Svchost.exe processor utilisation more than 50%

Hi, in two systems one is windows 2008 32bit and 64bit we are facing issue that svchost.exe is utilizing proc more than 50%. Both systems are updated with the windows updates.
Please help.

Hi,
The SVCHOST can registered many service if necessary, any of this service may cause the svchost service high CPU, therefore the quick method is uninstall the recently installed
new software, if it not work you can refer the following example article for the further troubleshooting.
The related article:
How to troubleshoot Service Host (svchost.exe) related problems?
http://blogs.technet.com/b/yongrhee/archive/2012/06/28/how-to-troubleshoot-service-host-svchost-exe-related-problems.aspx
PRF: High CPU (SVCHOST.EXE)
http://blogs.technet.com/b/askperf/archive/2009/04/10/prf-high-cpu-svchost-exe.aspx
Getting Started with SVCHOST.EXE Troubleshooting
http://blogs.technet.com/b/askperf/archive/2008/01/11/getting-started-with-svchost-exe-troubleshooting.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

  • Win32_Processor CPUSTATUS shows ideal where logical processors utilization more than 20%.

    Trying to collect CPU’s status by using Win32_processor WMI. 
    In this, one of the processor CPU status always shows ideal (4) but logical processor usage is more than 20% when checking in Task manger.
    Is there any reason behind CPU status (Win32_processor), Why it is always show the value 4 (Ideal).
    CPU status – win32_processor
    CpuStatus
    Data type:
    uint16
    Access type: Read-only
    Current status of the processor. Status changes indicate processor usage, but not the physical condition of the processor.
    Value
    Meaning
    0 (0x0)
    Unknown
    1 (0x1)
    CPU Enabled
    2 (0x2)
    CPU Disabled by User via BIOS Setup
    3 (0x3)
    CPU Disabled by BIOS (POST Error)
    4 (0x4)
    CPU Is Idle
    5 (0x5)
    Reserved
    6 (0x6)
    Reserved
    7 (0x7)
    Other
    Server: windows 2003 enterprise
    Processor#: 2 (Dual core)  
    WMI code:
    strServer = "."
    Set objWMI = GetObject("winmgmts://" & strServer & "/root\cimv2")
    Set objInstances = objWMI.InstancesOf("Win32_Processor",48)
    On Error Resume Next
    Wscript.echo "CPU_Status     
    Status             
    Info"
    For Each objInstance in objInstances
    WScript.Echo objInstance.CpuStatus & vbtab & objInstance.Status & vbtab & objInstance.StatusInfo
    On Error Goto 0
    Next

    Hi Sir,
    Sorry for the delay .
    But I have tested all servers in my lab , they are all showing "1 (0x1)CPU Enabled" .
    Best Regards,
    Elton Ji
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

  • Lenovo Ideapas s205 very hot - more than 65 C

    Hello, pals!
    (First, please - excuse me for my bad english, it's not my native language)
    I have a little problems with my s205 netbook - it's processor warming more than 65 C after 5 minutes of work. Just now, I start browser and open Speccy to control temperature:
    Well, it's not a big deal, cause a notebook works stable, but it become (ii think so) slower and I worried about it "health". I don't check it's temperature before, so I don't know - maybe it's normal? 
    Some time before I hear strange metal noise inside it and decide check it. I found that small aluminium plate was a reason of that noise (on photo I've already stick it to some place that i think is right for that plate):
    Link to picture
    I found only one chip, that was not covered with other things, and think that it's a some kind of heatsink (there also was a little piece of gray gum - i think it's thermal grease or something like that). Well, i put them together and stick to the chip, cause not find any place to screw it to board.
    Link to picture
    Photo of whole motherboard:
    Link to picture
    Please, tell me - is there any problem with my notebook? It's fan is working, but I think it's overheatead. 
    I will be grateful for any help!
    Moderator note; picture(s) converted to link(s) About Posting Pictures In The Forums

    Hi Deromanenko,
    Welcome to Lenovo Community!
    I sorry to hear that your S205 Laptop is getting overheated, this might have also happened if the Thermal Paste is dried up because of its continuous usage and as the Fan is running as expected. Hence, I would strongly suggest you to contact our Technical Support for further Assistance to get the details of the nearest Authorized Service Center to get the issue analyzed.
    Click here to open a link where you can select the country and get the exact contact support number. I’m sure they will be a great help.
    Do post us back for further queries.
    Best Regards
    Shiva Kumar
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Can there be more than on "saplogon.exe" process in a session context?

