Subcontracting error

Hi Gurus
This is standard subcontracting process. I had done transfer posting and now ready to receive final assembly from vendor.
While doing GR in subcontracting, i am facing the following error " Fld selectn for mvmt type 543 / acct 400020 differs for Asset retirement (016)" . Can anyone tell where i am making mistake..Is there any config missing ?
Plz help
Regards,
AB
Edited by: Csaba Szommer on Aug 12, 2011 4:18 PM

hi..
Go to FS00...enter ur G/L account....and at 3rd tab..Create/Bank/interest.. there is one field for Field status group...click it.here u will get. field status varient and field status group...
then go OBC4...here open ur filed status variant...and field status group..
here u wil get theselect group...
here check groups.. asset accouting..here u will get the asset retirement field which will be supressed...
so click on optional button and save it..
error will be resolved..
Thanks

Similar Messages

Subcontracting error - MIGO posting

Dear SAP Gurus,
I have raised the sub contract PO and have posted subcontracting challan using J1ifo1 for which i have configured CIN setting for this. while posting J1IF01 i was getting error "excise modvat account not defined for 57FC and for P2 excise group which has been resolved. I have configured the setting for 57FC, 57CM and 57 NR with ETT and Sub Trxn type and assgined the same in specify the excise trnx and G/l accouts.
Now I want to post goods receipt from subcontract using MIGO, system is giving the error -* "excise modvat account not defined for GRPO and for P2 excise group"*
I am executing the sub contracting without payment of excise duty secenario.
Also, I have maintained all the G/L account setting for GRPO such as
1) GRPO CR Cenvat clearning account
2) GRPO DR Cdenvat onhold account
3) GRPO DR RG23 AED account
4) GRPO DR RG23 SED account
5) GRPO DR RG23 BED account.
Please suggest any other accounts need to be maintained in ETT, subtransaction type, subcontracting sattributes and G/L account.
REgards,
Prashanth

Yes, I have maintained,
1) Subtransaction type 01.
2) Subcontracting attributes with GRPO for cenvat clearning a/c, cenvat hold , RG23D AED, SED, BED.
3) Maintained specify excise transaction per excise invoice for GRPO.
4) In specify G/l a/c for excise tranasction - for the combination of ETT, SType, CC and INT - I have maintained Modvat clearing a/c
Same error...

Subcontracting Error at GRN

Dear Expert,
I am doing a Subcontracting scenario.
At the time of GRN an error throws " Account xxxxxxx requires an assignment to a CO object"
The GL is subcontracting expense GL.
I have searched every where all are saying to maintain the GL in OKB9 and give cost center there or
Enter default cost center in cost element.
But my question is I do not want to post to this single Cost center.
Cost Center changes according to the Subcontracting order.
Is it possible to assign one GL to different Cost Center or is it possible to enter manually while doing GRN.
Since this line is automatically generated line item we cannot possible give manually.
Can someone give a solution for this.

Hi,
Go to SPRO > Logistics - General > Tax on Goods Movements > India > Basic Settings > Maintain Excise Registrations > From here deactivate "Indicator NCCD" for your Excise Registration and then check.

PP/DS Subcontracting error "/SAPAPO/RRP327"

Hello,
we setup subcontracting for trading goods in APO. Now i get for some materials the following error if i run the product
heuristic
Order not created for product XY location AB date 05.10.2010 00:00:00 quantity 3 ST
"Messg. No: /SAPAPO/RRP327".
If i try other products it works fine.

Hello nandha,
in the log i see only the error in my first post. No other things mention there.
kind regards,
Bernhard

Subcontracting: error during GI for components for SC PO with HU

Dear Experts,
Currently I am using ECC 5.0, IMWMHU for a receiving storage location.
The problem is as follows:
1. I've transferred 10 EA of component A to Vendor's Sub-Co stock using movement 541 via MIGO from HU-relevant SLOC
2. SAP created outbound delivery, I've created/confirmed TO, HU was assigned correctly. I've posted goods issue from using VL02N without any problems. Vendor's SC stock was updated (ME2O shows correct quantities), delivery status is completed.
3. Now, I want to consume the components and produce the assembly and here I am facing the issue. In MIGO - GR for PO assembly and a component are displayed. I assign the batch and all required information (I am receiving to HU-relevant SLOC). When posting the goods movement SAP issues strange message: "Notified quantity exceeded by 10 EA. Message no. M7248". When I remove the tick-off from the component to be consumed, the inbound delivery for assembly is created without any problems.
I've tried the same flow with receiving SLOC changed to only IM relevant (no HU, no WM) and the posting went through without any problems, consuming and receiving correct materials.
Have you encountered this problem before? OSS note 501686 seems to be about this problem, but it refers only to 470 and the field the note refers to says "B - Source stor.locat.HU-managed. Dest.stor.locat.not HU-managed", which is correct.
Thanks for any help,
Jacek

