Supporting Multiple Registrars with CME
Hello,
I am attempting to utilize the "Multiple Registrars on SIP Trunks" IOS feature with my Call Manager Express.
http://www.cisco.com/en/US/docs/ios/voice/sip/configuration/guide/sip_cg-multi-registrars.html
I want to register to a BroadSoft via two different Edge Session Border Controllers.
I have configured the two registrars, but I have a problem when those registration methods go out. Since I am registering to a BroadSoft, I need the registering SIP URI to look like this:
REGISTER sip:test.domain:6034
From:[email protected]
This works fine when I use a single registration. But when I try to use multiple registrations I get:
REGISTER sip: 11.11.11.11:6034
From:[email protected]
Which the BroadSoft rejects because the SIP URI does not include “test.domain”
Has anyone else had any experience with multiple registrations with BroadSoft? Thanks in advance.
IOS 15.1(4)M4
sip-ua
no remote-party-id
retry invite 2
retry register 10
timers connect 100
registrar 1 ipv4:11.11.11.11:6034 expires 3600
registrar 2 ipv4:22.22.22.22:6035 expires 3600
sip-server dns:test.domain
voice service voip
dtmf-interworking rtp-nte
allow-connections sip to sip
no supplementary-service sip moved-temporarily
no supplementary-service sip refer
fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback none
sip
bind control source-interface Loopback2
bind media source-interface Loopback2
registrar server expires max 120 min 60
asserted-id pai
privacy pstn
localhost dns:ad.lab preferred
no update-callerid
midcall-signaling passthru
privacy-policy passthru
Hi Tod,
I think so, but I must say its very confusing for me.
You can check few threads regarding CUBE licensing..
https://supportforums.cisco.com/thread/2050989
https://supportforums.cisco.com/thread/2151012
https://supportforums.cisco.com/message/3076778#3076778
http://www.cisco.com/c/en/us/products/collateral/unified-communications/unified-border-element/product_data_sheet09186a00801da698.html
Thanks
Manish
Similar Messages
-
Supporting multiple companies with JES6
I have been trying to find instructions to support multiple companies using email, calendar, and IM on a single installation of JES6 (messaging, calendar, IM, delegated admin, independent convergence, etc). I have had no luck.
The sales pitch talks a great story about scalability, so I must be missing something. Sun Docs does not have Messaging Server 7.0 yet. The wiki that the product page sends you to is incomplete. I am not sure when Sun made the decision to not require complete documentation before a product is released, but I find that frustrating.
I see that I can add multiple domains in Delegated Administrator, but this does not create separate partition areas in Messaging Server. I believe that you need to separate each company's email and calendar so that conflicts in names don't happen.
Can someone direct me to a document or tell me how to do this? Please?workman99 wrote:
I have been trying to find instructions to support multiple companies using email, calendar, and IM on a single installation of JES6 (messaging, calendar, IM, delegated admin, independent convergence, etc). I have had no luck.Log into Delegated Administrator and create a new organisation for each of the companies you wish to support. This organisation will require a domain-name e.g. somecompany.com (hence the term "hosted domain"). The users in the company then log into Messaging/Calendar/Convergence with [email protected].
The sales pitch talks a great story about scalability, so I must be missing something. Hosted/Virtual domain functionality is in use by a number of companies to provide the very functionality you refer to.
Sun Docs does not have Messaging Server 7.0 yet. There is no intention to provide static PDF based docs for communication-suite-6 products (which include MS7.0) going forth.
The wiki that the product page sends you to is incomplete.How exactly is it incomplete? Where there are differences between MS6.3 and MS7.0 they are documented on the http://wikis.sun.com/display/CommSuite/ site.
I am not sure when Sun made the decision to not require complete documentation before a product is released, but I find that frustrating.Once again, what exactly is not complete. Sweeping statements aren't really constructive. The wiki format has provided the ability to provide much quicker updates and enhancements to the documentation then was previously possible with the publish-once PDF guide mechanism.
I see that I can add multiple domains in Delegated Administrator, but this does not create separate partition areas in Messaging Server. I believe that you need to separate each company's email and calendar so that conflicts in names don't happen. You don't require separate partitions as Messaging Server and Calendar Server both use the hosted domain information in their storage e.g.
bash-3.00# ./mboxutil -lxp user/[email protected]/INBOX
msgs Kbytes last msg partition quotaroot mailbox path and acl
3 240 2008/04/03 07:28 primary 5120 user/[email protected]/INBOX /opt/SUNWmsgsr/data/store/partition/primary/=user/b7/e4/=testuser@hosted%dsun%dcom [email protected] lrswipcda
bash-3.00# ./mboxutil -lxp user/shjorth/INBOX
msgs Kbytes last msg partition quotaroot mailbox path and acl
6 37 2008/09/12 13:08 primary 5120 user/shjorth/INBOX /opt/SUNWmsgsr/data/store/partition/primary/=user/c4/31/=shjorth shjorth lrswipcdaSo in the above example "testuser" is in the hosted.sun.com hosted domain and "shjorth" is in the aus.sun.com default domain. The default domain does not have the domain information appended in the path and is treated as a special case.
bash-3.00# ./cscal list [email protected]
[email protected]: [email protected] status=enabled
bash-3.00# ./cscal list [email protected]
[email protected]: [email protected] status=enabledFor calendar server, the domain of the user is appended to the UID thus providing for separate UID name-spaces for each hosted-domain organisation.
Regards,
Shane. -
Cisco 2811 - Multiple SIP with CME 8.6
PLAN:
Configure two SIP providers with my Cisco ISR 2811 using CME 8.6
sip.fongo.com
sip.voicediscount.com
All incoming and local outgoing calls using fongo, while long distance & international via voipdiscount.
I have successfully got fongo.com service to work for both incoming and outgoing, however when I try a long distance & international calls I get a busy tone.
Any help will be appreciated since I've had no luck
CONFIG:
BNET01C2811-TOR1807#sh run
Building configuration...
Current configuration : 19512 bytes
! Last configuration change at 21:48:40 EDT Sat Oct 27 2012 by garrett
! NVRAM config last updated at 21:50:55 EDT Sat Oct 27 2012 by garrett
! NVRAM config last updated at 21:50:55 EDT Sat Oct 27 2012 by garrett
version 15.1
no service pad
service tcp-keepalives-in
service tcp-keepalives-out
service timestamps debug datetime msec localtime show-timezone
service timestamps log datetime msec localtime show-timezone
service password-encryption
service sequence-numbers
hostname BNET01C2811-TOR1807
boot-start-marker
boot system flash:c2800nm-adventerprisek9-mz.151-4.m5.bin
boot-end-marker
! card type command needed for slot/vwic-slot 0/0
security authentication failure rate 3 log
security passwords min-length 6
logging buffered 51200
logging console critical
enable secret 5 $1$r/t3$A3xgJf.ngqbUq.sDiNC4O0
no aaa new-model
clock timezone EST -4 0
clock summer-time EDT recurring
clock calendar-valid
dot11 syslog
no ip source-route
ip cef
no ip dhcp use vrf connected
ip dhcp excluded-address 10.15.0.0 10.15.0.20
ip dhcp pool TOR-1807WEBB
network 10.15.0.0 255.255.255.0
default-router 10.15.0.15
dns-server 64.71.255.198
option 150 ip 10.15.0.15
no ip bootp server
ip domain name bayross.net
ip name-server 64.71.255.198
ip ddns update method sdm_ddns1
HTTP
add http://bayross:******@members.dyndns.org/nic/update?system=dyndns&hostname=<h>&myip=<a>
remove http://bayross:********@members.dyndns.org/nic/update?system=dyndns&hostname=<h>&myip=<a>
interval maximum 1 1 0 0
interval minimum 1 1 0 0
no ipv6 cef
multilink bundle-name authenticated
parameter-map type protocol-info yahoo-servers
server name scs.msg.yahoo.com
server name scsa.msg.yahoo.com
