Subversion configure with external Merge Tool?

I'm using Subversion as my VCS in JDev. I'd like to use Altova's DiffDogg as my Merge Tool in JDev. Is this possible in JDev 10.1.3.1?

The subversion extension to JDeveloper has its own visual merge tool
See demo here:
https://collabnet.webex.com/collabnet/onstage/tool/record/viewrecording1.php?EventID=245412205
There is no built-in pluggability to this function to replace it - but you can probably just invoke the tool using the tools->external tools to add an option to invoke the command line interface.

Similar Messages

  • Does Oracle iStore 11i support integration with any analytics tool ?

    Hi
    We are planning to implement analytics with Oracle iStore 11i . However it seems like there is an integration possible with Oracle web analytics in R12. and there seems no such facility in 11i. Or is there one?
    Also is there there any means available in Oracle iStore 11i to integrate with external Analytics tools like Google Analytics.
    Thanks in Advance.
    Regards
    Srinivas

    Hello Srinivas,
    iStore introduces integration with Web Analytics in Release 12. There is no integration in Release 11i.
    We have no documented way for integration with the Google Analytics.
    Note that iStore allows users the flexibility to modify the jsp's to meet your business needs. Therefore, you could modifiy to enable tracking by Google Analytics.
    We do not have any seeded integration.
    Please advise on any additional questions.
    Thank you,
    Deborah Bourgeois, Oracle Customer Support

  • Configuration problem with external Western Digital My Book 2 TB drive

    How do I fix a configuration problem with my external Western Digital My Book 2 TB drive which used to both read and write. Something has happened so that the drive is now read only? There is 600 GB of data on the drive that I cannot lose, thus am very concerned about messing around with formatting the drive which is raid 1 and filled with data.

    may not like to hear, but I'd skip on MyBook cases, nice looking as they are.
    Get a 2nd drive case to recover to.
    http://www.macsales.com/firewire
    may need to play with the demo Data Rescue 3 from Prosoft
    Backup/recover before repair is usually in order
    never have one backup set. THREE sets of your data, minimum.
    3rd party disk maintenance and repair should be a must and given rather than rely solely on Apple Disk Utility.
    Data and system maintenance and recovery plan - should be like practice for sports, arts, military with practice and making sure you will know how and the tools you need - ahead of time
    Resetting USB/FW ports, try another if one won't work. When 10.6 came out there was a lot of grinding teeth with external drives not working or mounting.

  • Using New LabVIEW Merge Tool LVMerge With Tortoise SVN

    Hi,
    I've just posted a new blog article Using New LabVIEW Merge Tool LVMerge With Tortoise SVN to my blog at ExpressionFlow. Check it out!
    Tomi
    Tomi Maila

    The LV merge tool really does become far more powerful when integrated into SVN than when used manually.  Here's an article on Using LVmerge LabVIEW Merge Tool with TortoiseSVN with all the necessary setup instructions for LabView 8.5 and 8.6.
    Jesse

  • Is it possible to use variant configuration (with a Non-SAP solution) when creating ERP sales orders in SAP CRM WebUI

    Hello,
    our customer plans to use a Non-SAP solution for variant configuration (Camos) in SAP ERP (ECC 6.0) and in SAP CRM 7.0 EHP1 as well.
    ERP sales orders (and ERP quotations) should be created in SAP CRM (CRM WebUI).
    Is it possible to use variant configuration (with an external variant configuration tool) when creating ERP sales orders and quotations in the SAP CRM WebUI or do we have to implement SAP IPC for this?
    Thanks in advance.
    Regards,
    AEV

    Dear AEV,
    I think LORD (lean orders) should work with variant configuration as well. In the note 1236015 there is not restriction listed. However you need lord2 activated in ECC, and ECC system should be on EHP4.
    Best regards
    Rene

  • Configuring an external Monitor for Color Correction?

    I currently have my Mac Book Pro 17in connected by the mini DV port and one USB port to a Mac 30" Cinema Display for editing on FCP7. I use it in a two monitor configuration with my Bin on the laptop screen and the FCP interface on the Cinema display. This works well for me.
    I also have an external ESata drive via PCI slot. I would like to connect an external video monitor as well for quality checks and Color correction purposes. I am also looking for advice on what sort of external video monitor I should get and how would I connect it to the laptop or via some external third party device. I would be hoping to use a video monitor connected via a hdmi connection. Most of the work I do is supplied on drives, original material EX3 or Canon and some on HDV (Camera) that I ingest via Firewire800. Many thanks in advance.

