Support for more than 2 montors ??

Hey, if I have 2 cards in my MP can I hook up 3 monitors?

You can hook up as many monitors as you have video cards and slots in your machine.
Some modern video cards can drive multiple monitors. With four slots all populated with dual-link video cards, that gives you 8 displays.
You also get to set the relative position of each monitor, so monitor 1 is to the left of monitor 2, which is above monitor 3, etc. This gives you a virtual desktop that spans all your monitors.
FWIW, The Mac II, dating back to 1987, was the first Mac that supported multiple monitors. With 6 NuBUS slots you could add 6 video cards and, hence, 6 monitors, so this is nothing new to Macs.

Similar Messages

  • Support for more than one hierarchy

    Is it possible to include more than one hierarchy in a Crystal Report? I have tried and am getting some unexpected results. I have two groups, each with it's own hierarchy. When I run the report, the top level hierarchy is returning "extra" summary nodes for each level below the top level.
    Let's say the hierarchy looks like this:
    USA
         East Coast
         Central
         West Coast
    When it is brought back into Crystal, it looks like:
    USA
        Central
        West Coast
        East Coast
        Central
        West Coast
    The summaries get split up between the extra summary nodes.
    It works fine if I remove the hierarchy from the second level group. It appears that Crystal doesn't handle two hierarchies correctly. Has anyone else tried this? Is the solution to use a structure for the second level group?

    hi Mike,
    you are going to have a hard time to really build what you looking for.
    I can see couple of options:
    - correct - using structure could be one of them
    - do you need to display both hierarchies in the report or could it be "enough" to show one hierarchy and use the other hierarchy nodes as a variable ?
    Ingo

  • Add Support for more than one language to my APP

    1st off - sorry, most likely this is the wrong place to ask this question - I did a lot of searching but did not come accross any simple solution.
    I wrote an app that supports about 10 languages - but in the store it only Shows up as "english" - also if I try to publish an update I can only select "English" as a language to add the description.Is there a simple way to add more languages?
    Thanks a lot!!!

    Hi Duder21,
    >>Is there a simple way to add more languages?
    For making our app to support multiple languages, please try to refer to the following articles:
    #Globalization and localization for Windows Phone:
    http://msdn.microsoft.com/en-us/library/windows/apps/ff637522(v=vs.105).aspx .
    #How to build a globalized app for Windows Phone:
    http://msdn.microsoft.com/en-us/library/windows/apps/ff637519(v=vs.105).aspx .
    Besides, you can also download the sample code from
    here .
    Best Regards,
    Amy Peng
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Feature request: Support for more than 2 monitors

    I currently use an external monitor for my critical editing/evaluation as my iMac display doesn't reproduce reds very well. I understand newer iMacs can support 2 external displays, obviously desktop machines can support as many displays as there are open slots for video cards.
    While editing a photo shot in portrait on a monitor set for landscape is not a problem, it would <really> be cool to have two external color-accurate monitors for developing/loupe views, one oriented in portrait, one in landscape, with the third (iMac in this case) showing the develop controls. Even if the two external monitors showed the same image, one would always be fullscreen in the correct orientation.
    MacOS and Windows both give the user control over all the displays connected to a given system, so driving a portrait and a landscape monitor simultaneously shouldn't be a problem from an OS/hardware standpoint.
    Is this something that can be rolled into LR4?
    Respectfully,
    Andre

    I use 3 or 4 monitors too, so that's one I'd like to see too.  We wouldn't want the request to get lost in beta land, so might I suggest adding the request to the Feature Request forum http://feedback.photoshop.com/photoshop_family where it can easily be tracked?  If you post the link to your request here, others can also vote on your request. 

  • I have contacted apple for more than 5 times, but no reply

    Hi , i have renewed my iphone developer program for 99$ , But i used to get the message that "my account is expired please renew it" , later now my apps too disappeared in appstore.I have contacted apple support for more than 5 times, but no reply.What is happening.Can some one please explain please.

    "Apple will fix all these problems during a week."
    Or not.
    There are many devs who still have NO access to ANY part of the developer website.
    Apple is aware of this (a dev support person telephoned me last week) but, so far, there is no fix or work-around.
    It may be true that the developer site has access for SOME subscribers; it is NOT true that everyone is able to get resources shown as "online" on the status page -- many of us have ZERO access.
    So, when Apple says 'this week' you have to balance that with the FACT that their assessment of the current status, ie. everyone has limited access now, is wrong/untruthful.
    Anyone who doubts this should simply look at other posts in this forum -- lots of folks can't get into the site -- just an infinite loop from login to grey linen maintenance page and back.

