System error 5 has occured

Hi,
I am using Oracle 10g database express edition in windows vista business. While i am trying to strat the database it shows error as "system error 5 has occured" and whenever i am trying to connect the databse from SQL * PLUS it thrown error . error as follows." ORA-12154:TNS :could not resolve the connect identifier specified". TNSNAMES.ORA file as below
# tnsnames.ora Network Configuration File: C:\OracleDevSuiteHome\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = Ganesh)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = ORACLEXE)
RAM =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = Ganesh)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = XE)
)

Hi Muhammad,
The error message is “Access Denied”, you need to logon as an account which has sufficient privileges to perform this action.
In addition, I suggest you open Services and navigate to the problematic service, then check the account information under Log on tab.
Here are some similar threads below I suggest you refer to:
Windows 2008 service access is denied.
http://social.technet.microsoft.com/Forums/windowsserver/en-US/e57de215-a013-40cd-80ea-ed38e2a7f092/windows-2008-service-access-is-denied?forum=winserversecurity
Services Cannot Start on Win Server 2008 R2
http://social.technet.microsoft.com/Forums/windowsserver/en-US/68215d6c-683e-4495-ab50-26a5ad8ea239/services-cannot-start-on-win-server-2008-r2?forum=winservergen
WS2008R2 shows BFE service will not start - access denied
http://social.technet.microsoft.com/Forums/windowsserver/en-US/f2e08bcf-d517-40a7-9c69-8cacc2fa5330/ws2008r2-shows-bfe-service-will-not-start-access-denied?forum=winservergen
Best Regards,
Amy

Similar Messages

BAPI_GOODSMVT_CREATE ERROR: A System Error Has Occurred While Locking

Hi All,
I am having a problem with a Z program that I am writing.
Basically, it uses the BAPI mentioned in the title. The program will read excel file that is being uploaded, and then will segregate the line items by 200 lines.
That means, if I were to upload 1000 line items, the BAPI will be called and executed 5 times (1000/200 = 5).
However, when trying to upload 10000 line items, I received this error after around 3000 line items.
"A system error has occurred while locking".
This happens when IMPORT parameter TEST_RUN is set to 'X'.
I found this after some googling: http://sap.ittoolbox.com/groups/technical-functional/sap-basis/lock-entry-system-error-1674434
I am hoping for your expert thoughts on this.
Thank you.

