Sync time duration

Hi, I have a question concerning the sync time.
Our current application uses 5 (developed) SyncBOs, each sync we have all in all about 500 records that are moved splitted on these syncbos.
Currently a sync action takes about 1min which seems quite long for me. I analyzed the time and noticed that after I started the SYNC on the Client it takes about 20seconds until the first syncbo is shown up on merep_mon (I just refreshed every second manually to check it). then it takes up to 5seconds to process all syncbos (which is ok) and again it takes another 20-30 seconds until the device is ready again.
On time I just disconnected the device from the network after the syncbos where processed and sent out again but before the device itself told me it was ready. And guess what, all records where already stored correctly on the device?!
Is there any setting I didn't figure out right now that can improve this time lags?
by the way, we are using MI7.0 SP12 with Creme3.27a on a WinCe 5 device.
BR,
Enzo

Hi,
When you are in Asynchronous mode of sync:
Dont go by merep_mon but instead keep doing sync frome the client and then measure the time once you get the data of all 500 records to the client. So basically its the time from when you do the initial sync for data and then keep resynching until you get the actual data.
The reason behind it is simple. First time you do a sync, there will be requests for all the syncbo's in merep_mon in the waiting state and once they are moved to finished state, you can sync from the client second time and you will get the data on to the device. Make a note that the records in outbound will still be in waiting state until you sync 3rd time because only once the client sends the confirmation to the middleware
that it has got the data then the records in the outbound will be moved to send state.
So the best option i would suggest is make your application to synchronize with the middleware in synchronous mode. In this case in just one sync you will get data so you can eassily calcualte the time between when the sync starts and the sync ends and that will be the actual time of sync.
To make your application work in sync mode, i think in merep_meta.xml file of your application you have to change the sync mode of each syncbo to SYNC instead of ASYNC and also i think you have alternate ways of doing it but thats the one way you can do it.
Hope it helps.
Best Regards,
Siva.

Similar Messages

How to calculate the time duration on a datetime column?

Hi guys,
I've done some search on this forum and everywhere else but I can't seem to get this right, at the beggining it sounded like something very simple to accomplish, for the instance with Excel but I'm struggling to get it to work with Crystal Reports on Microsoft Visual Studio 2008.
I have a datetime column (SQL Server 2000) that I wanted to calculate the the time duration on the report group footer, unfortunatelly the built-in SUM function cannot be applied and I've tried several formulas that I've found on the internet without any luck. I'm using a datetime column to store only the time because I'm stuck with SQL Server 2000 which doesn't have a time data type.
Would you guys know how to do it by any chance?
Some sample code I've tried: http://www.minisolve.com/TipsAddUpTime.htm
Thanks a lot,
Paul
Edited by: Paul Doe on Dec 12, 2009 5:41 PM
Some sample data:
EMPLOYEE     WORK HOURS
=========     =================
JOHN DOE      1900-01-01 01:00:05
JOHN DOE      1900-01-01 00:20:00
JOHN DOE      1900-01-01 01:30:15
=========     =================
HOURS WORKED: 02:50:20
Edited by: Paul Doe on Dec 12, 2009 5:42 PM
Edited by: Paul Doe on Dec 12, 2009 5:45 PM

Guess what, by further testing the code on the website mentioned above I got it working.
Pus, I needed to change the grouping on the code, so I had to come up with a way to update the formulas based on the groupping field.
Considering "call_date" is the field that you are groupping by on the designer use the following code to update the formula:
CrystalReportObj = new ReportDocument();
CrystalReportObj.Load("C:\\reportfile.rpt");
FieldDefinition FieldDef;
//Get formula
FormulaFieldDefinition FormulaDef1;
FormulaDef1 = CrystalReportObj.DataDefinition.FormulaFields["SubHours"];
//Get formula
FormulaFieldDefinition FormulaDef2;
FormulaDef2 = CrystalReportObj.DataDefinition.FormulaFields["subMinSec"];
//Update the formula to work with the new grouping field,
//this must be called first else will throw an exception
FormulaDef1.Text = FormulaDef1.Text.Replace("call_date", "call_extension");
FormulaDef2.Text = FormulaDef2.Text.Replace("call_date", "call_extension");
//Get the new field we are grouping by
FieldDef = CrystalReportObj.Database.Tables[0].Fields["call_extension"];
//Replace current grouping field with the new one,
//considering there only one group in the report, index 0
CrystalReportObj.DataDefinition.Groups[0].ConditionField = FieldDef;
Have fun.
Edited by: Paul Doe on Dec 12, 2009 8:43 PM
Edited by: Paul Doe on Dec 12, 2009 8:53 PM

How to find out the top 10 data loads based on time duration?.

