Supress Place call popup in CIC0

Hi all,
In Tcode CIC0,After selecting the Business partner ,after that click on place call,it will show a pop up with telephone no.s
I want to supress the Pop up when Business partner has more than one phone number.
Is there any BADI or Exits available to achieve this functionality.
Thanks

Hi Ashish,
that´s strange - because in our system it worked that way.
Since some months we do not use the transaction launcher for SAP GUI transactions at all.
We installed a consulting solution from innovate which allows to launch the real SAP GUI in the CRM webclient UI and to pass easily all parameters which are needed.
This has the advantages:
- much better performance as a launch transaction
- real SAP GUI is known by our users - the transaction launcher looks different (e.g. buttons)
- for some transactions there was missing functionality in the launch transaction which is there in SAP GUI
- No trouble with ZTransactions in SAP GUI
It was only one day efford to install this Add-on from innovate and to get the knowledge how to use it.
If you want to have more information i will give you the contact person at innovate gmbh.
Best regards
Manfred

Similar Messages

Jabber for Windows Call popup photo

We have a Jabber for windows deployment currently running in our lab environment. In the buddy list we have the contacts with their photo. When we start a call or receive a call a call popup screen appears. In this screen the photo of the called person i not displayed..
Is this possible? If i look at the pictures cisco provides there is always a photo of the caller.

Hi,
This is very common scenario in case the number to contact resolution does not work. You need to create directory lookup rules to modify the incoming number so that it matches the number configured for the contact in question.
Here's an example
You have a contract named John Doe with a DN configured in AD as 101. The contact has an avatar.
You get an incoming call from John Doe but the incoming number is 9101.
This will result in the avatar not being displayed for a contact because number 9101 does not match the contact's configured DN.
So in summary you need to use Directory Lookup Rules and/or Application Dial Rules
HTH,
Christos

My Phone Cannot Place Calls or Receive them

This is the Second Time this Problem has Happened. Each Time followed a Plane Trip from Detroit to Kansas City MO. The Phone Was Turned OFF while on the plane both times. I can Text and Receive DATA ONLY! Any call Place results with a message "The Number is Not in Service". I received a Text that when someone Calls My Phone they hear "All Circuits are Busy".
I DEPEND on This PHONE for My Business! I DO NOT HAVE TIME FOR THIS ISSUE TO KEEP HAPPENING!!!! The Verizon Techs CANNOT FIGURE IT OUT. They All want to Change the SIM Card. That was done the First Time (3 Weeks Ago) and Again When i Returned Home. At That Point I Could Place Calls, But No One Could HEAR ME! Come to find out, the phone had Switched to 4GLTE Only. If i had Less than That Coverage, My Phone Could Not Transmit My Voice!
I am at the End of my Patience With this PHONE. I had a Droid 4 and it was Fine (I Still Have It and am about to put it Back Into Service). I was talked Into this Piece of JUNK by a Pushy Verizon Twit in Toledo that would not Respond to me When I had Issues with the Turbo Set Up. I called her number when I had an issue and she Never Responded. I had to figure it out on my own and waste a bunch of time in doing so.
I Need RESULTS NOW, And What About this LOLIPOP 5.1 UPDATE I Keep Hearing About. Will That actually FIX This Thing or is it Just Another Verizon Buffer??!!
Back to the Original Issue; Is there a Problem with these phones Going Though X-RAY Machines At Airports?

Hello DanEvans442! I'm terribly sorry over any issues you've had with your Turbo. You and I have the same model. I love mine! One of the best devices have had in 10 years. I want that to be the same for you! You've mentioned that you've had issues after deboarding the plane. One of the things you'll want to be sure of is that the device isn't inadvertently in Airplane Mode. Please go to Settings> Airplane Mode. If it is set to "On", please turn it off and try your device again. If it was already set to off, then we can move to other possible contributors. Can you describe what happens when you try to use the service? DionM_VZW Follow us on Twitter www.twitter.com/vzwsupport

CUPC - "Phone Error. Could not place call because you have no audio device or sound card."

Periodically throughout the day, CUPC will not make or receive calls, but instead presents a dialog box with the message "Phone Error. Could not place call because you have no audio device or sound card." See attachment.
Signing out of and back into CUPC resolves the issue temporarily.
I have version 8.6.2 installed and I'm using a USB headset.
Does anyone know what might be causing this?

Hi Steve,
I have users reporting this as well with Jabra GN 2000 headsets. They claim using a different headset resolves it which I'm waiting to confirm but I was wondering if you were able to figure this out.
Thanks
Erik

Script Outbound. How introduce multiple numbers in a "Place call"?

