SUS 10.7.4 managed clients

SUS running on a 10.7.4 Server, updates are enabled and coppied.
Managed clients are set (through Profile Manager) to use the URL: "http://ourserver.fqdn:8088/index.sucatalog"
The clients insist on using the default software update location.
Any help would be greatly appreciated.

Firstly, that's the wrong URL.
http://server.example.com:8088/index-lion-snowleopard-leopard.merged-1.sucatalog
Secondly, if you get the URL wrong, software update will just error. It won't default back.
It sounds like you have bigger probalms... You should ensure that profile manager is properly pushing settings to clients.
Push the new setting to the client computer and wait for it to complete.
Once it completes, restart the client.
On that client machine in terminal type:
sudo defaults read /Library/Preferences/com.apple.SoftwareUpdate CatalogURL
type your password.
It should echo out the URL you've specified. If it doesn't, then there's something else going on preventing the setting from being pushed out.
-Graham

Similar Messages

SCCM 2012 R2 Configuration Manager Client Package - stuck "In Progress"

Hi Team; I’m having 2 issues with SCCM 2012 R2:
Issue 1: I'm having a strange issue with the default XXX00002 package - "Configuration Manager Client Package",
it will not deploy to the Secondary Site DP. The console is saying "In Progress" - below is the output from the
distmgr.log file.
~Package BDC00002 does not have a preferred sender.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.443+240><thread=6032 (0x1790)>
~CDistributionSrcSQL::UpdateAvailableVersion PackageID=BDC00002, Version=1, Status=2301
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.444+240><thread=6032 (0x1790)>
~StoredPkgVersion (1) of package BDC00002. StoredPkgVersion in database is 1.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.462+240><thread=6032 (0x1790)>
~SourceVersion (1) of package BDC00002. SourceVersion in database is 1.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.462+240><thread=6032 (0x1790)>
~Package BDC00003 does not have a preferred sender.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.443+240><thread=6092 (0x17CC)>
~CDistributionSrcSQL::UpdateAvailableVersion PackageID=BDC00003, Version=1, Status=2301
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.464+240><thread=6092 (0x17CC)>
STATMSG: ID=2301 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BBK-SCCM-PRI.bbk2310.com SITE=PRI PID=2768 TID=6032 GMTDATE=Mon Mar 17 20:00:23.476 2014
ISTR0="Configuration Manager Client Package" ISTR1="BDC00002" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="BDC00002"
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.477+240><thread=6032 (0x1790)>
StateTable::CState::Handle - (2301:1 2014-03-17 20:00:23.476+00:00) >> (0:0 2014-02-28 16:33:45.383+00:00)
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.484+240><thread=6032 (0x1790)>
CStateMsgReporter::DeliverMessages - Queued message: TT=1401 TIDT=0 TID='8ACCAE01-5079-4FCD-A988-C1CD3004B698' SID=2301 MUF=0 PCNT=2, P1='PRI' P2='2014-03-17 20:00:23.476+00:00' P3='' P4=''
P5='' $$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.495+240><thread=6032 (0x1790)>
~StoredPkgVersion (1) of package BDC00003. StoredPkgVersion in database is 1.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.496+240><thread=6092 (0x17CC)>
~SourceVersion (1) of package BDC00003. SourceVersion in database is 1.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.497+240><thread=6092 (0x17CC)>
STATMSG: ID=2301 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BBK-SCCM-PRI.bbk2310.com SITE=PRI PID=2768 TID=6092 GMTDATE=Mon Mar 17 20:00:23.510 2014
ISTR0="Configuration Manager Client Upgrade Package" ISTR1="BDC00003" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400
AVAL0="BDC00003" $$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.510+240><thread=6092 (0x17CC)>
StateTable::CState::Handle - (2301:1 2014-03-17 20:00:23.510+00:00) >> (0:0 2014-02-28 16:33:45.383+00:00)
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.515+240><thread=6092 (0x17CC)>
CStateMsgReporter::DeliverMessages - Queued message: TT=1401 TIDT=0 TID='8ACCAE01-5079-4FCD-A988-C1CD3004B698' SID=2301 MUF=0 PCNT=2, P1='PRI' P2='2014-03-17 20:00:23.510+00:00' P3='' P4=''
P5='' $$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.526+240><thread=6092 (0x17CC)>
CStateMsgReporter::DeliverMessages - Created state message file: D:\Program Files\Microsoft Configuration Manager\inboxes\auth\statesys.box\incoming\1sfb1dbj.SMX
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.571+240><thread=6032 (0x1790)>
Successfully send state change notification 8ACCAE01-5079-4FCD-A988-C1CD3004B698
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.572+240><thread=6032 (0x1790)>
~Exiting package processing thread.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.574+240><thread=6032 (0x1790)>
CStateMsgReporter::DeliverMessages - Created state message file: D:\Program Files\Microsoft Configuration Manager\inboxes\auth\statesys.box\incoming\abaibh8y.SMX
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.637+240><thread=6092 (0x17CC)>
Successfully send state change notification 8ACCAE01-5079-4FCD-A988-C1CD3004B698
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.683+240><thread=6092 (0x17CC)>
~Exiting package processing thread.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:23.685+240><thread=6092 (0x17CC)>
Sleep 30 minutes...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:26.886+240><thread=2936 (0xB78)>
~Used 0 out of 3 allowed processing threads.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:27.948+240><thread=4900 (0x1324)>
