/SYS have no data.

Hi all,
I had a problem with folder /SYS in ILOM when I upgrade firmware for Netra T5220 from TFTP. In folder /SYS have no data such as:
-> ls
/SYS
Targets:
Properties:
Commands:
cd
reset
set
show
start
stop
My firmware version is 7.1.6, and I want to upgrade to 7.2.7_e
Please help me with this situation.
Thanks

There is no sense in blocking or revoking privileges from the SYSTEM user, this user is an administrator that must remain this way. If you are concerned about security issues, then just change the system password and don't share it, but don't revoke privileges from your administrator, it is as useless as trying to revoke privileges from the SYS user, any one who gains access to your host can quite easily gain access as SYS and have not only the possibility to read the table contents, but also export the full database and carefully read the database contents from the backup elsewhere.
Check with Meta4 if this has some data encryption features, to protect sensitive data., or check if you can use transparent data encryption in this context (you are rquired to work on a 10gR2 database).
~ Madrid

Similar Messages

  • Vdbench 5.04 slave host reports have no data

    I am running VDBench 5.04 in a master/slave environment. I have one slave running windows 2008 R2, and 1-6 slaves running Windows 2008 R2. When I run a job to more than one host the job runs and completes with no errors, but the hosts reports have no data. They say host summary, have a link to the histogram, have a link to the slave summary report, a link to the run definition report and then states the job end time, starting RD info; I/O rate; etc, but the detailed interval data is not there for any except sometimes one for the slave hosts. It is not always the same one with data. The Summary.html file has a summary, I am guessing for all the slaves averaged? How do I get the interval data for all the slaves. I will need this detailed data for my reporting.
    Any help would be VERY much appreciated.
    DW

