Synchronous Fault Message

Can anybody tell abt Synchronous Fault messaging.......
How mapping is done between them.
Thanks
Jai

Hi,
Check the Threads Treatement of Fault Messages in Synchronous Scenarios?!
Re: Synchronous & Fault
Thanks!

Similar Messages

Synchronous File- Soap scenario with fault message

Hi!
I have a File to Soap synchronous scenario.
All is right when no exception is returned by the web service.
I want to use fault messages to catch thoses exceptions, so I have added fault message in message interfaces and in the mapping program in the interface mapping.
Now, when the web service return an exception like :
<soap-env:Envelope xmlns:soap-env="http://schemas.xmlsoap.org/soap/envelope/">
   <soap-env:Body>
      <soap-env:Fault>
         <faultcode>soap-env:Client</faultcode>
         <faultstring xml:lang="en">NOT_CREATED</faultstring>
         <detail>
            <n0:Z_WS_CREATE_WAGON.Exception xmlns:n0="urn:sap-com:document:sap:rfc:functions">
               <Name>NOT_CREATED</Name>
               <Text> does not have packaging material type and is therefore not a pack.mat.</Text>
               <Message>
                  <ID>HUSELECT</ID>
                  <Number>041</Number>
               </Message>
            </n0:Z_WS_CREATE_WAGON.Exception>
         </detail>
      </soap-env:Fault>
   </soap-env:Body>
</soap-env:Envelope>
I get the following error :
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
   <SAP:Category>XIServer</SAP:Category>
   <SAP:Code area="MAPPING">NO_MAPPINGPROGRAM_FOUND</SAP:Code>
   <SAP:P1>http://www.arcelormittal.com/radis/rad IM_RAD_to_ZWsCreateWagon</SAP:P1>
   <SAP:P2 />
   <SAP:P3 />
   <SAP:P4 />
   <SAP:AdditionalText />
   <SAP:ApplicationFaultMessage namespace="" />
   <SAP:Stack>Interface mapping http://www.arcelormittal.com/radis/rad IM_RAD_to_ZWsCreateWagon does not exist in runtime cache</SAP:Stack>
   <SAP:Retry>N</SAP:Retry>
</SAP:Error>
My mapping program for fault message is well defined (I tested it with the exception message received from the web service).
I have also refresh caches, but without success...
Can anyone help me ?
Thanks in advance,
Laurence

Hey Laurence,
A File adapter is aysnchronous u cant use for synchrous because it cant acknwlodge the response it gets or itt sends.
regarding two asynchoronus
1. file to SOAP asychn.
2. triggger the second one if SOAP has exception then pass the error from SOAP to New File.
using BPM we have to use Transportion level acknowledgments
please reward points if it helps
Regards
Sreeram.G.Reddy

Fault message in synchronous send step in BPM

Hi,
When executing a synchronous send step in BPM it is possible to handle application errors (fault messages) with an exception branch. But how do you get hold of the actual data in the Fault message(faultText, faultURL, faultDetail etc) for further processing (mapping)?
Kind regards Johan

Johan,
u have to define another container element in integration process.
For that container element an Async Abstract interface has to created with falult message as the message.
Do u have the fault message defined already...
Also go through this thread.
Fault message handling in BPM
-Naveen.

BPM synchronous send step - Fault message extraction

Hello Experts,
I am developing a BPM with Asynch RFC -> synch Webservice -> Asynch RFC scenario.
I have defined fault message in the synchronous interface used in the send step for web service, and also defined
exception branch where an alert is thrown.
In the alert, i want to send the fault text from the fault message. How can i do that??
Thanks

Hi Mona,
SOAP adapter doesnt support fault messages.
check stephan's reply @ How catch the SOAP Fault Message ?
> SOAP adapter does not support fault message.
> Any fault is treated as error.
> fault messages are only supported for XI messages (ABAP or Java proxies) and RFCs.
Fault message handling is not possible inside BPM.

