System Hangs after adding Storage :(

First dont jump on me for mentioning a 4800 this is storage related.
Solaris 8
Brocade 3850(SUN Branded)
SUN Samfs(4.2.8, running 5 months)
EMC Clarion(Old existing and always seen in config)
Infortend FC-SATA array(Newly added)
I have added some FC-SATA drives to my 4800s. The process of adding these drives was done by a 'cfgadm -c configure <Controller #>'. Following this the disks are seen, striped and shared with SAMFS. All is good at this point.
During reboot the systems hangs just after the boot message of "System is coming up". I think it is at the point of finding mount points and doing an 'fsck', but the system never completes(+45 minutes).
When I drop back to the original configuration prior to the 'cfgadm' the system then boots just fine, but I then need to do 'cfgadm -c .....' to see the drives and mount my SAMFS partitions.
Any ideas?

SimonM
The disks can be seen when I attach the storage with a 'cfgadm -c configure <controller #>' and the system up and running. After dynamicly attaching the storage I can create filesystems, use SAMFS to share the filesystem out, and all is good across all machines.
I only have an issue later in life when a reboot(hate for a panic) occurs. Some sunsolve/goggle'ing found some old document that were very dated that pointed to the path_to_inst and fiber not playing well.
I am not 100% sure that the system has hit the mount/fsck processes or not but it is the next sequence in the boot process. I know it is storage/config related because (1) adding the new disks is the only thing that changed on the system, (2) returning the OS back to its original configuration before the disks being added allows everything to boot fine. I was just looking for some pointer of where to begin troubleshooting.
I will keep everyone updated. Like I said I only get a couple of hours every month if I am lucky.

Similar Messages

ADF application hangs after $$added root$$ message in the logs

Hi ADF Gurus,
We have an ADF application which freezes after we create a row in a particular VO,
When debugged in Jdev, the application seems to hang when either of the below log messages appear. Does anybody know what these messages mean? Just hoping for some hint as to where the problem might lie. The table where the new row is added has about 150,000 records in it
Log messages:
<PCollNode> <checkForSplit> [50545] $$added root$$ id=-2
<PCollNode> <checkForSplit> [50546] $$added root$$ id=-73
<PCollNode> <checkForSplit> [50636] $$added root$$ id=-2559
Environment details:
Jdev: 11.1.1.5.0
Database:11g
Thanks
-Venkat

