SUS domain in catalogs is wrong

We have recently purchased a Mac server for using the SUS to update our Macs, but we have run into a problem. Originally the problem was that when any computer tried to update with the server, it would quickly run through the catalog and say no updates, even though there were updates. We found that this is because the server's location is actually macserver.example.com, but in the catalog files it lists the updates at just macserver.com. We have found that editing these catalogs and replacing all instances of macserver.com with macserver.example.com makes the updates work, but only until the catalogs are rewritten by the service. Does anyone know where the setting would be to make is so it writes the right name to the catalogs?
-Thanks
Message was edited by: CofoHelpDesk

You have DNS and hostname setup right? It looks like the domainname ("example") is missing.
Test using: sudo changeip -checkhostname
Also check "Network" prefpane "search domain" field to say "example.com" and in Sharing setup it should only say (hostname) "macserver".

Similar Messages

  • Recovery Catalog showing wrong Archive Destination

    Hi All,
    I am using Oracle 10g on Solaris 10.
    The problem I am facing is this, while taking backup using recover catalog..............
    Starting backup at 27-JUL-11
    current log archived
    released channel: ch00
    released channel: ch01
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of backup command at 07/27/2011 11:16:47
    RMAN-06059: expected archived log not found, lost of archived log compromises recoverability
    ORA-19625: error identifying file /u01/oracle/product/10.2.0/db_1/dbs/arch1_56_757089402.dbf
    ORA-27037: unable to obtain file status
    SVR4 Error: 2: No such file or directory
    Additional information: 3
    This is because of the following reason
    RMAN> list archivelog all;
    List of Archived Log Copies
    Key Thrd Seq S Low Time Name
    39401 1 1567 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1567_756523261.dbf
    39402 1 1568 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1568_756523261.dbf
    39403 1 1569 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1569_756523261.dbf
    39404 1 1570 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1570_756523261.dbf
    39405 1 1571 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1571_756523261.dbf
    39406 1 1572 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1572_756523261.dbf
    39407 1 1573 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1573_756523261.dbf
    39408 1 1574 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1574_756523261.dbf
    39409 1 1575 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1575_756523261.dbf
    39410 1 1576 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1576_756523261.dbf
    39411 1 1577 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1577_756523261.dbf
    39412 1 1578 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1578_756523261.dbf
    39413 1 1579 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1579_756523261.dbf
    39414 1 1580 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1580_756523261.dbf
    39415 1 1581 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1581_756523261.dbf
    39416 1 1582 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1582_756523261.dbf
    39417 1 1583 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1583_756523261.dbf
    39418 1 1584 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1584_756523261.dbf
    39419 1 1585 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1585_756523261.dbf
    39420 1 1586 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1586_756523261.dbf
    39421 1 1587 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1587_756523261.dbf
    39422 1 1588 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1588_756523261.dbf
    39423 1 1589 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1589_756523261.dbf
    39424 1 1590 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1590_756523261.dbf
    39425 1 1591 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1591_756523261.dbf
    39426 1 1592 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1592_756523261.dbf
    39427 1 1593 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1593_756523261.dbf
    39428 1 1594 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1594_756523261.dbf
    39429 1 1595 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1595_756523261.dbf
    39430 1 1596 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1596_756523261.dbf
    39431 1 1597 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1597_756523261.dbf
    39432 1 1598 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1598_756523261.dbf
    39433 1 1599 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1599_756523261.dbf
    39434 1 1600 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1600_756523261.dbf
    39435 1 1601 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1601_756523261.dbf
    39436 1 1602 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1602_756523261.dbf
    39437 1 1603 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1603_756523261.dbf
    39438 1 1604 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1604_756523261.dbf
    39439 1 1605 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1605_756523261.dbf
    39440 1 1606 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1606_756523261.dbf
    39441 1 1607 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1607_756523261.dbf
    39442 1 1608 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1608_756523261.dbf
    39443 1 1609 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1609_756523261.dbf
    39444 1 1610 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1610_756523261.dbf
    39445 1 1611 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1611_756523261.dbf
    39446 1 1612 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1612_756523261.dbf
    39447 1 1613 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1613_756523261.dbf
    39448 1 1614 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1614_756523261.dbf
    39449 1 1615 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1615_756523261.dbf
    39450 1 1616 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1616_756523261.dbf
    39451 1 1617 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1617_756523261.dbf
    39452 1 1618 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1618_756523261.dbf
    39453 1 1619 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1619_756523261.dbf
    39454 1 1620 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1620_756523261.dbf
    39455 1 1621 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1621_756523261.dbf
    39456 1 1622 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1622_756523261.dbf
    39457 1 1623 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1623_756523261.dbf
    39458 1 1624 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1624_756523261.dbf
    39459 1 1625 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1625_756523261.dbf
    39460 1 1626 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1626_756523261.dbf
    39461 1 1627 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1627_756523261.dbf
    39462 1 1628 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1628_756523261.dbf
    39463 1 1629 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1629_756523261.dbf
    39464 1 1630 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1630_756523261.dbf
    39465 1 1631 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1631_756523261.dbf
    39466 1 1632 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1632_756523261.dbf
    39467 1 1633 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1633_756523261.dbf
    39468 1 1634 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1634_756523261.dbf
    39469 1 1635 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1635_756523261.dbf
    39470 1 1636 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1636_756523261.dbf
    39471 1 1637 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1637_756523261.dbf
    39682 1 1638 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1638_756523261.dbf
    39689 1 1639 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1639_756523261.dbf
    40642 1 1640 A 26-JUL-11 /oradb2/Archive/HCSPRD91/1_1640_756523261.dbf
    40643 1 1641 A 27-JUL-11 /oradb2/Archive/HCSPRD91/1_1641_756523261.dbf
    40644 1 1642 A 27-JUL-11 /oradb2/Archive/HCSPRD91/1_1642_756523261.dbf
    40645 1 1643 A 27-JUL-11 /oradb2/Archive/HCSPRD91/1_1643_756523261.dbf
    40646 1 1644 A 27-JUL-11 /oradb2/Archive/HCSPRD91/1_1644_756523261.dbf
    40647 1 1645 A 27-JUL-11 /oradb2/Archive/HCSPRD91/1_1645_756523261.dbf
    40648 1 1646 A 27-JUL-11 /oradb2/Archive/HCSPRD91/1_1646_756523261.dbf
    41310 1 1647 A 27-JUL-11 /oradb2/Archive/HCSPRD91/1_1647_756523261.dbf
    41317 1 1648 A 27-JUL-11 /oradb2/Archive/HCSPRD91/1_1648_756523261.dbf
    41373 1 1649 A 27-JUL-11 /oradb2/Archive/HCSPRD91/1_1649_756523261.dbf
    41374 1 1650 A 27-JUL-11 /oradb2/Archive/HCSPRD91/1_1650_756523261.dbf
    41375 1 1651 A 27-JUL-11 /oradb2/Archive/HCSPRD91/1_1651_756523261.dbf
    41383 1 1652 A 27-JUL-11 /oradb2/Archive/HCSPRD91/1_1652_756523261.dbf
    *38725 1 56 A 26-JUL-11 /u01/oracle/product/10.2.0/db_1/dbs/arch1_56_757089402.dbf*
    *38946 1 57 A 26-JUL-11 /u01/oracle/product/10.2.0/db_1/dbs/arch1_57_757089402.dbf*
    *39000 1 58 A 26-JUL-11 /u01/oracle/product/10.2.0/db_1/dbs/arch1_58_757089402.dbf*
    *39022 1 59 A 26-JUL-11 /u01/oracle/product/10.2.0/db_1/dbs/arch1_59_757089402.dbf*
    *39243 1 60 A 26-JUL-11 /u01/oracle/product/10.2.0/db_1/dbs/arch1_60_757089402.dbf*
    *39297 1 61 A 26-JUL-11 /u01/oracle/product/10.2.0/db_1/dbs/arch1_61_757089402.dbf*
    *39703 1 62 A 26-JUL-11 /u01/oracle/product/10.2.0/db_1/dbs/arch1_62_757089402.dbf*
    *39704 1 63 A 26-JUL-11 /u01/oracle/product/10.2.0/db_1/dbs/arch1_63_757089402.dbf*
    *39705 1 64 A 26-JUL-11 /u01/oracle/product/10.2.0/db_1/dbs/arch1_64_757089402.dbf*
    *39933 1 65 A 27-JUL-11 /u01/oracle/product/10.2.0/db_1/dbs/arch1_65_757089402.dbf*
    *39991 1 66 A 27-JUL-11 /u01/oracle/product/10.2.0/db_1/dbs/arch1_66_757089402.dbf*
    *40023 1 67 A 27-JUL-11 /u01/oracle/product/10.2.0/db_1/dbs/arch1_67_757089402.dbf*
    *40024 1 68 A 27-JUL-11 /u01/oracle/product/10.2.0/db_1/dbs/arch1_68_757089402.dbf*
    *40025 1 69 A 27-JUL-11 /u01/oracle/product/10.2.0/db_1/dbs/arch1_69_757089402.dbf*
    *40254 1 70 A 27-JUL-11 /u01/oracle/product/10.2.0/db_1/dbs/arch1_70_757089402.dbf*
    *40308 1 71 A 27-JUL-11 /u01/oracle/product/10.2.0/db_1/dbs/arch1_71_757089402.dbf*
    *40345 1 72 A 27-JUL-11 /u01/oracle/product/10.2.0/db_1/dbs/arch1_72_757089402.dbf*
    *40570 1 73 A 27-JUL-11 /u01/oracle/product/10.2.0/db_1/dbs/arch1_73_757089402.dbf*
    *41329 1 74 A 27-JUL-11 /u01/oracle/product/10.2.0/db_1/dbs/arch1_74_757089402.dbf*
    I dont know from where recovery catalog is getting the information in bold.
    I have crosschecked and deleted archives and resynced the catalog several times. Immediatly after doing that the backup works fine, but the other day its the same thing all over again.
    Can some one tell me from where the catalog is getting this wrong infomation about archivelogs???
    By the way here is some more info about my target Database:
    Connected to:
    Oracle Database 10g Enterprise Edition Release 10.2.0.5.0 - 64bit Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    SQL> archive log list
    Database log mode Archive Mode
    Automatic archival Enabled
    Archive destination /oradb2/Archive/HCSPRD91
    Oldest online log sequence 1651
    Next log sequence to archive 1653
    Current log sequence 1653
    NAME TYPE VALUE
    archive_lag_target integer 0
    log_archive_config string
    log_archive_dest string
    log_archive_dest_1 string LOCATION=/oradb2/Archive/HCSPR
    D91
    log_archive_dest_10 string
    log_archive_dest_2 string
    log_archive_dest_3 string
    log_archive_dest_4 string
    log_archive_dest_5 string
    log_archive_dest_6 string
    NAME TYPE VALUE
    log_archive_dest_7 string
    log_archive_dest_8 string
    log_archive_dest_9 string
    log_archive_dest_state_1 string enable
    log_archive_dest_state_10 string enable
    log_archive_dest_state_2 string enable
    log_archive_dest_state_3 string enable
    log_archive_dest_state_4 string enable
    log_archive_dest_state_5 string enable
    log_archive_dest_state_6 string enable
    log_archive_dest_state_7 string enable
    NAME TYPE VALUE
    log_archive_dest_state_8 string enable
    log_archive_dest_state_9 string enable
    log_archive_duplex_dest string
    log_archive_format string %t_%s_%r.dbf
    log_archive_local_first boolean TRUE
    log_archive_max_processes integer 2
    log_archive_min_succeed_dest integer 1
    log_archive_start boolean FALSE
    log_archive_trace integer 0
    remote_archive_enable string true
    standby_archive_dest string ?/dbs/arch
    Regards .....

