Swing+IE=problems! expert help needed

dear friends
i want to know that
1.> wheather i can use swing components in applets
2.> should i use Applet or JApplet
3.> are they supportrd well by all browsers? which versions of IE supports swing components?

Hi Jitin,
1. Yes, you can use swing components in applets.
2. You should JApplet.
3. They are supported by most of the browsers provided user install Java Plugin.
Vinod

Similar Messages

Expert help needed to connect iPhone / iPad using BlueTooth and Wi-Fi

We need expert help to connect iPhone / iPad using BlueTooth and Wi-Fi. If you have worked with Apple MFi Program [http://developer.apple.com/programs/mfi], or have expertise/experience in this, please contact me. Thanks! Kevin.

Hi there.
I connected to my livebox after about three attempts. You have to pair the livebox by pressing either the number one or two that is on the box. When it is in pair mode it stays that way for ten minutes so it gives you chance to try your wep code that is on the bottom of the box a few times. I can't remember which one was successful but i did try the letters in uppercase and lower and one of them seemed to connect.
Welcome to discussions by the way.
Hope this helps JB

Recall for my problem urgent help needed

Hi friends,
I am a new DB administrator and I have faced a problem in our database.
Here i will explain our architecture and i will state the problem.
In my org. we have database server responsible for keeping the DB itself. Another server which is the main server is responible to control the access to the network and making and storing DB backups using a third party software (Net Backup Software). The backups are kept in tapes accessed by main server using tapes robot.
Our backup policies is that the software makes full backup every week and a incremental dialy backups of the DB. The retention of each backup is two weeks. All servers have been shutted down during vacations.
The problem is that when we came from two weeks vacation, users found that the DB is in old state and we lost the most recent valid state. I tried all my best since month ago to do recovery. I decided the point of time to restore and I also use the SCNs but I could'nt reach a solution. I used Net backup, Rman, EM but without a result.
When i check NetBackup console I find a backup available since 28 of July 2010. Actually the changes are made after this date and now the DB state is older thatn this date. the question is: WHER HAVE THE CONSEQUENT CHANGES GONE? around one mounth of work has been lost..
the oracle shows me the following message:
The RMAN script for the recovey is:
Run {
allocate channel t1 type 'sbt_tape';
set until time to_date('28-Jul-2010 00:00:00', 'DD-MON-YYYY HH24:MI:SS');;
restore database;
recover database;
release channel t1;
RMAN-00571: ========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ============
RMAN-00571: ========================================================
RMAN-03002: failure of restore command at 21/09/2010 11:01:26
RMAN-06100: no channel to restore a backup or copy of datafile 20
RMAN-06100: no channel to restore a backup or copy of datafile 19
RMAN-06100: no channel to restore a backup or copy of datafile 18
RMAN-06100: no channel to restore a backup or copy of datafile 17
RMAN-06100: no channel to restore a backup or copy of datafile 16
RMAN-06100: no channel to restore a backup or copy of datafile 15
RMAN-06100: no channel to restore a backup or copy of datafile 14
RMAN-06100: no channel to restore a backup or copy of datafile 13
RMAN-06100: no channel to restore a backup or copy of datafile 12
RMAN-06100: no channel to restore a backup or copy of datafile 11
RMAN-06100: no channel to restore a backup or copy of datafile 10
RMAN-06100: no channel to restore a backup or copy of datafile 8
RMAN-06100: no channel to restore a backup or copy of datafile 6
RMAN-06100: no channel to restore a backup or copy of datafile 5
RMAN-06100: no channel to restore a backup or copy of datafile 4
RMAN-06100: no channel to restore a backup or copy of datafile 3
RMAN-06100: no channel to restore a backup or copy of datafile 2
RMAN-06100: no channel to restore a backup or copy of datafile 1
the backup script is as follows:
DB server = jewcsrv3.
Main server = jewcsrv1.
RUN {
echo ALLOCATE CHANNEL ch00
echo TYPE 'SBT_TAPE';
echo SEND 'NB_ORA_CLIENT=jewcsrv3,NB_ORA_SERV=jewcsrv1';
echo BACKUP
echo %BACKUP_TYPE%
echo FORMAT 'bk_u%%u_s%%s_p%%p_t%%t'
echo DATABASE;
echo RELEASE CHANNEL ch00;
echo # Backup Archived Logs
echo # For an offline backup, remove the following sql statement
echo sql 'alter system archive log current';
echo ALLOCATE CHANNEL ch00
echo TYPE 'SBT_TAPE';
echo SEND 'NB_ORA_CLIENT=jewcsrv3,NB_ORA_SERV=jewcsrv1';
echo BACKUP
echo FORMAT 'arch-s%%s-p%%p-t%%t'
echo ARCHIVELOG
echo ALL
echo DELETE INPUT;
echo RELEASE CHANNEL ch00;
echo # Control file backup
echo ALLOCATE CHANNEL ch00
echo TYPE 'SBT_TAPE';
echo SEND 'NB_ORA_CLIENT=jewcsrv3,NB_ORA_SERV=jewcsrv1';
echo BACKUP
echo FORMAT 'bk_u%%u_s%%s_p%%p_t%%t'
echo CURRENT CONTROLFILE;
echo RELEASE CHANNEL ch00;
echo }
Could any one please help me to solve this problem. If there is no solution what could he suggest to do now to have a valid state and for future to avoid this problem.
Thanks alot..
PLEASE REPLY AS SOON AS POSSIBLE
Edited by: 799539 on Oct 4, 2010 12:35 AM

