System automatically updates the trading partner if the invoice is based on

Hi,

http://www.everymac.com/systems/apple/imac/stats/imac-core-i5-2.5-21-inch-alumin um-mid-2011-thunderbolt-specs.html
According to that it will support 16GB, and possibly even 32GB (but it would be expensive to find out)
Crucial do 8GB kits (2 x 4GB) at a reasonable price. If you have 4GB to start with, you'll need two of those to make up the 16GB (remove the existing 2 x 2GB and fill all 4 slots with 4GB sticks).
http://www.crucial.com/uk/store/listparts.aspx?model=iMac%202.5GHz%20Intel%20Qua d-Core%20i5%20%2821.5-inch%20-%20DDR3%29%20Mid%202011&Cat=RAM
OWC claim 32Gb is possible, but at around $700 that's a big leap from 16GB.
http://eshop.macsales.com/MyOWC/Upgrades.cfm?sort=pop&model=424&type=Memory
For gaming I would have thought the higher specced i7 models would be better, but I'll leave that subject to those who use WWC.
Message was edited by: noondaywitch

Similar Messages

How system automatically update the RG23A ,C,D Registers

Hi,
As after capturing of excise invoice in J1IEX system update the corresponding RG register like for RM, RG23A, For capitalk goods RG23C etc. i want to know how system find the corresponding register which is to be updated ,
, In forum i read it find on the basis of Material type , but insted of std. mat. type we have create RM for ROH , FG for FERT etc. then How system find the register automaticcaly where is the link is made for this.
regards,
zafar

Hello,
RG23A Register is update. When you are procuring some material from Vendor, then that material is Maintained in J1ID ,(as Raw material) After capture of excise invoice, system will automaticaly find RG23A register, Finding of registers is based on material types mentioned in J1ID.
RG23C is updated when the material is assigned to material types in J1ID as a Consumbales, Tools and Assets.
RG23D register will update the plant as defined as DEPOT, then RG23D register gets updated. In DEPOT there is no RG23A and RG23C register, only register is RG23D.
Regards
Mahesh Naik

HT1414 My iPad does not automatically update the operating system. Under the general tab in settings there should be Updates, but there isn't. Advice plz?

My iPad does not automatically update the operating system.how can I accomplish this?

Your post says you are on iOS 4.3.2. You need to be at least at iOS 5 to have a "Software Update" capability on your iPad. Right now, you need to update your iPad using iTunes on your computer.
Plug your iPad into iTunes (current version: 11.0.4). Let it sync. Then choose "Check for Updates" from the iPad's summary page in iTunes.

I want the system automatic update my UDFs when the OnHand was changed.

I added two UDFs in table OITW to count the warehouse OnHand by CASES and Bottles. I want the system automatic update my UDFs when the OnHand was changed. Is there any way I can do it in database level instead in the application (too much places involved).

There is few ways how to do this:
- triger as David said, but I dont recomend it through SAP policy
- in stored procedure transaction notification by adding or updating document update your user field
- create job in SQL server which in specific interval recalculate the changes of onhand and update your user defined field
- create addon which will be over functiuonalities which may change the onhand value
I think that from SAP is possible only Addon, but the easist way is trigger and if you dont need it just in time but for example every 10 seccond, the better is job which cannot fail the standard SBO transaction (triger may and may be unsafe).
Hope it helps
Petr

I'm currently running ios 5 beta on my iphone 4 and when i woke up this morning my phone had decided to automatically update the software OTA. After connecting to wifi and switching on location i proceeded to follow the instructions 'slide to setup'. I wa

I'm currently running ios 5 beta on my iphone 4 and when i woke up this morning my phone had decided to automatically update the software OTA. After connecting to wifi and switching on location i proceeded to follow the instructions 'slide to setup'. I was informed that it may take 3 minutes to activate phone but was then presented with the screen 'Could not Activate iphone', this is because the activation server is unavailable. Can anybody shed some light on this for me?
Many thanks

Can anybody shed some light on this for me?
Not here. iOS5 beta is only available to registered developers, and discussing it publicly outside of the private developer forums is a violation of the non-disclosure agreement you signed to access the beta.

