Support for ActiveSync Smart Forward and Smart Reply still missing?

Hi,
am I right that current device OS (tested 10.3.1.1565) is still *not* supporting ActiveSync options "Smart Forward" and "Smart Reply"?
If so, is there an ETA when these options will be supported?
Thanks in advance,
Frankl

Hi, anyone being able to answer these questions? Thanks, Frank

Similar Messages

  • Smart-Forward and Smart-Reply

    Love the iPhone but we have noticed in our business that it simply doesn't support all the ActiveSync protocols. The most notable one is Smart-Forward and Smart-Reply.
    The net result of this is (1) we risk losing formatting when forwarding emails (particularly "embedded" or attached emails, which get mixed in to the main email body on forward); (2) large attachments need to be forwarded in full locally on the handset rather than on the server side (as with BlackBerrys and other devices), resulting in huge data bills when roaming, long sending times and also difficulty when in spotty reception areas; and (3) header information is not maintained as with Outlook.
    We have been submitting feedback to Apple from the outset, with no resolution in sight or acknowledgement that this is even a problem. It also does not appear to be fixed in the forthcoming iOS 4.1.
    Does anyone know of a workaround to get Smart-Forward or Smart-Reply working on a iOS device? Everyone in our company has been forced back to their BlackBerrys for the time being as IT have said the iPhones are too unreliable for business email and that Apple are doing nothing to rectify the issue. It's a shame as we like the devices for everything save for their rubbish business email support.
    Thanks

    You are not alone. - The missing of SmartReply/SmartForward is the biggest disadvantage of iOS for business users.
    All mobile devices with ActiveSync use the SmartReply protocol, so the mail never really leaves Exchange and mails are replied/forwarded in seconds. The devices only send their answer texts to the server and the server compiles the reply. Apple left out this protocol and uses the standard SendMail protocol. This means: to forward an attachment you have to download it to the iPhone/iPad and upload it again. Since mobile devices are used mobile it becomes nearly impossible to forward a bigger attachment. Worst, the iPhone only allows 9 MB to download. So forwarding a file bigger than 9 MB is just not possible.
    We as a record company need to forward big attachments (MP3s, TIFs…) from our mobile devices all the time and none of the other mobile OS’s is as easy to use as the iPhone OS. We have tried Android, WebOS, etc. But when it is getting hectic and you have to rely on the hard- & software to do its job the iPhone is the only accepted device (except BB and WM that have no entertainment factor which is important too because this let the employee stay connected to the team even in the free time.
    The reply behavior of the iPhone Mail.app is unfortunately similar to most of the IMAP mailers:
    The source code of a HTML mail is modified when replying and codes which Outlook has put there for reason are deleted or transformed so that the original mail comes back with a different layout.
    You can test it by yourself, if you have Outlook (2007/2010). Send yourself a HTML e-mail with two lines and reply it once from iPhone and once from Outlook, OWA or any ActiveSync device except iPhone OS. Then compare the source codes. You'll see the difference. The most obvious effect is the double line space in Outlook now. You sure know that the HTML code for "new line" is "br". But when you hit Enter in Outlook it generates a special Office paragraph "o:p" instead of a standard line break "br".
    As long as all users communicate with Outlook it doesn't matter, because "o:p" are shown as "new line". But as soon as the conversation leaves Outlook/OWA/ActiveSync (e.g. iPhone) and comes back "o:p" has become "p" which means that all lines are now double spaced.
    SmartReply would solve all this. Forwarding a 50 MB is done in no time and all Office codes are being kept.
    Our workaround so far: We have set up our own Exchange server and installed the Exchange add-on “OWA for PDA” (http://www.leederbyshire.com/OWA-PDA.asp). We redesigned it to be iPhone friendly, use HTML and some other things. We now have a fast and reliable webmailer for the iPhone’s Safari which also allows access to (really) everything that is supported by the Ex210 Outlook Web Access. 99% of all features like flagging of emails are possible with the add-on.
    We are currently working on an offline Web App based on jQTouch, so that the webmailer becomes similar to the (well designed) Mail.app in iOS and stores as many information as possible for offline access.
    We are currently looking for partners to return some of the cost of developing all this. So if you or anyone is interested in a cooperation please contact me.
    Sebastian

  • Is there Camera RAW support for Lightroom 4.4 and Canon 7D Mark ii?

