Swap phone number between two lines at same proper...

Hello,
I was hoping for some help in finding out if it is possible to switch our phone numbers around on our BT Business phone line to our BT Personal Phone line?
Thanks for any help/advice you can offer.

seanuk wrote:
Hi Keith,
Thanks for your reply. The residential line is not used for business and both lines are in different parts of the home.
Cheers
It would be much cheaper to run your own internal extension wiring between the two rooms, and then swap them over yourself, provided you have the modern NTE with the removable faceplate on both lines.
Like this
I dread to think the sort of hassle you are going to get, trying to sort it out between BT Business and BT residential. No something for the faint hearted
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Similar Messages

Can I switch my phone number between two lines(not just between phones)?

I have 4 months left on my current plan. I would like to take advantage of current holiday sales to get the droid razr for cheap. I am considering adding an additional line to my plan to get the upgrade. The problem with this is that I either have to use the new number and let my other contract end or continue on with my current number and pay for 2 lines for the next 2 years. I noticed that verizon lets you switch the phone number that is associated with your line. Would I be able to add an additional line to my plan and then switch the numbers between these two lines? Essential line A has number A and ends in 4 months, line B has number B and ends in 20 months, and I want to make it so that line B has number A and then only pay for line A for the next 4 months. Is this possible?

Verizon does not allow you to switch numbers since they are tied to your contact. However, there's a work around, because Verizon does allow you to port a number from another carrier to overwrite the existing number without changing your contract. So here's what you need to do:
1. Get the Razr cheap like you wanted on a secondary line;
2. Wait for 4 months so your main line contract is up;
3. Port out your main line number to another carrier, for example, Pageplus;
4. Wait till your bill cycle is passed and port that number from Pageplus to Verizon, overwrite the number on secondary line.
After step 4 you will have your main number back on the line with the Razr.

Swap phone numbers between two different accounts.

I currently have two phone plans and two phones. One is on my mother's account and the other is a new phone I just started on my Fiance's account. They are completely separate from each other. My mother has a plan she own's and my fiance has a plan she owns.
My question is; is it possible to swap numbers between the 2 phones? I want the number from my old phone that is on my mother's plan to be on my new phone that I just got. My mother plans on letting the other phone run out of contract and cancelling the line. I know I can swap the sim cards, but that would put my new phone on the wrong plan.

Why didn't you perform an Assumption of Liability (AOL) to transfer your original line from your mother's account to your fiancé's account?

Can I swap all tags between two songs?

I downloaded a compilation album but the songs are all mislabeled -- all of the info for song 1 belongs to, say, song 7, and all of the info for song 7 belongs to song 5, and all of the info for song 5 belongs to song 13.... Since it's a compilation album, there are a lot of tags that I would need to edit to correct this (name, year, track number, artist, composer, etc.). Is there a way to swap *all* tags between two songs? Even better, is there a way to edit the library info using some sort of text editor instead of the GUI? Thanks.
- mb

Just change the track numbers... Line them up in song name order so they don't jump about as you edit things.
I have scripts for similar tasks within the same file, e.g. swapping track name with artist, at http://samsoft.org.uk/iTunes/scripts.asp.
tt2

Unable to find line break between two lines in attachment file.