    Hi,
    Does anyone know if there can be only a single saplogon.exe process in a windows session (i.e u2013 terminal service session)?  Is it possible to have more than one saplogon.exe process in a session? If so under what conditions?
    Thanks.

    Thanks for the answer Sven, it was very helpful.
    If only one saplogon process is possible for user, is it possible for more than one user to logon to sap in single window session?   So more than one saplogon.exe will be created in single windows session?
    (I currently have only trial version of SAP with single user, so i can't test this scenario myself).
    Thanks.

  • Error: 1012704 Dynamic Calc processor cannot lock more than [25] ESM blocks

    Dear All,
    I get the Following Error in the Essbase console when I try to Execute any CalcScript.
    Error: 1012704 Dynamic Calc processor cannot lock more than [25] ESM blocks during the calculation, please increase CalcLockBlock setting and then retry(a small data cache setting could also cause this problem, please check the data cache size setting)_+
    Please find the detailed output of the Statics of my Planning Applications Database and outline.
    please help guys........
    GetDbStats:
    -------Statistics of AWRGPLAN:Plan1 -------
    Dimension Name Type Declared Size Actual Size
    ===================================================================
    HSP_Rates SPARSE 11 11
    Account DENSE 602 420
    Period DENSE 19 19
    Year SPARSE 31 31
    Scenario SPARSE 6 6
    Version SPARSE 4 4
    Currency SPARSE 10 10
    Entity SPARSE 28 18
    Departments SPARSE 165 119
    ICP SPARSE 80 74
    LoB SPARSE 396 344
    Locations SPARSE 57 35
    View SPARSE 5 5
    Number of dimensions : 13
    Declared Block Size : 11438
    Actual Block Size : 7980
    Declared Maximum Blocks : 3.41379650304E+015
    Actual Maximum Blocks : 1.87262635317E+015
    Number of Non Missing Leaf Blocks : 10664
    Number of Non Missing Non Leaf Blocks : 2326
    Number of Total Blocks : 12990
    Index Type : B+ TREE
    Average Block Density : 0.01503759
    Average Sparse Density : 6.936782E-010
    Block Compression Ratio : 0.001449493
    Average Clustering Ratio : 0.3333527
    Average Fragmentation Quotient : 19.3336
    Free Space Recovery is Needed : No
    Estimated Bytes of Recoverable Free Space : 0
    GetDbInfo:
    ----- Database Information -----
    Name : Plan1
    Application Name : AWRGPLAN
    Database Type : NORMAL
    Status : Loaded
    Elapsed Db Time : 00:00:05:00
    Users Connected : 2
    Blocks Locked : 0
    Dimensions : 13
    Data Status : Data has been modified
    since last calculation.
    Data File Cache Size Setting : 0
    Current Data File Cache Size : 0
    Data Cache Size Setting : 3128160
    Current Data Cache Size : 3128160
    Index Cache Size Setting : 1048576
    Current Index Cache Size : 1048576
    Index Page Size Setting : 8192
    Current Index Page Size : 8192
    Cache Memory Locking : Disabled
    Database State : Read-write
    Data Compression on Disk : Yes
    Data Compression Type : BitMap Compression
    Retrieval Buffer Size (in K) : 10
    Retrieval Sort Buffer Size (in K) : 10
    Isolation Level : Uncommitted Access
    Pre Image Access : No
    Time Out : Never
    Number of blocks modified before internal commit : 3000
    Number of rows to data load before internal commit : 0
    Number of disk volume definitions : 0
    Currency Info
    Currency Country Dimension Member : Entity
    Currency Time Dimension Member : Period
    Currency Category Dimension Member : Account
    Currency Type Dimension Member :
    Currency Partition Member :
    Request Info
    Request Type : Data Load
    User Name : admin@Native Directory
    Start Time : Mon Aug 15 18:35:51 2011
    End Time : Mon Aug 15 18:35:51 2011
    Request Type : Customized Calculation
    User Name : 6236@Native Directory
    Start Time : Tue Aug 16 09:44:10 2011
    End Time : Tue Aug 16 09:44:12 2011
    Request Type : Outline Update
    User Name : admin@Native Directory
    Start Time : Tue Aug 16 10:50:02 2011
    End Time : Tue Aug 16 10:50:02 2011
    ListFiles:
    File Type
    Valid Choices: 1) Index 2) Data 3) Index|Data
    >>Currently>> 3) Index|Data
    Application Name: AWRGPLAN
    Database Name: Plan1
    ----- Index File Information -----
    Index File Count: 1
    File 1:
    File Name: C:\Oracle\Middleware\user_projects\epmsystem1\EssbaseServer\essbaseserver1\APP\AWRGPLAN\Plan1\ess00001.ind
    File Type: INDEX
    File Number: 1 of 1
    File Size: 8,024 KB (8,216,576 bytes)
    File Opened: Y
    Index File Size Total: 8,024 KB (8,216,576 bytes)
    ----- Data File Information -----
    Data File Count: 1
    File 1:
    File Name: C:\Oracle\Middleware\user_projects\epmsystem1\EssbaseServer\essbaseserver1\APP\AWRGPLAN\Plan1\ess00001.pag
    File Type: DATA
    File Number: 1 of 1
    File Size: 1,397 KB (1,430,086 bytes)
    File Opened: Y
    Data File Size Total: 1,397 KB (1,430,086 bytes)
    File Size Grand Total: 9,421 KB (9,646,662 bytes)
    GetAppInfo:
    -------Application Info-------
    Name : AWRGPLAN
    Server Name : GITSHYPT01:1423
    App type : Non-unicode mode
    Application Locale : English_UnitedStates.Latin1@Binary
    Status : Loaded
    Elapsed App Time : 00:00:05:24
    Users Connected : 2
    Data Storage Type : Multidimensional Data Storage
    Number of DBs : 3
    List of Databases
    Database (0) : Plan1
    Database (1) : Plan2
    Database (2) : Plan3

