Suddenly all display and icons changed color

I turned on my MacBook Pro this morning and the display color turned to an egg-yolk yellow. How do I get it back to the way it originally was. I did not install anything new or change any defaults since I purchase it in May of this year. Did something break or what?? Everything is gray or black now. I need major help!!!

You can go into System Preferences, Display, Color, and see if any of the profiles bring it back. If not, I suspect the video card might have issues.

Similar Messages

Q10 - I tap the screen to select, the icon changes color (indicating selection) but nothing happens...

I notice an issue that predominantly happens when I use my thumbs to tap but does happen with fingers from time to time.
When I select an icon (say, for instance the lower-right corner icon to jump into camera settings), the icon changes color slightly when my thumb touches the glass, and then when I remove my thumb, nothing happens.
Sometimes this happens more than 5 times in a row. It's one thing if the screen never recognized my finger/thumb in the first place. It is a bit more madening when I KNOW that there was recognition (icon changing color) and yet nothing happens..
Anyone else having this problem? Is there some way to recalibrate the screen?
Right after I posted this message I tried that camera setting button - 7 tries before anything happened with my right thumb, one try with right index finger, then again it took 5 tries with index finger. The frustrating thing is that the icon to load the camera in the first place (lower right corner)... that one almost always works with the first tap...

Perform a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430

May have down loaded a trojan or virus while down loading torrents. My menu and windows change color and pattern now. Anyone have this happen before? I repaired the permissions and everything was fixed except one.

My dumb *** may have down loaded a trojan or virus while down loading torrents. My menu and windows change color and pattern now. Anyone have this happen before? I repaired the permissions and everything was fixed except one.
Warning: SUID file “System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent” has been modified and will not be repaired.

You didn't do anything wrong.
Not malware or a virus.
But how do you explain this?
My menu and windows change color and pattern now.

Regarding MSC2N and MSC3N: Batch Display and Batch Change

Hello Guys,
I have faced a problem regarding batch display and batch change.
Scenario:
I have created a Process Order in COR1.
Using MIGO i made the goods receipt of that Process Order.
Now when i want to display for that particular material document number Details data..
In Batch --> Classification (you can check it also from MSC3N using the batch number of the particular material) there is a field named Availability Date its coming 0000/00/00.
But when i checked it from MSC2N in cange mode its coming with desired data.
Any valuable idea..
Regards,
Sayak

Hi,
This looks like a SAP Functional Query. Please post this in MM forum for quicker replies.
Forums->SAP Solutions->ERP - Logistics Materials Management (MM)

I have a MacBook Pro, using )S X, Version 10.6.8,Processor 2.53GHZ Intel Core Duo: it suddenly enlarged all displays and the items on my desktop became blurry. I tried resetting font sizes, and using "zoom out" but nothing worked. Any suggestions?

I have a Mac Book Pro, using OSX 10.6.8. The displays on any and all screens suddenly became larger and the files on the desktop screen became blurry. I don't know how to return to original appearance.

try a two finger drag on the trackpad holding the CONTROL key. You may be in a zoom mode.
Also check the settings in System Preferences>Displays>Display.
Ciao.

Display and icons shrunken after connexion to tv

After connecting my Macbook Pro to my TV (hdmi + adapter), the display and the icons would shrink on my Macbook, but as soon as I would disconnect it, it would return to my original settings (original size). Now, since the last time I connected my Macbook to my TV, it stays shrunken and does not return to its original size. I fixed the icons' size already by going in the "View Options", but I still can't fix the size of the lettering in my Macbook (e.g.: menu, taskbar, webpage, etc.). How do I fix this? THANK YOU!!!!

Disconnect the adapter. Open the Displays preference pane and set the resolution to Default for display.

Windows 8.1 filenames missing in all tile and icon veiw, including desktop.

