Switch Layout in SU53 screen

Hi All,
We are on ECC 5.0. I knew that there will be a button in SU53 screen to change the layout from a Classic to Tree structure and vice versa. I also know about the parameter that can be set in user's account parameters for changing this.
But, I can't see the Switch Layout button in the SU53 screen irrespective of the user and the parameter setting.
I can see the button in ECC 6.0.
Please help me to switch layout in Ecc 5.0.
Thanks
Vijay

Hi,
SAP Note 968915 mentions about absence of switch layout button. Please check if it's applicable for your patch levels and system release.
Also, SAP Note 1008990 is to be followed up in case the one above solves your issue.
Award points if found usefull.
regards, Shantanu

Similar Messages

How can i set a layout for MIGO screen

Hello all,
How can i set a layout for MIGO screen. & make that layout default. Like i want to drag Requistioner column next to quantity in MIgo screen. temporarily I can drag but is there a way to save as layout & save it.

Hi
First you arrange however you want and then go to table settings which is there in the right corner of the item details and create a variant and save.
Find a button with blue yellow and white at the top end above the vertical drag bar when put the cursor it will show you as Configuration.
After creating the variant tick the check box use as standard setting below the variant
Hope it helps
Edited by: Girish Adaviswamy on Mar 3, 2010 1:27 PM

Layout problem in screen painter

hi all,
the screen is not appearing when i click 'layout' button in screen painter when i am enabling a wsp client proxy server. Is there any solution?

some times SAP Gui behaves like this, in my case i faced this problem many times, some times after shutdown my sap logon pad. and restart the sap , go to se51 , it will open the Screen painter normally. But some cases i uninstalled the Gui, and re installed .then only it opens properly. select all components when installing.

How to switch off my main screen (Imac 24") to use an external proyector?

Please Help!
How to switch off my main screen (Imac 24") to use an external proyector?
It's not comfortable when you want to see a nice movie!
Thanks
Jack

As I already said in my first reply post, you cannot turn off the iMac's display. The best you can do is display black, which many applications that have a +full screen+ mode will do, if the full screen mode is on the other display.
Alternately, you can move the menu bar (along with Dock and disk icons) from the iMac's screen to the second display. This is done in System Preferences Displays pane Arrangement tab, by dragging the white bar in the diagram from one screen to the other. Once the menu bar and other features are on the second display, the only thing showing on the iMac's display should be the Desktop background. If you pick a Desktop background that is all black, your iMac's display will be showing a black screen (although it will still not be turned off).

Set Default Layout in Selection Screen of FBL3N

Dear All,
Here in FBL3N presently i we have a default layout is /balaji.
But now i want to change this as a standard layout 1sap.
I can try this in path SETTING->ADMINISTRATOR->SET DEFAULT LAYOUT.
But after done this and save this procedure when i run this Transaction again
no change effected.
Means my change is not effect in selection screen of FBL3N.
So can anybody tell me how can i change my default layout in selection screen of FBL3N .
Please kindly help me ....
Thanks
Keyur

Hi,
Try with below navigation
Run the report and go to the menu settings->Layout->Choose
and also go through this link
http://wiki.sdn.sap.com/wiki/display/ERPFI/Howtochange-setdefaultlayoutintransactionFBL1N%2CFBL3NandFBL5N
regards
kk

How to Change layout in MIRO screen?

Hi,
I need to change the MIRO screen layout. But i understand that it is not possible from MM. Can anyone guide me where can i do this change? it will be a great help if anyone guide me on this.
Thanks
Sunil

For MIRO, you can use tcode OLMRLIST, to create screen variant.
OR
For changing any layout of the Screen you have to create a Screen Variant or you can change the Standard Screen Variant (Basic Settings i.e the Standard screen variant. )
Procedure:
1) Use T-Code SHD0 and give the Transaction code : MIRO,
2) Go to the Screen Variant TAB
3) Select the Screen variant from the Possible List of Entries
4) If u want to EDIT the existing screen Just Click on the Change mode
5) It is not recommended to change the Basic Settings you can create with Z<Screen Variant>.
6) Click on create it will open the T-Code MIRO, Just click BACK button or Function Key F3 it will show you fields of the that Screen
7) Select which one you want to make Invincible or Required fields.
8) Save & Activate the Variant.
Also, refer link for understanding: -[SHD0 Variant |http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/a070bfbb-d34a-2d10-b092-ecbe0b0d4a4c]
Thanks & Regards
JP

Facing problem with layout editor in screen painter .

Hi gurus,
I have installed IDES ECC 6.0 in my home system. Now when I go to layout editor in screen painter, I am getting rows in the screen. As per my knowledge there is an installation problem ..How to rectify that ? Could any one please tell me.
Thanks & Regards
Vardhan

some times SAP Gui behaves like this, in my case i faced this problem many times, some times after shutdown my sap logon pad. and restart the sap , go to se51 , it will open the Screen painter normally. But some cases i uninstalled the Gui, and re installed .then only it opens properly. select all components when installing.

