System error: Error when copying parameter function group CR01

Dear friends
I am getting the above error while doing the Backflushing in REM.
It occurs when backflushed quantity is issued ,and while confirming the
ACTUAL ACTIVITES above error occurs..........
We have upgrade the system from SAP 4.7 to ECC6.0.
It is giving some error in CRM system but we don't have CRM system.......
Message displayed is as below..................
System error: Error when copying parameter function group CR01
     Message no. CR085
Diagnosis
     Internal error.
Procedure
     Repeat the transaction.
     If the error occurs and you have a CRM System connected to your ERP
     System, the document may have been archived in the CRM System.
     If the error occurs again, inform your system administrator. If the
     error cannot be corrected, call the SAP Hotline directly. Describe which
     steps preceeded the error.
Thanks& Regards
Sandeep
Message was edited by:
        Sandeep Bhowmick

Hi Sandeep
Standard R/3 does not allow backflush without any operation. You need to have an operation to do a backflush.Error message CR 085 is issued because there is no operation in the routing of the material backflushed. System should issue an error when no operations are found in routing. Although, error message CR 085 is not correct, more appropriate message RM 824 for this a program correction is requried check note (691161).
Regards
Prasad
Reward if useful

Similar Messages

  • Error message when copying a music file from PC to BB

    I get the following error message when copying a music file. Also I cannot delete any files.
    "Cannot copy. The request could not be performed because of an I/O device error."

    Hello lcoyote and welcome to the BlackBerry Support Community Forums.
    Do you get the error on all media files or just one in particular? From where are you trying to delete files?
    Is your media card formatted? 
    If you aren't able to add/remove media, try formatting the card as shown in KB10527
    If you currently have photos on the card, try to move them to the computer first as formatting the card will delete all data.
    Let me know how you make out
    Thanks!
    -HMthePirate
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Error message when copying from Acrobat Reader

    Error message when copying from Acrobat Reader - any file,  any time (Win 7, Adobe many versions until recent).
    Copy works, but causes a needless and useless error message that has to be clicked away every time.
    This problem is published on the web for a million times without a working solution. And even in the Adobe forum no qualified answer (http://forums.adobe.com/thread/441370)
    When can I expect a solution?

    "101 Views     0 Replies  
    Was this helpful?" 
    Of course not.
    But thank you anyway, I talked to my admin and we changed the whole company to Foxit.
    It can be that easy.

  • I am trying to generate purchase order and i create a BAPI also which is active. But when i call the BAPI from SYbase Mobile Object RFC then after calling it gives an Error "Conflict when calling a Function Module (Field Length)".

    i am trying to generate purchase order and i create a BAPI also which is active.
    But when i call the BAPI from SYbase Mobile Object RFC then after calling it gives an Error "Conflict when calling a Function Module (Field Length)".