Error handling using fault message type in outbound synchronous ABAP proxy

Hi,
We've a scenario, outbound synchronous ABAP proxy to synchronous SOAP receiver. The requirement is to send multiple records in a single rquest and get response for all the records sent (in the same response message).
Say if I send 10 records from ECC, I should get 10 records as response from SOAP to ECC. But the problem here is, there could be some invalid requests, for which an invalid error status code should be sent as part of response.
Source Structure
Req_Proxy
    req (0..unbounded, string)
Response Structure
Resp_SOAP
Resp (0..Unbounded)
       respString (0..1, String) (carries the actaul response message)
      status code (0..1, String) (carries the status of the response, for ex, 001 (successful), 002 (error))
And now we are planning to make use of Fault Message Type, to track the errors from SOAP (status code 002). But, we are not sure on how to track this for all the requested records. Is it possible to track the errors for all the requested records in a singe call using fault message type? For eg if 8 records are successful and 2 are invalid, then we should get 10 records in response 8 for valid and 2 for invalid accordingly.
Please calrify.
Thanks.
Rohit

For eg if 8 records are successful and 2 are invalid, then we should get 10 records in response 8
for valid and 2 for invalid accordingly.
Check if you can modify the WSDL structure to include an error node that would get populated incase of invalid entries....this would mean that you get the success and failure details in the single message....also at the proxy-end make the necessary change in your DT.....may be then you do not need to use the fault message...
Regards,
Abhishek.

Treatement of Fault Messages in Synchronous Scenarios?!

Hi all,
I got a question concerning the use of fault messages in
synchronous scenarios...
1. When I define a fault message for my synchronous
   receiver interface, a fault message, coming back
   would not be handled by my sync. Interface- and
   Messagemapping, right?
   So how can I give the fault messageinformation back to
   the sender?
2. Will I have to define a second scenario for handling
   the fault message?
   (Meaning new Communication Channel, MI, IM, MM and so
   on)
   Thanks for help, anwers are quickly rewarded...
   Daniel

> 1. When I define a fault message for my synchronous
>
>    receiver interface, a fault message, coming back
>    would not be handled by my sync. Interface- and
>    Messagemapping, right?
> So how can I give the fault messageinformation
> ion back to
>    the sender?
The fault message has to be handled in your BPM using an exception branch. You can create an exception branch in a block and assign it to be the handler for a particular exception(fault message).
How can we handle Exception Branch in BPM effectively
> 2. Will I have to define a second scenario for
> handling
>    the fault message?
> (Meaning new Communication Channel, MI, IM, MM and
> and so
>    on)
It depends on what you want to do with your fault message. If you want to throw an alert, that could trigger emails, you can do it by configuring alerts and using a control step in your exception branch to throw alerts. Only if you want to do something else like log a message into a database, you will need separate jdbc communication channel, MI etc.
Regards,
Suresh

Usage of fault message in a synchronous web service call from PI ccBPM

In a PI ccBPM call to synchronous web service, how can I use the fault message created and attached to the synchronous interface call.
Mike

I see nowhere so far, that says not possible. Can you direct me to the appropriate help. Client asking for the same, i have been trying to get this done for a while, can't given an answer NO unless i show them the legit document or something.
I am in the processing of getting sap help and i have an open ticket. Support never mentioned so far about no possibility to get this done either. I am still crossing my fingers. But will update this thread accordingly with either of the solutions

Fault message in synchronous scenario

I defined an integreationprocess with synchronous send step and an exception branch.
And I specified an exception for a fault message which I defined in the synchronous interface.
My problem is, that the exception is not triggered by application errors. The integrationprocess is canceled, although I defined an alternative way in exception branch. I can´t figure why exception isn´t triggered, but I have an assumption.
This is the inbound fault message from receiver:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
<fault:AuthException xmlns:fault="urn:vwservices">
<fault:messageText>Session Token expired or not valid</fault:messageText>
</fault:AuthException>
But in interface mapping, when I execute a test run for fault message, the message looks like:
<?xml version="1.0" encoding="UTF-8"?>
<ns0:AuthException xmlns:ns0="urn:vwservices">
<ns0:messageText/>
</ns0:AuthException>
The xml messages are different because of namespace. Is it the problem, why the exception isn´t triggered?
For this scenario I use a WSDL File from receiver system, which means that, I did not create the fault message myself.
Thanks for your help!

Yes, I have assigned the same name.
I made a test with the system error.
Before testing I assigned my exception handler (the same as for application errors) in the send step under item "System Error".
Then I manipulated my message mapping, so that an system error will be created.
This szenario works fine. After system error the exception branch was executed.
I´m truly desperate, because the Application Error don´t work.