duplicate post: ADF application hangs after $$added root$$ message in the logs

Weblogic 11g hangs after adding -Xmanagement start parameter

Hi.
I've got very strange problem with Weblogic 11g.
After adding to startup parameter:
-Xmanagement:port=3107,authenticate=false,ssl=false
server hangs during start.
<May 2, 2012 2:45:19 PM> <INFO> <NodeManager> <Server output log file is '/u01/app/Oracle/Middleware/user_projects/domains/jmsZycie/servers/srv1/logs/srv1.out
'>
JAVA Memory arguments: -Xms512m -Xmx512m
WLS Start Mode=Production
CLASSPATH=/u01/app/Oracle/Middleware/patch_wls1036/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/u01/app/Oracle/Middleware/jrockit-jdk1.6.0_29-R
28.2.2-4.1.0/lib/tools.jar:/u01/app/Oracle/Middleware/wlserver_10.3/server/lib/weblogic_sp.jar:/u01/app/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.ja
r:/u01/app/Oracle/Middleware/modules/features/weblogic.server.modules_10.3.6.0.jar:/u01/app/Oracle/Middleware/wlserver_10.3/server/lib/webservices.jar:/u01/ap
p/Oracle/Middleware/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/u01/app/Oracle/Middleware/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar:/u01/a
pp/Oracle/Middleware/wlserver_10.3/common/derby/lib/derbyclient.jar:/u01/app/Oracle/Middleware/wlserver_10.3/server/lib/xqrl.jar:/u01/app/Oracle/Middleware/pa
tch_wls1036/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/u01/app/Oracle/Middleware/jrockit-jdk1.6.0_29-R28.2.2-4.1.0/lib/tools.jar:/u01/app/Ora
cle/Middleware/wlserver_10.3/server/lib/weblogic_sp.jar:/u01/app/Oracle/Middleware/wlserver_10.3/server/lib/weblogic.jar:/u01/app/Oracle/Middleware/modules/fe
atures/weblogic.server.modules_10.3.6.0.jar:/u01/app/Oracle/Middleware/wlserver_10.3/server/lib/webservices.jar:/u01/app/Oracle/Middleware/modules/org.apache.
ant_1.7.1/lib/ant-all.jar:/u01/app/Oracle/Middleware/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar::/u01/app/Oracle/Middleware
PATH=/u01/app/Oracle/Middleware/wlserver_10.3/server/bin:/u01/app/Oracle/Middleware/modules/org.apache.ant_1.7.1/bin:/u01/app/Oracle/Middleware/jrockit-jdk1.6
.0_29-R28.2.2-4.1.0/jre/bin:/u01/app/Oracle/Middleware/jrockit-jdk1.6.0_29-R28.2.2-4.1.0/bin:/u01/app/Oracle/Middleware/wlserver_10.3/server/bin:/u01/app/Orac
le/Middleware/modules/org.apache.ant_1.7.1/bin:/u01/app/Oracle/Middleware/jrockit-jdk1.6.0_29-R28.2.2-4.1.0/jre/bin:/u01/app/Oracle/Middleware/jrockit-jdk1.6.
0_29-R28.2.2-4.1.0/bin:/usr/kerberos/sbin:/usr/kerberos/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http://hostname:port/console *
starting weblogic with Java version:
java version "1.6.0_29"
Java(TM) SE Runtime Environment (build 1.6.0_29-b11)
Oracle JRockit(R) (build R28.2.2-7-148152-1.6.0_29-20111221-2104-linux-x86_64, compiled mode)
Starting WLS with line:
/u01/app/Oracle/Middleware/jrockit-jdk1.6.0_29-R28.2.2-4.1.0/bin/java -jrockit -Xms512m -Xmx512m -Dweblogic.Name=srv1 -Djava.security.policy=/u01/app/Oracle
/Middleware/wlserver_10.3/server/lib/weblogic.policy -Dweblogic.ProductionModeEnabled=true -Dweblogic.system.BootIdentityFile=/u01/app/Oracle/Middleware/user
_projects/domains/jmsZycie/servers/srv1/data/nodemanager/boot.properties -Dweblogic.nodemanager.ServiceEnabled=true -Dweblogic.security.SSL.ignoreHostnameVeri
fication=false -Dweblogic.ReverseDNSAllowed=false -Xms2048m -Xmx2048m -Xnohup -Xverbose:gcpause,gcreport,memory -Xverify=none -Xmanagement:port=3107,authentic
ate=false,ssl=false -Xss:512k -Xdebug -da -Dplatform.home=/u01/app/Oracle/Middleware/wlserver_10.3 -Dwls.home=/u01/app/Oracle/Middleware/wlserver_10.3/server
-Dweblogic.home=/u01/app/Oracle/Middleware/wlserver_10.3/server -Dweblogic.management.discover=false -Dweblogic.management.server=http://10.2.124.194:7080
-Dwlw.iterativeDev=false -Dwlw.testConsole=false -Dwlw.logErrorsToConsole=false -Dweblogic.ext.dirs=/u01/app/Oracle/Middleware/patch_wls1036/profiles/default
/sysext_manifest_classpath weblogic.Server
[INFO ][memory ] Running with 32 bit heap and compressed references.
[INFO ][memory ] GC mode: Garbage collection optimized for throughput, strategy: Generational Parallel Mark & Sweep.
[INFO ][memory ] Heap size: 2097152KB, maximal heap size: 2097152KB, nursery size: 1048576KB.
[INFO ][memory ] <start>-<end>: <type> <before>KB-><after>KB (<heap>KB), <time> ms, sum of pauses <pause> ms.
[INFO ][memory ] <start> - start time of collection (seconds since jvm start).
[INFO ][memory ] <type> - OC (old collection) or YC (young collection).
[INFO ][memory ] <end> - end time of collection (seconds since jvm start).
[INFO ][memory ] <before> - memory used by objects before collection (KB).
[INFO ][memory ] <after> - memory used by objects after collection (KB).
[INFO ][memory ] <heap> - size of heap after collection (KB).
[INFO ][memory ] <time> - total time of collection (milliseconds).
[INFO ][memory ] <pause> - total sum of pauses during collection (milliseconds).
[INFO ][memory ] Run with -Xverbose:gcpause to see individual phases.
[INFO ][mgmnt ] Remote JMX connector started at address poc1:3107
[INFO ][mgmnt ] Local JMX connector started
<May 2, 2012 2:45:22 PM CEST> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable th
is check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<May 2, 2012 2:45:23 PM CEST> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disab
le this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<May 2, 2012 2:45:24 PM CEST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Oracle JRockit(R) Version R28.2.2-7-148152-1.6.0_29-20111221
-2104-linux-x86_64 from Oracle Corporation>
<May 2, 2012 2:45:26 PM CEST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.6.0 Tue Nov 15 08:52:36 PST 2011 1441050 >
<May 2, 2012 2:45:29 PM CEST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<May 2, 2012 2:45:29 PM CEST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
And this is it.
I am able to connetct from JRMC. After removing -Xmanagement all is working.