Hi Jacek,
Did you ever find a solution to this issue, maybe by working with SAP? I am actually facing the exact same issue (I am doing subcontracting in an WM and HUM managed facility), and I am wondering how you were able to solve it.
Thanks,
Adam

Erro 8B260 (Processo de Entrega Futura)

Bom dia, Pessoal!
Estou com um problema no processo de devolução de entrega futura.
Realizei a entrada da nota de fatura normalmente atraves da MIRO e da nota de remessa atraves da MIGO (mov 801).
O fornecedor nos enviou as notas de Fatura e Remessa como de entrada pois ele ainda não tem a obrigação legal da NFE, porém a empresa aonde estou já está obrigada a utilizar a NFE e ao realizar a devolução o sistema não encontra a referencia da nota de remessa. A mensagem de erro é a 8B 260 (NOTA FISCAL DE REFERÊNCIA XXXXX NÃO FOI ENCONTRADA)
O pedido está somente com a opção de parceiro FO o processo já foi criado sem a opção de parceiro "FM" (Fornecedor da Mercadoria).
As Notas Abaixos já estão aplicadas:
NF:
1055401 Subcontracting Returns doesn't find reference Nota Fiscal
NF-e:
1175538 NF-e Reference between NF and NF-e
1238765 NF-e: Returns for Subcontracting - Error 8B287
1257933 NF-e: Reference NF not found by return for subcontracting
1288925 NF-e: References between NF-e and non NF-e
1356952 NF-e: Returns for Subcontracting - Error 8B260
Estive debugando a função J_1B_NF_DOCUMENT_SELECT_2 e o que pode verificar é que como o processo de fatura/remessa é gerado atraves de uma nota de entrada ele armazena as informações J_1BNFDOC-NFNUM porem ao realizar a devolução, como a empresa que estou é obrigada a emitir a NFE a função realiza a busca no campo J_1BNFDOC-NFENUM com o numero da nota de remessa (NFNUM) por este motivo não é encontrado a nota de referencia e o erro é apresentado.
Eu procurei por alguma nota que pudesse corrigir meu problema porém não encontrei nenhuma aplicavél, alguem tem alguma ideia de como resolver este problema?
Obrigado
Gustavo

Olá xará,
tudo certo?
Esse erro provavelmente está ocorrendo porque existem múltiplos parceiros atribuídos ao Pedido de Compras.
No procesos de entrega futura, contudo, o sistema comporta somente a utilização de um parceiro, do contrário o processo é interpretado como sendo uma operação triangular.
Abraços

Error while creating PO in operation subcontracting

I am getting an Error while creating PO in operation subcontracting.When I'm trying to convert the purchase requisition for the operation in the routing into a Purchase order it gives me the error "Not possible to determine any components".Please guide me why I am getting this error. I have already assigned the component to the operation in the routing. I also have this component in stock. But no Idea why I'm getting this error

Hi Sam,
please check ,
Assign a recursive BOM for the material for which you want to create the purchase order .ie. create a BOM of mat say X having a component X and marking the indicator recursive ticked.
Please create the BOM which is valid much before the date of creating a purchase requisition .
And proceed for the creation of subcontract purchase requisition.
Please Revert back, if the problem is solved.
OMKAR