    I need Camera RAW support for Lightroom 4.4 and Canon 7D Mark ii.  Is there a Camera RAW version for me? 

    Thanks for your help.  I checked out DNG on YouTube and understand more
    about it.  I downloaded the DNG converter and transferred in files from my
    camera.  Then I imported into Lightroom.  It works!   Thanks again.
    On Wed, Nov 19, 2014 at 5:56 PM, Jeff Schewe <[email protected]>

  • Hebrew support for nano 2nd gen and ITunes

    Hi,
    I have a new ipod nano. I've installed ITunes, and all my hebrew named files are being displayed with strange font (Giberish)
    Is there any way to get hebrew fonts support for the ipod nano and the ITune 7.0 software ?
    Dani

    I know that this question has been asked before on these forums. Have you done a search for this regarding Hebrew on these forums? Although the links provided above do not offer support for the nano. Have you tried doing a search on google for a possible solution to your question. It might be good to leave feedback regarding support for hebrew text for the ipod at the link below.
    http://www.apple.com/feedback/ipod.html
    GFF

  • To Bentley Wolfe, Adobe, re: Locked [ADOBE FYI] : Getting Support for Flash Player 10 and Issue Tracking post

    Hi Bentley,
    I wanted to tell you that an important link you posted does
    not work and says "Sorry, this page is not available".
    It is in your post entitled "Locked [ADOBE FYI] : Getting
    Support for Flash Player 10 and Issue Tracking post", and is at
    http://www.adobe.com/cfusion/webforums/forum/messageview.cfmforumid=44&catid=184&threadid= 1400586&enterthread=y.
    The link that is non-functional is "If you have issues
    installing Flash Player 10, first troubleshoot your issues using
    http://www.adobe.com/support/flashplayer.
    Read the technotes, do some testing.".
    I just wanted you to know, since you have gone to all of the
    effort of posting it. I apologize for having to start a new thread,
    but I was unable to post to your thread, since it is locked and
    read-only.
    This is the issue I am dealing with myself, and desperately
    need help with. :)
    Thank you so very much,
    Karen

    Hi Bentley,
    I just noticed something. The link that I pasted, to your
    post, does not work either. I noticed why, however, and it seems to
    be why the link in your original page does not work, and why the
    link in my post that goes to your post does not work.
    It seems to be that if a link has a period after it (i.e., if
    it is at the end of a sentence), the period is incorrectly included
    in the "real" link. Somehow, whatever mechanism that processes the
    post has a mini bug in it.
    If you go to the link that is results in "Sorry, this page is
    not available", and look up into the browser address bar, you will
    see the period there each time.
    I just thought that I would point this out, too, so that the
    web techs in charge of the workings of the forums could look into
    it.
    Here is the original link, without a period after it, to your
    original page.
    http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?forumid=44&catid=184&threadid =1400586&enterthread=y
    Thank you again,
    Karen

  • How can I install asian script for language support for bangla in safari and install a font??

    how can I install asian script for language support for bangla in safari and install a font? Some websites are working fine in ipad and iphone4 but not in mac osx supported imac or macbook. Example: www.sonarbangladesh.com.

    You just need to install a font, like one of these:
    https://sourceforge.net/projects/onkur/
    http://www.ekushey.org/?page/osx
    For non-Unicode sites, see
    http://m10lmac.blogspot.com/2011/04/reading-non-unicode-indic-language-web.html

  • [SOLVED]Support for cores revision 0x17 and 0x18 disabled...

