System in the cluster not responding

          Hi,
          We are runing a weblogic cluster with a shared hard disk , with two weblogic instances
          on 120.120.120.120 and 120.120.120.121 , this is the stacktrace of the former
          instance .
          By this I feel that the other server has gone down while this system is pinging
          trying to find out whether it is up.
          Does anyone else has any other views on this ? Can there be any other cause for
          this ?
          Regards
          Mahendra
          <10:12:23.371> [StartupThread] <Proofing :> : log --------> -------------getMonitorRef
          entry ----------
          Mon Jan 26 10:12:24 EST 2004:<I> <ConMan> Bootstrap unable to get a t3 connection
          to abcdefbea01/120.120.120.121
          javax.naming.CommunicationException. Root exception is java.net.ConnectException:
          No server found at T3://120.120.120.121:7001
               at java.lang.Throwable.fillInStackTrace(Native Method)
               at java.lang.Throwable.fillInStackTrace(Compiled Code)
               at java.lang.Throwable.<init>(Compiled Code)
               at java.lang.Exception.<init>(Compiled Code)
               at java.io.IOException.<init>(Compiled Code)
               at java.net.SocketException.<init>(SocketException.java:36)
               at java.net.ConnectException.<init>(ConnectException.java:34)
               at weblogic.rjvm.RJVMFinder.findOrCreate(Compiled Code)
               at weblogic.rjvm.ServerURL.findOrCreateRJVM(Compiled Code)
               at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(Compiled Code)
               at weblogic.jndi.Environment.getContext(Compiled Code)
               at weblogic.jndi.Environment.getInitialContext(Compiled Code)
               at weblogic.rmi.Naming.getContext(Naming.java:225)
               at weblogic.rmi.Naming.lookup(Naming.java:67)
               at com.pindartech.clipper.proofing.ProofRunMonitorImpl.getMonitorRef(ProofRunMonitorImpl.java:1916)
               at com.pindartech.clipper.proofing.ProofRunMonitorImpl.isLastInQueueAlive(ProofRunMonitorImpl.java:1271)
               at com.pindartech.clipper.proofing.ProofRunMonitorImpl.initProofRunMonitorImpl(ProofRunMonitorImpl.java:248)
               at com.pindartech.clipper.proofing.ProofRunMonitorImpl.startup(ProofRunMonitorImpl.java:190)
               at weblogic.t3.srvr.StartupThread.runStartup(StartupThread.java:182)
               at weblogic.t3.srvr.StartupThread.doWork(Compiled Code)
               at weblogic.t3.srvr.PropertyExecuteThread.run(PropertyExecuteThread.java:62)
          --------------- nested within: ------------------
          weblogic.rmi.UnknownHostException: Could not init server [T3://120.120.120.121:7001/ProofRunMonitor120.120.120.121]
          - with nested exception:
          [javax.naming.CommunicationException [Root exception is java.net.ConnectException:
          No server found at T3://120.120.120.121:7001]]
               at java.lang.Throwable.fillInStackTrace(Native Method)
               at java.lang.Throwable.fillInStackTrace(Compiled Code)
               at java.lang.Throwable.<init>(Compiled Code)
               at java.lang.Exception.<init>(Compiled Code)
               at java.io.IOException.<init>(Compiled Code)
               at weblogic.common.T3Exception.<init>(T3Exception.java:47)
               at weblogic.rmi.RemoteException.<init>(RemoteException.java:41)
               at weblogic.rmi.UnknownHostException.<init>(UnknownHostException.java:32)
               at weblogic.rmi.Naming.getContext(Naming.java:228)
               at weblogic.rmi.Naming.lookup(Naming.java:67)
               at com.pindartech.clipper.proofing.ProofRunMonitorImpl.getMonitorRef(ProofRunMonitorImpl.java:1916)
               at com.pindartech.clipper.proofing.ProofRunMonitorImpl.isLastInQueueAlive(ProofRunMonitorImpl.java:1271)
               at com.pindartech.clipper.proofing.ProofRunMonitorImpl.initProofRunMonitorImpl(ProofRunMonitorImpl.java:248)
               at com.pindartech.clipper.proofing.ProofRunMonitorImpl.startup(ProofRunMonitorImpl.java:190)
               at weblogic.t3.srvr.StartupThread.runStartup(StartupThread.java:182)
               at weblogic.t3.srvr.StartupThread.doWork(Compiled Code)
               at weblogic.t3.srvr.PropertyExecuteThread.run(PropertyExecuteThread.java:62)

          How did you configured the managed servers. did you configured your managed server
          with different port. Can you please send config.xml file.

Similar Messages

I have Win 7 64bit and the computer "not responding" often.

The event logs show that Bonjour is the biggest problem in system failures and the computer Not Responding. Is there a fix for Bonjour or is there a way to run itunes without it?
If itunes is not compatible for windows 7 Does apple have something else to use for media?