    Sorry Mark, you can't always have everything ... with the Matrox MXO2 (or similar, like Motu HDX-SDI) you wouldn't be able to use your eSATA drive at the same time as the I/O device as they both use the ExpressCard/34 port ... you would have to use a FW800 drive for your media instead. On the plus side the MXO2 includes a calibration tool which can help you calibrate your LCD/LED screen via HDMI for accurate color reproduction.
    An alternative device would be the AJA IoHD (or perhaps Motu V4HD) which connects via FW800. It's a superb piece of kit but is costly and doesn't offer any calibration utility ... that said, a good quality plasma display, such as a Panasonic Pro Plasma, can be found relatively cheaply and many of these have built in picture controls suitable for getting an accurate calibration.
    The future is much brighter for Mac laptop users with the introduction of the Thunderbolt connector on the latest MBP revisions. As with FireWire and ExpressCard, you can expect to see I/O devices, hard drives and monitors etc that will connect directly via that connection, greatly expanding the capabilities of a simple laptop setup.

  • Can't use voice/video functionality with external domain connected users through federation

    Hello All,
    Hope you keeping well..!!
    We are communicating with external customers lync server through federation option setup on our corporate lync server.  We have received the federation setting from the customer with SIP address which has been setup on our corporate lync servers after
    that we were able to browse the customer contact through corporate lync account.
    We were also able to chat with external customer but however voice/video functionality are not working through same session.  Whenever we try to dial out external customer lync account it ended with error message "call ended due to network issue".
    We have checked the setting from corporate lync servers and network point of view but doesn't find any issue which cause the disconnection to voice/video over lync.  Could you pl help or guide with the way to resolve the issue.
    Thanks, MK

    Thanks for your reply.<o:p></o:p>
    Audio/Video works fine within corporate when dial any lync contact.  We only have issue while trying to use the same functionality with any other
    external lync contact configured over federation option.<o:p></o:p>
    We already checked the security rules and all required ports are open, as confirmed by local resolver group.<o:p></o:p>
    We have checked with external parties and according to them their systems are hosted by Microsoft as part of office 365 suite and they already have
    federation option for 17 different customers which works fine.  Which means issue must be your local end.<o:p></o:p>
    Is there any tool available to identify the issue from client end?<o:p></o:p>
    Also I have a question here....In my corporate environment...client is sitting in India and lync servers are hosted in UK and users connect to it
    over MPLS route.  In Client lync configuration we have  internal/external servers configured .....so when i tried to make a voice call with external lync users then I see from netstat -a command that traffic hitting to multiple public IP addresses
    directly from my machine..<o:p></o:p>
    Does it mean that client required internet connectivity with specific open media ports to connect with external parties for video/voice? or in ideal
    case all request should handle by corporate internal server which should took UK internet path to connect with external lync contact?
    Thanks, MK

  • WCS integration with other NMS Tool

    Hello friends...We are going to upgrade our existing WCS v5.1.65.4 to v6.0.170.0 and after that planning to integrate it with a 3rd part NMS tool.for any critical alerts\traps. So if any critical event related to WLC\AP received in WCS, it will send those alerts to NMS and based on the severity of alerts, The NMS will open a remedy ticket in BMC remedy tool. 
    Can any one provide the document or configuration steps for WCS to make it as as trap sender for NMS

    Really? I configured it with external NMS without problems. Did you heard about Notification  Receiver in WCS configuration. All traps received from WLC are forwarded to external systems.
    Notification  Receiver
    Server IP Address
    Notification Type
    SNMP
    SNMP Parameters
    Port Number
    Community
    I suggest to read the manuals http://www.cisco.com/en/US/docs/wireless/wcs/6.0/configuration/guide/6_0admin.html#wp1131316
    http://www.cisco.com/en/US/docs/wireless/wcs/6.0/configuration/guide/6_0event.html

  • External Java Tools

    I know that you can make external tools available from JDeveloper by adding them with the external tools wizard. If the external tool is written in java, you can set that up as an execution of java.exe with the proper classpath and other command line options.
    Considering that JDeveloper is itself written in jave and running in a JVM, is there a way to configure an external tool to just run under the current instance of the JVM?
    To be more specific, I would like to set up Axis in JDeveloper, and would like to use the WSDL2Java tool to generate java files in the current project. Maybe this would be better done as a JDeveloper extension, but I am too inexperienced as a java programmer to want to try to upe the Extension SDK.