server name scsb.msg.yahoo.com
server name scsc.msg.yahoo.com
server name scsd.msg.yahoo.com
server name cs16.msg.dcn.yahoo.com
server name cs19.msg.dcn.yahoo.com
server name cs42.msg.dcn.yahoo.com
server name cs53.msg.dcn.yahoo.com
server name cs54.msg.dcn.yahoo.com
server name ads1.vip.scd.yahoo.com
server name radio1.launch.vip.dal.yahoo.com
server name in1.msg.vip.re2.yahoo.com
server name data1.my.vip.sc5.yahoo.com
server name address1.pim.vip.mud.yahoo.com
server name edit.messenger.yahoo.com
server name messenger.yahoo.com
server name http.pager.yahoo.com
server name privacy.yahoo.com
server name csa.yahoo.com
server name csb.yahoo.com
server name csc.yahoo.com
parameter-map type protocol-info aol-servers
server name login.oscar.aol.com
server name toc.oscar.aol.com
server name oam-d09a.blue.aol.com
parameter-map type protocol-info msn-servers
server name messenger.hotmail.com
server name gateway.messenger.hotmail.com
server name webmessenger.msn.com
voice service voip
ip address trusted list
ipv4 46.19.209.10
ipv4 46.19.209.11
ipv4 46.19.209.12
ipv4 46.19.209.13
ipv4 46.19.209.14
ipv4 46.19.209.15
ipv4 46.19.209.75
ipv4 46.19.209.76
ipv4 46.19.209.77
ipv4 46.19.209.78
ipv4 46.19.209.79
ipv4 46.19.209.80
ipv4 46.19.210.10
ipv4 46.19.210.11
ipv4 46.19.210.12
ipv4 46.19.210.13
ipv4 46.19.210.14
ipv4 46.19.210.15
ipv4 46.19.210.75
ipv4 46.19.210.76
ipv4 46.19.210.77
ipv4 46.19.210.78
ipv4 46.19.210.79
ipv4 46.19.210.80
ipv4 81.85.224.40
ipv4 81.85.224.41
ipv4 212.150.88.21
ipv4 212.150.88.23
ipv4 212.150.88.24
ipv4 208.65.240.165
ipv4 0.0.0.0 0.0.0.0
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
supplementary-service h450.12
redirect ip2ip
fax protocol pass-through g711ulaw
h323
no h225 timeout keepalive
voice class codec 1
codec preference 1 g711ulaw
codec preference 2 g711alaw
voice register global
mode cme
source-address 10.15.0.15 port 5060
max-dn 100
max-pool 25
tftp-path flash:
create profile sync 0002145265491175
camera
voice translation-rule 2
rule 1 /9905+/ /905/
rule 2 /9416+/ /416/
rule 3 /9647+/ /647/
voice translation-rule 4
rule 1 /91+/ /1/
voice translation-rule 5
rule 1 /9011+/ /011/
voice translation-rule 7
rule 1 /1011/ /16472473297/
voice translation-rule 911
rule 1 /111/ /6473385738/
voice translation-rule 2473297
rule 1 /16472473297/ /1011/
voice translation-profile Caller-ID
translate calling 7
voice translation-profile Emergency
translate called 911
voice translation-profile Incoming
translate called 2473297
voice translation-profile International
translate calling 7
translate called 5
voice translation-profile Local
translate calling 7
translate called 2
voice translation-profile LongDistance
translate calling 7
translate called 4
voice-card 0
dsp services dspfarm
crypto pki token default removal timeout 0
crypto pki trustpoint TP-self-signed-21053818
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-21053818
revocation-check none
rsakeypair TP-self-signed-21053818
crypto pki trustpoint test_trustpoint_config_created_for_sdm
subject-name [email protected]
revocation-check crl
crypto pki certificate chain TP-self-signed-21053818
certificate self-signed 01
30820227 30820190 A0030201 02020101 300D0609 2A864886 F70D0101 05050030
2F312D30 2B060355 04031324 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 32313035 33383138 301E170D 31323130 31373131 33303333
5A170D32 30303130 31303030 3030305A 302F312D 302B0603 55040313 24494F53
2D53656C 662D5369 676E6564 2D436572 74696669 63617465 2D323130 35333831
3830819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281 8100B080
AD5A9751 C15D5932 0677DBEF A59AF6B0 1EF55BE0 B1DFA4B8 397130B7 90BA221D
5A03F805 DD546B79 D40CD413 3FD7CCFC A2137323 63E26137 8577DD77 C1787B0E
ADC65091 042897A3 2F26DAC0 CCF0E0AC 604AA2B4 48616FE3 976E17B6 53ABC719
16EFA128 8F883BFA 39FA02EF CA820300 4B650412 77418E6D AE45C6A1 0FEB0203
010001A3 53305130 0F060355 1D130101 FF040530 030101FF 301F0603 551D2304
18301680 14504E01 C3E57E38 CAB8659D 21D57880 66FE3CDB 83301D06 03551D0E
04160414 504E01C3 E57E38CA B8659D21 D5788066 FE3CDB83 300D0609 2A864886
F70D0101 05050003 81810049 A534494C B6777D5B FCAB252E 8FD03C10 D917714E
3314139B 04FCB2CC 74C06091 D189470E 930CEA8A 393461A7 E505BB0A 59DEDF5C
37711F56 127E22C6 CA9457EC 960A868D 37B24F75 A03B1F8B A611D77F 0E79B2D8
135C57AF B9705B78 BA97BFF3 5967C1D1 6E2B92D3 A8BE055B 10A59F2C 5D28C55B
2164E3C7 7F2380E1 E33AD4
quit
crypto pki certificate chain test_trustpoint_config_created_for_sdm
license udi pid CISCO2811 sn FHK1041F27M
username garrett privilege 15 password 7 070D000000094C50
redundancy
ip tcp synwait-time 10
no ip ftp passive
class-map type inspect match-any SDM_BOOTPC
match access-group name SDM_BOOTPC
class-map type inspect match-any ccp-cls-protocol-p2p
match protocol edonkey signature
match protocol gnutella signature
match protocol kazaa2 signature
match protocol fasttrack signature
match protocol bittorrent signature
class-map type inspect match-any SDM_DHCP_CLIENT_PT
match class-map SDM_BOOTPC
class-map type inspect match-any ccp-skinny-inspect
match protocol skinny
class-map type inspect match-any sdm-cls-bootps
match protocol bootps
class-map type inspect match-any ccp-cls-insp-traffic
match protocol dns
match protocol ftp
match protocol https
match protocol icmp
match protocol imap
match protocol pop3
match protocol netshow
match protocol shell
match protocol realmedia
match protocol rtsp
match protocol smtp
match protocol sql-net
match protocol streamworks
match protocol tftp
match protocol vdolive
match protocol tcp
match protocol udp
class-map type inspect match-all ccp-insp-traffic
match class-map ccp-cls-insp-traffic
class-map match-any CCP-Transactional-1
match dscp af21
match dscp af22
match dscp af23
class-map type inspect match-any ccp-h323nxg-inspect
match protocol h323-nxg
class-map type inspect match-any ccp-cls-icmp-access
match protocol icmp
match protocol tcp
match protocol udp
class-map type inspect match-any ccp-cls-protocol-im
match protocol ymsgr yahoo-servers
match protocol msnmsgr msn-servers
match protocol aol aol-servers
class-map match-any CCP-Voice-1
match dscp ef
class-map type inspect match-any ccp-h225ras-inspect
match protocol h225ras
class-map match-any CCP-Routing-1
match dscp cs6
class-map match-any CCP-Signaling-1
match dscp cs3
match dscp af31
class-map type inspect match-any ccp-h323annexe-inspect
match protocol h323-annexe
class-map match-any CCP-Management-1
match dscp cs2
class-map type inspect match-any ccp-h323-inspect
match protocol h323
class-map type inspect match-all ccp-icmp-access
match class-map ccp-cls-icmp-access
class-map type inspect match-all ccp-invalid-src
match access-group 100
class-map type inspect match-any ccp-sip-inspect
match protocol sip
class-map type inspect match-all ccp-protocol-http
match protocol http
policy-map CCP-QoS-Policy-1
class CCP-Voice-1
priority percent 33
class CCP-Signaling-1
bandwidth percent 5
class CCP-Routing-1
bandwidth percent 5
class CCP-Management-1
bandwidth percent 5
class CCP-Transactional-1
bandwidth percent 5
class class-default
fair-queue
random-detect
policy-map type inspect ccp-permit-icmpreply
class type inspect sdm-cls-bootps
pass
class type inspect ccp-sip-inspect
pass
class type inspect ccp-h323-inspect
inspect
class type inspect ccp-h323annexe-inspect
inspect
class type inspect ccp-h225ras-inspect
inspect
class type inspect ccp-h323nxg-inspect
inspect
class type inspect ccp-skinny-inspect
inspect
class type inspect ccp-icmp-access
inspect
class class-default
pass
policy-map sdm-qos-test-123
class class-default
policy-map type inspect ccp-inspect
class type inspect ccp-invalid-src
drop log
class type inspect ccp-protocol-http
inspect
class type inspect ccp-insp-traffic
inspect
class type inspect ccp-sip-inspect
pass
class type inspect ccp-h323-inspect
inspect
class type inspect ccp-h323annexe-inspect
inspect
class type inspect ccp-h225ras-inspect
inspect
class type inspect ccp-h323nxg-inspect
inspect
class type inspect ccp-skinny-inspect
inspect
class class-default
drop
policy-map type inspect ccp-permit
class type inspect SDM_DHCP_CLIENT_PT
pass
class type inspect ccp-sip-inspect
pass
class type inspect ccp-h323-inspect
inspect
