Summary Published to Search for Projects?

Is it possible to have the "Summary Published to Search" checkbox for Project documents? I know this exists in Master Agreements. I am wondering if this field can be configured on a Project and behave in the same manner as it does with MAs. I know how I can get the field and checkbox itself on the Project Header, but what I am not sure on, or if it is even possible, is to get it to behave in the same manner. The ultimate goal being able to have a Project that cannot be seen when searching via All Projects query. Any guidance would be much appreciated! Thank you!

Hello Nicholas,
Please find below query,
SELECT <%RESULTS%> FROM <%SCHEMA%>.FCI_PRO_PROJECTS T1 LEFT OUTER JOIN <%SCHEMA%>.FCI_MAS_VALUE_LIST_VALUE T2 ON (T1.STATUS_OBJECT_ID = T2.OBJECTID)
LEFT OUTER JOIN <%SCHEMA%>.FCI_MAS_INTERNAL_CAT T3 ON T1.INTERNAL_CAT_OBJECT_ID = T3.OBJECTID LEFT OUTER JOIN <%EXT_TABLE(projects.projects)%> T10
ON T10.PARENT_OBJECT_ID = T1.OBJECTID <%DYN_JOIN%>
WHERE T1.IS_TEMPLATE=0 AND T1.CONTEXTID=<%CONTEXT(projects.projects)%> AND T10.BUYER_SEARCHABLE_PROJECT=0
<%AND_OP("T1.INACTIVE",<%?(T1.INACTIVE)%>)%>
<%DYN_FILTER%>
<%AND_OP("UPPER(T1.UNIQUE_DOC_NAME)",<%?(T1.UNIQUE_DOC_NAME)%>)%>
<%AND_OP("UPPER(T1.DISPLAY_NAME)",<%?(T1.DISPLAY_NAME)%>)%>
<%AND_OP("UPPER(T1.DOC_OWNER_USER_OBJECT_NAME)",<%?(T1.DOC_OWNER_USER_OBJECT_NAME)%>)%>
<%AND_OP("T1.STATUS_OBJECT_ID",<%?(T1.STATUS_OBJECT_ID)%>)%>
<%ORDERBY%>
In the above query, I have placed a condition T10.BUYER_SEARCHABLE_PROJECT=0 which will retrict all the projects in which the created checkbox field is checked.
Regards,
Vignesh

Similar Messages

Summary Published to Search?

Can someone explain to me how the "Summary Published to Search" boolean is intended to work? I believe this is an OOTB field in agreement documents. My understanding is that this field is checked by default so the document can be searched for within a search query. And if you were to uncheck the box, the document would not be returned in a query search. Is that correct? From what I am finding, this field is not having any effect on whether or not a document can be found in a query. I am able to find the document if set to true or false (checked or unchecked). I am misunderstanding the purpose of this field or could there be something that is not configured properly within the query definitions?

Hi Nicholas,
this is used for TREX - the Text Search that you can use (it's the top right hand corner search function). Keywords are stored and the document can be found through that particular search method.
It's not related to Query Search Results.
/Anita

Searching for Projects in Finder

Is that possible to locate the projects that i created i Aperture in Finder or Find Any File?
That was possible in iPhoto.

No for Projects.
Yes, but with warnings, for files.
Aperture is an image management system. It replaces the now outdated (and, imho, always hobbled) file management systems used for years to manage image files. One of the central preceps of Aperture use is that once you commit an image file to Aperture, you must use Aperture to manage that file. In other words, no making any changes in Finder.
The files you import become, in Aperture-speak, Masters of the Images you see in the Aperture Viewers and Browsers. Every Image has a Master. The Master is a file stored on one of your drives. Referenced Masters are stored wherever you tell Aperture to put them. They will show up in Finder. You can also right-click an Image in Aperture and select "Show in Finder", which will open a Finder window.
Managed Masters are the default. These are stored inside the Aperture Library. The Library is a Finder Package. It shows in Finder as a single file with the extension "aplibrary". The contents of Finder Packages do not show in Finder unless you tell Finder to show them to you. You do this by right-clicking a Package, and selecting "Show contents".
Why are you trying to use Finder to locate Masters and Projects? Aperture excels at Image (and Project) management.

Searching for Project file through Sequence name

I have forgotten the title of the project, but know the names of the sequences within the project. How can I search by the sequence name to locate the project? I have Windows 7 and the project is either in Premiere Pro 5.5 or 6.0. Thank you very much!

If you look in a .proprj file from CS6 and before you will see it is just XML. Simply formatted text. On a PC, use Wordpad to open a copy of a project and you will see what I mean. Not Notepad because it doesn't understand XML, but Wordpad works OK. Just search a file you know has a sequence you know the name of.
So, if you know the name of the sequence, yes, it is in plain text that can be searched. The program I suggested can find it. The reason I use that program is that it allows me to change a menu or link on every web page on my site all at once.