Error while posting GR for subcontracting process

Dear Friends,
while creating a GR for a subcontracting PO, I get the following error. please suggest what to do. i checked the configuration for the movement type and could not come up with the solution.
Fld selectn for mvmt type 543 / acct 7449990 differs for Vendor goods movement (014)
Message no. M7093
Diagnosis
Comparison of the field selection strings from movement type 543 and G/L account 7449990 has revealed that there is an incompatible field selection combination at one or more points.
Field for which the field selection is different: Vendor goods movement
Example
On the movement type screen, a given field is a mandatory-entry field, whereas on the G/L account screen, the same field is suppressed.
System Response
You cannot post this transaction, unless you have changed the field selection adequately.
Procedure
Contact your system administrator.
Action to be taken by the system administrator
Check whether any postings resulting from this movement type are to be made to the G/L account determined automatically. If you find that the G/L account is not correct, check the automatic account determination in the Customizing system for valuation.
Proceed
If the G/L account is correct, use the report RM07CUFA to compare the field selection for the movement type with the field selection for the G/L account and change the incorrect settings or the field status group of the G/L account.
Proceed

The field is mandatory in acct 7449990 and hidden in movement type 543 or vice versa. To check the field status for that movement type, you can run the program RM07CUFA
Once you execute this program and found that the field is set to mandatory, then it should be mandatory for that movement type field status also.
Alternatively, Go to txn OMJJ, click on Movement Type and execute. There double click on "Field selection (Enjoy) and see whether the movement is maintained as Required Entry or Optional Entry.
Now go to FS00, input the G/L Account 7449990 and execute. There go to tab Create/bank/interest and chech whether you have maintained any value against "Field status group" and also you have checked the box for "Post automatically only".
This should be done in consultation with FI people only if the issue is in production client.
thanks
G. Lakshmipathi

Error while releasing Billing document in Subcontract process

Hi All,
We are working on Subcontract process as explained below:
Company code X purchases the component A and sends it to Company code Y on Subcontract. Company codes X and Y belongs to one company using single operative chart of Accounts, Controlling area & operating concern. FI configuration has been maintained in OBYA by treating above company codes Inter company GLs. The component A is sent to company code Y as non value added item. Through 501 movement type, as the component is sent by Company code X.
Company code Y will add some components (like B,C and charges some expenses as service component D for preparing Finished good) and send this FG to Company code X. For this company code Y will raise a Sales order and followed by MRP run and Production order is created.
In VA02 of above Sales Order, while entering Item details, where the Settlement rule is asking for PA Transfer structure (in Account assignment tab of Item details) and giving the following error analysis:
Enter a PA transfer structure
Message no. KD 044
Diagnosis
A PA transfer structure is required for settlement to profitability analysis.
System Response
You cannot save this settlement rule.
Procedure
Enter a PA transfer structure. To do this, choose the "Parameters" function in the settlement rule. As part of customizing, you can also store a default value for the PA analysis structure, in the settlement profile. The system then uses this default value when you enter a settlement rule.
In addition to above, another issue has raised while releasing the Billing document after doing PGI. Accounting document is not getting generated and while releasing the Billing document (VF02) it is throwing an error as
Enter profitability segment as cost object for Revenue and COGS posting
Message no. ZC 001.
MM,PP,SD & FICO configuration settings maintained:
1. All required OBYC settings
2. All cost element and Cost element categories have been maintained
3. From MM side the system is generating FI & CO documents
4. Settlement profile in Production Order type is maintained (in KOT2). Allocation structure and PA transfer structure were maintained in (OK06, OK07 & KEI1). In PA transfer structure we have assigned the required Sources and Value fields and settlement cost elements.
5. In VKOA condition types KOFI and KOFK were maintained for relevant Customer & Material Account Assignment groups.
6. Required settings have maintained in OKB9.
Movement types 501 (sub contract), Received back to Company code X through Movement type 101. In spite of these settings still we are getting the above mentioned errors.
Could any one help to provide some inputs on the above issue as early as possible.
Thanks in advance.

Hi,
check in the sales order line item procurement tab . u can get the requirement type. in SPRo check the requiremnt class for the requirement type. in that requirement clas u will get settrlemnt profile for the sales order. Check that settlemnt profile there u have to maintain the PA transfer structure.
I think both problem will get solved by maintaing the PA structure..
You are doing sales order costing right....and i hope it is non vsaluated sales order costing .....
If help ful please assign points.
cheers
Prabhat

Account determination error in Subcontract PO-MIGO.?