class type inspect ccp-h323annexe-inspect
inspect
class type inspect ccp-h225ras-inspect
inspect
class type inspect ccp-h323nxg-inspect
inspect
class type inspect ccp-skinny-inspect
inspect
class class-default
drop
zone security in-zone
zone security out-zone
zone-pair security ccp-zp-out-self source out-zone destination self
service-policy type inspect ccp-permit
zone-pair security ccp-zp-in-out source in-zone destination out-zone
service-policy type inspect ccp-inspect
zone-pair security ccp-zp-self-out source self destination out-zone
service-policy type inspect ccp-permit-icmpreply
interface Null0
no ip unreachables
interface FastEthernet0/0
description $ES_LAN$$FW_INSIDE$
ip address 10.15.0.15 255.255.255.0
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
ip nat inside
ip virtual-reassembly in
zone-member security in-zone
duplex full
speed auto
no mop enabled
interface FastEthernet0/1
description $FW_OUTSIDE$$ETH-WAN$
ip dhcp client update dns server none
ip ddns update sdm_ddns1
ip address dhcp client-id FastEthernet0/1 hostname bayross.net
no ip redirects
no ip unreachables
no ip proxy-arp
ip nbar protocol-discovery
ip flow ingress
ip flow egress
ip nat outside
ip virtual-reassembly in
zone-member security out-zone
duplex auto
speed auto
no mop enabled
service-policy output CCP-QoS-Policy-1
interface FastEthernet0/2/0
no ip address
shutdown
interface FastEthernet0/2/1
no ip address
shutdown
interface FastEthernet0/2/2
no ip address
shutdown
interface FastEthernet0/2/3
no ip address
shutdown
interface Vlan1
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow ingress
shutdown
ip forward-protocol nd
ip http server
ip http access-class 2
ip http authentication local
ip http secure-server
ip http path flash:
ip flow-top-talkers
top 10
sort-by bytes
cache-timeout 60000
ip nat inside source list 1 interface FastEthernet0/1 overload
ip access-list extended SDM_BOOTPC
remark CCP_ACL Category=0
permit udp any any eq bootpc
logging trap debugging
access-list 1 remark INSIDE_IF=FastEthernet0/0
access-list 1 remark SDM_ACL Category=2
access-list 1 permit 10.15.0.0 0.0.0.255
access-list 2 remark HTTP Access-class list
access-list 2 remark CCP_ACL Category=1
access-list 2 permit 10.15.0.0 0.0.0.255
access-list 2 deny any
access-list 100 remark CCP_ACL Category=128
access-list 100 permit ip host 255.255.255.255 any
access-list 100 permit ip 127.0.0.0 0.255.255.255 any
no cdp run
tftp-server flash:term41.default.loads alias term41.default.loads
tftp-server flash:term61.default.loads alias term61.default.loads
tftp-server flash:Analog1.raw
tftp-server flash:Analog2.raw
tftp-server flash:AreYouThere.raw
tftp-server flash:AreYouThereF.raw
tftp-server flash:Bass.raw
tftp-server flash:CallBack.raw
tftp-server flash:Chime.raw
tftp-server flash:Classic1.raw
tftp-server flash:Classic2.raw
tftp-server flash:ClockShop.raw
tftp-server flash:DistinctiveRingList.xml
tftp-server flash:Drums1.raw
tftp-server flash:Drums2.raw
tftp-server flash:FilmScore.raw
tftp-server flash:HarpSynth.raw
tftp-server flash:Jamaica.raw
tftp-server flash:KotoEffect.raw
tftp-server flash:MusicBox.raw
tftp-server flash:Piano1.raw
tftp-server flash:Piano2.raw
tftp-server flash:Pop.raw
tftp-server flash:Pulse1.raw
tftp-server flash:Ring1.raw
tftp-server flash:Ring2.raw
tftp-server flash:Ring3.raw
tftp-server flash:Ring4.raw
tftp-server flash:Ring5.raw
tftp-server flash:Ring6.raw
tftp-server flash:Ring7.raw
tftp-server flash:RingList.xml
tftp-server flash:Sax1.raw
tftp-server flash:Sax2.raw
tftp-server flash:Vibe.raw
tftp-server flash:P00308010200.bin alias P00308010200.bin
control-plane
voice-port 0/1/0
voice-port 0/1/1
voice-port 0/1/2
voice-port 0/1/3
voice-port 0/3/0
caller-id enable
voice-port 0/3/1
caller-id enable
mgcp profile default
sccp local FastEthernet0/0
sccp ccm 10.15.0.15 identifier 1 version 4.0
sccp
sccp ccm group 1
associate ccm 1 priority 1
associate profile 2 register confprof2
dspfarm profile 1 transcode
codec g711ulaw
codec g711alaw
codec g729ar8
codec g729abr8
maximum sessions 20
shutdown
dspfarm profile 2 conference
codec g711ulaw
codec g711alaw
maximum sessions 5
associate application SCCP
dial-peer cor custom
name Main1_10Digit
name Main1_11Digit
dial-peer cor list Main1-11Digit
member Main1_11Digit
dial-peer cor list Main1-Line
member Main1_10Digit
member Main1_11Digit
dial-peer voice 1 voip
description ## INCOMING - DIDWW - 16472584731 ##
session protocol sipv2
session target sip-server
session transport udp
incoming called-number 16472584731
dtmf-relay rtp-nte
codec g711ulaw
no vad
dial-peer voice 2003 pots
description #### INCOMING INTERFACE 0/3/1 ####
destination-pattern 16472584731
incoming called-number 16472584731
port 0/3/1
dial-peer voice 1000 pots
description #### KITCHEN ####
destination-pattern 1000
port 0/3/0
dial-peer voice 1003 pots
description #### MASTER BEDROOM ####
destination-pattern 1003
port 0/3/1
dial-peer voice 10 voip
corlist outgoing Main1-11Digit
description Main1 11-Digit Outgoing
translation-profile outgoing LongDistance
destination-pattern 91..........
session protocol sipv2
session target dns:sip.voipdiscount.com
session transport udp
dtmf-relay rtp-nte sip-notify
codec g711ulaw
no vad
dial-peer voice 11 voip
corlist outgoing Main1-Line
translation-profile incoming Incoming
translation-profile outgoing Local
destination-pattern 9[^1]..[2-9]......
session protocol sipv2
session target dns:sip.fongo.com
incoming called-number .
dtmf-relay rtp-nte
codec g711ulaw
no vad
dial-peer voice 12 voip
translation-profile outgoing International
destination-pattern 9011T
session protocol sipv2
session target dns:sip.voipdiscount.com
dtmf-relay rtp-nte
codec g711ulaw
no vad
dial-peer voice 911 voip
translation-profile outgoing Emergency
destination-pattern 111
session protocol sipv2
session target dns:sip.fongo.com
dtmf-relay rtp-nte
codec g711ulaw
no vad
gateway
timer receive-rtp 1200
sip-ua
credentials username 37373737373 password 7 00000000000000000000 realm sip.fongo.com
credentials username username password 7 00000000000000000000 realm sip.voipdiscount.com
authentication username username password 7 0000000000000000000000000 realm sip.voipdiscount.com
no remote-party-id
srv version 1
retry invite 3
retry register 10
timers register 150
registrar 1 dns:sip.voipdiscount.com expires 3600
registrar 2 dns:sip.fongo.com expires 3600
sip-server dns:sip.voipdiscount.com
host-registrar
telephony-service
sdspfarm units 1
sdspfarm transcode sessions 5
sdspfarm tag 1 confprof2
conference hardware
no auto-reg-ephone
max-ephones 25
max-dn 100
ip source-address 10.15.0.15 port 2000
system message Bayross Residence
cnf-file location flash:
user-locale US load CME-locale-en_US-English-7.0.1.1.tar
load 7960-7940 P00308010200.loads
load 7941 SCCP41.9-1-1SR1S.loads
load 7941GE SCCP41.9-1-1SR1S.loads
load 7961 SCCP41.9-1-1SR1S.loads
load 7961GE SCCP41.9-1-1SR1S.loads
time-zone 12
max-conferences 8 gain -6
moh flash:/music-on-hold.au
web admin system name garrett secret 5 $1$MjiP$KMQoyqL/3mnftN0OLqs8b1
time-webedit
transfer-system full-consult
secondary-dialtone 9
create cnf-files version-stamp 7960 Oct 26 2012 19:53:22
ephone-dn 2 octo-line
number A001
conference ad-hoc
preference 3
ephone-dn 3 octo-line
number A002
conference ad-hoc
preference 3
ephone-dn 4 octo-line
number A003
conference ad-hoc
preference 3
ephone-dn 5 octo-line
number A004
conference ad-hoc
preference 3
ephone-dn 6 octo-line
number A005
conference ad-hoc
preference 3
ephone-dn 11 dual-line
number 1011 secondary 16472473297 no-reg both
corlist incoming Main1-Line
ephone-dn 12 dual-line
number 1012
label Garrett Bayross
name Garrett Bayross
corlist incoming Main1-Line
ephone 1
no multicast-moh
device-security-mode none
mac-address F04D.A28C.CBAC
mtp
type CIPC
button 1:11
ephone 2
device-security-mode none
mac-address 0016.4697.A472
type 7940
button 1:12
banner login ^CBayross.NET Network
^C
banner motd ^C
line con 0
logging synchronous
line aux 0
line vty 0 4
login local
transport input all
transport output all
scheduler allocate 20000 1000
ntp update-calendar
ntp server 128.100.100.128 prefer source FastEthernet0/1
endDEBUG OUTPUT:
login as: garrett
Bayross.NET Network
Using keyboard-interactive authentication.
