System landscape clients

hi gurus,
we are using three system landscape here, when i am into DEV system and execute SCC4 i am able to see 100,000,066,001clients...
now from here only i.e after logging into DEV system how can i see what are clients in QAS and PRD system, is there any transaction code for this so that i can log into that thru RFC .. or say how can i view all the available clients of DEV,QAS, and PRD being into DEV system
cheers

Hi,
Go to SM59 transaction. And check RFC's for your quality and production client. Then you can use Remote logon in these RFC's. Then you will get screen of QAS and PRD system and then execute SCC4 transaction and check all the details.
Thanks
Sunny

Similar Messages

Issue with same R/3 system ID - Client in XI landscape

Hi there,
WHAT:
We are experiencing a serious problem in our XI landscape.
The source of the problem is due to different SAP systems within the same landscape which have the same system ID and client nr. Our customer has divided its business into internal companies which use different SAP boxes/instances but share the same XI environment.
HOW:
All systems have been defined in SLD as technical and business systems. This is an example how it looks like in SLD:
DEV on business-system1; client 200
DEV on business-system2; client 200
PRD on business-system5; client 400
PRD on business-system6; client 400
WHEN:
When we try to add a second business system/service (in the integration-builder directory) with the same combination of System ID (i.e. DEV) and client nr. (e.g. 200), XI does not allow you to activate this second system.
The error message we get; There's already another system configured in the directory with this same combination of system ID + client.
Is this behavior normal? Why is the integration-builder/directory looking at the technical details of the configured systems in SLD?
Is this a feature or a bug?
Please send me any feedback or some clues how to figure out what's going on here, tnx all.
Rob.
Message was edited by: Roberto Viana

> Basically we can have only one BS as the attributes
> are same but installed on different TS?Is there any
> specific need that you want two BS?Can you tell
> wether having one BS will cause any problem for your
> interfaces?If not,Have one BS and that should be fine.
Sravya,
Actually that's the situation we have now; we have two different BS (in this case with the same attributes: SYSTEM ID=DEV and CLIENT=200.) installed on top of two different TS's. This configuration is not accepted by the Directory in the configuration builder. As I said before when you try to add the second BS with the same attributes, XI generates an error that does not allow you to activate the change list.
So these two BS's have to be configured in SLD as different BS's, otherwise XI would not be able to correctly do the technical routing.
What I dont understand is why is XI looking at technical data from this systems at configuration time ? As far I know at configuration time XI is only suppose to work with data declared in the business system information and not at technical details like system ID's and client numbers. These kind of information belongs to the SLD layer and not at configuration level.
Please correct me if Im wrong, tnx.
R.
Message was edited by: Roberto Viana

Could not get system landscape directory client - NWDS 7.31 SP 09

Hi Experts,
We are unable to import development configurations from NWDI 7.4 to NWDS 7.31 for one of the developer's id. Other developers are able to import the
configuration successfully in NWDS and are able to create projects without any issues. In fact, I am able to import the development configurations from his Id on my machine.
The error message that is appearing is as follows: Could not get system landscape directory client.
PFB the NWDS logs:
null
Error
Tue Jan 06 12:48:58 IST 2015
List Development Configurations failed [Error: com.sap.ide.dii05.ui.internal.sld.SldContext Thread[ModalContext,6,main]]
com.sap.lcr.api.cimclient.LcrException: com.sap.lcr.api.cimclient.CIMClientException: HTTP response code: 407 (Proxy Authentication Required ( Forefront TMG requires authorization to fulfill the request. Access to the Web Proxy filter is denied. ))
at com.sap.lcr.api.cimclient.HttpRequestSender.newClientException(HttpRequestSender.java:719)
at com.sap.lcr.api.cimclient.HttpRequestSender.processResponse(HttpRequestSender.java:608)
at com.sap.lcr.api.cimclient.HttpRequestSender.send(HttpRequestSender.java:352)
at com.sap.lcr.api.cimclient.CIMOMClient.sendImpl(CIMOMClient.java:205)
at com.sap.lcr.api.cimclient.CIMOMClient.send(CIMOMClient.java:153)
at com.sap.lcr.api.cimclient.CIMOMClient.enumerateInstancesImpl(CIMOMClient.java:450)
at com.sap.lcr.api.cimclient.CIMOMClient.enumerateInstances(CIMOMClient.java:754)
at com.sap.lcr.api.cimclient.CIMClient.enumerateInstances(CIMClient.java:989)
at com.sap.lcr.api.sapmodel.JavaCIMObjectAccessor.enumerateInstances(JavaCIMObjectAccessor.java:213)
at com.sap.lcr.api.sapmodel.SAP_DesignTimeConfigurationAccessor.enumerateInstances(SAP_DesignTimeConfigurationAccessor.java:164)
at com.sap.ide.dii05.lib.internal.sld.SldBasicContext.listRemoteDevConfNames(SldBasicContext.java:197)
at com.sap.ide.dii05.ui.internal.devconf.wizard.DevConfImportSldPage$6.run(DevConfImportSldPage.java:293)
at org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext.java:121)
NWDS version: 7.31 SP 09
Error Screenshot -
Any pointers will be highly appreciated.
BR,
Anurag