~Sleep 3600 seconds...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:27.950+240><thread=4900 (0x1324)>
Sleep 30 minutes...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:31.934+240><thread=2936 (0xB78)>
~Used 0 out of 3 allowed processing threads.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:33.021+240><thread=4900 (0x1324)>
~Sleep 3600 seconds...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:33.023+240><thread=4900 (0x1324)>
~Used 0 out of 3 allowed processing threads.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:38.108+240><thread=4900 (0x1324)>
~Sleep 3600 seconds...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:00:38.111+240><thread=4900 (0x1324)>
Sleeping for 60 minutes before content cleanup task starts.~
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:06:28.094+240><thread=4968 (0x1368)>
Sleep 30 minutes...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 16:30:52.271+240><thread=2936 (0xB78)>
Sleep 30 minutes...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 17:01:10.002+240><thread=2936 (0xB78)>
~Used 0 out of 3 allowed processing threads.
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 17:01:10.977+240><thread=4900 (0x1324)>
~Sleep 3600 seconds...
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 17:01:10.979+240><thread=4900 (0x1324)>
Sleeping for 60 minutes before content cleanup task starts.~
$$<SMS_DISTRIBUTION_MANAGER><03-17-2014 17:06:55.337+240><thread=4968 (0x1368)>
Issue 2: I'm trying to deploy a couple of Packages/Applications using SCCM 2012 R2 running on Win2K8 R2 with no luck, knowing that I could install the packages
on a test VM “in the DataCenter site”, but when trying to deploy the packages to production PC “in the Office Site”,
the status is packages deployment compliance stuck at 0%
Infrastructure:
3 SCCM servers: CAS, PRI & SEC. Both CAS and PRI are in the DataCenter site, and SEC is in the Office site. The office site has several IP subnets.
Boundaries are configured through Forest Discovery “IP Ranges and AD Sites” since that the AD site should contain all the IP subnets that the AD site contains, Boundaries groups are also configured and a site reference
server is configured for each group respectively.
A OU based Collection has been configured that contains 13 PC "the collection contains the PCs that the packages should be installed.
Packages/Applications are configured correctly since that I could successfully deploy the packages to the test VM which is on the same subnet as the CAS and the PRI servers "the DataCenter subnet". The issue
is that I can't deploy the packages to production PCs in the Office subnet!
Firewall rules are configured and applied via GP, and I even turned Windows Firewall off, and still nothing! I tried to manually initiate Computer Policy download via the SCCM GUI and via a script, still no luck!
I tried configuring IP Subnet Boundaries, still no luck!!
Here are the last 2 lines in the LocationServices.log of a client PC at the Office Site:
<![LOG[MPLIST requests are throttled for 00:00:44]LOG]!><time="14:47:00.766+240" date="03-17-2014" component="LocationServices" context="" type="2" thread="5776"
file="lssecurity.cpp:4528"> <![LOG[Current AD site of machine is Default-First-Site-Name]LOG]!><time="14:47:00.777+240" date="03-17-2014" component="LocationServices" context="" type="1"
thread="4884" file="lsad.cpp:770">
And here are the last 4 lines in the ClientLocation.log
<![LOG[Rotating assigned management point, new management point [1] is: BBK-SCCM-PRI.bbk2310.com (7958) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState"
Value="0"/></Capabilities>]LOG]!><time="14:49:04.880+240" date="03-17-2014" component="ClientLocation" context="" type="1" thread="3600" file="lsad.cpp:6311">
<![LOG[Assigned MP changed from <BBK-SCCM-PRI.bbk2310.com> to <BBK-SCCM-PRI.bbk2310.com>.]LOG]!><time="14:49:04.891+240" date="03-17-2014" component="ClientLocation" context="" type="1"
thread="3600" file="lsad.cpp:1532"> <![LOG[Rotating proxy management point, new management point [1] is: BBK-SCCM-SEC.bbk2310.com (7958) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState"
Value="0"/></Capabilities>]LOG]!><time="14:49:05.345+240" date="03-17-2014" component="ClientLocation" context="" type="1" thread="3600" file="lsad.cpp:6374">
<![LOG[Rotating local management point, new management point [1] is: BBK-SCCM-SEC.bbk2310.com (7958) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities>]LOG]!><time="14:49:05.786+240"
date="03-17-2014" component="ClientLocation" context="" type="1" thread="3600" file="lsad.cpp:6436">
It looks like clients in the Office Site can’t connect to the DP/MP of the Secondary Site server which is also a DP.
While on the PC that the application was installed on I see the folowing in the LocationService.log:
<![LOG[Distribution Point='http://BBK-SCCM-PRI.bbk2310.com/SMS_DP_SMSPKG$/Content_69547d2a-339f-4ac4-9523-238c79ff8a52.1', Locality='LOCAL', DPType='SERVER', Version='7958', Capabilities='<Capabilities SchemaVersion="1.0"><Property
Name="SSLState" Value="0"/></Capabilities>', Signature='http://BBK-SCCM-PRI.bbk2310.com/SMS_DP_SMSSIG$/Content_69547d2a-339f-4ac4-9523-238c79ff8a52.1.tar', ForestTrust='TRUE',]LOG]!><time="14:42:59.506+240"
date="03-17-2014" component="LocationServices" context="" type="1" thread="224" file="lsutils.cpp:415"> <![LOG[Calling back with locations for location request {144620BC-4BF0-4878-9554-F67D305ECCF8}]LOG]!><time="14:42:59.522+240"
date="03-17-2014" component="LocationServices" context="" type="1" thread="224" file="replylocationsendpoint.cpp:220">
Is there something wrong with the Distribution point on the Secondary Site server?
Please help…
Thanks..