    Hi,
    Yeah i tried my Z_BAPI in R3 and then giving some ERROR.
    This is my CODE-
    FUNCTION ZBAPIPOTV2.
    *"*"Local Interface:
    *"  IMPORTING
    *"     VALUE(POHD) TYPE  ZPOHD OPTIONAL
    *"     VALUE(POITEM) TYPE  ZPOITEM OPTIONAL
    *"  TABLES
    *"      RETURN STRUCTURE  BAPIRET1 OPTIONAL
    data: ls_pohd type bapimepoheader,
             ls_pohdx TYPE bapimepoheaderx,
             lt_poit TYPE TABLE OF bapimepoitem,
             lt_poitx TYPE TABLE OF bapimepoitemx,
             ls_poit TYPE bapimepoitem,
             ls_poitx TYPE bapimepoitemx.
       MOVE-CORRESPONDING pohd to ls_pohd.
       MOVE-CORRESPONDING poitem to ls_poit.
       ls_pohdx-comp_code = 'x'.
       ls_pohdx-doc_type = 'x'.
       ls_pohdx-vendor = 'x'.
       ls_pohdx-purch_org = 'x'.
       ls_pohdx-pur_group = 'x'.
       ls_poit-po_item = '00010'.
       APPEND ls_poit to lt_poit.
       ls_poitx-po_item = '00010'.
       ls_poitx-po_itemx = 'x'.
       ls_poitx-material = 'x'.
       ls_poitx-plant = 'x'.
       ls_poitx-quantity = 'x'.
       APPEND ls_poitx to lt_poitx.
    CALL FUNCTION 'BAPI_PO_CREATE1'
       EXPORTING
         POHEADER                     = ls_pohd
        POHEADERX                    =  ls_pohdx
    *   POADDRVENDOR                 =
    *   TESTRUN                      =
    *   MEMORY_UNCOMPLETE            =
    *   MEMORY_COMPLETE              =
    *   POEXPIMPHEADER               =
    *   POEXPIMPHEADERX              =
    *   VERSIONS                     =
    *   NO_MESSAGING                 =
    *   NO_MESSAGE_REQ               =
    *   NO_AUTHORITY                 =
    *   NO_PRICE_FROM_PO             =
    *   PARK_COMPLETE                =
    *   PARK_UNCOMPLETE              =
    * IMPORTING
    *   EXPPURCHASEORDER             =
    *   EXPHEADER                    =
    *   EXPPOEXPIMPHEADER            =
      TABLES
        RETURN                       = return
        POITEM                       = lt_poit
        POITEMX                      = lt_poitx
    *   POADDRDELIVERY               =
    *   POSCHEDULE                   =
    *   POSCHEDULEX                  =
    *   POACCOUNT                    =
    *   POACCOUNTPROFITSEGMENT       =
    *   POACCOUNTX                   =
    *   POCONDHEADER                 =
    *   POCONDHEADERX                =
    *   POCOND                       =
    *   POCONDX                      =
    *   POLIMITS                     =
    *   POCONTRACTLIMITS             =
    *   POSERVICES                   =
    *   POSRVACCESSVALUES            =
    *   POSERVICESTEXT               =
    *   EXTENSIONIN                  =
    *   EXTENSIONOUT                 =
    *   POEXPIMPITEM                 =
    *   POEXPIMPITEMX                =
    *   POTEXTHEADER                 =
    *   POTEXTITEM                   =
    *   ALLVERSIONS                  =
    *   POPARTNER                    =
    *   POCOMPONENTS                 =
    *   POCOMPONENTSX                =
    *   POSHIPPING                   =
    *   POSHIPPINGX                  =
    *   POSHIPPINGEXP                =
    *   SERIALNUMBER                 =
    *   SERIALNUMBERX                =
    *   INVPLANHEADER                =
    *   INVPLANHEADERX               =
    *   INVPLANITEM                  =
    *   INVPLANITEMX                 =
    ENDFUNCTION.
    i am trying to generate purchase order and i create a BAPI also which is active. But when i call the BAPI from SYbase Mobile Object RFC then after calling it gives an Error "Conflict when calling a Function Module (Field Length)". 

  • How to copy the function group

    hi there,
    i want to copy the function group 2012. plz let me know the possibility.

    use FM <b>RS_FUNCTION_POOL_COPY</b>  to copy
    Look at this thread
    how to copy the function group

  • Copy of Function Group SETB giving error

    Dear All,
    I tried to copy the standard function Group SETB to ZSETB(Which is having SE16 transaction attached) but during activation the include is giving error as "The Field TABNAME is unknown". I have just copied the entire functional group along with function modules. No clue how I can avoid the error. I deleted the include LSETBF10 and re-copied, but error is persisting. Do you have any clue???
    Thanks and regards,
    AD

    Hi!
    Thanks for all your valuable reply. I could avoid the error but could not avoid another error: "The parameter INTTAB of the Global interface has already been defined outside the function". While double clicking on the error, I have reached to a hidden include (Not possible to browse through Navigtion) LZSETB$07. The include contains the following code:
      THIS FILE IS GENERATED BY THE FUNCTION LIBRARY.               *
      NEVER CHANGE IT MANUALLY, PLEASE!                             *
    FUNCTION $$UNIT$$ ZRS_TABLE_VIEW
             IMPORTING
                   VALUE(TABNAME) LIKE !DATABROWSE-TABLENAME
               DEFAULT 'TFDIR'
             TABLES
                   !FIELDTAB STRUCTURE !X031L OPTIONAL
                   !INTTAB
             EXCEPTIONS
                   !CANCELD
                   !GENERATION_ERROR
             $$GLOBAL.
    I assume that is a system generated include. The Global option in FM has automatically been copied during copy of the function group and the function module.
    Thanks and regards,
    AD

  • Copying a function group gives error

    Dear All,
    I am copying a function a group JV05. I have copied evrything i.e all the includes, TOP etc. But when i activate the group it gives me error. What could be the problem? I have tried to activate the includes & TOP individually. Still it gives error for some variables. Please help me out.
    Thanks in advance!
    Regards,
    Prasad

    hi ,
    **Go to se80..**
    **1. Select function group**
    **2. Enter JV05 as name  "-----> click on spectacles button.**
    **3. Right click on JV05**
    **4. Select copy  "--------> give a Zfunction group name**
    **5. "Copy all the function modules in this function group with zfunctionmodules.**
    **6. Save & Activate.**
    Regards,

  • Run-time Error '429' when copying queries from one userid to a new userid

    Hello,
    One of the users is having an issue when copying queries from an old user id to a new user id.
    She is getting the visual basic run-time error '429' - active x component can't create object while copying.
    This is not consistent.  From what I can tell, this does not appear to be a bex query designer issue but something in microsoft.
    Please let me know either way. I have found minimal posts on this issue.  Most that I have found are outside the sdn forum and talk about registry issues?
    Thank you,
    Lynda