Hi,
we had some issues recently with this, and the trace also mentions proxy issues. Could you please try direct connection in that preferences (in other words do not use proxy settings in NWDS) ?
Is it possible that there is some kind of web-filter application installed that is blocking the request?
I'd suggest to google for this error:
407 (Proxy Authentication Required ( Forefront TMG requires authorization to fulfill the request. Access to the Web Proxy filter is denied. ))
Perhaps the problem is not even sap related.
Is Microsoft Forefront TMG (Threat Management Gateway after some googleing) perhaps configured in the way that it is not allowing this request ? Perhaps the IT guys of your company could look into this.
Microsoft Forefront Threat Management Gateway - Wikipedia, the free encyclopedia
12209 Forefront TMG requires authorization to fulfill the request. Access to the Web Proxy filter is denied.
Cheers,
Ervin

Client Roles in a Three System Landscape

I initially post this Question in other forum:
Hi all,
We have a three system landscape. In the Development client, we have the Customizing Client, the Sandbox Cliet and a Training client. I have some questions about this configuration:
Acording to System and Client Settings - System Administration Assistant (BC-RRR) - SAP Library, Training client must be in Quality Assurance System, and it must be created by client copy from client QTST (it gets the transports from Custimizing). In this Training System we must create users for all our key-users to training. We must not create any user for key-users in sandbox client (this client is for the DEV team). is that ok?
What are the downsides of having out TRAINING client in the Development System?
Now, a consultant is asking me to open some modifications in the TRAINING client: He needs to load Exchange rates (OB08) in that client, but he is getting "Client is not modifiable". They are asking me to create users for key-users in the sandbox client and the training client.
I need to know if they are using the system in the right way. I dont want the system to become a mess.
I been reading this notes: SAP Note 356483. I don´t know what this means: "Now the corresponding Customizing object is no longer subject to the transport connection and is excluded from the changeability check. The change is active in all clients of the system. You can also change the Customizing object in a locked client (independent of the client role). However, now it is also no longer possible to manually transport entries of the view or table."
Aditional notes:
SAP Note 78329, sap kb 356483
Thanks for your help!
One person answere me this:
Hi
You should create your question in the appropriate area :
Software Logistics
The drawback of having training client in dev system is that it could be negatively impacted by ongoing changes performed in that system (custom program that are changed, not working...)
Some specific customizing changes can be set as current setting and thus can be modified without needing to open customizing but only if the client is set as productive.
There is also a way do deactivate modification recording of objects (aka deactivating the transport connection) but, if you apply this change for this activity/object, you won't be able any more to record change into transport orders
Regards
356483 - Customizing: Current settings in the test system
77430 - Customizing: Current settings

Hi Andres
I do not really now the exact impact, it might prevent some business data from being mass processed or overwritten...
I did had to deactivate the transport connection on specific objects/activities for some customers.
It depends on the frequency of that activity. I don't like to open the client to modification as you can sometime forget to close it back, and sometime also it gave the opportunity to other consultants to make changes that would create inconsistency among envt in the whole landscape.
At least activating the recording of changes could help in tracking the source of modifications
RZ10 => rec/client=ALL
STMS => RECCLIENT=ALL
Regards