Hi,
We are working on performance tuning. so we want to find out the top 10 loads which had run long time in date wise.
We need the load start time and end time of the load process, Infosource and datatarget name.
There are nearly 1000 loads, So it is very difficult to collect the load's timings in RSMO.
Is there any another alternative to collect the top 10 loads based on time duration in date wise?
Thanks & Regards,
Raju

Hi Gangaraju,
You can install BI Statistics for getting these type of data.
Or you check in RSDDSTAT or RSMDATASTATE_EXT or table for the Load process time.
Or goto t-code ST13 to get detailed analysis of a Process chain for a given period.
Hope this helps.
Regards,
Ravi Kanth

Is it possible to sync time capsule data to a external hard drive

Is it possible to sync time capsule data to a external hard drive connected to time capsule via usb. (as an precaution just incase time capsule fails)
Thanks

Yes, if the USB drive has been previously formatted correctly in Mac OS Extended (Journaled) format.
Open AirPort Utility - Click Manual Setup
Click the Disks icon
Click the Disks tab below the icon
Click Archive
Allow plenty of time for the copy process to occur. You will not be able to make Time Machine backups from your Mac until the Archive process has completed.

Need help with long sync times - busy optimizing unchanged pictures

Before the latest update I was having a problem with long sync times, often with time spent optimizing pictures that hadn't changed since the last sync. This morning I did the latest update and now it's going on hours updating. Again, optimizing >8000 pics, none of which have changed since yesterday's sync.
Any suggestions as to what to do? Thanks.

Yes I plug the IPOD into the USB port. Today it is a little worse. When I plug it in it will sync for a moment, pop the message that says IPOD IS SYNCED TO ANOTHER COMPUTER DO YOU WANT TO SYNC TO THIS COMPUTER. If I say yes it immediately says FILE NOT FOUND. The whole page locks up and I have to shut the computer down and restart.
Sometimes it just recgonizes the named of the IPOD then immediatel disconnets it. I am so frustrated with this POS and copy protection and all the other things Apple is doing to ensure there songs are not stolen. It is a PAIN and now this...149.00 gone down the tube.

How to display time duration (NOT dates) with an input mask in a JTable?

Background: I am trying to display in a JTable, in two columns, the start position and time duration of an audio clip.
They are stored as type float internally eg. startPosition = 72.7 seconds.
However I wish to display on screen in the table in HH:mm:ss:S format. eg. 00:01:12:7. The user can edit the cell and input values to update the internal member fields.
Problem: I am finding it very difficult to implement this - what with the interactions of MaskFormatter, DefaultCellEditor etc.
Also using SimpleDateFormat and DateFormatter does not work as they insist on displaying the day, month, year also in the table cell.
Taking the Swing Tutorial TableFTFEditDemo example as a template,
(http://java.sun.com/docs/books/tutorial/uiswing/components/example-1dot4/index.html#TableFTFEditDemo)
does anyone know how to do this?
I can post my (buggy) modifications to the example code - if it would help.
Appreciate any help.
thanks,
Anil