    Thanks for your help. Here is the content of the files you requested.
    DW
    parmfile.html
    * Contents of parameter file: C:\vdbench\example5-multi.txt
    * Copyright (c) 2000, 2012, Oracle and/or its affiliates. All rights reserved.
    * Author: Henk Vandenbergh.
    * Example 5: Simple multi-host parameter file.
    * This test does a three second 4k read test from two hosts against the same file.
    * The 'vdbench=' parameter is only needed when Vdbench resides in a different directory on the remote system.
    hd=default,vdbench=C:\vdbench,user=user
    hd=one,system=192.203.3.1,shell=vdbench
    hd=two,system=192.203.3.2,shell=vdbench
    hd=three,system=192.203.4.1,shell=vdbench
    hd=four,system=192.203.4.2,shell=vdbench
    hd=five,system=192.203.5.1,shell=vdbench
    hd=six,system=192.203.5.2,shell=vdbench
    hd=seven,system=192.203.9.1,shell=vdbench
    hd=eight,system=192.203.9.2,shell=vdbench
    hd=nine,system=192.203.10.1,shell=vdbench
    hd=ten,system=192.203.10.2,shell=vdbench
    hd=eleven,system=192.203.11.1,shell=vdbench
    hd=twelve,system=192.203.11.2,shell=vdbench
    sd=sd1,host=*,lun=\\.\PhysicalDrive1,threads=1
    wd=wd1,sd=sd1,xfersize=8192,rdpct=75,seekpct=100
    rd=run1,wd=wd1,iorate=25,elapsed=300,interval=60
    *rd=rd1,wd=wd1,el=3,in=1,io=10
    logfile.html
    13:19:06.819 Vdbench distribution: vdbench50402
    13:19:06.819
    13:19:06.819 input argument scanned: '-fexample5-multi.txt'
    13:19:06.835 input argument scanned: '-o./testout'
    13:19:06.835 java.vendor Oracle Corporation
    13:19:06.835 java.home C:\Program Files (x86)\Java\jre7
    13:19:06.835 java.vm.specification.version 1.7
    13:19:06.835 java.vm.version 24.60-b09
    13:19:06.835 java.vm.vendor Oracle Corporation
    13:19:06.835 java.specification.version 1.7
    13:19:06.835 java.class.version 51.0
    13:19:06.835 user.name Administrator
    13:19:06.835 user.dir C:\vdbench
    13:19:06.835 java.class.path C:\vdbench\;C:\vdbench\classes;C:\vdbench\vdbench.jar
    13:19:06.835 os.name Windows Server 2008 R2
    13:19:06.835 os.arch x86
    13:19:06.835 os.version 6.1
    13:19:06.835 sun.arch.data.model 32
    13:19:07.100 Starting slave: C:\vdbench\vdbench SlaveJvm -m 192.203.2.3 -n 192.203.9.2-17-141222-13.19.06.679 -l eight-0 -p 5570 
    13:19:07.116 Starting slave: C:\vdbench\vdbench SlaveJvm -m 192.203.2.3 -n 192.203.11.1-20-141222-13.19.06.679 -l eleven-0 -p 5570 
    13:19:07.131 Starting slave: C:\vdbench\vdbench SlaveJvm -m 192.203.2.3 -n 192.203.5.1-14-141222-13.19.06.679 -l five-0 -p 5570 
    13:19:07.162 Successfully connected to the Vdbench rsh daemon on host 192.203.5.1
    13:19:07.162 RSH Connection to 192.203.5.1 using port 5560 successful
    13:19:07.162 Successfully connected to the Vdbench rsh daemon on host 192.203.11.1
    13:19:07.162 RSH Connection to 192.203.11.1 using port 5560 successful
    13:19:07.162 Starting slave: C:\vdbench\vdbench SlaveJvm -m 192.203.2.3 -n 192.203.4.2-13-141222-13.19.06.679 -l four-0 -p 5570 
    13:19:07.194 Successfully connected to the Vdbench rsh daemon on host 192.203.9.2
    13:19:07.194 RSH Connection to 192.203.9.2 using port 5560 successful
    13:19:07.209 Successfully connected to the Vdbench rsh daemon on host 192.203.4.2
    13:19:07.209 RSH Connection to 192.203.4.2 using port 5560 successful
    13:19:07.209 Starting slave: C:\vdbench\vdbench SlaveJvm -m 192.203.2.3 -n 192.203.10.1-18-141222-13.19.06.679 -l nine-0 -p 5570 
    13:19:07.225 Starting slave: C:\vdbench\vdbench SlaveJvm -m 192.203.2.3 -n 192.203.3.1-10-141222-13.19.06.679 -l one-0 -p 5570 
    13:19:07.256 Successfully connected to the Vdbench rsh daemon on host 192.203.3.1
    13:19:07.256 RSH Connection to 192.203.3.1 using port 5560 successful
    13:19:07.256 Starting slave: C:\vdbench\vdbench SlaveJvm -m 192.203.2.3 -n 192.203.9.1-16-141222-13.19.06.679 -l seven-0 -p 5570 
    13:19:07.272 Successfully connected to the Vdbench rsh daemon on host 192.203.10.1
    13:19:07.272 RSH Connection to 192.203.10.1 using port 5560 successful
    13:19:07.287 Starting slave: C:\vdbench\vdbench SlaveJvm -m 192.203.2.3 -n 192.203.5.2-15-141222-13.19.06.679 -l six-0 -p 5570 
    13:19:07.318 Starting slave: C:\vdbench\vdbench SlaveJvm -m 192.203.2.3 -n 192.203.10.2-19-141222-13.19.06.679 -l ten-0 -p 5570 
    13:19:07.318 Successfully connected to the Vdbench rsh daemon on host 192.203.9.1
    13:19:07.318 RSH Connection to 192.203.9.1 using port 5560 successful