Quick Question on Searching for Project Files

I was wondering if anyone knew of the best way to find FCP project files.
I have many computers at work that are all networked together, as well as a few LaCies, and I'm thinking I may have some wayward FCP projects floating around somewhere. I also work with youth, as assistant editors, who have a tendency to sometimes move things around. As you can see below I have 10.3.9, so when I do a 'find' I can't specify FCP projects because they have no extension (?). Anyone have any tips?
Thanks.

Hi Ariel
I'm completely baffled.I'm using FCP5. I can only assume that my "Find method" does not work with version FCP4.5HD and 10.3.9.
I've double checked my Project Files, and the files in my AutoSave Vault. None have the extension .fcp
But when I use Find: Name>Contains> .fcp they all show up (hundreds of them from 6 projects done over the past few weeks). Wish I could send you a screen snap.
Regards. Robert
P.S. Sorry I couldn't get back to you earlier - I had to go out most of the day.

Searching for a Project status = CLSD and open purchase orders?

Hi,
I am searching for a project status (Project Builder CJ20N) which allowed my to set a CLSD or a simillar status for settlement with open purchase orders.
This staus should allowed to process with open orders BUT not allowed to add new orders after setting this status.
Have somebody any idee? Or it is impossible?
Tahnk you in advanced for your Help.
Regards Baldy

Hi TV-kid,
while I was waiting for an answer I got to the same conclusion, so what you offers me is quite tempting actually.
I got a look to your website and it seems convincing. Still though, your case studies are in other business area, It's only a mater of good knowledge of File Maker.
I did download the test-drive last version of File Maker plus their samll Business Solution. I did read most of the documentation and the learning process would be too long to construct ourself a good crossed-data base.
I'd like to get in contact with you to look for a possible colaboration. to get private, I'd liketo do it through your contact link in your website .
To whom shall I write?
Thanks
Cheers
Cheers

How do I search for a phrase in a published Help?

This is probably a very basic question, but I've been unable
to search for a phrase in a published Help. For instance, if I want
to search for the phrase:
subject information, I've tried "subject information",
(subject information), subject NEAR information. I've received the
same list of "hits" for all of these, but when I search for the
phrase in any of the topics, it doesn't seem to exist.
I am using Adobe RoboHelp HTML 6 and use the WebHelp layout.
Thanks for any help - this is making me (and the users)
pretty crazy.

Basically you have two options.
1] Use ZoomSearch as described on my site. It is low cost and
gives much improved search options.
2] Upgrade to RH8 as that introduced phrase searching in
webhelp.

Premiere Pro CC's sequence lost. Is there a way to "search" for it from outside the project?

I seem to have lost a sequence created in Premiere Pro CC. I can't find it anywhere inside the Project bin.
We have so many same-name, older projects (between Auto-Save, different drives and so on) that looking inside each of them would take forever.
But we do know the name of the sequence. I am wondering if there is a way to "search" for a sequence name from outside the project?
Thanks

there is a way to "search" for a sequence name outside of the project,
but it would be a pointless waste of time.
sequences are only saved within the project file itself!!
We have so many same-name, older projects (between Auto-Save, different drives and so on) that looking inside each of them would take forever.
better get at it then!
hahahahahahahaha!!!

IMovie searching for files for project that does not exist...

Whenever I fire up iMovie 09 on Lion, it spins, and then tells me it can't find a video file for a project that does not exist. That is, it says 'File xxx.mov from project 'Movie 1 cannot be found - without this file the movie cannot be played.' The project is one I deleted a long time ago, and does not appear in the project list. How can I force iMovie to forget about this?
Thanks!
PS the specific error is 'Searching for movie data in file "New Project 1 - Large.m4v". The only button is "Stop". so I press that, then a new dialogue box saying 'The movie file 'New Project Large.m4v" cannot be found. Without this file, the movie cannot play properly." It has cancel and search buttons. Obviously, searching doesn't help - it was deleted a long time ago. Cancelling makes it go away until iMovie is launched again.

Whitecity,
This is awesome.
So moving forward from here, you can narrow down which event is causing the behavior but systematically trial and error. Once you determined the exact event folder, there are subfolders underneath:
/iMovie Movie Cache/
/iMovie Stabilization/
/iMovie Thumbnails/
Try removing these to see if iMovie rebuilds them.
Calbe

How to: Search for a string in entire movie project?

I used a copyrighted name a few different places as I was creating a very long and complex game. I have since removed it from the game where it was previously showing up but when I search the exe, it's still there in a few places. Is there a way to search the entire movie project and all content, all scripts for a particular string? For instance "Microsoft".
If so, I cannot find a way and could use some direction, even if it's an xtra I need to install that adds this capability.
Thanks!!!!!