Your BACKUP script does set the NetBackup parameters for the Tape Channels.
However, your RESTORE script does not specify the NetBackup parameters -- so Oracle doesn't know which channel to use for the Restore.
You need to add the NetBackup parameters in the RESTORE.
However, this is suprising :
The problem is that when we came from two weeks vacation, users found that the DB is in old state and we lost the most recent valid stateA database will NOT EVER "go back to an old state" until and unless someone has restored an old backup. If the servers were shutdown for two weeks, who would have restored the database. If the servers were shutdown, how would Oracle have automatically gone back to an old stats ? There must have been some manual actions.
Hemant K Chitale

Automation Problem - Desperate Help Needed

Hi
Was wondering if anyone can help or has had the sameproblem?
I have nearly finished a remix project in Logic and I amcoming to the final stages of automating effects etc.
All of a sudden, my automation is not recording on certain tracks.
I am simply trying to automate the cut-off on the Filterplug-in, but have subsequently realised that it is also happening with volume and any other type of automation.
I thought it might be something to do with the massive synth– but the same is happening with the EXS and ES2 etc.
I have done a lot of testing and opened up a new project andcopied over the settings and midi-regions and automation records absolutely fine!
I even tried to get round it by sending the output to a bus and effecting the bus then trying to automate the bus once adding to the arrange! No Joy! Still failed?!
It seems that it is a bug within my project?!
A black line appears and even if I try and manually drawautomation the line just disappears.
It is definitely not what I am doing, as I have replicated the process in a fresh project and it works fine.
Are you only allowed so many channels of automation?
Funnily, during my testing when I try and delete the trackto start a fresh – it says – 'Do you want to delete automation'! but there isclearly none on display and I am not hearing any!
It feels like a bug – but wondered if anyone else had any issues?
It is only affecting certain tracks, but I cannot see a correlation between them?!
I am about to start replicating everything in a new project! Huge job – but I need to automate forthe final mix and its due by Friday – I am really frustrated by this!
Can Apple help me?
Thanks in advance
Steve

Steve,
I haven't seen this behavior before, but it sounds like a corrupted file. It doesn't happen often, but it does, and can happen.
If you are not having similar problems in a new template, than moving everything over to a new session would be advised, at this point.
Logic 9's new track import feature will make this A LOT easier than it ever was.
Read up on how this is done, but you should be able to copy EVERYTHING over to a new session in one swoop

Expert help needed [createProcessor(myDataSource) + codec]

Dear Expert,
I have a huge problem with the following command
Manager.createProcessor(this.dataSource);
When this.dataSource is created by:
Manager.createDataSource(MediaLocator);
I am capable to add a codec during the configuration of the processor. And the codec is working fine.
However if this.dataSource is my own PushBufferDataSourceWrapper (which contains the original datasource and implements MonitorControl)
the processor is still created the codec is initialized but NEVER accessed...
So now I have either a processor with a DataSourceWrapper and I can 'preview' the image that my webcam is capturing OR
I don't have my preview but my Codec works ...
I want them both!
Probebly I am missing something so if some of you has an example where there is a custom made datasource and a working codec all in one processor I would like to have a copy of your code for investigation.
Or is this an ERROR in JMF? (Threads that doesn't come alive...)
Thanks in advance
(and goodnight)
Peter

