System does not show the logo and header
Hi,
My system doesn't show the header & Logo in ALV Grid Report. Other system showed that report Properly. Please Clarify.
DATA : head1 TYPE slis_listheader,
head2 TYPE slis_t_listheader.
form head.
head1-typ = 'H'.
head1-info = 'REPORT Check'.
APPEND head1 TO head2.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = head2
i_logo = 'ENJOY_SAP_LOGO'
I_END_OF_LIST_GRID = ''
endform.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-repid
i_callback_top_of_page = 'head' .
the above report does not display the SAP logo and header info. please help. the same report is display the logo and info. in other system. Please clarify.
Edited by: bala on Dec 8, 2008 10:44 AM
Similar Messages
-
i got my new iphone 4s , can not download the OS 5 it says error 9006 on my windows 7. also the phone does not show the capacity and serial number details on the itunes summery ?? please help
Hi Kevin,
The iPhone 4S comes automatically loaded with iOS 5, and any updates after iOS 5.0 can be completed directly from on the phone in Settings > General > Software Update. If you are having trouble using iTunes to update software, I suggest you reset iTunes so that you can pair your phone to the computer again, because if you can't see the serial number and capacity, that generally means your phone isn't paired. For any problems this doesn't fix, please contact Apple directly through their automated help line, 1(800)MYAPPLE. -
Project View does not show the Path and Filename when errors occur
I have the problem, that errors occur in the project but in the colum that shows the "Resource" I can only see the "Project Name". Normally it should show the filename. The "Path Column" is completely empty. The "Location column" shows the correct line number in the file (but unfortunately I have no Idea which file). Double clicking on the row does not do anything.
I'm sure it had worked, but no idea since when this problem occurs. I am using Flash Builder 4.7.I was able to resolve this by repairing permissions, even though no permissions error was listed specifically for that file.
I could also have recovered it through Time Machine, but I'm interested in knowing how not to have this happen again!
I was afraid of rebooting and possibly losing track even of the ghost.
I did not try EasyFind - I'll keep that in mind next time.
Thanks for all the comments. -
I have an ipad 3 wifi+cellular,recently my ipad though connected to the wi-fi stopped showing the wi-fi icon on the top bar.I can use the internet on safari and other apps,but unable to download apps from store
Are you sure that your iPad is connected to WiFi? It may be using cellular data.
Go to Settings > WiFi and see if you are connected. -
Imovie on my ipad does NOT SHOW the INTRO and CREDITS.....
Please help!
I am confused what you mean?
Did you make the intro and credits?
Have you tried to save out to camera roll?
what version of iMovie? -
Nexus 7009 does not show the N7K-F248XP-25 modules ethernet ports n sh run
Hi everyone,
I have a question...
I going to install two Nexus 7009 with three N7K-F248XP-25 modules on each one, I am planning to create 3 VDC, but at the initial configuration the system does not show the Ethernet ports of these modules, even with the show inventory and show module I can see that the modules are recognized and its status is OK. There is something that I have to do before start to configure these modules...? enable some feature or license in order to see the ports with show running CLI...?You can enable F1, F2, M1, M1XL and M2XL Series modules. There are no restrictions on the type of mix allowed for the system module-type command. The system module-type command allows a mix of F1, F2, M1, M1XL, and M2XL Series modules in the VDC.
Note The limit-resource module-type command controls the restrictions on the module-types that can be mixed in the VDC.
Note Use the system module-type f2 command to allow F2E Series modules into a VDC. The ports from F2 and F2E Series modules can be allocated like any other ports.
Note The modules that you do not enable must not be powered on after you configure this feature and enter yes. An error message will force you to manually disable these modules before proceeding. This prevents major disruption and service issues within a VDC.
The no form of this command resets the configuration mode to allow all modules.
hope this helps -
BBP_MON_SC : does not show the details of the Shopping cart
Hi,
We are in SRM4.0 and Stack 11.
when we use the transaction:BBP_MON_SC to check the Shopping cart and get into the details, the system does not show the "details of the shopping cart".
The sequence of the steps :
1) click on the "monitor shopping cart"(BBP_MON_SC) in our web browser
and search the SC by date.