Subnet config and switch layout for windows 2012 ISCSI server

I would like to ask about subnet design and switch layout in regards to using a Windows 2012 ISCSI solution. When you guys design subnets for ISCSI configurations do you use one subnet or multiple subnets? Also do you link the switches together when
designing your ISCSI layouts? These types of things are normally discussed in vendor deployment guides. However, I have not come across a best practices guide for deploying Server 2012 ISCSI.

I would like to ask about subnet design and switch layout in regards to using a Windows 2012 ISCSI solution. When you guys design subnets for ISCSI configurations do you use one subnet or multiple subnets? Also do you link the switches together
when designing your ISCSI layouts? These types of things are normally discussed in vendor deployment guides. However, I have not come across a best practices guide for deploying Server 2012 ISCSI.
For iSCSI you typically create a separate subnets around physical NICs you use for iSCSI traffic (assuming they are used by iSCSI target for MPIO of course). Here are few guides on how to do that (some for Windows Server 2008 R2 but you can ignore that fact
as target itself did not change much and concepts are still the same). See:
Configure iSCSI MPIO on Windows (full)
http://blogs.technet.com/b/migreene/archive/2009/08/29/3277914.aspx
(make sure you have at leas one connection before you try to enable MPIO)
Setting up a Target and Initiator
http://www.server-log.com/blog/2011/7/26/setting-up-an-microsoft-iscsi-target-and-initiator-using-mpi.html
You need however be aware of a couple of facts...
1) MSFT does not see much future in iSCSI and is replacing it with SMB3 where it can. So if you want to use iSCSI to provide shared storage to your guest VMs you need to use shared VHDX hosted on SMB3 share, see:
Shared VHDX for guest VM Cluster
http://technet.microsoft.com/en-us/library/dn265980.aspx
If you plan to use iSCSI to host CSV and VM images there you again can use SMB3 share, see:
Hyper-V over SMB
http://technet.microsoft.com/en-us/library/jj134187.aspx
That's both simpler to manage (you don't configure anything except teaming for NICs to enable SMB Multichannel and create a shared folder in a few clicks) and faster: MSFT iSCSI target is not cached @ server side while (OK, Hyper-V ovens VMs in a pass-thru
mode but other users typically don't do that). SQL Server is the same as Hyper-V in terms of SMB3 support, Windows clusters support SMB3 share as a witness and so on.
2) That's a single point of failure. Think about using SoFS instead of a single SMB3 share and think about clustering your target (you'll need a separate fault tolerant back end of that) to increase uptime. See:
MSFT iSCSI Target Failover Cluster
http://techontip.wordpress.com/2011/05/03/microsoft-iscsi-target-cluster-building-walkthrough/
Good luck! :)
StarWind VSAN [Virtual SAN] clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts.

My Z10 no longer switches to a horizonal screen when typing or viewing videos How do I fix this?

My Z10 no longer switches to a horizontal screen when typing texts, email, etc. or for viewing videos. How do I fix this?

Go into your notification tray and turn the Rotation lock back on

Switch layout suggestion

Hello,
my company is planning to move the server room between floors and, with this opportunity I'd like to review the switch layout in order to improve it.
After some "scouting" (Well, I'm not a networking expert) I came up with the following layout
Hello,
my company is planning to move the server room between floors and, with this opportunity I'd like to review the switch layout in order to improve it.
After some "scouting" (Well, I'm not a networking expert) I came up with the following layout
Starting from top:
- my firewall comes with an internal NIC that I will connect to the main switch (Linksys SGE2000 - SWITCH0) connected with the uplink port (using a Cat5e cable or a fiber cable)to another SGE2000 (SWITCH1) acting as a bigger single unit (to which I will connect all the servers)
- The lower layer are 3 switches
- SWITCH2 - Linksys SLM48G 10/100
- SWITCH3 - 3Com 48p 10/100
- SWITCH4 - 2x 3Com 24p 10/100 Stacked with a stacking module (old but rock-solid)
that will serve all LAN clients (Desktops, notebooks, printers, voip phones etc...)
Does this configuration can be considered as "valid"? (Blue and green cables are my personal redundancy concept:))
Is it recommended also to inter connect SWITCH2-3-4 between themselves?
Thanks in advance for any suggestion!
Renato

Prodeguerriero wrote:
Hi there. Something strange has happened to me using my Macbook Pro. My Hard Drive disappeared from desktop and finder. I found out that somehow it has the "hidden" flag. Once I found this out, I tried to erase it but, when the terminal asks me my password, it doesn't accept any input at all. Any key I press, or any string I try to copy doesn't appear.
that's normal and is a security feature.
to make your drive visible enter the following terminal command
sudo chflags 0 /volumes/*
The only thing I can do is press enter, receiving the "wrong password" warning. I tried to switch keyboard layout but nothing happens.
Any suggestion?

IPhone 3GS stuck and I cannot switch it off. Screen shows an USB plug connecting to iTunes.

