Subcontractor and supplier material

i want to know where is the particular material allocate to which vendor
for example there are two more vendors ,we provide contract to any of one  vendors
i want to know curently which vendor has that material
ifor raw material which  supplier has the order for particular material

Hi Suresh,
MBLB is standard report and you can enter either of Vendor, material, plant or company code in selction parameters of this report which will give you the desired output.
The Table which stores data of Stocks at Subcontractor is  : MSLB

Similar Messages

  • Need training material / test scripts for MRP and Supply Chain module. Can anyone hel

    Can anyone out there provide me with sample test scripts they may have used for upgrading to Oracle Financials 11i? Need sample scripts for MRP and Supply Chain management. Looking for good test scenarios for testing these modules. Appreciate any help. Email at [email protected]

    Can anyone out there provide me with sample test scripts they may have used for upgrading to Oracle 11i? Need sample scripts for MRP and Supply Chain management. Looking for good test scenarios for testing these modules. Appreciate any help. Email at [email protected]

  • Plant A supplying material to plant B, plant B supplying it for subcontract

    All SAP Gurus,
    Here are two plants: A and B
    Plant A is EOU (Export Oriented unit)
    Plant B: Domestic Plant
    Plant A is providing material to Plant B,  57 F 4 challan is created.
    Plant B simplying passing on this material to subcontractor, and creating one more subcontracting challen.
    Subcontractor supplying material to plant B.
    Plant B supplying the material back to plant A.
    How this scenario can be mapped.
    Please help.
    Regards

    Please do not create a challan from Plant A to B, Instead create a STO & if necessary an EI while transferring the material from A to B. A subcontracting challan can be created when the material is sent from B to the Vendor because reconciliation can take place here.
    Then another EI can be created when the material is eventually sent from B to A again via stock transfer.

  • Blocked Stock and Frlag material for Deletion

    What is the diffrence between blocked stock and flagging material for deletion.
    Thank you

    Hi,
    Difference between Block stock and flag material for deletion is:
    Block stock will only come into picture if your client says that when ever they receive stock, before quality and physical check it should not create any accounting document..So what you will do is, you will receive stock as block stock with mvt 103...Once Check is done you will release your block stock with 104....
    Say for an e.g. Vendor has supplied you goods in your premises...Same time you have noticed that goods are damaged o rare of  poor quality...So you will post the stock as block stock...So once you post as a block stock, there won't be any accounting documents generated....
    Material flad for deletion means: That particluar material can not be used for further procurement..E.g..  may be client has stopped using that material....
    Hope it clears
    Utsav

  • Supplier and Supplier Part Number in standard report BBP_BW_SC3

    Hi All,
    There is requirement like to add new fileds ,Supplier and Supplier Part Number in standard report BBP_BW_SC3(copy to z version).
    From which table i can get these values in SRM system.
    Please suggest.
    Thanks & regards,
    Rakesh

    Hi Walter
    Thank you so much for your reply, which indeed helped us to a great extent.
    The solution works fine for my original example of A & B material. However, we want to find every combination of lower level material used in each rolled up material. In above example, if material B is used in C, and C used in D and D used in final product E.
    The suggested functional module explodes the header material as per itu2019s BoM, and follows Top-down approach, whereas we are looking forward to find a link which shows Bottom-Up approach i.e. where-used approach. In above example, we want to start from lowest level material A, then B, and C till final product E.
    Since the output of functional module has various fields so we are trying to find a field which helps up to establish the bottom-up approach for multilevel BoM materials.
    Any inputs will be highly appreciated.
    Thanks,
    Nirav

  • ERROR: Vendor can supply material only until 31.12.2006

    I´m getting this error: "Vendor can supply material only until 31.12.2006" while using ME38 txn and adding manually a schedule line.
    I review the Sched Agreement and
    1.- No Cancel
    2.- No Delivery Completed
    3.- It is Valid until 2009
    Also Check the Source list.-
    1.- Valid until 2016
    And Also check the Quality Info Record and
    1.- Valid until 2016.
    What else could be generating this problem?

    Check in ME13 transaction on general data screen that any available To date is entered here.
    This is regular mateiral indo record

  • EQ & eQ Import:  Where is Supplier Material ID stored on Import?