Dear all I will be very great full if someone help me out,
I am trying to send mail through SMTP server with an attachment of oracle report, but I am unable to find line break between two lines, when I down load the attachment from mail and open attach.txt file by double click on it. Next line starts right after previous line ends, it should starts with new line.
In order to send an attachment file, I am reading source file line by line and put MIME protocol’s attachment instance, contain of source file is being properly written into target file if I open that attachment on cmd prompt.
Following code may help you to understand the case.
Thanks in advance.
My code is as follows:-
create or replace procedure bec_file_test
v_subject varchar2, -- Subject of the email
v_body varchar2, -- Body of the email
v_from VARCHAR2 default 'XYZ.com', -- sender mail id
v_to varchar2 default 'XYZ.com', -- Field To of the email
v_cc varchar2 default 'XYZ.com' -- cc address
) is
-- variable to hold the smtp server connection
v_smtp_connection utl_smtp.connection;
-- variable to hold the smtp host name
v_smtp_host varchar2(100) default 'mail.bec-group.com';
-- variable to hold the smtp port
v_smtp_port number default 25;
-- composite of {CR}{LF} caridge return and line feed.
CRLF varchar2(2):=CHR(13)||CHR(10);
cursor pr_rec is
select requisition_no,line_no,release_no,a.contract,
a.project_id,substr(a.activity_seq,1,11)ACT_SEQ,
substr(a.part_no,1,12)PART_NO,
substr(a.description,1,32)DESCRIPTION,
substr(a.Bal_qty,1,8) BAL_QTY,
substr(a.unit_meas,1,5)UOM,
a.wanted_receipt_date WAN_REC_DT,
a.latest_order_date LAT_ORD_DT
from bec_pr_line_rep a
where a.Bal_qty>0 and a.header_state not in 'Closed'
and upper(a.state1) like 'RELEASED' and a.contract not in ('U1ENG','ULENG','U1FND','U2FND')
and a.buyer_code='70306'
order by a.part_no;
begin
declare
fHandle UTL_FILE.FILE_TYPE;
v_msg_line varchar2(2000);
-- v_buffer varchar2(20000);
--ALTER SYSTEM SET utl_file_dir = 'D:\Database\temp'
--COMMENT='Temporary change on Dec 14'
--SCOPE=SPFILE;
SELECT name, value
FROM gv$parameter
WHERE name = 'utl_file_dir';
--drop directory my_directory
--CREATE or replace DIRECTORY my_directory AS 'D:\database\temp';
--GRANT read,write ON DIRECTORY my_directory TO PUBLIC;
begin ---writing data into a file.
fHandle := UTL_FILE.FOPEN('MY_DIRECTORY', 'pending_pr_summry.txt', 'w');
UTL_FILE.put_line(fHandle, ' Pending PR to process (detail report)');
UTL_FILE.put_line(fHandle,TO_CHAR(SYSDATE,'MM-DD-YY HH:MI:SS AM'));
UTL_FILE.put_line(fHandle, '--------------------------------------------------------------------------------------------------------------------------------------------------');
UTL_FILE.put_line(fHandle, 'Req.no. li Re Site Prj Id Act seq Part no Description Qty UOM want rec dt lat ord dt' );
UTL_FILE.put_line(fHandle, '--------------------------------------------------------------------------------------------------------------------------------------------------');
for pr_temp in pr_rec loop
begin
v_msg_line:=to_char(rpad(pr_temp.requisition_no,12,' ')||'|'||
lpad(pr_temp.line_no,3,' ')||'|'||
lpad(pr_temp.release_no,3,' ')||'|'||
rpad(pr_temp.contract,7,' ')||'|'||