I have Windows 8.1 Pro and had some sort of crash while I was at lunch. I came back, and all my icons where missing. I was unable to bring up Task Manager so I rebooted the computer by pressing the power button once for a 'graceful' shut down and restart
process. No errors came up, but then all my desktop icons only show their size instead of their name.
I brought up explorer and all folders were set this way. I was able to reset the folder view 'Details' to include the name so that all subfolders in Details view showed their name as well. I'm unable, however, to un-hide the file names in any other view
(including desktop) as there is no check box to uncheck 'Hide File Names'
Please help :/

I shall suggest you to go through a System Restore.Select any restore point when there was no problem.
S.Sengupta, Windows Entertainment and Connected Home MVP

IBook not waking up and screen changing colors

Hi everyone,
I've perused the previous posts and am having difficulty locating a post specific to my problem. My iBook is about 8 months old and has been working PERFECTLY up until a few days ago. The problem started when it wouldn't wake up after going to sleep. I'd close the screen as I've always done before, but when I opened it back up, it didn't seem to wake up. I subsequently had to do a hard reset. This continued throughout the day while I was testing it to see what the problem might be, then yesterday the screen started going crazy on me. It went black, then started randomly changing colors (green, red, blue, etc.). Clicking the mouse or hitting keys would do nothing. After a hard reset it would boot up and work fine for about 5 minutes or so, then the color changing would happen again. I haven't hooked it up to an external monitor yet...that's my next step. Any other ideas from anyone? Thanks!
iBook G4 Mac OS X (10.4.5)

So, I called Apple Support, and they instructed me to reset the PMU. I did so and the computer worked for about 20 minutes and now it's back to its old tricks. First the screen blacks out and then it either remains blacked out or goes crazy with randomnly changing colors. I can reset the PMU, but each time I do, it works for a few minutes, then blacks out again. I have Apple Care, so I'm not worried about the cost of any necessary repairs, but I am worried about the prospect of loosing my files. I don't have them backed up...I know, I know, I should have a file backup system. It's on the list of priorities. Any ideas/thoughts??

Hard Drive Icon Changes Color

The icon for rmy exernal drive changes flashes from dull gray to a nice color every so often. Only for a few seconds at a time. This is on the OSx 6 desktop. I only use this external drive for backups. It does it even when I'm not accessing the drive for backup purposes. Why?
When I open Finder, the left panel shows this external drive in orange color and my internal drive shows in solid gray. None of them flash in different colors.
Will reboot - tha seems to cure all kinds of flakie things but still have to wonder: "Why"?
Thanks if you can help.

See #B4 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of this forum).

Why have all my desktop icons changed to PDF when I installed Reader?

I just installed Adobe Reader, and all of my desktop icons have changed, and nothing will open. How can I fix this?

Hi Carol ,
This seems to happen just because the file associations of the files and folders have been changed and because of that you are experiencing this issue .
To change file associations you could refer the following link and see if that fixes the issue .This link is for windows 7 .
http://windows.microsoft.com/en-in/windows/change-default-programs#1TC=windows-7
Please follow the given steps and see if that works for you .
Fell free to write us back in case you face any difficulties .We would be happy to assist you .
Regards
Sukrit Dhingra

Sales order display-how to change color of item with high level 0

Please does anyone know how can i chenge the color of item with high level 0 in display of sales order in red or yellow so it can be seen better for better searching on page?
thank you in advance...
regards..

You'd probably have to do a modification in SD for that. But what you can do, is make the higher level item not changeable. You could also set the display range to UHAU to only see the main items, do this in transaction VOV8. Or you could change your item category in VOV7 only to show main items.
good luck