Can you please take a thread dump and copy paste the stack trace for the Thread called "main" thread.
Please take atleast 3 thread dumps with an interval of 10 seconds and paste the "main" thread stack trace from all the 3 thread dumps.
After analyzing the stack trace we might be able to determine where it is hanging and thus giving us a clue where the issue could be.
Arun

Lion 10.7.1 system hangs after reboot

Strange, I have just updated to 10.7.1 (via SW update) on my Macbook Pro and now the system does not boot. It restarted and now hangs since minutes with the spinning wheel on a grey screen. Anyone experienced this, too? Any solutions?
Thanks a lot.
Tom

http://jrause.com/blog/?p=165http://jrause.com/blog/?p=165
bighugewhaledork wrote:
Regarding the occasional system hang on reboot people are experiencing. I have two troubleshooting suggestions to help you get to the login screen, but aren't solutions to the problem of whatever is causing the system hang. 1) I find my hangs are usually solved by removing my USB devices from the 2 USB ports (via USB hubs) and rebooting. 2) Furthermore, if I boot into verbose mode (holding command+v right before the chime) (sometimes after removing the USB devices, sometimes not), that usually helps the boot process along, either due to just chance (I don't know why booting into verbose mode would help it surmount the initial hang, but it seems to work sometimes) or some other reason.
Good luck.
Yeah that better be one big fat good luck there, because that advice is not going to help anyone that is having this problem. Not one little bit. Some kind of magic that Verbose Mode casts will fix it? Uh, no. That would be a figment of your over-eager imagination, Verbose Mode doesn't change anythig. Oh and by the way, in order to get to this stage in the probelm, you would have had to use verbose mode to get the error message. I can only assume that you sir are the real troll here, because our friend above asked a question that is worth merit and consideration, given the compatibility disaster that Apple has on their hands. To call it a disaster is not in the least bit an exaggeration.
We're going to have to ignore This is not an "occassional system hang", this is a serious problem affecting my MacBook Pro 17" and my iMac 27"., and it occured on both of them for me after installing Lion Server.
My blog post tracking the issue is here:
http://jrause.com/blog/?p=165

System Hangs after kernel update

Hi Experts,
Client side, they did kernel upgrade in production system . After this upgrade , they are not able to execute any RFCs. Whenever they are executing RFCs , it keep on running continuously (hangs long time).. Not able to get any results.
Please guide me how to handle this problem.
Thanks
Silviya

Hi,
Thanks for your reply.Just forget about kernel upgrade.In my client production, they are trying to execute RFC "RFC_ABAP_INSTALL_AND_RUN",,but the system continuously hanging for one week. They are not able to do anything with RFC. Other ABAP normal programs are working fine.
They creating invoice by RFCs. Whenever they running this RFC , system gets hanging continuously. what may be the reason..and how to correct it .please guide me ASAP. I couldnt get content of sapnote 1151775. If you have sapnote 1151775 details , please give me.
Thanks a lot
Silviya

System.MissingMethodException after adding an optional parameter

I am getting error of System.MissingMethodException after I have an optional parameter in one component and the other component which call it was not build as it call it with old number of parameters.
Only component in which parameter is added was build an deployed as patch. The calling component is old as there is no change in it.
When the calling component run it gives error :
Exception Information
Exception Type: System.MissingMethodException Message: Method not found: 'LabelURLs IPSD.BnB.Transaction.Postage.GetLabelURLs(System.String)'. Data: System.Collections.ListDictionaryInternal TargetSite: Void GenerateScanForm(Int32, Int32) HelpLink: NULL Source:
BnBDispenseQueueProcess
As far as i know it should not raise an error as new parameter is optional. One more thing calling component(EXE) run as windows service.
we found an very wired workaround to make it run. By Removing the changed component once and run calling component which will say DLL not found. The place the same DLL again and calling component works fine:).
I think i am missing some internals of .net.
Let me know if more info needed.