lpad(nvl(pr_temp.project_id,' '),7,' ')||'|'||
lpad(nvl(pr_temp.act_seq,' '),12,' ')||'|'||
lpad(pr_temp.part_no,12,' ')||'|'||
rpad(pr_temp.description,35,' ')||'|'||
lpad(pr_temp.bal_qty,10,' ')||'|'||
rpad(pr_temp.uom,6,' ')||'|'||
lpad(pr_temp.wan_rec_dt,14,' ')||'|'||
lpad(pr_temp.lat_ord_dt,14,' '));
UTL_FILE.put_line(fHandle,v_msg_line);
end;
end loop;
UTL_FILE.put_line(fHandle, '--------------------------------------------------------------------------------------------------------------------------------------------------');
UTL_FILE.put_line(fHandle, ' Regards : IFSAPP ( Application owner ) ');
UTL_FILE.FCLOSE(fHandle); ------------writing into file is successfuly done here!
--Reading of file starts here containt will be added in attchment file
fHandle :=UTL_FILE.FOPEN('MY_DIRECTORY','pending_pr_summry.txt','R' );
-- establish the connection to the smtp server
v_smtp_connection := utl_smtp.open_connection(v_smtp_host, v_smtp_port); /** OPEN CONNECTION ON THE SERVER **/
-- perform a handshake with the smtp server
utl_smtp.helo(v_smtp_connection, v_smtp_host); /** DO THE INITIAL HAND SHAKE **/
-- set the 'from' address of the message
utl_smtp.mail(v_smtp_connection, v_from);
-- add the recipient to the message
utl_smtp.rcpt(v_smtp_connection, v_to);
-- send the email
utl_smtp.open_data(v_smtp_connection);
v_msg_line:='Date: ' || TO_CHAR( SYSDATE, 'dd Mon yy hh24:mi:ss' ) || CRLF ||
'From: ' || v_from || CRLF ||
'Subject: ' || v_subject || CRLF ||
'To: ' || v_to || CRLF ||
'Cc: ' || v_cc || CRLF ||
'MIME-Version: 1.0'|| CRLF || -- Use MIME mail standard
'Content-Type: multipart/mixed;'||CRLF ||
' boundary="-----SECBOUND"'||CRLF||
CRLF ||'-------SECBOUND'|| CRLF ||
'Content-Type: text/plain;'|| CRLF ||
'Content-Transfer_Encoding: 7bit'|| CRLF ||
CRLF ||v_body|| CRLF;     -- Message body
utl_smtp.write_data(v_smtp_connection,v_msg_line);
v_msg_line:='-------SECBOUND'|| CRLF ||
'Content-Type: application/octet-stream;'|| CRLF ||
'Content-Type: text/plain;'|| CRLF ||
'name="pending_pr_summry.txt"'|| CRLF ||
'Content-Transfer_Encoding: 8bit'|| CRLF ||
'Content-Disposition: attachment;'|| CRLF ||
' filename="pending_pr_summry.txt"'|| CRLF || CRLF;     -- Content of attachment
utl_smtp.write_data(v_smtp_connection,v_msg_line);
-- check file is opened
IF utl_file.is_open(fHandle) THEN
-- loop lines in the file
LOOP
BEGIN -- Content of attachment
utl_file.get_line(fHandle,v_msg_line);
v_msg_line:=concat(v_msg_line,CRLF);
utl_smtp.write_data(v_smtp_connection,v_msg_line);
EXCEPTION
WHEN NO_DATA_FOUND THEN
EXIT;
END;
END LOOP;
END IF;
--end of attachment containt
utl_smtp.write_data(v_smtp_connection,v_msg_line);
UTL_FILE.FCLOSE(fHandle);
utl_smtp.close_data(v_smtp_connection);
utl_smtp.quit(v_smtp_connection);
exception
when utl_smtp.invalid_operation then
dbms_output.put_line(' Invalid Operation in Mail attempt using UTL_SMTP.');
when utl_smtp.transient_error then
dbms_output.put_line(' Temporary e-mail issue - try again');
when utl_smtp.permanent_error then
dbms_output.put_line(' Permanent Error Encountered.');
when others then
dbms_output.put_line('Exception: SQLCODE=' || SQLCODE || ' SQLERRM=' || SQLERRM);
RAISE;
end;
end bec_file_test;