Here are my modifications to the TableFTFEditDemo example. If you run it, you get an exception
like java.lang.NumberFormatException: For input string: "18:00:03.500"
The two modified classes are taken from the Tutorial and are listed below:
=================
* IntegerEditor is a 1.4 class used by TableFTFEditDemo.java.
import javax.swing.AbstractAction;
import javax.swing.BorderFactory;
import javax.swing.DefaultCellEditor;
import javax.swing.JFormattedTextField;
import javax.swing.JOptionPane;
import javax.swing.JTable;
import javax.swing.JTextField;
import javax.swing.KeyStroke;
import javax.swing.SwingUtilities;
import java.awt.event.ActionEvent;
import java.awt.event.KeyEvent;
import java.awt.Color;
import java.awt.Component;
import java.awt.Toolkit;
import java.text.DateFormat;
import java.text.NumberFormat;
import java.text.ParseException;
import java.text.SimpleDateFormat;
import java.util.Calendar;
import java.util.Date;
import javax.swing.text.DateFormatter;
import javax.swing.text.DefaultFormatterFactory;
import javax.swing.text.MaskFormatter;
import javax.swing.text.NumberFormatter;
class TimeRenderer {
     float seconds;
     TimeRenderer(String str) {
          int hSec = Integer.parseInt(str.substring(0,2)) * 60 * 60;
          int mSec = Integer.parseInt(str.substring(2,4)) * 60;
          int sSec = Integer.parseInt(str.substring(4,6));
          float tSec = Integer.parseInt(str.substring(6,7))/10.0F;
          seconds = hSec + mSec + sSec + tSec;
* Implements a cell editor that uses a formatted text field to edit Integer
* values.
public class IntegerEditor extends DefaultCellEditor {
     JFormattedTextField ftf;
     static Date zeroTime = new Date(0L);
     private boolean DEBUG = true;
     SimpleDateFormat sdf = new SimpleDateFormat("HH:mm:ss.S");
     MaskFormatter maskFo = new MaskFormatter("##:##:##.#");
     protected MaskFormatter createFormatter(String s) {
          MaskFormatter formatter = null;
          try {
               formatter = new MaskFormatter(s);
          } catch (java.text.ParseException exc) {
               System.err.println("formatter is bad: " + exc.getMessage());
               System.exit(-1);
          return formatter;
     public IntegerEditor(int min, int max) throws ParseException {
          super(new JFormattedTextField(new MaskFormatter("##:##:##.#")));
          ftf = (JFormattedTextField) getComponent();
          // Set up the editor for the cells.
          ftf.setFormatterFactory(new DefaultFormatterFactory(new DateFormatter(sdf)));
          ftf.setFocusLostBehavior(JFormattedTextField.PERSIST);
          // React when the user presses Enter while the editor is
          // active. (Tab is handled as specified by
          // JFormattedTextField's focusLostBehavior property.)
          ftf.getInputMap().put(KeyStroke.getKeyStroke(KeyEvent.VK_ENTER, 0), "check");
          ftf.getActionMap().put("check", new AbstractAction() {
               public void actionPerformed(ActionEvent e) {
                    if (!ftf.isEditValid()) { // The text is invalid.
                         ftf.setBorder(BorderFactory.createLineBorder(Color.RED));
                         ftf.setBackground(Color.PINK);
                         ftf.postActionEvent(); // inform the editor
                    } else
                         try { // The text is valid,
                              ftf.commitEdit(); // so use it.
                              ftf.postActionEvent(); // stop editing
                         } catch (java.text.ParseException exc) {
     // Override to invoke setValue on the formatted text field.
     public Component getTableCellEditorComponent(JTable table, Object value,
               boolean isSelected, int row, int column) {
          JFormattedTextField ftf = (JFormattedTextField) super
                    .getTableCellEditorComponent(table, value, isSelected, row, column);
          System.out.println("value:" + value);
//          long milliseconds =(long) (Float.parseFloat(value.toString()) * 1000);
          long milliseconds =(long) (((Float) value).floatValue() * 1000);
          Date dt = new Date(milliseconds);
          ftf.setValue(dt);
          return ftf;
     // Override to ensure that the value remains an Integer.
     public Object getCellEditorValue() {
          JFormattedTextField ftf = (JFormattedTextField) getComponent();
          Object o = ftf.getValue();
          try {
               Calendar cal = Calendar.getInstance();
               cal.setTime((Date)o);
               float seconds = cal.getTimeInMillis()/1000.0F;
               return sdf.format(o);
               //return new Float(seconds);
          } catch (Exception exc) {
               System.err.println("getCellEditorValue: can't parse o: " + o);
               exc.printStackTrace();
               return null;
     // Override to check whether the edit is valid,
     // setting the value if it is and complaining if
     // it isn't. If it's OK for the editor to go
     // away, we need to invoke the superclass's version
     // of this method so that everything gets cleaned up.
     public boolean stopCellEditing() {
          JFormattedTextField ftf = (JFormattedTextField) getComponent();
          if (ftf.isEditValid()) {
               try {
                    ftf.commitEdit();
               } catch (java.text.ParseException exc) {
          } else { // text is invalid
               ftf.setBorder(BorderFactory.createLineBorder(Color.RED));
               ftf.setBackground(Color.PINK);