Update:
I fixed the issue with the default XXX00002 package - "Configuration Manager Client Package", it will not deploy to the Secondary Site DP. I did that through "Update Distribution Points" option, and after a while the status was 100%.
However; the second issue is still unsolved...
Please help..

Managed Client running under root

Hi
Can any one of you here tell me what is Managed Client???
I saw that one in the Activity Monitor and it is running under root account.
Is this one of the Apple Remote Desktop?
Or other Application is running.

Try a google search for *managed client site:apple.com* and peruse the hits.

Unable to generate Bean Managed Client project

Hello,
I am using JDeveloper 9.0.3 Production (build 1035).
For each of our Business Components projects, we create a deployment profile - BC EJB Session Bean, Session Facade (BMT).
Because of the way our application is organized, the default folder proposed for the BMC (Bean Managed Client) project is not suitable.
As it is not possible to modify the BMC project folder or name once generated (maybe here is a slight problem?), we decided to find a different modus operandi to get the same final result.
But, it seems that the only way to create the BMC project is from the very beginning, when the deployment profile is created, and with the default names generated by JDeveloper.
Maybe I am missing something.
Here are the steps I perform:
1. Specify an Application Server Connection (Standalone OC4J) to our development OC4J server.
2. For the BC project, create a Deployment Profile / Business Components EJB Session Bean.
3. For this deployment profile, choose to deploy to Oracle 9iAS EJB Container, using the previously created connection.
4. In the AppModules section of the profile, carefully reset the option "Create AppModule Configurations" after having selected the one AppModule defined in the BC project.
5. In the properties of our AppModule, in the Remote section, I activate now the option "Remotable Application Module" and I select Session Facade (BMT) configuration.
6. In the Target Platform section, I update the Client Project entry to fit our project's organization and press OK.
7. I return to the deployment profile settings and set the option "Create AppModule Configurations".
For my surprise, at this moment the BMC project is not created. Nor if I compile the BC project, or modify again the AppModule, or the configurations, or the deployment profile...
I even tried to quit JDeveloper, re-enter and re-do the same attempts, but useless...
Is there a way to create the BMC project for a BMT Session Facade configuration after having created the deployment profile?
TIA,
Adrian

Sorry, I think I over-reacted. In fact, the only real problem I have is that I cannot move the BMC project from the default project to another.
I already have some projects for my application (which I tested until now in local config) and I want now to make them remotable. The problem with the project that did not want to create the BMC-pair was that it had nothing to remote - no exposed method, nor for AM, nor for VO's ;o)
For a project that already has some remotable methods, the steps to perform are very strict when you want to make it remotable. You are right, if I first make my AM remotable and properly define there the path and name for the client project, I get the good results.
But, even in this case, I did not see any integrated way of moving this project (completely generated by JDev) to another folder. What I do is modify the project in the configuration properties, quit JDev and move the folder manually.
Thank you,
Adrian

