SUIM results are confusing

Hello Experts,
I dont have much knowledge on security, looking forward to clarify my doubt from your experiences.
We are checking some users based on authrorisation values (combination of two authorisation objects and corresponding values).
1. SUIM -> Where UsedList -> In Users -> Authorisation Object (S_TCODE) with Transaction Code (SU01) -
> gives us list of 62 user id.
2. SUIM -> Where UsedList -> In Users -> Authorisation Object (S_USER_PRO) with Activity(value 22) -
> gives us list of 52 user id.
3. SUIM -> Where UsedList -> In Users -> Authorisation Object (S_TCODE) with Transaction Code (SU01) AND Authorisation Object (S_USER_PRO) with Activity(value 22) -
> gives us list of 82 user id.
So there are around 20 such users reported which were not listed in either of Step 1 or 2.
Results of step 3 are confusing, we are using AND with two authorisation objects, so result should be only those users which are available in both authorisation objects, it should be 52 only (common users in both authorisation objects).
What does AND do when used with more than 1 authorisation objects?
I hope i am able to explain my question, and would really appreciate if you can throw a light on this.
Thanks
Davinder

Thanks, i have selected RSUSR002 and everything seems to be working fine now.
Now if run SUIM with AND criteria, it gives me a list of users which are available in both the authorization objects -> acceptable by auditors
Thanks to all of you for your valuable time and sharing experiences...
But there might be few more inconsistencies, which we haven't observed till now.
Our system was upgraded from 4.6C to ECC6.0 (non unicode).
As pointed by Julius -->
perhaps the problem is also from earlier client application data. How old is the system and the data in the client?
If you have a reliable test system with the same client data, and can observe the same differences there... then try run function module SUSR_SYNC_USER_TABLES with the TABLE_TYPE parameter = 'X' to clear inconsistencies between the USR and UST tables. There is also a report, but I cannot remember it's name. Do a where-used-lookup on the function. Something like XPRA...
Can you please inform, how can we the find out data inconsistencies between USR and UST tables.
Thanks
Davinder

Similar Messages

I try to find something on my iPad, many results are emails, when I push on an email I can't see the email, because I get ever the first email,or the previous selected email in my inbox. How can I see the email selected?

I try to find something on my iPad, many results are emails, when I push on an email I can't see the email, because I get ever the first email,or the previous selected email in my inbox. How can I see the email selected?

Is your Yahoo account set up as POP3 or IMAP?

Windows 8.1 PC, using reader, when searching a folder containing approx 100 doc's. If i search for a word, no results are returned. only the doc names can be found but nothing from within the doc. This is a new problem and was not the case before.

Windows 8.1 PC, using reader, when searching a folder containing approx 100 doc's. If i search for a word, no results are returned. only the doc names can be found but nothing from within the doc.
This is a new problem and was not the case before.

Works perfectly fine for me with the latest Reader version (11.0.09).
You write that it worked "before"; before what? An update? Update from what version to what version?

When using private browsing to view image results in Safari 5.1.3, only the first two rows of results are visible, the following four or so rows display greyed out place holders, and the safe search button is inoperable. Suggestions?

When using private browsing to view image results in Safari 5.1.3, only the first two rows of results are visible, the following four or so rows display greyed out place holders, the remainder of the results page is blank, and the safe search button is inoperable. When I turn off private browsing and refresh the page, everything works again.
Anyone else having this problem?

I have got the same behaviour after the last Safari Update to 5.1.3. It seems that Safari now handles some scripts in a new way. If you debug the Google Website, you will see, that there is some Javascript Error, that seems to prevent to write into local cache. After some searching I wasn't able to finde a solution for this problem, other then disabling Javascript while private browsing to prevent the script loading. You then are able to use Google with the old layout. The option to disable JavaScript can be found in the Menu "Developer", wich has to be enabled in Safari in the options first.
In my opinion this is a bug that is now occuring, because Apple changed something in private browsing and that has to be fixed by Google now, to run again. Or we will have to wait for 5.1.4, as you can read online Apple will change and bugfix the javascript engine in that version, perhaps this fixes the problem as well. I hope so!
If anyone is in the developer program perhaps you could test this with the beta of 5.1.4 and tell us if it works.

Search results are not accurate

hi,
am facing a unique issue in SP 2013. Whenever we search for a search criteria the results returned is not accurate always. Every time we navigate across pages, the search results change which is not
a desired behavior. However we also noticed that the refiner panel does not change as well and it retains the old count which leads to inconsistent results when user selects a criteria from the refiner.
any pointers / helpful links regarding this issue, if any anyone has surfaced, is highly appreciated!
Das

Hi,
According to your post, my understanding is that search results are not accurate.
I recommend to run a full crawl and then to check whether the search results are correct.
If your incremental crawl is running, it may happen that, when you are viewing the data in the search result web part, the newly added content are not crawled yet.
So, after the content are updated, wait for some time.
Let your incremental crawl finish. Then view the results on the page.
More information:
Understanding how search results are displayed in SharePoint Server 2013
Searching new content with SharePoint Search
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Links from Search Results are not resolving or take a very long time.