Hi,
Type with only optional parameter constructor and no parameter less, will throw this exception when trying to create through Activator.CreateInstance
This issue is addressed here,
http://connect.microsoft.com/VisualStudio/feedback/details/521722/system-activator-createinstance-throws-system-missingmethodexception-with-constructor-containing-an-optional-parameter
Is your component only have optional parameter constructor?
If this post answers your question, please click "Mark As Answer". If this post is helpful please click
"Mark as Helpful".

PPC G5 system hangs after Leopard Install

Well I had been monitoring things with the new OSx for awhile before installing. I had upgraded my Macbook Pro (Intel first Gen model) and my newer Intel MacMini with no issues. So after using both of these machines for quite awhile, and with the release of 10.5.2, I decided to upgrade my PPC G5 from Tiger to Leopard.
Everything seemed to go fine. I installed all possible updates and have used several apps with no problems, such as Adobe PS and Dreamweaver, etc. But now I am starting to notice a serious problem.
Every time my system either goes into Screensaver mode or sleep, when I try and bring it back it is frozen. All I get is the beachball and the only thing to do is a hard shut down with the power button. My system never did anything like this under Tiger.
Has anyone experienced a system hang like this?

Do you have any external drives (especially Maxtor or Maxtor OneTouch Drives)?
I know on Tiger I had this same problem and it turned out that there was a problem between the Mac's Firewire drivers and Maxtor OneTouch drives. Maxtor had a patch that fixed the problem on Tiger, but I'm not sure if the patch is needed also for Leopard. Not sure if Maxtor drive support is continuing since Seagate bought them.
I'm currently having a problem on Leopard with hangs (not specifically the same as yours). I'm wondering if it is again a problem with compatibility between Leopard and the Maxtor drives.

System hang after key in YF98 (Report for sales tax payable)

Hi all,
do u know wat is the problem of sys hang? i already terminate the transaction code, but sys hang also........
Thanks for helping

Dear V.Krishnan ,
I already told BASIS to restart the server, but they reject to restart the server cos they worry later they cannot up the server.
They keep asking me debug the program, but the problem is the sys hang after i key in the transaction code, i cant do nothing after that. In development server, the sys is OK after i enter the transaction code. Can u tell me wat to do now?
regards;
jee

System hangs after launching P2P

Hi,
I have just installed a K7N2 Delta MB with a 2500+ Athlon and a 3200 DDR (PQI) of 512 Mo. My OS is WinXP SP1.
Everything works very fine until I load a P2P (emule).
I had not this problem with my defunct Elite MB (with a 1800 Athlon and a 2100 DDR).
I have an ADSL connection via an ECI USB modem.
WinXP and the MB Bios and drivers are updated (using Win update and MSI Live monitor). I have also updated the VIA chipsets with VIAHyperion4in1446vp6 and updated the NVidia drivers/programs SINCE the USB host controller is an NVIDIA one (therefore the VIA USB 1.1 cannot be installed)
I have uninstalled/re-installed all my USB ports and also closed the LPT port.
The ADSL modem is connected to an hub while I have connected my optical mouse to a separate USB port (since MSI writes that the mouse consumes a lot of energy).
I have aloso enabled the USB in the Bios and even the KB USB whereas I do not have an USB KB (I had the same problem when the KB USB was not enabled).
The BIOS indicates an 100 FSB.
What should I do?
Thank you in advance.
(pardon my approximate English and technical languages).

Sharp,
I have re-installed WinXP, installed the Nvidia updates (and the MSI and Win XP ones) and installed a more recent and more efficient ADSL connection driver.
However, eMule hangs after less than 1 minute with a 166 mHz as well as with a 133 mHz FSB (this means: I cannot close it with the Task Manager and I am obliged to re-boot WinXP.
Moreover, the CPU temperature climbs quickly to 60°C at 166 mHz.
I know that I could solve the temperature problem by installing a new fan. However, I am not certain that this would solve the hanging one (although one may think that it's the temperature that leads to the hanging.
I have discovered in the eMule forum that other people with other configurations encounter the same difficulties as me. Therefore, their solutions will probably not be found on this site.
Thank you for your availability.

System hangs after leaving any window manager rebuild xorg?