               return false; // don't let the editor go away
          return super.stopCellEditing();
//=====================================================
* TableFTFEditDemo.java is a 1.4 application that requires one other file:
*   IntegerEditor.java
import javax.swing.JFrame;
import javax.swing.JDialog;
import javax.swing.JPanel;
import javax.swing.JScrollPane;
import javax.swing.JTable;
import javax.swing.table.AbstractTableModel;
import java.awt.Dimension;
import java.awt.GridLayout;
import java.text.ParseException;
* This is exactly like TableDemo, except that it uses a
* custom cell editor to validate integer input.
public class TableFTFEditDemo extends JPanel {
    private boolean DEBUG = false;
    public TableFTFEditDemo() throws ParseException {
        super(new GridLayout(1,0));
        JTable table = new JTable(new MyTableModel());
        table.setPreferredScrollableViewportSize(new Dimension(500, 70));
        //Create the scroll pane and add the table to it.
        JScrollPane scrollPane = new JScrollPane(table);
        //Set up stricter input validation for the integer column.
     //   table.setDefaultEditor(Float.class,
       //                        new IntegerEditor(0, 100));
     //If we didn't want this editor to be used for other
     //Integer columns, we'd do this:
     table.getColumnModel().getColumn(3).setCellEditor(
          new IntegerEditor(0, 100));
        //Add the scroll pane to this panel.
        add(scrollPane);
    class MyTableModel extends AbstractTableModel {
        private String[] columnNames = {"First Name",
                                        "Last Name",
                                        "Sport",
                                        "# of Years",
                                        "Vegetarian"};
        private Object[][] data = {
            {"Mary", "Campione",
             "Snowboarding", new Float(5.7), new Boolean(false)},
            {"Alison", "Huml",
             "Rowing", new Float(3.5), new Boolean(true)},
            {"Kathy", "Walrath",
             "Knitting", new Float(2.9), new Boolean(false)},
            {"Sharon", "Zakhour",
             "Speed reading", new Float(20.8), new Boolean(true)},
            {"Philip", "Milne",
             "Pool", new Float(10.5), new Boolean(false)}
        public int getColumnCount() {
            return columnNames.length;
        public int getRowCount() {
            return data.length;
        public String getColumnName(int col) {
            return columnNames[col];
        public Object getValueAt(int row, int col) {
            return data[row][col];
         * JTable uses this method to determine the default renderer/
         * editor for each cell. If we didn't implement this method,
         * then the last column would contain text ("true"/"false"),
         * rather than a check box.
        public Class getColumnClass(int c) {
             Object obj = getValueAt(0, c);
             System.out.println("getColumnClass.obj:" + obj);
            return obj.getClass();
        public boolean isCellEditable(int row, int col) {
            //Note that the data/cell address is constant,
            //no matter where the cell appears onscreen.
            if (col < 2) {
                return false;
            } else {
                return true;
        public void setValueAt(Object value, int row, int col) {
            if (DEBUG) {
                System.out.println("Setting value at " + row + "," + col
                                   + " to " + value
                                   + " (an instance of "
                                   + value.getClass() + ")");
            data[row][col] = value;
            fireTableCellUpdated(row, col);
            if (DEBUG) {
                System.out.println("New value of data:");
                printDebugData();
        private void printDebugData() {
            int numRows = getRowCount();
            int numCols = getColumnCount();
            for (int i=0; i < numRows; i++) {
                System.out.print("    row " + i + ":");
                for (int j=0; j < numCols; j++) {
                    System.out.print(" " + data[i][j]);
                System.out.println();
            System.out.println("--------------------------");
     * Create the GUI and show it. For thread safety,
     * this method should be invoked from the
     * event-dispatching thread.
     * @throws ParseException
    private static void createAndShowGUI() throws ParseException {
        //Make sure we have nice window decorations.
        JFrame.setDefaultLookAndFeelDecorated(true);
        //Create and set up the window.
        JFrame frame = new JFrame("TableFTFEditDemo");
        frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        //Create and set up the content pane.
        TableFTFEditDemo newContentPane = new TableFTFEditDemo();
        newContentPane.setOpaque(true); //content panes must be opaque
        frame.setContentPane(newContentPane);
        //Display the window.
        frame.pack();
        frame.setVisible(true);
    public static void main(String[] args) {
        //Schedule a job for the event-dispatching thread:
        //creating and showing this application's GUI.
        javax.swing.SwingUtilities.invokeLater(new Runnable() {
            public void run() {
                try {
                         createAndShowGUI();
                    } catch (ParseException e) {
                         // TODO Auto-generated catch block
                         e.printStackTrace();
}