    13:19:07.350 Starting slave: C:\vdbench\vdbench SlaveJvm -m 192.203.2.3 -n 192.203.4.1-12-141222-13.19.06.679 -l three-0 -p 5570 
    13:19:07.365 Successfully connected to the Vdbench rsh daemon on host 192.203.4.1
    13:19:07.365 RSH Connection to 192.203.4.1 using port 5560 successful
    13:19:07.381 Starting slave: C:\vdbench\vdbench SlaveJvm -m 192.203.2.3 -n 192.203.11.2-21-141222-13.19.06.679 -l twelve-0 -p 5570 
    13:19:07.396 Successfully connected to the Vdbench rsh daemon on host 192.203.10.2
    13:19:07.396 RSH Connection to 192.203.10.2 using port 5560 successful
    13:19:07.412 Starting slave: C:\vdbench\vdbench SlaveJvm -m 192.203.2.3 -n 192.203.3.2-11-141222-13.19.06.679 -l two-0 -p 5570 
    13:19:07.428 Successfully connected to the Vdbench rsh daemon on host 192.203.11.2
    13:19:07.428 RSH Connection to 192.203.11.2 using port 5560 successful
    13:19:07.443 Successfully connected to the Vdbench rsh daemon on host 192.203.3.2
    13:19:07.443 RSH Connection to 192.203.3.2 using port 5560 successful
    13:19:07.459 Successfully connected to the Vdbench rsh daemon on host 192.203.5.2
    13:19:07.459 RSH Connection to 192.203.5.2 using port 5560 successful
    13:19:08.832 Slow getMessage: signon 0 133718 SEND_SIGNON_INFO_TO_MASTER
    13:19:08.878 Slow getMessage: rsh_to_client 0 133233 RSH_STDERR_OUTPUT 
    13:19:08.894 Slow getMessage: rsh_to_client 1 133576 RSH_STDERR_OUTPUT 
    13:19:08.894 Slow getMessage: rsh_to_client 2 133576 RSH_STDERR_OUTPUT 
    13:19:08.894 Slow getMessage: rsh_to_client 3 133576 RSH_STDERR_OUTPUT 
    13:19:08.910 Slow getMessage: rsh_to_client 4 133592 RSH_STDERR_OUTPUT 
    13:19:08.910 Slow getMessage: rsh_to_client 5 133592 RSH_STDOUT_OUTPUT 
    13:19:08.925 Slow getMessage: rsh_to_client 6 133607 RSH_STDOUT_OUTPUT 
    13:19:09.034 Slow getMessage: rsh_to_client 0 133639 RSH_STDERR_OUTPUT 
    13:19:09.050 Slow getMessage: rsh_to_client 1 133624 RSH_STDERR_OUTPUT 
    13:19:09.050 Slow getMessage: rsh_to_client 2 133624 RSH_STDERR_OUTPUT 
    13:19:09.066 Slow getMessage: rsh_to_client 3 133640 RSH_STDERR_OUTPUT 
    13:19:09.066 Slow getMessage: rsh_to_client 4 133640 RSH_STDERR_OUTPUT 
    13:19:09.066 Slow getMessage: rsh_to_client 5 133640 RSH_STDOUT_OUTPUT 
    13:19:09.081 Slow getMessage: rsh_to_client 6 133655 RSH_STDOUT_OUTPUT 
    13:19:09.097 Slow getMessage: four-0 1 134045 SEND_SIGNON_SUCCESSFUL 
    13:19:09.097 Slave four-0 connected
    13:19:09.128 Slave five-0 connected
    13:19:09.144 Slow getMessage: signon 0 133780 SEND_SIGNON_INFO_TO_MASTER
    13:19:09.268 Slave three-0 connected
    13:19:09.300 Slow getMessage: signon 0 133838 SEND_SIGNON_INFO_TO_MASTER
    13:19:09.331 Slow getMessage: rsh_to_client 0 133569 RSH_STDERR_OUTPUT 
    13:19:09.346 Slow getMessage: rsh_to_client 1 133568 RSH_STDERR_OUTPUT 
    13:19:09.346 Slow getMessage: rsh_to_client 2 133568 RSH_STDERR_OUTPUT 
    13:19:09.346 Slow getMessage: rsh_to_client 3 133568 RSH_STDERR_OUTPUT 
    13:19:09.346 Slow getMessage: rsh_to_client 4 133568 RSH_STDERR_OUTPUT 
    13:19:09.362 Slow getMessage: rsh_to_client 5 133569 RSH_STDOUT_OUTPUT 
    13:19:09.362 Slow getMessage: rsh_to_client 6 133569 RSH_STDOUT_OUTPUT 
    13:19:09.409 Slow getMessage: six-0 1 133774 SEND_SIGNON_SUCCESSFUL 
    13:19:09.409 Slave six-0 connected
    13:19:09.424 Slave one-0 connected
    13:19:09.440 Slow getMessage: rsh_to_client 0 133617 RSH_STDERR_OUTPUT 
    13:19:09.440 Slow getMessage: rsh_to_client 1 133617 RSH_STDERR_OUTPUT 
    13:19:09.456 Slow getMessage: rsh_to_client 2 133633 RSH_STDERR_OUTPUT 
    13:19:09.456 Slow getMessage: rsh_to_client 3 133633 RSH_STDERR_OUTPUT 
    13:19:09.456 Slow getMessage: rsh_to_client 4 133633 RSH_STDERR_OUTPUT 
    13:19:09.456 Slow getMessage: rsh_to_client 5 133602 RSH_STDOUT_OUTPUT 
    13:19:09.471 Slow getMessage: rsh_to_client 6 133617 RSH_STDOUT_OUTPUT 
    13:19:09.471 Slow getMessage: rsh_to_client 0 133589 RSH_STDERR_OUTPUT 
    13:19:09.471 Slow getMessage: rsh_to_client 1 133573 RSH_STDERR_OUTPUT 
    13:19:09.471 Slow getMessage: rsh_to_client 2 133573 RSH_STDERR_OUTPUT 
    13:19:09.487 Slow getMessage: rsh_to_client 3 133589 RSH_STDERR_OUTPUT 
    13:19:09.487 Slow getMessage: rsh_to_client 4 133589 RSH_STDERR_OUTPUT 
    13:19:09.487 Slow getMessage: rsh_to_client 5 133558 RSH_STDOUT_OUTPUT 
    13:19:09.487 Slow getMessage: rsh_to_client 6 133558 RSH_STDOUT_OUTPUT 