2) The list of the SC created on the specific date come up.
3) when we select a SC to get into the details the system shows
a "BLANK SCREEN".
Thanks in advance.
Regards,
RK.Hi,
First check whether you have implementedany custom BADI at the SC item level.If the BADi is wrongly implemented then you may not be able to see the item details.
Also Make sure that BASIS Team has assigned correct roles and profiles to the administrator user. Ask BASIS to use SAP provided roles and then you can try out again. (Try this role - SAP_EC_BBP_ADMINISTRATOR / SAP_BBP_STAL_ADMINISTRATOR )
Here are the related links ->
http://help.sap.com/saphelp_srm50/helpdata/en/a0/10213862f7bd47e10000009b38f8cf/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/9f/a47c3c989d501fe10000000a114084/frameset.htm
http://help.sap.com/saphelp_srm50/helpdata/en/15/46d19e4069d14e92decb87d6a56b9c/frameset.htm
Incase it does not help, then, Without assigning any other roles, try logging to the transaction - BBP_MON_SC via SAP GUI instead of webpage and then do once you get some authorization issue /error, using SU53 Transaction, you can get the required Authorization objects need to attached to the user profile.
Alternatively, For time being, Try assigning SAP_ALL and SAP_NEW to the Administrator Buyer user role of that user.
Also have a look at these notes:
Note 636270 Shopping cart monitor: Display of SC if user is deleted
Note 764135 Shopping cart monitor: Selection according to 'Created by'
Note 865179 BBP_MON_SC: Search for shopping carts shows wrong results
Note 683524 Shopping cart monitor does not display all shopping carts
Note 1045386 BBP_MON_SC: No DELETED Event after deletion
Note 829529 BBP_MON_SC: Displaying shopping cart of a locked user
901427 BBP_MON_SC: Requester instead of creator in overview list
859012 BBP_MON_SC: Deleted shopping carts are not found
882884 BBP_MON_SC: Deleting items in the status I1116
792542 Shopping cart monitor: incor. return URL from shopping cart
672764 Shopping cart monitor: Display of deleted shopping carts
Note 522620 Shopping cart monitor: Customer enhancement / BADI
Note 889942 BBP_MON_SC: Service item can't be searched by perform.period
949399 SC monitor: Search help does not display all catalogs
972697 bbp_mon_sc: No result for limit shopping cart search
901608 BBP_MON_SC: Service Item search is incorrect
813434 Shopping cart monitor and internal ITS:Shopping cart display
669720 BBP_MON_SC: Follow-on document is not found
625694 Not possible to search for SHB based on some docs in monitor
596089 SHP Monitor: problems with search functionalities
Note 561186 Monitor shopping cart: Selection of large datasets
BR,
Disha.
Pls reward points for useful answers. -
Why this query does not show the result?
Why the query with the schema prefixed does not show the result and the query without schema display the correct results?
SQL> select data_object_id,object_type from dba_objects where object_name='HR'.'JOBS';
select data_object_id,object_type from dba_objects where object_name='HR'.'JOBS'
ERROR at line 1:
ORA-00933: SQL command not properly ended
SQL> select data_object_id,object_type from dba_objects where object_name='HR.JOBS';
no rows selected
SQL> select data_object_id, OWNER, object_type from dba_objects where object_name='JOBS';
DATA_OBJECT_ID OWNER OBJECT_TYPE
69662 HR TABLE
OE SYNONYM
SQL> SELECT USER FROM DUAL;
USER
SYSHi,
the column object_name refers to a object_name which is 'JOBS', the column owner refers to the owner 'HR', the value isn't stored together, so you have to select the two columns. It is the same behaviour as every other table/view. Have a look at the values in the view DBA_OBJECTS.
Herald ten Dam
Superconsult.nl -
I lost my iphone and my macbook pro does not show the icloud in system pref. how do i get icloud on my mac?
iCloud is only available in Lion, 10.7. You will have to upgrade to Lion in order to get into iCloud. If you transfered a .mac or .me address to iCloud through mobile me, or you have another device iCloud enabled, then you can log into the iCloud.com website.