  • It's so annoying!! I have created a new Apple ID but after I click verify it just goes back to the previous page!!! It''s really frustrating I have tried for more than 4H, and the problem is not about the apple ID. I can download apps with the apple ID, w

    It's so annoying!! I have created a new Apple ID but after I click verify it just goes back to the previous page!!! It''s really frustrating I have tried for more than 4H, and the problem is not about the apple ID. I can download apps with the apple ID, which means IMessage is the problem! I restarted my iPad, I logged in and out of the apple ID in the store, AND YET IT STILL WON'T WORK, PLEASE HELP!

    Hi Vmanfromusa!
    It sounds like you are having an issue with activating your iMessage app on your iPad. An article outlining some troubleshooting steps for this issue can be found here:
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/ts4268
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • My iPhone 4 with iOS 6 is making me start to hate Apple. Any App and at any time I open and I can not view it or move for more than 2 minutes, they close themselves. During connections, it also gives this problem and the signal disappears after a few seco

    My iPhone 4 with iOS 6 is making me start to hate Apple. Any App and at any time I open and I can not view it or move for more than 2 minutes, they close themselves. During connections, it also gives this problem and the signal disappears after a few seconds back but often the person on the other end has hung up ... I can not stand it anymore, someone suggests something?
    Besides these problems, there is the battery, which was bad got worse, she is not lasting more than 10 hours, even without using the phone.
    Sometimes it even seems that the problem was solved, but my joy did not last long after I celebrate all the problems return, is incredible ...
    thanks.
    Sorry my bad Inglês.

    Try a reset hold home/sleep buttons until Apple logo appears
    If that does not improve try a restore
    http://support.apple.com/kb/HT4137
    For your information
    We are NOT Apple here we are all users helping other users
    so emotion is ignored

  • In the evaluation mode im nt able to view my ocr result for more than 2 seconds

    im doing my final year project on image processing using labview 2010(evaluation). im using a microsoft webcam(VX-700). my objective is character recognition using vision. im able to capture an image and store the same. the software also recognizes the characters after training the characters in vision assistance. but im not able to view the result string for more than 5 seconds. i really want to have some support regarding this issue. i've attached the program what i've used with this message. plz do help me with this issue asap.
    Attachments:
    OCR First Example with integrated2.vi ‏120 KB

    Rudegar,
    Our network is very stable and we aren't seeing any problems with anything else and besides, these worked fine until we did the update.
    The wifi access point is in the same room about 6-8 ft. away and it's kind of hard to connect an appletv by ethernet to an iPad. 
    The appletv runs fine using it's built in applications, like Netflix, Disney, Radio, etc.
    All of this makes me think it's not a wireless problem, but it's something in the appletv software after doing the update that won't hold the iPad connection.
    I appreciate your suggestions and will pass your information along to our network person.
    Any other ideas?
    Thanks

  • I just updated to iOS 6 and now whenever I'm in an app for more than 5 minutes the app will close and I can't get back in it for 10 minutes. Can anyone help? Please?

    Okay, so I just updated to the newest iOS 6 version on my iPod. And now I can't be in an app for more than 5 minutes without the app closing and I can't get back into the app for at least 10 minutes. Somebody, anybody please help me! This is getting really annoying!!! Please please please!

    See:
    iOS: Troubleshooting applications purchased from the App Store
    Contact the developer/go to their support site if only one app.
    Restore from backup. See:
    iOS: How to back up
    Restore to factory settings/new iPod

  • Help me to search on calendar for more than one year

    I desparately need to be able to search on calendar for more than one year., which was taken away on the new operating system.  I have kept personal memories of my husband on there in the notes sections on days when we did things. ( I have also kept all kinds of personal notes, like doctor records or conversations, in the notes of events/dates.) it is a huge loss for me not to be able to search my calendar for more than one year. Is there any way I can do this?

    Jens,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Visit http://support.novell.com and search the knowledgebase and/or check all
    the other self support options and support programs available.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://forums.novell.com)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://forums.novell.com/faq.php
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://forums.novell.com/

  • No home phone service for more than two months

    I am sending this note on behalf of my mother.  She has been waiting for technical services to her home phone for more than two months.  She has received dates where a technician would come out to repair her services in which she has left work early or stayed home on weekends no avail.  My mom is not in best health and has a child with disabilities living in the home and it is imperative that her services are working.  It is frustrating to her to pay for a service she's not receiving.  This is the worst customer service experience from Verizon.  
    I am asking for immediate resolve to this issue and to work with us to assure payment for time where phone has not worked Will not be charged to her account.  Please contact me {edited for privacy}.

    Hi lmatthews522,
    Please go to your profile page for the forum by clicking on your name, and look at the top of the middle column where you will find an area titled "My Private Support Cases". There you will find a link to the private board where you and the agent may exchange information. This should be checked on a frequent basis, as the agent may be waiting for information from you before they can proceed with any actions. Please keep all correspondence regarding your issue in the private support portal.