Unable to copy hidden package "Configuration Manager Client Package" to local DP

Content status lists it as successfully distributed to all DPs (including the local site server)
However, component status for SMS_DISTRIBUTION_MANAGER continually logs these events:
Distribution Manager failed to process package "Configuration Manager Client Package" (package ID = CDW00001).
Possible cause: Distribution manager does not have access to either the package source directory or the distribution point.
Solution: Verify that distribution manager can access the package source directory/distribution point.
Possible cause: The package source directory contains files with long file names and the total length of the path exceeds the maximum length supported by the operating system.
Solution: Reduce the number of folders defined for the package, shorten the filename, or consider bundling the files using a compression utility.
Possible cause: There is not enough disk space available on the site server computer or the distribution point.
Solution: Verify that there is enough free disk space available on the site server computer and on the distribution point.
Possible cause: The package source directory contains files that might be in use by an active process.
Solution: Close any processes that maybe using files in the source directory. If this failure persists, create an alternate copy of the source directory and update the package source to point to it.
NOTE: It appears to not be any of these causes.
If I look at the smsdpmon.log on the server in question, the following is logged every half hour:
Intializing DP Monitoring Manager...    SMS_Distribution_Point_Monitoring 1/2/2013 1:29:45 PM 2840 (0x0B18)
Getting monitoring thread priority SMS_Distribution_Point_Monitoring 1/2/2013 1:29:45 PM 2840 (0x0B18)
Getting content library root path SMS_Distribution_Point_Monitoring 1/2/2013 1:29:45 PM 2840 (0x0B18)
Getting site code SMS_Distribution_Point_Monitoring 1/2/2013 1:29:45 PM 2840 (0x0B18)
Getting algorithm ID SMS_Distribution_Point_Monitoring 1/2/2013 1:29:45 PM 2840 (0x0B18)
Failed to find algorighm ID from registry. Use default algorithm. SMS_Distribution_Point_Monitoring 1/2/2013 1:29:45 PM 2840 (0x0B18)
Getting DP Cert Type SMS_Distribution_Point_Monitoring 1/2/2013 1:29:45 PM 2840 (0x0B18)
Failed to find DP cert type from registry. Use default type. SMS_Distribution_Point_Monitoring 1/2/2013 1:29:45 PM 2840 (0x0B18)
Getting this DP NALPath SMS_Distribution_Point_Monitoring 1/2/2013 1:29:45 PM 2840 (0x0B18)
Failed to create certificate store from encoded certificate..
An error occurred during encode or decode operation. (Error: 80092002; Source: Windows) SMS_Distribution_Point_Monitoring 1/2/2013 1:29:45 PM 2840 (0x0B18)
Failed to initialize DP monitoring object. Error code: 0x80092002 SMS_Distribution_Point_Monitoring 1/2/2013 1:29:45 PM 2840 (0x0B18)
distmgr.log shows the following:
STATMSG: ID=2304 SEV=I LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BRICK-CONFIGMGR.corp.COMPANY.com SITE=CDW PID=2212 TID=2124 GMTDATE=Wed Jan 02 19:29:45.109 2013 ISTR0="CDW00001" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="CDW00001"   SMS_DISTRIBUTION_MANAGER   1/2/2013 1:29:45 PM   2124 (0x084C)
Retrying package CDW00001   SMS_DISTRIBUTION_MANAGER   1/2/2013 1:29:45 PM   2124 (0x084C)
No action specified for the package CDW00001.   SMS_DISTRIBUTION_MANAGER   1/2/2013 1:29:45 PM   2124 (0x084C)
Start validating package CDW00001 on server ["Display=\\BRICK-CONFIGMGR.corp.COMPANY.com\"]MSWNET:["SMS_SITE=CDW"]\\BRICK-CONFIGMGR.corp.COMPANYNAME.com\...   SMS_DISTRIBUTION_MANAGER   1/2/2013 1:29:45 PM   2124 (0x084C)
Failed to start DP health monitoring task for package 'CDW00001'. Error code: -1   SMS_DISTRIBUTION_MANAGER   1/2/2013 1:29:45 PM   2124 (0x084C)
Updating package info for package CDW00001   SMS_DISTRIBUTION_MANAGER   1/2/2013 1:29:45 PM   2124 (0x084C)
Only retrying local DP update for package CDW00001, no need to replicate package definition to child sites or DP info to parent site.   SMS_DISTRIBUTION_MANAGER   1/2/2013 1:29:45 PM   2124 (0x084C)
StoredPkgVersion (2) of package CDW00001. StoredPkgVersion in database is 2.   SMS_DISTRIBUTION_MANAGER   1/2/2013 1:29:45 PM   2124 (0x084C)
SourceVersion (2) of package CDW00001. SourceVersion in database is 2.   SMS_DISTRIBUTION_MANAGER   1/2/2013 1:29:45 PM   2124 (0x084C)
STATMSG: ID=2302 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=BRICK-CONFIGMGR.corp.COMPANYNAME.com SITE=CDW PID=2212 TID=2124 GMTDATE=Wed Jan 02 19:29:45.213 2013 ISTR0="Configuration Manager Client Package" ISTR1="CDW00001" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="CDW00001"   SMS_DISTRIBUTION_MANAGER   1/2/2013 1:29:45 PM   2124 (0x084C)
Failed to process package CDW00001 after 41 retries, will retry 59 more times   SMS_DISTRIBUTION_MANAGER   1/2/2013 1:29:45 PM   2124 (0x084C)
Exiting package processing thread.   SMS_DISTRIBUTION_MANAGER   1/2/2013 1:29:45 PM   2124 (0x084C)
Used 0 out of 3 allowed processing threads.   SMS_DISTRIBUTION_MANAGER   1/2/2013 1:29:50 PM   3784 (0x0EC8)
Sleep 1825 seconds...   SMS_DISTRIBUTION_MANAGER   1/2/2013 1:29:50 PM   3784 (0x0EC8)

Both errors are certificate related. Is there anything special about your configuration such as special ACLs on the certificate store or FIPS compliance mode (see
http://support.microsoft.com/kb/811833) being enabled?
Nothing special with certificates; I've used the basic stuff for intranet management of clients.
The only related thing I can think of that may have affected this, is that I discovered earlier today that my MP installation got hosed (error 500) due to a broken client install on the site server itself. I uninstalled the client manually and the server
(as indicated by the component status views) appears to have repaired the MP install. Perhaps it didn't repair it completely? Would a site reset do me any good?

