[svn] 3406: Tweaks to ZipCodeValidator to ensure error messages are consistent with pre-patch behavior .

Revision: 3406
Author: [email protected]
Date: 2008-09-29 13:25:10 -0700 (Mon, 29 Sep 2008)
Log Message:
Tweaks to ZipCodeValidator to ensure error messages are consistent with pre-patch behavior. Mustella tests pass (verified via cyclone).
Reviewer: Deepa
QA: Yes
Localization: Yes ***
Modified Paths:
flex/sdk/branches/3.0.x/frameworks/projects/framework/bundles/en_US/src/validators.proper ties
flex/sdk/branches/3.0.x/frameworks/projects/framework/src/mx/validators/ZipCodeValidator. as

Hi,
Found a note explaining the significance of these errors.
It says:
"NZE-28862: SSL connection failed
Cause: This error occurred because the peer closed the connection.
Action: Enable Oracle Net tracing on both sides and examine the trace output. Contact Oracle Customer support with the trace output."
For further details you may refer the Note: 244527.1 - Explanation of "SSL call to NZ function nzos_Handshake failed" error codes
Thanks & Regards,
Sindhiya V.

Similar Messages

Internet Download error message: the connection with the server has been reset

With an WRT54GS v6 firmware v 1.50.9 on Windows XP SP2 with Internet Explorer 7, Intel wireless internal adaptor w/ 802.11b, I was getting the error message "The connection with the server has been reset" when downloading most anything from the Internet. My IP address would then be reset and download would be interrupted. To resolve, I turned off the WZC (Wireless Zero Configuration) Services, and this seems to correct the problem.
Control Panel > Admin Tools > Services > Wireless Zero Configuration > Disable
Hopes this helps.

Hi!
Im using Windows 7.... I tried looking for the Wireless Config - but it isn't in the Services options!
So, what can I do now?
Thanx

I tried down loading mozilla firefox to use as a web browser. It was downloaded 100% then when prompted to "run" the error message comes up with a red cross and the message'This file is corrupted" and won't let me proceed. What do I do now?

I tried down loading mozilla firefox to use as a web browser. It was downloaded 100% then when prompted to "run" An error message comes up with a red cross and the message'This file is corrupted" and won't let me proceed. What do I do now?

It is possible that your anti-virus software is corrupting the downloaded files or otherwise interfering with downloading files by Firefox.<br />
You can try to disable the real-time (live) scanning of files in your anti-virus software temporarily to see if that makes downloading work.
See http://kb.mozillazine.org/Unable_to_save_or_download_files

When I try to reformat there is an error message about configurations with the pointing device

When I try to reformat there is an error message about configurations with the pointing device
I am not sure I am on the correct section in the support area for Lenovo.
I had a mouse issue. It was unable to read the mouse. Now the mouse is working and it is initialized.
I have no idea why.
There is an error message saying that I should press F 1or F2. I pressed down F 1 and I tried to work with it and I enabled the mouse or I tried. The mouse is working fine but the computer will not recover completely the way it used to.
It is very confusing. When I shut down and restart there is an message that was not there before about the pointing device. Also the recovering operation never asked me for disks. Now it is doing that. I have disks but this is all confusing. I just want the computer to be the way it was. It is working fine except for booting up and the messages.

Hi marissa, welcome to the forums,
you may or may not be in the right place, but it would certainly help members to help you if you could post exactly which Lenovo system; notebook / computer, you have and which operating system is installed on it.
Thanks in advance
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Error messages are displayed when opening the RTV form.