Hi all
While doing GR, i mgetting error i "Account determination for entry LDCA BSV 0001 ___ 5010 not possible".
The above PO is subcontract PO .
Thanks
sap-m

Hi,
For subcontracting..maintain these keys..so that you will not get any problem..
BSX, BSV, WRX, PRD, FRL
Regards,
Prasath

Error when posting GR agt a subcontracting PO

Dear friends,
When I am going to post a GR agt a subcontracting PO of 1 line item with 2 components, one with +ve and another with -ve quantity, system is giving an error message "Account 415000 requires an assignment to a CO object''. Can u please tell me what may be the possible reason ?

Go to FS00, enter G/L 415000 and click change button.
and at the top u can see Change Cost Element Button
clcik that & in the Defaults pls maintain COst Centre

Cost element error while processing GR of Subcontracting sch.agreement

Hello All,
While processing GR for a Subcontracting Sch. Agreement, the system gives the following error:
Cost element 50050002 is not assigned to a cost component in CostCompStruct M1
Message no. MLCCS010
Diagnosis
You have activated the actual cost component split.
No cost component has been assigned to cost element 50050002 origin group in cost component structure M1 for chart of accounts MMC. The system is unable to assign the value to a cost component.
System Response
You cannot carry out posting.
Procedure
Check whether for this operation the value to be posted is to be assigned to this cost element.
If the value has been assigned to the wrong cost element, you should change the account assignment for this operation.
If the value has been assigned to the right cost element, then maintain an assignment of the cost element and origin group in Customizing of Product Cost Planning.
The Sch.agr contains the parent material and the child part is maintained in the Component overview for that material in Maintaining the sch.line.
What should be looked into.
Please help.
Regards,
Manoj

Hi,
Check on it;-
http://www.sapfans.com/forums/viewtopic.php?f=6&t=300552
Cost element not assignment to Cost component structure when activated M.L
pherasath

Error while creating Subcontracting PO

Hi experts,
While preparing PO with item category "L".error meassage is displayed - " The MRP parameters are not maintained in plant "
I want to know which MRP parameters are to be maintained for Plant to create a Subcontracting PO and how to maintain these parameters?
please help me out.
Regards,
jai

Kishore , thanks for reply.
as per your suggestion i just created plant in
SPRO-> IMG-> Materials Management-> Consumption-Based Planning-> Plant Parameters-> Carry Out Overall Maintenance of Plant Parameters.
Is creation of plant is sufficient for subcontracting procurement?
I created a subcontracting PO in this plant.
Is it necessary to have MRP views to be maintained in material master , for subcontracting procurement cycle?
I will be obliged if you answer my queries
regards

Getting Error while doing Subcontract PO-MIGO

Dear All,
While doing subcontract gr i am getting error
Deficit of Stock w. vendor unr. 2.336 KG : FR-BAJRA-4903-1.5 1002 O
my PO quantity is 5,200 EA
for the PO i have send to vendor with component material qty is 121.486 KG
Ratio is 1 KG=22 EA
Now vendor sending for 1 KG is 25 EA ...when i am taking GR for rest 100 EA system thronging error
Please suggest me how take GR with tolerance...

Hi,
Your PO qty is 5200 EA . For this to happen the component to be 1 KG for 22 EA of the sub con main material . Is this correct ?
If so 236 .36 KG - 5200 EA means , 5200 EA needed to be created by vendor , it requires 236.36 KG of the component ,
Did you in fact sent the component for the 236.36 KG to vendor ? to get the 5200 EA ?
But as per you post for the PO qty 5200 EA youi sent 121.486 KG . then 1 EA = 2.336 KG .Please check the previous GR document for the component how much it is consumed . It has to be 119.149 approx . If in that document the consumption is more , defintly system will ask for more qty and give deficit .
Please check the components sent to the vendor and the consumption . probably this flow is missed for the deicit .
Regards,

Error While creating Subcontracting challan in J1IF01

Hi,
While creating Subcontracting challan in J1IF01Im getting error " Deficit of 3.2000000000000002E+00 in RG23ABED".
Any suggestion in this regard is very helpful.
durga
[email protected]

Hi,
You are referring the material challan, which is not posted for Sub-Contracting PO. Pl. check your Material document number. Also pl. check that plant is same in material document & s/c Challan.
Excise values are not appearing in the S/C Excise Challan, because you are sending the excisable material to your sub-contractor without paying any excise duty. When you reverse & recredit the S/C Challan, it will show the Excise Amounts.
Regards,
Prashant Kolhatkar

Subcontracting error

Similar Messages

Maybe you are looking for