System Landscape using multiple clients scenario for BW

Hi Friends,
I have a scenario where I want to use multiple BW clients based on single server.
I have made client copy of the development server and want to transport the objects
to the target clients.
I am aware that such a scenario works fine in R/3 and infact i have used it
.But in BW when i hit RSA1 I get an error message "you can only use client(010)"-my development client of which copy was made.
The client copy system is 102.
Now I read a thread on sdn which said change client entry in RSADMINA table .I changed it ,but I think its cross client table and hence RSA1 is neither workinging in client copy or the parent system.I reverted back entry in client 102 and saw that development client working again fine like before.(also RSADMINA) value changed in 010.
I have tried to fix it by creating appropriate mappings using SCC4/BD54/SALE/WE20/RZ10
.Also created mapping WE20 for Partner profile and assigned the logica system.
Is it possible to have such a system landscape?
Can anyone give some useful suggestions?

Hi..thanks to all of you....
I think this thing boils down to table RSADMINA where you maintain entry for your client.
The primary key there is 'Customizing ID' and when you specify there "BW" .You can't make another entry for another MANDT with another customizing id.
Whenever u login to any other client and you change entry of MANDT it is going to be reflected to all the clients and thats what is the issue.So you can't mantain mulitple entries as you can't enter two customizing ids. there.
Infact there are many reasons in the background as well which the sap note mentions like common number ranges..etc.
Lastly ..Ofcourse as Siggi said you can have another R/3 or CRM system etc on the same server but no two BW clients.I think SAP should not allow client copy for BW on the same server..it will help some bad efforts
Thanks for the support everyone.
Regards,
Rakesh
Edited by: Rakesh Kumar on Jun 15, 2009 12:08 PM

IDOC-Xi-IDOC: CRM - XI -R/3 (No service for system SAPOCC, client ** in ID)

Hi all
I am doing a scenario IDOC - Xi - IDOC where CRM sends an IDOC to R/3 via PI.
I have configured everything in OCC (CRM system), PI and BSC (R/3 system) but when I test it with the transaction WE19 in OCC nothing happens in PI or BSC.
All i can see if a message in SM58 transaction in OCC.
Function Module - IDOC_INBOUND_ASYNCHRONOUS
Target System - XI.
Status Text - No service for system SAPOCC, client *** in Integration Directory.
Could anyone tell me what is the problem.
Your help will be very much appreciated
Regards
Naina

Error message: No service for system SAPCRD client 201 in the integration directory
Cause: There is no service without party in PI server that represents OCC server with client details.
Solution:
We send IDocs from system OCC to PI. In the control record (Segment EDIDC40) of the IDoc, the SNDPOR (SenderPort) field contains the value "SAPCRD". The client of the sending system is determined by the MANDT field of the control record. The system ID and client are then used to determine a service without party of the type (business-system/business-service)
In System Landscape Directory (SLD) create a technical system for OCC system and assign a client for the same. Don't forget to assign an "ALE logical system" to the technical system created. Create a business system for this technical system. Then Business System can be imported under service without party/update the details existing in PI.
Edited by: Rodrigo Alejandro Pertierra on Jun 23, 2010 10:28 AM

Doubts in System Landscape Directory

Hello All,
I got some basic doubts in SLD.
Why do we need to store the information about the installed products and to be installed products in software catalog?
And, what is this techncal system?
After reading few help sites, what I understand is the following:
For example SAP is a product and CRM etc are the software components. We create the technical system for this product like for client 100 we create a technical system and for client 200 we create another technical system. And we give some logical names, called business sytems, to these technical systems.
My second question is, why do we need to create all these information(the information in SLD)? Why cant we directly create messages types, message interfaces etc and configure them in Integration directory without using the information in SLD like business system?
In Integration Directory, we say that the sender is one Business System and receiver is another business system. These business system are created based on some technical systems. These technical systems are based on some software components and product. This product and the software component might be a installed or non installed product. Then how do we can get the connection between the sender and the business system? Can you please explain me the idea behind considering the sender and reciever as business systems.
Can anybody please clear the above doubts?
Priya