Password:
------------- LEGAL NOTICE ----------------
-- THIS IS A PRIVATE SYSTEM --
-- UNAUTHORIZED ACCESS IS PROHIBITED --
-- CECI EST UN SYSTEME PRIVE --
-- TOUT ACCES NON AUTORISE EST INTERDIT --
BNET01C2811-TOR1807#deb
BNET01C2811-TOR1807#debug ccsip all
This may severely impact system performance. Continue? [confirm]
All SIP Call tracing is enabled
BNET01C2811-TOR1807#term mon
BNET01C2811-TOR1807#REGISTER sip:sip.voipdiscount.com:5060 SIP/2.0
Via: SIP/2.0/UDP 99.230.172.76:5060;branch=z9hG4bKED020B5
From: [email protected]>;tag=59BB550-3A6
To: [email protected]>
Date: Sun, 28 Oct 2012 00:51:43 GMT
Call-ID: C977B084-1FCE11E2-81A4A3AB-85AB6D24
User-Agent: Cisco-SIPGateway/IOS-12.x
Max-Forwards: 70
Timestamp: 1351385503
CSeq: 5 REGISTER
Contact:
Expires: 3600
Supported: path
Content-Length: 0
1859402: Oct 27 21:51:47.834 EDT: //-1/xxxxxxxxxxxx/SIP/Info/sipSPISetDateHeader: Converting TimeZone EDT to SIP default timezone = GMT
1859403: Oct 27 21:51:47.834 EDT: //3542/000000000000/SIP/Info/sipSPISendRegister: Associated container=0x4E3C18B0 to Register
1859404: Oct 27 21:51:47.834 EDT: //3542/000000000000/SIP/Transport/sipSPISendRegister: Sending REGISTER to the transport layer
1859405: Oct 27 21:51:47.834 EDT: //3542/000000000000/SIP/Transport/sipSPIGetSwitchTransportFlag: Return the Global configuration, Switch Transport is FALSE
1859406: Oct 27 21:51:47.834 EDT: //3542/000000000000/SIP/Transport/sipSPITransportSendMessage: msg=0x4CCD8DC8, addr=77.72.169.134, port=5060, sentBy_port=0, local_addr=, is_req=1, transport=1, switch=0, callBack=0x0
1859407: Oct 27 21:51:47.834 EDT: //3542/000000000000/SIP/Transport/sipSPITransportSendMessage: Proceedable for sending msg immediately
1859408: Oct 27 21:51:47.834 EDT: //3542/000000000000/SIP/Transport/sipTransportLogicSendMsg: switch transport is 0
1859409: Oct 27 21:51:47.834 EDT: //-1/xxxxxxxxxxxx/SIP/Transport/sipConnectionManagerGetConnection: connection required for raddr:77.72.169.134, rport:5060 with laddr:
1859410: Oct 27 21:51:47.834 EDT: //3542/000000000000/SIP/Transport/sipTransportLogicSendMsg: Set to send the msg=0x4CCD8DC8
1859411: Oct 27 21:51:47.834 EDT: //-1/xxxxxxxxxxxx/SIP/Transport/sipTransportPostSendMessage: Posting send for msg=0x4CCD8DC8, addr=77.72.169.134, port=5060, local_addr=, connId=4 for UDP
1859412: Oct 27 21:51:47.838 EDT: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
REGISTER sip:sip.voipdiscount.com:5060 SIP/2.0
Via: SIP/2.0/UDP 99.230.172.76:5060;branch=z9hG4bKED020B5
From: [email protected]>;tag=59BB550-3A6
To: [email protected]>
Date: Sun, 28 Oct 2012 00:51:47 GMT
Call-ID: C977B084-1FCE11E2-81A4A3AB-85AB6D24
User-Agent: Cisco-SIPGateway/IOS-12.x
Max-Forwards: 70
Timestamp: 1351385507
CSeq: 5 REGISTER
Contact:
Expires: 3600
Supported: path
Content-Length: 0
1859413: Oct 27 21:51:51.834 EDT: //-1/xxxxxxxxxxxx/SIP/Info/sipSPISetDateHeader: Converting TimeZone EDT to SIP default timezone = GMT
1859414: Oct 27 21:51:51.834 EDT: //3542/000000000000/SIP/Info/sipSPISendRegister: Associated container=0x4E3C18B0 to Register
1859415: Oct 27 21:51:51.834 EDT: //3542/000000000000/SIP/Transport/sipSPISendRegister: Sending REGISTER to the transport layer
1859416: Oct 27 21:51:51.834 EDT: //3542/000000000000/SIP/Transport/sipSPIGetSwitchTransportFlag: Return the Global configuration, Switch Transport is FALSE
1859417: Oct 27 21:51:51.834 EDT: //3542/000000000000/SIP/Transport/sipSPITransportSendMessage: msg=0x4CCD8DC8, addr=77.72.169.134, port=5060, sentBy_port=0, local_addr=, is_req=1, transport=1, switch=0, callBack=0x0
1859418: Oct 27 21:51:51.834 EDT: //3542/000000000000/SIP/Transport/sipSPITransportSendMessage: Proceedable for sending msg immediately
1859419: Oct 27 21:51:51.838 EDT: //3542/000000000000/SIP/Transport/sipTransportLogicSendMsg: switch transport is 0
1859420: Oct 27 21:51:51.838 EDT: //-1/xxxxxxxxxxxx/SIP/Transport/sipConnectionManagerGetConnection: connection required for raddr:77.72.169.134, rport:5060 with laddr:
1859421: Oct 27 21:51:51.838 EDT: //3542/000000000000/SIP/Transport/sipTransportLogicSendMsg: Set to send the msg=0x4CCD8DC8
1859422: Oct 27 21:51:51.838 EDT: //-1/xxxxxxxxxxxx/SIP/Transport/sipTransportPostSendMessage: Posting send for msg=0x4CCD8DC8, addr=77.72.169.134, port=5060, local_addr=, connId=4 for UDP
1859423: Oct 27 21:51:51.842 EDT: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
REGISTER sip:sip.voipdiscount.com:5060 SIP/2.0
Via: SIP/2.0/UDP 99.230.172.76:5060;branch=z9hG4bKED020B5
From: [email protected]>;tag=59BB550-3A6
To: [email protected]>
Date: Sun, 28 Oct 2012 00:51:51 GMT
Call-ID: C977B084-1FCE11E2-81A4A3AB-85AB6D24
User-Agent: Cisco-SIPGateway/IOS-12.x
Max-Forwards: 70
Timestamp: 1351385511
CSeq: 5 REGISTER
Contact:
Expires: 3600
Supported: path
Content-Length: 0
1859424: Oct 27 21:51:55.834 EDT: //-1/xxxxxxxxxxxx/SIP/Info/sipSPISetDateHeader: Converting TimeZone EDT to SIP default timezone = GMT
1859425: Oct 27 21:51:55.834 EDT: //3542/000000000000/SIP/Info/sipSPISendRegister: Associated container=0x4E3C18B0 to Register
1859426: Oct 27 21:51:55.834 EDT: //3542/000000000000/SIP/Transport/sipSPISendRegister: Sending REGISTER to the transport layer
1859427: Oct 27 21:51:55.834 EDT: //3542/000000000000/SIP/Transport/sipSPIGetSwitchTransportFlag: Return the Global configuration, Switch Transport is FALSE
1859428: Oct 27 21:51:55.834 EDT: //3542/000000000000/SIP/Transport/sipSPITransportSendMessage: msg=0x4CCD8DC8, addr=77.72.169.134, port=5060, sentBy_port=0, local_addr=, is_req=1, transport=1, switch=0, callBack=0x0
1859429: Oct 27 21:51:55.834 EDT: //3542/000000000000/SIP/Transport/sipSPITransportSendMessage: Proceedable for sending msg immediately
1859430: Oct 27 21:51:55.834 EDT: //3542/000000000000/SIP/Transport/sipTransportLogicSendMsg: switch transport is 0
1859431: Oct 27 21:51:55.834 EDT: //-1/xxxxxxxxxxxx/SIP/Transport/sipConnectionManagerGetConnection: connection required for raddr:77.72.169.134, rport:5060 with laddr:
1859432: Oct 27 21:51:55.834 EDT: //3542/000000000000/SIP/Transport/sipTransportLogicSendMsg: Set to send the msg=0x4CCD8DC8
1859433: Oct 27 21:51:55.834 EDT: //-1/xxxxxxxxxxxx/SIP/Transport/sipTransportPostSendMessage: Posting send for msg=0x4CCD8DC8, addr=77.72.169.134, port=5060, local_addr=, connId=4 for UDP
1859434: Oct 27 21:51:55.838 EDT: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
REGISTER sip:sip.voipdiscount.com:5060 SIP/2.0
Via: SIP/2.0/UDP 99.230.172.76:5060;branch=z9hG4bKED020B5
From: [email protected]>;tag=59BB550-3A6
To: [email protected]>
Date: Sun, 28 Oct 2012 00:51:55 GMT
Call-ID: C977B084-1FCE11E2-81A4A3AB-85AB6D24
User-Agent: Cisco-SIPGateway/IOS-12.x
Max-Forwards: 70
