Synchronous provisioning or increase timeout
Hi,
I have been doing provisioning to target environment from a long time now, through invoking web services of targeted system. But recently, targeted environment has started being slow in sending response back to OIM. Because of that, OIM invoke provision process, but when don’t hear back from target, it assumes that provision failed and so shows Rejected status for provisioning (while provisioning is happening, but with little delay). Our requirement is either to do synchronous provisioning (meaning if target is not responding, just keep waiting for response), or increase the timeout before OIM assume that it will not get response back. I have looked into all System Configuration properties, but couldn't find anything to achieve this scenario. Do any of you know and help in this matter.
Thanks,
Ashish
You could see them remotely, or by flicking the switch in one of those apps, but anyway, have you tried public key authentication?
IMHO this is a stronger argument for using public key authentication rather than password.
http://discussions.apple.com/thread.jspa?threadID=840267
However, in my opinion, this is the wrong approach entirely. Switch to using public keys and avoid the need to use passwords at all. Another Google shows numerous tutorials, including this one.
http://discussions.apple.com/thread.jspa?threadID=2296454&tstart=438
Also...
http://www.askdavetaylor.com/automatingssh_with_a_shellscript.html
Similar Messages
-
Synchronous HTTP - RFC Scenario: Timeout
Hello together,
I have just implemented a synchronous HTTP --> RFC scenario. When I test the implementation using the HTTP testing tool within the Runtime Workbench everything works fine.
However when I use an external HTTP Client I get a timeout exception. This is also raised in the XI Message Monitoring: "Timeout condition of pipeline reached"
Do you know any reason for this?
Thank you very much.Hello,
this problem is solved now. It was a problem with the HTTP Client, obviously because a wrong queueID was automatically inserted in the URL. -
Increase timeout for bpm workspace
Please, tell me where can i increase session timeout for bpm workspace (Oracle SOA Suite 11.1.1.4)?
Thanks.Hello Creed -
Go to the workspace.properties file and edit the following.This is from 10.3.2.
Hopefully you can found the same in 11 also.
+# Specifies the timeout period in seconds, between client requests.+
+# If not specified the default value is 45 minutes.+
+#fuego.workspace.sessionTimeOut=2700+
BR,
Justin. -
Increase timeout value for webservice
Hello,
I have a stateless session bean webservice that times out when running long queries.
Caught exception while handling request: oracle.oc4j.rmi.OracleRemoteException: An exception occurred during transaction completion: ; nested exception is:
javax.transaction.RollbackException: Timed out
How can I increase the timeout value for this webservice?
Thanks!at the oc4j directory you can find in j2ee\home\config the file transaction-manager.xml where you can change the value of transaction-timeout
cumps
DnlCY -
How to increase timeouts for Async messages? Which parameter ti increase?
Hi guys,
can you please provide a parameter name which needs to be increased so long taking message processing of asynchronous scenarios which contain lots of data would not fail because of the timeout?
Thank you for your help, AndrzejHello,
you can modify the time out parameter. refer sap note 856597
Regards
Monica -
Increasing timeout session of Debugger...
Where can you increase the time for the debugger, right now it's set to 60s and it doesn't give me enought time to debug the ABAP code for the screens before it timesouts.
500 Connection timed out
Error: -5
Version: 7000
Component: ICM
Date/Time: Tue Dec 02 14:30:37 2008
Module: icxxthr.c
Line: 2698
Server: sapdispatcher__50
Error Tag: {-}
Detail: Connection to partner timed out after 60s
© 2001-2005, SAP AG
This is what's on the browser's screen, not sure about the other trace. -
Question for David; was: PHP process too slow, can I increase timeout?
You wrote:
> You can follow the action in PHP. Just add an echo
command at the end of
> the loop to display the name of the image that has been
processed.
At the time I commented that this did not work for me, but I
thought it was
because I was doing all my processing before I opened a page.
However when I
thought about it I realised that I had in fact opened a page
before I started
processing the files.
I have just checked it again, and I open the new page, write
a heading, then
start copying files, echoing the name of each file as it is
copied.
But the result is the same. The heading appears, then there
is a long pause,
then all the diagnostics spit out, followed by a 'Fatal
error: maximum execution
time exceeded' diagnostic.
Can I get the diagnostics to appear as they are written, or
do they always wait
until the php processing is completed?