    According to your error message, your onClick function declaration line closes the parenthesis twice... you may have a typo in what you actually put in the file versus what you think you put...
    function onClick()event:MouseEvent):void{

  • Error Message when logging on "The Group Policy Client service failed the logon. Access is denied"

    Since the move to Windows 7 we have started getting this error above when people login at random times and on random machines, at first we thought it was only a select few users, but now it seems to have occurred to about 20 different Staff members working
    at the school. Also of those 20 odd users it has happened to them on a few occasions.
    What we know
    We know this problem is only occurring to staff with Roaming Profiles, it seems like somehow the profile is not Synchronizing with the Servers File Share that houses the profiles, which causes the NTUSER.DAT file to become corrupt and go from being around
    2 – 3 MBs to 256KB (In all cases where a user has had this issue there NTUSER.DAT file has been 256KB)
    Current Resolution to the problem
    When a staff member contact us with this problem, we fortunately have Previous Versions working on the profiles folder on the server, so we are able to restore their NTUSER.DAT file from 1 to 2 days before it became corrupt, which then seems to allow them
    to log on fine
    What we have tried so far & suggested so far
    After some research on Google, we found the following thread on EduGeek
    http://www.edugeek.net/forums/windows-7/78733-windows-7-user-profile-failed-error-again.html#post700415
    Which suggested that the problem may lay within registry, so we implemented the Script that was posted on the website, however this has not seemed to make any difference
    In the early stages when only 5 – 10 staff seemed to be having the problem, we believed the issue could be with just certain AD accounts. It had not seemed to happen to any recently created AD accounts so we thought it could be a corrupt attribute on
    the user so we delete one of the staff AD accounts that had the problem and creating a brand new one, however within about 2 – 3 weeks that staff member had the issue occur again
    Leading on from point two, we also thought the problem could be with people using multiple computers, logging on in 2 places and not logging off properly, but unfortunately the staff member referred to in point 2 only uses the one computer in reception.
    Another potential cause that we figured might be the route of the problem, was it could be specific computers that are not communicating properly with the server, which could be causing this problem to occur, but we have no real way of testing this,
    as the staff generally log onto 3 – 4 different computers throughout the day and in different location
    We log a call with EE and they just pointed us to various websites that we had already checked and wasn’t much help.
    In Summary
    This error has now occurred with about 20 members of staff, we currently only use Windows 7 at our Senior School & Moving to Windows 7 at our Prep School in the Summer
    holidays, we would like to find out the route of this problem ideally before then, as we could potentially be doubling the amount of staff with the problem after the move. Has anyone else seen this problem or have a brain wave on how to solve it?
    Regards
    Andy

    Hi Dudleya,
    First of all ,I would suggest to check the permissions of the NTUSER.DAT registry hive .Here is a link for reference :
    The Group Policy Client service failed the logon. Access is denied(Juke Chou`s answer)
    https://social.technet.microsoft.com/Forums/windows/en-US/8c0054a3-35be-4fc4-839c-e2176613eb23/the-group-policy-client-service-failed-the-logon-access-is-denied?forum=w7itpronetworking
    Please refer to this link and add the registry keys to have a check .Please backup the registry keys before you made modifications to them.
    The Group Policy Client Service Failed The Logon In Windows 8(It should also work on windows 7 )
    http://www.thewindowsclub.com/fix-group-policy-client-service-failed-logon-windows-8
    If the issue persists ,we can refer to this link to troubleshoot this issue .
    Troubleshoot User Profiles with Events(It should also be applied to windows 7 )
    https://technet.microsoft.com/en-us/library/jj649075.aspx
    NOTE: This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites.
    Best regards

  • Error Message when copying music files to Nano

    When copying an album to the Nano, I receive and error message with 4 songs left to copy off of the album. Error states: Attempting to copy to the disk "IPOD" failed. The disk could not be read from or written to. With 4 songs left to copy
    I have only used approx. 344.8 MB of memory. I tried resetting the Nano and then also deleting album and recopying and the same files back. Nothing seems to work, please help!

    If you want to use large files you have to reformat it. It will erase any data that is on the drive, If the drive will be used only with OSX, format it as Mac Extended (HFS+) Journaled with the GUID partition table.
    Start Disk Utility (Utilities Folder). Select the drive in the left column (be sure to select the drive, all the way at the left, not the volume indented below it). Select the "Partition" tab. Set "Volume Scheme" to "1 Partition". Click the "Options" button. Select "GUID Partition Table". Click the "OK" button. Enter the volume name and click the "Apply" button.