    Do you have any other DBs with the same DBID as the one you are backing up? Are they connect to the same RMAN catalog?
    Iordan Iotzov
    http://iiotzov.wordpress.com/

  • SUS - Confirmation through Catalog

    Hello Folks,
    Hope your day is going well...I am not lucky today.
    While creating confirmation into SUS for a limit order, I tried inserting items from a catalog. Upon clicking the button "Add Item from Catalog" I encountered with an error as - Serious Error:Error in Catalog Attributes.
    As far as limit PO is concerned, I believe in SUS we can insert items from the catalog at the time of confirmation. Am I missing config. settings, if any?
    We are into SRM 5.0 with Extended Classic on.
    May I request you to please share insight on it.
    Many thanks.
    Reg,

    A further build-on :
    I missed to mention that respective catalog ID has already been assigned to the vendor's attribute in t-code PPOMV_BBP.
    Second, the same catalog can be accessed during shopping cart creation without any hassles. (SRM and SUS both resides on same server in the same client)

  • Replacement or linked song on Spotify's catalog is wrong

    Today I wanted to listen to a song in spotify's catalog (not a local file) and the song played was a live version. This was wrong because the song that should have been played (and the one I wanted to listen to) was the studio version that was released with the album.
    It strikes me as odd because I remember hearing the studio version on spotify. Also, all the other songs in the same album are not linked/replaced. So it was probably replaced after the live version was added to the catalog.
    I don't really know what criteria you use in order to replace/link songs but one of them should be: if the song's name metadata has no "live" in it, then it shouldn't be replaced/linked with one that has it and viceversa.

    clarketf wrote:
    Per,
    If they are having the same problem that I am, the issues is not a wrong track on spotify but spotify linking a local file that is a different version (usually a live version) of the song and playing the local file and not the spotify/album version. Example: Today I was listening the The Features new album The Features. I have a live version of two of the songs, when listening to the album straight from the Features page, it played both live version of the songs I have locally instead of the studio version of the songs from the album. So while your adivce is helpful, I do not think it applies to the situation described above and that I am having.
    Hey :) 
    On those tracks that are being played incorrectly, right click on the track name and select "Unlink Track". That will break the link between your local file and that track and then stream it from Spotify ;) 
    Peter

  • BUG: domains are stored in wrong file when saving a model

    For a project we use a project specific domain file.
    When I want to add a domain I first select the project domain file and then add the domain. I can see that this new domain is stored in this project specific domain xml file.
    However, when I save the model, the just created entry is removed again from the project domain file and the newly created domain will be stored in the default domains file.

    it seems you have design open when add domain into file with design level domains - domain is added to file not to open design, and this is the reason added domain to disappear when design is saved. Add domains to file with closed design and open design after finish adding domains to file and save it. Domains can be edited afterward when design is open.
    We have request for improvements on that.
    Philip

  • B2B Ecommerce - Catalog language wrong

    Hi, experts!
    i have a problem with an Ecommerce B2B catalog.
    I have different shops defined with different logon language.
    I am logging into my shop in EN, and the unit of measurement is displayed in the catalog in HU. I have checked the shop settings, it is fine. I also use the ?language=en option in the URL, but somehow when the JCO gets called the language is HU. This way, the unit of measurement gets displayed in HU, and I cannot process orders.
    as far as I know the language parameter in the URL should overwrite the default language of the JCO.
    Any idea to solve this problem?
    Thanks,
    Szilvi

    Very interesting. Please check two more things.
    1. JCo - component setting in XCM
    2. JCO user (SU01) settings in ECC 6.0
    Check if by chance they are set with language=HU. I din't test any thing. But, just guessing... if these might be causing the problem.

