... what then. I have seen the developers giude and the example shows how to tansfer values to another page but no clues what so ever if i have to transfer them to the same page different region. Do u have any suggestions ....
Regards,
Amit.

Sending Components to SC-Vendor from Sale Order Stock

Hi
Anybody can throw some lights on following Issue..
Our Customer is Placing Order with Us.It is an MTO Scenario.
The Product is Assembly
In that Assembly, we have to Send some components to our Sub Contracting Vendorand get back one HALB Product.
To create Sub Contracting POI have to create PO in ME21N with Item Category L and Acc.***.Category EHere In Item Details, Material DataThe BOM is getting Exploded..
Now I want to send my Components( Which is also belongs to Spl.Stock E) to my SC-Vendorin ME2OBut Here I am not getting any Selectionie) the Components which I want to send to my SC-Vendor based on that PO from Sale Order Stock E is not flowing in ME2O
Pl. Guide me How can I send components to my SC-Vendor based on my PO with Item Category L and Acc.***. Category E
Your Immediate response in this is highly appreciated
Regards
S.Baskaran.

use tcode MB1B with movement type 541 and choose TO PURCHASE ORDER and give the purchase order details here.
regards,
indranil

Transfer of material from sales order stock to subcontractor

Iam having subcontracting operation in routing. But i am not able to transfer of material from sales order stock to subcontractor when i do 541 movement

Dear Mayuresh,
You cannot move Sales Order assigned material directly to Sub contracting Vendor stock.
For doing so firstly unassign the Sales order stock by transaction MB1B & movement type 411E.
After this you can provide the stock to the vendor by transaction MB1B & movement type 541O.
Other way is to create account assigned Purchase Orders. Thereafter create virtual sub contractor storage location in your plant. Transfer your Sales Order assigned material to these Virtual locations so that you can see the stock provided to the vendor. Now during Goods Receipt of the finished goods you can consume the material by movement type 543E.
Regards,
Subha.

Creation of Sub Contracting PO through Maintenance Order

Dear All,
I am aware of the sub contracting indicator to be cliked in the maintenance order in order for the system to generate a Sub Contracting PO through Maintenance Order. However I am unable to see this indicator in maintenance order fields.
Is there anything that I am missing in customising settings or is this related to activation of any business function sets.
I am working in ECC 6.0 EhP 5.0.
Need your help / inputs so as to resolve my issue.
Thanks in advance.
JK

Hi Tehsin,
Thanks for ur response.
However this is something I am aware of. The settings suggested by you will automatically generate a PR with Account Assignemnt Category as 'Order' (F) & Item Category as 'Service' (D) combination.
I am looking for the auto generation of PR through the maintenance order with Account Assignemnt Category as 'Order' (F) & Item Category as 'Sub Contracting' (L) combination.
Looking forward to hear from all.
Thanks in advance
JK.

Quantity is different from sale order and delivery

Hi,
Gurus,
Quantity is different from sale order and delivery.
I identified the Material in the sales order, the item category for this material as BOM.
I have also checked the bill of material display header overview. The Base Quantity maintained as 1000 EA3. The SUBITEM maintained in G in the unit field in bill of material display.
Accordingly i have checked the same for material master's additionl data in Units of Measure tab, it is mentioned the basic unit as 1000 EA3 and alternative unit as 600 G.
My client processed the order for 100 QTY. The QTY for the two sub item is 99.601 each in the sale order.
My client Question is why in delivery the Material Qty is coming as 99.730 and the SUB ITEM is coming as 99.330 EACH.
Note:- The material X is maintained in EA3 in Bill of material header overview. I do no how the sale unit came as G for the Material in sale order.
The other two sub item is perfectly coming as G. Because it is maintained in G in the Bill of Material Display.
Guide me GURUS.
Thanks and Regards,
ANAND

Hello Rumar
I guess you entered the text manually in the sales order. The Ship-to may not be having any text, but the Sold-to may be and it may be coming from sold to.
In transaction VOTXN, check the access sequence for the text type id and see which one takes precedence - one from customer master or from the order by checking the order of accesses.