Timestamp: 1351385515
CSeq: 5 REGISTER
Contact:
Expires: 3600
Supported: path
Content-Length: 0
1859435: Oct 27 21:51:59.834 EDT: //-1/xxxxxxxxxxxx/SIP/Info/resolve_sig_ip_address_to_bind: calling reg_invoke_ip_first_hop()
1859436: Oct 27 21:51:59.834 EDT: //-1/xxxxxxxxxxxx/SIP/Info/resolve_sig_ip_address_to_bind: calling ip_best_local_address()
1859437: Oct 27 21:51:59.834 EDT: //-1/xxxxxxxxxxxx/SIP/Info/resolve_sig_ip_address_to_bind: return addr 99.230.172.76
1859438: Oct 27 21:51:59.834 EDT: //-1/xxxxxxxxxxxx/SIP/Info/resolve_sig_ip_address_to_bind: calling reg_invoke_ip_first_hop()
1859439: Oct 27 21:51:59.834 EDT: //-1/xxxxxxxxxxxx/SIP/Info/resolve_sig_ip_address_to_bind: calling ip_best_local_address()
1859440: Oct 27 21:51:59.834 EDT: //-1/xxxxxxxxxxxx/SIP/Info/resolve_sig_ip_address_to_bind: return addr 99.230.172.76
1859441: Oct 27 21:51:59.834 EDT: //-1/xxxxxxxxxxxx/SIP/Info/ccsip_spi_register_get_rcb: Getting New RCB [0x4C6D2730]
1859442: Oct 27 21:51:59.834 EDT: //-1/xxxxxxxxxxxx/SIP/Info/ccsipGetCCBFromRCB: Retrived CCB pointer [0x0]
1859443: Oct 27 21:51:59.834 EDT: //-1/xxxxxxxxxxxx/SIP/Info/ccsip_spi_register_free_rcb: Freeing rcb [0x4C6D1BAC]
1859444: Oct 27 21:51:59.834 EDT: //-1/xxxxxxxxxxxx/SIP/Info/ccsip_register_set_dns_resolved_address: CCSIP_REGISTER:: registrar 0 DNS resolved addr set to 77.72.169.131:5060
1859445: Oct 27 21:51:59.834 EDT: //-1/xxxxxxxxxxxx/SIP/Info/ccsipRegisterStartRCBTimer: Starting timer for pattern for 3600 seconds
1859446: Oct 27 21:51:59.834 EDT: //-1/xxxxxxxxxxxx/SIP/Info/sipSPISetDateHeader: Converting TimeZone EDT to SIP default timezone = GMT
1859447: Oct 27 21:51:59.838 EDT: //3542/000000000000/SIP/Info/sipSPISendRegister: Associated container=0x4E3C18B0 to Register
1859448: Oct 27 21:51:59.838 EDT: //3542/000000000000/SIP/Transport/sipSPISendRegister: Sending REGISTER to the transport layer
1859449: Oct 27 21:51:59.838 EDT: //3542/000000000000/SIP/Transport/sipSPIGetSwitchTransportFlag: Return the Global configuration, Switch Transport is FALSE
1859450: Oct 27 21:51:59.838 EDT: //3542/000000000000/SIP/Transport/sipSPITransportSendMessage: msg=0x4CCD8DC8, addr=77.72.169.131, port=5060, sentBy_port=0, local_addr=, is_req=1, transport=1, switch=0, callBack=0x41C25300
1859451: Oct 27 21:51:59.838 EDT: //3542/000000000000/SIP/Transport/sipSPITransportSendMessage: Proceedable for sending msg immediately
1859452: Oct 27 21:51:59.838 EDT: //3542/000000000000/SIP/Transport/sipTransportLogicSendMsg: switch transport is 0
1859453: Oct 27 21:51:59.838 EDT: //-1/xxxxxxxxxxxx/SIP/Transport/sipConnectionManagerGetConnection: connection required for raddr:77.72.169.131, rport:5060 with laddr:
1859454: Oct 27 21:51:59.838 EDT: //3542/000000000000/SIP/Transport/sipTransportLogicSendMsg: Set to send the msg=0x4CCD8DC8
1859455: Oct 27 21:51:59.838 EDT: //-1/xxxxxxxxxxxx/SIP/Transport/sipTransportPostSendMessage: Posting send for msg=0x4CCD8DC8, addr=77.72.169.131, port=5060, local_addr=, connId=2 for UDP
1859456: Oct 27 21:51:59.842 EDT: //3542/000000000000/SIP/State/sipSPIChangeState: 0x4B6533C0 : State change from (SIP_STATE_OUTGOING_REGISTER, SUBSTATE_NONE) to (SIP_STATE_OUTGOING_REGISTER, SUBSTATE_NONE)
1859457: Oct 27 21:51:59.846 EDT: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
REGISTER sip:sip.voipdiscount.com:5060 SIP/2.0
Via: SIP/2.0/UDP 99.230.172.76:5060;branch=z9hG4bKED020B5
From: [email protected]>;tag=59BB550-3A6
To: [email protected]>
Date: Sun, 28 Oct 2012 00:51:59 GMT
Call-ID: C977B084-1FCE11E2-81A4A3AB-85AB6D24
User-Agent: Cisco-SIPGateway/IOS-12.x
Max-Forwards: 70
Timestamp: 1351385519
CSeq: 5 REGISTER
Contact:
Expires: 3600
Supported: path
Content-Length: 0
1859458: Oct 27 21:51:59.990 EDT: //-1/xxxxxxxxxxxx/SIP/Info/sipSPISetDateHeader: Converting TimeZone EDT to SIP default timezone = GMT
1859459: Oct 27 21:51:59.990 EDT: //3542/000000000000/SIP/Info/sipSPISendRegister: Associated container=0x4E3C18B0 to Register
1859460: Oct 27 21:51:59.990 EDT: //3542/000000000000/SIP/Transport/sipSPISendRegister: Sending REGISTER to the transport layer
1859461: Oct 27 21:51:59.990 EDT: //3542/000000000000/SIP/Transport/sipSPIGetSwitchTransportFlag: Return the Global configuration, Switch Transport is FALSE
1859462: Oct 27 21:51:59.990 EDT: //3542/000000000000/SIP/Transport/sipSPITransportSendMessage: msg=0x4CCD8DC8, addr=77.72.169.131, port=5060, sentBy_port=0, local_addr=, is_req=1, transport=1, switch=0, callBack=0x0
1859463: Oct 27 21:51:59.990 EDT: //3542/000000000000/SIP/Transport/sipSPITransportSendMessage: Proceedable for sending msg immediately
1859464: Oct 27 21:51:59.990 EDT: //3542/000000000000/SIP/Transport/sipTransportLogicSendMsg: switch transport is 0
1859465: Oct 27 21:51:59.990 EDT: //-1/xxxxxxxxxxxx/SIP/Transport/sipConnectionManagerGetConnection: connection required for raddr:77.72.169.131, rport:5060 with laddr:
1859466: Oct 27 21:51:59.990 EDT: //3542/000000000000/SIP/Transport/sipTransportLogicSendMsg: Set to send the msg=0x4CCD8DC8
1859467: Oct 27 21:51:59.990 EDT: //-1/xxxxxxxxxxxx/SIP/Transport/sipTransportPostSendMessage: Posting send for msg=0x4CCD8DC8, addr=77.72.169.131, port=5060, local_addr=, connId=2 for UDP
1859468: Oct 27 21:51:59.994 EDT: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
REGISTER sip:sip.voipdiscount.com:5060 SIP/2.0
Via: SIP/2.0/UDP 99.230.172.76:5060;branch=z9hG4bKED020B5
From: [email protected]>;tag=59BB550-3A6
To: [email protected]>
Date: Sun, 28 Oct 2012 00:51:59 GMT
Call-ID: C977B084-1FCE11E2-81A4A3AB-85AB6D24
User-Agent: Cisco-SIPGateway/IOS-12.x
Max-Forwards: 70
Timestamp: 1351385519
CSeq: 5 REGISTER
Contact:
Expires: 3600
Supported: path
Content-Length: 0
1859469: Oct 27 21:52:00.290 EDT: //-1/xxxxxxxxxxxx/SIP/Info/sipSPISetDateHeader: Converting TimeZone EDT to SIP default timezone = GMT
1859470: Oct 27 21:52:00.290 EDT: //3542/000000000000/SIP/Info/sipSPISendRegister: Associated container=0x4E3C18B0 to Register
1859471: Oct 27 21:52:00.290 EDT: //3542/000000000000/SIP/Transport/sipSPISendRegister: Sending REGISTER to the transport layer
1859472: Oct 27 21:52:00.290 EDT: //3542/000000000000/SIP/Transport/sipSPIGetSwitchTransportFlag: Return the Global configuration, Switch Transport is FALSE
1859473: Oct 27 21:52:00.290 EDT: //3542/000000000000/SIP/Transport/sipSPITransportSendMessage: msg=0x4CCD8DC8, addr=77.72.169.131, port=5060, sentBy_port=0, local_addr=, is_req=1, transport=1, switch=0, callBack=0x0
1859474: Oct 27 21:52:00.290 EDT: //3542/000000000000/SIP/Transport/sipSPITransportSendMessage: Proceedable for sending msg immediately
1859475: Oct 27 21:52:00.294 EDT: //3542/000000000000/SIP/Transport/sipTransportLogicSendMsg: switch transport is 0