Hi All,
While doing a return to vendor the following error messages are displayed.
1.Go to the Inventory Management --> Return to Vendor screen.
2. In Action Drop down select ‘New’ and click on OK
3. A series of errors are encountered.
4. A warning message as [640+49> 688] and then click ‘OK’.
5. Notice the error message”Multi view internal error: B_RTV_DETAIL.QTY_RETURNED:current_col_pos exceeds parameter defined maximum right position” and then click’ OK’.
Can any one help me out in these?
Thanks,
Sushanth.D

This is a coding issue in the form, maybe the number is too big for the box on the canvas.
It looks also like a business issue is kicking off the error, the message [640+49> 688] looks like some units of stock etc. check, e.g. the returned quantity is larger than the stock on hand.
File an SR with OracleSupport and/or open the UI's Form fmb code in Forms Developer.
Multi View relates to an (quite old) OracleRetail (Retek) Forms pll library that enhances the Forms features, if my memory is not letting me down.
Best regards,
Erik

I am getting the error message "cannot communicate with the server" when i try to sign into my apple account on my ipad - any ideas???

i am getting the error message "cannot communicate with the server" when i try to sign into my apple account on my ipad - any ideas???

Welcome to the Apple Community.
The following article(s) may help you.
Photo Stream ToU's

JSF: Error Message are not getting cleared

Hi,
I am facing some problem with error messages in JSF.
Here is what I am doing
1. User submits a form, server validates and sends back the error to the client error message added to Faces Context.
2. User checks the messages, changes the input and submits. assuming everything is correct now.
3. On server, it validates and writes data to response for download using the following code.
FacesContext faces = FacesContext.getCurrentInstance();
    HttpServletResponse response = (HttpServletResponse)faces.getExternalContext().getResponse();
    DownloadResponse.sendDownload( response, is, fileName );
    faces.responseComplete();
}4. It shows the download popup to download the file. The problem here is that error message are not getting cleared off. User can still see the error message on the screen.
It seems I am missing something in JSF req-response life cycle. Anyone please point out the mistake.

SudhirMongia wrote:
4. It shows the download popup to download the file. The problem here is that error message are not getting cleared off. User can still see the error message on the screen. Wrong. The problem is that the view is not rerendered, which makes sense because you are not sending view content to the browser but your file.
Your real question probably is: how do I cause a file download and still rerender the view afterwards to show the results? To that I myself do not have the answer unfortunately, but I have seen that question come by a few times already, so doing some searches in these forums may yield you an answer.

Floor Plan Manager Webdynpro Java Application : Error Message area change

Hello Experts,
We have a Java Webdynpro Application inside the ESS business package ,delivered by SAP .
Is there anyway we can control the Error message area at the top of the Java webdynpro applications using the configuration controller without changing the source code for a particular Java webdynpro application???
I like to bold the error messsage and change the text color in the SAP Portal.
If not possible using the configuration controller, what are steps that we need follow to do this change.
Any help will be appreciated.
Thanks,
Greetson

This cannot be done through personalization or any configuration.
If you want to change look and feel of error message then assuming these are personal information applications....you will be required to make changes to ess~per DC in NWDI or application specific DC in NWDI.
Still I believe...in web dynpro java....it will not be possible to change look and feel of standard error message area

Prevent that error messages are displayed twice

Hi All!
How can I prevent that error messages are displayed twice.
The FuBa is called at the backend more than one time (at least twice)
therefore I get every message twice.
Regards
sas

Sas-
I'm not sure if I understood your problem. Are you saying that you have a service which you call in a loop, and display the error message in the loop as well? If so an option would be to have a [HashMap|http://java.sun.com/j2se/1.4.2/docs/api/java/util/HashMap.html] where the key is the error message id, and the value is the error message. In the loop check if the error message id returned by your service already exists in the map and add it only if absent. Then after your loop is complete use the MessageManager to display your consolidated error messages.
Cheers-
Atul

Error message area not expanded per default - but i want it expanded

Hello,
per default the error message area in web ui is NOT expanded. But I would like to have it expanded per default. But i cannot find the right area to change this behaviour.
Does anyone have an idea how to change it to be expanded per default?
Many thanks for your ideas and input.
BR Andreas

Thanks to your reply i found it pretty well documented in help.sap.com:
http://help.sap.com/SCENARIOS_BUS2010/helpdata/EN/cb/659ebfc880493baad66896518a55a1/frameset.htm
Edited by: andreas lehner on Jan 30, 2012 10:01 AM

While updating ipod touch 4 i got an error message now stuck with apple symbol and empty bar. can i restart ipod?

while updating ipod touch 4 i got an error message now stuck with apple symbol and empty bar. can i restart ipod?