My iPhone 3GS stuck and i cannot switch it off. Screen shows an USB plug connecting to iTunes.

this usually appears when your iphone is not registered correctly with apple/itunes so plug it in to your computer and try setting it up if it gives you the correct prompt. if not try to restore and sync. usually tis problem appears when your iphone has no sim card or is not registered correctly. in this case you need to contact your carrier and set up an account. if you are trying to use it without a service or sim card then unless you go through some sketchy program of hacking it it is worthless to you without a sim or service plan. i have the original iphone1 i got from a buddy of mine i used as an ipod before getting an iphone4 and if i took the sim out this message appears. if you do have a sim and a service plan than there might be a problem with the phone reading the sim card you you can go into your service provider's store and request a new sim to see if that works.
I am sorry if none of this is helpful for i have no other suggestions.

Keyboard shortcut to switch Spotify to full screen

Hi, there's a custom keyboard shortcut in OSX which lets you switch apps to full screen. It doesn't work with all apps but I think it would be nice if Spotify would make this functional in their Mac app. Looking forward for this to work.

Hey there!
You should sumbit this as an idea (or a bug, if this is supposed to work), instead of the Help section.
Good luck with this!

WiFi issue: Is it possible to change WiFi settings in a way that it does not switch off in the screen-lock mode?

I have iPhone 4 and 4s. WiFi is automatically switching off on both phones when they are inactive (screens are locked). It is connecting back after some seconds I unlocke the phone. But because I have no subscribtion for the Cellular data usage, I am being cuted from Internet all screen-locked period. All that time people are not able to reach me by email, skype, or other programs using Internet. It is quite uncomfortable, especially when waiting for something important! Is there a way to change this setting?

The iPhone does not shut down WiFi completely when asleep. It does use a power conservation mode. You should still receive notifications. There is no setting for this. It should work for you as it does for me if you don't have a network problem.
There are lots of problems reported with D-Link routers and they don't have a great reputation. If there is no help available from D-Link you may want to consider installing the DD-WRT firmware. It's available for the D-Link 615. See here for information: http://www.dd-wrt.com/site/index
By the way, you do have Notifications enabled for the Apps you are talking about right? See Settings -> Notifications and Mail, etc.

Is there any way on Mountain Lion to get the dashboard to overlay my open windows but not switch me to another screen?

I love the idea of widgets on Mountain Lion but when I try to open the dashboard I am always redirected to another screen that pulls them up. Is there any way to have the dashboard show up like the launchpad does, as a screen that overlays my current work but doesn't change my screen? I want to be able to check out information at a glance or write on a sticky note without having to manuever over to another window and then switch back. I saw this done by another Mac user but idk if they had Mountain Lion. All help would be GREATLY appreciated.

Great tip, found this thread on Google, and it answered my exact same question!

How to switch off internal macbook screen when using external monitor(s)

as far as i observed, adding external displays ( running different screens on them, not mirroring) to a macbook pro increases the gpu workload and with that comes temperature rise in the laptop and increase in ventilator noise - and probably increased hardware aging and risk of component faillure due to high temperature inside the laptop.
simply try connecting two external 27" screens and open some flash video on both of them. then run a temperature monitoring software and watch temps rise, compared to running same flash videos / demanding tasks only on one connected external screen or only on the laptop screen with no external monitor connected.
especially in mavericks, due to its increased background routines, such a set-up appears ever the more taxing, then again who does not love apple`s nice adds showing laptops with two 27” screens connected to it and the workspace vision they invoke....
i have seen temps around 100° to 102° celsius on a 13" macbook pro 2012 edition, which i would expect is territory where the cpu / gpu temp safety switches will trigger system shutdown any time soon ( hardware status before verified as fully in order by apple service and default osx installation)
imagine your anti-virus software starting some realtime content screening while runnign some demanding tasks already and the system shuts down easily (all such situation observed in reality)
(would be interesting to see how a retina display macbook fares with 2 external monitors running demanding tasks, considering the retina display already increased taxing for the gpu - any experience from users of such a setup would be very much appreciated as it will provide critical purchase decision intelligence for all of us envisioning a retina-book and two big screens adoring our desks...)
turning down the macbook`s built-in screen`s backlight may reduce power consumption but i have not seen any evidence that it switches off the gpu-to-screen feed and respective gpu load - it certainly did not prevent gpu, cpu, board, etc temps to rise to borderline levels.
so the key question here is, how to switch off the macbook pro`s built-in screen in order to avoid gpu cycles being wasted on that screen ( and the resulting heat developments) when working with big external screen(s) connected to the laptop ?

this thread talks about running several monitors as advertised by apple and running demanding task on them.
with the lid open, the keyboard offers a very efficiant heat escape vector, which is blocked when the lid is closed - this is a basic and commonsense insulation effect. this thread also mentions the use of temperature monitoring software and thus a repeatable test setup. the temps recorded were also mentioned. they rose when the lid was closed, the running task remaining unchanged. as far as i could track down the cpus in discussion will shut down around the 105 degree celsius range. i observed system shut downs when the system approached 103° celsius. not to mention that the fans will run loud well before that.
again this is on hardware checked and ok-ed by apple service.
the question still welcoming an expert answer: is there any way to switch off the built-in macbook monitor while the lid is open ?

Switch Layout in SU53 screen

Similar Messages

Maybe you are looking for