Scripts are easy. You open any script window and hit Ctrl + F and enter your search term in the Find box, ensuring the "All Casts" radio button is checked.
For text and field members you'll need to write a script that does the search for you. If you were clearer about what you want to happen when you find your search term in a text member then someon could help you with how to perform this. I know there is already code posted to the forum somewhere about how to examine every member of every castLib checking the member type - which would be a very good place to start.

Search for a project

Is there a way to search for a project? I imported 6 years worth of files, previously organized under Windows in folders - "year/[group of dates equal to DVD size]/date-subject description" (e.g., "2006/010106-022806/20060101-NewYears", etc.). I would like to search for "newyears" and have all projects with that phrase in the name show somewhere or filter out the rest (or even just go to the next project containing the phrase).
I can't seem to find such a capability in Aperture. I haven't seen it mentioned in books or in a search of the forum. I would have thought that would have been a need for a professional photographer or advance hobbyist, the audience for Aperture.

This is the reason why I always add a keyword named as the project where the image is.
Aperture still have to include more searching options, the actual ones aren't good for everyone needs.

Veristand Problem: When Configuring a project, searching for a library file as a dependent file

Hi,
The problem that I am having is that I took all of the necessary files in order to run a project and moved it to a different computer. When I open Veristand, and try to configure the project, a pop up window comes up with "Search for Dependent File: [filename]". It then says the missing file and the search directory. You can also browse for the file. So, for about the first couple of files, I just browsed for it and it was fine. But when it reaches a library file, I try to open it and it opens the library inside of Veristand. I think it thinks that I'm trying to get the file from inside of the library instead of the library itself.
Any thoughts greatly appreciated.

Continued here
LabVIEW Champion . Do more with less code and in less time .

Veristand Problem: When Configuring a project, searching for a library file as a dependent file.

Hi,
The problem that I am having is that I took all of the necessary files in order to run a project and moved it to a different computer. When I open Veristand, and try to configure the project, a pop up window comes up with "Search for Dependent File: [filename]". It then says the missing file and the search directory. You can also browse for the file. So, for about the first couple of files, I just browsed for it and it was fine. But when it reaches a library file, I try to open it and it opens the library inside of Veristand. I think it thinks that I'm trying to get the file from inside of the library instead of the library itself.
Any thoughts greatly appreciated.

Continued here
LabVIEW Champion . Do more with less code and in less time .

I have a problem with elements 8. When ever I start a new project, the program searches for the old, latest used filmmaterial, I have used before. That means, if I use a different DVD, it take so much time, until the program starts. So how can I stopp the

I have a problem with elements 8. When ever I start a new project, the program searches for the old, latest used filmmaterial, I have used before. That means, if I use a different DVD, it take so much time, until the program starts. So how can I stopp the automatically uploading of old material?
Thanks

You have 2 unreachable statements in this method.
public static int eval(String s2, String op, String s3) {
return lookup(s2);
return lookup(op);
return lookup(s3);
} You're missing a } at the end of this method:
public static int lookup(String s) {
    for(int k = 0; k < symbols.length; k++){
        String symbol = symbols[k];
        if(s.equals(symbol))
            return k;
    }You have some loose } and ; at the end of the file:
public static void main(String args[])
commandline();
}

In search results, Summary sometimes shows the top of file, not the text I searched for

I'm searching lots of html files, it's a web site that's not imported into Sharepoint. Search is returning the correct files, but about half the time the Summary contains the text at the top of the html file, not the text surrounding the text I searched
for. It's a big problem, users have to open the file then find the search text to see if it's useful.
If I search for 'potato' here's an example Summary which is ok:
All pages in issue FTDA-1983-0409:
00010002000300040005000600070008000900100011001200130014001500160017001800190020
… today's dieticians, the potato … most of us enjoy a
potato cooked …
Here's a Summary just showing text from the top of the file, 'potato' is present, but lower in the file:
0001000200030004000500060007000800090010001100120013001400150016001700180019002000210022002300240025002600270028
… issue: date: January 19, 1980, page …
Could anyone help me get it to consistently show the text around the search text please?

You can't attach a screenshot to the first post that starts a thread, but you can do that in subsequent replies.
Does this only happen on one specific website?
Can you post a link to a publicly accessible page (i.e. no authentication or signing on required)?
It is possible that there is a problem with that web page and that there is a clear:both CSS rule missing that causes Firefox to start the next line at the horizontal position where the previous line ended.
If you have made changes to Advanced font settings like increasing the minimum/default font size then try the default minimum setting "none" and the default font size 16 in case the current setting is causing problems.
*Firefox > Preferences > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
Make sure that you allow pages to choose their own fonts.
*Firefox > Preferences > Content : Fonts & Colors > Advanced: [X] "Allow pages to choose their own fonts, instead of my selections above"

Summary Published to Search for Projects?

Similar Messages

Maybe you are looking for