How do you set up your Configuration Manager client when Imaging?

OK everyone we got an issue that we need to take care of sorry if this seems like a dumb question but we cant seem to make this work. How do you set your configuration manager client when you deploy your image(s)? I created package and pointed
it right to the config manager install directory just like the recommended one for USMT but it does not seem to work. I also tried to leave it blank but it appears to be mandatory.. So my question how do YOU get it to work for your areas?
Thanks

that might be the problem I dont see a "Microsoft Configuration Manager Client 5.0 All" anywhere. We threw something together that points to:
\\Server.Domain.com\SCCM_Install\SMSSETUP\CLIENT
What is happening is this.
Have a task to deploy Windows natively to the workstation
Drop applications to the workstation
do updates
capture back to server
All it does is
Drop the OS down
copy the Agent files
join to the domain
reboot
sit
sit
and sit

Cannot download master page using managed client object model SharePoint 2010

string siteUrl = "http://server:port/sites/demo";
string fileServerRelativeUrl = @"/sites/demo/_catalogs/masterpage/v4.master";
using (ClientContext context = new ClientContext(siteUrl)){ FileInformation fileInfo = Microsoft.SharePoint.Client.File.OpenBinaryDirect(context, fileServerRelativeUrl);}
File.OpenBinaryDirect() throws "The remote server returned an error: (404) Not Found" error. while Microsoft.SharePoint.Client.File f1 = web.GetFileByServerRelativeUrl(fileUrl);
context.Load(f1);
context.ExecuteQuery();this gives the file object.File.OpenBinaryDirect() works if I pass "/sites/demo/_catalogs/masterpage/TabViewPageLayout.aspx" as fileServerRelativeUrl.Both the files are present in Master Page Gallery.File.OpenBinaryDirect() doesn't work if I pass any of ".master" file in the master page galleryPlease let me know whether downloading the master pages is supported using managed Client object model.

Hi,
If don't change the default config, We are unble to download master page.
It's better to create your own (perhaps based on the default.master) and use that master page.
also,make sure there's no a permission issue on the website.
Thanks
Guangchao chen
TechNet Community Support

Configuration Manager client upgrade package failing to download to DPs

Hello,
I am receiving the following error in distmgr.log "Failed to get RDC signature path for for package SF100004 version 1. Error = 2"
"SF100004" is the "Configuration Manager client upgrade package"
Is there a way to rebuild/repair this package?

Yes, I did find out how to fix the problem. I had to use a power shell script to call WMI on the site server to manually force a refresh of the package having problems.
$SiteCode = "SF1"
$PackageID = "SF100004"
$distpoints = Get-WmiObject -Namespace "root\SMS\Site_$($SiteCode)" -Query "Select * From SMS_DistributionPoint WHERE PackageID='$PackageID'"
foreach ($dp in $distpoints)
$dp.RefreshNow = $true
$dp.Put()

EMC Replication Manager Client on Solaris 10 Zone?

Hello,
Hoping I could find out if anyone out there has had success running EMC's Replication Manager (client) on a Solaris zone where an Oracle database is running, and how it was installed. Normally we install 3rd party software on the Global host /opt, and then call the libs, etc, from the zone (the global host's /opt is made readable to the zone). An obvious solution would be to install the client directly within the zone, but should we need to add another zone for redundancy purposes (two hosts running one database each, should one host go down, we'd migrate it's zone w/ the other database over to the other host), we would have to install the EMC client (again), rather than being able to just call the same deployment from the Global host from within the new zone.
Any info or links to info would be appreciated. I tried searching around but didn't find anything.
Vlad

Hi,
Thanks once again for reply!!
If you already installed Oracle Virtual Directory Manager on Sun SPARC, can you brief us pre-requisite setting and installation steps, so that we can follow the same.
Because, we are getting error in the initialization of installation process itself. So, I think there must be some configuration settings to be made.
We already raised SR (Service Request) with Oracle, bu there is no reply from their side till now.
I am waiting for your reply ASAP
Regards

How to configure SNMP on all managed client using SCCM 2012 SP1

hi ,
do you know How to configure SNMP on all managed client using SCCM 2012 SP1?