    Funny you should ask about building clients to web services, for that is exactly how I came to want to use Axis. I am building a client to the Microsoft MapPoint Web Service, and started by feeding its WSDL to JDeveloper 9.0.2.5's stub building wizard, and later to JDeveloper 10.1.3 preview edition's JAX-RPC stub building wizard.
    The problem is that this web service requires http DIGEST authentication. I know that this is non-standard, but hey, it is Microsoft, they can do what they want. None of the web service client code generated by various JDeveloper versions can do DIGEST authentication; they only do BASIC authentication.
    Microsoft's example of how to use the MapPoint Web Service from Java uses AXIS. AXIS can't do DIGEST authentication either, but at least AXIS gives you a place to replace the default classes that make the http connection and transmit and receive the SOAP data. Microsoft's example gives code for such a replacement class that can do the DIGEST authentication and tells you how to configure AXIS to use it.

  • Creating a link with the Link Tool

    I used the Link Tool to create a Link in my pdf file.  The link is set to open a website file.  I created 2, one with just a little text and the other was a picture that was 200 X 300 px.  When I follow the links, each is opening a full web page.  I expected that with the Text link because I put the text on an html page but the picture I sized to the 200X300 but that opened a full web page also.  When setting up the link to the Web File I did not see an additional settings as far as how to open the web page such as _parent or _child etc.  I believe it is normally the Target.
    Does anyone know how I would either do this with the link tool or know of a better way to do it overall?
    Thanks
    Bob

    Hi,
    You may be confusing HTML markup for links with PDF links.
    In PDF, HTML markup is not applicable.
    So "target_xxxx" or any other HTML 'stuff' cannot be used.
    For the graphic file (JPG, PNG, whatever), make a web page file that is configured to display the graphic file in a manner you desire.
    The web link you set in the PDF, with Acrobat, will result in this web page file opening.
    This is the file that will control how the graphic is rendered.
    If needed, a resource for HTML "how to" is W3 Schools.
    Be well...

  • Federation Service with External Organization is not working

    Hi,
    Exchange 2010 is running in present environment and recently I have introduced Exchange 2013. There is federation Enabled at Exchange 2010 end with External Exchange organization. When we migrated users from E2k10 to E2k13 Free /Busy sync has stopped working.
    Exchange 2k10 & E2k13 in same Exchange organization and no errors found in configuration part and all seems Success.
    Here what I am suspecting, something that I need to do at F5 load balancer end, not sure what :( .. I need urgent help from Experts in this forum to help me in case I have missed something to make Federation working. 
    Amit

    Hi.
    Federation in coexistence mode runs through the Exchange 2013.
    Coexistence with Exchange 2010
    In organizations that contain both Exchange 2010 and Exchange 2013 servers, users who have a mailbox on an Exchange 2010 Mailbox server can use organization relationships to share free/busy information with recipients in external Exchange 2013 federated
    domain organizations. The Exchange 2010 Client Access and Mailbox servers must be running SP2 or higher, and you must have at least one Exchange 2013 Client Access server in the Exchange 2010 organization.
    Troubleshooting plan
    1) Check run correctly Exchange CAS 2010/2013
    2) Enabled Outlook logging and checked the logs. For Client from Exchange 2010 and Exchange 2013 mailbox.
    3) Ran Test-OrganizationRelationship on Exchange 2010 and Exchange 2013.
    4) Checked the Federation settings on Exchange 2013.
    5) On Exchange 2013 and 2010 server: Get-FederationTrust | Set-FederationTrust -RefreshMetadata
    MCITP, MCSE. Regards, Oleg