    In Material eQ there is a data field for Supplier (Material) ID.  We are not seeing this value imported to the Spec Object.  The only place we see a similar reference label is on the SRSA but it does not import there either. This supplier entered value is stored in eQMaterialQuestionnaire.supplieringnumber
    Where does this data element flow to so we can utilize it in the UI?
    Thank you.  --BeckieC

    You are right that this field maps to the supplier material ID on the sourcing approval, unfortunately this has to be manually copied to the sourcing approval along with any sourcing approval specific docs and/or custom data.  
    We hope to offer the ability to push data to the sourcing approval from eQ in a future release.  If you are interested in this feature go ahead and submit an enhancement request so we can make sure your use cases are covered.
    Thanks,
    Kelly

  • DIRECT MATERIAL PROCUREMENT and INDIRECT MATERIAL PROCUREMENT

    please explain , what is the differance between DIRECT MATERIAL PROCUREMENT and INDIRECT MATERIAL PROCUREMENT.please explain with example.

    source: http://www.ftpress.com/articles/article.aspx?p=24168
    Procurement materials can be broken down into two major categories: indirect and direct.
    u2022
    Indirect procurement involves any commodity or service that a company buys that does not result directly in finished goods.
    u2022
    Indirect procurement can be divided into two groups: ORM (Operations Resource Management) materials such as office products and travel services, and MRO (Maintenance, Repair and Operations) materials such as replacement parts.
    u2022
    Direct procurement involves materials purchased for use in the manufacturing or distribution supply chain that are "directly" related to the production of finished goods.

  • Production supply area (PSA) and supply area

    Hi,
    Is there any difference between supply area and Production supply area. it woul be good if you could explain me the difference.
    Thanks,
    Maxx

    Both are same
    Production Supply Area is the link between Warehosue Management and Production function.
    Production supply areas (PSAs) are used for material replenishment and are situated directly on the shop floor in the production department. The supply area groups work centers near production storage bins based on the material staging methods. You need to enter the PSA in the work center master data.
    http://help.sap.com/saphelp_46c/helpdata/en/c6/f8412f4afa11d182b90000e829fbfe/frameset.htm
    Hope this helps.
    An area on the shop floor where material is provided that can be directly used for production.
    The supply area is used, for example, in KANBAN production control and for material staging using Warehouse Management (WM).
    Proposed Supply Area in Material Master Record                                                                               
    The supply area is used as an interim storage area on the shop floor    
         which is used to provide materials directly at the production line.                                                                               
    The proposed supply area is mainly used for KANBAN materials that are   
         only or usually provided at one supply area in a plant. Here, this supply
         area can be easily saved in the system.                                                                               
    The proposed supply area is used, for example, to determine the supply  
         area for the dependent requirements of a material.                      
         The supply area in the dependent requirements of a material is required:
         o  to enable the system to calculate the KANBAN control cycles          
            automatically                                                        
         o  to enable you to select requirements in the pull list with reference 
            to a supply area

  • What is difference between BP monitor and supplier monitor?

    hi friends
    what is difference between BP monitor and Supplier Monitor
    what is tcode for BPmonitor
    Regards
    Vinny

    Hi Vinny,
    Please refer to the following links. These seems useful:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f051efda-bc58-2910-3785-e60d1f798c96
    The specified item was not found.
    New Business Process Monitoring functionalities in SAP Solution Manager – ALE / IDoc Monitoring
    Regards,
    Saumya

  • Material and representative material in PCA

    Hello all,
    I have an issue concerning material numbers in Profit Center Accounting. My aim is to be able to report on material group (attribute on 0MATERIAL) in BW for both plan and actuals.
    In R/3 PCA they plan on field "representative material". Furthermore they post actuals on "material" field.
    Extractor 0EC_PCA_1 brings all postings (plan + actuals) to BW, but does not include the "material" field. It only includes the "representative material" field, so I'm missing the possiblity to see the actuals per material number.
    Extractor 0EC_PCA_3 brings all actual postings to BW and includes the "material number". However the representative field is not filled (since this is only actuals)
    So I get what I need into BW, but in two different extractors (and also on two different aggregation levels).
    I somehow need to merge the information of these two extractors. Is it a multi cube I should use here? Or should I rather try to modify 0EC_PCA_1 by adding the material number in an append structure? I actually tried this, but I still couldn't find the new field in the extractor. So I guess this is not possible here and that I have to go for the multi cube solution?
    I need to get both the "representative material" and the "material" into info object "0MATERIAL" since the material group is an attribute of that. Could this work if I modify the update rules in cube 0PCA_C01 (this is filled with records from 0EC_PCA_1) so that repr. material points at 0MATERIAL (for plan values) and at the same time use cube 0PCA_C03 (this is filled with records from 0EC_PCA_3) which uses 0MATERIAL as standard (for the actuals).
    I'd be extremely thankful for some ideas/help...
    Thanks in advance!
    best regards,
    Fredrik

    Hi Fredrik,
    Some questions:
    Is there a 1 on 1 relation between repr. mat. and material?
    Do you have PCA_1 as Totals or Line Items?
    If you want to report on material group you somewhere have to have a relation between repr. material and mat. group.
    Of course you can always map the rep. into 0MATERIAL, but you MD has to be correct too.
    And: Adding in PCA extractors is difficult!