The searches happen fairly quickly, but the links from the results are not resolving. I am unable to get the information I need. It appears there are performance problems with the site.
Lennie

This is the same problem I just posted on for searching DOC SITE!

Using Firefox 3.6.20 and Windows XP Home SP3. Firefox sporatically deletes bookmarks from the bookmarks toolbar. Additionally, when I try to import from a saved HTML file, Firefox does not import the complete file. Results are inconsistent.

Using Firefox 3.6.20 and Windows XP Home SP3. Firefox sporatically deletes bookmarks from the bookmarks toolbar. Additionally, when I try to import from a saved HTML file, Firefox does not import the complete file. Results are inconsistent.

A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

Input values in the result area

Hi Bw gurus,
Could you plz tell me to eliminate the Input values displayed between the Navigation block and the Result area.
I mean if we give some input range in the variable screen the range(Input)values are displayed in the Result area.Also if we give some 1000 multiple single values in the variable selection screen after executing it displyed
1000 input values in the result.
I need to elimeinate this.so how can i do this.
the requirement is very urgent.
Regards,
Rambo.

Hi Rambo,
Open query in BEx Analyzer, it'll be embedded into a workbook.
Use Layout/Dasplay text elements icon or menu path.
There you'll see the option to show variables. Don't use it and variable's values shouldn't show up!
And don't use show all.
Best regards,
Eugene
Message was edited by: Eugene Khusainov

Internal table for the result area

hey
where do the result area data stored in after the search? is it in internal table??. If so is there any possibility of finding the internal table?
thanks in advance

Hi Shailaja,
You can check as pointed by Vijay, which is at the Framework Level.
For Application Level (specific to your PCUI Appl), the QEURY method of your class (assigned to Search Area screen) returns the list of found object keys (based on the search query) to the READ method. The READ method now queries the backend, for the supplied object keys and stores all the result data in export parameter ET_SCREEN_SRTUCTURE.
Now the Framework with the help of One Order Interaction Layer, pumps the data to the Data Context Layer as pointed by Vijay.
So in order to do any data massaging, you can do it at internal table et_screen_structure.
But whatever changes you do in et_screen_structure, will not be commited to backend, without touching the MODIFY method.
Thanks
Harsh

The risk analysis results are different when choose report type as "summary" and "management" summary

Hello experts,
I found a expired user with SOD conflicts in "management summary" report format, but it doesn't exist in "Summary" report. You can find the screenshot in attached file. The user name is "YINPENG2_BK".
What happened? The result of different report formats are from different data source?
Sincerely yours,
Lynn

Hi Lynn,
that's not an issue from the system. It's more a handling issue as the results are splitted into several result sets. In management summary view you have only one result set as it's grouped by user and risk, whereas you have more than one in summary view (as you have multple entries for each user and risk).
Change to the second, third, etc. result set and you will see the user in the list:
Regards,
Alessandro

While drilling up/down the report, the results are displayed after delay

We have a WebI Report whose hierarchy is based on the time Year -> Quarter -> Month -> Day -> Hour -> 30 mins.
While drilling up/down the report, the results are displayed after much delay and most of the time, all / some of the values are displayed as "#REFRESH" or '##########'. However, if i refresh it, all the values are displayed.
What could be the cause for this issue? and how to troubleshoot it?
Thanks In Advance!!!

hi,
This error appears in cells due to smart measures when the value returned by the smart measure is not available. This occurs when the grouping set containing the value is not available with the data provider.
Remove the error by refreshing the data.
Regards,
Vamsee

Database Table where MRP Run results are saved-Urgent

Hi Gurus
i need your help in identifying the database table where the MRP Run results are saved , this is needed for creating a custom report similar to MD45(but for entire plant) where i can look and pull the sum of all the receipts and issues, ATP Quantity for a given material in a particular plant
and ignore zero quantities in the receipts and issues field
i tried in <b>MDTB</b> table, MDTB-MNG01 Quantity received or quantity required but it has no entries maintained in it and so it cannot be used.
So can you please help me with the table where i can get this information asap
thank you very much for your time and solution