BAPI TO Upload Inventory Data
* GMCODE Table T158G - 01 - MB01 - Goods Receipts for Purchase Order
*                      02 - MB31 - Goods Receipts for Prod Order
*                      03 - MB1A - Goods Issue
*                      04 - MB1B - Transfer Posting
*                      05 - MB1C - Enter Other Goods Receipt
*                      06 - MB11
* Domain: KZBEW - Movement Indicator
*      Goods movement w/o reference
* B - Goods movement for purchase order
* F - Goods movement for production order
* L - Goods movement for delivery note
* K - Goods movement for kanban requirement (WM - internal only)
* O - Subsequent adjustment of "material-provided" consumption
* W - Subsequent adjustment of proportion/product unit material
report zbapi_goodsmovement.
parameters: p-file like rlgrap-filename default
                                 'c:\sapdata\TEST.txt'.
parameters: e-file like rlgrap-filename default
                                 'c:\sapdata\gdsmvterror.txt'.
parameters: xpost like sy-datum default sy-datum.
data: begin of gmhead.
        include structure bapi2017_gm_head_01.
data: end of gmhead.
data: begin of gmcode.
        include structure bapi2017_gm_code.
data: end of gmcode.
data: begin of mthead.
        include structure bapi2017_gm_head_ret.
data: end of mthead.
data: begin of itab occurs 100.
        include structure bapi2017_gm_item_create.
data: end of itab.
data: begin of errmsg occurs 10.
        include structure bapiret2.
data: end of errmsg.
data: wmenge like iseg-menge,
      errflag.
data: begin of pcitab occurs 100,
        ext_doc(10),           "External Document Number
        mvt_type(3),           "Movement Type
        doc_date(8),           "Document Date
        post_date(8),          "Posting Date
        plant(4),              "Plant
        material(18),          "Material Number
        qty(13),               "Quantity
        recv_loc(4),           "Receiving Location
        issue_loc(4),          "Issuing Location
        pur_doc(10),           "Purchase Document No
        po_item(3),            "Purchase Document Item No
        del_no(10),            "Delivery Purchase Order Number
        del_item(3),           "Delivery Item
        prod_doc(10),          "Production Document No
        scrap_reason(10),      "Scrap Reason
        upd_sta(1),            "Update Status
      end of pcitab.
call function 'WS_UPLOAD'
exporting
    filename                      = p-file
    filetype                      = 'DAT'
* IMPORTING
*   FILELENGTH                    =
tables
    data_tab                      = pcitab
* EXCEPTIONS
*   FILE_OPEN_ERROR               = 1
*   FILE_READ_ERROR               = 2
*   NO_BATCH                      = 3
*   GUI_REFUSE_FILETRANSFER       = 4
*   INVALID_TYPE                  = 5
*   OTHERS                        = 6
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
          with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
exit.
endif.
gmhead-pstng_date = sy-datum.
gmhead-doc_date = sy-datum.
gmhead-pr_uname = sy-uname.
gmcode-gm_code = '01'.   "01 - MB01 - Goods Receipts for Purchase Order
loop at pcitab.
itab-move_type = pcitab-mvt_type.
itab-mvt_ind    = 'B'.
itab-plant      = pcitab-plant.
itab-material   = pcitab-material.
itab-entry_qnt = pcitab-qty.
itab-move_stloc = pcitab-recv_loc.
itab-stge_loc   = pcitab-issue_loc.
itab-po_number = pcitab-pur_doc.
itab-po_item    = pcitab-po_item.
concatenate pcitab-del_no pcitab-del_item into itab-item_text.
itab-move_reas = pcitab-scrap_reason.
append itab.
endloop.
loop at itab.
write:/ itab-material, itab-plant, itab-stge_loc,
          itab-move_type, itab-entry_qnt, itab-entry_uom,
          itab-entry_uom_iso, itab-po_number, itab-po_item,
                                              pcitab-ext_doc.
endloop.
call function 'BAPI_GOODSMVT_CREATE'
exporting
    goodsmvt_header             = gmhead
    goodsmvt_code               = gmcode
*   TESTRUN                     = ' '
* IMPORTING
    goodsmvt_headret            = mthead
*   MATERIALDOCUMENT            =
*   MATDOCUMENTYEAR             =
tables
    goodsmvt_item               = itab
*   GOODSMVT_SERIALNUMBER       =
    return                      = errmsg
clear errflag.
loop at errmsg.
if errmsg-type eq 'E'.
    write:/'Error in function', errmsg-message.
    errflag = 'X'.
else.
    write:/ errmsg-message.
endif.
endloop.
if errflag is initial.
commit work and wait.
if sy-subrc ne 0.
    write:/ 'Error in updating'.
    exit.
else.
    write:/ mthead-mat_doc, mthead-doc_year.
    perform upd_sta.
endif.
endif.
*       FORM UPD_STA                                                  *
form upd_sta.
loop at pcitab.
    pcitab-upd_sta = 'X'.
    modify pcitab.
endloop.
call function 'WS_DOWNLOAD'
    exporting
      filename                      = p-file
      filetype                      = 'DAT'
* IMPORTING
*   FILELENGTH                    =
    tables
      data_tab                      = pcitab
* EXCEPTIONS
*   FILE_OPEN_ERROR               = 1
*   FILE_READ_ERROR               = 2
*   NO_BATCH                      = 3
*   GUI_REFUSE_FILETRANSFER       = 4
*   INVALID_TYPE                  = 5
*   OTHERS                        = 6
endform.
Code Formatted by: Alvaro Tejada Galindo on Dec 26, 2008 10:20 AM

A system error has occurred while locking

Hi, we encountered the error "A system error has occurred while locking" when executed transaction mm01. They said it's because the same material was launched in VL02n (outbound delivery) How can I check if it was really because of VL02n? they said that the lock was already deleted by Basis. Is there any tcode I can check where it really came from? thanks so much!

Hi,
If you are authorised for TCode - SE37 then execute the Function Module "TRANSACTION_CALL_VIA_RFC" and then enter TCode SM12 and execute. And then follow the option as suggested in earlier post.