How to convert this into alv display and also change parameterstoselect opt

tables :mara,marc,stpo.
parameters: p_werks like t001w-werks obligatory,
p_matnr like mara-matnr obligatory.
*select-options : p_matnr for mara-matnr obligatory.
*parameters: p_werks like marc-werks obligatory,
*p_matnr like marc-matnr obligatory.
constants c_x value 'X'.
data: begin of it_comp occurs 0,
idnrk like stpox-idnrk,
ojtxp like stpox-ojtxp,
menge like stpox-menge,
meins like stpox-meins,
matkl like stpox-matmk,
end of it_comp.
data: w_topmat like cstmat.
start-of-selection.
perform explode_assembly.
end-of-selection.
perform write_report.
top-of-page.
perform print_header.
form print_header.
write: /(18) 'Component'(h00),
(40) 'Description'(h01),
'Mat.Group'(h02),
(18) 'Quantity'(h03).
uline.
endform.
form write_report.
write: / w_topmat-matnr under text-h00 color col_heading,
w_topmat-maktx under text-h01 color col_heading.
loop at it_comp.
write: /
it_comp-idnrk under text-h00,
it_comp-ojtxp under text-h01,
it_comp-matkl under text-h02,
it_comp-menge unit it_comp-meins under text-h03,
it_comp-meins.
endloop.
uline.
endform.
form explode_assembly.
data: it_stb like stpox occurs 0 with header line,
it_stb2 like stpox occurs 0 with header line,
it_stb3 like stpox occurs 0 with header line,
w_msg(255) type c.
Explode highest level:
call function 'CS_BOM_EXPL_MAT_V2'
exporting
auskz = c_x
capid = 'PP01'
cuols = c_x
datuv = sy-datum
knfba = c_x
ksbvo = c_x
mbwls = c_x
mdmps = c_x
BGIXO = c_x
MKMAT = c_x
MMAPS = c_x
FBSTP = c_x
FTREL = c_x
mtnrv = p_matnr
werks = p_werks
importing
topmat = w_topmat
tables
stb = it_stb
exceptions
alt_not_found = 1
call_invalid = 2
material_not_found = 3
missing_authorization = 4
no_bom_found = 5
no_plant_data = 6
no_suitable_bom_found = 7
conversion_error = 8
others = 9.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
into w_msg.
write: / w_msg.
exit.
endif.
Don't process documents
delete it_stb where idnrk is initial.
Don't process valid from furure:
delete it_stb where datuv >= sy-datum.
Explode phantom assemblies up to last level
*do.
it_stb2[] = it_stb[].
*delete it_stb2 where dumps is initial.
*if it_stb2[] is initial.
*exit.
*endif.
*delete it_stb where not dumps is initial.
delete it_stb where VPRSV <> 'S' OR MMSTA = '61'.
loop at it_stb2.
call function 'CS_BOM_EXPL_MAT_V2'
exporting
capid = 'PP01'
auskz = c_x
cuols = c_x
datuv = sy-datum
knfba = c_x
ksbvo = c_x
mbwls = c_x
mdmps = c_x
FBSTP = c_x
FTREL = c_x
mtnrv = it_stb2-idnrk
werks = p_werks
tables
stb = it_stb3
exceptions
alt_not_found = 1
call_invalid = 2
material_not_found = 3
missing_authorization = 4
no_bom_found = 5
no_plant_data = 6
no_suitable_bom_found = 7
conversion_error = 8
others = 9.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4
into w_msg.
write: / w_msg.
else.
delete it_stb3 where idnrk is initial.
delete it_Stb3 where sobsl = 50.
loop at it_stb3 .
multiply it_stb3-menge by it_stb2-menge.
modify it_stb3 transporting menge.
endloop.
append lines of it_stb3 to it_stb.
endif.
endloop.
*enddo.
Build table of components collecting the same components from
all levels
loop at it_stb.
it_comp-matkl = it_stb-matmk.
it_comp-idnrk = it_stb-idnrk.
it_comp-ojtxp = it_stb-ojtxp.
it_comp-menge = it_stb-menge.
it_comp-meins = it_stb-meins.
collect it_comp.
clear it_comp.
endloop.
ENDFORM.
using this i got the bom explosion and also i tried to use the following code
to diplay alv diplay,but i got the errormsg,
here i got only one material input,instead of i want to use
select options to from to ,if i give 1 to 10 material
ouput is
material 1
descripn
bom and components
materials 2
desc
bom comp
TYPE-POOLS : SLIS.
DATA : IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA : WA_FIELDCAT_LN LIKE LINE OF IT_FIELDCAT.
DATA : IT_EVENTCAT TYPE SLIS_T_EVENT.
DATA : WA_EVENTCAT_LN LIKE LINE OF IT_EVENTCAT.
DATA : IT_LAYOUT TYPE SLIS_LAYOUT_ALV.
DATA: S_COL_POS TYPE I.
DATA : IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA : WA_FIELDCAT_LN LIKE LINE OF IT_FIELDCAT.
DATA : IT_EVENTCAT TYPE SLIS_T_EVENT.
DATA : WA_EVENTCAT_LN LIKE LINE OF IT_EVENTCAT.
DATA : IT_LAYOUT TYPE SLIS_LAYOUT_ALV.
DATA: S_COL_POS TYPE I.
DATA : IT_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV.
DATA : WA_FIELDCAT_LN LIKE LINE OF IT_FIELDCAT.
DATA : IT_EVENTCAT TYPE SLIS_T_EVENT.
DATA : WA_EVENTCAT_LN LIKE LINE OF IT_EVENTCAT.
DATA : IT_LAYOUT TYPE SLIS_LAYOUT_ALV.
DATA: S_COL_POS TYPE I.
FORM BUILD_FIELDCATALOG.
PERFORM BUILD_FIELDCAT USING 'MATKL'.
PERFORM BUILD_FIELDCAT USING 'IDNRK.
PERFORM BUILD_FIELDCAT USING 'OJTXP.
PERFORM BUILD_FIELDCAT USING 'MENGE'.
PERFORM BUILD_FIELDCAT USING 'MEINS'.
ENDFORM.
FORM TO BUILD IN FIELD CATALOG FOR ALV FORM
FORM BUILD_FIELDCAT USING L_FIELDNAME LIKE DD03L-FIELDNAME S_TEXT LIKE DD03P-SCRTEXT_M.
CLEAR WA_FIELDCAT_LN.
ADD 1 TO S_COL_POS.
WA_FIELDCAT_LN-REF_TABNAME = 'IT_COMP'.
WA_FIELDCAT_LN-FIELDNAME    = L_FIELDNAME.
WA_FIELDCAT_LN-SELTEXT_M    = S_TEXT.
WA_FIELDCAT_LN-COL_POS      = S_COL_POS.
WA_FIELDCAT_LN-QFIELDNAME   = SPACE.
WA_FIELDCAT_LN-HOTSPOT      = SPACE.
WA_FIELDCAT_LN-JUST         = 'R'.
APPEND WA_FIELDCAT_LN TO IT_FIELDCAT.
ENDFORM.
FORM TO BUILD IN FIELD CATALOG FOR ALV FORM
FORM DATA_DISPLAY.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_HTML_END_OF_LIST       = ' '
I_STRUCTURE_NAME                  =
I_BACKGROUND_ID                   = ' '
   I_GRID_TITLE                      = TEXT-001
I_GRID_SETTINGS                   =
IS_LAYOUT                         =
   IT_FIELDCAT                       = IT_FIELDCAT
IMPORTING
E_EXIT_CAUSED_BY_CALLER           =
ES_EXIT_CAUSED_BY_USER            =
TABLES
    T_OUTTAB                          = IT_COMP
   EXCEPTIONS
   PROGRAM_ERROR                     = 1
   OTHERS                            = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
GIVE ME SOLUTION FOR THAT ON, VERY URGENT
THANKS IN ADVANCE
regards
ds