    ESM Block Issue
    Cheers..!!

  • Dynamic Calc processor cannot lock more than [100] ESM blocks during the calculation, please increase CalcLockBlock setting and then retry(a small data cache setting could also cause this problem, please check the data cache size setting).

    Hi,
    Our Environment is Essbase 11.1.2.2 and working on Essbase EAS and Shared Services components.One of our user tried to run the Cal Script of one Application and faced this error.
    Dynamic Calc processor cannot lock more than [100] ESM blocks during the calculation, please increase CalcLockBlock setting and then retry(a small data cache setting could also cause this problem, please check the data cache size setting).
    I have done some Google and found that we need to add something in Essbase.cfg file like below.
    1012704 Dynamic Calc processor cannot lock more than number ESM blocks during the calculation, please increase CalcLockBlock setting and then retry (a small data cache setting could also cause this problem, please check the data cache size setting).
    Possible Problems
    Analytic Services could not lock enough blocks to perform the calculation.
    Possible Solutions
    Increase the number of blocks that Analytic Services can allocate for a calculation:
    Set the maximum number of blocks that Analytic Services can allocate to at least 500. 
    If you do not have an $ARBORPATH/bin/essbase.cfg file on the server computer, create one using a text editor.
    In the essbase.cfg file on the server computer, set CALCLOCKBLOCKHIGH to 500.
    Stop and restart Analytic Server.
    Add the SET LOCKBLOCK HIGH command to the beginning of the calculation script.
    Set the data cache large enough to hold all the blocks specified in the CALCLOCKBLOCKHIGH setting. 
    Determine the block size.
    Set the data catche size.
    Actually in our Server Config file(essbase.cfg) we dont have below data  added.
    CalcLockBlockHigh 2000
    CalcLockBlockDefault 200
    CalcLockBlocklow 50
    So my doubt is if we edit the Essbase.cfg file and add the above settings and restart the services will it work?  and if so why should we change the Server config file if the problem is with one application Cal Script. Please guide me how to proceed.
    Regards,
    Naveen