  • Problem with Path Managed property in alternate zones - also we have identified problem with Product catalog in alt zones

    Hi All,
    I'll start "one step back". Note we have resolved this issue but it is worth mentioning:
    Yesterday we set up the product catalog. We were having a lot of inexplicable problems with it initially. After much troubleshooting, we found that it was because we were browsing the SharePoint site via the "Internet Zone" rather than the "Default
    Zone" when we "Connected" our site to the product catalog. Issues experienced:
    1) "Catalog Item URL Format" displayed error "Properties <Managed Property> specified by the shared catalog could not be found in the search schema" when attempting to connect to the catalog, despite that managed property being
    configured correctly. The catalog would connect despite the error, and the navigation worked fine.
    2) The search Result Source for the catalog would not return any results. Configuring the query and selecting "Advanced Mode" would show SPSiteURL:http://externalURL.domain.com. Changing SPSiteURL manually to
    http://InternalURL resulted in results being returned as expected.
    After much troubleshooting, we found that if were browsing SharePoint using the default zone (http://InternalURL) when we connected the Product Catalog, the result source then worked properly (internally and externally).
    Ok, so now onto our current problem:
    The Product Catalog appeared to be working properly (internally and externally) after figuring out that we needed to connect it from the Default Zone. However, we have found a remaining glitch, which doesn't appear to be Product-Catalog-specific. Consider
    the following scenario:
    1) We click a category in our Product Catalog, such as Electronics
    2) A list of our electronic devices are presented via the "Category" display page
    3) If we click on a specific item, a different URL is returned internally vs externally. We only get the friendly managed navigation URL when browsing via the Default zone. And of course totally different pages load based on which URL you get.
    Internal (when browsing via Default zone):
    http://InternalURL/catalog/PRODUCT-CATEGORY/PRODUCT-NAME
    External (when browsing via Internet zone):
    http://ExternalURL.domain.com/catalog/Lists/Products/DispForm.aspx?ID=1
    We have reviewed the display template, and the "Path" managed property is simply being used to render the link. Furthermore, we have configured the Content Search web part's "Property Mappings" to show the "Path" MP, and it
    displays the same (wrong) result externally.
    This tells us that the Path MP is not correctly rendering "Friendly URLs" when using managed navigation.
    Any help/ideas?
    Our environment:
    SharePoint Version: 15.0.4667.1000
    Default Zone: http://InternalURL
    Internet Zone: http://ExternalURL.domain.com
    We are NOT using host named site collections
    We ARE crawling the Default zone URL in our content source
    Thanks,
    Tommy

    Hi,
    We have now also observed the same issue with a Managed Property of type “Hyperlink/Picture”. The picture returns the wrong URL externally.
    This post describes the same issue, however the poster found that setting UseAAMMapping=True doesn’t work in 2013:
    http://sharepoint.stackexchange.com/questions/104806/set-the-useaammapping-property-of-a-managedproperty-object-map-an-url-of-a-h
    We checked, and our Picture MP had UseAAMMapping=False. We set it to True, did a full crawl, and see no change in behavior. Path already had UseAAMMapping=True.
    More info:
    http://macslui.blogspot.com/2013/02/sharepoint-2010-problem-in-image-result.html
    https://camerondwyer.wordpress.com/2014/08/04/beware-sharepoint-2013-search-results-and-the-listurl-property/#comment-2606
    Thanks,
    Tommy