Time duration for Process.waitFor() to wait.

Can we specify the time duration for the Process.waitFor() after which it resumes?
          Runtime rt=Runtime.getRuntime();
          Process ps=rt.exec("some command");
          ps.waitFor();
Like here if rt.exec() is taking a lot of time to execute, the ps should wait for a certain period of time for rt to execute and if rt doesnt complete within the specified time then ps should resume.

I don't know exactly what you are doing but what about: wait(long timeout);

Record time duration for fax in vxml

I am going to get the time duration used for fax sending in vxml:
<transfer name="mycall" destexpr="'fax://' + phone_num" bridge="false" connecttimeout="120s" maxtime="180s" cisco-longpound="true" cisco-mailtoaddress="'xxxx'" >
<catch event="telephone.disconnect.transfer">
<assign name="mydur" expr="mycall$.duration"/>
<goto next="#timeCount"/>
</catch>
</transfer>
<var name="startTime" expr="new Date();"/>
<var name="endTime"/>
<form id="timeCount">
<block>
<assign name="document.startTime" expr="startTime.getTime();"/>
<assign name="document.startTime" expr="Number(startTime);"/>
<assign name="document.endTime" expr="new Date();"/>
<assign name="document.endTime" expr="endTime.getTime();"/>
<assign name="document.endTime" expr="Number(endTime);"/>
<assign name="mydur" expr="document.endTime - document.startTime;"/>
</block>
</form>
But mycall$.duration is 0 after transferring fax.
And even if I use codes to count time duration, the duration, mydur, is about the same regardless of the number of pages sent.
Is it possible to use vxml to record time duration of fax?
Thank you!