As a side note, I made an interesting discovery last week: the SNMP Service is deprecated in Windows Server 2012. Why would you want to use SNMP on an actual Windows OS though? There are far better ways available to monitor Windows. I'm sure that lines
up with why they deprecated it.
Jason | http://blog.configmgrftw.com

Build and Capture TS fails in "Prepare Configuration Manager Client" task

I have a ConfigMgr 2012 R2 + CU1 I use for Windows 7 deployment.
I have made a "build and Capture" TS in ConfigMgr that I use to build my reference image.
When I run the TS it fails at the "Prepare Configuration Manager Client" step where I get the following error:
The task sequence execution engine failed executing the action (Prepare Configuration Manager Client) in the group (Capture the Reference Machine) with the error code 2147749938
Action output: ... 1 instance(s) of 'SMS_MaintenanceTaskRequests' successful
Successfully reset Registration status flag to "not registered"
Successfully disabled provisioning mode.
Start to cleanup TS policy
getPointer()->ExecQuery( BString(L"WQL"), BString(pszQuery), lFlags, pContext, ppEnum ), HRESULT=80041032 (e:\nts_sccm_release\sms\framework\core\ccmcore\wminamespace.cpp,463)
ns.Query(sQuery, &spEnum), HRESULT=80041032 (e:\qfe\nts\sms\framework\tscore\utils.cpp,3666)
End TS policy cleanup
TS::Utility::CleanupPolicyEx(false), HRESULT=80041032 (e:\nts_sccm_release\sms\client\osdeployment\preparesmsclient\preparesmsclient.cpp,564)
pCmd->Execute(), HRESULT=80041032 (e:\nts_sccm_release\sms\client\osdeployment\preparesmsclient\main.cpp,136)
Wmi query 'select *from CCM_Policy where PolicySource = 'CcmTaskSequence'' failed, hr=0x80041032
Failed to delete policies compiled by TaskSequence (0x80041032)
Failed to prepare SMS Client for capture, hr=80041032
Failed to prepare SMS Client for capture, hr=80041032. The operating system reported error 2147942402: The system cannot find the file specified.
If I disable the "Install Software Updates" part of my TS it will run without probems. It installs 154 updates during the build.
I have seen another reference to this problem on this forum but why should the large number of the updates be the reason why the task sequcens cannot prepare the SCCM client for capture.
Sounds to me that it's a BUG :-(
Thomas Forsmark Soerensen

I'm glad I'm not the only one running into this. I've been racking my brain for the past few days trying to figure out where I went wrong.
SCCM 2012 R2 CU1
Installation properties in TS: SMSMP=mp.f.q.d.n FSP=mp.f.q.d.n DNSSUFFIX=f.q.d.n PATCH="%_SMSTSMDataPath%\Packages\AP200003\hotfix\KB2882125\Client\x64\configmgr2012ac-sp1-kb2882125-x64.msp;%_SMSTSMDataPath%\Packages\AP200003\hotfix\KB2905002\Client\x64\configmgr2012ac-r2-kb2905002-x64.msp;%_SMSTSMDataPath%\Packages\AP200003\hotfix\KB2938441\Client\x64\configmgr2012ac-r2-kb2938441-x64.msp"
Drop Windows 7 WIM that has all the updates Schedule Updates (offline servicing) installed (169 of 277)
Apply several updates offline (the dual-reboot Windows 7 updates among others)
Run Windows Updates more than once to be sure I get everything
Breaks at the preparing client for capture step
Is this:
a bug?
a known issue
something that's just frowned upon for no technical reason?
I'd love to hear from an SCCM guru [at Microsoft] on what the heck is going on here.

Config manager client deployment script states the user is not a local admin

Guys I posted here a while back in regards to deploying config manager clients in a wan environment.One of the suggestions was to use Jason Sandy's script. I finally got around to playing around with the script however I ran into some strange problems
while testing.I am deploying this via the user side of group policy not the computer side. The script goes out and installs the client the problem is when our users click on any Citrix application the script pops up a message box stating "the user is
not a local admin". I don't see how that's the case because this group of users all have local admin rights on there systems. If I run this script as a domain admin or under the system account everything works smoothly. Citrix is the only application
that's doing this however this is a big deal because we deliver all of our enterprise apps using Citrix. So has anyone here ran into this before?

Hi,
As this thread has been quiet for a while, we assume that the issue has been resolved. At this time, we will mark it as "Answered" as the previous steps should be helpful for many similar scenarios.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Managing Client Prefs not working

I have a OD master and most of my services are working fine, like ichat, ical, file serving etc.
I cannot get the workgroup manager / preferences to be applied to the client. I can change them, but then when i go to the client, nothing happens.
(i am try to do things like define software update path, make shared folders be always visable, change default energy saving settings, etc.
there is no information in the system profiler under managed client
in the accounts window of each client is says they are managed.
i believe i am making a basic error in my understanding of managed clients. Do they somehow log into the server to get that information? how do i get them to do that?