Pending PR to process (detail report)01-17-13 12:43:19 PM--------------------------------------------------------------------------------------------------------------------------------------------------Req.no. li Re Site Prj Id Act seq Part no Description Qty UOM want rec dt lat ord dt--------------------------------------------------------------------------------------------------------------------------------------------------MAT/250370 | 2| 1|ISCSP | 4977| 100004207| 0104000016|Angle 50 X 50 X 6 IS:2062 Grade |500|kg |30-NOV-2012| 20-nov-2012MAT/250370 | 3| 1|ISCSP | 4977| 100004207| 0105000002|Channel 100 X 50 IS:2062 Grade A | 1000|kg | 30-NOV-2012| 20-nov-2012MAT/250579 | 2| 1|NMDCJ | 6001| 100005580| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 2991|kg | 13-DEC-2012| 03-dec-2012MAT/250606 | 2| |NMDCJ | 6002| 100005860| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 4500|kg | 29-DEC-2012| 19-dec-2012MAT/250607 | |1|NMDCJ|6001|100005580| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 1500|kg | 29-DEC-2012| 19-dec-2012MAT/250194 | 3| 1|NMDCJ | 6002| 100005818| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 3939|kg | 29-DEC-2012| 19-dec-2012MAT/250606 | 4| 1|NMDCJ | 6002| 100005860| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 39000|kg | 29-DEC-2012| 19-dec-2012MAT/250607 | 4| 1|NMDCJ | 6001| 100005580| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 17500|kg | 29-DEC-2012| 19-dec-2012MAT/250194 | 2| 1|NMDCJ | 6002| 100005818| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 12183|kg | 29-DEC-2012| 19-dec-2012MAT/250606 | 6| 1|NMDCJ | 6002| 100005860| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 9500|kg | 29-DEC-2012| 19-dec-2012MAT/250607 | 6| 1|NMDCJ | 6001| 100005580| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 4500|kg | 29-DEC-2012| 19-dec-2012MAT/250194 | 6| 1|NMDCJ | 6002| 100005818| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 17500|kg | 29-DEC-2012| 19-dec-2012MAT/250607 | 7| 1|NMDCJ | 6001| 100005580| 0109020008|TMT Bar 32 mm Fe 415 IS:1786 | 22000|kg | 29-DEC-2012| 19-dec-2012MAT/250194 | 7| 1|NMDCJ | 6002| 100005818| 0109020008|TMT Bar 32 mm Fe 415 IS:1786 | 27060|kg | 29-DEC-2012| 19-dec-2012MAT/251138 | 1| 1|NMDCJ | 6002| 100005825| 3501000001|Cement 50 kg | 1|pkt | 25-DEC-2013| 14-dec-2013--------------------------------------------------------------------------------------------------------------------------------------------------
where as source file is like that:-
Pending PR to process (detail report)
01-17-13 12:43:19 PM
Req.no. li Re Site Prj Id Act seq Part no Description Qty UOM want rec dt lat ord dt
MAT/250370 | 2| 1|ISCSP | 4977| 100004207| 0104000016|Angle 50 X 50 X 6 IS:2062 Grade | 5500|kg | 30-NOV-2012| 20-nov-2012
MAT/250370 | 3| 1|ISCSP | 4977| 100004207| 0105000002|Channel 100 X 50 IS:2062 Grade A | 1000|kg | 30-NOV-2012| 20-nov-2012
MAT/250579 | 2| 1|NMDCJ | 6001| 100005580| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 2991|kg | 13-DEC-2012| 03-dec-2012
MAT/250606 | 2| 1|NMDCJ | 6002| 100005860| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 4500|kg | 29-DEC-2012| 19-dec-2012
MAT/250607 | 2| 1|NMDCJ | 6001| 100005580| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 1500|kg | 29-DEC-2012| 19-dec-2012
MAT/250194 | 3| 1|NMDCJ | 6002| 100005818| 0109020002|TMT Bar 10 mm Fe 415 IS:1786 | 3939|kg | 29-DEC-2012| 19-dec-2012
MAT/250606 | 4| 1|NMDCJ | 6002| 100005860| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 39000|kg | 29-DEC-2012| 19-dec-2012
MAT/250607 | 4| 1|NMDCJ | 6001| 100005580| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 17500|kg | 29-DEC-2012| 19-dec-2012
MAT/250194 | 2| 1|NMDCJ | 6002| 100005818| 0109020004|TMT Bar 16 mm Fe 415 IS:1786 | 12183|kg | 29-DEC-2012| 19-dec-2012
MAT/250606 | 6| 1|NMDCJ | 6002| 100005860| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 9500|kg | 29-DEC-2012| 19-dec-2012
MAT/250607 | 6| 1|NMDCJ | 6001| 100005580| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 4500|kg | 29-DEC-2012| 19-dec-2012
MAT/250194 | 6| 1|NMDCJ | 6002| 100005818| 0109020006|TMT Bar 25 mm Fe 415 IS:1786 | 17500|kg | 29-DEC-2012| 19-dec-2012
MAT/250607 | 7| 1|NMDCJ | 6001| 100005580| 0109020008|TMT Bar 32 mm Fe 415 IS:1786 | 22000|kg | 29-DEC-2012| 19-dec-2012
MAT/250194 | 7| 1|NMDCJ | 6002| 100005818| 0109020008|TMT Bar 32 mm Fe 415 IS:1786 | 27060|kg | 29-DEC-2012| 19-dec-2012
MAT/251138 | 1| 1|NMDCJ | 6002| 100005825| 3501000001|Cement 50 kg | 1 |pkt | 25-DEC-2013| 14-dec-2013
Ignore alignment. It is well formatted in source file.