Sales order with reference to Contract and another sales order

Hi Gurus,
I would like your suggestions on one of the business requirement i have.
We are creating a new EDI interface with few of our customers to create sales orders. While creating sales orders, it should validate if there are any open contracts available and if yes, then the sales order should be created with reference to it. so far good but there are chances that sold to party on the contract could be different from sold to party on the EDI order sent by customer (customer can have more than one sold to party on their system). IDOC's are failing in this scenario and not able to create a sales order since sold to partys are not matching. I need your help.
Can we do some thing in customer master to handle this scenario?
or
Create a new sales doc type (YEDI or some thing) and create sales order from IDOC without reference to contract. Business will look into all YEDI order and create the actual sales order out of it but the challenge here is i cannot refer contract to the actual sales order or YEDI order.
Is it possible to create sales order with ref to a contract and another sales order?
Please help
Thanks
Venkat

Hello Venkat
What is the linkage between sold to party of contract and sold to party of order..If customer has more than one sold to party.
Why don't you use customer hierarchy....link all sold to party of a customer to hierarchy node.for example...you create a hierarchy node 1000 and assigned customers 2000 and 3000 to it.you have contract for 2000..so when you create a sales order for 3000 check in knvh table it's customer hierarchy 1000 and get all sold tos assigned to hierarchy...which is 2000....check if contract exist for sold to's..If yes then create order with reference.
Let us know if it works for you.
Thanks
Amit Gupta

Different ship to party for one of two line items from sales order

Hi Experts,
1. The Sales Order No.19701 is an Export Order, received from M/s. Industries & Construction, Indonesia. We have to supply all the materials on FOB Indian seaport basis.
2. However, we have to dispatch against Line Item No. 280 & 290 to one of our subvendors, M/s.Industries, sec,rabad to complete some Control Assly. as per agreed Inspection terms.
3. After completion of Control Assembly & Client's Inspection materials will be finally dispatched to nearest Seaport for seafreight.
So here i can i map this scenario from sales order to billing, ship to party for those 2 items must be sub vendor.
Thanx in advance
Madhu

Hi madhusudan
You can map different ship to party . First you need to configure customer master for the same.
Add the alternate ship to parties to customer master of sold to party, your export customer.
While creating master data for sub vendors as ship to party ,you need to maintian proper customer pricing pricing procedure and tax classification as you mentioned customer is export customer ,but ship to party seems to be domestic ,so carefully check the same. also check the shipping condition if it is separate for exports.
Then in Sales order transaction on line item data ,change your ship to party for the line item as per the the requirement.
for further processing of this scenario ,like excise invoice and ARE1 u might have lsome issues if ship to party is liable for duties and taxes and Sold to is exempt and you are drawing only one invoice for these 2 separate deliveries. pl check on the same.
I hope this helps
Revert for any queries
Regards
Mandar
Edited by: Mandar Deshpande on Apr 13, 2010 11:04 PM

Need error mssg for contract qty in sales order

Hi SD Gurus
I have created a Quantity contract for XYZ material with say 100 qty. Now if i create a Sales order with reference to the contract, in the sales order i can manually change the quantity to more than 100.
Here the system just gives me an warning message that qty has exceeded the contract qty.
I want to make it a error message. In short i do not want to create a sales order of more than the contract qty.
Checked completion rule for contract item category KMN. But its just giving warning message.
Regards
Abhijeet

Hi
Abhijeet
Please find my post on the same subject/ problem. Please click below link...
Call off order restriction
Check this as well...
Copy control to copy quantity from Order to contract
>OR
Please follow the path
SPRO --- Industry Solution Oil & Gas (Downstream) -MCOE (Marketing, Contracts and Order Entry)--Define contract restrictions agsinst yr sales doc type in the field of QTY PUT E.
Hope this helps you..
Thanks and Have a Nice Day !
DK:)
Edited by: Dwarkesh Thakkar on Jun 27, 2011 7:47 PM

Creation of automatic PO from sales order in 3rd party scenario

hi ,
we know, as per standard SAP , creation of PR from Sales order happens when we save SO. how to create PO automatically from sales order? and where where to put document type for that PO ? ( in schedule line category we can set document type for PR)

Hello
In addition to what Kapil suggested,
3 - The Outline Agreement or Purchasing Info Record shall be maintained which will allow the automatic copying of unit price and other conditions into PO and
4 - The Source List shall be maintained for the nominated vendor which was shown in either the Outline Agreement or Purchasing Info Record.
By activating those config you can automatic create PO from PR.
For that use TCode ME59 to automatically convert the current PR into PO.
But, you can not automatically generate PO from sales order similar to that of PR.
Thanks & Regards
JP