ERROR - A system error has occured in lock management

Dear All ,
I have a major issue in my workflow in production client . In SWEL there are some workflows which
got started & then error occured as per the message " A system error has occured in lock management " and no workitem gets created .
This issue happened just 1 day back and still continues somtimes .
If any one have any idea on the issue , what is the root cause of the issue , please suggest how to solve the same .
Regards
Prabhu

No WF-BATCH is not locked . This issue does not happen every time , it happens some times .other wise workflow runs fine .
I will tell you when i checked abot the error message by clicking F1 help i got the below message details-
An error occurred in lock management when attempting to set a lock on table SWWWIHEAD.
The data cannot be processed at the moment. The data is displayed.
So i think there is some issue happens in updating the entry in the table which happens some times , and gets rectified automatically . But the workflow which gets affected by this error does not start .
so any idea on the same .
Regards
Prabhu

When taking a test for a job application the new tab opens up and tells me a system error has occurred

I have to take a talent assessment test for a job application but when the tab comes up it tells me I have a system error has occurred. What does that mean?

Hi Bob,
I have question that I hope you can answer. I am trying to decide how to set up my wireless network with a 4th generation Airport Time Capsule (802.11n) with a 5th generation Airport Extreme (802.11n). I have read that you can extend your wireless network, but I am unsure which device I should have connected to the modem, etc., or what setup is the best way to utilize these devices. I want to setup my wireless network and get the most out of each device while making it so that internet connection is "excellent" throughout the house. In addition, I also want to be able to use Time Capsule or Airport Etreme to back up with Time Machine. Basically, I don't understand what it is that I have and how to use it in the best way.
Any help with this matter would be greatly appreciated.
Thank you,
Michael

Encountered : A system error has occurred while locking, pls help

Dear All..
pls help..
while executing some of our remote function module we encountered some locking error.. the message returned by SAP is :
A system error has occurred while locking
from message class : M3 #021
the remote function module is running bapi_goodsmvt_create in background..
the question is.. why this error occured and how to solve it ? and what is the root cause.. ?
because the error is only happened once (until now) we cannot simulate to get the error again.. so it is hard to find out the root cause..
thanks for the help..
sasmente

Hi,
I am also having the same problem. I am running the BAPI_MATPHYSINV_CHANGECOUNT' to count the Articles.
When I print the error on screen, some the data shown as counted. Some are not changed and some with the following error.
System error while locking the data
Furthermore I went to the BASIS and saw that when we run this particular program its showing the locks on MARC and several tables with the same System ID from which we run the program
Can anyone come up ? Its getting too hard to resolve.

A system error has occured while locking

Message no. M3021 : A system error has occured while locking
I get this message in TCODE MM42 (IS RETAIL) after mass updating articles using TCODE MM46.
The lock table size was increased from 4 MB to 10 MB and still the issue occurs. It looks the lock table can store only 3600 entries, is there a way to increase number of entries.
Thanks
Jagadhish Natarajan

First, is this mass update going to happen on reguarly?
If no - you may want to further increase enque/table_size until it can finish this one-time run of the mass update.
If yes - you may want to work with your SAP basis guy and read note 13907. From your side, you may need to reduce the volume of this mass update. From the basis side, they need to determine a proper size for the enqueue table size.

Excel Web Access(An error has occurred.Please contact your system administrator if this problem persists. )