Hi,
i'm trying to implement a script to make multiple outbound calls in a UCCX system but i don't know how can introduce several phones. The idea is simple but this step is critical:
1-take the first phone number and make the call.
2-take the secornd phone number and make the call.
3-.........
Thanks for help.
Regards

Antonio,
You can do this by taking the phone numbers from an XML document or from a database query (if you have premium license). You will need the place call step and make a loop around it, so when the first number is succesfully dialed, the script take the next number and so on. When using a XML you need to create one, for example:
<?xml version="1.0" encoding="ISO-8859-1"?>
088909220
088909221
Save it as Customer.xml (for example) and upload it to the UCCX repository (Documents in this case).
Creating the script:
Example variables (name, type, value)
xmlDoc, Document, DOC[Customer.xml]
suffixInt, int, 0
suffixString, String, ""
numberToCall, String, ""
Customer, String, ""
calledContact, Contact, null
The script should be something like this:
Gabriel

Problem with Place call in a script with HTTP trigger

Hi!
I'm trying to develop a sample script, associated to an application that has an HTTP trigger. I'm working with UCCX Premium 8.5.1
The trigger is working OK, but the place call output is allways "unsuccessful". The number to call and the redirect number are extensions of the same IPT platform.
Below you will find print-screen of the script. Besides, I'm attaching the .aef file.
Any help would be appreciated. Thanks in advance.
Roy.

The value in your "Call Control Group" must match the "Group ID" in your CM Telephony Call Control Group Configuration
This is from my lab system so the "AgentsLoggedIn" variable would need to contain 1 or 3. You are telling the script which CTI port group to make the call with. You have a 0 in your AgentsLoggedIn so do you have a Group ID of 0?
Your CTI group must be able to make the call so must have the correct partition/Calling Search Space
Graham

Datepicker PopUp opens in the calling PopUp window

Hey Guys, I need some help on this...
I have a button that opens a PopUp window, and in this PopUp I have a "Date Picker" item,
And when I want to select a date, the calendar shows up in the same PopUp window, and I m loosing the calling PopUp(the first one).
How can I do so, that to have my PopUp window, and the calendart to show up in another PopUp?
Thanks in Advance

Hi,
that's because of the Window Name you specified. Specify another one or use the popUp2 method which will create a unique name.
Hope that helps
Patrick
Check out my APEX-blog: http://inside-apex.blogspot.com

Cannot place calls or receive calls on my Sony Bra...

Hi! I got a new Bravia Sony Smart TV, I can connect to the app, but when I try to place calls, or recieve calls, skype tells me that calls are not possible at this time.
I updated skype, the TV software, tried everything and still no luck.
Any possible solution?
Thanks!

Hello DanEvans442! I'm terribly sorry over any issues you've had with your Turbo. You and I have the same model. I love mine! One of the best devices have had in 10 years. I want that to be the same for you! You've mentioned that you've had issues after deboarding the plane. One of the things you'll want to be sure of is that the device isn't inadvertently in Airplane Mode. Please go to Settings> Airplane Mode. If it is set to "On", please turn it off and try your device again. If it was already set to off, then we can move to other possible contributors. Can you describe what happens when you try to use the service? DionM_VZW Follow us on Twitter www.twitter.com/vzwsupport

Cannot place calls after 2.2 update

Today I downloaded and installed the iTunes update, then did the iPhone 2.2 update. Now I cannot place calls with my phone. I can receive calls and all other functions work ok.
I powered off and restarted the phone. No luck.
I reset the phone. No luck.
I went to AT&T and had my SIM card replaced. No luck.
I restored the phone to factory settings. No luck.
I restored the phone from my last backup. No luck.
Any suggestions?
Thanks!

3G
When I press the green Call button it immediately says the call failed.
AT&T verified that my account was in good standing and had no billing/administrative issues. They then replaced my SIM card. Honestly, I didn't trust the AT&T store to do tech-support on the iPhone. Since there was an Apple store about 100 yards away, I went there next.
At the Genius Bar, the man said that there had been some "voltage issues" from updating via a laptop. He said that I should restore it to factory settings, then try again, but this time from a desktop. I tried that, but still, no luck.
It seems odd that I can receive calls, but not place them.

FRM-92100 at toolbar canvases on calling popup-menus

Hi all,
I am migrating our 6i forms to 10g and now there is following problem.
When I call the popup-menu, attached to a toolbar canvas, I´ll get the frm-92100 failure-message. On other canvas-types and items, there are no problems of calling popup-menus.
What could cause this problem?
thank you.