    13:19:09.565 Slow getMessage: two-0 1 133838 SEND_SIGNON_SUCCESSFUL 
    13:19:09.565 Slave two-0 connected
    13:19:09.752 Slow getMessage: signon 0 133756 SEND_SIGNON_INFO_TO_MASTER
    13:19:09.861 Slow getMessage: signon 0 133804 SEND_SIGNON_INFO_TO_MASTER
    13:19:09.892 Slow getMessage: signon 0 133760 SEND_SIGNON_INFO_TO_MASTER
    13:19:10.048 Slave seven-0 connected
    13:19:10.064 Slave eleven-0 connected
    13:19:10.173 Slave nine-0 connected
    13:19:10.189 Slow getMessage: eight-0 1 133756 SEND_SIGNON_SUCCESSFUL 
    13:19:10.189 Slave eight-0 connected
    13:19:10.282 Slow getMessage: ten-0 1 133788 SEND_SIGNON_SUCCESSFUL 
    13:19:10.282 Slave ten-0 connected
    13:19:10.314 Slow getMessage: twelve-0 1 133745 SEND_SIGNON_SUCCESSFUL 
    13:19:10.314 Slave twelve-0 connected
    13:19:10.329 All slaves are now connected
    13:19:10.626 Slow getMessage: two-0 2 133821 HEARTBEAT_MESSAGE 
    13:19:10.641 Slow getMessage: six-0 2 133788 HEARTBEAT_MESSAGE 
    13:19:10.641 Slow getMessage: four-0 2 134068 HEARTBEAT_MESSAGE 
    13:19:10.782 Slow getMessage: eight-0 2 133741 HEARTBEAT_MESSAGE 
    13:19:10.782 Slow getMessage: twelve-0 2 133745 HEARTBEAT_MESSAGE 
    13:19:10.782 Slow getMessage: ten-0 2 133789 HEARTBEAT_MESSAGE 
    13:19:10.984 sd=sd1,lun=\\.\PhysicalDrive1 lun size: 193273528320 bytes; 180.0000 GB (1024**3); 193.2735 GB (1000**3)
    Link to Run Definitions:  run1 For loops: None
    13:19:11.140
    13:19:11.140 SlaveList.printWorkForSlaves() for rd=run1 (w)
    13:19:11.140 slv=one-0 wd=wd1 sd=sd1 rd= 75 sk=100 skw=100.00 rh= 0 th=1
    13:19:11.140
    13:19:11.140 slave=one-0 received work for 1 threads
    13:19:11.140
    13:19:11.140 host=one received work for 1 threads
    13:19:11.140 host=two received work for 0 threads
    13:19:11.140 host=three received work for 0 threads
    13:19:11.140 host=four received work for 0 threads
    13:19:11.140 host=five received work for 0 threads
    13:19:11.140 host=six received work for 0 threads
    13:19:11.140 host=seven received work for 0 threads
    13:19:11.140 host=eight received work for 0 threads
    13:19:11.140 host=nine received work for 0 threads
    13:19:11.140 host=ten received work for 0 threads
    13:19:11.140 host=eleven received work for 0 threads
    13:19:11.140 host=twelve received work for 0 threads
    13:19:11.140 Total amount of work received: 1 threads
    13:19:11.140
    13:19:11.140 Waiting for synchronization of all slaves
    13:19:11.905 Synchronization of all slaves complete
    13:19:12.001 Starting RD=run1; I/O rate: 25; elapsed=300; For loops: None
    13:19:12.002 Starting RD=run1; I/O rate: 25; elapsed=300; For loops: None
    13:19:55.635 Slow getMessage: six-0 3 133781 HEARTBEAT_MESSAGE 
    13:19:55.635 Slow getMessage: two-0 3 133830 HEARTBEAT_MESSAGE 
    13:19:55.635 Slow getMessage: four-0 3 134062 HEARTBEAT_MESSAGE 
    13:19:55.776 Slow getMessage: twelve-0 3 133749 HEARTBEAT_MESSAGE 
    13:19:55.776 Slow getMessage: eight-0 3 133744 HEARTBEAT_MESSAGE 
    13:19:55.791 Slow getMessage: ten-0 3 133792 HEARTBEAT_MESSAGE 
    Dec 22, 2014 interval i/o MB/sec bytes read resp read write resp resp queue cpu% cpu%
      rate 1024**2 i/o pct time resp resp max stddev depth sys+u sys
    13:20:12.346 1 24.85 0.19 8192 75.12 0.691 0.202 2.170 33.645 1.474 0.0 1.2 0.8
    13:20:40.628 Slow getMessage: two-0 4 133822 HEARTBEAT_MESSAGE 
    13:20:40.644 Slow getMessage: six-0 4 133775 HEARTBEAT_MESSAGE 
    13:20:40.644 Slow getMessage: four-0 4 134055 HEARTBEAT_MESSAGE 
    13:20:40.800 Slow getMessage: ten-0 4 133795 HEARTBEAT_MESSAGE 
    13:20:40.800 Slow getMessage: twelve-0 4 133751 HEARTBEAT_MESSAGE 
    13:20:40.800 Slow getMessage: eight-0 4 133747 HEARTBEAT_MESSAGE 
    13:21:12.267 2 25.82 0.20 8192 74.37 0.716 0.227 2.133 36.170 1.565 0.0 1.2 0.8
    13:21:25.652 Slow getMessage: six-0 5 133783 HEARTBEAT_MESSAGE 
    13:21:25.652 Slow getMessage: four-0 5 134048 HEARTBEAT_MESSAGE 
    13:21:25.652 Slow getMessage: two-0 5 133831 HEARTBEAT_MESSAGE 
    13:21:25.793 Slow getMessage: eight-0 5 133733 HEARTBEAT_MESSAGE 
    13:21:25.808 Slow getMessage: ten-0 5 133797 HEARTBEAT_MESSAGE 
    13:21:25.808 Slow getMessage: twelve-0 5 133753 HEARTBEAT_MESSAGE 
    13:22:10.658 Slow getMessage: two-0 6 133821 HEARTBEAT_MESSAGE 
    13:22:10.658 Slow getMessage: four-0 6 134069 HEARTBEAT_MESSAGE 
    13:22:10.674 Slow getMessage: six-0 6 133773 HEARTBEAT_MESSAGE 