Configuring Fault Message For the Send Synchronous step

Hi,
PI receives a file and sends a soap request to Third pary system. If the data sent to third party system is correct, PI receives a empty soap envelopre. If the data is not approriate, PI receives an fault message(Application Error).PI has to trigger an email in either case.
I have configured a send synchronous step to initiate Request/Response with a validation fault, followed with send step for triggering an email.once the interface is executed, The process is not moving further from Send synchronous step.In short the steps after send synchronous are not being executed.
Regards,
Kiran.

Hi,
I have created exception branch if PI receives a validation fault. PI will trigger success email, if the PI receives blank response from third system.PI will trigger failure email, if PI receives a fault message.
Regards,
Kiran.

Synchronous SOAP: Get fault message on ABAP side

Hi,
I've a synchronous ABAP Proxy => PI 7.11 => SOAP scenario.
The SOAP receiver is a third party application using AXIS 1.4.
When I call the SOAP receiver with bad input via SOAP UI I receive an error message like that:
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
   <soapenv:Body>
      <soapenv:Fault>
         <faultcode>soapenv:Server.userException</faultcode>
         <faultstring>com.ZZZ.exception.ZZZException: Employee not found: 9999911111</faultstring>
         <detail>
            <com.ZZZ.exception.ZZZException xsi:type="ns1:ZZZException" xmlns:ns1="http://exception.ZZZ.com"/>
            <ns2:hostname xmlns:ns2="http://xml.apache.org/axis/">server.YYY.com</ns2:hostname>
         </detail>
      </soapenv:Fault>
   </soapenv:Body>
</soapenv:Envelope>
When I call the SOAP receiver through my ABAP proxy, I just get this exception message in SXI_MONI:
<?xml version="1.0" encoding="UTF-8"?>
<com.ZZZ.exception.ZZZException xmlns:ns1="http://exception.ZZZ.com"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:type="ns1:ZZZException"/>
Nevertheless I see the error in SXI_MONI:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>

<SAP:Error SOAP:mustUnderstand="1" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
    <SAP:Category>Application</SAP:Category>
    <SAP:Code area="SOAP">FAULT</SAP:Code>
    <SAP:P1>http://schemas.xmlsoap.org/soap/envelope/</SAP:P1>
    <SAP:P2>Server.userException</SAP:P2>
    <SAP:P3/>
    <SAP:P4/>
    <SAP:AdditionalText>com.ZZZ.exception.ZZZException: Employee not found: 9999911111</SAP:AdditionalText>
    <SAP:ApplicationFaultMessage namespace="">com.ZZZ.exception.ZZZException</SAP:ApplicationFaultMessage>
    <SAP:Stack/>
    <SAP:Retry>M</SAP:Retry>
</SAP:Error>
In the WSDL of the SOAP receiver there's just the ZZZException without fields faultcode or faultstring:
<complexType name="ZZZException">
<sequence/>
</complexType>
Do I have to add the fields faultcode or faultstring to the WSDL myself?
I tried the following, but it didn't work:
<complexType name="ZZZException" abstract="true">
    <xsd:sequence>
        <xsd:element name="faultstring" type="soapenc:string">
    </xsd:sequence>
</complexType>
Thanks in advance!

Hi Eddie -
Do I have to add the fields faultcode or faultstring to the WSDL by myself?
>>> No. Even though you add - it doesn't work as it's the webservice which returns the message.
For sending the fault messages, Have a look at the below blog -
Handling Web Service SOAP Fault Responses in SAP NetWeaver XI

Are fault messages applicable to synchronous messages also?

Hi Experts,
I have been trying to understand FAULT messages in XI.
The blogs I have seen so far discuss FAULT messages in Asynchronous scenarios only.
This makes we wonder if it cannot be used for Synchronous RFC scenarios.
Can somebody confirm this?
Thanks
Gopal

Fault messages can be used for Synchronous scenarios also.
To do a self-check create a Synchronous Message/ Service Interface....you will observe that the Fault message type section gets enabled.
For reference: http://www.sdn.sap.com/irj/scn/weblogs;jsessionid=(J2EE3414700)ID1964483350DB02509562514351735296End?blog=/pub/wlg/2759
Regards,
Abhishek.