PeterYou probably need to use two "DataSource"s (Manager.createClonableDataSource(ds)) and two processors.
One processor is then a player (previewer) and the other is the capturing processor. There is an example on the JavaSoft JMF web site of previewing and capturing at the same time.
Dave

EMU 1212m installation problems! Help needed!

Hello everyone. Hopefully someone can help me out, getting my 1212m back to working.
A month ago, I bought a new computer and I put a EMU 1212m into it. It worked fine, until some other audio devices had bad drivers and made windows crash so many times, I decided to format my hard disk and install XP over again. Well, that worked out fine, computer is running very smoothly but I cant install my 1212m anymore. Windows does find new hardware, which it names "multimedia-audiocontroller, pci slot xx, etc" in the device manager. When I start the EMU setup from the original CD, it says "setup has not detected any supported hardware on your computer" and it closes down right away.
I already tried this:
- multiple installation CD's
- multiple EMU drivers (internet, etc)
- chancing PCI slots
- disabling on-board sound via Bios
- cleaning up registery settings from earlier installation attemps.
- manually select the drivers on the installation CD. It installes the drivers and then Windows says: this device will not start.
I can try whatever I want, but the message keeps on showing up everytime I start a setup. I don't know which actions to take next, so I desperately need some advice here.
any help will be much appreciated!
thanks,
Hugo

I just bought a 1212M and have had similar problems. I assumed the website drivers would be newer than those on the accompanying CD as is the case with most products -- WRONG! I got the same symptoms you describe with the internet drivers, only when I used the CD did it work -- and to my amazement, the CD drivers seems to be newer than the internet downloads (excluding the 2.0 beta drivers of course).
Another complication I had was that I left my perfectly working X-Fi in the computer while installing the 1212M .... the drivers seem to confuse the two cards, which doesn't help. In fairness, the Emu documentation does warn about this, however I eventually got both to work together. If you have a second soundcard in the same computer, even one built into the motherboard, disable it and see if that helps. The Creative (SoundBlaster) drivers are notoriously hard to uninstall cleanly, so if necessary follow Martin Walker's excellent advice over at Sound On Sound (http://www.soundonsound.com/sos/mar0...pcmusician.htm).

Expert help needed with tricky query

I have a query database with a real simple schema but a tricky requirement: i need to display records with a simple select but then filter the result based on the authority/access level of the user making the query.
The source data is held in a table with just the following columns:
SRCTABLE:
subject_ID
date
data_ID
data_item
All column types are text strings and the first 3 are a composite key. There are 10s of millions of records in the table.
The access authorization is held in another table with the following columns:
ACCTABLE:
data_ID
access1
access2
accessn
The ellipsis means there are as many (boolean type) access1...n columns as there are distinct access levels to the source data.
The table contains one row for each distinct data_ID appearing in the source table. On each row the TRUE values in the access1...n columns indicate authorization to see the data item and the filter should leave that row in the result set.
The question then is how to write the query statement? It is assumed that the access id (i.e. the relevant column) is known when the query is made.
Something like
SELECT data_item FROM SRCTABLE
WHERE subject_ID="xxx" AND date = "1/1/2000";
would do it except for the need to filter each row based on the access authorization of the user.
Any help would be appreciated.

Thanks everybody for responding.
APC has a good point about really protecting every single item type separately. Unfortunately this is precisely the case. The security in this case is not oriented to increasing security in a levels oriented way. Rather each kind of item is protected by a need to know type security related to that particular item. Users are classified by their need to know a combination of the item types and those combinations are not in any sense consistent (and there will be new classes over time). This way access control necessarily becomes a matrix of item types vs access classes.
Fortunately this particular database does not exist yet so i am free to solve the problem in any way that fulfills the requirement. This is just the suggested form. I am not entirely happy with it hence the question on this forum in the first place.
So, i appreciate it should you have any further suggestions for optimal solution to handle the requirements. Again, those are:
1. A query that returns the data_items for a given ID and date (this is dead simple)
2. A filter (preferably in the query) that filters out those data_items the current user (his/her access class is known) is not authorized to see.
3. The plan calls for a table listing every possible item type with a column for each access class, enumerating the items allowed for that class. Any other solution to this issue would be acceptable provided it is capable to independently validate any single item type against any access class.
I hope this makes sense.