    13:22:10.814 Slow getMessage: ten-0 6 133797 HEARTBEAT_MESSAGE 
    13:22:10.830 Slow getMessage: eight-0 6 133748 HEARTBEAT_MESSAGE 
    13:22:10.830 Slow getMessage: twelve-0 6 133753 HEARTBEAT_MESSAGE 
    13:22:12.267 3 24.85 0.19 8192 73.44 0.805 0.343 2.081 38.852 2.445 0.0 0.8 0.4
    13:22:55.667 Slow getMessage: two-0 7 133830 HEARTBEAT_MESSAGE 
    13:22:55.667 Slow getMessage: six-0 7 133766 HEARTBEAT_MESSAGE 
    13:22:55.667 Slow getMessage: four-0 7 134063 HEARTBEAT_MESSAGE 
    13:22:55.807 Slow getMessage: eight-0 7 133735 HEARTBEAT_MESSAGE 
    13:22:55.807 Slow getMessage: twelve-0 7 133740 HEARTBEAT_MESSAGE 
    13:22:55.807 Slow getMessage: ten-0 7 133784 HEARTBEAT_MESSAGE 
    13:23:12.268 4 24.80 0.19 8192 75.47 0.770 0.324 2.145 38.519 2.049 0.0 0.6 0.4
    13:23:40.660 Slow getMessage: two-0 8 133823 HEARTBEAT_MESSAGE 
    13:23:40.675 Slow getMessage: six-0 8 133774 HEARTBEAT_MESSAGE 
    13:23:40.675 Slow getMessage: four-0 8 134055 HEARTBEAT_MESSAGE 
    13:23:40.816 Slow getMessage: eight-0 8 133738 HEARTBEAT_MESSAGE 
    13:23:40.816 Slow getMessage: ten-0 8 133787 HEARTBEAT_MESSAGE 
    13:23:40.831 Slow getMessage: twelve-0 8 133742 HEARTBEAT_MESSAGE 
    13:24:12.267 5 25.28 0.20 8192 75.28 0.821 0.420 2.043 44.044 2.770 0.0 0.4 0.3
    13:24:12.377 avg_2-5 25.19 0.20 8192 74.64 0.778 0.328 2.100 44.044 2.250 0.0 0.7 0.5
    13:24:12.408
    13:24:12.408 Total i/o for slave=one-0 : reads: 5632 writes: 1904 total: 7536 skew: 100.00%
    13:24:12.408 Total i/o done: reads: 5632 writes: 1904 total: 7536
    13:24:12.845
    13:24:12.845 Counts reported below are for non-warmup intervals (4).
    13:24:12.845 Note that for an Uncontrolled MAX run skew is irrelevant.
    13:24:12.845 I/O count for all WDs: 6045
    13:24:12.845 Calculated skew for wd=wd1 : 6045 1511/sec (100.00%) Expected skew: 100.00%
    13:24:12.845 Flushing all reports
    13:24:12.845 Memory total Java heap: 61.875 MB; Free: 44.098 MB; Used: 17.777 MB;
    13:24:12.923 Ending Reporter
    13:24:13.437 Slow getMessage: four-0 9 134069 CLEAN_SHUTDOWN_COMPLETE 
    13:24:13.437 Slow getMessage: rsh_to_client 7 134069 RSH_STDOUT_OUTPUT 
    13:24:13.453 Slow getMessage: rsh_to_client 7 133788 RSH_STDOUT_OUTPUT 
    13:24:13.469 Slow getMessage: rsh_to_client 7 133837 RSH_STDOUT_OUTPUT 
    13:24:13.469 Slow getMessage: six-0 9 133788 CLEAN_SHUTDOWN_COMPLETE 
    13:24:13.469 Slow getMessage: two-0 9 133837 CLEAN_SHUTDOWN_COMPLETE 
    13:24:13.562 Slow getMessage: rsh_to_client 8 133928 RSH_STDOUT_OUTPUT 
    13:24:13.562 Slow getMessage: rsh_to_client 9 133928 RSH_STDERR_OUTPUT 
    13:24:13.562 Slow getMessage: rsh_to_client 10 133850 RSH_COMMAND 
    13:24:13.578 Slow getMessage: rsh_to_client 8 133696 RSH_STDOUT_OUTPUT 
    13:24:13.578 Slow getMessage: rsh_to_client 8 133648 RSH_STDOUT_OUTPUT 
    13:24:13.578 Slow getMessage: rsh_to_client 9 133696 RSH_STDERR_OUTPUT 
    13:24:13.593 Slow getMessage: rsh_to_client 7 133790 RSH_STDOUT_OUTPUT 
    13:24:13.593 Slow getMessage: rsh_to_client 7 133746 RSH_STDOUT_OUTPUT 
    13:24:13.593 Slow getMessage: rsh_to_client 7 133742 RSH_STDOUT_OUTPUT 
    13:24:13.593 Slow getMessage: rsh_to_client 9 133663 RSH_STDERR_OUTPUT 
    13:24:13.609 Slow getMessage: twelve-0 9 133747 CLEAN_SHUTDOWN_COMPLETE 
    13:24:13.609 Slow getMessage: ten-0 9 133790 CLEAN_SHUTDOWN_COMPLETE 
    13:24:13.609 Slow getMessage: eight-0 9 133742 CLEAN_SHUTDOWN_COMPLETE 
    13:24:13.625 Slow getMessage: rsh_to_client 10 133633 RSH_COMMAND 
    13:24:13.625 Slow getMessage: rsh_to_client 10 133616 RSH_COMMAND 
    13:24:13.671 Slow getMessage: rsh_to_client 8 133606 RSH_STDOUT_OUTPUT 
    13:24:13.671 Slow getMessage: rsh_to_client 9 133606 RSH_STDERR_OUTPUT 
    13:24:13.671 Slow getMessage: rsh_to_client 8 133601 RSH_STDOUT_OUTPUT 
    13:24:13.671 Slow getMessage: rsh_to_client 10 133559 RSH_COMMAND 
    13:24:13.687 Slow getMessage: rsh_to_client 9 133601 RSH_STDERR_OUTPUT 
    13:24:13.687 Slow getMessage: rsh_to_client 10 133570 RSH_COMMAND 
    13:24:13.687 Slow getMessage: rsh_to_client 8 133650 RSH_STDOUT_OUTPUT 
    13:24:13.703 Slow getMessage: rsh_to_client 9 133666 RSH_STDERR_OUTPUT 
    13:24:13.703 Slow getMessage: rsh_to_client 10 133619 RSH_COMMAND 
    13:24:13.718 Vdbench execution completed successfully. Output directory: C:\vdbench\.\testout
    13:24:13.718 Memory total Java heap: 62.062 MB; Free: 43.601 MB; Used: 18.462 MB;