BPM: System_Error" SOAP fault message received

Hi,
We upgraded SAP system from 4.7 to ERP2004 on 09/17/05.
We have XI-3.0 version from last 9 months and this BPM was working good so far. We have not changed anything in it except we upgraded the SAP system.
We are using ABAP proxy from SAP to send "userid"
message to XI-BPM and then it would make a Synchonous call to SAP system to get roles of those "usrid".
In the first step when it is sending data to XI an exception is raised and in the second step when it tries to make synchronous call to SAP we are getting error:
<Trace level="3" type="T">Deserializing message object...</Trace>
<Trace level="3" type="System_Error">SOAP fault message received</Trac
<Trace level="3" type="System_Error">SOAP fault code: Client</Trace>
<Trace level="3" type="System_Error">SOAP fault string: Error during c
I noticed that the XML name tag looks different now
Before upgrade when message was successful.
<?xml version="1.0" encoding="utf-8" ?>
- <ns1:MT_ECA_USRID xmlns:ns1="http://bcm.edu/common"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<USRID>CLARKSON</USRID>
<USRID>2_MA140016</USRID>
</ns1:MT_ECA_USRID>
After upgrade when message is failed
<?xml version="1.0" encoding="utf-8" ?>
- <nr1:MT_ECA_USRID xmlns:nr1="http://bcm.edu/common">
<USRID>AABULIMI</USRID>
<USRID>AB147899</USRID>
<USRID>ACHALL</USRID>
</nr1:MT_ECA_USRID>
You would notice that
" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
missing after upgrade.
I would appreciate if anyone could help me.
Mrudula

Hi,
Can you paste the full error message. Also take a look at the default trace log in Visual Admin. Set the logging for soap to debug.
Naveen

Handling SOAP Fault messages in BPM

Hi,
My scenario is Sync-Async Bridge involving File to SOAP transformation. I have used BPM as 1 file has many records and each record is required to call the web service synchronously.
In the BPM I have
Receive ---> Transform (1:n multimapping ) -
> Block (Par for Each)
In Block I have Send Sync step to call Web service . I have an exception branch for the send step for catching Fault message that is sent back from webservice for Application Fault.
Problem:
Though the Fault message is sent from web service ,in the BPM the block goes in error saying : "No exception defined for fault message ". The Exception brach is not executed.
Please suggest if anyone has come across such a scenario and solution to this.

hi satesh
using "exception handler" in BPM we can handle the error messages
regards
kummari

PI 7.0 SOAP message reply HTTP 500 and after the fault message

Hello Everybody,
I have the scenario RFC -> XI -> SOAP in synchronous mode.
I use for the mapping XSLT because I have to put some dynamic data comming from the RFC in the header of envelope.
At level of adapter receiver SOAP , I flag the "do not use envelop"
In normal, that works .
When the is an fonctionnal error in SOAP service, it sends me back an error HTTP 500 and afterwards the fault message in a soap envelop format. In that case, how can I pass over this error to treat the envelop because in adapter, it is stopped and it returns a short dump to the RFC.
Is there somebody who can help me with this problem ?
Thanks in adavance for your answers .
Regards.
Eric.

Hi,
In case of a SOAP error while processing the request, the SOAP HTTP server MUST issue an HTTP 500 "Internal Server Error" response and include a SOAP message in the response containing a SOAP Fault element
Thanks,
RamuV

Fault message handling in BPM

Hi again xi fighters
I created a business process with a synchronous sending step. I defined all interfaces and implemented also an own fault message type within the synchronous abstract interface. If the used RFC got the correct data the sync. sending step worked proper and also the business process worked fine. If I providing wrong data to the RFC to force him to throw an exception the Business process received the fault message. Then I just want to send the received fault message asynchronously to a file adapter within the defined exception branch. And now the question no-one answered in several discussion threads ;-<
How can I send the message? I am not able to implement a new variable in the container for the fault message type. Any advises here?????
Please help me, before I got inshane of SAP ;->>
Regards Oliver
Message was edited by: Oliver Bluhm
Hi everybody
any ideas, or is the question not clear. Please have a look and let me know you exlperience!
Regards Oliver

Hi Oliver,
how do you know, that is impossible to read the content of the fault message in the exception branch? Did someone from SAP say that? For days I read all the notes, blogs, help,.. and didn't find an answer.
It should work.
1. I have an integration process in XI sending a sync message to R3.
- OK
2. In the generated proxy class I raise an exception of the generated exception proxy class.
- OK
3. The exception message is shown in the message monitoring, containing also all our customer-data.
- OK
4. The integration process in XI activates the correct exception branch.
- OK
Missing: How do I get a grip on the data in the error message?
Kind regards Philipp
Message was edited by:
        Philipp Jakob

Synchronous Fault Message

Similar Messages

Maybe you are looking for