K9N Neo-F Freeze and restart problem. Help needed!

Hi there,
I recently bought a Mainboard (K9N Neo-F S/N: 601-7260-010K0605023133) that seems to shutdown every now and then. No blue screen... it just freezes for a while and then shuts down. My CPU temperature is very low, I've used a lot of coolingpaste and I have tried every possible way of mounting memorys... 1,2,4... and in different slots. I've run Memtest also. The BIOS-version is the newest according to the Liveupdate-function. The power supply should be enough but I have tested disconnecting everything else then one harddrive and the mobo... doesn't work.
Sometimes it happens with three hours between the occations and sometimes five minutes. Not related to anything special that is done on the computer.
Is this a problem that is common...? Related to hardware or bios...? I would be glad for any advice you could give.
Thanks in advance. Really need help... this drives me mad...
/Christian

I started Orthos and then left the computer alone. Went and watched a film, when I got back after 1 hour and 38 minutes or something like that the computer freezed. I will try leaving it on all night without touching a thing... kind of strange that it happens right when I sit down and move the mouse.
Thanks a lot for trying to help... it's appreciated.
Here's the log:
Type: Large, in-place FFTs - stress some RAM Min: 128 Max: 1024 InPlace: Yes Mem: 8 Time: 15
CPU: 2211MHz FSB: 200MHz [201MHz x 11.0 est.]
CPU: 2211MHz FSB: 0MHz [0MHz x 0.0 est.]
2006-10-16 21:23
Launching 2 threads...
1:Using CPU #0
2:Using CPU #1
1:Beginning a continuous self-test to check your computer.
2:Beginning a continuous self-test to check your computer.
1:Press Stop to end this test.
2:Press Stop to end this test.
1:Test 1, 4000 Lucas-Lehmer iterations of M19922945 using 1024K FFT length.
2:Test 1, 4000 Lucas-Lehmer iterations of M19922945 using 1024K FFT length.
1:Test 2, 4000 Lucas-Lehmer iterations of M19922943 using 1024K FFT length.
2:Test 2, 4000 Lucas-Lehmer iterations of M19922943 using 1024K FFT length.
1:Test 3, 4000 Lucas-Lehmer iterations of M19374367 using 1024K FFT length.
2:Test 3, 4000 Lucas-Lehmer iterations of M19374367 using 1024K FFT length.
1:Test 4, 4000 Lucas-Lehmer iterations of M19174369 using 1024K FFT length.
2:Test 4, 4000 Lucas-Lehmer iterations of M19174369 using 1024K FFT length.
1:Test 5, 4000 Lucas-Lehmer iterations of M18874369 using 1024K FFT length.
2:Test 5, 4000 Lucas-Lehmer iterations of M18874369 using 1024K FFT length.
1:Self-test 1024K passed!
1:Test 1, 4500 Lucas-Lehmer iterations of M17432577 using 896K FFT length.
2:Self-test 1024K passed!
2:Test 1, 4500 Lucas-Lehmer iterations of M17432577 using 896K FFT length.
1:Test 2, 4500 Lucas-Lehmer iterations of M17432575 using 896K FFT length.
2:Test 2, 4500 Lucas-Lehmer iterations of M17432575 using 896K FFT length.
1:Test 3, 4500 Lucas-Lehmer iterations of M17115073 using 896K FFT length.
2:Test 3, 4500 Lucas-Lehmer iterations of M17115073 using 896K FFT length.