    Everything is perfect on my arch linux setup except the following message I get at boot
    Support for cores revisions 0x17 and 0x18 disabled by module param allhwsupport=0. Try b43.allhwsupport=1
    Help please
    EDIT: After some googling I found a spanish website and did the following
    Uncommented '#RuntimeWatchdogSec=0' in /etc/systemd/system.conf
    And now it finally stfu. I've  also added in the boot parameters after quiet splash loglevel=3
    Last edited by sexyzero (2013-10-01 12:13:04)

    I did, you linked to it already
    I slightly modified modemmanager-git in the AUR and added some dependencies, the git version now works for me.

  • On my iPad2, the buttons for Top Ten, Genres and New Releases are missing.  How do I get them back.

    On my iPad2, the buttons for Top Ten, Genres and New Releases are missing.  How do I get them back.

    If the menu bar is hidden then press the F10 key or hold down the Alt key, that should make the menu bar appear.
    * Go to "View > Toolbars" and check-mark "Menu Bar" with a click if you want to make that permanent
    See [[Menu bar is missing]]

  • Dropping support for Internet Explorer 8,  and  Firefox 20.x or below

    Starting April 30th, we will discontinue support for all Internet Explorer 8 versions and all Firefox 20 versions and below. In order to continue using Business Catalyst Admin user interface without problems, you and your clients need to upgrade to a more recent browser:
    Download Internet Explorer
    Download Safari
    Download Chrome
    Download Firefox

    Thanks for your reply Shay.
    We plan to officially support IE8 with the next patch release to JDeveloper 11g - currently planned for later this year.That matches what I wrote in my initial post in this forum thread about IE8 support.
    We usually only certify browsers after they officially go production.That does not really answer my question (q1) in this forum thread.
    It is more like, how can I assess that Oracle will support any successor(s) of IE8 or successor(s) of any currently supported browsers for ADF 11g applications in the future? How long will Oracle support "commonly used browsers" for an ADF 11g application I build today, so how long will I be able to use that application?
    How do I answer such questions for ADF 11g applications that should be deployed on the internet (where, as some extranet environments, you typically have not that much (or no) control over which browsers your users use ... although some would like to argue with that, see forum thread "ADF Faces RC browser support and browser market share")?
    (By the way, do you have any feedback for the forum thread "ADF 10g support for Internet Explorer 8"?)
    regards
    Jan

  • Difference between Smart Mailbox and Smart Mailbox Folder

    What are the reason(s) for using one over the other?

    I know it's a bit less than obvious, but they're not equivalent or an "either/or". A "Smart Mailbox Folder" allows you to put your Smart Mailboxes into folders for grouping purposes. For instance, you could have a Smart Mailbox that collects all your messages to and from a friend of yours named "Sam", one that collected message to and from "Frieda", etc. and collect them all in a Smart Mailbox Folder titled "Friends". It's strictly an organization thing, for your own convenience, sort of like putting playlists in folders in iTunes, if you're familiar with that. If you only have a couple of Smart Mailboxes, a Smart Mailbox Folder probably won't be of much help, but if you have a bunch of Smart Mailboxes, organizing them into folders might be useful.
    Hope this explains things.
    Regards.
    Message was edited by: Dave Sawyer

  • How do I get support for Windows 7 on, and a W7 backup disk for, my new ThinkPad?