1859476: Oct 27 21:52:00.294 EDT: //-1/xxxxxxxxxxxx/SIP/Transport/sipConnectionManagerGetConnection: connection required for raddr:77.72.169.131, rport:5060 with laddr:
1859477: Oct 27 21:52:00.294 EDT: //3542/000000000000/SIP/Transport/sipTransportLogicSendMsg: Set to send the msg=0x4CCD8DC8
1859478: Oct 27 21:52:00.294 EDT: //-1/xxxxxxxxxxxx/SIP/Transport/sipTransportPostSendMessage: Posting send for msg=0x4CCD8DC8, addr=77.72.169.131, port=5060, local_addr=, connId=2 for UDP
1859479: Oct 27 21:52:00.294 EDT: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
REGISTER sip:sip.voipdiscount.com:5060 SIP/2.0
Via: SIP/2.0/UDP 99.230.172.76:5060;branch=z9hG4bKED020B5
From: [email protected]>;tag=59BB550-3A6
To: [email protected]>
Date: Sun, 28 Oct 2012 00:52:00 GMT
Call-ID: C977B084-1FCE11E2-81A4A3AB-85AB6D24
User-Agent: Cisco-SIPGateway/IOS-12.x
Max-Forwards: 70
Timestamp: 1351385520
CSeq: 5 REGISTER
Contact:
Expires: 3600
Supported: path
Content-Length: 0
1859480: Oct 27 21:52:00.891 EDT: //-1/xxxxxxxxxxxx/SIP/Info/sipSPISetDateHeader: Converting TimeZone EDT to SIP default timezone = GMT
1859481: Oct 27 21:52:00.891 EDT: //3542/000000000000/SIP/Info/sipSPISendRegister: Associated container=0x4E3C18B0 to Register
1859482: Oct 27 21:52:00.891 EDT: //3542/000000000000/SIP/Transport/sipSPISendRegister: Sending REGISTER to the transport layer
1859483: Oct 27 21:52:00.891 EDT: //3542/000000000000/SIP/Transport/sipSPIGetSwitchTransportFlag: Return the Global configuration, Switch Transport is FALSE
1859484: Oct 27 21:52:00.891 EDT: //3542/000000000000/SIP/Transport/sipSPITransportSendMessage: msg=0x4CCD8DC8, addr=77.72.169.131, port=5060, sentBy_port=0, local_addr=, is_req=1, transport=1, switch=0, callBack=0x0
1859485: Oct 27 21:52:00.891 EDT: //3542/000000000000/SIP/Transport/sipSPITransportSendMessage: Proceedable for sending msg immediately
1859486: Oct 27 21:52:00.891 EDT: //3542/000000000000/SIP/Transport/sipTransportLogicSendMsg: switch transport is 0
1859487: Oct 27 21:52:00.891 EDT: //-1/xxxxxxxxxxxx/SIP/Transport/sipConnectionManagerGetConnection: connection required for raddr:77.72.169.131, rport:5060 with laddr:
1859488: Oct 27 21:52:00.891 EDT: //3542/000000000000/SIP/Transport/sipTransportLogicSendMsg: Set to send the msg=0x4CCD8DC8
1859489: Oct 27 21:52:00.891 EDT: //-1/xxxxxxxxxxxx/SIP/Transport/sipTransportPostSendMessage: Posting send for msg=0x4CCD8DC8, addr=77.72.169.131, port=5060, local_addr=, connId=2 for UDP
1859490: Oct 27 21:52:00.899 EDT: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
REGISTER sip:sip.voipdiscount.com:5060 SIP/2.0
Via: SIP/2.0/UDP 99.230.172.76:5060;branch=z9hG4bKED020B5
From: [email protected]>;tag=59BB550-3A6
To: [email protected]>
Date: Sun, 28 Oct 2012 00:52:00 GMT
Call-ID: C977B084-1FCE11E2-81A4A3AB-85AB6D24
User-Agent: Cisco-SIPGateway/IOS-12.x
Max-Forwards: 70
Timestamp: 1351385520
CSeq: 5 REGISTER
Contact:
Expires: 3600
Supported: path
Content-Length: 0
1859491: Oct 27 21:52:02.091 EDT: //-1/xxxxxxxxxxxx/SIP/Info/sipSPISetDateHeader: Converting TimeZone EDT to SIP default timezone = GMT
1859492: Oct 27 21:52:02.091 EDT: //3542/000000000000/SIP/Info/sipSPISendRegister: Associated container=0x4E3C18B0 to Register
1859493: Oct 27 21:52:02.091 EDT: //3542/000000000000/SIP/Transport/sipSPISendRegister: Sending REGISTER to the transport layer
1859494: Oct 27 21:52:02.091 EDT: //3542/000000000000/SIP/Transport/sipSPIGetSwitchTransportFlag: Return the Global configuration, Switch Transport is FALSE
1859495: Oct 27 21:52:02.091 EDT: //3542/000000000000/SIP/Transport/sipSPITransportSendMessage: msg=0x4CCD8DC8, addr=77.72.169.131, port=5060, sentBy_port=0, local_addr=, is_req=1, transport=1, switch=0, callBack=0x0
1859496: Oct 27 21:52:02.091 EDT: //3542/000000000000/SIP/Transport/sipSPITransportSendMessage: Proceedable for sending msg immediately
1859497: Oct 27 21:52:02.091 EDT: //3542/000000000000/SIP/Transport/sipTransportLogicSendMsg: switch transport is 0
1859498: Oct 27 21:52:02.091 EDT: //-1/xxxxxxxxxxxx/SIP/Transport/sipConnectionManagerGetConnection: connection required for raddr:77.72.169.131, rport:5060 with laddr:
1859499: Oct 27 21:52:02.091 EDT: //3542/000000000000/SIP/Transport/sipTransportLogicSendMsg: Set to send the msg=0x4CCD8DC8
1859500: Oct 27 21:52:02.091 EDT: //-1/xxxxxxxxxxxx/SIP/Transport/sipTransportPostSendMessage: Posting send for msg=0x4CCD8DC8, addr=77.72.169.131, port=5060, local_addr=, connId=2 for UDP
1859501: Oct 27 21:52:02.099 EDT: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent:
REGISTER sip:sip.voipdiscount.com:5060 SIP/2.0
Via: SIP/2.0/UDP 99.230.172.76:5060;branch=z9hG4bKED020B5
From: [email protected]>;tag=59BB550-3A6
To: [email protected]>
Date: Sun, 28 Oct 2012 00:52:02 GMT
Call-ID: C977B084-1FCE11E2-81A4A3AB-85AB6D24
User-Agent: Cisco-SIPGateway/IOS-12.x
Max-Forwards: 70
Timestamp: 1351385522
CSeq: 5 REGISTER
Contact:
Expires: 3600
Supported: path
Content-Length: 0
1859502: Oct 27 21:52:04.491 EDT: //-1/xxxxxxxxxxxx/SIP/Info/sipSPISetDateHeader: Converting TimeZone EDT to SIP default timezone = GMT
1859503: Oct 27 21:52:04.491 EDT: //3542/000000000000/SIP/Info/sipSPISendRegister: Associated container=0x4E3C18B0 to Register
1859504: Oct 27 21:52:04.491 EDT: //3542/000000000000/SIP/Transport/sipSPISendRegister: Sending REGISTER to the transport layer
1859505: Oct 27 21:52:04.491 EDT: //3542/000000000000/SIP/Transport/sipSPIGetSwitchTransportFlag: Return the Global configuration, Switch Transport is FALSE
1859506: Oct 27 21:52:04.491 EDT: //3542/000000000000/SIP/Transport/sipSPITransportSendMessage: msg=0x4CCD8DC8, addr=77.72.169.131, port=5060, sentBy_port=0, local_addr=, is_req=1, transport=1, switch=0, callBack=0x0
1859507: Oct 27 21:52:04.491 EDT: //3542/000000000000/SIP/Transport/sipSPITransportSendMessage: Proceedable for sending msg immediately
1859508: Oct 27 21:52:04.491 EDT: //3542/000000000000/SIP/Transport/sipTransportLogicSendMsg: switch transport is 0
1859509: Oct 27 21:52:04.491 EDT: //-1/xxxxxxxxxxxx/SIP/Transport/sipConnectionManagerGetConnection: connection required for raddr:77.72.169.131, rport:5060 with laddr:
1859510: Oct 27 21:52:04.491 EDT: //3542/000000000000/SIP/Transport/sipTransportLogicSendMsg: Set to send the msg=0x4CCD8DC8
1859511: Oct 27 21:52:04.491 EDT: //-1/xxxxxxxxxxxx/SIP/Transport/sipTransportPostSendMessage: Posting send for msg=0x4CCD8DC8, addr=77.72.169.131, port=5060, local_addr=, connId=2 for UDP
1859512: Oct 27 21:52:04.495 EDT: //-1/xxxxxxxxxxxx/SIP/Msg/ccsipDisplayMsg:
Sent: -
How can I copy multiple slides with a HP Scanjet 4050 to photoes using Maverick? HP apparently no longer supports this product for OS Maverick.