  • I am working in Adobe Acrobat 9 Pro and just created a pdf form from a MS Word document. I need to find out how to have a date field in my form which will update automatically. Can some one out there help me?

    I am working in Adobe Acrobat 9 Pro and just created a pdf form from a MS Word document. I need to find out how to have a date field in my form which will update automatically.

    Update automatically under which circumstances, exactly?

  • If you have unlimited data and plan to upgrade "BE WARNED"

    This is just an FYI to all those who may fall into the trap I did. I wish I had know about this prior so I would have made my choices accordingly.
    VSW has changed the upgrade plans for those with older unlimited data plans. If you use a line upgrade to get a smartphone that line not only gets the 24 month contract but you will also be forced into a min of $30/month data plan.
    I have 3 phones on my account. 1 of them have unlimited data and the other two are simple flip phones (no data).
    For 3 years I have used one of these non-data plan lines to upgrade the smartphone and then would move the phone to the unlimited line and the flip phone back to the non-data line. This worked great as my 2 non-data lines had contracts that ended on opposite years.
    This last time I upgraded, In January, I explained to the sales person what I wanted to do, they told me they do this all the time and they would take care of it.
    My Feb bill was a bit higher than I expected so I called support. I showed them the $30 data fee and how I did not want this on a flip phone. They stated oh yes we understand, will fix it and credit you. Perfect I thought. Sure enough March's bill came and the credit was there but the $30 data charge had not been removed. I called support again and this time they dropped the hammer on me.
    My credit was an "Inconvience" credit, it was a range of $3-$8 per line, it was not a reversal of the $30 data charge. This is when I find out that VZW has now changed thier smartphone plan upgrades for accounts who are on grandfarthered in plans. If I switch to thier current plan, ie lose my unlimited data then they are more than happy to remove the data charge. So now I'm stuck paying $30 a month for the next 22 months = $660 in charges for something I will not use. A full contract 24 months $30/month is $720 which is more that the cost of most smartphones.
    If this is your situation please be sure you have all the facts prior to getting tricked into a contract worth more that the darn phone you get for "FREE!!!!"

    According to VZW support this was a policy change in 8/14, 7 months ago(ish), I'm not claiming this is brand new but I am telling others who have been with VZW for many years and still like the less expensive package they have had for those many years need to be aware that this is the rule now. In attempts to force those long term customers to go to a more expensive plan that offers far less service they have implemented this.
    I do understand this policy now and certainly will no longer use the upgrades however I wanted to offer my story as a heads up to any other potential person from running into this situation.

  • Have a Friends and Family plan. I have unlimited data and want to keep it. Questions on what I can and can not do with account changes.

    Ok,
    So I am on Friends and Family 2000minutes and unlimited Text.
    4 phones.
    My phone has Unlimited Data and Hotspot
    Other 3 do not have any data.
    I am curious what I can do and can't do that will keep keep the plan as is and not force things to share everything.
    I am allowed to have 5 phones under this plan. I am curious about adding and deleting phones.
    I did try and add a 5th phone. When I tried to activate a 5th phone online it would not let me do it. Tried to get me to change plans.
    Here are a few scenarios that I see coming up in the future.
    I would like to add a 5th phone. My father has an account and I would like to roll him into my plan instead of his own account. I have already done this once before many years ago with no problem with 2 of the lines that I currently have. Is this possible or is that enough to trigger the move share everything scenario.
    Second. how about removing a line from my plan?
    One of my numbers is for an 18YO that wants to be more independent and have their own account. Can I down the road either transfer that line and number to its own account which would be share everything (I do understand that). Or can I delete that line from the account without triggering the share everything scenario?
    Also it seems when I look online I can change data plans currently three phones are on data block. Can I actually change them to a data plan within the Friends and family or is the Share everything scenario triggered. What about if I change them to a smart phone from their basic/feature phone. I know I can't get unlimited data but can I still get them on my friends and family tiered data plan?
    What is up.
    Thank You

    yes to everything; you can add a line (up to 5 total for Family Share), drop a line, upgrade a basic line to a smartphone (and then add a tiered data plan) and stay on your current calling plan ... it may be easier done in your local Corporate Verizon store, though ... just be sure they don't try to switch you to Share Everything if that's not what you want