    I know these have got to be stupid questions, since I am sure that they have to have been asked before (unless they are clearly explained somewhere that everyone else has found, and I am somehow completely missed it), but I did search the forums and was surprised NOT to find any info on getting Windows 7 technical support after it was factory installed in a month-old Thinkpad. I wonder if the apparent defects in my W7, or maybe a different problem in my browser, could be affecting my ability to search to forums?
    I believe that my Windows 7 is defective, but calling Lenovo, they just talked about reinstalling Win7 from the partition, which makes no sense, if my W7 copy is defective, wouldn't the copy in the partition be defective too? My mom said she ordered a $20 W7 backup disk with the PC, but I never received it, and now Lenovo tech tells me those aren't actually available, and she must have confused it with the W7 upgrade disk, which didn't sound right, since I thought the upgrade disk was over $100, and I never received that one either anyway. If the W7 that was factory-installed is defective, I am assuming it's a copy of the same one in the partition, so that partition recovery is not feasible, is there any way to reorder a W7 re-install disk that will still register as Genuine Windows 7 on a Thinkpad? Now when I search the Lenovo site, I cannot find ANY W7 disks of any kind, neither a backup for factory-installed W7, nor for upgrade from a prior Windows version. Does anyone know how I could go about re-ordering the W7 backup disk when it appears to be missing from the online catalog? Unless this too is a defect in my browser search: can someone give me the link to page where I could select and re-purchase a W7 backup disk?
    It has been a few years since I had a new PC, but I have never even heard of one before that did not come with instruction manuals and OS and support disks, and did not provide any tech support for its own factory-installed software or Windows, at least during the first few months of ownership. Where do new Thinkpad owners turn for individual W7 software support, since Microsoft swears it is Lenovo's responsibility to support W7 under its OEM license, yet Lenovo swears they only support hardware? It almost seems that new users are expected to know everything already, or be initiated enough with the product to know exactly what your problem is and what's causing it, in order to find an online fix. Who do you call if W7 or Lenovo software (but not an ISP issue) appear to be doing something to prevent online access, but there are no discernible hardware issues? Where do you call for individualized W7, as well as Lenovo software, support, especially after no one online has ever heard of your specific issues and has no workable ideas for fixing them, or when your problem prevents you from getting online at all?
    Thanks so much

    http://www.apple.com/support/bootcamp/
    Boot Camp Assistant is already on your computer. You just need to buy Windows. Read the instructions and help files very carefully. Back up your data before taking on this task.

  • Sync Smart Groups and Smart Mailboxes across network

    Is there a way to Sync my Smart Groups in Addressbook and Smart Mailboxes in Mac Mail across my Macbook and My iMac? I have iCloud.
    It would be nice if I did not have to duplicate these "Smart" groups on each computer.
    Thanks Mac Community.

    Can you just type out the criteria of the smart group, or post a screen shot of the smart group.
    With all the editorializing, I can't figure out what you want to do.
    Where are the contacts in the groups, iCloud or On My Mac?

  • DAQmx Error: Non-buffered hardware-timed operations are not supported for this d evice and Channel Type.

    Hello,
    I am new to NI and to data acuasition cards in general. I am trying to put an application togather that would play large audio file using NI9263.
    And i am getting the following error.
    DAQmx Error: Non-buffered hardware-timed operations are not supported for this device and Channel Type.
    Status Code: -201025
    Does my hardware support buffering ?
    can i use the EveryNSamplesCallbackAO function ?
    Any sample code, will be helpful at this time. Thanks.

    Hi yma200,
    Are you using a USB 9263?  If so, this might be of help:
    http://digital.ni.com/public.nsf/allkb/EC1968728E660B288625780700570D06?OpenDocument
    If it doesn't help, can you please post the code that you have that is causing your error?
    Regards,
    Bogdan Buricea
    Applications Engineer
    National Instruments

  • Support for Olympus E-510 and E-410

    Hi,
    Will the upcoming 1.1 update provide support for the new Olympus E-510 and E-410? If not, when can this support be expected?
    Jim

    This page shows all the supported formats.
    Lightroom 1.1 will support all those in ACR 4.1
    http://www.adobe.com/products/photoshop/cameraraw.html
    Richard Earney
    http://inside-lightroom.com

  • Support for Olympus E-620 and Lens

    I don't see any support for Olympus in ACR 6.2. Where is it?

    The camera itself is supported.  That means it is possible to work on the raw files in Camera Raw.  But there is no support for the lens.  That is a different profile.  It will be necessary for you to wait and see if the profile is eventually provided, create one yourself, or see if there is one available online.
    percyflewfirst wrote:
    I am looking in ACR under lens corrections > profiles. No Olympus listed there.

Maybe you are looking for