  • Oracle Forms and Reports Installation - Creating domain failed

    I installed the weblogic 10.3.6 (Oracle WebLogic Server 11gR1 (10.3.6) + Coherence + OEPE - Package Installer) in my Microsoft Windows(32-bit JVM) system first.
    But there was an error occorred when the package of forms and reports (Oracle Forms and Reports 11gR2 (11.1.2.2.0)) was installing.
    Please find the following error message for your reference.
    Do you have any idea? Please kindly advise.
    Thanks a lot!
    2014-04-02 14:11:14,099 INFO  [main] com.oracle.cie.domain.script.ScriptExecutor - read template from "C:/Users/GZ/AppData/Local/Temp//tmp1396419069239wls.jar"
    2014-04-02 14:11:16,185 INFO  [main] com.oracle.cie.domain.template.catalog.impl.ComponentsXMLConverter - C:\Oracle\Middleware\wlserver_10.3\common\lib\components.xml does not contain component elements and will be skipped
    2014-04-02 14:11:17,556 INFO  [main] com.oracle.cie.domain.WLSTemplateBuilder - No config-groups.xml found in template
    2014-04-02 14:11:17,556 INFO  [main] com.oracle.cie.domain.WLSTemplateBuilder - No template-database.xml found in template
    2014-04-02 14:11:18,205 INFO  [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: read template from "C:/Users/GZ/AppData/Local/Temp//tmp1396419069239wls.jar"
    2014-04-02 14:11:18,477 INFO  [main] com.oracle.cie.domain.script.ScriptExecutor - set config option ServerStartMode to "prod"
    2014-04-02 14:11:18,477 INFO  [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: set config option ServerStartMode to "prod"
    2014-04-02 14:11:18,490 INFO  [main] com.oracle.cie.domain.script.ScriptExecutor - create Machine "PC-42A26D.GZAD.MSAD.LOCAL" as obj0
    2014-04-02 14:11:18,604 INFO  [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: create Machine "PC-42A26D.GZAD.MSAD.LOCAL" as obj0
    2014-04-02 14:11:18,612 INFO  [main] com.oracle.cie.domain.script.ScriptExecutor - find Server "AdminServer" as obj1
    2014-04-02 14:11:18,652 INFO  [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: find Server "AdminServer" as obj1
    2014-04-02 14:11:18,698 INFO  [main] com.oracle.cie.domain.script.ScriptExecutor - set obj1 attribute Machine to "PC-42A26D.GZAD.MSAD.LOCAL"
    2014-04-02 14:11:18,705 INFO  [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: set obj1 attribute Machine to "PC-42A26D.GZAD.MSAD.LOCAL"
    2014-04-02 14:11:18,706 INFO  [main] com.oracle.cie.domain.script.ScriptExecutor - set obj1 attribute ListenPort to "7002"
    2014-04-02 14:11:18,716 INFO  [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: set obj1 attribute ListenPort to "7002"
    2014-04-02 14:11:18,716 INFO  [main] com.oracle.cie.domain.script.ScriptExecutor - create Server!SSL "AdminServer!AdminServer" as obj2
    2014-04-02 14:11:18,724 INFO  [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: create Server!SSL "AdminServer!AdminServer" as obj2
    2014-04-02 14:11:18,735 INFO  [main] com.oracle.cie.domain.script.ScriptExecutor - set obj2 attribute HostnameVerificationIgnored to "true"
    2014-04-02 14:11:18,739 INFO  [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: set obj2 attribute HostnameVerificationIgnored to "true"
    2014-04-02 14:11:18,739 INFO  [main] com.oracle.cie.domain.script.ScriptExecutor - find User "weblogic" as obj3
    2014-04-02 14:11:18,755 INFO  [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: find User "weblogic" as obj3
    2014-04-02 14:11:18,755 INFO  [main] com.oracle.cie.domain.script.ScriptExecutor - delete obj3
    2014-04-02 14:11:18,763 INFO  [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: delete obj3
    2014-04-02 14:11:18,764 INFO  [main] com.oracle.cie.domain.script.ScriptExecutor - create User "weblogic" as obj4
    2014-04-02 14:11:18,768 INFO  [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: create User "weblogic" as obj4
    2014-04-02 14:11:18,771 INFO  [main] com.oracle.cie.domain.script.ScriptExecutor - set obj1 attribute PeriodLength to "200000"
    2014-04-02 14:11:18,807 INFO  [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: set obj1 attribute PeriodLength to "200000"
    2014-04-02 14:11:18,807 INFO  [main] com.oracle.cie.domain.script.ScriptExecutor - set obj1 attribute IdlePeriodsUntilTimeout to "20"
    2014-04-02 14:11:18,815 INFO  [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: set obj1 attribute IdlePeriodsUntilTimeout to "20"
    2014-04-02 14:11:18,815 INFO  [main] com.oracle.cie.domain.script.ScriptExecutor - set obj1 attribute DGCIdlePeriodsUntilTimeout to "21"
    2014-04-02 14:11:18,821 INFO  [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: set obj1 attribute DGCIdlePeriodsUntilTimeout to "21"
    2014-04-02 14:11:18,822 INFO  [main] com.oracle.cie.domain.script.ScriptExecutor - set obj1 attribute IdleConnectionTimeout to "1000"
    2014-04-02 14:11:18,830 INFO  [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: set obj1 attribute IdleConnectionTimeout to "1000"
    2014-04-02 14:11:18,833 INFO  [main] com.oracle.cie.domain.script.ScriptExecutor - set obj4 attribute Password to "********"
    2014-04-02 14:11:18,837 INFO  [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: set obj4 attribute Password to "********"
    2014-04-02 14:11:18,837 INFO  [main] com.oracle.cie.domain.script.ScriptExecutor - set config option OverwriteDomain to "true"
    2014-04-02 14:11:18,837 INFO  [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: set config option OverwriteDomain to "true"
    2014-04-02 14:11:18,837 INFO  [main] com.oracle.cie.domain.script.ScriptExecutor - set config option JavaHome to "C:/Oracle/Middleware/jdk160_29"
    2014-04-02 14:11:18,837 INFO  [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: set config option JavaHome to "C:/Oracle/Middleware/jdk160_29"
    2014-04-02 14:11:18,948 INFO  [main] com.oracle.cie.domain.script.ScriptExecutor - validateConfig "KeyStorePasswords"
    2014-04-02 14:11:18,953 INFO  [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: validateConfig "KeyStorePasswords"
    2014-04-02 14:11:18,954 INFO  [main] com.oracle.cie.domain.script.ScriptExecutor - write Domain to "C:/Oracle/Middleware/user_projects/domains/base_domain"
    2014-04-02 14:11:19,441 INFO  [main] com.oracle.cie.domain.DomainChecker - ListenPort internal Validation result= [null]
    2014-04-02 14:11:19,441 INFO  [main] com.oracle.cie.domain.DomainChecker - ListenPort external Validation result= [null]
    2014-04-02 14:11:21,609 INFO  [Thread-1] com.oracle.cie.domain.StartMenu - Creating start menu program=C:\Oracle\Middleware\user_projects\domains\base_domain\bin\startWebLogic.cmd link=Start Admin Server for Weblogic Server Domain
    2014-04-02 14:11:21,659 INFO  [Thread-1] com.oracle.cie.domain.StartMenu - Creating start menu program=C:\Oracle\Middleware\user_projects\domains\base_domain\bin\stopWebLogic.cmd link=Stop Admin Server
    2014-04-02 14:11:21,667 INFO  [Thread-1] com.oracle.cie.domain.StartMenu - Creating start menu program=C:\Windows\system32\rundll32.exe link=Admin Server Console
    2014-04-02 14:11:21,759 INFO  [Thread-1] com.oracle.cie.domain.DomainRegistryWrapper - need to initialize domainRegistrydocument object
    2014-04-02 14:11:21,777 INFO  [Thread-1] com.oracle.cie.domain.DomainGenerator - Domain Generation Successful!
    2014-04-02 14:11:21,783 INFO  [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: write Domain to "C:/Oracle/Middleware/user_projects/domains/base_domain"
    2014-04-02 14:11:21,784 INFO  [main] com.oracle.cie.domain.script.ScriptExecutor - close template
    2014-04-02 14:11:21,784 INFO  [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: close template
    2014-04-02 14:11:21,784 INFO  [main] com.oracle.cie.domain.script.ScriptExecutor - read domain from "C:/Oracle/Middleware/user_projects/domains/base_domain"
    2014-04-02 14:11:21,967 INFO  [main] com.oracle.cie.domain.script.ScriptExecutor - succeed: read domain from "C:/Oracle/Middleware/user_projects/domains/base_domain"
    2014-04-02 14:11:21,967 INFO  [main] com.oracle.cie.domain.script.ScriptExecutor - add template C:/Oracle/Middleware/oracle_common/common/templates/applications/jrf_template_11.1.1.jar to domain
    2014-04-02 14:11:22,011 WARN  [main] com.oracle.cie.domain.template.dependency.TemplateSelectionTarget - Catalog does not have matching template for location C:\Users\GZ\AppData\Local\Temp\tmp1396419069239wls.jar
    2014-04-02 14:11:22,071 INFO  [main] com.oracle.cie.domain.WLSTemplateBuilder - No template-database.xml found in template
    2014-04-02 14:11:22,100 INFO  [main] com.oracle.cie.domain.WLSTemplateBuilder - No template-database.xml found in template
    2014-04-02 14:11:22,101 ERROR [main] com.oracle.cie.domain.ConfigGroupsEngine$ConfigTopology - Multiple definitions of server-group BI-ADF-ADMIN-SVR are not allowed
    2014-04-02 14:11:22,101 INFO  [main] com.oracle.cie.domain.script.ScriptExecutor - fail: add template C:/Oracle/Middleware/oracle_common/common/templates/applications/jrf_template_11.1.1.jar to domain
    2014-04-02 14:11:22,101 ERROR [main] com.oracle.cie.domain.script.ScriptExecutor - fail: add template C:/Oracle/Middleware/oracle_common/common/templates/applications/jrf_template_11.1.1.jar to domain
    com.oracle.cie.domain.ConfigGroupsException: Multiple definitions of server-group BI-ADF-ADMIN-SVR are not allowed
    at com.oracle.cie.domain.ConfigGroupsEngine$ConfigTopology.merge(ConfigGroupsEngine.java:2762)
    at com.oracle.cie.domain.ConfigGroupsEngine.mergeTopology(ConfigGroupsEngine.java:551)
    at com.oracle.cie.domain.ConfigGroupsEngine.merge(ConfigGroupsEngine.java:479)
    at com.oracle.cie.domain.AbstractTemplate.addConfigGroups(AbstractTemplate.java:314)
    at com.oracle.cie.domain.script.ScriptExecutor.addTemplate(ScriptExecutor.java:605)
    at com.oracle.cie.domain.script.jython.WLScriptContext.addTemplate(WLScriptContext.java:416)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.python.core.PyReflectedFunction.__call__(Unknown Source)
    at org.python.core.PyMethod.__call__(Unknown Source)
    at org.python.core.PyObject.__call__(Unknown Source)
    at org.python.core.PyInstance.invoke(Unknown Source)
    at org.python.pycode._pyx3.addTemplate$20(C:\Users\GZ\AppData\Local\Temp\WLSTOfflineIni364664194239939514.py:89)
    at org.python.pycode._pyx3.call_function(C:\Users\GZ\AppData\Local\Temp\WLSTOfflineIni364664194239939514.py)
    at org.python.core.PyTableCode.call(Unknown Source)
    at org.python.core.PyTableCode.call(Unknown Source)
    at org.python.core.PyFunction.__call__(Unknown Source)
    at org.python.pycode._pyx15.f$0(C:\Users\GZ\AppData\Local\Temp\tmp1396419069304.py:42)
    at org.python.pycode._pyx15.call_function(C:\Users\GZ\AppData\Local\Temp\tmp1396419069304.py)
    at org.python.core.PyTableCode.call(Unknown Source)
    at org.python.core.PyCode.call(Unknown Source)
    at org.python.core.Py.runCode(Unknown Source)
    at org.python.util.PythonInterpreter.execfile(Unknown Source)
    at weblogic.management.scripting.WLST.main(WLST.java:139)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at weblogic.WLST.main(WLST.java:29)