VueScan
VueScan FAQ -
Hi Cisco experts,
My name is Kumagai and I need your expert opinions below.
I am trying to configure one VLAN1 support multiple network segments as below.
(this should be a very straight forward configuration and should be OK, I think ? )
interface Vlan1
ip address 172.30.0.0 255.255.128.0
ip address 172.30.31.253 255.255.254.0 secondary
ip address 172.30.61.253 255.255.254.0 secondary
ip address 172.30.71.253 255.255.254.0 secondary
ip address 172.30.4.253 255.255.255.0 secondary
The only issue that is eating me is the above network segments are using HSRP too
and I am not sure is this possible with a combination of VLAN1 supporting multiples which are
further supported with HSRP settings in Cisco environment.
!example of HSRP:
interface Vlan4
ip address 172.30.4.253 255.255.255.0
no ip redirects
standby 4 ip 172.30.4.254
standby 4 priority 105
standby 4 preempt
<<< what will happen if I add the HSRP configuration as below into the above VLAN1 with multiple Network segment ??)
I would like to summarize my "Combined" configurations as below but I need your expert opinions on
whether the configuration below is workable without any problem ??
Or it is a total flop because Cisco does not support the configuration below !!!
interface Vlan1
ip address 172.30.0.0 255.255.128.0
ip address 172.30.31.253 255.255.254.0 secondary
ip address 172.30.61.253 255.255.254.0 secondary
ip address 172.30.71.253 255.255.254.0 secondary
ip address 172.30.4.253 255.255.255.0 secondary
standby 30 ip 172.30.31.254
standby 30 priority 105
standby 30 preempt
standby 60 ip 172.30.61.254
standby 60 priority 105
standby 60 preempt
standby 70 ip 172.30.71.254
standby 70 priority 105
standby 70 preempt
standby 4 ip 172.30.4.254
standby 4 priority 105
standby 4 preempt
Thanking you in advance !!!!!Hi,
As far as i know we dont set the ip helper address on the radio interface. It should be on the L3 interface of corresposding VLANs i.e.
int vlan 20
ip helper-address 192.168.33.xxx
int vlan 60
ip helper-address 130.20.1.xxx
I'm assuming that your using SVI's (int Vlan 20 and int Vlan 60) rahter than physical interfaces. Also hope you have configured switch port as trunk where this AP is connected.
Modify the AP config as below since you are using data vlan as the native vlan
interface Dot11Radio0.20
encapsulation dot1Q 20 native
interface FastEthernet0.20
encapsulation dot1Q 20 native
Ideally your AP fastethernet configuration should looks like below and not sure how you missed this as this comes by default when you have multiple vlans for multiple ssids.
interface FastEthernet0.20
encapsulation dot1Q 20 native
no ip route-cache
bridge-group 20
no bridge-group 20 source-learning
bridge-group 20 spanning-disabled
interface FastEthernet0.60
encapsulation dot1Q 60
no ip route-cache
bridge-group 60
no bridge-group 60 source-learning
bridge-group 60 spanning-disabled
Hope this helps.
Regards
Najaf -
Can a single HID report descriptor support multiple touch screens with different sizes?
Hi Experts:
I have a question for specifying touch monitor sizes in the HID report descriptor:
Can ONE HID report descriptor support multiple touch monitors with different sizes ?
Thanks in advance
leoMy screen shot is from AA9, and I have seen that the UI for AAX is vastly different, but...
Choose Paper Source from Page Size should be the "one-touch" solution your looking for.
In my test, my Konica-Minolta Bizhub failed to detect the proper paper trays, but Acrobat correctly spooled the pages. -
Is QuickTime support Mp4 file with Multiple SPS(Sequence Paramter Set) ?
Hello EveryOne.
I am in much trouble... plz help me. Thanks
I have a Mp4 file with Multiple SPS(Sequence Parameter Set) and PPS(Picture Parameter Set.
When i play into latest QuickTime then only Audio come. Blank White screen come in case of Video..Means no Video..
i want to ask :
Is QuickTime support Multiple SPS Mp4 file ?
Thanks
Shakti Kapoor
Windows 2000You didn't answer probably the most important question: whether you're using hardware or software Mercury Playback Engine (MPE). However, since you've set Maximum Render Quality on, it's largely irrelevant.
When you're using hardware MPE or have the MRQ flag set for your export, rendering is performed with linear color. Linear color processing affects how color channels and alpha channels are composited--anything less than 100% opacity is subject to linear color processing. Check out this article for more information on linear color/linear light: Linear Light - Artbeats
Since it sounds like you're seeing the results you expect in the Program Monitor, but not export, I'll wager you're not using hardware MPE. Only by disabling the Maximum Render Quality flag on export will you be able to get results that match what you see in the Program Monitor (within reason, of course). The only way you could see the effects of linear color within Premiere would be to either use a qualified GPU that enables hardware MPE, or go into your Sequence Settings and check the "Maximum Render Quality" option and then render previews.
Please let me know if that helps resolve the issue, or at least provide a little insight into the problem. -
There are multiple users with the same display name
Hi,
We have a user and when she get an item assigned to her she sees the following alert:
"There are multiple users with the same display name USERNAME and at least one of them does not have read permissions to some of the files"
Now I looked in the database and when I run the following query with the username:
SELECT
[ProviderDisplayName]
,[DisplayName]
,[HasDisplayName]
,[Domain]
,[AccountName]
,[UniqueUserId]
,[LastSync]
FROM [Tfs_Configuration].[dbo].[tbl_Identity] where displayname like '%USERNAME%'
Then I get 2 same usernames back, How can I get rid of one of them ? When I access TFS trough the portal I only find 1 occurence of this user.
We use VS2013 and TFS2013 update 4
Best regardsHi DSW,
Thanks for your post.
In your query result, please check if these two users have the same Account Name. if they are two different Account Name in result, it indicate there’s two users have the same display name in your AD, please check that two users’ information in
your AD. We suggest change one user’s display name in AD.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
LDAP supporting multiple DNS domains
I have an environment with multiple DNS domains, and am configuring a Directory server (DS 6.3.1) to centralize various OS configuration maps including user authentication. None of the DNS domains have unique data, so I'd like to do something like storing all the real data in one suffix, then somehow have all clients look to that primary suffix. I am aware that the Solaris Native LDAP client wants to bind to a nisDomainObject that matches its DNS domain. I'm just having a hard time believing that I really need to manage all those individual suffixes when they don't have unique data requirements.
Take as an example the following domains to be supported: foo.example.com, bar.example.com, dev.example.com, qa.example.com, prd.example.com (no hosts are actually in "example.com", they are all in subdomains). Again, all share common configuration data, same user IDs, etc - no unique maps are required.
I created a suffix, "dc=example, dc=com", set it up with idsconfig. All is well there.
[A] My first thought is to bind all Solaris clients, regardless of their DNS domain, to the baseDN of "dc=example, dc=com" in order to avoid having a separate suffix for each DNS domain. I tried to do this using "-a defaultSearchPath=dc=example,dc=com" with ldapclient init, but it failed with an error indicating it wants to see the nisDomainObject of its real DNS domain.
The second though I had, which I don't believe is possible, is to find some sort of a LDAP equivalent of a symbolic link so that I could actually have an object for each DNS domain, but it would simply point back to "dc=example,dc=com". I can't find anything in the documentation which suggests this is possible, but I'd love to be wrong!
[C] Perhaps this could be somehow done with a rats nest of SSDs, but that really seems unwieldy, right? I plan on using a fair amount of the available objects, so it would be many SSDs per suffix. Yuck.
Can anyone comment on my above thoughts, or provide how they would go about supporting multiple DNS domains that have common configuration data?