    Your calculation needs to hold more blocks in memory than your current set up allows.
    From the docs (quoting so I don't have to write it, not to be a smarta***:
    CALCLOCKBLOCK specifies the number of blocks that can be fixed at each level of the SET LOCKBLOCK HIGH | DEFAULT | LOW calculation script command.
    When a block is calculated, Essbase fixes (gets addressability to) the block along with the blocks containing its children. Essbase calculates the block and then releases it along with the blocks containing its children. By default, Essbase allows up to 100 blocks to be fixed concurrently when calculating a block. This is sufficient for most database calculations. However, you may want to set a number higher than 100 if you are consolidating very large numbers of children in a formula calculation. This ensures that Essbase can fix all the required blocks when calculating a data block and that performance will not be impaired.
    Example
    If the essbase.cfg file contains the following settings:
    CALCLOCKBLOCKHIGH 500  CALCLOCKBLOCKDEFAULT 200  CALCLOCKBLOCKLOW 50 
    then you can use the following SET LOCKBLOCK setting commands in a calculation script:
    SET LOCKBLOCK HIGH; 
    means that Essbase can fix up to 500 data blocks when calculating one block.
    Support doc is saying to change your config file so those settings can be made available for any calc script to use.
    On a side note, if this was working previously and now isn't then it is worth investigating if this is simply due to standard growth or a recent change that has made an unexpected significant impact.

  • Install more than one exe into one folder or into some subfolders of the same folder

    Hi!
    I want to do at least one of the following:
    1. I want to install several exes (built with LV app builder) into one directory because they belong together.
    2. Make several subfolders under the same top level folder aand install exes into each of them.
    The (top level) folder should be the "company" folder. The subfolders are for the applications.
    For example:
    c:\company\app1\app1.exe
    c:\company\app1\app1setup.exe
    c:\company\app2\app2.exe
    etc.
    This may also reside under the "program files" folder.
    If i try to do so, i encounter some problems setting up the build specifications. If i have more than one build spec. for exes i cannot add them to the same folder. At least if they contain the same external files, e.g. dlls.
    If i try to make one installer per exe, i get an error message telling me that the same folder (my "top level folder") already exists in the registry and cannot be added a second time. This is also true if i try to make a new project instead of having several installer build specs in one project.
    I use Labview 2009 (engl.) under Windows Vista (german).
    If anyone has some help for me or encounters similar problems please let me know.
    Holger
    Message Edited by HolgerD on 09-26-2009 10:13 AM
    Solved!
    Go to Solution.

    Hi Holger,
    the build directories should be different for each build, but you can copy the executables into one folder manually (tested successfully in WinXP). For multiple installers, put each installer build in a separate directory, and install all to the same program files subfolder. Works with XP (tested!), so this must be a Vista issue...
    Please build the four specs in attached project and run both installers to the same directory - should be working...
    Best regards,
    Sebastian
    Attachments:
    calc.dll.zip ‏73 KB

  • Jstart process in PI is running with more than 90% utilisation

    Hi ,
    jstart process in PI - java is running with more than 90% utilisation CPU utilisation.
    But when i check  jsmon the jstart PID is something else.can there be more than one jstart processes running.
    And how to correct this high CPU utilisation of the that particular jstart process.
    Regards,
    balaji.R

    Hi Balaji,
    To analyze this kind of issue you should follow note 742395.
    It is quite simple to detect what is causing the high cpu:
    1. Find the thread that is consuming the CPU (in the note you can see how to do it for all the OS)
    2. Take a thread dump in the JVM.
    Now you just need to find in the thread dump you took from the JVM the thread and see what he was doing in the thread dump.
    In this way you can search this thread for notes to see if it is a bug or something like that and fix it.
    I hope it helps.
    Thanks,
    Anderson

  • I'm unable to install the newest version of itunes on my pc, the promt says that there is a problem with the windows installer package, but I have downloaded the exe more than once. Is anyone able to help?

    I'm unable to install the newest version of itunes on my pc, the promt says that there is a problem with the windows installer package, but I have downloaded the exe more than once. Is anyone able to help?