Just did a full system upgrade and everything is working fine except when I leave ANY window manager like fluxbox or gnome, the systems hangs and will not drop back to console, the screen just goes black with a white horizontal line about the size of a cursor at the top of the screen. I also start my window managers from the console with startx. Anyone else had this problem? And now X is just freezing at random, very random and not all that often. Should i just rebuild Xorg?
Last edited by archgenix (2010-06-09 08:09:19)

This is weird. It's like it shuts down different functions one by one like the scroll, mouse, keyboard and other stuff that is related to gnome. It doesn't freeze, it just shuts down some functions that make it impossible to use desktop environment and now I've tried to turn off Compiz, Emerald and using the Clearlook theme but still it's the same thing.
SanskritFritz wrote:Snicko, are you using nvidia? http://www.nvnews.net/vbulletin/showthr … ?p=2426750
Yes, I'm using Nvidia but its not the same error. My computer doesn't freeze.
Last edited by Snicko (2011-05-02 14:14:05)

Query Hangs after adding new Indexes

Hi Gurus,
In order to fix some performance issues in the integration and UI, in our implementation we have added some new indexes like FST_NAME,LAST_NAME for S_CONTACT table.
We did not make any new configurations or SRF compilations. No new data is loaded into database.
But since today morning when we query in the application (Contact List Applet) the application simply hangs. We tried it with many sessions from different machines.
We thought of, this could be because of some broken earlier data source connections within the task/session. But the query in other entities is working totally fine.We tried Accounts and Assets, they are working fine.
We did a spool of SQL and executed the same statement in TOAD.It is strange, the statement is executed in just few milli seconds, as it was earlier.
We could not find root cause.
Could somebody give some ideas.
Regards