Hi Priya,
SLD:
The System Landscape Directory of SAP NetWeaver (SLD) serves as a central information repository for your system landscape. A system landscape consists of a number of hardware and software components that depend on each other with regard to installation, software updates, and demands on interfaces.
- so talking about the working of an SLD, here if any information is required for the integration server regarding the systems(logical or physical) and the software (installed products) it refers to the SLD.
- to tell you about the other features it has....it captures the dimensions of the system landscape like solution dimension, transport dimension and technical dimension.
- putting it in short XI IS A CLIENT OF SLD
Also go thru this link and understand more about SLD <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/31/f0ff69551e4f259fdad799a229363e/frameset.htm">System Landscape Directory</a>

SOFTWARE CATALOG:
The SLD contains a Software Catalog of all installable SAP products and software components. The Software Catalog includes information about support packages and dependencies between the products and software components. This information is the basis for the description of the system landscape.
Also go thru this link and understand more about Software Catalog <a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/a2/2999ef97ea2b4790165f9ca5c05c41/content.htm">Software Catalog</a>
TECHNICAL SYSTEM, BUSINESS SYSTEMS, SOFTWARE PRODUCTS:
Technical system correlates the software to the physical host on which it is installed
Or in other words Technical systems are application systems that are installed in your system landscape.
- they are actually the basis for defining the business systems.
- we assign a technical system to a business system to help the SLD make the appropriate association.
- the software products used by the business system are got from the technical system definition.
- to note 1 technical system can have more than one business system assigned to it....and as told the SLD make the appropriate association between them.
Also go thru this link and understand more about each of it:
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/24/8fa93e08503614e10000000a114084/content.htm">Technical Systems</a>
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/42/c817d9d2296bb2e10000000a1553f6/content.htm">Business Systems</a>
<a href="/people/sap.india5/blog/2005/11/03/xi-software-logistics-1-sld-preparation Preparation</a>
Regards,
Abhy

Data migration from one DEV(DE1) system to other DEV(DE2) BW system using client copy or client export import

HI SAP Gurus,
Please find the below details:
SAP NetWeaver 7.3
We have to copy all customized or developed BW objects like master data, DSO's , Infocubes , Reports etc.
We need only the design changes but not the data within the DSO or cubes that exist .
We have tried below procedure:
1) Taken export of DE1 source client 400 with profile SAP_CUST
2) Imported transports generated for above export into DE2 target client 350.
3) Executed transaction SCC3 and performed post processing, post processing was successful . Still we are not able to see DSO's, infocubes ,reports.
Please lets us know what we need to do to fulfill our requirement.
Thanks,
Avadhesh
+ 91 8095226536

Hi Basis,
Please refer to below documentation on how to perform system copy in BI systems
How to System Copy in SAP Business Intelligence System Landscapes (NW2004)
Post processing steps for SAP BW system copy or db copy
BI systems has mostly cross client objects. So client copy with SAP_CUST profile will not serve your purpose.
Hope this helps.
Regards,
Deepak Kori

Adding system and client specific TMS approval steps

Hello,
In defining QA approval steps, how to define a step which is not system and client wide?
When adding a new step, it is automaticaly defined with * in the client and system fields, and when changing the steps, these fields are not editable. However, there are several approval steps for which a specific system and client are entered, but this was done by a consultant, who was here some years ago.
Does anyone know how to do this?
Thanks in advance,
A

Hi Aleksandra,
Did you ever find a solution to this issue. I too have multiple QA systems in our landscape (4 system landscape), and yet I can not defined system/client specific approval procedures in STMS.
The system and client options don't even appear when I go into change mode, yet table TMSQASTEPS has the options available. Direct table update works fine, but it would be nice to know the "SAP standard" way of doing this.
Cheers
Shaun

Extraction failing after source system and client copy

Hi all,
We refreshed our source QA system with a copy of production. And basically tried to "restore" the connection from our BW QA system. Some of the datasources can be extracted from BW, others fail with an error of "No transfer structure is available for InfoSource 0COSTCENTER_ATTR in the source system".
Trying to do the same thing with RSA3 in the source system, works fine.
The strange thing is it works for some objects but not others.
here's what we did:
1. System copy from R3 Prod to R3 QA
2. Client copy with R3 QA client 300 -> 200
3. Restore connectivity in BW QA to the R3 QA system (Using RSA1 -> Source System -> Restore)
4. Now some objects can be extracted in BW, others fail as I mentioned above.
I have regenerated the transfer structures in BW and R3.
All of these objects that don't work seem to work in RSA3 on the R3 system but not in RSA1 on BW.
All the SAP documentation is geared to copying the R3 source system and then restoring connectivity between BW and R3. I don't think any of it involves copying the client in the R3 source system - which might be causing our problems.
We are using an SAP delivered PDF and note 886102 mainly for direction.
SAP PDF is "How to... System Copy in SAP Business Intelligence System Landscapes".
Does anyone have any ideas?
Thanks,
Kevin