Paste the following Config:
sh ver
sh run
debug of one call demonstrating the problem :
debug voip ivr all
debug vxml all

Time duration of events

Hello,
I am accessing an Oracle 10.2.0.1.0 Database
I have the following tables
CREATE TABLE BT_MAPPING
( "TAG_ID" NUMBER(6,0) NOT NULL ENABLE,
"TAG_NAME" VARCHAR2(30 BYTE) NOT NULL ENABLE,
"TAG_DESCRIP" VARCHAR2(100 BYTE),
"TAG_SRC1" VARCHAR2(30 BYTE),
"TAG_SRC2" VARCHAR2(30 BYTE),
"TAG_GRP_ID" NUMBER(4,0),
"TAG_TYPE" VARCHAR2(2 BYTE),
"TAG_DB" NUMBER(12,6),
"TAG_ZERO" NUMBER(12,6),
"TAG_SPAN" NUMBER(12,6),
"TAG_EU" VARCHAR2(10 BYTE),
"TAG_MIN" CHAR(1 BYTE),
"TAG_MAX" CHAR(1 BYTE),
"TAG_AVG" CHAR(1 BYTE),
"TAG_DCM" NUMBER(4,0),
"TAG_TYPE_ID" NUMBER(4,0),
"TAG_TOTAL" CHAR(1 BYTE)
and
CREATE TABLE MT_ANALOGUE
( "TAG_ID" NUMBER(6,0) NOT NULL ENABLE,
"TAG_DATE" DATE NOT NULL ENABLE,
"TAG_VALUE" NUMBER(12,6),
"TAG_QUALITY" NUMBER(6,0),
"TAG_ADJUST_FLAG" CHAR(1 BYTE)
I need to run a query that would return the tag_id, tag_name, tag_descrip from the bt_mapping table and the tag_date, tag_value from the analogue table when the tag_value is over .10 for the tags that are named BR_FL00_NI to BR_FL14_NI. I have the following which seems to work.
SELECT
BT.TAG_ID "TAG_ID", BT.TAG_NAME "TAG_NAME", BT.TAG_DESCRIP "TAG_DESCRIP", MT.TAG_DATE "TAG_DATE", MT.TAG_VALUE "TAG_VALUE"
FROM
BT_MAPPING BT, MT_ANALOGUE MT
WHERE
MT.TAG_ID=BT.TAG_ID
AND
MT.TAG_VALUE > 0.10
AND
(BT.TAG_NAME like 'BR_FL0%_NI'
OR BT.TAG_NAME like 'BR_FL1%_NI'
OR bt.tag_name = 'BR_FWL00_NI')
ORDER BY BT.TAG_NAME, MT.TAG_DATE;
this is a sample of what data the query returns
TAG_ID                 TAG_NAME                             TAG_DESCRIP                         TAG_DATE                  TAG_VALUE
40076                    BR_FL01_NI                            Filter #1 Turbidity                       2009-02-05:01:51          0.112088
40076                    BR_FL01_NI                            Filter #1 Turbidity                       2009-02-05:01:52          0.10696
40076                    BR_FL01_NI                            Filter #1 Turbidity                       2009-02-05:01:53          0.101343
40076                    BR_FL01_NI                            Filter #1 Turbidity                       2009-02-05:08:56          0.108181
40076                    BR_FL01_NI                            Filter #1 Turbidity                       2009-02-05:08:57          0.144567
40076                    BR_FL01_NI                            Filter #1 Turbidity                       2009-02-05:08:58          0.160684
40076                    BR_FL01_NI                            Filter #1 Turbidity                       2009-02-05:08:59          0.195116
40076                    BR_FL01_NI                            Filter #1 Turbidity                       2009-02-05:09:00          0.179976
40076                    BR_FL01_NI                            Filter #1 Turbidity                       2009-02-05:09:01          0.178266
40076                    BR_FL01_NI                            Filter #1 Turbidity                       2009-02-05:09:02          0.176557
40076                    BR_FL01_NI                            Filter #1 Turbidity                       2009-02-05:09:03          0.175336
40076                    BR_FL01_NI                            Filter #1 Turbidity                       2009-02-05:09:04          0.174359
40076                    BR_FL01_NI                            Filter #1 Turbidity                       2009-02-05:09:05          0.174359
40076                    BR_FL01_NI                            Filter #1 Turbidity                       2009-02-05:09:06          0.169475But I am wondering how to query the times that the value is > .10 with a time duration >= 15min and to have the time the tag_value was > 0.10 and the last time the value was > 0.10 with the duration in a new column?
Something like this
TAG_ID     TAG_NAME      TAG_DESCRIP        TAG_START_DATE_OVER      TAG_START_VALUE    TAG_END_DATE_OVER      TAG_END_VALUE      DURATION
40076       BR_FL01_NI      Filter #1 Turbidity     2009-02-05:08:56                     0.108181                      2009-02-05:09:06                 0.169475                     20minI have searched the forums, but didn't find anything that applied. It's possible that I was searching for the wrong phrase. If anyone can provide some help, it would be appreciated.
Cheers
Edited by: scada on Feb 24, 2009 10:21 AM