Clancyyou can use this debug function ... it writes debug statement
to a log file
(debug.log) in the same folder as teh script being run. It
assumes that PHP
has permission to create a file on your server - but it
should. This should
run as the script is processing
Alex
function debug_log(){
// DESCRIPTION: prints variable names and their values in a
readable
format within a log file
// INPUTS: any variables of any type, include string name;
// ex. debug("var1",$var1,"var6",$var6,...)
global $debug_file;
if(is_null($debug_file)){ $debug_file = "debug.log"; }
$msg = "";
$tab = " ";
$arg_list = func_get_args();
if(empty($arg_list))
return(false);
$count = func_num_args();
for($i = 0; $i < $count; $i+=2){
$j = $i+1;
$msg .=
_debug_format($arg_list[$i],$arg_list[$j])."\n".$tab;
$file = fopen($debug_file,"a");
if($file){
fwrite($file, date('Y-m-d H:i:s')." |
".$_SERVER['SCRIPT_NAME'].":\n".$tab.$msg."\n");
fclose($file);
return true;
}else{
return false; -
Php process too slow; can I increase timeout?
I am working on a php program to preprocess images. I want to
handle landscape
and portrait format images differently, and have written a
test program to copy
the original files to two different directories according to
their format. The
program is working correctly, but after it has copied about
180 of the 200 files
in the directory I am trying it on it exceeds the maximum
permitted execution
time of 30 seconds and times out.
Can I do anything to extend the limit?
ClancyClancy <[email protected]> wrote:
> I am working on a php program to preprocess images. I
want to handle
> landscape and portrait format images differently, and
have written a
> test program to copy the original files to two different
directories
> according to their format. The program is working
correctly, but
> after it has copied about 180 of the 200 files in the
directory I am
> trying it on it exceeds the maximum permitted execution
time of 30
> seconds and times out.
>
> Can I do anything to extend the limit?
You can either reset the limit in your php.ini (if you have
access...),
or rewrite the function so that it gets called recursively.
That would start the execution-time timer again for every
function call.
Freundliche Grüße,
Franz Marksteiner -
Hi All,
I need help from you in increasing timeout in Oracle Portals pages. I am trying to increase page time out from default 300 secs (5 mins) to some more extra time.
1. I modified httpd.conf file which is available in location: ../oracle/product/10gmidtierR2/Apache/Apache/conf/httpd.conf and restarted the http server, but timeout time was not increased.
2. I modified
Farm > Application Server: 10gmidtierR2.devsite.com > HTTP_Server > Field
Under "Client Request Handling" section i increased "Request Timeout (seconds)" fields. But timeout time was not increased.
Please tell me what i need to do to increse timeout of a page in Oracle Portals.Did you perform your first step using AS Control Console?
Did you restart the webserver after it?
if not then plz do so and update with results!
Edited by: AMN on Jun 23, 2009 1:48 PM -
TimeOut Exceeded in SMQ2- queue Block
Hi all,
I am having an issue with my production PI BOX. Not sure if there is any solution for this.
I have some interfaces in PI which expects huge payload data.Sometime the messages are getting failed in SMQ2 with error message " Time Limit Exceeded ". This is not happening with one particular interface message.Sometime teh queue got blocked for one interface and then the other day with some other interface.
When i tried to resend the same messages by selecting Execute LUW option, all of them have gone through fine. But we cannot do this manually everyday. I just wants to know where exactly the time out parameter has been maintained for pipeline processing.
The messages are getting timed out in receiver grouping pipeline step.
I have gone through the = Michal Blog : 3802 about the time out. But nothing helpful on that.
Could anyone of you help me out here?Hi
We are using JDBC communication channels for all these interfaces. But messages are failing in SXMB_MONI .ideally it means that messages are still in Integration engine. right?
It doesn't send teh message to adapter engine
If we increase timeout level at adapter level, does it really help? If yes how come? Could you please explian?
Thanks
Rajesh -
How to fail messsages when timeout exception is thrown in BPM?
Hi
In my BPM, if the time out exception is thrown in BPM, in SXMB_MONI, all the inbound messages' staus is 'processed sucessfully' ? How can I make the message fail? With a red flag or anything indicating exception?
In my design I used deadline branch to throw time out exception.And in the exception branch I used control step to cancel the process.Hi,
In my design I used deadline branch to throw time out exception.And in the exception branch I used control step to cancel the process
If this is what you have designed then increasing the timeout using the above mentioned blogs doesn't seem to be logical:) (BPM will throw the error when the deadline is meet....can't understand how by increasing timeout will help you)....instead of increasing the timeout you can increase the time limit mentioned in the deadline branch itself to ensure that your message will be processed in that particular time limit.