1:Test 4, 4500 Lucas-Lehmer iterations of M16815071 using 896K FFT length.
2:Test 4, 4500 Lucas-Lehmer iterations of M16815071 using 896K FFT length.
1:Self-test 896K passed!
1:Test 1, 5300 Lucas-Lehmer iterations of M14942209 using 768K FFT length.
2:Self-test 896K passed!
2:Test 1, 5300 Lucas-Lehmer iterations of M14942209 using 768K FFT length.
1:Test 2, 5300 Lucas-Lehmer iterations of M14942207 using 768K FFT length.
2:Test 2, 5300 Lucas-Lehmer iterations of M14942207 using 768K FFT length.
1:Test 3, 5300 Lucas-Lehmer iterations of M14155777 using 768K FFT length.
2:Test 3, 5300 Lucas-Lehmer iterations of M14155777 using 768K FFT length.
1:Test 4, 5300 Lucas-Lehmer iterations of M14155775 using 768K FFT length.
2:Test 4, 5300 Lucas-Lehmer iterations of M14155775 using 768K FFT length.
1:Self-test 768K passed!
1:Test 1, 6500 Lucas-Lehmer iterations of M12451841 using 640K FFT length.
2:Self-test 768K passed!
2:Test 1, 6500 Lucas-Lehmer iterations of M12451841 using 640K FFT length.
1:Test 2, 6500 Lucas-Lehmer iterations of M12451839 using 640K FFT length.
2:Test 2, 6500 Lucas-Lehmer iterations of M12451839 using 640K FFT length.
1:Test 3, 6500 Lucas-Lehmer iterations of M12196481 using 640K FFT length.
2:Test 3, 6500 Lucas-Lehmer iterations of M12196481 using 640K FFT length.
2:Test 4, 6500 Lucas-Lehmer iterations of M11796481 using 640K FFT length.
1:Test 4, 6500 Lucas-Lehmer iterations of M11796481 using 640K FFT length.
1:Test 5, 6500 Lucas-Lehmer iterations of M11796479 using 640K FFT length.
2:Test 5, 6500 Lucas-Lehmer iterations of M11796479 using 640K FFT length.
1:Self-test 640K passed!
1:Test 1, 7800 Lucas-Lehmer iterations of M9961473 using 512K FFT length.
2:Self-test 640K passed!
2:Test 1, 7800 Lucas-Lehmer iterations of M9961473 using 512K FFT length.
1:Test 2, 7800 Lucas-Lehmer iterations of M9961471 using 512K FFT length.
2:Test 2, 7800 Lucas-Lehmer iterations of M9961471 using 512K FFT length.
1:Test 3, 7800 Lucas-Lehmer iterations of M9837183 using 512K FFT length.
2:Test 3, 7800 Lucas-Lehmer iterations of M9837183 using 512K FFT length.
1:Test 4, 7800 Lucas-Lehmer iterations of M9737185 using 512K FFT length.
2:Test 4, 7800 Lucas-Lehmer iterations of M9737185 using 512K FFT length.
1:Test 5, 7800 Lucas-Lehmer iterations of M9537183 using 512K FFT length.
2:Test 5, 7800 Lucas-Lehmer iterations of M9537183 using 512K FFT length.
1:Self-test 512K passed!
1:Test 1, 9000 Lucas-Lehmer iterations of M8716289 using 448K FFT length.
2:Self-test 512K passed!
2:Test 1, 9000 Lucas-Lehmer iterations of M8716289 using 448K FFT length.
1:Test 2, 9000 Lucas-Lehmer iterations of M8716287 using 448K FFT length.
2:Test 2, 9000 Lucas-Lehmer iterations of M8716287 using 448K FFT length.
1:Test 3, 9000 Lucas-Lehmer iterations of M8516289 using 448K FFT length.
2:Test 3, 9000 Lucas-Lehmer iterations of M8516289 using 448K FFT length.
1:Test 4, 9000 Lucas-Lehmer iterations of M8316287 using 448K FFT length.
2:Test 4, 9000 Lucas-Lehmer iterations of M8316287 using 448K FFT length.