  • Error message when copying .mov files

    Hello,
    I'm trying to copy .mov files to back up from my desktop and from an external hardrive (250gb) to a new external hardrive (350gb) but each time I am getting the an error message saying the operation can not be completed due to unexpected error (error code 0). The files i am trying to copy are between 7gb and 20gb. Does anyone what what the error message means or how I can get around it please?!
    Thanks!

    If you want to use large files you have to reformat it. It will erase any data that is on the drive, If the drive will be used only with OSX, format it as Mac Extended (HFS+) Journaled with the GUID partition table.
    Start Disk Utility (Utilities Folder). Select the drive in the left column (be sure to select the drive, all the way at the left, not the volume indented below it). Select the "Partition" tab. Set "Volume Scheme" to "1 Partition". Click the "Options" button. Select "GUID Partition Table". Click the "OK" button. Enter the volume name and click the "Apply" button.

  • Error message when copying

    Every time I try to copy text from a pdf document, I get the same error message "Cannot copy to clipboard. Internal error". Any ideas? I got the same message in Version 10, but re-installed and had no problem. Upgraded to XI and now it is back again. Must I downgrade again to be able to copy?

    Hello lcoyote and welcome to the BlackBerry Support Community Forums.
    Do you get the error on all media files or just one in particular? From where are you trying to delete files?
    Is your media card formatted? 
    If you aren't able to add/remove media, try formatting the card as shown in KB10527
    If you currently have photos on the card, try to move them to the computer first as formatting the card will delete all data.
    Let me know how you make out
    Thanks!
    -HMthePirate
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Copying of function group

    Hi all,
    Please help me in this issue.
    when i copy function group , i am ablw to copy the function modules but i am not able to copy the Inlcudes in the function group
    can anyone please explain how can i copy the includes also
    Thnaks in Advance
    K reddy

    Hi k reddy,
    it may depend on the release you use. I remember it was not that easy in the past as already described.
    Note that copying functions as well as includes you always need new names for copied objects.
    Now, if it is not too much work: Go to main program, see the INLUDE statements for the 'old' function groups includes. Change to new names and copy the includes manually to new name.
    Next time it may work.
    Or delete new function gropu and start all over again.
    Note: If any inluce includes other include statements: Those inludes you must copy and rename manually (if changes are required).
    Regards,
    Clemens

  • Copying the function group CHVW

    Hello friends,
    I am trying to copy the fucntion group ( CHVW) to Z-Function group but I am unable to copy the SAP is
    showing the message LCHVWTOP is inactive, if I see LCHVWTOP is active in Standard Function group.
    Thanks in Advance.
    Ravi Yasoda

    Hi Adnan;
    Are you sure you haven't dont release second or more requests for FG?
    If you have more requests, your FG may hasn't be last FM list.
    Yo can check  below include in SAPLZ<FG> function pool.
      INCLUDE LZ<FG>UXX.                       " Function Modules
    Are you seeing last FM list?
    Best regards.

  • Unknown error -69 when copying music to I-tunes

    Does anyone know what Unknown error -69 is? I have searched the net and can't seem to see threads for this error.
    I have a 30GB Ipod; I can only copy about 6GB. Initially I was getting an error about bad sectors were found so I done a chkdsk on the disk and it found system errors and says it fixed them. So when I go to copy I just get this error. Now I have restored/reset a couple of times; I have been using my ipod like this for a while now but want to see if there is a way around fixing this before I have to get a new one.
    Any help greatly appreciated.
    Cheers

    To be of any assistance,
    Which version of iTunes are you using?
    What is your iPod firmware/software version as shown in the iTunes summary page?
    Error -69 occurs when iTunes tries to send files to your iPod, but a file (or files) is unusable, if you have error 50 this time also then it is the iTunes needs to be re-install. And your iPod firmware need to be updated.
    I can suggest you delete the file that is causing the problem, but most likely it is all the files, due to the iPod firmware or iTunes mobile device driver is somehow corrupted, due to a partially aborted installation, or Restore.
    So try this.
    Can you do a Hard Reset  as below
    After charging till full charge, at least 2 hours (preferably 4 hours)
    Toggle the Hold switch, make sure you dont see the red mark when you do the  next step
    Reset the iPod -> Press Menu and Center button simultaneously for about 10 secs till the Apple Logo comes ON
    Then release the buttons
    Select your preferred language.
    Here is the Apple support Article on the 5Rs
    http://www.apple.com/support/ipod/five_rs/classic/
    Then Re-install your iTunes
    Put the iPod in Disk Mode
    http://support.apple.com/kb/HT1363?viewlocale=en_US
    Connect the iPod to a High Power USB 2.0 port at the back of your PC, and never use the USB Hub.
    Disconnect all other USB devices, except the mouse and keyboard.
    Select the iPod in the Device pane of iTunes, and click Check for Updates
    If it says "Software is uptodate", Press Restore just the same, although this will erase your iPod.
    Good Luck!

Maybe you are looking for