I'm using share point 2007 under windows server 2008 R2(one web server, another db server).When I publish a excel(*.xlsx) to report library or view it in web browser with the same error as bellows:
Excel Web Access
An error has occurred.
Please contact your system administrator if this problem persists.
Please kindly support to guide how to fix it with bellow information in details such as log.Many thanks!
1. The 12/logs file is as bellows:
10/10/2014 09:53:55.18 w3wp.exe (0x6528)                       0x5C08 Excel Services
Excel Calculation Services    2u7d Medium ExcelServerSharedWebApplication.Local: An exception was thrown by configdb infrastructure: System.InvalidOperationException: ExcelServerSharedWebApplication.Local: Could
not get ServerContext.Current, which indicates that either SharePoint or the SSP infrastructure isn't provisioned correctly or that we're running outside of a web context.     at Microsoft.Office.Excel.Server.ExcelServerSharedWebApplication.get_Local().
10/10/2014 09:53:55.18 w3wp.exe (0x6528)                       0x5C08 Excel Services
Excel Services Administration 8tqh Critical Excel Services: Unexpected exception while trying to access Shared Services Database;. Error = ExcelServerSharedWebApplication.Local: Could not get ServerContext.Current, which indicates that
either SharePoint or the SSP infrastructure isn't provisioned correctly or that we're running outside of a web context..
10/10/2014 09:53:55.18 w3wp.exe (0x6528)                       0x5C08 Excel Services
Excel Web Access              6nfi Unexpected InternalEwr.OpenWorkbook - An unexpected exception in the ECS Proxy occurred. Message: Microsoft.Office.Excel.Server.ExcelServerSettingException:
An error has occurred. ---> System.InvalidOperationException: ExcelServerSharedWebApplication.Local: Could not get ServerContext.Current, which indicates that either SharePoint or the SSP infrastructure isn't provisioned correctly or that we're running
outside of a web context.     at Microsoft.Office.Excel.Server.ExcelServerSharedWebApplication.get_Local()     --- End of inner exception stack trace ---     at Microsoft.Office.Excel.Server.ExcelServerSharedWebApplication.get_Local()
at Microsoft.Office.Excel.Server.ExcelServerSettings.get_Settings()     at Microsoft.Office.Excel.Server.ExcelServerSettings.get_EcsList()     at Microsoft.Office...
2.the event in event viewer is:
Log Name:      Security
Source:        Microsoft-Windows-Security-Auditing
Date:          2014/10/10 9:49:43
Event ID:      4625
Task Category: Logon
Level:         Information
Keywords:      Audit Failure
User:          N/A
Computer:      ***.net
Description:
An account failed to log on.
Subject:
Security ID:  NULL SID
Account Name:  -
Account Domain:  -
Logon ID:  0x0
Logon Type:   3
Account For Which Logon Failed:
Security ID:  NULL SID
Account Name:  ***
Account Domain:  ***
Failure Information:
Failure Reason:  An Error occured during Logon.
Status:   0xc000006d
Sub Status:  0x0
Process Information:
Caller Process ID: 0x0
Caller Process Name: -
Network Information:
Workstation Name: ***
Source Network Address: ***
Source Port:  63664
Detailed Authentication Information:
Logon Process:
Authentication Package: NTLM
Transited Services: -
Package Name (NTLM only): -
Key Length:  0
This event is generated when a logon request fails. It is generated on the computer where access was attempted.
The Subject fields indicate the account on the local system which requested the logon. This is most commonly a service such as the Server service, or a local process such as Winlogon.exe or Services.exe.
The Logon Type field indicates the kind of logon that was requested. The most common types are 2 (interactive) and 3 (network).
The Process Information fields indicate which account and process on the system requested the logon.
The Network Information fields indicate where a remote logon request originated. Workstation name is not always available and may be left blank in some cases.
The authentication information fields provide detailed information about this specific logon request.
- Transited services indicate which intermediate services have participated in this logon request.
- Package name indicates which sub-protocol was used among the NTLM protocols.
- Key length indicates the length of the generated session key. This will be 0 if no session key was requested.
Event Xml:
<Event xmlns="">
<System>
    <Provider Name="Microsoft-Windows-Security-Auditing" Guid="{54849625-5478-4994-A5BA-3E3B0328C30D}" />
    <EventID>4625</EventID>
    <Version>0</Version>
    <Level>0</Level>
    <Task>12544</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8010000000000000</Keywords>
    <TimeCreated SystemTime="2014-10-10T01:49:43.563436300Z" />
    <EventRecordID>37602685</EventRecordID>
    <Correlation />
    <Execution ProcessID="532" ThreadID="26096" />
    <Channel>Security</Channel>
    <Computer>***.net</Computer>
    <Security />
</System>
<EventData>
    <Data Name="SubjectUserSid">S-1-0-0</Data>
    <Data Name="SubjectUserName">-</Data>
    <Data Name="SubjectDomainName">-</Data>
    <Data Name="SubjectLogonId">0x0</Data>
    <Data Name="TargetUserSid">S-1-0-0</Data>
    <Data Name="TargetUserName">***</Data>
    <Data Name="TargetDomainName">***</Data>
    <Data Name="Status">0xc000006d</Data>
    <Data Name="FailureReason">%%2304</Data>
    <Data Name="SubStatus">0x0</Data>
    <Data Name="LogonType">3</Data>
    <Data Name="LogonProcessName">
    </Data>
    <Data Name="AuthenticationPackageName">NTLM</Data>
    <Data Name="WorkstationName">***</Data>
    <Data Name="TransmittedServices">-</Data>
    <Data Name="LmPackageName">-</Data>
    <Data Name="KeyLength">0</Data>
    <Data Name="ProcessId">0x0</Data>
    <Data Name="ProcessName">-</Data>
    <Data Name="IpAddress">***</Data>
    <Data Name="IpPort">63664</Data>
</EventData>
</Event>