  • Problems in accessing UWL Items - Using SAP r/3 4.7 with External ITS

    Hi,
    When i am trying to open the Tasks in UWL, the Tasks which are calling any Tcode are giving blank page and some Tasks are opening but the Attachments in that Tasks are not opening.
    Tasks and Attachments are pointing to:
    1) http://vq2wk.corio.com:81/scripts/wgate/webgui/!?%7Etransaction=*SWK3+P_INSTID%3D0030000063%3BP_TYPEID%3DZSDQUOTE%3BP_CATID%3DBO%3BDYNP_OKCODE%3DONLI%3B&%7Eokcode=ONLI&%7Eclient=120&%7Elanguage=en&%7Eaccessibility=0
    2) http://vq2wk.corio.com:81/scripts/wgate/webgui/!?%7Etransaction=*SWK1+p_nosecm%3DX%3Bwi_id%3D000000156456%3B&%7Eclient=120&%7Elanguage=en&%7Eaccessibility=0
    All the Connections (RFC, SSO, SLD) and WebGui Tcodes with External ITS are working fine.
    Could any one please suggest me that i am missing any more configuration or any authorizations. Else any Session Managment needs to be done.
    Some times it is showing "/!Session not fall-safe/!\" in the status bar.
    Thanks in Advance.
    Regards,
    Sridhar.

    I already checked in SMLT tcode ,My system is MDMP .I passed that error and now I am getting this
    DbSl Trace: ORA-1403 when accessing table SAPUSER
    (DB) INFO: connected to DB
    (DB) INFO: DbSlControl(DBSL_CMD_NLS_CHARACTERSET_GET): WE8DEC
    (GSI) INFO: dbname   = "D3320110118070143                                                                                "
    (GSI) INFO: vname    = "ORACLE                          "
    (GSI) INFO: hostname = "SAPTST2K3E32                                                    "
    (GSI) INFO: sysname  = "Windows NT"
    (GSI) INFO: nodename = "SAPTST2K3E32"
    (GSI) INFO: release  = "5.2"
    (GSI) INFO: version  = "3790 Service Pack 2"
    (GSI) INFO: machine  = "2x Intel 80686 (Mod 29 Step 1)"
    (VK) ERROR: invalid migration key
    E:\usr\sap\D33\SYS\exe\run/R3load.exe: job finished with 1 error(s)
    E:\usr\sap\D33\SYS\exe\run/R3load.exe: END OF LOG: 20110118215221
    any idea on this??

  • Error while deploying project with external variables

    Hi,
    We are facing issue to deploy a project which contains external variables. In the process of publishing, we check true - Smart Publish. In the deployment process I get a screen where we define the Deployment Topology. On clicking Deploy button, the next screen we get an error which says:
    Error(s) found while creating external variables for the following engines: <Engine_Name>: Login failed for the user '<DB User>'.
    The DB User and the databases are created by the ALBPM Configuration wizard while configuring. We are able to login to SQL using the same userId and also can access the tables in the database. Also, we use the same DB userId for the Engine Databse too.
    We are using ALBPM Enterrpise 5.7 MP3
    WebLogic 9.2
    SQL Server 2005
    If anyone has resolved such issue earlier, we need your urgent help.
    Please suggest
    Thanks and Regards
    Jayant

    Hi,
    When you initially ran the wizard to create the Engine tables you used a user and password that had been granted CREATE table authority for Sql Server.
    When you publish and deploy a project with External Variables (project variables in 6.0), you are adding columns to one of the Engine's tables. When you get the error you're getting, this normally means that the database user you specified has not been granted ALTER privileges for the database tables.
    This should be pretty easy for your DBA to check out and fix. Once they do the GRANT, do the publish and deploy once again.
    Hope this helps,
    Dan

  • Bapi_salesorder_createfromdat2 with external ordernumber

    Hi,
    I'm using the BAPI_SALESORDER_CREATEFROMDAT2 function already sucessfull, but now I have an external System (eShop) which will be the leading system for the sales order number.
    Up to now, I created the order and received the SAP sales order number via MESSAGE_V2. Is it also possible to hand over a given sales order number to SAP (SAP will be configured to a new DOC_TYPE) as the "leading" order number?
    I could not find any reference for this issue.
    Any help would be appreciated.
    Michael

    no this is not possible. SAP manages his own numbering regarding the customizing. The only thing you can do is to insert in the SAP salesorder from SAP, the sales order from your other system. This has to be send to the bapi in field 'purch_no_c' from the order_header_in structure
    @Fred - That's not true.  SD document types are configured with both an internal and an external number range assignment.  You can use either range depending on the requirement based on whether or not the number is filled...