  • Report to find a material by a mfr part number and old material number

    Hi,
    Is there any standard report to find a material by a mfr part number and old material number ?
    For the moment, we are using MM03 to search articles by these selection criterion.
    Thanks,
    Julien Girard

    Hi
    As there is no stsndard report use the SQVI to find out the details, It is very simple , please follwo the below steps.
    Use Txn SQVI, enter the Quick view field say- ZMNFR and click the  create button, Enter the title in the next screen i.e Report name- Say - Manufacturer's Part No. Details, in the same screen you need to enter  MARA  for the data from table/database view, please leave the 1. data source as Table only and the radio button as Basis mode only.  Click the tick mark , you will go to the next screen,
    You will notice Quick viewer Intial screen
    Open the node general material data
    Select the Buttons besides the fields MARA-MATNR for material number, MARA-MFRPN for manufacturers part number, and MARA-BISMT for old material number. You can include any other field if you wish to have in your output. You will notice two check boxes against each field, one is for input screen field and the other is for outputf field. But currently you do not bother about and select both the check boxes or any other field you wish to have as input and output as well. Once selected all the fields afer clicking the check boxes save the total arrangement. and then in the same screen use the execute button or use F8 to find out your report input screen.
    Now enter the Material number for which you wish to know other two details in the report and execute again you will find the report output.
    Please ensure that you are maintaining both the details in material master basic data1 and purchasing  view if you wish to get  out output
    Best regards
    SAM
    Edited by: samuel mendis on Apr 8, 2009 6:52 AM

  • How to update Supplier and Supplier Sites through interface tables

    Hi All,
    Working on EBS Version 11.5.10.2
    I have a requirement to update flags in Supplier and Supplier Sites.
    Interface Tables : ap_suppliers_int
    ap_supplier_sites_in
    1. ap_suppliers_int :
    Field name : hold_unmatched_invoices_flag
    2. ap_supplier_sites_in :
    Field name : hold_unmatched_invoices_flag
    The Flags to update in base tables
    1.base table name : po_vendors
    Field to Update : hold_unmatched_invoices_flag
    2. base table name : po_vendor_sites_all
    Field to Update : hold_unmatched_invoices_flag
    Please let me know is there any API for updates.
    Thanks and Regards

    Please see these links.
    https://forums.oracle.com/forums/search.jspa?threadID=&q=ap_supplier_sites_in+AND+API&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    https://forums.oracle.com/forums/search.jspa?threadID=&q=po_vendors+AND+API&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    https://forums.oracle.com/forums/search.jspa?threadID=&q=po_vendor_sites_all+AND+API&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    https://forums.oracle.com/forums/search.jspa?threadID=&q=hold_unmatched_invoices_flag+AND+API&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    Thanks,
    Hussein

  • Link between Delivery schedule line counter from PO and the material docume

    Dear Gurus,
    I have one PO with single line item having delivery schedule -
    Material 1 -
    delivery schedule 01.01.2009     2000
                                                         01.03.2009    5000
    I have received quantity against this Po
    I want to know where I can find the link between Delivery schedule line counter from PO and the material document
    Best regards
    Sar

    There is no link from the MAterial document line item (Table Mseg) to the PO Schedule Line (EKET).
    If this is for Evaluating an on time delivery or GR, you may consider the following approach.
    PO details Po Date  QTY
    Sch1   01Jun2009   200   
    SCH2  08Jun2009   100
    GR Details
    GR1   01Jun2009   180
    GR2   07Jun2009   110
    GR3  09Jun2009      10
    Calculate a *** total qty for the PO Line.
    PO details Po Date  CUMUL QTY
    Sch1   01Jun2009   200   
    SCH2  08Jun2009   300
    Calculate a *** total qty for the ontime GR.
    PO details Po Date  CUMUL PO QTY  CUMUL GR on time
    Sch1   01Jun2009   200                180
    SCH2  08Jun2009   300                 290 (180+110)  the 3rd GR was too late
    Evaluate the PO SChedule Lines as follows:
    Po SCL qty + CUMUL GR QTY - CUMUL PO QTY = ADJ GR ON Time Qty
    SCH1 01Jun2009
    200 + 180 - 200 = 180 on time for 01Jun2009 date ( 90% fill rate)
    SCH2 08Jun2009
    100 + 290 - 300 = 90 on time for 08Jun2009 date (90 % fill rate) the first 20 of the GR on 07Jun2009 went to fill the late, early date.
    Best of luck !
    SCH2 100 +290 - 300 = 90 on time for 07Jun2009 date

  • Issue in generating Invoice with standard and service material

    There is one scenario where along with standard material (i.e Tube bending machine) they charge the customer for the Design and Development of a machine (which is a service). Is it possible to make a standard order with the standard material(with excise and cst/vat) and service material (with service tax only) in one single order?
    I have tried with both the material in a single order but while making invoice system is taking only the standard material as in  item category we have mentioned Billing relevance from delivery document. And service material will not have the delivery.
    I would be thankful if you could spare some time and check the exact problem.

    Hello,
    Yes.. this is a common problem when you use Delivery relevent material and service material in the same order. Why don't you use the service material in differnt order and invoice it? or do you have any restriction like the delivery relevent material and the service material should be billed in one invoice?
    Prase

Maybe you are looking for