System automatic propose the OK function and user cannot remove in migo_gr

Dear Friends,
Can anyone advice, in configuration of system automatic propose the OK function at the time of goods receipt with reference to PO number by migo_gr and using mvt type u2013 105 & User will not be authorized to remove the tick from ok function.
Thanks in advance.
Madhukar Mittal
SAP-MM Consultant

Hi Antony/ other SAP friends,
Ok function is made default, basic administrator has done setting that anyuser cann't remove default tick of ok function but my requirement is that even user cann't change ok function i.e unticked ok function at item level also at the time of migo_gr.
This is due to BOM explode at the time of goods receipt and user take header material from subcontractor and if child component stock is not available, he removes the child consumption ok function tick and inward header material due to that stock MBLB report and ancillary stock reconciliation problem are facing.
Can anyone advice in this matter.
Thanks
Madhukar Mittal

How do I get pages 5.2 to automatically update the date - use 10.9.2

How do I get pages 5.2 to automatically update the date in my documents - before the update I could do this. Does anybody have the knowledge or a workaround.
If not I will dump pages 5.2 and use my old version!!! this feature is important for any and all businesses using pages??
Any advice on how to achieve this is greatly appreciated
I use a number of macs all using OSX
10.9.2

I have the same problem.
What confuses me is that all the apple provided templates in pages seem to auto update their time and date upon opening.
So there MUST be a way to do it... Ive been unable to work out how...
Amnon

Automatically update the date on opening a document in Pages 5

I can't find how to automatically update the date on opening a document. I could in Pages 4.

Indeed. That seems to be the only answer to all the "improvements". At least now I can do a word count with or without spaces. Phew. (Note the sarcasm)

System automatically clears the service of half amount of total amt in po.

I whenever comes in ml81n to create the entry sheet against purchase order,and after selecting all the services to be entered there,the system automatically clear the service of half amount of total amount in po.
can some one tell me to get rid of this problem.
Regards:Vijay Kumar

In the net value field the system is bringing the half of the amount of total value in ml81n.And that is not changeable.However the value at the purchase order in net and total is the same.
Regards:VIJAY

I have a macbook pro core i7 mid 2012 And update to the latest version 10.8.4 system after updating the system I have the problem appeared to take off the device and stops at the apple logo for about 5 minutes and then enters the desktop How can I solve t

I have a macbook pro core i7 mid 2012
And update to the latest version 10.8.4 system after updating the system I have the problem appeared to take off the device and stops at the apple logo for about 5 minutes and then enters the desktop How can I solve this problem and thank you

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged after the boot, during the time something abnormal was happening. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
For example, if the problem is a slow startup taking three minutes, post the messages timestamped within three minutes after the boot time, not before. Please include the BOOT_TIME message at the beginning of the log extract.
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

System automatically truncating the data

hi Friends,
i am using jdeveloper 11.1.1.6.0.
i have created field called price it's length is Number(22,12) . whenever user is giving more than 22 digits system is truncating the 22 digit to fractional number.
ex:user input: 1234567980123456789012
system showing: 1.234567980123 .
is there any solution for the above problem.

Hi Johon,
1. Change in your vo query to fetch the price column once more time like price1
2. Change the type from number to string
I think my adf concept are good.
The idea behind this approach is that he has already tried your intelligent suggestion but not working.
I have already faced this problem and solved the same using the technique I shared over this forum.
Please read this to know why system automatically truncating the data
3.1 n-bit Unsigned Integers section
n      Minimum      Maximum
8      0      (2^8)-1 (=255)
16      0      (2^16)-1 (=65,535)
32      0      (2^32)-1 (=4,294,967,295) (9+ digits)
64      0      (2^64)-1 (=18,446,744,073,709,551,615) (19+ digits)
and your trying to save 22 digits.How it is possible?
Got it?
http://www.ntu.edu.sg/home/ehchua/programming/java/DataRepresentation.html
Edited by: 812903 on Mar 21, 2013 11:32 PM
Edited by: 812903 on Mar 21, 2013 11:43 PM

Stop automatically updating the date!

How do you keep Pages from automatically updating the date when you open an invoice?