    Yes, I had found a similar solution also.  I'm running XP Pro, SP3.  I went Control Panels/ Add-Remove programmes/apple software update/ change/ repair.  Then run the 10.5 exe.
    While the programme updated from version 8 of iTunes, my new iTunes is now a mess.  Not all of my music was in the same folder previously but it all showed up on iTunes.  Now many albums have been left out, some have only a few tracks and some have two copies of some tracks as well as having other tracks missing.  I haven't begun to work on that.

  • Services.exe - high memory utlization (more than a GB)...? in ADC

    Hi,
    Services.exe eating up more memory (60-75% of RAM) in windows 2003 server.
    Server details:Its just a ADC server and no other roles and application are installed...? but i am facing lot of memory usage of serverices.exe since one month.
    Kindly suggest how to overcome this... 
    Thnaks in advance.
    Dev Ben

    Hi Dev,
    Thanks for your update.
    This issue may cause by the SecEvent.Evt corrupted. In order to troubleshoot, please try to manually delete the SecEvent.Evt file.
    Steps:
    ======================
    1. Click
    Start, click Run, type services.msc, and then click
    OK.
    2. Select the
    EventLog service and click Startup. Change the Startup Type to
    Disabled, click OK.
    3. Restart Windows.
    Note: When the system starts up, several services may fail.
    4. Rename or delete the corrupte SecEvent.Evt file from the location:
    %systemRoot%\System32\Config
    5. Re-enable the
    EventLog service and change type to Automatic.
    6. Restart server to see if the issue still persists.
    How to Delete Corrupt Event Viewer Log Files
    http://support.microsoft.com/kb/172156
    Best Regards,
    Aiden

  • Svchost.exe slowing down my system terribly

    svchost.exe slowing down my system terribly. I ran the Kapersky program and no virus files came up. I am getting desperate. I am ready to kill my computer. Why is this process such a hog and how can I stop it?

    To find what is causing your computer to use more CPU than it normally does you need to run this. 
    Install the WPT (windows Performance Toolkit) http://social.technet.microsoft.com/wiki/contents/articles/4847.install-the-windows-performance-toolkit-wpt.aspx  , 
    Open a CMD prompt with administrative rights (right click it>run as admin) and run this command for 60 secs to capture the high cpu usage: 
    xperf -on latency -stackwalk profile -buffersize 1024 -MaxFile 256 -FileMode Circular && timeout -1 && xperf -d cpuusage.etl
    The trace will run and give you a warning then revert to a C:\ prompt
    The log will be in C:\windows\system32. 
    It should be called cpuusage.etl
    Please zip the file and upload it to skydrive (or another file sharing service) and put a link to it in your next post.
    Wanikiya and Dyami--Team Zigzag

  • Router continually accessing svchost.exe, cycling through all ports

    Hi,
    I recently did a clean install of Windows XP, since then my firewall (ZoneAlarm) has been continually blocking access attempts made by my router (WRT54G) to access svchost.exe, as shown here:
    http://img28.imageshack.us/img28/9425/89700028.png
    My router has a wired connection to my PC and by disconnecting the wire the access attempts stop. I don't know what is causing this or how to resolve the issue. So far I've only tried hard-resetting the router, which didn't help.
    Any help would be appreciated

    Firstly, thanks a lot for your help, I appreciate it.
    Secondly, I'm reasonably sure that the problem isn't malware. Like I said in my first post, I only did a clean install of WinXP yesterday and since then I've only updated to SP3 and installed Firefox, ZoneAlarm, AVG, Adobe Reader and Flash. Just incase I just installed and ran Malwarebytes and Hijackthis and I couldn't see anything out of the ordinary. Of course I want to make sure that it isn't malware.
    I've done what you said (this version of WinXP doesn't have tasklist apparently but I downloaded "Process Explorer" which serves the same function) and tried to find the process which needs those ports. The problem is that the ports accessed began at 10xx and continued all the way up to 25xx and probably would continue beyond. The svchosts with PIDs running in that range are running about 20 services... I'm not sure how I can find which service is causing the specific problem. I'm not even sure what services should be provided in the normal running of Windows.
    e.g. termsrv.dll -  Remote Desktop Session Host Server Remote Connections Manager
    rpcss.dll - Remote Procedure Call (two instances of this running under two different svchost processes)
    ssdpsrv.dll - permits discovery of UPnP devices on your home network
    Should all of these be running normally as part of Windows? And seaching all of these processes on Google says that they COULD be a trojan/malware but I don't know how I could find out which are (outside of virus scanning - which I've already done). All are located in the windows/system32/ folder which makes me think they're not anything untoward but, again, I don't know for sure.
    I appreciate that you can't help any more than you have but given everything I've tried is there anything else that I can do?
     Thanks again.
    Message Edited by LennethValkyrie on 03-09-2010 02:34 PM