Hi Tracy,
Have you changed something on your SharePoint 2007 environment recently before this issue occurred?
This issue may be related to Alternate Access Mappings settings like the following similar post, if you have configured AAM, you can check if this issue happened to some URLs, if it's the case, please add the problematic URLs as a Publish URLs for the default
zone for your web application, and also add these URLs as trusted locations, then check results again.
If above doesn't work, please enable ULS log on verbose level to get more useful log errors which time are corresponding to the errors occur.
https://social.technet.microsoft.com/Forums/en-US/c9ab4818-65c9-444d-be50-1bfed1f1509b/excel-web-access-web-part-works-on-intranet-but-not-internet?forum=sharepointgenerallegacy
http://blog.bugrapostaci.com/2011/09/08/how-to-enable-verbose-log-mode-on-moss-2007/
Thanks
Daniel Yang
TechNet Community Support

Business rule in MDS 2012 error: A database error has occurred. Contact your system administrator.

I get the following information in my MDS log as well as the above error message when I execute a business rule that has a condition of AND and an Action of Attribute must be unique in combination with 2 other attributes.
I'm running SQL Server 2012 11.0.3000
MDS database version 11.1.0.0
Any ideas?
MDS Error: 0 : SqlException message: A database error has occurred. Contact your system administrator.
at Microsoft.MasterDataServices.Core.DataAccess.DbHelper.HandleExceptions(Exception ex)
at Microsoft.MasterDataServices.Core.DataAccess.DbHelper.ExecuteDataSet(String spName, CloseConnectionBehavior closeBehavior, Object[] parameterValues)
at Microsoft.MasterDataServices.Core.DataAccess.MasterDataAccess.<>c__DisplayClass5.<ValidateEntityMembers>b__4()
at Microsoft.MasterDataServices.Core.DataAccess.DbHelper.ExecuteMethodWithDeadlockProtection(MethodDelegate method)
at Microsoft.MasterDataServices.Core.BusinessLogic.Validations.ValidateMembers(Int32 versionId, Identifier entityIdentifier, IList`1 memberIds, RequestContext context, OperationResult results)
at Microsoft.MasterDataServices.Core.BusinessLogic.Validations.Process(ValidationProcessCriteria criteria, Boolean commitVersion, Boolean validateEntityAsync, Boolean returnValidationResults, RequestContext context, OperationResult results)
SQL Error Debug Info: Number: 208, Message: Invalid object name 'cteDuplicates0a070e37b106b9e3efe35a455076efa7'., Server: SQLRS-01, Proc: udp_SYSTEM_3_38_CHILDATTRIBUTES_ProcessRules, Line: 230
SQL Error Debug Info: Number: 266, Message: Transaction count after EXECUTE indicates a mismatching number of BEGIN and COMMIT statements. Previous count = 0, current count = 1., Server: SQLRS-01, Proc: udp_SYSTEM_3_38_CHILDATTRIBUTES_ProcessRules, Line: 230
SQL Error Debug Info: Number: 266, Message: Transaction count after EXECUTE indicates a mismatching number of BEGIN and COMMIT statements. Previous count = 0, current count = 1., Server: SQLRS-01, Proc: , Line: 0
SQL Error Debug Info: Number: 266, Message: Transaction count after EXECUTE indicates a mismatching number of BEGIN and COMMIT statements. Previous count = 0, current count = 1., Server: SQLRS-01, Proc: udpBusinessRule_AttributeMemberController, Line: 0
SQL Error Debug Info: Number: 266, Message: Transaction count after EXECUTE indicates a mismatching number of BEGIN and COMMIT statements. Previous count = 0, current count = 1., Server: SQLRS-01, Proc: udpValidateMembers, Line: 0
DateTime=2013-08-15T13:25:15.6684023Z
MDS Error: 0 : <ArrayOfError xmlns="http://schemas.microsoft.com/sqlserver/masterdataservices/2009/09" xmlns:i="http://www.w3.org/2001/XMLSchema-instance">
<Error>
<Code>208</Code>
<Context i:nil="true" />
<Description>A database error has occurred. Contact your system administrator.</Description>
</Error>
</ArrayOfError>
DateTime=2013-08-15T13:25:15.7152026Z

OK I bit the bullet and contacted support on this one.
There is a known issue with MDS 2012 and business rules with a combination of "must be unique" attributes. If you do not list the attributes in the same order that they were created you will get the generic error I cited. At first they told me it must be
in the same order the attributes are in and that worked on one entity but not the other. The difference was that in the second entity I previously rearranged the attributes in question. Once I changed the order in the business rule to reflect the *original*
order it worked like a champ.
Hopefully this helps save someone some time and money.