Please use the code below which will help you in extracting data from MRP table.
You can enhance this program basing on your requirement.
*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
A sample program to extract data from the MRP table.
*+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
REPORT ZMRPTABLE.
TABLES: MDKP, "Header Data for MRP Document
        MDTB, "MRP table
        MDTC, "Aggregated MRP table items
        T457T. "Description of MRP elements
DATA: BEGIN OF MDTBX OCCURS 0.
        INCLUDE STRUCTURE MDTB.
DATA: END   OF MDTBX.
SELECT-OPTIONS: PLANT FOR MDKP-PLWRK OBLIGATORY,
                MATNR FOR MDKP-MATNR OBLIGATORY.
CLEAR: MDKP, MDTB.
SELECT * FROM MDKP WHERE DTART EQ 'MD'
                     AND MATNR IN MATNR
                     AND PLWRK IN PLANT.
    WRITE:/ MDKP-MATNR, MDKP-PLWRK.
    IF MDKP-CFLAG EQ 'X'.
       CLEAR MDTBX. REFRESH MDTBX.
       IMPORT MDTBX FROM DATABASE MDTC(AR) ID MDKP-DTNUM.
       LOOP AT MDTBX.
         MOVE MDTBX TO MDTB.
         SELECT SINGLE * FROM T457T WHERE SPRAS = 'E'
                                      AND DELKZ = MDTB-DELKZ.
         IF MDTB-PLUMI = '-'. MULTIPLY MDTB-MNG01 BY -1. ENDIF.
         WRITE:/ MDTB-DAT00, T457T-DELB1, MDTB-VSTAT,
                                          MDTB-MNG01, MDTB-LGORT.
       ENDLOOP.
    ELSE.
       SELECT * FROM MDTB
                     WHERE DTNUM EQ MDKP-DTNUM
                     ORDER BY PRIMARY KEY.
         SELECT SINGLE * FROM T457T WHERE SPRAS = 'E'
                                      AND DELKZ = MDTB-DELKZ.
         IF MDTB-PLUMI = '-'. MULTIPLY MDTB-MNG01 BY -1. ENDIF.
         WRITE:/ MDTB-DAT00, T457T-DELB1, MDTB-VSTAT,
                                          MDTB-MNG01, MDTB-LGORT.
       ENDSELECT.
    ENDIF.
ENDSELECT.
This is taken from www.sap-img.com
Hope this helps you.

Retrieving BEx Query Results Area for use in Excel formulas

Hello,
I run BEx queries in workbooks and then use Excel formulas ( mostly VLOOKUP(LookupValue, ResultsArea, ColumnReturned,) ) to retrieve certain information from the query ResultsArea.
****Problem:
Depending on the query parameters, the query "Results Area" is larger or smaller.
****Non-optimal solution:
One way to define the ever changing Excel range occupied by the Results Area is to create an Excel name as:
QueryRange = OFFSET(QueryFirstCell,,,COUNTA(OFFSET(Sheet1!$A:$A,,COLUMN(QueryFirstCell)-1,,)),COUNTA(OFFSET(Sheet1!$1:$1,ROW(QueryFirstCell)-1,,,)))
Then, the only input required is the top-left cell of the Results Area, which stays the same (unless the query definition changes).
****Question
What is the best way to refer to an ever-changing query Results Area in an Excel formula?
Thank you!
Louis

It is actually much easier than that.
Use a VBA statement like the following:
Set RptRng = ActiveCell.CurrentRegion
This will retrieve the data in the Results Area, no matter what the size is.
Hope this helps...
Bob

Insert a Blank Column in the Results Area of a Workbook

Is it possible to insert a blank column in the results area of a WORKBOOK that does not get affected by free characteristic drill down or refreshing of the corresponding query? The current workbook looks like follows
Column A - Characteristic1
Column B - Characteristic2
Column C - KeyFigure1
Column D - KeyFigure2
Column E - KeyFigure3
Column F - KeyFigure4
The requirement is that the user wants to enter some estimates between Column B and Column C and Column D and Column E as follows
Column A - Characteristic1
Column B - Characteristic2
Column C - USER ENTRY
Column D - KeyFigure1
Column E - KeyFigure2
Column F - USER ENTRY
Column G - KeyFigure3
Column H - KeyFigure4
Column I - CALCULATIONS BASED ON USER ENTRY
First I tried to split the results area and save the workbook. But when the query is refreshed then the entire results area gets back in one piece. I succeeded partially by having a key figure with no possible output (i.e., restricting a non-existent value on a characteristic). Again in here, whatever user inputs will get wiped out with the drill down. Does any one have any pointers? Thanks.
IS

Hi IS,
As a nearly workaround I can suppose to do the following.
Create two identical requests.
In the first one hide the columns to the right from your intended new user column. In the second one - hide columns to left.
Knowing the columns number to be shown in each request you can place both request in the same row, but in different columns taking into account that between result areas should be one (or more) additional column.
Data entered by a user will not be wiped out during query refresh or drilldown. Of course, these user data will not conform drilldown operations. So, it is not 100% solution you want.
Another possibility, very hard to implement (if feasible at all), is to write VB code that will monitor user action and will keep data entered by a user somewhere in another sheet and restore them in proper cells after user action (drilldown). But I don't think such coding worth it.
Best regards,
Eugene

Total is not displayed in Result area

Hello Experts
I have an issue related to the result area display in a bex Query. in the query, one of the Formula Figure does not display the Total or Sum in the result area where as i have selected its propertyof summation in Calculate Result as.
The Formula figure contains the Formula variable in it & the formula variable is based on replacement path of an info object's key value.
kindly suggest the solution to get the Total value in result area.
I have also check the related issue in SDN but they are not helpful.
Thanks in advance
Neha

My ques is :
I have two key fig
                                         A1                         A2
MatA                                 1                             3
MatB                                  2.2                        4.2
MatC                                  1.6                       2
Total                                 4.8
Now properties for both key fig are same that is Cal result as is fixed with "Summation / Total/SUM" , but still in key fig A2 the total value is not displaying.
Please advice

SUIM results are confusing

Similar Messages

Maybe you are looking for