Eric Hilferding wrote:
do i have to log out or restart for a change to take place?
You can just log out then back in.
Eric Hilferding wrote:
is it normal to have to setup the COMPUTER to effect the changes instead of USERS?
I'm going to say no to this though I'm in the same position as you USERS and USER GROUPS doesn't apply the effect of the preferences but COMPUTERS and COMPUTER GROUPS does.
As I understand it COMPUTERS and COMPUTER GROUPS is applied to the machine no matter who is logged in were USERS and USER GROUPS is the user/group only. So for example if your running a software update server your probably best setting up a COMPUTER GROUP call something like "All computers" or "All Snow Leopard Computers" etc if running different operating systems on your clients (as there is a different http link you use in the WGM software update prefs depending on OS) and applying the software update pref to that COMPUTER/GROUP.
If you were to apply a software update pref to the USER due to the three different http links needs for the correct catalog then should the user move mac to a different OS you'd get an issue.
I'm new to the whole server bit so someone else could probably tell use what were missing with regards USERS and GROUPS
How ever a couple of tips I've picked up (or fallen foul of!)
In workgroup manager in prefs under the tab Details you'll see a list of your managed prefs with a little arrow next to them you can ad more prefs to control from here they just don't get the nice UI like under the Overview pane.
In WGM > Prefs > Details (TAB)
click on the small + button and navigate to
Server HD > System > Library > CoreServices > ManagedClient
The click ADD
It will then place in loads of PLIST files that you can edit to control things like iTunes etc
I think there called MCX files you may need to google it for a better explanation
Also I don't know if you use the Servers default locations for storing say Address Book Server Doc etc but if you ever set up a MySQL service and you change the data location from the default (in server admin) then don't use spaces any were in the path. I did and it got stuck in a startup loop and caused me hours of headache!
So
Volumes/My External Hard Disk/Server Data/MySQL Database
Is a big no no. Use
Volumes/ExternalHD/ServerData/MySQLDatabase
Or just leave were Apple wants it! lol
Finally if you set the TIME & DATE System Pref on your server to grab the time/date from say time.apple.com (or what ever the defaults are) but then on your clients set them to look at your servers FQDN for time/date this syncs everyone to the server which is apparently good for KERBEROUS and also stops them going out over the internet.

Syclo : Error in connecting Work Manager Client with Agentry Server

Hi,
Can somebody please shed some light on work manager client-server connections? I have downloaded the "SAP_WORK_MANAGER_BY_SYCLO_5.2" package from market place and set up the Work Manager server. It can successfully connect to the SAP back-end. Environment variables are correctly set too. However, I'm failing to connect to the Work Manager server from the Work Manager clients. I have tried from the Win32 & Android clients both.
For Win32 client, the error I'm getting is:
For Android, I can't even see the server instance, although it's running (it shows up while attempting to connect from Win32). Error:
When I attempt to connect from Work Manager client to the server, it asks for username/password and for Android client it asks for Agentry user id and password. Aren't these username/password of the server where my Work Manager (Agentry) server is installed?
Also, the "Agentry Development Server" which has been set to run as a service runs with Administrative privileges.
I followed this: http://wiki.scn.sap.com/wiki/display/SAPMOB/Agentry+error+Client+Receiving+RFC+ERROR+LOGON+FAILURE+incomplete+logon+Data+when+connecting+to+server
It didn't help. Please let me know where I'm going wrong?
Tags edited by: Michael Appleby