  • Windows Server 2012R2 - svchost.exe 60-100% load!

    We are using RDS collection with two Windows Server 2012R2 session hosts. Both hosts are virtual servers (clean installation) and are used as session hosts (terminals) with 10 to 25 users each. RDS Connection Broker is also virtual machine with Windows
    Server 2012 R2. Our users are using Windows 7 Embedded thin clients with MSTSC RDP 8.0.
    There is problem with high cpu load on these servers. Sometimes Svchost.exe starts to cause 60-100% load. Our virtual machines have 10 virtual processor cores. Load is caused by LSM (Local Session Manager) Service from DCOM Launcher group. Svchost
    creates many thread as you can see on picture attached. Sometimes this load disappears after 12-24 hours, sometimes it needs restarting whole server.
    We still cannot find cause of this problem, although we managed to reproduce this issue one time by logging two admin accounts to server console and force disconnecting one of these accounts by third admin account connecting to server console by RDP
    mstsc.exe with -admin parameter.
    Our users are very unsatisfied :-(
    This is screenshot of Process Explorer - svchost.exe - Threads:

    Hi,
    Thank you for posting in Windows Server Forum.
    Do you have any recent updates, might happens due to automatic updates which also can cause high cpu through svchost.exe. Please check as suggested by “Larry” by turning off Windows update service. In addition go through beneath articles for more information.
    1. Automatic Update causes SVCHOST.exe high CPU
    2. Getting Started with SVCHOST.EXE Troubleshooting
    Hope it helps!
    Thanks, 
    Dharmesh

  • Firefox browser continues to hang and sometimes crashes when trying to load more than 10 bookmarks in tabs. Please help with my request as I would like to choose which tabs will load webpages and have all others stopped.

    ''locking as a duplicate - https://support.mozilla.com/en-US/questions/876430''
    I have thousands of favorites and Firefox is my web-browser of choice. Sadly I'm backed up on what bookmarks I have stored and if the websites are still active or not.
    I cannot load more than 15 bookmarks it seems at once as my PC is trying to load all the web content for each page in the new tabs.
    This is my PC specs:
    OS Name Microsoft Windows XP Professional
    Version 5.1.2600 Service Pack 2 Build 2600
    OS Manufacturer Microsoft Corporation
    System Name xxxxxxxx
    System Manufacturer System manufacturer
    System Model System Product Name
    System Type X86-based PC
    Processor x86 Family 15 Model 75 Stepping 2 AuthenticAMD ~2210 Mhz
    Processor x86 Family 15 Model 75 Stepping 2 AuthenticAMD ~2209 Mhz
    BIOS Version/Date American Megatrends Inc. 0301, 21/08/2006
    SMBIOS Version 2.3
    Windows Directory D:\WINDOWS
    System Directory D:\WINDOWS\system32
    Boot Device \Device\HarddiskVolume1
    Locale United States
    Hardware Abstraction Layer Version = "5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)"
    User Name xxxxxxxx/ADMIN
    Time Zone Atlantic Daylight Time
    Total Physical Memory 2,048.00 MB
    Available Physical Memory 1.53 GB
    Total Virtual Memory 2.00 GB
    Available Virtual Memory 1.96 GB
    Page File Space 3.85 GB
    Page File D:\pagefile.sys
    I have High Speed internet connection with the provider Rogers.
    Dlspeed is 12.9 Mbps
    Upspeed is514 kbps
    My PC supports Windows 7 OS which I have as a multiboot alternative when my PC starts up.
    I have continually waited and it says Firefox is not responding and I may be able to see the multiple tabs opened in my browser but cannot navigate or access them.
    I have read on various sites that users have had as many as 1500 bookmarks load at once in tabs in the Firefox browser version that are outdated.
    I have not been successful with just loading 50 bookmarks my goal is to be able to have 500 tabs loaded in firefox with webpage loading stopped on all of them. I will choose reload for about 10 tabs at a time to view webpage content and then close and move on to the rest.
    My ultimate goal is to clear up the Thousands of bookmarks I have piling on for the past 6 years and some are duplicates or similar page sites.
    Their is no Firefox 3rd party addons that I could locate that would allow this. Only to restrict the number of tabs loaded by giving warning messages when limit is reached.
    Please assist me as it will greatly help me with finally deleting and re-organizing my Favorite and frequent websites in my Browser of choice Firefox.
    The email is generic for privacy but it is valid please respond with methods on how I can achieve my request or suggestions on how I can modify my browser or PC settings to allow this. Thanks Firefox Administration Team.
    I edited with a recent Workaround added to Troubleshoot section.
    If there is a keyboard shortcut or easier way to do this would someone please let me know?