  • How can I get my @mac email to work? when I try to reset password, i cannot access email for this and the security tells me I have wrong date of birth

    Have used bilmac@mac email address for years last couple of weeks am getting message icloud needs password which it then rejects, when I try to reset password,they want email to verify i cannot access email and the security question is D. O B. it tells me I have wrong date of birth. so I am stumped, any ideas bilmac

    COME ON PEOPLE. (WHY ARE THE LETTERS SO BIG HERE?) I AM VERY OLD AND JUST LIKE THINGS TO STAY THE SAME. I DID NOT, DO NOT, WANT ICLOUD TO DO ANYTHING I HAVE NOT USED IT AT ALL YET IT HAS MANAGED TO MESS UP MY EMAIL ADDRESS WHICH I HAVE BEEN USING FOR YEARS, IT ASKS FOR PASSWORD THEN REJECTS AND WHEN I TRY TO RESET WITH APPLE ID THEY ASK FOR SECURITY AS I CANNOT ACCESS THE EMAIL ADDRESS THEY HAVE FOR ME BECAUSE ICLOUD ASKS FOR PASSWORD, THEN APPLE TELL ME I DONT KNOW MY OWN DATE OF BIRTH, VERY CONFUSING

  • I have an IPhone 4 and have no data so I can't receive any iMessages unless I'm on wifi. Is there a way to change it so that all my messages come in as a SMS instead of iMessage?

    I have an IPhone 4 and have no data so I can't receive any iMessages unless I'm on wifi. Is there a way to change it so that all my messages come in as a SMS instead of iMessage?

    Yeah but when Iphone users who send me messages send them in iMessage, it never gets switched to SMS!

  • Still have unlimited data plan?

    If you have been a responsible user like me and have not abused the "unlimited" data plan and are now given the choice of buying full price phones or getting the 2GB downgrade I have a question for you.  Since you are being treated like you are part of the problem why not become part of it?  I didn't, until now, stream videos or movies but since I have unlimited data I started.  I don't even care what the movie is as long as it is HD so it hogs more data.  I will do it until they kick me out as a customer. 
    My data usage is normally less than 2gb but going up.  I didn't anticipate ever using over 5 or 6GB in the next year or so but that is dependent on new applications.  Garmin now has smartlink for live traffic updates that uses data, I don't know how much it may use and before I didn't care.  I have had unlimited data since it was first offered.  I didn't do the videos and movies because I thought that if I burn through 60 to 100GB a month it would surely come to an end.  Stupid on my part!  How dare I think Verizon would give a **** about me for trying keep my data usage down but still pay for the unlimited just in case I went over.  So my reward is getting told they are doing me a favor by simplifying the plan by limiting my data to 2GB.  Or I pay full retail for a phone and keep unlimited data.  Or I keep the same phone and keep unlimited data.
    So now I have a new plan, stream HD movies anytime that it is possible.  Buy old Razr's on Ebay and keep my unlimited data and burn all the data I can.  I am writing to the Public Service Commission of Nebraska regarding this and the regular poor customer service that I just quit complaining about in the past.  If they get enough complaints the Legislature will reintroduce the bill to give the State regulatory authority over the wireless carriers.  Will it fix anything?  Probably not but it will be another thorn in Verizon's side.  I will say anytime the State has gotten involved, even thought they have no authority, Verizon has fixed the issue because they DON'T WANT OVERSIGHT!
    If you feel you have been slighted on the unlimited data plan write to your States Public Service Commission.  If they get enough complaints the wireless companies will have to deal with regulatory authority.  What are they going to do, raise the bill some more?  If so Walmart offers a cheap flip phone from Straight talk.  Not the best deal but still better than giving your money monthly to a company that hates it customers and looks for every opportunity to fleece them for every dime they can.
    >>Profanity and vulgar language removed to comply with the Verizon Wireless Terms of Service <<
    Message was edited by: Verizon Moderator

    yes; just make sure it's a Verizon-branded phone with a clean ESN

  • I just bought a new desktop and will be taking my old one to the apple store tomorrow to have the data transferred. Does the transfer include the transfer of programs or just data?

    I just bought a new desktop and will be taking my old one to the apple store tomorrow to have the data transferred. Does the transfer include the transfer of programs or just data?

    They will simply use Migration Assistant to transfer your Home folder, third-party applications and support files, and system preferences. This is something you could do yourself. You would need a Firewire cable to connect between your old computer and your new one. Migration Assistant is installed in the Utilities folder of your new computer.
    See Transferring files between two computers using FireWire and How to use Migration Assistant to transfer files from another Mac.