Hello AEC396
It sounds like you are trying to burn a playlist to a disc in iTunes, but you are getting an errorabout missing drivers. I found a couple of resources that I think might help with an error like this.
I recommend starting with the steps in this article:
iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install
http://support.apple.com/kb/TS2308
If you are still having trouble with burning a disc after following the steps in that article, I recommend following the steps in this article:
iTunes for Windows: Additional troubleshooting tips for burning issues
http://support.apple.com/kb/TS1374
Thank you for using Apple Support Communities.
Best,
Sheila M.

Another one with the "did not respond" error

Hi all,
We've been successfully video chatting with my parents using iChat AV for years on our old machine - an 800 MHz G4 iMac. We just upgraded to a new iMac with the Intel Core Duo processor, and now are getting the "did not respond" error that others are describing. Because nothing else has changed in the setup at either end other than our new machine, the problem must lie in the new iMac. After perusing this forum and Ralph's site, I tried setting the QuickTime streaming speed to 1.5 Mbps rather than "automatic," and turned off IPv6, but to no avail.
Any other suggestions?
Thanks in advance!
The Rosses

Hi rossma,
If you go to System Preferences > Network and then
Select the Connection method in the second drop
down.
Then the TCP/IP tab
Does this say Using DHCP ?
Does it give you an IP of something close to
192.168.1.100 ?
Yes.
Does it list the "router" IP as being 192.168.1.1 ?
Yes.
If you connect the computer to the Toshiba what IP do
you get then ?
Does it match the same IP as when you go here
http://myip.dk/
Well, I didn't try disconnecting the iMac from the Linksys and hooking it up directly to the cable modem (would require wrestling with a nest of cables), but I can see the IP address that the Outside World sees in the Linksys configuration page, and that matches what the webpage you mentioned says. if you need me to connect it directly, let me know and I'll try that.
If it does then the Toshiba is in Bridge mode and the
Linksys may be doing the ISP login
I can not see the Toshiba in this list
http://portforward.com/routers.htm which is why I
think it is not routing and is in Bridge mode. (this
will mean all the ports are open in it).
If all ports are open, then the cable modem shouldn't be the problem, right?
As far as Quicktime is concerned it might pay to
check the Font Book and see if Helvetica is active.
Huh? This is the first I've heard of Helvetica being problematic! It's active at the moment - should I disable it?
Thanks for all your patience and effort on my behalf!

The server not responding

Frequently, the server not responding at the logins of the users. It's not hanging but not responding. All the Oracle services is running and the Event Viewer not record any error or warning. I need to know if there are someone Oracle log where I can check this. Thanks.

That could be a hardware problem with the WiFi antenna. Contact Apple Support for assistance: Contact Us

TS1363 When ipod starts to sync, the "program not responding" message comes on and shuts down itunes. Why?

When ipod starts to sync, the "program not responding" message comes on and shuts down itunes. Why?

Did you already try to delete the photo cache? iTunes: Understanding the iPod Photo Cache folder

I can't launch Safari. When I right click on the icon, the "Application not responding" is grey and no matter what method I use to Force quit, I get no response.

I can't launch Safari. When I right click on the icon, the "Application not responding" is grey and no matter what method I use to Force quit, I get no response.

Do a backup.
Quit the application.
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Select Library. Then go to Preferences/com.apple.Safari.plist. Move the .plist to your desktop.
Restart the computer, open the application and test. If it works okay, delete the plist from the desktop.
If the application is the same, return the .plist to where you got it from, overwriting the newer one.
Thanks to leonie for some information contained in this.

TS3274 My ipad has stopped responding but the screen is still on. So i cant turn it off because i cant slide the red slider because of the screen not responding. Anysolution on this problem?

My ipad has stopped responding but the screen is still on. So i cant turn it off because i cant slide the red slider because of the screen not responding. Anysolution on this problem?

Try a reset:
Hold the Sleep and Home button down for about 10 second until you see the Apple logo.

System wide keyboard commands not responding

My mac stops responding to system wide keyboard commands such as the Dashboard, Expose and Spotlight shortcuts. It also does not respond to Command-Tab to switch between applications. Hitting the keys for any of these leads to no response whatsoever.
I have run into this problem several times over the last few months, and the only solution I have found is to restart the computer. Initially, it appeared to be related to the ScreenSaver process crashing. I could look in the System Monitor and see that this process had gone red, when I forced the process to quit, the keyboard commands were restored. More recently, though, this has not been the case, and I have had to restart.
Any guesses what could cause this or suggestions on how to diagnose it? Thanks for any help.