    Firebug is notorious for causing problems like you described.
    Disable it when you don't need it or install it in a 2nd Profile. Then you can launch the 2nd Profile separately to use Firebug and not affect what you are doing in the 1st Profile,

  • Encore can't burn more than one DVD at a time: Sense Code 56400

    For a long time now I've been unable to burn multiple DVD's at a time. I burn more than one and I get an error and have to make a coaster out of yet another DVD
    I just upgraded to 24 gb of DDR3 PC 1600 RAM, I have an 6 Core Processor, I have 7.8 on everything accept my hard drive which is 7.0 out of 7.9 according to my Windows 7 Pro. 64 bit system.
    I have 2 different DVD burners, one is a blu-ray burner too. I have the same issues, only different error readings it seems, on both drives. The first drive didn't burn even one for some reason so I tried the second. The second drive would burned 3 and on the fourth I got the errors' which I've included screen shots of below. I was surprised I got through three before I got to this error. By the end of the week I have a large project I need to make 30 DVD's of. HELP!!!!!
    A long time ago on my older machine I had similar problems and I went through different drives and discs until I seemed to come up with the magic combination which seemed to be a Plextor burner and Verbatim. But, then i got a bad batch of verbatim and tried Maxell and used those successfully for a while. Right now I'm using what a friend gave me, TDK's. I'm wondering if that's what the problem is... HELP!!!!

    I have managed to get it to work consistently now. I just burned 20 DVD's without a problem.
    I tried everything you suggested except the imageburn software. I didn't like that site, I was too anxious to try and figure out where to download that software in the midst of all the advertisements on that site.
    After clearing out everything in startup and services except what I needed I still wasn't able to burn successfully. Finally I went and purchased some Verbatim DVD-R discs and wahlah! Actually, after the first try with the verbatim I had an error code when trying to burn with Encore. So, I created and image file as you suggested and then I used Cyberlink's Power2Go to burn the image file and from there on it seems everything is solid.
    I think the biggest problem was using TDK discs. I came to the realization a few years ago that certain disks are not as predictable as others and that verbatim and maxell seem to be the best. I did get one bad batch of verbatim though one time and that's when I switched to Maxell. My friend gave me 200 of the TDK's and I've been having problems ever since. But, I wasn't sure what it was exactly because he gave me those around the same time I rebuilt my system.
    I had also found the Plextor seems to be the best bet for burners. But, I had been using an HP one lately and thought maybe that was the problem. However, now it seems to be fine.
    I really don't know what fixed it. I mean, nothing definitely worked until I started using the Verbatim today. But, that first verbatim erroring perplexed me. I had done some other things too, like removed some programs, like a bunch of HP printer crap. I even removed my virus software, Window Security Essentials. I just reinstalled it so now I'm wondering if I can burn as consistently. I had seen somewhere where someone said they removed Windows' Defender to get theirs working.
    Anyways, I guess what I need to do is format my main hard drive, only put adobe stuff on it, and then take my old computer set it up for everything else. That'll probably be the best thing to do... If I have anymore problems like this I'm doing that right away!

Maybe you are looking for