I'm running Tiger so there may be some minor differences, but I ran a few tests starting yesterday and concluded today. If you double click on the date in any of the invoice templates it will open a pane in which (among other things) is a check box that's labeled Automatically update on open. In Tiger it's unchecked by default. Check and see how yours is set. In my tests on 4 templates, when this box was unchecked the dates remained as I set them. Three I dated as 12/6/08 and one I left with the current date. All retained the date I closed with. I noted that only the one I left unchanged would respond to the double click.
Hope this helps.
Walt

MR 11 not updating the invoicing for services

Hi All,
I have a scenario where the client uses MR11 for clearing the invoices.
He does not use MIRO for invoicing.
During our observation it is found that using MR11 does not update the invoices for services but the invoices for the material received is updated while checking the reports like ME2N.
I have checked the Service based IV and the GR based IV in the invoice tab of PO.
Can you please advice me as to why this is happening only in case of services.
Thanks and Regards
Sridhar.

Hi Charlie,
Thank you very much for the response.
Actually I am looking for the IR reduction and not the GR reduction.
The note you have mentioned applies for GR reduction.
Also we are in the ECC 6 environment.
Please update me with further information.
Regards
Sridhar

To find a user exit which update the Invoice header data

Hi,
I need a user exit which will update the invoice header data. For eg I need to update the fields RBKP_V-ESRNR and RBKP_V-ESRRE in table RBKP_V. I was using this user exit EXIT_SAPLMRMP_010 (Program ZXM08U16).But this is not working fine as this has no exporting parameter nor tables of structure RBKP_V.
I need for transaction MIRO.
Kindly help ...
Points will be rewarded
Thanks in advance