Hi Robert,
In the Object Manager session log file I found the following trace after the SQL statement.
T2.PR_EMP_ID = T11.PAR_ROW_ID (+) AND
T25.PR_DEPT_OU_ID = T3.ROW_ID (+) AND
T25.PR_DEPT_OU_ID = T21.PAR_ROW_ID (+) AND
T25.PR_DEPT_OU_ID = T24.PAR_ROW_ID (+) AND
T25.PR_SYNC_USER_ID = T10.ROW_ID (+) AND
T25.PR_SYNC_USER_ID = T15.PAR_ROW_ID (+) AND
(T25.EMP_FLG = 'N') AND
(T25.PERSON_UID LIKE :3)
ObjMgrSqlLog     Detail     4     0003f7324a41481b:0     2009-07-27 15:03:09     Bind variable 1: 0-5220
ObjMgrSqlLog     Detail     4     0003f7324a41481b:0     2009-07-27 15:03:09     Bind variable 2: 0-5220
ObjMgrSqlLog     Detail     4     0003f7324a41481b:0     2009-07-27 15:03:09     Bind variable 3: S1028056768*
ObjMgrSqlLog     Debug     5     0003f7324a41481b:0     2009-07-27 15:03:09     User search spec: S1028056768*
ObjMgrSqlLog     Debug     5     0003f7324a41481b:0     2009-07-27 15:03:09     Named search [Applet Search Spec Named Search]: [Employee Flag]='N'
ObjMgrSqlLog     Debug     5     0003f7324a41481b:0     2009-07-27 15:03:09     User sort spec:
ObjMgrSqlLog     Debug     5     0003f7324a41481b:0     2009-07-27 15:03:09     System sort spec:
ObjMgrSqlLog     Debug     5     0003f7324a41481b:0     2009-07-27 15:03:09     0xf1fcf0f8: /siebel/siebsrvr/lib/libsscaswbc.so!unsigned CSSSWEFrame::ExecuteQuery()() +0xf8
0xf1fcb62c: /siebel/siebsrvr/lib/libsscaswbc.so!unsigned CSSSWEFrame::DoInvokeMethod(const unsigned short*,CSSStringArray&,SSstring&)() +0x1ec
0xf20b6c80: /siebel/siebsrvr/lib/libsscaswbc.so!unsigned CSSSWEFrameList::DoInvokeMethod(const unsigned short*,CSSStringArray&,SSstring&)() +0x280
0xebcf0fbc: /siebel/siebsrvr/lib/libswcacmfr.so!unsigned CSSSWEFrameListBase::DoInvokeMethod(const unsigned short*,CSSStringArray&,SSstring&)() +0x77c
0xe67e17e4: /siebel/siebsrvr/lib/libswfafcfr.so!unsigned CSSSWEFrameListFINGenericButton::DoInvokeMethod(const unsigned short*,CSSStringArray&,SSstring&)() +0x164
0xf1fcb158: /siebel/siebsrvr/lib/libsscaswbc.so!unsigned CSSSWEFrame::InvokeMethod(const unsigned short*,CSSStringArray&,SSstring&)() +0x118
0xf20e7750: /siebel/siebsrvr/lib/libsscaswbc.so!unsigned CSSSWEFrameMgrInternal::InvokeAppletMethod(CSSSWEHtmlStream*,CSSSWEArgs*,WWEReqModInfo*,WWECbInfo*&,CSSStringArray&)() +0xd90
0xf20ca6cc: /siebel/siebsrvr/lib/libsscaswbc.so!unsigned CSSSWECmdProcessor::InvokeMethod(CSSSWEHtmlStream*,CSSSWEArgs*,WWEReqModInfo*,WWECbInfo*&)() +0x88c
0xf20c8c7c: /siebel/siebsrvr/lib/libsscaswbc.so!unsigned CSSSWECmdProcessor::_ProcessCommand(CSSSWEHtmlStream*,WWEReqModInfo*,WWECbInfo*&)() +0x87c
0xf20cea1c: /siebel/siebsrvr/lib/libsscaswbc.so!unsigned CSSSWECmdProcessor::ProcessCommand(CSSSWEGenericRequest*,CSSSWEGenericResponse*,WWEReqModInfo*&,WWECbInfo*&)() +0x9bc
0xf20cddb8: /siebel/siebsrvr/lib/libsscaswbc.so!unsigned CSSSWECmdProcessor::ProcessCommand(CSSSWEHttpRequest*,CSSSWEHttpResponse*,WWECbInfo*&)() +0xd8
0xf2321724: /siebel/siebsrvr/lib/libsscaswbc.so!unsigned CSSServiceSWEIface::Request(CSSSWEReqRec*,CSSSWEResponseRec*)() +0x404
0xf231e3e0: /siebel/siebsrvr/lib/libsscaswbc.so!unsigned CSSServiceSWEIface::DoInvokeMethod(const unsigned short*,const CCFPropertySet&,CCFPropertySet&)() +0xa80
0xf969b1a4: /siebel/siebsrvr/lib/libsscfom.so!unsigned CSSService::InvokeMethod(const unsigned short*,const CCFPropertySet&,CCFPropertySet&)() +0x244
0xf9b616e4: /siebel/siebsrvr/lib/libsstcsiom.so!int CSSSIOMSession::ModInvokeSrvcMethod(const unsigned short*,const unsigned short*,const unsigned short*,SSstring&)() +0x124
0xf9b6881c: /siebel/siebsrvr/lib/libsstcsiom.so!int CSSSIOMSession::RPCMiscModel(SISOMRPCCode,SISOMArgType,unsigned long,CSSSISOMRPCArgList*,CSSSISOMRPCArgList*,int&,void*)() +0x5bc
0xf9b5efb8: /siebel/siebsrvr/lib/libsstcsiom.so!int CSSSIOMSession::HandleRPC(SISOMRPCCode,SISOMArgType,unsigned long,CSSSISOMRPCArgList*,CSSSISOMRPCArgList*,int&,void*)() +0xb98
0xfa5144f8: /siebel/siebsrvr/lib/libsssasos.so!unsigned CSSClient::HandleOMRPC(CSSClientReq*)() +0x78
0xfa511698: /siebel/siebsrvr/lib/libsssasos.so!unsigned CSSClient::HandleRequest(CSSClientReq*)() +0x2f8
0xfa50c3e4: /siebel/siebsrvr/lib/libsssasos.so!unsigned _IsThreadPoolEnabled(const bool,const void*,bool&)() +0x8c4
0xfa50d45c: /siebel/siebsrvr/lib/libsssasos.so!int SOMMTServer::SessionHandleMsg(smiSisReq*)() +0x1bc
0x1ff7ac: /siebel/siebsrvr/bin/siebmtshmw!int smiMainThread::CompSessionHandleMsg(smiSisReq*)() +0x16c
0x2237fc: /siebel/siebsrvr/bin/siebmtshmw!int smiMessageQ::ProcessMessage(smiMsgQItem*,long,int)() +0x93c
0x2220c4: /siebel/siebsrvr/bin/siebmtshmw!int _smiMessageQ::ProcessRequest(void*,void*,void*&)() +0x244
0x216774: /siebel/siebsrvr/bin/siebmtshmw!int _smiWorkQueue::ProcessWorkItem(void*,void*,void*&)() +0xd4
0x2161e0: /siebel/siebsrvr/bin/siebmtshmw!int _smiWorkQueue::WorkerTask(void*)() +0x300
0x20428c: /siebel/siebsrvr/bin/siebmtshmw!int
It is stopped at the above line since a long time.
And one more observation I made is.
In the same applet for a normal other query, the working trace is as follows.
0x2161e0: /siebel/siebsrvr/bin/siebmtshmw!int _smiWorkQueue::WorkerTask(void*)() +0x300
0x20428c: /siebel/siebsrvr/bin/siebmtshmw!int SmiThrdEntryFunc(void*)() +0x46c
0xfe75be88: /siebel/siebsrvr/lib/libsslcosd.so!void*OSDInstallHook(OSDHK,void*)() +0x2a8
0xfe195730: /siebel/siebsrvr/mw/lib/libmfc400su.so!unsigned _AfxThreadEntry(void*)() +0x100
0xfcdf1288: /siebel/siebsrvr/mw/lib/libkernel32.so!void MwThread(void*)() +0x23c
0xfc8c4990: /lib/libc.so.1!_thr_slot_offset() +0x468
ObjMgrSqlCursorLog     Prepare     5     00045fbb4a414cc9:0     2009-07-27 15:03:01     Begin: PrepareStmt for Sql Cursor at 9c30618
ObjMgrSqlCursorLog     Prepare     5     00045fbb4a414cc9:0     2009-07-27 15:03:01     End: PrepareStatement for Sql Cursor at 9c30618
ObjMgrSqlLog     Detail     4     00045fbb4a414cc9:0     2009-07-27 15:03:01
***** SQL Statement Prepare Time for SQL Cursor with ID 9C30618: 0.002 seconds *****
This statement is executed in within a second from UI applet.
Please look into this.
Edited by: user4619223 on Jul 27, 2009 3:05 PM