Cannot connect to the phone system. An unidentified error has occurred, Please try again.

Issue: Lync 2013 users with remote call control enabled cannot connect to the phone system. When the user logs into Lync, they see an exclamation in the bottom right corner
with this error.
Error: Cannot connect to the phone system. An unidentified error has occurred, Please try again. If the problem continues, please contact your support team.
Environment:
1 site: Site1
2 Pools:
1. Lync 2010
Trusted application is added here for the site.
2. Lync 2013
Avaya phone system: AES r6-1-2-32-0
I have not moved the trusted application to the Lync 2013 pool yet, but my understanding is that it should still work since it’s in the site. Is my understanding on this correct? (All of my other trusted applications do work for Lync 2013
users & none of them have been moved yet. Remote Call Control is the only one that does not work.)
This is from the uccapi log. This is just from the user logging in, not actually making a call. Below are the items that I think are important, however, I don’t know how to interpret it to determine if the problem is on the Lync side or
the Avaya side. Here’s a summary:
SIP/2.0 100 Trying
Authentication-Info: TLS-DSK qop="auth", opaque="5FD217E1", srand="E05700E2", snum="9", rspauth="f308eae87c0bbe64a1ab213574776cbdf9823ab6", targetname="lync03.domain.com",
realm="SIP Communications Service", version=4
From: <sip:[email protected]>;tag=bbb282ebbd;epid=a86d5b0a29
To: <sip:[email protected]>
Call-ID: 9eb0d23a3b8f4e0eafc6c6da622fbecf
CSeq: 1 INVITE
Via: SIP/2.0/TLS 10.155.48.96:61472;ms-received-port=61472;ms-received-cid=1FA400
Server: http%3A%2F%2Fwww.microsoft.com%2FLCS%2FUdcAgent
Content-Length: 0
SIP/2.0 200 OK
Authentication-Info: TLS-DSK qop="auth", opaque="5FD217E1", srand="15C0F9A2", snum="13", rspauth="4fd891e39a33e902fb1cec5d980e5bf0ccb172a0", targetname="lync03.domain.com",
realm="SIP Communications Service", version=4
From: <sip:[email protected]
>;tag=bbb282ebbd;epid=a86d5b0a29
To: <sip:[email protected]
>;tag=A7A45C856ECD79121A1827265ABBD7F6
Call-ID: 9eb0d23a3b8f4e0eafc6c6da622fbecf
CSeq: 1 CANCEL
Via: SIP/2.0/TLS 10.155.48.96:61472;ms-received-port=61472;ms-received-cid=1FA400
Server: http%3A%2F%2Fwww.microsoft.com%2FLCS%2FUdcAgent
Content-Length: 0
SIP/2.0 487 Request terminated
Authentication-Info: TLS-DSK qop="auth", opaque="5FD217E1", srand="F46EC133", snum="14", rspauth="1d92718caa4f61d967faa46a5c256aafa8b4e740", targetname="lync03.domain.com",
realm="SIP Communications Service", version=4
From: <sip:[email protected]
>;tag=bbb282ebbd;epid=a86d5b0a29
To: <sip:[email protected]
>;tag=A7A45C856ECD79121A1827265ABBD7F6
Call-ID: 9eb0d23a3b8f4e0eafc6c6da622fbecf
CSeq: 1 INVITE
Via: SIP/2.0/TLS 10.155.48.96:61472;ms-received-port=61472;ms-received-cid=1FA400
ms-diagnostics: 5002;reason="Request was cancelled";AppUri="http%3A%2F%2Fwww.microsoft.com%2FLCS%2FUdcAgent";source="lync03.
domain.com"
Server: http%3A%2F%2Fwww.microsoft.com%2FLCS%2FUdcAgent
Content-Length: 0

Hi Suelizy,
To better understand the issue, I would like to collect the following information for troubleshooting:
1. Do you mean the Lync 2010 user can connect to the Phone System?
2. What’s next hop pool of the application?
In a mixed environment, you must set the next hop pool to be the Lync Server 2013 pool.
Best regards,
Eric

Not able to login PIA - An error has occurred. You may attempt to sign in again. If your attempt fails, please contact your System Administrator

One of the user is getting the below error when the person is trying to login ELM system. what could be issue for the specific user and how do we resolve this issue?
"Not able to login PIA - An error has occurred. You may attempt to sign in again. If your attempt fails, please contact your System Administrator"

Its works for other users, its only happened for one specific user only? I didn't check the APPSRV.LOG file? what needs to be checked in APPSRV.LOG, I can ask my infra team to check, because I don't have app server access to check log file.