Thanks for your reply,
I´ve created a new popup menu and attached it, but it doesn´t work too.
The error message says:
Java Exception:
oracle.ewt.popup.NoPopupOwnerException
at oracle.ewt.IwAWT.IwMenu.LWPopupMenu._displayPopup(Unknown Source)
at oracle.ewt.IwAWT.IwMenu.LWPopupMenu.popup(Unknown Source)
at oracle.ewt.IwAWT.IwMenu.LWPopupMenu.popup(Unknown Source)
at oracle.forms.handler.FormMenu.show(Unknown Source)
at oracle.forms.handler.MenuInfo.showPopup(Unknown Source)
at oracle.forms.handler.MenuInfo.onUpdate(Unknown Source)
at oracle.forms.handler.MenuInfo.onUpdate(Unknown Source)
at oracle.forms.engine.Runform.onUpdateHandler(Unknown Source)
at oracle.forms.engine.Runform.processMessage(Unknown Source)
at oracle.forms.engine.Runform.processSet(Unknown Source)
at oracle.forms.engine.Runform.onMessageReal(Unknown Source)
at oracle.forms.engine.Runform.onMessage(Unknown Source)
at oracle.forms.engine.Runform.processEventEnd(Unknown Source)
at oracle.ewt.IwAWT.LWComponent.redispatchEvent(Unknown Source)
at oracle.ewt.IwAWT.LWComponent.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
Thomas

We have a 5s active on our account. After turning on a previously active 4s (it had the same number) The 5s can no longer place call and when you call it from another phone the 4s rings, but will not pick up. Texting over the cell networks works fine.

We have a 5s active on our account. After turning on a previously active 4s (it had the same number) The 5s can no longer place call and when you call it from another phone the 4s rings, but will not pick up. Texting over the cell networks works fine. Any suggestions??

hens0861,
Hmm, let's ensure this is working as it should be! So what phone should be active on your account? Did you switch the devices online or how to did you activate the 5s? Please share details.
KarenC_VZW
Follow us on Twitter @VZWSupport

CUPC not able to place call

Hi!
I've a CUCM 8.5.1 and CUPS 8.0.2. I'm a newbie to this thing. I did the configurations with reference from the book. The only problem I have right now is that I'm unable to make a phone call through the CUPC. CUPC is using 7.1. Is this a compatibility issue or something?
Regards,
Nita
Nita

Arni,
The reason the "Place Call" button is not available can be for a few reasons.
1) The number for User1 does not exist in Active Directory. This is where CUPC pulls numbers from for users on the buddy list.
2) As Rahul has suggested it would be wise to look further into your desk phone or soft phone control. I cant see behind the menu to determine which mode you are in, but there's a good chance that the soft phone or desk phone is not connected properly. You can click on the phone icon in the upper right hand corner of the screen and determine what is selected (either desk oh soft phone (phone on computer). Specifically you can check under Help -> Show server health and ensure there is not ! marks on desk phone or soft phone.
If you can provide further information we can troubleshoot further.
Regards,
Jason

Place call to meet-me number fails

Hi All,
I'm hitting a weird issue with trying to place a call from uccx to a meet-me number.
Uccx will place the call and you do hear the party entrance tone but it never plays the prompt. After the timeout on the place call step it goes to the unsuccessful branch and fails.
Same happens with a consult transfer.
I've checked codecs and CSS/partitions so I'm 99% sure it's not that.
Looking in the logs the reason is the call state is active.
Uccx version 9.0.2
Cucm version 9.1.2
Has anyone seem this before and got it working?
Thanks Gus.