    hi user ...
    on windows there are some steps in front of installation and configuration.
    1) cleare the Windows Env (Path .. Programme x86 )
         no Blank in Path and so on
    2) insert into your local host file your server and IP Adress
    3) in Windows 32 setup of WLS is JDK included so you don't have to install the jdk in front of WLS
    4) verify if you are using the right installation medium (jdk 32 bit, wls 32 bit , fmw 32 bit
    in your OraInventory/logs directory is a *.out file for your installation please can you put this file in the forum
    is there a nodemanager up and running (if so please stop)
    Jan-Peter

  • Crossdomain with same domain names

    i am trying to load file into a container
    but i am getting this error
    * Security Sandbox Violation ***Connection to http://d2hitob8rnr1aj.cloudfront.net/img/ads/jivox/qualcomm_new_aug12_new.txt?clickTAG=htt p://ads.raaga.com/a.aspx&Task=Click halted - not permitted from http://d2hitob8rnr1aj.cloudfront.net/img/ads/jivox/Jivox22051201.swf?tfile=  http://d2hitob8rnr1aj.cloudfront.net/img/ads/jivox/qualcomm_new_aug12_new.txt&clickTAG=htt p://ads.raaga.com/a.aspx&Task=Click&ZoneID=203&CampaignID=779&AdvertiserID=60&BannerID=145 8&SiteID=1&RandomNumber=365839284&Keywords=
    but as you can see both are same domains what can be wrong,

    try using relative paths

  • Domain directory path different than unc path??

    GroupWise 8 new secondary on Linux
    things "looked right, but couldn't connect
    Checked "Display Object" in C-1 on the domain object and I see that the Domain directory path is wrong - it is not what the UNC path is.
    Where do I change it?? or do I need to copy the files from the "real" domain directory to the wrong one and change the unc path?
    This is a new empty secondary domain.
    Also the "Display Object" listing shows Unsafe = 3
    anything I need to worry about there?

    Originally Posted by dzanre
    kjhurni wrote:
    > Only because if the GWIA is down, it'll alert nobody (haha) because well,
    > the GWIA is down.
    Oh - but you don't want to use your GWIA for alerts. Monitor has its own
    SMTP mailer, so unless you HAVE to go through a relay host, monitor can
    alert you regardless of whether the system is down. I send my alerts to the
    smtp address of my phone.
    Danita
    Novell Knowledge Partner
    Moving GroupWise to Linux?
    Moving GroupWise
    Even better! Yes, we can send to the relay host and let it go wherever.
    I was just thinking that let's say a regional POA/MTA is having problems, that the delivery address for the notification should be an " internal" GW account.
    Obviously though, if the GWIA is having an issue we'd not know about it because it would try to deliver to the internal GW address and that has to go through the GWIA.
    Although with diff. groups I will see if I can put the GWIA/MTA into a special group that gets notified to like the blackberry or something (like a text message).

  • Adding a second Domain Controller

    ...ok, so what you're saying is, If I don't spread out the FSMO roles, when the primary DC fails, I will likely run into problems until I seize the FSMO roles and delegate them to the secondary DC? By spreading out the FSMO roles, I am creating less work for myself in the event of a failure?
    ...Having said that, it isn't critical that I spread out the FSMO roles, but, would benefit me in the event of failure from a time stand point?

    I'm sitting at about 95% completion... but before I click finish, I had a few questions...
    I have a physical domain controller and Site-A, I want to add a secondary Domain Controller to Site-A and run it as a Virtual Machine... just in case the first DC dies, my users can still authenticate while I restore it from backup...
    I'm essentially adding a new DC to the existing domain, Global Catalog, DNS... not read only...
    I don't understand FSMO... do I need to do anything? or can I literally just add the second DC to the existing domain, enter the IP of the new DC in the secondary DNS on all my workstations (or DHCP leases settings) and call it a day? 
    Thanks for the input.. .just trying to make sure I'm not going to hose my primary DC or fek something up and create more work for myself than necessary...
    This topic first appeared in the Spiceworks Community

  • RMAN-03009: failure of delete command on ... ORA-19606: Cannot copy or rest

    one server using 11.2.0.1.0 under Suse Linux
    configured catalog db, main db & jobs & ... almost everything with enterprise manager
    keep backups 14 days
    To make 14 full online dumps I had to aktive the archive mode and try to get rid of thoose unwanted additional files.
    Additional I make every night (less til no db activity) a dump and compress it myself.
    After some days the backupjob complain that it can not delete old files.
    EM / manage all backups / crosscheck all(
    CROSSCHECK BACKUPSET;
    CROSSCHECK COPY;
    sucessful
    EM / manage all backups / delete old backups
    DELETE NOPROMPT OBSOLETE;
    failed.
    script result
    Recovery Manager: Release 11.2.0.1.0 - Production on Tue Sep 7 17:20:55 2010
    Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
    RMAN>
    connected to target database: <SID> (DBID=773091283)
    RMAN>
    connected to recovery catalog database
    RMAN>
    echo set on
    RMAN> DELETE NOPROMPT OBSOLETE;
    RMAN retention policy will be applied to the command
    RMAN retention policy is set to recovery window of 14 days
    allocated channel: ORA_DISK_1
    channel ORA_DISK_1: SID=196 device type=DISK
    Deleting the following obsolete backups and copies:
    Type Key Completion Time Filename/Handle
    Control File Copy 3831 03-AUG-10 /opt/oracle/base/product/11gR1/db/dbs/snapcf_<SID>.f
    Backup Set 18750 23-AUG-10
    Backup Piece 18754 23-AUG-10 /srv/ora/data/flash_recovery_area/<SID>/backupset/2010_08_23/o1_mf_nnndf_BACKUP_<SID>CH0_673c0hbp_.bkp
    Backup Set 18751 23-AUG-10
    Backup Piece 18755 23-AUG-10 /srv/ora/data/flash_recovery_area/<SID>/backupset/2010_08_23/o1_mf_nnndf_BACKUP_<SID>CH0_673c0hbo_.bkp
    Backup Set 19479 24-AUG-10
    Backup Piece 19482 24-AUG-10 /tmp/o0lm3qh9_1_1
    Backup Set 19490 24-AUG-10
    Backup Set 20087 24-AUG-10
    Backup Piece 20089 24-AUG-10 /srv/ora/data/flash_recovery_area/<SID>/autobackup/2010_08_24/o1_mf_s_727891232_677n40r3_.bkp
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03009: failure of delete command on ORA_DISK_1 channel at 09/07/2010 17:20:57
    ORA-19606: Cannot copy or restore to snapshot control file
    exit;
    Recovery Manager complete.
    google found some questions, but not fittung answers.
    So far:
    - I checked the folder & users rights.
    - I found some /tmp/ files - yes I "backup" the backuped archivelogs to-delete files in /tmp - I only active archivelogmode so I can onlinebackup
    - I managed to login via rman and execute DELETE OBSOLETE manual - result above.
    - Actual I delete the set one by one to find the problem set. (delete backupset 12345 ) from the list manually.
    Some a good idea what went wrong?
    additional: Is there a way to let oracle delete the empy archvielog-directories after deleting the logs within?
    18:00- the command "RMAN> BACKUP CURRENT CONTROLFILE" also fails.
    Edited by: 793286 on 07.09.2010 09:00