Can I use one phone number on two iphones with two apple ids?

My carrier allows multiple sim cards with the same phone number for usage on different devices. I would like to use a second sim card for my phone number on a second iphone, but with a different apple id.
Is it possible to use one phone number on two iphones with separate apple ids? How does this affect facetime/imessage?
I can only find answers to using the same apple id on multiple devices. This works fine, but is not what I want to do here.

You may be able to change the suspicious account activity message alerts
in your Gmail settings, and check that side of it, since I can use several
means of accessing my Gmail and Google Accounts; and in the past had
shared an account (not google) with another party half a world away when
her email server went down for a month.
The Mail software should not know the difference, unless the setup in there
is not correct; if this is so, then more than what she says would be wrong.
The Google mail Support help site pages should cover this adequately.
Gmail Help - Google Help
https://support.google.com/mail/?hl=en

If I change my iPhone phone number can I use the same iTunes backup?

If I change my iPhone phone number can I use the same iTunes backup?
Keeping iPhone 4, just want to change number and keep settings and all that. Is it possible?

yes

Ask split long text into two line into same cell for ALV

Dear All,
Is it possible split long text into two line into same cell for ALV display data?
Regards,
Luke
Moderator message: please search for information before asking.
Edited by: Thomas Zloch on Feb 24, 2011 10:12 AM

Keep options: Select the paragraph, then CtrlAltK (Mac: CmdOptK, I
think).
If you want the paragraphs in pairs, create two paragraph styles. Style
A has keep options set to start on a new page, and also, its Next Style
is style B.
Style B has no keep options, but it's Next Style is Style A.
Select all the text.
From the flyout menu of the paragraph styles palette, apply Style A
"then next style."
Now all paragraphs will be alternating -- style A, style B, style A, etc.
Now do what I wrote initially, and you'll have pairs of paragraph in
separate text frames.

Stock Transfer Between two plants within same company code

Hello,
We are using scenario-'Stock transfer between two plants within same company code. Scenaro is like Plant A is receving plant and Plant B is delivering Plant.
Plant A release PO for 100 nos to Plant B
Plant B issues 100 nos (via delivery) to Plant A
But Plant A receives only 50 nos physically so they do Goods receipt for 50 nos , but document got generated for 100 nos (when plant B issues material).
Now Plant A do not want to receive remaining 50 nos physically, but wants to reduce material document which got created when goods issue posted by plant B
Now stock in transis (mb5t) is 50 nos.
How to reduce this material document. or any another alternative solution for this?
Thanks,
Shailesh

Hi There
Reversal of partial is not possible ,
But you can use the Mov Type 557 and 558 to do the adjustments in Stock in transit qty
Few more details on STO adjustments
Hi There
it can be settle in many ways,,,
1. Receive the goods as 100 and Scrap the 50 nos from the received plant,,- If the receiving plant is responsible
2.Revert the PGI/Transfer movement(Vl09) and send the 50 nos again from the supplying plant- of the Supplying plant is responsible,
3.Also we have the movement type 557 and 558 without doing the above two steps you can correct the qty from stock in transit itself,,
4. also you can check the below similar thread
STO - material lost during tranfer from plant A to plant B
5. If above are not ok, then receive the goods as 100, And raise the STO as your plant as supplying plant and receiving plant is (Supplied 50 nos less) plant,, Do the process without sending the material.. in this way that 50 nos can be adjusted,,
6.Here is some more details
557 Issue from stock in transit (adjustment posting)
Only use this movement type (also the reversal movement type) under the following circumstances:
Using movement type 557, you can correct purchase-order-independent stock in transit if
- a good receipt cannot be posted to a purchase order without stock in transit, even though there is still stock in transit according to the purchase order history
- stock in transit still exists, even though there are no open stock transfer orders for the particular material
This movement type may ONLY be used in the cases mentioned above after careful analysis, to correct stock in transit that has rounding errors.
This movement type may not be copied.
Note!
Before using this movement type, note the following:
- 392205 Analysis stock in transit / Correction if split valuation
Possible special stock indicators:
E, Q
7. As previous post says if you have the note for this issue you can use that also
You can use any one of the way to solve the issue, Hope it helps
Cheers
Senthil P

Shortest distance between two line segments

Hi.
I am looking for the code of the "Shortest distance between two line segments". I would appreciate if anyone has and willing to share.
I can find some in the net but its in VB and i am not familiar with it.
THanks a lot.
regards,

There are a couple of things that are not clear:
What determines the rotation speed and lenght of each stick at any given time?
What is the program allowed to do to prevent collision (change speed/direction, change radius, stop everything)
Since you want to prevent collision, you need a predictive algorithm. Once they overlap, the collision has already happened. Too late!
What information does your algorithm get (e.g. r1, r2, theta1, theta2, delta-thetat1, delta-theta2, etc.), i.e. does the program only get static information and need to construct the trajectory from sequential history data or does it get dynamic information about speed and direction?
The trivial answer would be to just keep r1+r2 < distance(P1,P2). This will prevent all "potential" collisions.
LabVIEW Champion . Do more with less code and in less time .

Spacing between two line types in smartform

I have data in two different line types as below
line type1
linetype2
but what my requirement is
line item1
line item2
i had tried by changing the smart style but it dint work. Please help me out in reducing the space between the datas of the line types.