System slow after adding sata2 hd k8n-slifi

hi.
recently added a 160gb 7200.9 seagate for more storage space but the system is slower now than before.
amd64 3200+ stock speed
k8n neo4 sli-fi
pc4000 geil 2.5-4-4-9 at pc3200 speed.
hitachi 7k250 160gb primary master
ibm 30gb primary slave
seagate 160gb 7200.9 sata2
nec 2510a dvd-rw secondary master
leadtek 7800gt
leadtek tv2000 expert - tvcard.
creative soundblaster audigy2
antec 380w truepower S
windows xp + sp2
latest drivers for both motherboard and gfx card from nvidia.
latest bios, v1.3.
if i unpack a rar archive from the hitachi to the seagate i get serious slowdowns in both windows media player and the tv-card software.
if i play a game installed on the seagate the computer basicly stops when loading data, even in games that used to run good from the hitachi.
i have had some problems when browsing with firefox 1.5.0.1 due to lack of cpu power.
installed nvidia sw-ide driver and it helped considerbly but i still get slowdowns.
these are problems i never had before i put in the seagate.
i have no problems with corrupted data and i have not tried changing sata port, its in number 3/4 now.
the harddrive is configured as one big partition with ntfs filesystem.
also noticed it takes along time to access the seagate the first time in a new explorer window.
when i click on the designated letter the explorer locks up for 5-10seconds and the hd-led is active and then i can se the content of the harddrive.
if i move a 700mb avi file from the hitachi to the seagate i can se in taskmanager that the process "system" consumes 45-70% of cpu power.
if i move the same file to the ibm harddrive instead the same process never goes above 7%
any ideas of what it can be and what i can do to fix it ?
/Tjabo

Quote from: slayek on 07-April-06, 09:37:51
Yes, there is new firmware for Seagate 7200.9 160gig SATA2 drives. If your firmware has lots of 2's, you gotta chage teh firmware. Contact segate support by email and they will supply you the files.
i know sandra is a lieng ***** but she claims the harddrive is on bios 3.AAD
Built2Last mentioned bios 3.AAE so will take a look if their is yet another updated to try.
Quote from: kakarocht on 07-April-06, 11:05:55
I think it could be your PSU problem as I can see more devices that you've now. Tried to borrow a psu from your with higher wattage. Gd luck
its not a psu error thats for sure.
the computer is 110% stable and is 110% stable with a 25% oc on the cpu and a 20% oc on the gfx card which pushes the psu quite far.
its all at stock at the moment.