    Meanwhile I managed to delete all backupsets one by one.
    The problem with $ORACLE_HOME/dbs/snapcf_<SID>.f persists.
    cd $ORACLE_HOME/dbs
    mv snapcf_<SID>.f snapcf_<SID>.f.bak
    # replaced actual dbsidname with <SID>
    RMAN> delete obsolete;
    RMAN retention policy will be applied to the command
    RMAN retention policy is set to recovery window of 14 days
    using channel ORA_DISK_1
    Deleting the following obsolete backups and copies:
    Type Key Completion Time Filename/Handle
    Control File Copy 3831 03-AUG-10 /opt/oracle/base/product/11gR1/db/dbs/snapcf_TARMED1P.f
    Do you really want to delete the above objects (enter YES or NO)? y
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03009: failure of delete command on ORA_DISK_1 channel at 09/08/2010 09:44:07
    ORA-19606: Cannot copy or restore to snapshot control file
    mv snapcf_<SID>.f.bak snapcf_<SID>.fRMAN> backup current controlfile;
    Starting backup at 08-SEP-10
    using channel ORA_DISK_1
    channel ORA_DISK_1: starting compressed full datafile backup set
    channel ORA_DISK_1: specifying datafile(s) in backup set
    including current control file in backup set
    channel ORA_DISK_1: starting piece 1 at 08-SEP-10
    channel ORA_DISK_1: finished piece 1 at 08-SEP-10
    piece handle=/srv/ora/data/flash_recovery_area/TARMED1P/backupset/2010_09_08/o1_mf_ncnnf_TAG20100908T095000_68gj1b2m_.bkp tag=TAG20100908T095000 comment=NONE
    channel ORA_DISK_1: backup set complete, elapsed time: 00:00:01
    Finished backup at 08-SEP-10
    Starting Control File and SPFILE Autobackup at 08-SEP-10
    piece handle=/srv/ora/data/flash_recovery_area/TARMED1P/autobackup/2010_09_08/o1_mf_s_729165003_68gj1d1b_.bkp comment=NONE
    Finished Control File and SPFILE Autobackup at 08-SEP-10
    RMAN> delete obsolete;
    RMAN retention policy will be applied to the command
    RMAN retention policy is set to recovery window of 14 days
    using channel ORA_DISK_1
    Deleting the following obsolete backups and copies:
    Type Key Completion Time Filename/Handle
    Control File Copy 3831 03-AUG-10 /opt/oracle/base/product/11gR1/db/dbs/snapcf_<SID>.f
    Do you really want to delete the above objects (enter YES or NO)? y
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03009: failure of delete command on ORA_DISK_1 channel at 09/08/2010 09:52:37
    ORA-19606: Cannot copy or restore to snapshot control file
    No different effect, if I changed the filename via 2nd terminal to .bak or not.
    RMAN> delete controlfilecopy 3831;
    will fail, if the file exists or not.
    Any chance to reset/kill that file?
    Is there a need to restart the dbms after rename the file?

  • Successful installation of 8iEE 8.1.7 on RedHat linux 7.2 but no luck with Oracle 9i

    Hi All,
    I've successfully installed Oracle8i EE version 8.1.7 on RedHat
    Linux 7.2. However, I have NOT had much luck installing Oracle
    9i version 9.0.1 on RedHat Linux 7.2. I am wondering if anyone
    in this forum has any luck installing Oracle 9i on RedHat Linux
    7.2. I am running Linux kernel 2.4.7-10.
    Now I am not trying to start a shouting match here; however, it
    seems to me that a person with any common sense would not run
    Oracle database on a Windows platform. Instead of running it
    on Windows platform, one would be much better off running it on
    Linux platform. I am currently Oracle EE 8.1.7 on an dual-Intel
    processor 266MHZ with 512MB of RAM with Linux as the Operating
    System. I have to say that the performance of the box is really
    solid. At the same time, I am also running Oracle EE 8.1.7 on
    an identical hardware system with Win2K server and I have to say
    that the performance system is really pitiful on this Win2k server.
    The windows box can only 1 instance at a time. If I try to have
    two instances running at the same time, the windows box just comes
    to a screeching halt. In contrast, the Linux box really rocks. In
    a testing environment, I have 3 instances running at the same time
    and the linux is barely breaking a sweat. I am getting maximum
    performance out of the linux box because I recompile the linux kernel
    to optimize the box to run Oracle database.
    Having said that, as an Oracle DBA newbie (with less than six months
    of Oracle DBA experience, the last ten years as a Cisco/Unix Engineer),
    I find it fascinating that Oracle is only certified to run on SUSE (may
    be I am wrong and someone can correct me on this one) when RedHat is
    probably the dominant Linux distro. It took three days to get Oracle 8i
    version 8.1.7 to install on RedHat Linux 7.2. Why Oracle is slowed to
    support Linux RedHat is something I just don't understand.
    OK, enough of venting my frustration, if anyone has successfully installed
    Oracle 9i EE version 9.0.1 on RedHat Linux 7.2, please share your knowledge.
    In the mean time, if anyone interested in obtaining instructions on howto
    install Oracle 8i version 8.1.7 on Redhat Linux 7.1/7.2, send me an email
    at [email protected] and I will send the instructions. The instructions
    are written specifically for "windows dummies" so it is very to read and
    follow. If you have been Unix for a long time, there will be instructions
    in there that are so easy some of you may ask why put those in there in the
    first place. My response would be: "windows dummies".
    Regards,
    Michael (david)