An error has occurred while accessing SQL database or system resources. If this is the first time you have seen this message, please try again later. If this problem persists, please contact your administrator.

I have SP Server 2010, and when I try to DELETE a rule within an existing Audience, "Property (Account Name) = domain/username", I get this error, "An error has occurred while accessing SQL database or system resources. If this
is the first time you have seen this message, please try again later. If this
problem persists, please contact your administrator." When I try to "MODIFY" the rule I get this error, "One or more values typed on this page are not valid. Check the text for the indicated fields."
The last time I checked it was working, I'm not aware of any new updates installed recently? I did a full Profile Synchronization as well, but still not working, please advise? -- Evenstarline

Hi Sara,
First of all thank you very much for your prompt responses. Here are my comments to each of your suggestions below, and just to let you know I am using a Farm Admin account.  I
was able to do this way after we upgraded from SP 2007 to SP 2010 as well.   I would like to mention I'm not a SP expert, just been given the responsibility due to another person handling it just left, so apologize with some of
my novice questions below?
1. When I change the Operators to "Contains" or "Not Contains" get generates this error below.
     Error generating in red towards top of the audience page..."One or more values typed on this page are not valid. Check the text for the indicated fields."
     Error occurred where you enter your "Value"..."Could not resolve the user identity. Please re-enter the account name."
2. We have a 3-server-tier topology (SPWeb, SPDB, and SPFarm). Does the updates only apply to where the Central Admin is installed, which is the "SPFarm"? I checked all
3 servers, and NONE of the updates (KB2899494, KB2889845, and KB2883055) you'd mentioned are installed.
3. I'm new to IISRET, I need to be extra cautious of what I run in production, is this safe to run with no problem? What does it do? And How do I run it?
4. I'm also new to viewing the ULS log. I'd just downloaded a viewer for it. I'm assuming the only logs I need to be concern with viewing are within the SPAdmin (where Central
Admin is installed)? There's so many of them, what should I be looking for exactly?
Evenstarline

An error has occurred. Please try again, and if the problem persists, contact your help desk or system administrator. (Error 3000)

Hi,
When i open my Password Reset portal then provide Username credentials in text box and click on next then asked the Securites Question Answers to me,i provide the correct Answers to the securites Question after this password reset portal asked
me New Password and Confirm Password then click on next for resetting the password then gives below Error only for 2 Users. and all other users are working fine.
An error has occurred. Please try again, and if the problem persists, contact your help desk or system administrator. (Error 3000:)
Regards
Anil Kumar

Anything in the event log?

An unexpected error has occurred. Please contact your system administrator

Hi All,
I have created one transaction in AR and i am trying to apply a credit transaction against this transaction in transaction work bench i am getting following error.
Error:
An unexpected error has occurred. Please contact your system administrator.
we are using R12.1.3 version.
Please help us.
Regards,
Raju.G

Hi Raju,
Please check for any errors in the DB and Application log file and post them here.
Also refer notes:
Transactions Workbench: Credit a Transactions Ends in Error: An Unexpected Error Has Occurred. Please Contact Your System Administrator (Doc ID 1552365.1)
Troubleshooting Credit Memos in the Transaction Workbench and AutoInvoice in Receivables (Doc ID 1110573.1)
Transactions Workbench Error: Listing of FRM Errors (Doc ID 1321612.1)
Thanks &
Best Regards ,

Getting an error while configuring VMM for System Center 2012. error - An internal error has occurred trying to contact an agent on the WIN-NTJU8CNU server: : . Ensure the agent is installed and running.