Hi jayasree,
with the help of the below given program you can find out the requried user exit by giving the T code (MIRO).
*& Report Z_USEREXIT_DISPLAY *
Title : Display UserExits *
Transport Request No : *
Modification Log *
ModNo Date Consultant Description of Change(s) *
REPORT z_userexit_temp
NO STANDARD PAGE HEADING
LINE-SIZE 200
MESSAGE-ID zz.
T A B L E D E C L A R A T I O N S *
TABLES: tftit,
e071,
e070.
S T R U C T U R E D E C L A R A T I O N S *
TYPES: BEGIN OF x_tstc,
tcode TYPE tcode,
pgmna TYPE program_id,
END OF x_tstc.
TYPES: BEGIN OF x_tadir,
obj_name TYPE sobj_name,
devclass TYPE devclass,
END OF x_tadir.
TYPES: BEGIN OF x_slog,
obj_name TYPE sobj_name,
END OF x_slog.
TYPES: BEGIN OF x_final,
name TYPE smodname,
member TYPE modmember,
include(15), "Include name
END OF x_final.
I N T E R N A L T A B L E D E C L A R A T I O N S *
DATA: it_tstc TYPE STANDARD TABLE OF x_tstc WITH HEADER LINE.
DATA: it_tadir TYPE STANDARD TABLE OF x_tadir WITH HEADER LINE.
DATA: it_jtab TYPE STANDARD TABLE OF x_slog WITH HEADER LINE.
DATA: it_final TYPE STANDARD TABLE OF x_final WITH HEADER LINE.
V A R I A B L E S D E C L A R A T I O N S *
U S E R I N P U T S S C R E E N *
S E L E C T I O N S C R E E N *
SELECTION-SCREEN: BEGIN OF BLOCK blk01 WITH FRAME TITLE text-t01.
PARAMETERS: p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN END OF BLOCK blk01.
S t a r t o f S e l e c t i o n *
START-OF-SELECTION.
PERFORM get_tcodes. "Get Tcodes
PERFORM get_objects. "Get Objects
E n d o f S e l e c t i o n *
END-OF-SELECTION.
PERFORM display_results. "Display Results
*& Form get_tcodes
Get Tcodes
FORM get_tcodes.
SELECT tcode
pgmna
INTO TABLE it_tstc
FROM tstc
WHERE tcode = p_tcode.
IF sy-subrc = 0.
SORT it_tstc BY tcode.
ENDIF.
ENDFORM. " get_tcodes
*& Form get_objects
Get Objects
FORM get_objects.
DATA: l_fname LIKE rs38l-name,
l_group LIKE rs38l-area,
l_include LIKE rs38l-include,
l_namespace LIKE rs38l-namespace,
l_str_area LIKE rs38l-str_area.
DATA: v_include LIKE rodiobj-iobjnm.
DATA: e_t_include TYPE STANDARD TABLE OF abapsource WITH HEADER LINE.
DATA: l_line TYPE string,
l_tabix LIKE sy-tabix.
IF NOT it_tstc[] IS INITIAL.
SELECT obj_name
devclass
INTO TABLE it_tadir
FROM tadir FOR ALL ENTRIES IN it_tstc
WHERE pgmid = 'R3TR' AND
object = 'PROG' AND
obj_name = it_tstc-pgmna.
IF sy-subrc = 0.
SORT it_tadir BY obj_name devclass.
SELECT obj_name
INTO TABLE it_jtab
FROM tadir FOR ALL ENTRIES IN it_tadir
WHERE pgmid = 'R3TR' AND
object = 'SMOD' AND
devclass = it_tadir-devclass.
IF sy-subrc = 0.
SORT it_jtab BY obj_name.
ENDIF.
ENDIF.
ENDIF.
*- Get UserExit names
LOOP AT it_jtab.
SELECT name
member
INTO (it_final-name, it_final-member)
FROM modsap
WHERE name = it_jtab-obj_name AND
typ = 'E'.
APPEND it_final.
CLEAR it_final.
ENDSELECT.
ENDLOOP.
*- Process it_final contents.
LOOP AT it_final.
l_tabix = sy-tabix.
CLEAR: l_fname,
l_group,
l_include,
l_namespace,
l_str_area.
l_fname = it_final-member.
CALL FUNCTION 'FUNCTION_EXISTS'
EXPORTING
funcname = l_fname
IMPORTING
group = l_group
include = l_include
namespace = l_namespace
str_area = l_str_area
EXCEPTIONS
function_not_exist = 1
OTHERS = 2.
IF sy-subrc = 0.
IF NOT l_include IS INITIAL.
*- Get Source code of include.
CLEAR: v_include, e_t_include, e_t_include[].
v_include = l_include.
CALL FUNCTION 'MU_INCLUDE_GET'
EXPORTING
i_include = v_include
TABLES
e_t_include = e_t_include.
IF sy-subrc = 0.
LOOP AT e_t_include.
IF e_t_include-line CS 'INCLUDE'.
CLEAR l_line.
l_line = e_t_include-line.
CONDENSE l_line NO-GAPS.
TRANSLATE l_line USING '. '.
l_line = l_line+7(9).
it_final-include = l_line.
MODIFY it_final INDEX l_tabix TRANSPORTING include.
ENDIF.
ENDLOOP.
ENDIF.
ENDIF.
ENDIF.
ENDLOOP.
ENDFORM. " get_objects
*& Form display_results
Display Results
FORM display_results.
FORMAT COLOR COL_HEADING.
WRITE:/1(150) sy-uline.
WRITE:/ sy-vline,
2(23) 'Extension Name',
24 sy-vline,
25(39) 'Exit Name',
64 sy-vline,
65(74) 'Description',
140 sy-vline,
141(9) 'Include',
150 sy-vline.
WRITE:/1(150) sy-uline.
FORMAT RESET.
SORT it_final BY name member.
LOOP AT it_final.
CLEAR tftit.
SELECT SINGLE stext
INTO tftit-stext
FROM tftit
WHERE spras = 'EN' AND
funcname = it_final-member.
WRITE:/ sy-vline,
it_final-name COLOR COL_KEY, 24 sy-vline,
25 it_final-member, 64 sy-vline,
65 tftit-stext, 140 sy-vline,
141 it_final-include, 150 sy-vline.
WRITE:/1(150) sy-uline.
ENDLOOP.
Regards
Srinivas

The other day my system automatically updated to the latest Adobe Flash PLayer version 11.8

I have since had to remove it because the ADP software I use on the same PC will not operate with the latest version active. Is it possible to download the older 11.7 version so I can use the Flash Player without interfering with the ADP Payroll system?

Uninstall the current version, then download the version you want from http://helpx.adobe.com/flash-player/kb/archived-flash-player-versions.html
Use the Flash Player Settings Manager to disable automatic updates.

System automatically updates the trading partner if the invoice is based on

Similar Messages

Maybe you are looking for