I will look into analytic functions and your sample code to see if I can get the results. I did forget the sample data, again. I have now included some sample data. so what i need to query is when tag_value is > 0.10 for greater than 15 minutes for tags with tag name like 'BR_FL0%_NI' OR like 'BR_FL1%_NI' OR tag_name = 'BR_FWL00_NI'. I also would need a column in that query to be the time duration that the tag_value was > 0.10.
thanks again for all the help
bt_mapping
CREATE TABLE BT_MAPPING
( "TAG_ID" NUMBER(6,0) NOT NULL ENABLE,
"TAG_NAME" VARCHAR2(30 BYTE) NOT NULL ENABLE,
"TAG_DESCRIP" VARCHAR2(100 BYTE),
"TAG_SRC1" VARCHAR2(30 BYTE),
"TAG_SRC2" VARCHAR2(30 BYTE),
"TAG_GRP_ID" NUMBER(4,0),
"TAG_TYPE" VARCHAR2(2 BYTE),
"TAG_DB" NUMBER(12,6),
"TAG_ZERO" NUMBER(12,6),
"TAG_SPAN" NUMBER(12,6),
"TAG_EU" VARCHAR2(10 BYTE),
"TAG_MIN" CHAR(1 BYTE),
"TAG_MAX" CHAR(1 BYTE),
"TAG_AVG" CHAR(1 BYTE),
"TAG_DCM" NUMBER(4,0),
"TAG_TYPE_ID" NUMBER(4,0)
Insert into bt_mapping
values (40652,'BR_FL10_NI','Filter #10 Turbidity','BRIPSS03','BRIPSS04',0,'AI',60,0,0,'0','1','1','1',3,2);MT_ANALOGUE TABLE
CREATE TABLE MT_ANALOGUE
( "TAG_ID" NUMBER(6,0) NOT NULL ENABLE,
"TAG_DATE" DATE NOT NULL ENABLE,
"TAG_VALUE" NUMBER(12,6),
"TAG_QUALITY" NUMBER(6,0),
"TAG_ADJUST_FLAG" CHAR(1 BYTE)
INSERT INTO MT_ANALOGUE VALUES
('40652',to_date('25-feb-2009 10:00','dd-mon-yyyy hh24:mi'),'.018816','0','0');
INSERT INTO MT_ANALOGUE VALUES
('40652',to_date('25-feb-2009 10:01','dd-mon-yyyy hh24:mi'),'.028816','0','0');
INSERT INTO MT_ANALOGUE VALUES
('40652',to_date('25-feb-2009 10:02','dd-mon-yyyy hh24:mi'),'.029548','0','0');
INSERT INTO MT_ANALOGUE VALUES
('40652',to_date('25-feb-2009 10:03','dd-mon-yyyy hh24:mi'),'.029304','0','0');
INSERT INTO MT_ANALOGUE VALUES
('40652',to_date('25-feb-2009 10:04','dd-mon-yyyy hh24:mi'),'.028816','0','0');
INSERT INTO MT_ANALOGUE VALUES
('40652',to_date('25-feb-2009 10:05','dd-mon-yyyy hh24:mi'),'.028571','0','0');
INSERT INTO MT_ANALOGUE VALUES
('40652',to_date('25-feb-2009 10:06','dd-mon-yyyy hh24:mi'),'.029548','0','0');
INSERT INTO MT_ANALOGUE VALUES
('40652',to_date('25-feb-2009 10:07','dd-mon-yyyy hh24:mi'),'.029304','0','0');
INSERT INTO MT_ANALOGUE VALUES
('40652',to_date('25-feb-2009 10:08','dd-mon-yyyy hh24:mi'),'.028816','0','0');
INSERT INTO MT_ANALOGUE VALUES
('40652',to_date('25-feb-2009 10:09','dd-mon-yyyy hh24:mi'),'.028816','0','0');
INSERT INTO MT_ANALOGUE VALUES
('40652',to_date('25-feb-2009 10:10','dd-mon-yyyy hh24:mi'),'.030037','0','0');
INSERT INTO MT_ANALOGUE VALUES
('40652',to_date('25-feb-2009 10:11','dd-mon-yyyy hh24:mi'),'.028327','0','0');
INSERT INTO MT_ANALOGUE VALUES
('40652',to_date('25-feb-2009 10:12','dd-mon-yyyy hh24:mi'),'.029792','0','0');
INSERT INTO MT_ANALOGUE VALUES
('40652',to_date('25-feb-2009 10:13','dd-mon-yyyy hh24:mi'),'.028327','0','0');
INSERT INTO MT_ANALOGUE VALUES
('40652',to_date('25-feb-2009 10:14','dd-mon-yyyy hh24:mi'),'.029792','0','0');
INSERT INTO MT_ANALOGUE VALUES
('40652',to_date('25-feb-2009 10:15','dd-mon-yyyy hh24:mi'),'.029304','0','0');
INSERT INTO MT_ANALOGUE VALUES
('40652',to_date('25-feb-2009 10:16','dd-mon-yyyy hh24:mi'),'.028816','0','0');
INSERT INTO MT_ANALOGUE VALUES
('40652',to_date('25-feb-2009 10:17','dd-mon-yyyy hh24:mi'),'.028816','0','0');
INSERT INTO MT_ANALOGUE VALUES
('40652',to_date('25-feb-2009 10:18','dd-mon-yyyy hh24:mi'),'.029548','0','0');
INSERT INTO MT_ANALOGUE VALUES
('40652',to_date('25-feb-2009 10:19','dd-mon-yyyy hh24:mi'),'.028816','0','0');
INSERT INTO MT_ANALOGUE VALUES
('40652',to_date('25-feb-2009 10:20','dd-mon-yyyy hh24:mi'),'.029792','0','0');
INSERT INTO MT_ANALOGUE VALUES
('40652',to_date('25-feb-2009 10:21','dd-mon-yyyy hh24:mi'),'.029548','0','0');
INSERT INTO MT_ANALOGUE VALUES
('40652',to_date('25-feb-2009 10:22','dd-mon-yyyy hh24:mi'),'.029548','0','0');
INSERT INTO MT_ANALOGUE VALUES
('40652',to_date('25-feb-2009 10:23','dd-mon-yyyy hh24:mi'),'.029304','0','0');
INSERT INTO MT_ANALOGUE VALUES
('40652',to_date('25-feb-2009 10:24','dd-mon-yyyy hh24:mi'),'.028816','0','0');
INSERT INTO MT_ANALOGUE VALUES
('40652',to_date('25-feb-2009 10:25','dd-mon-yyyy hh24:mi'),'.028816','0','0');
INSERT INTO MT_ANALOGUE VALUES
('40652',to_date('25-feb-2009 10:26','dd-mon-yyyy hh24:mi'),'.029304','0','0');
INSERT INTO MT_ANALOGUE VALUES
('40652',to_date('25-feb-2009 10:27','dd-mon-yyyy hh24:mi'),'.028816','0','0');
INSERT INTO MT_ANALOGUE VALUES
('40652',to_date('25-feb-2009 10:28','dd-mon-yyyy hh24:mi'),'.028571','0','0');
INSERT INTO MT_ANALOGUE VALUES
('40652',to_date('25-feb-2009 10:29','dd-mon-yyyy hh24:mi'),'.029304','0','0');
INSERT INTO MT_ANALOGUE VALUES
('40652',to_date('25-feb-2009 10:30','dd-mon-yyyy hh24:mi'),'.029304','0','0');
INSERT INTO MT_ANALOGUE VALUES
'40652',to_date('25-feb-2009 10:31','dd-mon-yyyy hh24:mi'),'.017304','0','0');Edited by: scada on Feb 25, 2009 12:08 PM
Edited by: scada on Feb 25, 2009 1:21 PM
Edited by: scada on Feb 26, 2009 10:51 AM
Edited by: scada on Feb 26, 2009 10:58 AM