Hi Michael,
I can login to SAP backend using the credentials mentioned in JavaBE.ini file.
Please take a look at the JavaBE.ini:
[HOST]
server=<SAP server host name>
; mobile application name configured in sap like SMART_WORK_MANAGER_51, SMART_CUSTOMER_SERVICE_10, SMART_ISU_WORK_MANAGER_10...etc
APPNAME=SMART_WORK_MANAGER_52
[CONFIG]
; Used to get the SAP Configutaions from SAP if source=SAP or from JavaBE ini file
; SAP Configurations are [ENABLE_TABLE], [TABLE_CHECK], [TABLE_REFRESH], [BAPI_WRAPPER],
; [SAPOBJECT], [CT_SAPOBJECT], [CT_BAPI_WRAPPER], [CT_RETURN_TABLE], [CT_DELETE_TABLE].....etc
source=SAP
[TEST_LOGON]
UID=
UPASSWORD=
UGUID=
SERVERSERIALNUM=
; Service login user is used to get the SAP Configutaions from SAP if source=SAP
; Set ENABLED=true if source=SAP or ENABLED=false if source=INI
; If ENABLED=true, set the UID, UPASSWORD and SERVERSERIALNUM
; SERVERSERIALNUM is the Agentry server serial number
[SERVICE_LOGON]
ENABLED=true
UID=<SAP backend username>
UPASSWORD=<SAP backend password>
UPASSWORDENCODED=false
SERVERSERIALNUM=AVKNN@NILKGGBTLD
[PUSH_LOGON]
ENABLED=false
UID=
UPASSWORD=
UPASSWORDENCODED=false
SHAREDCONNECTION=10
[CLIENT_NUM]
CLIENT=720
;CLIENT=010
[SYSTEM_NUM]
;SYSNUM=33
SYSNUM=00
[LANGUAGE]
LANG=EN
[LOGGING]
;1=Fatal, 2=Error, 3=Warning, 4=Info, 5=debug, 6=trace
Level=4
[LOGON_METHOD]
; USER_AUTH if standard UID/Password authentication is used
; USER_AUTH_GLOBAL if pooled connections using single UID/Password is used
; USER_AUTH_GROUP if UID/Password authentication with SAP Message Server
; (load balancing) is used
LOGON_METHOD=USER_AUTH
[GLOBAL_LOGON]
; referenced when LOGON_METHOD=USER_AUTH_GLOBAL
; uses a pool of connections to the SAP backend all utilizing a single
; UID/password
UID=
UPASSWORD=
SHAREDCONNECTION=100
[GROUP_LOGON]
; referenced when LOGON_METHOD=USER_AUTH_GROUP
; individual user authentication using an SAP Message Server which distributes
; client connections among a "group" of SAP application servers based on load
; balancing criteria
; host name or IP address of SAP Message Server
MESSAGE_SERVER=
GROUP_NAME=
SYSTEM_ID=
CLIENT=
[REQUIRED_BAPI_WRAPPER]
com.syclo.sap.bapi.LoginCheckBAPI=/SYCLO/CORE_SUSR_LOGIN_CHECK
com.syclo.sap.bapi.RemoteUserCreateBAPI=/SYCLO/CORE_MDW_SESSION1_CRT
com.syclo.sap.bapi.RemoteParameterGetBAPI=/SYCLO/CORE_MDW_PARAMETER_GET
com.syclo.sap.bapi.SystemInfoBAPI=/SYCLO/CORE_SYSTINFO_GET
com.syclo.sap.bapi.ChangePasswordBAPI=/SYCLO/CORE_SUSR_CHANGE_PASSWD
com.syclo.sap.bapi.CTConfirmationBAPI=/SYCLO/CORE_OUTB_MSG_STAT_UPD
com.syclo.sap.bapi.DTBAPI=/SYCLO/CORE_DT_GET
com.syclo.sap.bapi.GetEmployeeDataBAPI=/SYCLO/HR_EMPLOYEE_DATA_GET
com.syclo.sap.bapi.GetUserDetailBAPI=/SYCLO/CORE_USER_GET_DETAIL
com.syclo.sap.bapi.GetUserProfileDataBAPI=/SYCLO/CORE_USER_PROFILE_GET
com.syclo.sap.bapi.PushStatusUpdateBAPI=/SYCLO/CORE_PUSH_STAT_UPD
com.syclo.sap.bapi.RemoteObjectCreateBAPI=/SYCLO/CORE_MDW_USR_OBJ_CRT
com.syclo.sap.bapi.RemoteObjectDeleteBAPI=/SYCLO/CORE_MDW_USR_OBJ_DEL
com.syclo.sap.bapi.RemoteObjectGetBAPI=/SYCLO/CORE_MDW_SESSION_GET
com.syclo.sap.bapi.RemoteObjectUpdateBAPI=/SYCLO/CORE_MDW_SESSION_UPD
com.syclo.sap.bapi.RemoteReferenceCreateBAPI=/SYCLO/CORE_MDW_USR_KEYMAP_CRT
com.syclo.sap.bapi.RemoteReferenceDeleteBAPI=/SYCLO/CORE_MDW_USR_KEYMAP_DEL
com.syclo.sap.bapi.RemoteReferenceGetBAPI=/SYCLO/CORE_MDW_SESSION_GET
com.syclo.sap.bapi.RemoteReferenceUpdateBAPI=/SYCLO/CORE_MDW_SESSION_UPD
com.syclo.sap.bapi.RemoteSessionDeleteBAPI=/SYCLO/CORE_MDW_SESSION1_DEL
com.syclo.sap.bapi.RemoteUserDeleteBAPI=/SYCLO/CORE_MDW_SESSION1_DEL
com.syclo.sap.bapi.RemoteUserUpdateBAPI=/SYCLO/CORE_MDW_SESSION_UPD
com.syclo.sap.bapi.TransactionCommitBAPI=WFD_TRANSACTION_COMMIT
com.syclo.sap.bapi.SignatureCaptureBAPI=/SYCLO/CS_DOBDSDOCUMENT_CRT
I haven't yet installed ATE and tested out any application. I just want my connections to be perfect, first.
I have a question. Are the credentials used to connect Work Manager client to the server, same as the SAP backend credentials or are they the credentials of the host on which the Work Manager server is installed?
I have tried logging in using the SAP credentials also. But that results in error too.
These credentials are valid for SAP backend and successfully logs onto it and also responds correctly to connectTest.bat. However, I think this error is logical because these are the credentials for SAP backend and not the server where Work Manager server is hosted.

How can Webservice manage client sections and send back messages to clients

Hi all.
I am starting working with Webservice (jax-ws). Now i can make a good server side and on client side i can use method interface on webservice server side.
But i want to make a advance feature as Server side manage client section and can send back message to client when Server change status...
I know RMI and Corba can seems to support to send back messages to sections of cliens right ?
So Webservice can do it ? Please help me !
Thanks
Diego
Edited by: ThuCT on Sep 14, 2010 1:57 AM

Hi all.
I am starting working with Webservice (jax-ws). Now i can make a good server side and on client side i can use method interface on webservice server side.
But i want to make a advance feature as Server side manage client section and can send back message to client when Server change status...
I know RMI and Corba can seems to support to send back messages to sections of cliens right ?
So Webservice can do it ? Please help me !
Thanks
Diego
Edited by: ThuCT on Sep 14, 2010 1:57 AM

SUS 10.7.4 managed clients

Similar Messages

Maybe you are looking for