-
Migo is not showing the excise tab - header level and item level
Hi,
i have created one PO with excise and i have created MIGO with only capture excise invoice, in MIGO before saving the document system is showing the excise basic, cess and higher education cess in excise tab, header level as well as item level. After saving the document, if i go to dispaly view of the MIGO document system is not showing the header level as well as item level excise amount. The tab itself is not appearing. Can any one help me on this.Hi,
There are two kinds of statuses, system status and user status.
You can only influence System status if you execute a business transaction that changes the system status.there
are four system statuses open, In process,Released and Completed.
User status can be created as additional information to the system status in any numbers.But for this you
need to define a status profile which would further be assigned to transaction type(header status) and
item categories(item status).
The header status is independent of the item status. One exception is the status Completed.
If all items have the status Completed, the header status is also set to Completed.
For defining a status profile you need to go to
SPRO>Customer Relationship Management>Transactions>Basic settings>Status Management.
Hope this helps.
Regards
Sidd -
I have an I phone 4s and I have many contacts in my phone. However, when my phone rings or I receive a message. The phone does not show the name of the caller. It only shows the phone number that is calling. I am sure this is a setting problem, but I have checked every setting I can think of. Any suggestions??
If you are a Verizon user try this:
Open the phone and dial *228. This is a Verizon over-the-air programming number.
When the system answer press 1 for "Program or activate your phone"
Wait for the call to disconnect. You should get a prompt stating "Settings updated."
Double tap the Home button to bring up the recently used apps list at the bottom. Locate the Phone, Message, and Contacts apps, swiping if necessary, and press and hold until they jiggle then press the red minus sign to stop them.
Wait a 3-5 minutes.
Try your phone again and see if it's fixed. -
i'm trying to use idvd '09 version 7.1.2 on a powerbook running lion 10.7.2, the system does not locate any themes and therefore will not boot up, any suggestions?
Hi
May be help here
iDVD Themes
iDVD 1 to 7.0.4
Root level = Macintosh HD / Library / Application Support / iDVD / Themes
or
Macintosh HD / USERS / Your name or login identity / Library / Application Support / iDVD / Installed Themes
iDVD 7.1 (from F Shippey )
The iDVD 7 themes are part of the iDVD 7 application package.
iDVD - ctrl-click Show content of package
Resources / Plug-ins/ - and here they are
See if You can restore them manually.
Yours Bengt W -
WPF: How to make the first column does not show row separator and Left column separator in DataGrid?
Our WPF application uses DataGrid.
One of request is that first column of DataGrid does not show row separator and also does not show Left column separator. So it looks like the first column does not belong to the DataGrid. However, when select a row, the cell of first column still get selected.
How do we make it? Thx!
JaneCHi Magnus,
Thanks for replying our question and provide your solution!
Your solution works by setting "HorizontalGridLinesBrush" and "VerticalGridLinesBrush" to {x:Null} in the DataGrid style and modify "CellStyle" in first column as following:
<DataGridTextColumn MinWidth="32"
Binding="{Binding CellName}"
CanUserReorder="False"
CanUserSort="False"
Header="Cell}"
IsReadOnly="true" >
<DataGridTextColumn.CellStyle>
<Style TargetType="DataGridCell">
<Setter Property="IsEnabled" Value="False"></Setter>
<Setter Property="Template">
<Setter.Value>
<ControlTemplate TargetType="{x:Type DataGridCell}">
<Border BorderThickness="0" BorderBrush="{x:Null}"
Background="{Binding Background, RelativeSource={RelativeSource AncestorType={x:Type DataGrid}}}" Margin="-1">
<Grid Background="{TemplateBinding Background}" VerticalAlignment="Center" Height="42">
<ContentPresenter VerticalAlignment="Center"/>
</Grid>
</Border>
</ControlTemplate>
</Setter.Value>
</Setter>
</Style>
</DataGridTextColumn.CellStyle>
</DataGridTextColumn>
We found another way to achieve it by using DataGridRowHeader. The good way to use DataGridRowHeader is that we do not need to make the first column ReadOnly (click on first column does not select whole row anymore). Select RowHeader in a row will select
whole row. Move scroll bar horizontally, the row header still keep in visible area.