Dear experts help needed in creation of report in hr

Please check the below code.
There is one Transaction code PA20 from these i need the fields in my report.
I tried writing the report but the fields are from structure so please help in creating the report.
I am a beginner so i donno how to find the below fields are coming from which table.
when i do F1 on the fields in PA20 i found the fields but they are from structure.
type-POOLS: SLIS.
TYPES : BEGIN OF TY_P0001,
        PERNR TYPE PERNR_D,      "Personnel Number
        BEGDA TYPE BEGDA,        "Start Date
        BUKRS TYPE BUKRS,        "Company Code
        ENAME TYPE EMNAM,        "Formatted Name of Employee or Applicant
        END OF TY_P0001.
TYPES : BEGIN OF TY_P0016,
        PERNR TYPE PERNR_D,      "Personnel Number
        PRBZT TYPE PRBZT,        "Probationary Period
        CTTYP TYPE CTTYP,        "Contract Type
        END OF TY_P0016.
TYPES: BEGIN OF TY_P9210,
         PERNR TYPE PERNR_D,
        ZTICKET_AMT TYPE ZTICKET_AMT, "Ticket Amount
        END OF TY_P9210.
TYPES : BEGIN OF TY_OUTPUT,
         PERNR TYPE PERNR_D,      "Personnel Number
         BEGDA TYPE BEGDA,        "Start Date
         BUKRS TYPE BUKRS,        "Company Code
         ENAME TYPE EMNAM,        "Formatted Name of Employee or Applicant
         PRBZT TYPE PRBZT,        "Probationary Period
         CTTYP TYPE CTTYP,        "Contract Type
         ZTICKET_AMT TYPE ZTICKET_AMT, "Ticket Amount
        END OF TY_OUTPUT.
DATA: T_P0001 TYPE TY_P0001 OCCURS 1,
       W_P0001 TYPE TY_P0001,
       T_P0016 TYPE TY_P0016 OCCURS 1,
       W_P0016 TYPE TY_P0016,
       T_P9210 TYPE TY_P9210 OCCURS 1,
       W_P9210 TYPE TY_P9210,
       T_OUTPUT TYPE TY_OUTPUT OCCURS 1,
       W_OUTPUT TYPE TY_OUTPUT.
    START-OF-SELECTION.
        SELECT PERNR
               BEGDA
               BUKRS
               ENAME FROM P0001 INTO TABLE T_P0001
               WHERE
                AND BUKRS IN S_BUKRS
                AND BEGDA < '31032007'.
          SELECT PERNR
                 PRBZT
                 CTTYP
                 FROM P0016 INTO TABLE T_P0016
                 FOR ALL ENTRIES IN T_P0001
                 WHERE PERNR = T_P0001-PERNR
          SELECT PERNR
                 ZTICKET_AMT
                 FROM P920 INTO TABLE T_P920
                 FOR ALL ENTRIES IN T_P920
                 WHERE PERNR = T_P0001-PERNR.

use logical data base PNP.
tables: pernr.
infotypes: 0001, 0016, ....
start-of-selection.
get pernr.
here all tables Pxxxx defined as INFOTYPES are filled for the selected PERNR.

Income Tax Calculation problem: Urgent Help Needed

Dear Gurus,
I am facing a unique problem. Our client has two incentives
1) Product Incentive
2) Sales Incentive
Every month incentive figures get changed. These two are Monthly Regular Income (Cumulations Class 24) i.e. included in annual tax calculation.
Now for tax calculation, my client wants "Actual Earning" and "Estimated Earning for the rest of the year" to be different. But Income tax calculation in SAP (for the month of April 2007) takes Actual Earning and multiplied it by 12( i.e. 11+1) to calculate Estimated Earning. But my client wants this Estimated Earning to be different.
Now please let me know is this possible in SAP system and how to calculate this?
Your help will be highly appreciated
Waiting for an early reply.
Thanking You,
With Best Regards,
Pratik

Hi,
I am not understand your problem give your mb then i talk to you
mhpo

Playlist Problem! help needed!

Hi guys. i am writing a playlist where jmf runs all my mp3 from the hard drive. How do i play the next music when the first one is finished. Under controller update, if i use Player.getState() == Player.Prefetched, i'm getting an out of memory after about 10 songs have been played. One more thing. All the media are started with minimum volume. Please advise how i can control the volume level?
-Appreciate it.

Ohhh .. sorry, should have read your question fully. Making the play list is not your problem. Are you recreating the player for each track? are you calling
player.stop() and player.close() at the end of every track, then making a player for the next track? If you aren't then the resources are not being released.
For working with the volume, you need to use a GainControll eg;
GainControl gain = player.getGainControl();
gain.setLevel((volume.getValue()) * 0.3f);

Lightroom 2.3 problem. Help needed.