Problems since 2.2.1 (applemobilebackup.exe error, long sync time)

After installing 2.2.1, I am experiencing the following and wondering if anyone on this forum has a solution to the following two issues. Thanks in advance.
While syncing to my pc (it's a toshiba laptop running xp sp3), right before completing, there has been an applemobilebackup.exe error appearing that I click ok to and then it finishes sync'ing. I'v searched the net and it seems like I'm the only one experiencing this??
It seems to keep taking longer and longer to sync. I remember the status bar running faster than I can keep an eye on it. After installing a few games, it's at a crawl these days. I uninstalled the Facebook app and still runs at a crawl. Anybody have any ideas how to enable faster sync times?

Here is an article from the apple support website that might help out.
http://support.apple.com/kb/TS1401
http://support.apple.com/kb/TS1878

No of questions in sccm 2012 70-243 exam and the time duration

how many question in sccm 70-243 exam and time duration for the exam

Hi,
I can hardly remember but according to Daniel it was 3 hours and 60 questions.
http://www.danielclasson.com/passed-the-70-243-administering-and-deploying-system-center-2012-configuration-manager-exam/
Regards,
Jörgen
-- My System Center blog ccmexec.com -- Twitter
@ccmexec

Ad objects sync time

Hi,
what is the time of directory objects sync.
Is it 15 min default?
Example: multisite domain (10 DCs):
1. 5 users created on site 1
2 5 users created on site 2
3. they are added to a group on site 10
4. 5 computers from site 4 added as a group members of site 1
What is the sync time in the examples above?
Thanks.
--- When you hit a wrong note its the next note that makes it good or bad. --- Miles Davis

Hi,
what is the time of directory objects sync.
Replication of AD Objects between domain controllers in a site is "Instant". However intersite replication (I mean replication between sites) depends on your configuration. I configured mine to be 60 minutes because I needed it that way. The default
is 180 minutes however.
Mahdi Tehrani |
|
www.mahditehrani.ir
Please click on Propose As Answer or
to mark this post as
and helpful for other people.
This posting is provided AS-IS with no warranties, and confers no rights.
How to query members of 'Local Administrators' group in all computers?

Long Sync times...... Solved!!!

Over the past 2 months I have been moving my nearly 4TB iTunes Library from Win 7 64bit to my brand new Mac Mini with Lion. Like many, I made the assumption that because iTunes was an Apple product it would run at its best on an Apple product. So far, the jury is still out on this one.
During the process of moving I discovered 2 bugs with iTunes. The first one was to do with consolidating an iTunes Library in an area greater than 4TB (I have reported this using the usual channels). The second one isn't quite so "rare" and may benefit others which is why I decided to open this thread.
In my house there are 3 Apple TV's (Gen 1), 2 iPod Touch's, 1 iPad and 4 iTunes users (with corresponding libraries of various sizes). In the center is what we laughlingly call our iTunes Server which now resides on a Mac Mini (2.7GHz 4G). It took many attempts to move our primary library from Windows to Mac (I will try to document all the problems on another occasion) but when I eventually got it working I noticed that sync times on any device attached to the Mac Mini library would take a minimum of 20 minutes no matter how small the sync should have been. In all cases the first 15 to 20 minutes consisted of the Mac Mini running at around 100% CPU without actually achieving much and then suddenly the CPU would reduce down to lower levels and the sync would complete as normal. Initially I thought iTunes was in a loop but eventually decided to let it run just to see what would happen....and sure enough it eventually completed normally.
Rather than go through all the different things that I tried to sort this out I will simply point out what I think is a bug in the Mac version of the product (it works OK in the Windows version). We have a family photo library with over 80000 photos in it. When syncing any device with photos from this library I used to select the root directory of the library and then simply select "selected folders" within that library inside the iTunes Photos Tab. This method had worked ok for us for at least 3 years in the old Windows environment. In the Mac environment however iTunes appears to need to cycle through the whole photo library EVERY TIME before it starts to actually sync. If instead I simply picked one folder with say 2000 photos in it, it would start syncing instantly without any delay. I can happily reproduce this problem whenever I want to.
So if you have long sync times ONE option is to check how you are accessing your photo library.

I'm experiencing this problem too. It goes through syncing Contacts, Calendars, etc. and then it say Syncing iPhone and hangs. CPU usage for iTunes goes from 7-10 to 103 and stays pegged. I have discovered that if I go to the "Advanced" section of the "Info" tab in iTunes and select "Replace information on this iPhone" that it will sync successfully, but only for that sync and the next sync will again hang. This trick seems to work whether I select all the "replace" options (Contacts, Calendars, Bookmarks, Notes, and Mail Accounts) or just one (I tried with just Notes selected).
I haven't tried the Restore option yet.

Why is the Last synced time: 1/1/1601 12:00:00 AM

I'm doing a cutover migration from Exchange 2003. When I check the migration batch statistics, the "Last synced time" is always 1/1/1601 12:00:00 AM
I can't determine what this means, or why it is like that. I want to ensure that the last sync is completed before deleting the migration batch.
Any ideas?
Aain Ramcharan Technology Alliance Inc.

I didn't let it stop my migration, though, as syncing is supposed to happen every 24 hours.
The best thing for me, whenever there was an error, was to Stop, Wait 10 minutes, and Start the migration, again.
Good luck.

Can I change the time/duration in a batch way instead of one by one?

I am using Premiere Pro CS3 and I would like to have 7 seconds per photo and not the default of 5 seconds. I know you can do each photo separately, by would love a batch performance. Thanks, Michele

Thank you so much for your reply. I really did not try your approach because I had the question posted on another thread, and was given the following reply and it worked; therefore, just for your information - here it is:
Huntrex
98 posts since
Aug 4, 2009
1. Jul 5, 2010 9:15 PM in response to: photomom17
Re: How do I change the time/duration of all clips from the default 5 seconds?
Go to: Edit -> Preferences -> General. Then customize the "Still Image Default Duration". To get seven seconds per image, enter 210 frames if the project is 29.97fps or 168 frames if it is 24fps.
In the future you can post to this forum, for older versions of Premiere.
It worked great!

Sync time duration

Similar Messages

Maybe you are looking for