Creation of PO from Sales Order

Hi
Please let me know if there is any standard oracle functionality by which we can ensure that Purchase Orders does not contain items from sales orders. e.g. if there are multiple sales order then one PO should be generated for each sales order.
At the time of Requisition Import, we can specify the parameters like
1.     Buyer
2.     Category
3.     Item+
4.     Location
5.     Vendor
There is no parameter like Sales Order , so we’ll end up creating PR from multiple sales orders and then PO would be created from PRs.
Let me know if we can achieve the functionality of create unique PO for each Sales Order.
Thanks,

If you have different vendors for items on a sales order, you will have to create different POs.
Assuming all items go to the same vendor, you can consider a simple customization as follows
Write a before-insert trigger on the po_requisition_lines_interface and make the requisition_number or group_code same for all items on a given Sales order.
That will make the Requisition Import program put all such lines on one requisition.
Hope this helps,
Sandeep Gandhi

Address not copied from Sales order/Delivery to Shipment Document

Hello Experts,
I need your help on Addrss of ship to in shipment document.
Sales Order[VA01] >> Delivery [Vl01N]>> Shipment [VT01N].
User changed the Address of ship to party (Header level) in Sales Order and It reflected to delivery as well and I believe It should also update the address in Shipment document.
But when I checked the Address of the Customer/Unloading point in Shipment Document [VT03N] (as below) I found It was not updated It was same as Customer Master Record and I believe It directly copied from Customer Master Record.
BUT While creating the Shipment system is copying the data from Customer master Record not from Sales Order /Delivery. Logically system should copy the updated address from Order/Delivery BUT It is directly copying from Customer Master i don't know where is the setting of this ??
Can anybody help me on this ? How system takes the customer (ship to party) address in shipment ? Where are the setting of these.
What I need to do so system take the updated address from Sales Order/Delivery not from Customer Master Record (Ship to party).
Can I change the address of customer in shipment document ??
Awaiting your precious reply.
Thanks,

Hello Samir,
Thanks for your response.
I think you get my question in wrong way.
I am sayingCustomer master data was not changed.
User just changed the Address in Order (Order > Header >> Partner tab >> Change ship to address/overwrite ship to address).
Overwritten Address / Updated address are copying in Delivery BUT not in Shipment document.
What I need to do? system should copy the updated address from Sales Order/Delivery BUT it is copying from Ship to party.
I hope this time i am clear to explain my issue.
Thanks,

Revenue not flowing from Sales order to PS so no WIP in PS/WIP

Hi,
We are following PS with MTO scenario.
For calculating WIP in projects we are unable to get the actual revenue flow from Sales order to PS so entire amount in PS/WBS is sitting in WIP but its wrong.
User wants to do the Delivery and billing form Sales order only.
Can you please help us how to calculate the WIP in this scenaio.
Thanks,

Hi,
Have you made the account assignment as WBS Element in the SO line item. Ift his is done, once you create an invoice from SO the actual revenue will get updated in WBS Element.
Regards
Sreekanth

Delivery from Sale Order for Inquiry stock

Dear All,
We have unique requirement from client mentioned below, any help would be greatly appreciated.
This is a trading sale which is initiated from inquiry.
1. Inquiry is created in SD, which in turn triggers Purchase Requisition.
2. PR is converted to RFQ.
3. Based on RFQ prices are negotiated with vendors, then Quotation is sent to Customer from VA21 which is created against inquiry.
4. Now when the PO is created w.r.t RFQ, then GR is done , Stock will be lying against inquiry.
5. But i want to do delivery from sales order for stock lying against inquiry.
we are looking for a workaround solution.
Note:
1. Client has disagreed with Stock Movement from Inquiry to quotation using MB1B, as it becomes manual transaction.
2. PR triggering has to be @ Inquiry, as sale order will not be created until quotation is approved.
Looking forward for valuable inputs.
Thanks in advance
Best Regards,
Chaithru

Tien,
Approval will not work when you have mutiple rows of data. You would have to work with SP Transaction Notification
There has been threads before on the forum on the same topics.
Block the Quantity in Sales Delivery
Approval Procedure for chaning quantity in Delivery Document
Suda

Can't change quantity when copy from Sale order for Delivery

Hi all!
Can i use authorization for can't change quantity when copy from Sale order for Delivery.

Tien,
Approval will not work when you have mutiple rows of data. You would have to work with SP Transaction Notification
There has been threads before on the forum on the same topics.
Block the Quantity in Sales Delivery
Approval Procedure for chaning quantity in Delivery Document
Suda

Sub contract PO from sales order

Similar Messages

Maybe you are looking for