Hang after added 2GB ram into S12 (VIA Nano version)

Hi
My S12 (VIA Nano version) came with original 1GB ram, and I have added the additional 2GB into my S12 (Total 3GB ram), the 3GB ram can be recognized in BIOS but it's running very slow and hang in the windows login screen.
I have asked Lenovo's customer service (Hong Kong) and they said that the S12 (VIA Nano version) can support up to total 3GB ram but I wonder that this is true.
Can anyone help me to confirm it and solve my problem?
Does anyone have the same situation? Thanks!

My Via Nano S12 is having the same hanging issue after installing a 2 GB Kingston stick from NewEgg. At times it freezes when logging into a user account, other times it freezes within 4-5 minutes of use.
I'm running memtest on it at the moment fearing bad RAM. I'll give this BIOS update a shot after having read this thread. Anyone else have any luck getting this resolved?
Message Edited by snowpunter on 08-13-2009 06:18 PM

Portege M800 - System hangs after fingerprint login

I just got my Portege M800 weeks ago and frankly speaking, this model has been giving me much trouble. Earlier it is the heat problem at the palm rest and there is no solution to it.
Now I am facing another issue with the fingerprint login. I am running on WinXP. I set the system to be locked after 5 minutes idle. So normally after 5 minutes idle, the system will require me to scan my fingerprint to unlock the Windows. But there are times that, after scanning my fingerprint and successfully matched, the screen will just be blank (only showing the desktop wallpaper). No desktop icons, no windows task bar and nothing. Press Ctrl+Alt+Del bring up nothing and no response even any key press. I tried to bring the system to hibernate by press the power button once also bring no response.
So I finally have to press and hold the power button to hard-reset the laptop.
Anybody can help or give any clue what was happening? Thanks!

I found the Fingerprint software on the Toshiba European driver page.
At this time you can find a 7.10.1.2 version for Vista 32bit and Win XP
Check this!

System Hangs After A While: Processor or Hard Drive?

I have a Early 2008 iMac that works fine for the first 30 or so minutes then begins to hang or show the beach ball of death (BBOD), especially when I try running two or more programs at the same time. I can be doing something with iTunes and try to open Safari and it will literally hang for several seconds (sometimes minutes). I can try to open Activity Monitor but it too will hang. Eventually the second program will open then Activity Monitor (3rd program) will eventually pop up. Sometime Activity Monitor will open first and will indicate the second opened program, like Safari, is unresponsive so I use Quit Process to stop the software from opening/starting.
As I mentioned, this is after I've been on the iMac for say 30-40 minutes. I have recently updated my SDRAM as I had read a thread that the dreaded BBOD was indicative of faulty memory and sure enough, I found by running Apple's Hardware Test that the original 1 GB of SDRAM was bad so I replaced it with 2 GB which brought me up to 4 GB. I run AppleJack periodically, just to keep the Permissions and Verifications happy.
After several hanging episodes, I ran TechTool Deluxe and the software runs through its entire process and when it gets to Volume Structure, it will run through the entire test and just when it gets to the end, I'll see a quick flash of Fail but the report will finish and the written report will say it Passed (?!)
Since it takes awhile for the hanging symptoms to appear, I'm wondering if its heat-related. But I'm not sure if it could be the processor or the hard drive itself. I will say my internal optical drive died some time ago (that was a long iMac Discussion thread that I too wrote in bemoaning the demise of my iMac's optical drive and it appeared several other iMac owners had the same issue too).
BTW, the Apple Hardware Test passed the processor and hard drive. And I apologize if this sounds similar to the Apple Discussions Intel-based iMac thread _System Hangs, Freezes iMac 8,1_ but I haven't upgraded my OS to 10.6 (and that seemed to be a current theme) so I didn't chime in on that thread.

I have checked the S.M.A.R.T. status in Disk Utility and it does say Verified. I also verified Disk Permissions and while it took a little time, it eventually worked its way through it.
Then I ran AHT and it passed. Then I ran it in the extended mode and the computer locked up after about two minutes.
I was able to borrow a USB drive installed with Apple Service Diagnostic (OS) for my generation of iMac and booted to it. I ran some tests, with one of them being a hard drive test, which it failed. So I think I have my answer. Thanks for your suggestions.

System Hangs after adding Storage :(

Similar Messages

Maybe you are looking for