"SWF Only" Tools Link Problems in iOS

Does Adobe DPS handle page links well for iPad? I tried using the tools under "SWF Only" and found link problems thoughout the app. I'm wondering if those tools in DPS should only be used for apps being published for Android devices.

Also try our learning resources page: http://forums.adobe.com/thread/994742.
Neil

Similar Messages

Tesco Direct link problems with iOS 4 could be Safari

1) Log into Tesco Direct using iPhone 4 (your 3GS)
2) Type in iPhone in search bar at top
3) Once page has loaded search on right for 'All your iPhone essentials' (iPhone in a pink skin)
4) Click on that box to direct you to essentials
5) Does your phone web reset and take you back to the springboard home pages?
Also to note, all the pages (1-8) have closed down bar 1

Same prob!!!

I am using only one Apple ID. The problem, since iOS 6, is the App Store purchased items screen just shows loading screen it finally crashes or gives the error message 'can not connect to Apple store'

I am using only one Apple ID. The problem, since iOS 6, is the App Store purchased items screen just shows loading screen it finally crashes or gives the error message 'can not connect to Apple store'

I am using only one Apple ID. The problem, since iOS 6, is the App Store purchased items screen just shows loading screen it finally crashes or gives the error message 'can not connect to Apple store'

HT204321 i am getting a pink blur link in sunlight how to fix this i had been updated my ios to 8.2 i faced this problem in ios 8.1.3

i am getting a pink blur link in sunlight how to fix this i had been updated my ios to 8.2 i faced this problem in ios 8.1.3

Please define "pink blur link." iOS 8.3 is the current version.

Problem with ANE - "ld: -pie can only be used when targeting iOS 4.2 or later"

I'm trying to compile a simple AIR Mobile app for iOS, incorporating an ANE to support Localytics
http://flashsimulations.com/2012/06/18/localytics-adobe-air-native-extension/
Compilation fails with the message "ld: -pie can only be used when targeting iOS 4.2 or later"
Surely 7.0 is later than 4.2! (I'm using Flex 4.6 - AIR 3.9 SDKS). Tried building with FDT and with Flash CC, and against earlier versions of the iOS SDK (6.0, 5.0).
Any suggestions?

thanks, but can you be more specific? Presumably I add something in this part:
    <iPhone>
        <InfoAdditions><![CDATA[<key>UIDeviceFamily</key>
                                              <array>
                                                  <string>1</string>
                                                  <string>2</string>
                                              </array>
                                              <key>UIStatusBarStyle</key>
                                              <string>UIStatusBarStyleBlackOpaque</string>
                                              <key>UIRequiresPersistentWiFi</key>
                                              <string>YES</string>]]></InfoAdditions>
        <requestedDisplayResolution>high</requestedDisplayResolution>
    </iPhone>

How to make external SWFs garbage collected in Air for iOS?

My app uses lots of external SWFs( well they are actually included in the app with a folder but they aren't embeded ) and they do not contain any bitmapdata, only vector graphics. The problem I'm having is that they seem to be never garbage collected and System.privateMemory keeps increasing as the app loads more SWFs.
Since those SWFs only contain vector graphics, I simply nullify all the variables that are holding reference to SWF file and call System.gc().. But it doesn't seem to be working. What would I need to do for the garbage collector to clean the SWFs?
I'm using Air for iOS 3.5.0.1060 and ActionScript3.0.

Yes I'm calling System.gc() twice. I tried using loader.unloadAndStop(true) and it seems SWFs are being garbage collected but another problem has surfaced. When repeatedly loading and unloading SWF in a short period, the air garbage collector sometimes fails to work.
I've tested loading and unloading same SWF 50k times and checked trace. Occasionally, garbage collector misses to collect garbage like below( swf #45119 is not being garbage collected).
[UnloadSWF] main.swf/[[DYNAMIC]]/45115
[UnloadSWF] main.swf/[[DYNAMIC]]/45116
[UnloadSWF] main.swf/[[DYNAMIC]]/45117
[UnloadSWF] main.swf/[[DYNAMIC]]/45118
[UnloadSWF] main.swf/[[DYNAMIC]]/45120
[UnloadSWF] main.swf/[[DYNAMIC]]/45121

I have sounds problems with iOS 7

I have sounds problems with iOS 7. I can not hear my music, all the apps have no sounds. Only when I ask Siri has sound but it's too loud and awful. I found 2 errors with I ask to Siri what things she can do in Spanish the is an error and one word or If I ask who am I? She said that I have to go to settings and indicate her who I am but I already have that configured. And I try to configure again just in case, I do the same question and she still doesn't who I am.