Hi Gus-
I have been working with TAC on a similar issue since September. This worked with CUCM 8.5.1.14900-5 / UCCX 9.0.2.10000-71 and stopped working when CUCM was upgraded to 9.1.2.10000-28.
If you use the same script and send the call to a DN on a phone is the call successful?
Have you tried using a Call Redirect step and sending the call to the MeetMe number? (this is my current workaround)
Could you pull the MIVR logs from your 7.x cluster and see if the Destination message (bolded and underlined below) shows as Unknown or if it is something different?
From TAC:
UCCX Engine logs:
//CallCtlConnEstablishedEv is fired:
19893: Sep 27 15:40:46.458 CDT %MIVR-SS_TEL-7-UNK:CallID:9 MediaId:34141/1
Task:27000000014, Local CallCtlConnEstablishedEv [1785:allinternal:1/(P1-jtapiuser_1)
GCID=(1,34141)->ACTIVE]->ESTABLISHED
//The Destination for the connection is unknown:null
19901: Sep 27 15:40:46.464 CDT %MIVR-SS_TEL-7-UNK:snum = 1785, addr.getName = Unknown
19909: Sep 27 15:40:46.483 CDT %MIVR-SS_TEL-7-UNK:CallID:9 MediaId:34141/1
Task:27000000014, Connection to new destination CREATED, new dest: Unknown
//UCCX tries to reach the destination but is not able to as the destination is unknown/null:
19967: Sep 27 15:40:56.453 CDT %MIVR-SS_TEL-7-UNK:CallID:9 MediaId:34141/1
Task:27000000014 did not get destination CONN_ESTABLISHED nor CONN_FAILED event
19968: Sep 27 15:40:56.454 CDT
%MIVR-SS_TEL-7-UNK:Call.rejecting(RESOURCE_NOT_ACKNOWLEDGING)
JTAPICallContact[id=9,type=Cisco JTAPI
Call,implId=34141/1,active=true,state=CALL_INITIATED,inbound=false,handled=false,locale=en
_US,aborting=false,app=App[name=meetMe,type=Cisco Script
Application,id=2,desc=meetMe,enabled=true,max=10,valid=true,cfg=[ApplicationConfig[schema=
ApplicationConfig,time=2013-09-27
14:36:45.0,recordId=57,desc=meetMe,name=meetMe,type=Cisco Script
Application,id=2,enabled=true,sessions=10,script=SCRIPT[meetMeAuthentication-Rev01-test.ae
f],defaultScript=,vars=[],defaultVars=null]]],task=27000000014,session=Session[id=001-0x95
02f9009,parent=null,active=true,state=SESSION_IN_USE,time=1380314446448],seqNum=0,time=138
0314446446,cn=2019,dn=null,cgn=1785,ani=null,dnis=null,clid=null,atype=OUTBOUND,lrd=null,o
cn=2019,odn=null,uui=null,aniii=null,ced=null,OrigProtocolCallRef=null,DestProtocolCallRef
=000000000000855D020F50CF00000000,route=RP[num=0000],port=TP[type=Cisco CTI
Port,id=3,implId=1785,active=true,state=IN_USE],aborting=false,transferring=false,disconne
cting=false]
//Hence, the call is dropped
19969: Sep 27 15:40:56.454 CDT %MIVR-SS_TEL-7-UNK:CallID:9 MediaId:34141/1, dropping the
call, ciscoCall state is ACTIVE
Thanks,
DJ

Why are my Macbook Pro and my iPad able to place calls, but not receive them?

I have a MacBook Pro late 2013 edition and last year's iPad Air as well as the iPhone 5s. I have all of my devices completely signed in to my iCloud account and all of the appropriate boxes checked. I can place calls using my iPad and my computer, but when my phone rings, it doesn't ring on either the iPad or my computer. Strangely enough, my iPad used to receive phone calls a month ago, before most of this all came into play, but as already stated, it now does not. All of my devices are updated to the latest software and I can seamlessly utilize all other handoff features between all three devices.
Any help or advice is greatly appreciated!

Hi, MrsRhiMac.
Thank you for visiting Apple Support Communities.
Here is an article that I would recommend taking a look at when experiencing this issue.
Get help using Continuity with iOS 8 and OS X Yosemite
http://support.apple.com/kb/TS5458
Cheers,
Jason H.

Script,Place call

Hi,when i use the place the call step in the script editor,and the collected string matches an internal number,the place call step rings the destination but as soon as i answer the call,the call does not get really connected and the reactive debug shows that the call goes to the end and i hear an auto generated error message.
lets say phone 2001 call to uccx and then he dialed the extension 2002,the place call step sends the call to 2002,but i see on the phone screens From CTI port 1700 and on the other phone to CTI port 1701,i don't see from 2001 to 2002.
If i use the call redirect step,then i see from 2001 to 2002 and the call works normally.I just can't use the call redirect cause there is no (no answer option) under it .So if the called number didn't answer within 10 sec ,with the call redirect i can't take an action but with the place the call step,i can.
Help will be so appreciated.
Thanks in advance.

As always excpected,you are very helpful.
Thanks man.call consult transfer works,but i have two questions:
1-why did the call fail when i use the place call step ?
2- In the consult transfer step,what are the "output digits" field for?
i used a string variable just to fill the fields,but i didn't see any digits in it when i used the debug !
Thanks in advance.

Supress Place call popup in CIC0

Similar Messages

Maybe you are looking for