  • How do you transfer iTunes music and movies from an old PC to a new PC.  I have all data svaed on an external hard drive.

    How do you transfer iTunes music and movies from an old PC to a new PC.  I have all data svaed on an external hard drive.

    This article should outline the options
    http://support.apple.com/kb/HT4527

  • In numbers, can i hide rows of data in a chart and still have that data show up in my graph?

    In numbers, can i hide rows of data in a chart and still have that data show up in my graph?

    yes.
    To hide rows (or columns), select the rows (or columns), then right click in the row (or column) tab to expose the contextual menu.  Select the menu item "Hide ..."

  • How do I get the iPad to work again after I have erased data (intentionally) and do not have my base computer to plug into to access itunes?

    How do I get the iPad to work again after I have erased data (intentionally) and do not have my base computer to plug into to access itunes?

    If you have iOS 5 installed on it, you don't need a PC.  simply turn it on and set it up.
    if you don't have iOS 5 then you'll need a computer.

  • I want to upgrade iOS from 5 to 6, but when I go to synch everything in preparation, it tells me I will lose all my stuff on the iPhone and iPad which is unique.  How can I backup or do a "real synch" (both sides have same data) and then upgrade?

    I want to upgrade iOS from 5 to 6, but when I go to synch everything in preparation, it tells me I will lose all my stuff on the iPhone and iPad which is/are  unique.  How can I backup or do a "real synch" (both sides have same data at end of process) and then upgrade?

    You should really read the manual.
    "How do you restore from backup? "
    Restore.  When given the choice, choose to use backup.
    "And how can I check to see if the pics and videos are on my computer somewhere first??"
    They would only be where you put them.  What program did you use to import them?  Pics/vids taken with ipod are not part of the sync process at all.  You should be importing them just as you would with any digital camera.
    If you did not import them, then they are not on your computer.

  • Aperture Video Import Problem - from Lumix GH4: Imported clips have their dates changed to the import date.  The files show up on the hard drive but many are not showing up in Aperture.

    Aperture Video Import Problem - from Lumix GH4: Imported clips have their dates changed to the import date.  The files show up on the hard drive with import date not created date, but many of these same files are not showing up in Aperture. Sometimes the clips actually show up with the current import but take on the video information from a previously imported file.

    It was suggested I move this question to IPhoto or IMovie which I did. 
    Well moving to a different discussion group did not provide an answer to this question either. But what I finally did was import one batch of photos and videos into IPhoto for a given day at a time. Working with these I could change the date and times in order to get them in the original sequench taken. Then I would create an album with that batch. These would all be on the same day (IMove was closed for this phase). Then I would open IMovie, generate the thumbnails for that album, and select the album I had created. This was necessary because the importing process in IPhoto was using incorrect dates for my video so it was a real struggle finding them in IMove until I developed this approach.
    I believe that this whole process was so screwy because I was importing from an external hard drive not a camera. I had these photos on a PC and did not have the original cameras to use to import directly which I am fairly sure would have made this easier!

  • When you download iTunes material, does iTunes record the IP used where it is being downloaded to?  I am trying to track a lost/missing IPOD Touch and want to know if they have that data.

    When you download iTunes material, does iTunes record the IP used where it is being downloaded to?  I am trying to track a lost/missing IPOD Touch and want to know if they have that data.   It was left on a small street and someone has found it and has been hacking into my account by resetting my password.  They took about 41+ dollars from my account.   I am hoping the IP it was connecting with to download to it was tracked and that I can get that information to figure out where it is located.

    No. From the second link below.
    "Apple does not have a process to track or flag lost or stolen product
    - If you previously turned on the FIndMyiPod feature and location service is on, and wifi is on and connected go to iCloud, sign in, and go to FindMyiPhone. It the iPod has been restored it will never show up.
    - Report to police and change the passwords for all accounts used on the iPod.
    - Apple will not help
    Reporting a lost or stolen Apple product

Maybe you are looking for

  • Wrong apple ID when attempting to update apps?

    My mother, brother and I all share a family computer, with a shared iTunes library. We all download applications from the appstore and sync them to this library. To save having to download the same app twice, I often sync free apps downloaded on thei

  • FI Substitution not working in F.05

    Hello Everybody, I have setup an FI substitution (substituting Profit Center using user exit) under Financial Accounting-> Line Item and it is working fine in regular posting transactions F-02...etc.. The problem occurs when using transaction F.05. I

  • Query regarding End of File

    Hi All, How should I differentiate between End of File and blank space between lines in a file. Below is a sample input for the program: a b c d e f i j k l m nMy following code is able to read only till 'd e f'. Here is the code:         Scanner lsc

  • Shape gets pixelated when rotated

    Hello, I created a logo for a client and I'm having an issue where when I rotate a shape created with the rectangle tool, the edges become pixelated. Attached is the logo. You can see what I'm talking about with the red rectangle. How can I go about

  • How can I get status of 'Disable Database Logging'?

    Hi, in my sequence file at first I want to ask by dialog, whether sequence file should running with or without database logging. In dependance of this I want to set/reset the boolean property related with 'Disable Database Logging' checkbox in the 'D