Try a Restart.
Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
Resetting your settings
You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
Resetting your device
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple.
Here is a link to their contacts with most of the information below.
http://www.apple.com/contact/

Problem with iOS 5 update

Hi everyone!
Has someone of you have a problem with iOS 5 update? My iPhone after updating to the newest version, from time to time appears "There's no SIM card" . I don't know if there's a problem with MY iPhone or update "error"? Thanks in advance for your response.
Best regards,
glaenken

Did you try to reset the phone by holding the sleep and home button until the Apple logo comes back again?
Also try this, copied from http://support.apple.com/kb/TS2802
"No SIM installed" alert (GSM models only)
Remove the SIM card (micro-SIM on iPhone 4). Insert the SIM eject tool or the end of a small paper clip into the hole on the SIM tray. Press firmly and push it straight in until the tray pops out. See this document for more information.
Verify the SIM card is not damaged or dirty.
Reinstall the SIM card.
Turn the phone off and back on.
Wait approximately two minutes, then see if iPhone detects the SIM card and if it will register on the network.
If that doesn't work, try another SIM card, if possible, to see if it is detected.

Problems with iOS 5 in Kuwait

Problems with iOS 5 in Kuwait. ID calling issue with names not being recognised. I just downgraded to 4.3.5. Waiting for a fix from apple

After installing ios 5 here is my Concerns (Kuwait):
1- The major problem is that caller id problem doesnt recognize the +965 prefix as you all stated , i found that on all carriers in kuwait ... the only temp solution is to duplicate all the contact numbers one time with (+965) to determine the Messages , other time without +965 to determine local calls -- NOTE--- using prefix 00965 will not solve the problem because both messages and calls will not recognizing it
2- Some issues appeared in iCloud specialy in contacts section that if you disable icloud and keep your contacts on the iphone and then re-enable icloud and choose merge will cause all the contacts to be duplicated which is very annoying
3- Kuwait is not found when trying to associate my apple id to a region to apply for any of the new apple services like i messages , home sharing for music and videos or any location based service
4- strange numbering format appears in my contacts in some other countries , this cannot be controlled , dashes '-' between numbers dont know why
5- noticed some slow performance and partial hangs in answering calls or closing line .. this happened 2 times and stayed not longer than 3 seconds each .
anyway ios 5 looks promising but need to fix those slight issues ASAP

I have a problem with my iphone 4. My 3G always stays activated but I lose my network signal. The bars all get lost and I'm not able to receive / send sms, mms or phone calls. Could you guys please help me fix this problem? Ios 5.1.1

I have a problem with my iphone 4. My 3G always stays activated but I lose my network signal. The bars all get lost and I'm not able to receive / send sms, mms or phone calls. Could you guys please help me fix this problem? Ios 5.1.1

I haven't gotten a new sim card because the problem has been presenting itself in various cards not only mine. So far, all I've done is reset my network settings.
Last night, I turned off the 3G tab and it had all the signal bars. Today, I did the network reset and it's working apparently. But like I said before, previously the bars just disappear and the iphone only has the 3G activated.

IPhone 4S 64GB - Problems since iOS 6.0 and now worse upon 6.1 attempt

Hello,
It seems there are many who have been having trouble after updating to iOS 6.1.
My issue is similar, but has been going on and only gotten worse today. I have an iPhone 4S (which is unfortunately out of AppleCare warranty) that has (ever since upgrading to iOS 6.0) been randomly shutting off, and native apps have been crashing. This essentially renders the phone unusable as it is so frequent. To resolve, I had tried restoring from backup (which updated the software to iOS 6.0.1), restoring from clean install without restoring from backup, and then ultimately taking it to Apple store A (I use the terms A & B to represent two apple stores which I brought the phone to, out of convenience to where I was located on each day) where they connected the phone and their computer wouldn't even recognize it in standard mode. They then placed it into DFU mode and did a clean install with restore from backup which resulted in a recognizable piece of hardware. They then told me the battery and harware all appeared to be functioning normally according to their diagnostics tests they ran on the computer. They further stated it was definitely a software issue, and that there must have been some sort of error during the upgrade installation. I left there hopeful and optimistic, and it continued to have the same problems not even 30 minutes later. It then asked me to connect it to iTunes, so I had. At that point the phone did another clean install and appeared to be stuck in the DFU restore loop. I attempted to restore it on two different PC computers to no avail. I wound up taking it to Apple store B, where they then plugged it in and did a clean restore in DFU mode, stating that all they had to do was plug it in to get it out of the DFU mode, completing the one cycle. Again, they stated all diagnostics were clean and hardware was in perfect working order. Again, I returned home, only to have problems resume in about 30 minutes. The phone has been rather useless since for about the last week or so.
Today, I decided that since iOS 6.1 had been released, it couldn't hurt to give it a try and update the software, hoping my problems may have been answered in the form of a bug fix. Well, regretably, it could and did get worse. During the upgrade process to 6.1, I received the error "The iPhone "iPhone" could not be restored. An unknown error occurred. It continues to do this each and every time I attempt the restore, and returns the iphone screen to the connect to itunes view. Throughout the many times I have attempted the restore, I have gotten the above error message with codes (9) and (26). It is now stuck in the recovery mode. I have tried the restore to 6.1 from 3 different computers, trying all USB ports on each. I have Symantec NIS 2013 installed on all computers, which I tried updating and disabling to no avail. After working on it for several hours, I am at a loss for what to do. Any suggestions (aside from the fact that I need to get a Mac lol... as soon as I can afford the 15" MBPwR...) for what I can do or try? As I mentioned earlier, the phone is out of AppleCare warranty... :-/
In advance, I greatly appreciate anyone's input.