Hi,
can you isolate somehow the kind of DataSource which works and those who don't?
Master data / transactional or client dependent and not, delta or full....
To which R/3 client is your BW connected? when you succeed loading the data, is it coming from the right client?
RSA3: do you run it specifying your BW client in the target sys field? does it make a difference if yes or if not?
Are your RFC connections and partner profiles all right?
Check some IDOCs sent by BW received in R/3 and vice-versa (RSSEND, RSINFO, RSRQST..). Load a hierarchy (via IDOC)... verify that your IDOC have the correct partner settings....
let us know
Olivier.
Message was edited by:
Olivier Cora

Unable to read software component version from System Landscape Directory "

I've worked in past creating/importing SWCV, but this is new system PI7.0 and stuck.
A) Is my understanding on resolution correct?
Should I go and apply notes 940309 and create client copy of existing client 001
 OR
change role of client 001; SXMB_ADMIN -> 'Integration Engine Configuration' to 'Integration Server'
I have no problem in using client 001 as Integration server, all I want is import of SWCV to work. Thanks. Appreciate the help.
B) Here is what I have done and the error:
1) Followed weblog below and created product, software component, technical system, business sytem in SLD.
/people/srinivas.vanamala2/blog/2007/02/05/step-by-step-guide-xml-file-2-xml-file-scenario-part-i
2) When I import the SWC from integration repository getting error
(Unable to read software component version from System Landscape Directory "server:5<system number>00").
C) Pointers used from the forum to debug the issue, but still no luck
Below are the points checked from the forum and all steps are correct, but still have issues with the import
1) check the RFCs SAPSLDAPI, LCRSAPRFC, connection test pass as the program ID registered with Jco
2) T-code SLDCHECK no errors (followed http://help.sap.com/saphelp_nw04/helpdata/de/78/20244134a56532e10000000a1550b0/content.htm)
3) T-code SLDAPICUST got user PIAPPLUSER, pwd is correct (reset the pwd)
4) logged using PIAPPLUSER http://server:port/sld and it works
5) One of the weblog SLD Check Failed (LCR_LIST_BUSINESS_SYSTEMS function doesn't work) referred to apply notes 940309
Notes: 940309
You are installing 'SAP NetWeaver 2004s SR1 ABAP+Java' Usage Type 'NetWeaver Process Integration (PI)'.
You don't want to use the default client 001, but another client as Integration Server.

applied portion (PIPostInstallProcess) of OSS notes 940309 and it resolved.
Note:
I still retained client 001 and didn't do client copy as mentioned in the notes. The wizard based CTC tool helped. Here are the details if someone has similar issue and want to know further details:
A NetWeaver Process Integration (PI) Installation (ABAP+Java) has two parts: Installation and configuration. The former is done by the Installer, the latter by the 'Central Template Configuration' (CTC) Tool.
http://help.sap.com/saphelp_nw04s/helpdata/en/14/39084136b5f423e10000000a155106/frameset.htm
1. Call the wizard-based configuration tool as described in Configuration Wizard.
 2. Select the scenario PI and the task PIPostInstallProcess.
 3. Choose Execute.
A list of the steps to be executed by the wizard is displayed.
 4. Choose Install.