Hi
declare select-options instead of parameters
for converting a report to ALV
create a field catalog.
for this two option declare a itab with
fcat    TYPE slis_t_fieldcat_alv
and pass the field name,descr etc to fcat and append the same.
or create structur same as your itab and pass the same with FM
'REUSE_ALV_FIELDCATALOG_MERGE'
use either <b>reuse_alv_grid_display or reuse_alv_list_display</b> .
and pass the itab.
thanks
Shiva

Changed Display and when changed back, text blurry

I connected my computer to an external monitor yesterday and adjusted the display. After I removed the monitor, I put my display rate back to 1280 X 800. But for some reason all the text on the screen seems a little soft -- not completely blurry, just soft. Is there a setting that I missed when I reset my computer on its own without the external monitor?
Thanks!

I suggest you to upgrade Firefox to version 7 and post back to us
* getfirefox.com

Display and icons

Z10 now its giving me problem with the icons and display...the whole screen becomes so large.whn someone calls or im in the middle of the conversation i cnt even drop the call...pls advice wht to do...

How to Reload your Blackberry10 OS
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

On starting my iMac up all screens and icons are large

Hello all, when starting up m imac all icons including the log on screen are large and when I click onto safari the whole screen appears big, yet when my wife clicks onto her screen sign and her icons appear they are all correct, please help, am a complete duffer at computer jargon so please bear with me :-)

I think i had better explain this a bit better, hopefully, when I'm using Apple TV i.e using my films on my imac and transferring them through to my TV the iMac screen goes into large mode for want of a better word and will not go into the correct size when ive finished using Apple TV, my troubles all started when I downloaded a film onto my imac and it's gone bottom up since then.
regards
paul.

Suddenly all display and icons changed color

Similar Messages

Maybe you are looking for