Have almost identicle situation going, totally screws my day for I have appointments to keep and important calls to make...this *****

"Link Problem" in Incident Form does not seem to work right? How do I do it correctly?

1. The Link Problem tool in the task pane on our Incidents, do not seem to actually link the Incident to the Problem.
2. I can link the two by going to the Problem and adding it on the related items tab, but this is very time consuming in a call center environment, especially during an outage where we are relying a lot more on Problem and root cause analysis.
3. I have tried creating the incident and applying, then doing the Link Problem tool and selecting the problem, then applying again and selecting OK to close the incident. Again it doesn't work for me.
What am I doing wrong, number one?
Can we do this without manually opening the problem for every incident and attaching from there?
3. Can I build an incident template that will automate the Attachment to the problem at creation? (Tried this today to and it wouldn't work, but then again, the Link Problem might again be the culprit) This would be great for real time saving during
an outage. Once outage is found, I could create the template with all the necessary items filled out, and would like to have it automatically attach to the specific problem I choose at template creation, and that way analysts can simply apply template, and
click OK when they get a call related to the outage.

Thanks for the response Thomas!
The functionality seems to work just fine. I use the LINK PROBLEM and it pops up the problem search box, I search for and select a Problem, I then select it and click ok, and I get no error saying the relationship was not created.
The problem is, when I open the problem after that, there is never any relationship showing in related items there, as it says there should be.
Also, to point out, I am talking about newly created Incidents. I tried even using APPLY prior to doing the LINK PROBLEM but it still did not work. I suspect it may be a workflow problem, where the workflow to create the incident has not completed, there
for the relationship is not completed.... and I get no error.
In my work environment, we have analysts during outages taking a call every 30 seconds, and I need a more efficient way for this system to work. As of now, they spend 1-2 minutes doing the ticket, and that is too long.
I have decided to try a newb way, where I created an Incident (GENERIC OUTAGE) that folks can use, and every 15-30 minutes during an outage, I can open the problem and search for open incidents with that title, and attach all that I find from the problem
side. This is assuming that once attached they will not show up in the search to attach the next time lol. Also this assumes that if attached from the problem, they will auto resolve when the problem is resolved.
I am rusty on my programming, and am currently trying to get refreshed. I am sure that would come in handy for this :)
Oh and lastly, one additional tidbit that will make this clearer, with regard to work flow, we re also running our Service Manager in our help desk, virtualized, as they have not upgraded to Win 7 yet :(. So that compiles my time to add ticket issue :(.

Problems importing IOS project into Mac 10.8.5

My good old 2009 Macbook Pro has served me well for 6 years, but now I can't seem to find a solution to what I thought should be a simple issue. Lately I've been doing sketches on my iPad using GB for IOS, 2.0.1 It's an awesome tool, but the sketches need development.
I tried importing into my Mac's GB---"Sorry you need the next version of GB." I tried importing into Logic Pro 9.1.8--- no results/never rendered.
So I thought, well $5 ain't so much for the new GB---now however I find it's not compatible w/ 10.8.5---"Sorry, you need Yosemite."
I've been upgrading my OS on this Macbook Pro over the years, and all it's done has made the computer more quirky, slower, prone to hang, &c. We all know Apple moves their latest hardware (partly) by obsoleting the old stuff through OS "upgrades" that turn your machine into a clunky fossil. The computer still does fine, as long as I don't overtax it---I don't want to buy another and I'm loath to install Yosemite, I saw some horror stories from people who tried putting it on a machine it was never intended for.
Anyway, the question is: anyone out there know of a way for me to import my iPad GB projects into this computer? Would a slightly earlier version of GB for Mac work, and if so, where can I get it?
Thanks,
John in Houston

Which version of GarageBand are you using on your Mac?
Any version of GarageBand 6.0.1 or later should be able to open GarageBand iOS projects.
See this link: GarageBand for iOS and Mac: Project compatibility - Apple Support
GarageBand 6.0.1 comes with iLife '11 installer disks, you can buy them at Amazon or eBay and then update to GarageBand 6.0.5 from the Support downloads page.
Any version of GarageBand '11 is compatible with your MacOS X version. The latest version is GarageBand 6.0.5 .
Since your MacBook Pro can run Mt. Lion, you should be able to upgrade to Yosemite. I'd ask in the MacBook Pro forum, why your Mac is slow. It is not necessarily due to the System upgrades, but can be caused by incompatible software or a lack of RAM.