Hi,
I'm using Lightroom 2.3 on a PC with Windows XP installed and 3GB of ram.
I seem to have run into a problem that I'm hoping someone may be able to help me solve.
Yesterday evening I went to import some images (Raw files) into Lightroom from my external hard drive. I selected the folder and chose the option to import all images within the folder. A message popped up saying they were already in my catalogue so I closed the dialogue box. I looked for them but they weren't in Lightroom so I tried the import again. This time Lightroom just froze up when I selected the images to import. I had to Ctrl-Alt-Delete to end the program.
I relaunched and optimized the catalogue and tried again but Lightroom froze again. I deleted my Lightroom catalogue, the Silvertone folder, uninstalled Lightroom and reinstalled it to start again from scratch with a brand new catalogue.
I tried importing some different photos from a different folder on my external hard drive, the same thing happened again, Lightroom completely froze.
I used Ctrl-Alt-Delete to end the program and relaunched Lightroom. I selected some images from a Compact Flash card that I had in my card reader, Lightroom imported these into the catalogue ok. I tried again with some images from my external hard drive but this time before freezing-up I had a dialogue box appear for a second saying 'Computing dates', but still no imported images and locked-up once again.
Help!!!!
Has anyone any ideas why this is happening and more importantly, how to solve it.
Any help would be much appreciated, thank you.

John,
The images are actually stored on that particular drive and I'm just importing them but leaving them in place.
After successfully importing one lot of images and Lightroom freezing-up again, I deleted the preferences folder once again and launched Lightroom. This time it let me import two folders worth of images in succesion. I then tried to import a third and it did nothing and froze. I once again deleted the preferences file and it allowed me to import.
So it seems I can import one lot of images or even two lots before the problem re-occurs and I have to keep deleting the preferences file before being able to continue.

Expert help needed!!!!Screw It Some help!!

I unplugged my ipod nano from the computer to go to bed then i woke up and all the songs were deleted.! I went to go add all them bak and i couldnt!! PLZ HELP ME!!!
~T Jones

If they aren't in the library, you need to go to your iTunes folder and import them again. Those songs may also be in your trash bin.

Srw.run_report problem. Help needed...Urgent

Hi,
I am very new to Oracle Reports. I need some help in using the srw.run_report
I am having two reports. Rep_A and Rep_B
I will always invoke the Rep_A first...Rep_B should always be invoked in Rep_A
In Rep_A, i need to check a parameter P_Param1 and based upon the value i need to proceed as follows
If P_Param1 = 1 then
--Rep_A should be generated and returned as stream(cache)
--Rep_B shouldnt be invoked
If P_Param1 = 2 then
--Rep_B should be generated and returned as stream.
--Rep_A should not be generated
If P_Param1 = 3 then
--Rep_A and Rep_B should be generated and returned as stream
--(Rep_A followed by Rep_B)
If P_Param1 = 4 then
--Rep_A and Rep_B should be generated and saved as files in a specified location.(this location is in another machine)
This is my requirement. I hope I am clear with my requirement.
How can we achieve these.
Are there any technical issues?
Please guide me
thanks...
siva

Hi all,
just to keep this thread active.
can anyone help me in using srw.run_report.
its an urgent requirement.
thanks...
siva

Expert help needed to create a PDF which mirrors a real book

I am trying to turn my book into a PDF.
Here's the problem: My book is best enjoyed when the pages are side by side because some of the illustrations fill both pages. Unfortunately when I set my Adobe Reader Page Display to Two-Up, the odd numbered pages appear on the left which screws up the illustrations. Needless to say, most books have the odd numbered pages on the right hand side but I can't seem to figure out how to get Adobe Reader to accomplish this.
Since my book was originally formatted in a six-year old version of Quark Express, I tried to insert an extra page in the beginning, but this royally screwed up the illustrations and threw everything out of kilter.
Does anyone have some glorious stroke of genius to help me out of my predicament? Thanks.

>I am looking for the same thing for a stock trading guide that I have written. Please advise.
Did you read all of the answers?
Aandi Inston

Swing+IE=problems! *expert help needed*

Similar Messages

Maybe you are looking for

Swing+IE=problems! expert help needed