    I very much agree with you Oracle is working very much better on Unix/Linux than Windows BUT in many cases you are obliged to use windows ( in Case that My company high managment enforce it ) , I have installed 9i on Windows and Linux , I am herunder including the full details :
    ========================================================================
    Installing Oracle 9i on Linux
         Linux : Redhat 7.2
         Oracle : 9i Server EE 9.0.1.0.0
         RAM Used : 256 M Ram
         Hard Disk : IDE RAID
         Linux Kernel : 2.4.4-10
         JDK : Blackdown jdk118_v3 => downloaded from www.blackdown.org
         All shell here is the Bash shell ( Bourne again shell )
    1.     To run a shell script over Linux , just drag the shell file from the file manager and drop it to a shell window
         Be sure to have swap space of 400 M or more
         If the systems stop responding for some time , leave it , it will continue
         Be sure to make a stage area for the CDs # 2 , 3 only because you will start from the CD 1 but after going in the installation the CDROM freezes and refuses to open door to replace CD ,, in this case you will switch to the last 2 CDs from the stage area
         Make sure you have the following executables at /usr/bin : MAKE , AR , LD , NM , C for Unix that is installed during Linux installation from the distribution media
    Steps ( Root User ) :
    1.     be sure to have to have your server domain is like hostess.com.eg and you can be able to ping it
    &#61607;     open /etc/hosts
    &#61607;     add a line as follows ( for instance ) :
    &#61607;     192.168.0.11 hostess.com.eg hostess
    &#61607;     ping hostess.com.eg
    &#61607;     ping hostess
    &#61607;     ping 192.168.0.11
    &#61607;     be sure to have a replay for all of them
    2.     install JDK inside the /usr/local directory => after downloading the JDK you can easily decompress it but just clicking at it using the GUI
    3.     get to the / prompt
    4.     type ln s /usr/local/jdk118_v3 /usr/local/java
    5.     download binutil RBM from Redhat for version 7 of Linux to downgrade binutils for Linux 7.2 or you will encounter an error at the third CD set
    6.     download it from : ftp://ftp.redhat.com/pub/redhat/linux/7.0/en/os/i386/redhat/rpms/binutils-2.10.0.18-1.i386.rpm
    7.     run it as follows : rpm -Uvh force nodeps binutils-2.10.0.18-1.i386.rpm
    8.     change to /proc/sys/kernel
    9.     type cat sem
    10.     you will get : 250 32000 32 128
    &#61607;     250 => SEMMSL
    &#61607;     32000 => SEMMNS
    &#61607;     32 => SEMOPM
    &#61607;     128 => SEMMNI
    11.     you need to have the SEMOPM to be 128 , to do so , locate the file called sem open it replace the value of 32 with 128
    12.     type again cat sem to be sure of taking the required effect
    13.     after the installation ends just re-install the 7.2 utils again as follows :
    14.     rpm -Uvh force nodeps binutils-2.11.90.0.8-9.i386.rpm
    15.     you can find the last RPM at the 7.2 CD set
    16.     after downloading the Oracle files from the net you need to decompress it as follows (one step) :
    &#61607;     zcat linux9i_disk1.cpio.gz | cpio idmv
    &#61607;     zcat linux9i_disk2.cpio.gz | cpio idmv
    &#61607;     zcat linux9i_disk3.cpio.gz | cpio idmv
    17.     you can decompress them at 2 steps as follows :
    &#61607;     gunzip linux9i_disk1.cpio.gz
    &#61607;     gunzip linux9i_disk2.cpio.gz
    &#61607;     gunzip linux9i_disk3.cpio.gz
    &#61607;     cpio idmv < linux9i_disk1.cpio
    &#61607;     cpio idmv < linux9i_disk2.cpio
    &#61607;     cpio idmv < linux9i_disk3.cpio
    18.     Now you have 3 directories , have care when Burning them to CD because you need to take care of paths
    19.     if you have downloaded the files via a Windows machine and have a MKS installed over it you can easily invoke Visual Pax and decompress the files at one go using the GUI program
    20.     log on to Linux as Root and run commands in the file commands.txt
    21.     log on as user Oracle to be sure that its created
    22.     log on as root again
    23.     get to the directory of /home/oracle
    24.     enable showing the system files
    25.     open the file of .bash_profile
    26.     add the accompanied bash file contents at the end of it to set the environment variables
    27.     log on as user Oracle
    28.     open shell and type set and be sure that environment variables are set correctly
    29.     open shell and change to the cdrom by typing cd /mnt/cdrom => Linux 7.2 is an auto mounting OS so you at no need to mount the CD drive prior to using it and if you need to mount it just type : AS ROOT
    &#61607;     mount t iso9660 /mnt/cdrom /cdrom
    &#61607;     this is surly after creating a directory at / called cdrom
    30.     Start the installer ( as Oracle User ) by typing ./runinstaller
    31.     the installer will ask you to run a started script as root , you may open a shell and type su then open Nautilus ( if using Gnome or File manager as super user if using KDE ) and drag the noted file to the shell screen and press enter ,, after it is ended continue with the installer
    32.     if asked to supply JDK home directory then it is /usr/local/java
    33.     Unix group Name ( to update Oracle software ) : oinstall
    34.     Oracle home is : /oracle/9.0.1
    35.     base directory : /oracle/orainventory
    Hisham Nagia
    IT Manager / OCP DBA
    Hostess Egypt / EFG-Hermes - CIIC

  • Oracle Enterprise Repository

    Hi All,
    We are installing OER on weblogic. we successlly installed it, but we are unable to create Domain
    weare facing below issue
    2010-08-05 18:05:54,128 INFO [WizardController] com.oracle.cie.domain.template.catalog.impl.ComponentsXMLConverter - /apps/erikas3/aerikas3/u01/app/oracle/product/fmw/wlserver_10.3/common/lib/components.xml does not contain component elements and will be skipped
    2010-08-05 18:05:54,254 INFO [WizardController] com.oracle.cie.wizard.domain.gui.tasks.MultipleTemplateSelectionGUITask - Selected required template: Basic WebLogic Server Domain:10.3.3.0 [apps/erikas3/aerikas3/u01/app/oracle/product/fmw/wlserver_10.3/common/templates/domains/wls.jar]
    2010-08-05 18:06:54,682 INFO [WizardController] com.oracle.cie.domain.WLSTemplateBuilder - No config-groups.xml found in template
    2010-08-05 18:06:54,691 INFO [WizardController] com.oracle.cie.domain.WLSTemplateBuilder - No template-database.xml found in template
    2010-08-05 18:06:58,319 INFO [WizardController] com.oracle.cie.domain.AbstractTemplate - Adding top-level component reference: WebLogic Server version 10.3.3.0
    2010-08-05 18:06:58,339 INFO [WizardController] com.oracle.cie.domain.AbstractTemplate - Setting symbol for component WebLogic Server version 10.3.3.0 to WebLogic_Server_10.3.3.0_wlserver_10.3_ORACLE_HOME
    2010-08-05 18:06:59,229 INFO [WizardController] com.oracle.cie.domain.WLSTemplateBuilder - No template-database.xml found in template
    2010-08-05 18:06:59,611 WARN [WizardController] com.oracle.cie.domain.AbstractTemplate - Could not find component name 'Oracle Enterprise Repository' version 'null'
    2010-08-05 18:06:59,612 INFO [WizardController] com.oracle.cie.domain.AbstractTemplate - Replacing component reference Oracle Enterprise Repository version null with top-level component reference: WebLogic Server version 10.3.3.0
    2010-08-05 18:06:59,612 INFO [WizardController] com.oracle.cie.domain.AbstractTemplate - Setting symbol for component WebLogic Server version 10.3.3.0 to WebLogic_Server_10.3.3.0_wlserver_10.3_ORACLE_HOME
    2010-08-05 18:06:59,813 WARN [WizardController] com.oracle.cie.domain.aspect.XBeanConfigAspect - Unable to locate property:Target on type:class com.oracle.cie.domain.xml.configxb.impl.MachineTypeImpl
    2010-08-05 18:06:59,864 WARN [WizardController] com.oracle.cie.domain.aspect.XBeanConfigAspect - Unable to locate property:Target on type:class com.oracle.cie.domain.xml.configxb.impl.ServerTypeImpl
    2010-08-05 18:07:52,628 ERROR [WizardController] com.oracle.cie.common.util.JdkVersion - JDK version is null.
    2010-08-05 18:10:26,218 INFO [WizardController] com.oracle.cie.domain.assignment.ServerMachineAssignment - ListenPort internal Validation result= [null]
    2010-08-05 18:10:51,639 INFO [WizardController] com.oracle.cie.domain.assignment.ServerMachineAssignment - ListenPort internal Validation result= [null]
    2010-08-05 18:10:55,139 INFO [WizardController] com.oracle.cie.domain.DomainChecker - ListenPort external Validation result= [null]
    2010-08-05 18:11:32,465 ERROR [create_gui] com.oracle.cie.wizard.domain.gui.tasks.DomainCreationGUITask - Generation Error!!
    Traceback (innermost last):
    (no code object) at line 0
    SyntaxError: ('Lexical error at line 6, column 11. Encountered: "@" (64), after : ""', ('<iostream>', 6, 11, 'oerPort = @DOMAIN_LISTEN_PORT@'))
         at org.python.core.parser.fixParseError(Unknown Source)
         at org.python.core.parser.parse(Unknown Source)
         at org.python.core.Py.compile_flags(Unknown Source)
         at org.python.util.PythonInterpreter.execfile(Unknown Source)
         at org.python.util.PythonInterpreter.execfile(Unknown Source)
         at com.oracle.cie.domain.script.ScriptHelper.executeEmbeddedTemplateScript(ScriptHelper.java:1571)
         at com.oracle.cie.domain.DomainChecker.executeEmbeddedScript(DomainChecker.java:1322)
         at com.oracle.cie.domain.DomainChecker.runCustomWLSTScript(DomainChecker.java:1305)
         at com.oracle.cie.domain.DomainChecker.preprocessOutput(DomainChecker.java:143)
         at com.oracle.cie.domain.DomainGenerator.generate(DomainGenerator.java:269)
         at com.oracle.cie.wizard.domain.gui.tasks.DomainCreationGUITask$1.run(DomainCreationGUITask.java:216)