What do i do after downloading iOS 3.1 software and "There was a problem downloading iOS 3.1.1 software update for ipod touch. an unknown error occurred (8288). Please check that the connection to the network is active and try again." comes up?

what do i do after downloading iOS 3.1 software and "There was a problem downloading iOS 3.1.1 software update for ipod touch. an unknown error occurred (8288). Please check that the connection to the network is active and try again." comes up?

Hello, I hope by now you have resolved the upgrade issue, but if not, here is what I ended up having to do:
“SUCCESS!!! I took my iPod to a friend who is a computer programmer/genius. He turned off his wireless, hooked the ethernet cable directly into his computer, and the download went through without a hitch. YAY!”
Here is my original post explaining what I had already tried:
“Hi all,
I got an iPod Touch 1st gen for my youngest son for Christmas as a starter. It has the 2.1.2 ios on it, but after I paid for the upgrade to 3.1.1, I keep getting an error message (8288) saying there was a problem with the network connection. I have called customer service, and they suggested I try on a different computer, and if that didn't work, try connecting to a different network, and then trying the update. None of this has worked. It seems that tech support is clueless with this issue.
I have installed and unistalled iTunes 10.5, 10.3, 10.4, and now I am back with 10.5. I have tried looking up the issue from several search engines but no one seems to have a universal solution and I have tried several.
I really want to have this thing updated for himw hwne he opens it, but I am starting to worry that my purchase was a bust. I know this is the oldest version, but I don't want to buy a newer, more expensive iPod and him still not be mature enough to really take care of it. As I said, this one is a starter.
Can anyone help? Please?!
Thank you!!!
P.S. We have a PC, with Windows XP Home.”
Now, there seem to be a lot of different ways to solve the 8288 error, none of which are universal. Best of luck getting yours upgraded!
Tiffany
P.S. The post by Sparkhi is a link to his blog going into a long story about how he wanted Apple to pay him for “solving” the issue….the one that apparently has been solved by multiple solutions. I’m not trying to bash, it just bothers me that he put up this whole story and finally, at the very end of his blog post, posts his solution.

There was a problem downloading iOS 3.1.1 software update for ipod touch. an unknown error occurred (8288). Please check that the connection to the network is active and try again.

The error
Therewas a problem downloading iOS 3.1.1 software update for ipod touch. an unknownerror occurred (8288). Please check that the connection to the network is active and tryagain.
Keeps coming up when I try upgrading iOs 3.1.1 software to my 8gb 1st generation iPod touch! Please help! I've looked at all other posts related and none helped.

Hello, I hope by now you have resolved the upgrade issue, but if not, here is what I ended up having to do:
“SUCCESS!!! I took my iPod to a friend who is a computer programmer/genius. He turned off his wireless, hooked the ethernet cable directly into his computer, and the download went through without a hitch. YAY!”
Here is my original post explaining what I had already tried:
“Hi all,
I got an iPod Touch 1st gen for my youngest son for Christmas as a starter. It has the 2.1.2 ios on it, but after I paid for the upgrade to 3.1.1, I keep getting an error message (8288) saying there was a problem with the network connection. I have called customer service, and they suggested I try on a different computer, and if that didn't work, try connecting to a different network, and then trying the update. None of this has worked. It seems that tech support is clueless with this issue.
I have installed and unistalled iTunes 10.5, 10.3, 10.4, and now I am back with 10.5. I have tried looking up the issue from several search engines but no one seems to have a universal solution and I have tried several.
I really want to have this thing updated for himw hwne he opens it, but I am starting to worry that my purchase was a bust. I know this is the oldest version, but I don't want to buy a newer, more expensive iPod and him still not be mature enough to really take care of it. As I said, this one is a starter.
Can anyone help? Please?!
Thank you!!!
P.S. We have a PC, with Windows XP Home.”
Now, there seem to be a lot of different ways to solve the 8288 error, none of which are universal. Best of luck getting yours upgraded!
Tiffany
P.S. The post by Sparkhi is a link to his blog going into a long story about how he wanted Apple to pay him for “solving” the issue….the one that apparently has been solved by multiple solutions. I’m not trying to bash, it just bothers me that he put up this whole story and finally, at the very end of his blog post, posts his solution.

"SWF Only" Tools Link Problems in iOS

Similar Messages

Maybe you are looking for