- What was the error message?
- Try closing iTunes and then disconnect the iPod from the computer. Then reconnect the iPod. If the iPod shows in iTunes then you can try again. However, You should try to resolve the error message first.
- If iTunes does not see the iPod try reetting the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- I recommend that you come back with the what the error message said and the condition of the iPod and if it is visible in iTunes.

How to restrict the Save of a Campaign if any error messages are raised/there?

Hi All,
How to restrice the save of the Campaign if any error messages are called/raised.
Now, I am using conditions in the Save method but it is not working now.
find the Attachment for the error message.
I am assuming this error is calling from some where not from my code.
Please suggest me any Badi or other way to restrict the save of the Campaign.
Thanks in Advance....
Regards
vam's

Hi I am actually trying to prevent the saving by using the BADI and putting
ev_reject_save = abap_true.
Nevertheless the campaign is saved with errors...any idea how to prevent this ?

M1319F Scan error message " cannot communicate with the scanner"

I have a HP M1319F which was able to print/scan/fax. Recently the fax function has ceased. I have ordered a fax board which will hopefully resolve that problem. Now it does not scan as well. I get the error message " cannot communicate with the scanner" . unistalled and resinstalled the software but to now avail

I have a HP M1319F which was able to print/scan/fax. Recently the fax function has ceased. I have ordered a fax board which will hopefully resolve that problem. Now it does not scan as well. I get the error message " cannot communicate with the scanner" . unistalled and resinstalled the software but to now avail

Error messages are not posted into ECH using collect method

In asynchronous interface, Error messages are not posted into tcode:ECH_MONI_SEL using collect method.
In the collect method, passing software component version,business process and error messages.but its not posted into ech and ppo.

Hi,
Have you created the FEH class for the proxy. In that, from within the PROCESS method, when there is an error you will be placing those errors into a table and this needs to be passed to the COLLECT method.
CALL METHOD i_ref_registration->collect
   EXPORTING
     i_single_bo      = input
     i_component      = 'ZSWC'   "Software component defined while FEH customisation
     i_process        = 'ECH_BP' "ECH Business process defined while FEH customisation
     i_error_category = lc_errcat
     i_main_message   = wa_error
     i_messages       = lt_error
     i_main_object    = wa_object.
Here while populating the wa_object, the objtype field should be populated with the object type defined while FEH customization.
If all these things are done, then this should post the error.
Regards,
Abijith

[svn] 4293: Timer usage cleanup to ensure all listeners are fully removed once we' re done with the underlying Timer.

Revision: 4293
Author: [email protected]
Date: 2008-12-11 21:18:10 -0800 (Thu, 11 Dec 2008)
Log Message:
Timer usage cleanup to ensure all listeners are fully removed once we're done with the underlying Timer.
QA: No
Doc: No
Checkintests Pass: Yes
Modified Paths:
flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/Channel.as
flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/MultiTopicConsumer.as

Revision: 4293
Author: [email protected]
Date: 2008-12-11 21:18:10 -0800 (Thu, 11 Dec 2008)
Log Message:
Timer usage cleanup to ensure all listeners are fully removed once we're done with the underlying Timer.
QA: No
Doc: No
Checkintests Pass: Yes
Modified Paths:
flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/Channel.as
flex/sdk/trunk/frameworks/projects/rpc/src/mx/messaging/MultiTopicConsumer.as

[svn] 3406: Tweaks to ZipCodeValidator to ensure error messages are consistent with pre-patch behavior .

Similar Messages

Maybe you are looking for