    Hi,
    Once before you install OER u need to create some Table spaces for OER and some default OER user for Installation and that from the log i understood tat you are trying to create the Domain from an existing WLS Template.
    Once u run the scripts for OER User schemas and Tablespaces and OER user then reinstall OER and then try to create the DOmian with SOA and OER.
    Correct me if i m wrong..
    Thanks and Regards,
    Ramnath

  • Oracle Enterprise Repository post installation steps failed.

    Hi,
    I was able to install Oracle 11g Express and Weblogic 10.3.6.0 and 11.1.1.6.0 and when try to follow post installation steps to extend a domain installation fails with following steps. Could you please assist me
    what could i have done wrong or suggest me hints to locate the error.
    2013-01-30 23:08:04,768 INFO [WizardController] com.oracle.cie.domain.template.catalog.impl.ComponentsXMLConverter - C:\Oracle\Middleware\wlserver_10.3\common\lib\components.xml does not contain component elements and will be skipped
    2013-01-30 23:08:11,830 INFO [WizardController] com.oracle.cie.wizard.domain.gui.tasks.MultipleTemplateSelectionGUITask - Selected required template: Basic WebLogic Server Domain:10.3.6.0 [C:\Oracle\Middleware\wlserver_10.3\common\templates\domains\wls.jar]
    2013-01-30 23:08:15,362 INFO [WizardController] com.oracle.cie.domain.WLSTemplateBuilder - No template-database.xml found in template
    2013-01-30 23:08:15,471 WARN [WizardController] com.oracle.cie.domain.AbstractTemplate - Could not find component name 'Oracle Enterprise Repository' version 'null'
    2013-01-30 23:08:15,471 INFO [WizardController] com.oracle.cie.domain.AbstractTemplate - Replacing component reference Oracle Enterprise Repository version null with top-level component reference: WebLogic Server version 10.3.6.0
    2013-01-30 23:08:15,471 INFO [WizardController] com.oracle.cie.domain.AbstractTemplate - Setting symbol for component WebLogic Server version 10.3.6.0 to WebLogic_Server_10.3.6.0_wlserver_10.3_ORACLE_HOME
    2013-01-30 23:08:27,096 INFO [WizardController] com.oracle.cie.domain.assignment.ServerMachineAssignment - ListenPort internal Validation result= [null]
    2013-01-30 23:08:28,737 INFO [WizardController] com.oracle.cie.domain.DomainChecker - ListenPort external Validation result= [null]
    2013-01-30 23:08:32,580 ERROR [create_gui] com.oracle.cie.wizard.domain.gui.tasks.DomainCreationGUITask - Generation Error!!
    Traceback (innermost last):
    (no code object) at line 0
    SyntaxError: ('Lexical error at line 6, column 11. Encountered: "@" (64), after : ""', ('<iostream>', 6, 11, 'oerPort = @DOMAIN_LISTEN_PORT@'))
         at org.python.core.parser.fixParseError(Unknown Source)
         at org.python.core.parser.parse(Unknown Source)
         at org.python.core.Py.compile_flags(Unknown Source)
         at org.python.util.PythonInterpreter.execfile(Unknown Source)
         at org.python.util.PythonInterpreter.execfile(Unknown Source)
         at com.oracle.cie.domain.script.ScriptHelper.executeEmbeddedTemplateScript(ScriptHelper.java:1574)
         at com.oracle.cie.domain.DomainChecker.executeEmbeddedScript(DomainChecker.java:1322)
         at com.oracle.cie.domain.DomainChecker.runCustomWLSTScript(DomainChecker.java:1305)
         at com.oracle.cie.domain.DomainChecker.preprocessOutput(DomainChecker.java:143)
         at com.oracle.cie.domain.TemplateImporter.generate(TemplateImporter.java:274)
         at com.oracle.cie.wizard.domain.gui.tasks.DomainCreationGUITask$1.run(DomainCreationGUITask.java:216)
    Thanks
    Edited by: 985275 on Jan 31, 2013 12:13 AM

    Hi,
    After installing Oracle DB, did you Install RCU setup succesfully??
    If not, Install RCU and then procced.
    -Santosh

Maybe you are looking for

  • Page break/empty page issue

    Hi, I have big report with 4 data sections. This is the structure of the report. Main Frame --> Repeating Frame -->Frame1 - PageBreak After - Yes Some Fields -->Frame2 - PageBreak After - Yes Some Fields --> Repeating Frame -->Frame3 - PageBreak Afte

  • Signing out and back in does not fix CC apps crashing on launch problem.

    I have installed Illustrator CC, Indesign CC, and Photoshop CC. All three of these crash upon launch. Sometimes they go unresponsive during the loading screen, sometimes they get past that but crash within seconds before I can even try to use it. I'm

  • Help required in BDC for Vendor creation

    Hi ,      I have to create vendors using bdc via trxn FK01. my requirement is to add multiple street adress but while recording initial screen contains only one line for street. how should i proceed ? I am working in ecc6.0.given below is my BDC. per

  • Unable to create partition from free space on hard drive

    I have a segment of free space on my Macbook Air's hard drive. It was formerly a Bootcamp partition. When I try to create a new partition from this free space in Disk Utility, it prompts me to start creating the partition, but nothing happens after t

  • My settings keep resetting no matter what I try

    I have been having a couple problems with my settings. It has happened a few times already, this time it started with iTunes, and it started like i just reinstalled, then it moved to Safari, and caused the setting to go back to factory setting. Now I