Thank you,
ChrisOk, I answered my own question. Turns out it's pretty easy. Just use the "-a domainName=example.com" option with `ldapclient` then make sure that the FQDN of the LDAP server is available (or use its IP address). My problem was that the ldapclient overwriting nsswotch.conf was clobbering the SSL session because I used the FQDN which couldn't resolve.
This leaves an interesting condition of having the output of "domainname" not match the DNS domain. I'm testing now to see if this causes any unexpected issues with our environmnet, but I suspect it's not a problem. -
Bridge CS4 won't output to pdf multiple images with same filename
Hiya...my googling efforts have thus far failed!
I've got CS4, and in Bridge, I created a New Smart Collection to find all filenames in a folder containing "." or ".jpg" - which in turn searched through all the subfolders like what you used to be able to do in Photoshop CS3. Very simple stuff, but all the images are jpg's, but in multiple folders (I don't want to move them out of the folders, as the files came from an external source, and there are heaps of folders, and I don't want to pdf each subfolder seperately as it will take forever).
The problem is that some of the files have the same filenames (again I'd prefer not to rename, as it happens a lot on this project, and they are all over the place). So whilst Bridge will show the thumbnail images correctly in the content tabbed screen in my New Smart Collection, but once I've done the Output to PDF thing, for example, instead of showing both different images it has pdf only the first image but repeated it twice. And this happens multiple times throughout the pdf, the more times the same filename is used, the more times the first image gets repeated.
I know that it is messy to have multiple similar filenames, but why can't bridge just place the image anyway? It allocated a space for it on the pdf and does show it in bridge, it just doesn't seem to survive the transfer to pdf well.
The only other thing that I have done is use the below link (which was posted on another adobe forum thread) to create a custom pdf output template (nothing too fancy, just number of rows / columns, size, font etc). But I've tried using the standard bridge templates and it does the same thing.
http://www.proficiografik.com/2009/08/03/save-custom-pdf-output-template-in-adobe-bridge-c s4.html
Any help would be appreciated...even if to tell me that I am being unreasonable!
UPDATE 16/11/09
Just to let you know that I seem to have resolved the bug inadvertently with one of the Adobe updates. The below is the link for the AdobeOutputModule-2.1-mul-AdobeUpdate.zip which was released on 2/19/2009 - which allows for headers & footers to be placed in the Ouput pdf. I finally installed it today, and everything seems to be working fine now (i.e. I can pdf multiple images with the same filenames and the pdf will actually show each different image rather than repeating only 1 of the images).
Must have been a fix installed in the contact sheet templates that get installed with the update - not sure why the original version was corrupted, but I've left that with the Adobe guys (I submitted a bug report - and they were able to replicate the problem but hadn't fixed it as yet).
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4228
Message was edited by: djtun71 (16/11/09)When I click import from disc I am asked to choose a disc and then I get this message:
The following photos will not be imported because they are already present in the catalog. To see these photos in the catalog select 'Show in Library' (the import will be canceled).
This is followed by a long list of images. If I click 'Show in Library' I can see all the images with the same filename. And then they start to automatically write over those images with images from the disc. However they keep the same metadata and keywords from the previous images. If I click on Import and deselect the "don't reimport suspected duplicates" box, it imports only the images that don't share filenames and none of the images that do.
Is there a way of setting the "Don't reimport suspected duplicates" box in preferences? -
Cisco Jabber client to support Multiple e-mail domains
Hi All,
Per the following link, CUCM an IM&Presence starts supporting multiple domains at version 10:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/rel_notes/10_0_1/delta/CUCM_BK_C206A718_00_cucm-new-and-changed-1001/CUCM_BK_C206A718_00_cucm-new-and-changed-1001_chapter_010.html#CUCM_RF_I31EA3AB_00
However, we have heard from Cisco that there is NO Jabber client that works with version 10 to support multiple email domains.
This may or not may be true.
Can someone who has connection with BU confirm this? If there is Jabber client that supports multiple email domains, what is the version and when is it going to be available?
Thanks,
MustafaPer-Olov
How are you dealing with this DA restriction?
Also, what are your comments about the use of Domain Alias vs. Domain with inetdomainbaseDN pointing to my organization? Which one was your choice?
Thanks,
Ivo -
I am using Windows 7 Home Premium 64-bit OS.I've never had this problem before... today I opened iTunes and it prompted me to download the newest version. I use iTunes all the time and have updated it multiple times with no issues. During the installation process it gave me an error message that said:
Runtime error!
Program C:\Program Files\iTunes.exe
R0634
An application has made an attempt to load the C runtime library incorrectly.
Please contact the application's support team for more information.
I quit the installation, uninstalled iTunes and rebooted my computer. I now receive a similar message with a slight difference:
Runtime error!
Program C:\Program Files (x86)...
R0634
An application has made an attempt to load the C runtime library incorrectly.
Please contact the application's support team for more information.
I did not leave anything out from the error message. It doesn't point to a specific file, it just ends with "(x86)..." Every time I boot up my computer, this error message pops up on my desktop.
How do I repair this issue? I have found multiple suggested solutions but am unsure which one is the best, and I don't want to try a bunch of different things for fear I may make the problem worse. I would like to try and fix this myself if possible but I need to know if that is really possible or if I need to take my computer to someone for repairs. Any suggestions will be greatly appreciated!!Hi lustyln,
I'm having a little trouble understanding all of what you are trying to explain. From what I can tell, it sounds like your PC has a lot of software problems and you want to know what is supposed to be there and what isn't.
For reference, here are your product specifications:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01893242&lc=en&product=4043282
To get your PC software back to how it was when it was first purchased, run a system recovery:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01867418&lc=en&product=4043282
I hope this helps.
...an HP employee just trying to help where I can, but not speaking on behalf of HP. -
Can i have multiple monitor with my mac mini ?
Can i have multiple monitor with my mac mini like i do with my PC ? 2 differents screens.. not mirror.
There's lots of Mac Mini models since 2006 or so. What do you have?
Most support two monitors but how you do it is different depending on model.
Put this phrase into Google
dual monitors, mac mini
and you'll come up with the solution needed based on which MM you have. -
How do I share multiple contacts with another iPhone?
How do I share multiple contacts with another iPhone? Thanks in advance.
What do you mean share?
It is not possible to send contacts from one iPhone to another without installing an app that would support this. Bump is one such app.
There is no functionality in iOS to do this. iCloud can share contacts across multiple iDevices, but it would be ALL contacts, just just a few. -
Multiple registration with sip-ua
Hi,
someone know a way to do multiple registration with a single 2811 using sip-ua configuration with multiple accounts??
thnx
s.Hi, I have got to authenticate more than one account in the SIP provider with the hidden command "credentials" the problem that I have now is how to route all the calls done to the second account to the extension 101.
I want that incoming calls from 964812530 goes to extension 100 and incoming calls from 965072519 goes to extension 101
How can I do it?
I have tried this but it's not running:
sip-ua
credentials username 965072510 password 115849534F43415C557B7967 realm beta.awa
voz.com
authentication username 964812539 password 13544744535D4E7A7A757A70
no remote-party-id
retry invite 4
retry response 3
retry bye 2
retry cancel 2
retry register 5
timers register 250
registrar ipv4:213.162.201.146 expires 60
sip-server ipv4:213.162.201.146
voice service voip
sip
voice translation-rule 1
rule 1 /1../ /964812539/
voice translation-rule 3
rule 1 /964812539/ /100/
voice translation-rule 4
rule 1 /965072510/ /101/
voice translation-profile SIPout
translate calling 1
voice translation-profile incoming
translate called 3
voice translation-profile incoming2
translate called 4
voip-incoming translation-profile incoming
All the incoming calls are going to extension 100
regards
Maybe you are looking for
-
BPM: Send step bypassed at run time
Hi, In BPM, there is a send step after a transformation step in a block. In the corresponding interface mapping for the transformation step, the name of the .xsl mapping name is incorrect in spelling. Now due to this a strange situation is happening.
-
I'm getting this error and is there any way to resolve this without re-creating the service/s again, etc. Just curious if there are any suggestions/steps I may have missed, if not, I'll drop and recreate the services again Anyway, I have a backup of
-
Cannot find the maps stored in import manager during port creation
Hi All, I am unable to find any maps that i saved in import manager during port creation ,the maps are not showing in dropdown list during port creation in console.Do i need to store the maps that i have in import manager in specific place under mdm
-
CRVS2010 Beta - Help Wanted for VS2010 and CR!
I have been having a hard time getting CR to appear in the VS2010 Ultimate toolbox. I have set the target to Framework 4.0 and installed the CR4VS2010 program but the CR viewer is not showing. The problem is worsened by the fact that I am new to CR a
-
Revel plugin disabled in LR4.4
Attempts to enable fail with message: The plug-in's metadata was not fully updated. LrCatalog:withProlongedWriteAccessDo: could not execu'. It was blocked by another write access call, and no timeout parameters were provided. Windows 7 Lightroom 4.4