Since you have reached the timeout it means that desired message processing has failed so better you raise an alert instead of going for a increase in timeout....increasing timeout decreases performance...
Regards,
Abhishek. -
Hi All,
We are using the Webservice to Proxy scenario. Some time we got the time out error cause of response time exceed.
My question is,
1.What may the time limit of Sync. Calls?
Regards,
Prakasu.MHi,
First of all thanks for all your early replays....
"TIME LIMIT EXCEEDED" QRFC Problem is indicates that when we processing large volume of messages to external or internal systems in this case specified time limit in SM59 is not enough to process the message so that please increase TIMEOUTS...TIME LIMIT EXCEEDED error will be solved.
With Regards,
MFH -
Webi Timeout (Launchpad or Rich Client)
Dear experts,
I am not being able to increase timeout. I am on SBOP 4.0 SP8.1.
I followed all the guidelines from
http://help.sap.com/businessobject/product_guides/boexir4/en/xi4sp8_aa_admin_en.pdf
and
http://vynesolutions.wordpress.com/2013/04/19/configuring-business-objects-4-0-session-timeout-settings/
restarted BO servers / Tomcat.
Nothing changed. It still gives me a 20 minutes timeout instead of hte desired 45 minutes.
Thanks in advance for your help,
Kind regards,
André OliveiraHi Kishore,
Infoview does not support any local data source for creating the report. Also refresh from personal local data providers is currently supported with WebI Rich Client and Desk-I.
You need to create an universe on the spread sheet for getting the report to refresh in the infoview.
Also if you search, you will find a lot of threads are running on the same topic.
Regards,
Rohit -
XControl frontpanel freezes when timeout 0
Hi
I have an XControl with a big event handler (about 20 events currently). When I run this XControl for debugging ("Run Continuously"), its frontpanel freezes after only a few clicks, sometimes even directly after start. When I set timeout in the event handler to a value greater than a few milliseconds, it works.
The event handler is built as described here: http://www.ni.com/white-paper/3198/en/
- Why does it crash when timeout is 0? Is this a normal behavior because the handler might take a few milliseconds to finish?
- Is it a good fix to just increase timeout to some 100 milliseconds or will I likely run into new problems?
Best regards,
MichaelHi,
Can you tell me what is your version of labview and your OS.
Can you post your VI ?
Alexandre -
I developed an application in Jdev9i Rel.2(W2K) and tried to deploy WAR file on Oracle9iAS Rel.2 (Linux). I am getting the error
"Failed to deploy the application. Failed to save changes to one or more instances..instance1.......... Message: The send operation has been waited too long and reached the specified timeout value in the debug log, increase timeout or check opmn connection"
But my files were copied to applications directory, not to default-web-apps, so how to access it from Browser?
After this, now my OC4J_home is down, when I try to start it, it gives oracle.sysman.emSDK.util.jdk.EMException. I restarted the server also.
My Internet Directory is working. Is it related to memory problem? The OC4J_Portal which was working is also not starting up now.Reeya -- In general, deployment / EM problems associated with 9iAS will probably get better responses on the General iAS forum at:
http://forums.oracle.com/forums/forum.jsp?id=466592
You might want to post your query there.
Thanks -- Jeff
Maybe you are looking for
-
ISE 1.2 Standalone Mode
Hi Experts, Good day! I just want to clarify if I can provide posture assessment in ISE 1.2 even if it is in standalone mode because some said I can but based on my understandings of ISE since 1.1.4, I need to convert it first to an IPN mode for it t
-
Delete WorkBook and Query file from Server .
Dear All Experts . I dun know i posted in correct places or not .. (correct me if i m wrong) .. i want to ask about the BW Workbook and query. How we going to remove the remove the workbook or query files from Server ? bc i tried to delete from Analy
-
Google map embeding problem for Indesign CC
Hi All, I am having problem with embeding map to a indesign CC page. - In Object menu I select "Insert HTML.." - Edit HTML box appears, I paste the code into the box. * text box appears says "This is an HTML Snippet" - I select map code 122.797798089
-
Good day gurus, I got a problem, I made a program with a smartform, and it shows Ok in the portal. When I show the smartform at first time itu2019s ok, but when I select information, the smartform is the same, I mean the smartform doesnu2019t take th
-
Production Order not printing with Parallel Sequence ?
Hi All, User is unable to print Prod. Orders when Parallel Sequence is used, but Orders using Standard Sequence are printing fine. Print is done in Update Task, so User is able to release the Order and when he saves the Order, the Order should get pr