I'll answer in reverse.
When I've experienced the problem, I have tried other (older style) keyboards, and that did not resolve the problem.
I've never tried creating another user account.
I'll try disabling the screen saver, but part of the problem is that this issue is sufficiently intermittent that it take a while to determine if this has a benefit. I was hoping to find some more systematic way to diagnose what has been happening. Any suggestions along these lines?
Thanks for your help and interest.

Help with the program not responding error

I just joined the CC and in Illustrator I keep getting "program not responding" please advise,
Eleanor

Do you have Tahoma and Verdana fonts enabled on your system?
Also see this other relevant link:
http://forums.adobe.com/thread/1309484
Nancy O.

Why come up the "service not responding " message during operation

Dear all
I have some critical issue about servie not respondig message occurred during the N7K operation
N7K_XXX# conf t
Enter configuration commands, one per line. End with CNTL/Z.
N7K_XXX(config)# ip access-list nh
Service not responding
N7K_XXX(config)#
N7K_XXX(config)# end
that happen take about 15 minute however running show command normal and system also turnning the normal mode after 15minute.
anybody know about kind like happen,or any solution or why come up that message
please help out for me
thanks.

Hi evan191,
Thanks for using Apple Support Communities. This article has some steps you can try if your messages aren't sending as iMessages:
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
If you still can't send or receive iMessages
Ensure that iMessage is turned on in Settings > Messages.
To send and receive iMessages, your device must have a valid cellular or Wi-Fi data connection.
iPhone: Troubleshooting Cellular data
iOS: Troubleshooting Wi-Fi networks and connections
iMessage registration validates your Apple ID for use with iMessage. If you are unable to activate iMessage, follow this article.
If an iMessage cannot be sent, it will be resent using SMS or MMS, depending on the content. You can turn this behavior on or off in Settings > Messages > Send As SMS. Carrier messaging rates may apply.
Verify that the Apple ID or phone number is listed in Settings > Messages > Send & Receive.
Cheers,
- Ari

Keep getting the message not responding when playing Facebook Help

HI,
when I am playing a game in facebook, I keep receiving message not responding and I have to shut the system down and reopen I have tried cleaning history which does not help. I believe the problem might be firefox Is there any way you can check and let me know. I have done most of the little message that show on the first here and still it does not help.
Regards,
Kathy

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

Why does the camera not respond to tapping?

I have used UITapGestureRecognizer so that an instance of UIImageView will respond to tapping when applied to images. However, so far, the camera does not respond to anything I try in this regard.
Could it be that the camera view does not respond to tapping?
Thanks.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode.)

Windows 7 always gives the message ( Not Responding )

HI,,
My Laptop gives me the message of ( Not responding ) all the time on all applications .. I make sfc /scannow and it gives me the result ( Corrupting files are existing in windows but it can not be resolved ) ..
So , how can i repair these corrupted files ...

Hi,
Run command chkdsc /r /f check the result.
If you have a resore point, you can also return your system to a previous state when your computer was functioning fine.
If this issue doesn't exist in another user account, then it might be related with a corruped user profile, if so, try this link
http://windows.microsoft.com/en-in/windows/fix-corrupted-user-profile#1TC=windows-7
Yolanda Zhu
TechNet Community Support

The Cluster not failover when i shutdown one managed server?

Hello, I created one cluster whit two managed servers, and deployed an application across the cluster, but the weblogic server gave me two url and two different port for access to this application.
http://server1:7003/App_name
http://server1:7005/App_name
When I shutdown immediate one managed server i lost the connection whit the application from this managed server, My question is, the failover and de load balancer not work, why??
Why two diferent address?
thank any help

Well you have two different addresses (URL) because those are two physical managed servers. By creating a cluster you are not automatically going to have a virtual address (URL) that will load balance requests for that application between those two managed servers.
If you want one URL to access this application, you will have to have some kind of web server in front of your WebLogic. You can install and configure Oracle HTTP Server to route requests to WebLogic cluster. Refer this:
http://download.oracle.com/docs/cd/E12839_01/web.1111/e10144/intro_ohs.htm#i1008837
And this for details on how to configure mod_wl_ohs to route requests from OHS to WLS:
http://download.oracle.com/docs/cd/E12839_01/web.1111/e10144/under_mods.htm#BABGCGHJ
Hope this helps.
Thanks
Shail

My systems preferences is "Applcation not responding"

When I attempt to use my System Preferences, is gets a not responding warning and my system locks up. Any ideas why?

Does this occur in Safe Mode?
Safe Mode or "Safe Boot" is a troubleshooting mode that bypasses all third party system extensions and loads only required system components. Read about it: Starting up in Safe Mode
Starting your Mac in Safe Mode will take longer than usual, graphics will not render smoothly, audio is disabled on some Macs, and some programs (iTunes for example) may not work at all. To end Safe Mode restart your Mac normally. Shutdown will take longer as well.

System in the cluster not responding

Similar Messages

Maybe you are looking for