  • How can I see if my program is for more than one user? We think we have bought in design for more users, but can not find out how to get in for more than one?

    How can I see if my program is for more than one user? We think we have bought in design for more users, but can not find out how to get in for more than one?

    If you bought a CC for team, you can log in at http://adobe.com and insert the e-mail that you gave at the moment at the purchase and than you can manage and see you product/plan/team.
    If I was not clear you can use the following link to help you solving your issue:
    Creative Cloud Help | Manage your Creative Cloud for teams membership
    If your not clear about this situation, contact with an agent of Adobe, by chat or phone. Use the following link to see the type of support you have on this matter:
    http://adobe.com/getsupport
    I think this will help you.
    Regards

  • Add Suppporting Details for more than one periods at the same time for the same Account in Planning.

    As we know, in planning form, we can add supporting details to one cell for the level 0 members intersections.
    But can we do that as below:
    add supporting details for more than one cells at the same time?
    I tried to do that in workspace and smartview, neither is working.(my workspace version 11.1.2.2.300.20)
    I wonder if i am not with the right version, because i don't know how to get the below.
    Can any one explain?
    Thank you.

    Hi,
    I have tried in Smartview for a simple form where my period dimension was in columns and accounts in rows.
    You need to select multiple period and select supporting details, it will show those selected period for which you can add the supporting details.
    You can add these details and then submit the data in the form.
    Regards,
    Sourabh

  • HP LaserJet 1300 not connected for more than 1 day

    Since Apple came out with the Yosemite printing system, I cannot print wirelessly for more than one day. I have reset my modem, changed the location of my network, unplugged and repowered Airport Extreme, started in Safe Mode, and more.
    No matter what I do: I either get:  a printer name with a number in parenthese or a long Bonjour number when deleting and adding a printer on my laptop.
    Whatever I do, it only works from about 24 to 36 hours. Then when i go to print it says Printer is Not Connected. I can delete and add again, usually it will find the printer, add it, print, and then a day or two later, the printer is not connected again.
    But I have to keep redoing this both to my laptop and my wife's, and we have not had reliable printing since Yosemite cane out about October 18, 2014.
    Equipment
    iMac:
    Operating Sysem: 10.10.1
    Printer: HP LaserJet 1300
    Network: Comcast
    Router: Airport Extreme
    The only thing I have not done I can think of is reset Airport Extreme.  I can do that, but don't know if I will then have additional problems.
    This all started with the YIosemite update but at this point I don't know if it is an HP-related problem or a general Yosemite-related problem.
    I appreciate any help I can get. Have wasted probably 40 hours over two-plus months trying to get this fixed. When Apple could not fix it back in October, the person referred me to HP. The person at HP Business did not know my printer was supported for Yosemite although his own web site said it was. So that was not much help And after resetting printers, deleting and adding printers, etc., I don't know what else to do.
    Thanks for listening.

    Did it start not syncing after the iOS 4.2 update?

  • Am in the process of installing ios 7.0.4 for my ipad 2 however, all I see on the screen is the USB cable and an arrow which point to iTunes icon. It has remained so for more than 1 hour. When I put it off and switch it on again, I see the same thing

    Am in the process of installing ios 7.0.4 for my ipad 2 however, all I see on the screen is the USB cable and an arrow pointing to iTunes icon. It has remained so for more than 1 hour. When I put it off and switch it on again, I see the same thing appearing again. what sholud I do?

    This is the solution to your issue.
    I wish you the best of luck. 
    http://support.apple.com/kb/ht1808?locale=en_AU&viewlocale=en_AU

Maybe you are looking for

  • Background images are not rendering while they are in all other browsers.

    Firefox is having problems with certain .jpg images that I have uploaded to a hosting service. (Ex: http://img838.imageshack.us/img838/3991/hbbgardenorangepop3.jpg) When you set this image as your web page's background image, the image will not be re

  • Not able to Bonjour chat with macs on my network

    I'm trying to set up a bonjour chat system with my office building.  Most people are on Macs and are able to chat fine through iChat.  However a few people are on windows machines, and I cann't get their chat to work properly.  They're using Pidgin o

  • Implementing a dynamic dropdown list

    Hi All, I am implementing an Adaptive RFC model that uses two custom RFC's. First RFC returns a table that has list of countries and the second RFC returns a table that lists the states of a particular country. Now using these two RFC's how do I impl

  • Slow record selection in tableView component with large number of records

    Hi experts, we have a Business Server Page (flow logic) with several htmlb:inputField's. As known from SAP standard we would like to offer value helper (F4) to the users for the ease of record selection. We use the onValueHelp() method of the inputFi

  • Ibook dual usb can't reset PMU

    My computer won't turn on at all now. I've searched all the possible reset options, but my model doesn't have a reset button. Battery is in, power cord works and glows green at connection to computer. Help?