<Style TargetType="{x:Type DataGridRowHeader}" x:Key="dataGridRowHeaderStyle">
<Setter Property="VerticalContentAlignment" Value="Center" />
<Setter Property="HorizontalAlignment" Value="Center" />
<Setter Property="Height" Value="42" />
<Setter Property="SeparatorBrush" Value="{x:Null}" />
<Setter Property="FontSize" Value="16" />
<Setter Property="Template">
<Setter.Value>
<ControlTemplate TargetType="{x:Type DataGridRowHeader}">
<Grid>
<Border x:Name="rowHeaderBorder"
BorderThickness="0"
Padding="3,0,3,0"
Background="{Binding Background, RelativeSource={RelativeSource AncestorType={x:Type DataGrid}}}"
BorderBrush="{x:Null}">
<ContentPresenter HorizontalAlignment="{TemplateBinding HorizontalContentAlignment}"
VerticalAlignment="{TemplateBinding VerticalContentAlignment}"
SnapsToDevicePixels="{TemplateBinding SnapsToDevicePixels}" />
</Border>
</Grid>
</ControlTemplate>
</Setter.Value>
</Setter>
</Style>
<DataGrid>
<DataGrid.RowHeaderStyle>
<Style TargetType="DataGridRowHeader" BasedOn="{StaticResource dataGridRowHeaderStyle}">
<Setter Property="Content" Value="{Binding CellName}" />
<Setter Property="Width" Value="35"/>
</Style>
</DataGrid.RowHeaderStyle>
</<DataGrid>
JaneC -
I tried to rename a file, it gave me an error message (can't remember the number - 43??) and then the file disappeared from the original folder. When I do a search, the file comes up under the new name, but it does not show a path, and even though preview shows the contents, I can't open the document (Powerpoint) and I can't move the document. I tried "Copy" and paste but it doesn't work. I tried "Share" with Airdrop and iChat, but the file is inaccessible. When i try to rename the file, it says the filename is too long.
When I try to open it, it says the alias is not good, and asks if I want to fix the alias. I'm afraid to do that and lose all access to this document.
Right now, it feels like a ghost document - it is on the computer intact, but it is in an undisclosed location and inaccessible.
Please help!!I was able to resolve this by repairing permissions, even though no permissions error was listed specifically for that file.
I could also have recovered it through Time Machine, but I'm interested in knowing how not to have this happen again!
I was afraid of rebooting and possibly losing track even of the ghost.
I did not try EasyFind - I'll keep that in mind next time.
Thanks for all the comments. -
When I try to watch any video clip I get this:
The version of “Adobe Flash Player” on your system does not include the latest security updates and has been blocked. To continue using “Adobe Flash Player”, download an updated version from Adobe’s website.
I tried clicking on the Adobe Flash Player. It said it accepted it but it did not make a difference.
Can anyone help?
Thank you!This did not work
On Mon, Oct 27, 2014 at 8:59 PM, Apple Support Communities Updates <
Maybe you are looking for
-
I do not know what to do. If you come into contact, then the function FaceTime is frozen Please help
-
Hi All, this query would be used to have info about stock on hand qty of batch item. I am not so sure about it, could you please make sure if it is wrong or not ? The query: SELECT T0.[ItemCode], T0.[ItemName], T0.[ItmsGrpCod], T2.[WhsCode], T1.[Batc
-
Error when incident is recorded "Exception Occured"
Hi All, We are using NetWeaver Business client(NWBC) for SAP EHS 2.0. Getting an error after when incident is submitted to report Managers. Incident get recording with out any issue but displaying an error "Exception Occured". Please advice. I was us
-
Production Issue heap space error. Getting ERROR 503 Service not deployed
Hi, I have deployed my web services (VAS services) in tomcat 6.0 in production .I am using axis2 1.4.1 as web service engine and apache 2.2 for httpd service. My problem is that in every 8-10 hrs when no of transactions increase, a problem occurs in
-
Partitioning items in the delivery
Hello all, I've been testing condition type K007 in my sales orders. I've noted that I'm able to create the sales orders, deliveries and invoices with the correct discount. One thing is strange: I create the Nota Fiscal which is accepted ONLY IF I do