Hi,
I am trying to install "System Center 2012 - Virtual Machine Manager by Using a Pre-Configured VHD".
I downloaded install guide & the binaries from http://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=10712
I have followed the installation document & getting an error while configuring VMM for System Center 2012.
error details from log file given below:
01:12:24:VMMPostinstallProcessor threw an exception: Threw Exception.Type: Microsoft.Carmine.WSManWrappers.WSManProviderException, Exception.Message: An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
01:12:24:StackTrace:   at Microsoft.Carmine.WSManWrappers.ErrorContextParameterHelper.ThrowTranslatedCarmineException(WsmanSoapFault fault, COMException ce)
   at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.RetrieveUnderlyingWMIErrorAndThrow(SessionCacheElement sessionElement, COMException ce)
   at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
   at Microsoft.Carmine.WSManWrappers.AgentManagement.AssociateLibrary(WsmanAPIWrapper wsmanObject, String CertificateSubjectName, String& ExportedCertificate, ErrorInfo& ErrorInfo)
   at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateAgentServer(String fullyQualifiedServerName)
   at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.AssociateDefaultLibraryServer()
   at Microsoft.VirtualManager.Setup.VirtualMachineManagerHelpers.SetupLibraryShare()
   at Microsoft.VirtualManager.Setup.InstallItemCustomDelegates.PangaeaServerPostinstallProcessor()
01:12:24:InnerException.Type: System.Runtime.InteropServices.COMException, InnerException.Message: There is a time and/or date difference between the client and server.
01:12:24:InnerException.StackTrace:   at WSManAutomation.IWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
   at Microsoft.Carmine.WSManWrappers.MyIWSManSession.Invoke(String actionUri, Object resourceUri, String parameters, Int32 flags)
   at Microsoft.Carmine.WSManWrappers.WsmanAPIWrapper.Invoke(String actionUri, WSManUri targetUri, Hashtable parameters, Type returnType, Boolean isCarmineMethod, Boolean forceResponseCast)
01:12:24:ProcessInstalls: Running the PostProcessDelegate returned false.
01:12:24:ProcessInstalls: Running the PostProcessDelegate for PangaeaServer failed.... This is a fatal item. Setting rollback.
01:12:24:SetProgressScreen: FinishMinorStep.
01:12:24:ProcessInstalls: Rollback is set and we are not doing an uninstall so we will stop processing installs
I have completed MSSQL server configuration and while configuring VMM the below error displayed in the wizard:
An internal error has occurred trying to contact an agent on the WIN-NTJTNEJ1UCN.mydomain.com server: : .
Ensure the agent is installed and running. Ensure the WS-Management service is installed and running, then restart the agent.
I have checked that the following services are running:
1) Verified WS-Management srvice 2) MSSQL server + MSSQL (agent) 3)SC VM Manager Agent 4) Windows management instrumentation .
I have joined the VM (on which installing SC VMM) in a domain(as per install guide) and installing VMM using domain account & it is in local Administrators group.
Also I would like know if there is any stand alone SC VMM installer. If yes then please let me know the installer location & install guide.
thanks.
====

Have you installed AppController on the same machine with VMM?

PS CS5 The operation could not be completed. A file system I/O error has occurred

Howdy...
I'm using Photoshop CS5 and when I go to use a handful of filters such as Liquify or Lens Correction I am suddenly getting an error message saying:
"The operation could not be completed. A file system I/O error has occurred"
Doesn't matter if it's a massive file or a small one. Sometimes the Liquify box will actually come up, but after I make one or two strokes, the beachball comes up and moments later I get the error message again. It doesn't actually crash PS, it just prevents me from using those filters. Each time I click, the error message comes up again. I've also tried it with my PS CS3 on the same Mac and it does the same thing. However on my 4 year old MacBook Pro, it's absolutely fine. Grrrrr!
I have my PS set as default on 64 bit. I have a scratch disk with nearly 500gb free (which is not my start-up disk) I am running a Mac Pro 2.8 GHz 8 Core Intel with 16gb of ram, so it's not a memory problem. Running Mac OS 10.6.7 but did the same on 10.6.6 too.
I have repaired the disk permissions on the start-up disk. I have reloaded a fresh copy of PS (a few times). Even did a hard Un-install with maccs3clean after trying a regular Un-install with no success.
I had an 1.5hr conversation with an Adobe Tech guy earlier today and he's scratching his head, so I'd thought I'd throw it open to you guys hoping someone has had the same problem and can save the rest of my hair from being pulled out.
HELP!

Hi Guys,
I know this is an old post but I need to bump it.
I work for a image processing company and we all sit on top spec mac pro's with 16-32 GB of RAM, top graphic cards and SSD drives.
All of my collegaues' computers are working fine when it comes to using liquify and all of the filters that come with CS5, but it sure doesn't work on my mac at all.
We have a tech guy who has re-installed the OSX on a new SSD drive now two times and we have started from scratch with installing CS5 but it still will not work. I keep getting "the operation could not be completed..." every time i try
to liquify or do any other filter work.
I am 100% sure it doesn't have to do with any disk permissions or broken drives in my case.
Could there be an issue with the graphic card or any other hardware component since it's clearly not a software related issue?
Any help would be much appreciated because we are very much in the dark here.
Best regards,
Anders

System error 5 has occured

Similar Messages

Maybe you are looking for