  • Mac air with external hard drive - not being found on Finder, Time Machine, Migration Assistant

    I have been using an external drive (Imation Apollo) to access only, old files from previous computer (PC) on a new Mac Air.  I had not transferred them across to new computer (didn't want to do that)  just accessing them from the HD.  It had been working fine until recently.  Each time the external drive had been connected Time Machine would come up and ask if i wanted to use this drive for back ups, and I always chose 'Decide later'.  So, as yetI hadn't as yet configured Time Machine to do back ups.
    Recently I noticed that the extrnal HD was no longer showing up on Finder.  Slight panic as i have 5 or 6 yrs of work saved on that HD
    Further investigations - it's also not showing up either on on Disk Utility, or on Migration Assistant.
    I've done the following: 
    Tried HD in each of different USB ports  - made no difference, HD still not showing up
    Tested different Hubs in each port with HD attached - no difference HD not showing up
    Tried USB flash drives in the USB ports - These are working fine and show up on finder
    Tried the HD on other comptuters (a PC though, don't have access to another mac to do this test)- working fine, the HD is showing up and is accessable
    Interrogated the Console logs to try to see if the act of attaching the HD creates a log entry - couldn't find anything
    Rebooted computer via shut down, power disconnect - no difference
    Reset PRAM - no difference still not showing up
    Reset SMC - no differnce still not showing up
    So I think I have established that all the USB ports are functioning correctly and able to access other external drive devices, using hubs with external powersource is not the issue, identified that the external hard drive is working OK, and it appears that the Mac itself is functioning normally.
    What would be the reason the Mac now does not allow this specific external HD to be identified and accessed.  The only possible things I can think of are
    if I had in fact pressed 'Do not use' when Time Machine asked 'do you want to use this drive for back ups'.  Would that mean that the Mac now totally rejects this HD from being a source of accessible files - I hope not!
    I also think that my husband may have disconnected the hard drive from my computer to access some stuff and he just yanked it out rather than use the safe eject method.  Could this create an issue?  The Hard drive works fine on his PC.
    Why is my Mac Air now rejecting this HD and what can I do to access my historical files now. 
    Any assistance anyone can provide would be very greatly appreciated!
    Thanks
    Anna

    I can't answer why it isn't accessing it, but I have a slightly related issue w my back up drive starting to get noisy.
    Realizing that redundancy is safety for critical data.  I talked to my brother about my situation the other day & he said he has 3 small Western Digital portable HDs that he rotates for backup. He even keeps 1 in the safe deposit box.
    I have read for some time that we should have multiple back ups & also have our critical stuff backed up off site. Amazon HD reviews had a woman telling about how she was very backed up on multiple computers & hard drives, but they were robbed or burgeled & all of them were stolen including her thesis that was on the computers.
    Hard drives aren't that expensive. I just bought a new Western Digital 1 TB drive for $89.99. I plan to use it to back up the Seagate that is getting noisy & then maybe alternate them.
    Also, when I came back to Mac, I moved practially all of my documents to Mac. I think I just dragged & dropped or something. Photos, Office, & pdfs do fine that way. & then you could back them up to a couple of different external drives & remove from your MacBookAir.
    Unfortunately I think most of us do not back up until crisis & then it may be too late.
    Also use Time Machine. For the 1st time in my computer life, my computer is well backed up--although now realizing the need for redundancy so will start backing up to at least 2 different HDs alternatly.
    So, not sure why it isn't working & hopefully you have come up w a solution by now.
    I think what I would do in a situation like this, since you can access it on the Windows machine would be to transfer the data to the Windows machine & then transfer it back to a different back up.
    I'm looking into backing up what I still have in Windows using a thumb flash drive. I think it should all fit ok now that they have the larger drives & I don't have very much left in Windows format.

Maybe you are looking for