Hi
Go to your smartstyle.
Go to your paragran format.
Click on tab Indents and Spacing.There you will see a field named LINE SPACING.In that you can adjust the spacing between two lines.
Regards
Khushboo

How to check relation between two tables in same database

How to check relation between two tables in same database using Oracle SQL developer. Version 2.1.1.64

Hi,
Try this,
SELECT   cons.owner AS child_owner, cons.table_name AS child_table,
         cons.constraint_name constaint_name,
         cons.constraint_type constraint_type, col.owner parent_owner,
         col.table_name parent_table, col.column_name column_name
    FROM dba_cons_columns col, dba_constraints cons
   WHERE cons.r_owner = col.owner
     AND cons.r_constraint_name = col.constraint_name
     AND col.owner = 'MY_USER'
ORDER BY child_table;Thanks,
Shankar

Cannot get Telnet to work between two servers on same subnet

I need to test if communication is open on port 8444 between two servers.
I installed telnet client on a Server 2008 R2 server and telnet server on a Server 2008 SP2 server. I also manually started the Telnet service that was set to disabled on the SP2 server. I disabled the Windows firewall on both servers. They
are both on the same subnet so they don't need to go through any routers and I can ping successfully.
When I try to telnet to the remote server by typing telnet "ip address" 8444, I get an error that says "Could not open connection to host, on port 8444: Connection failed.
I tried other ports like port 80 and got the same error.
What else is needed to get this to work?

VMs have nothing to do with it, as long as there's network communication between the servers.
As I said, there must be a service or application listening on that port for it to respond. For example, try this:
C:\> telnet
When the telnet prompt opens, type in:
open mail.messaging.microsoft.com 25
If it works, you should see this:
220 CH1EHSMHS035.bigfish.com Microsoft ESMTP MAIL Service ready at Thu, 7 Feb 2013 00:57:33 +0000
That means that Microsoft's mail servers are LISTENING on port 25 and it responded. And note, telnetting to port 25 is a non-default telnet port, because port 23 is the default telnet port. When you type in a space and then a port number, you're telling
the telnet client to use that port.
That is the SAME THING if some sort of application or service is listening on port 8444 on that other server you're trying to telnet to. If there is no app or service listening, it will just time out.
And no, installing the TELNET service on that sercver will NOT answer to any port other than 23. The telnet service by default, uses TCP 23, unless you specify otherwise.
So once again, what service or app on that server is supposed to be listening on 8444?
Ace Fekay
MVP, MCT, MCITP/EA, MCTS Windows 2008/R2 & Exchange 2007, Exchange 2010 EA, MCSE & MCSA 2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer
Microsoft MVP - Directory Services
Technical Blogs & Videos: http://www.delawarecountycomputerconsulting.com/
This post is provided AS-IS with no warranties or guarantees and confers no rights.

Can I switch phone numbers between two iPhones?

I have ordered a 3GS, replacing my wife's 2G model. She will now get my 3G model. Do we have to change phone numbers or is there a way to move my 3G number with the 3GS and vice versa. It would be much better if that was possible.

I also wish to switch phone numbers between phones. I just got off the phone with AT&T customer support. You can handle this over the phone. Need to have the two phones in hand at the time. I got through to customer support today with less than one minute on hold. I was quite surprised. AT&T must have really staffed up for the release.

How can I swap phone numbers between Verizon and T-Mobile phones?

I have Verizon and T-Mobile phones. My wife uses the T-mobile phone and I the Verzion phone. I was given a GSM iPhone 5 that I want to use on the T-mobile account, so I want to move the Verzion phone number to the T-Mobile phone and the T-Mobile number to the Verzion phone. I do not want to have to inform all our friends about the number swap. I also would like to maintain phones on different networks for reliability and connectivity assurance.
I called the Verizon wireless number and the person couldn't help me. The best I can figure out is to give up on Verizon and move the Verizon phone number to a new T-mobile account.
Any ideas?

They are both 4g phones correct? All verizon phones come unlocked. If the verizon phone works with tmobile all you do is take the sim card out and stick it in the phone. however when you do this it is going to erase everything on the phone so make sure you back it up before swaping sim. As far as using the tmobile phone with verizon you would need to ask tmobile if the phone is unlocked

Swap phone number between two lines at same proper...

Similar Messages

Maybe you are looking for