No service for system BC_TREMAx, client 100 in Integration Directory

Hi, I have had this problem and spent to many hours on this. I decided to post the config once I got it working.
I am NOT using the system landscape directory for the java connector -> XI communicaiton.
The SLD is used for XI -> SAP
Scenario: send idocs
SAP Java connector -> SAP XI -> SAP 4.6c
here is the relevant code (the rest of it is in the examples of the java connector):
               System.out.println("setMessageType");
               doc.setMessageType("ACC_DOCUMENT");
                        doc.setRecipientPort("SAPSE1"); // get stuck in XI mapping if not set, otherwise not needed to get file into XI
               doc.setRecipientPartnerType("LS");
               doc.setRecipientPartnerNumber("SE1CLNT500");
               doc.setSenderPort("BC_TREMA");
               doc.setSenderPartnerType("LS");
               doc.setSenderPartnerNumber("BC_TREMA");
               doc.setClient("100");
Inside XI configuration integration builder
Business Service: Service: BC_TREMA
Under the menu Service - Adapter specific identifiers
Idoc Adapter Logical system: BC_TREMA (This thing is important when sending idoc XI -> SAP and should match the logical sys in the receiving SAP system)
IDoc Adapter and RFC adapter R/3 Sysytem ID: BC_TREMA
Client: 100
On receiver tab:
Name                        NameSpace                               Software componenet
ACC_DOCUMENT.ACC_DOCUMENT01 urn:sap-com:document:sap:idoc:messages TREMA_GLM, 1.0...
On sender tab:
Name                        NameSpace                               Software componenet
ACC_DOCUMENT.ACC_DOCUMENT01 urn:sap-com:document:sap:idoc:messages TREMA_GLM, 1.0...
In IDX1 trans
Port: BC_TREMA
Client: 100
RFC Destination: SE1 (A SAP test system from where IDOC def can be imported, rfc dests are setup in SM59)
In IDX2 trans
Make sure to import the IDOC type beforehand. If IDOC is not imported you get system error 000 in java connector in SP14.
That was a hard one to track down.
This should be it.
Another example where the difference is the SAP prefix...
               doc.setMessageType("ACC_DOCUMENT");
                  doc.setRecipientPort("SAPSE1"); // get stuck in XI mapping if not set
               doc.setRecipientPartnerType("LS");
               doc.setRecipientPartnerNumber("SE1CLNT500");
               doc.setSenderPort("SAP3MA");
               doc.setSenderPartnerType("LS");
               doc.setSenderPartnerNumber("TREMACLNT");
               doc.setClient("100");
Inside XI configuration integration builder
Business Service: Service: TREMACLNT
Under the menu Service - Adapter specific identifiers
Idoc Adapter Logical system: TAPPMAN (This thing is important when sending idoc XI -> SAP and should match the logical sys in the receiving SAP system)
IDoc Adapter and RFC adapter R/3 Sysytem ID: 3MA
Client: 100
On receiver tab:
Name                        NameSpace                               Software componenet
ACC_DOCUMENT.ACC_DOCUMENT01 urn:sap-com:document:sap:idoc:messages TREMA_GLM, 1.0...
On sender tab:
Name                        NameSpace                               Software componenet
ACC_DOCUMENT.ACC_DOCUMENT01 urn:sap-com:document:sap:idoc:messages TREMA_GLM, 1.0...
In IDX1 trans
Port: SAP3MA (Note that the 3MA here is matched against the IDoc Adapter and RFC adapter R/3 Sysytem ID: 3MA)
(a not so well documented feature)
Client: 100
RFC Destination: SE1 (A SAP test system from where IDOC def can be imported, rfc dests are setup in SM59)
In IDX2 trans
Make sure to import the IDOC type beforehand. If IDOC is not imported you get system error 000 in java connector in SP14.
SE1CLNT500 as a SAP business system setup in the system landscape directory SLD
Receiver determination:
Sender
Service: TREMACLNT
Interface: ACC_DOCUMENT.ACC_DOCUMENT01
Namespace: urn:sap-com:document:sap:idoc:messages
Receiver
Party: *
Service: *
Configured receivers:
Service: SE1CLNT500
After saving you may do the setup in the bottom frame:
Configuration Overview for Receiver Determination
|SE1CLNT500 ->
         ACC_DOCUMENT.ACC_IM_ACC_DOCUMENT Receiver _IDoc to SE1CLNT500
Interface determination
Sender
Service: TREMACLNT
Interface: ACC_DOCUMENT.ACC_DOCUMENT01
Namespace: urn:sap-com:document:sap:idoc:messages
Receiver
Service: SE1CLNT500
Configured inbound interfaces
Name                         Namespace                               Interface mapping Namespace                  Software comp
ACC_DOCUMENT.ACC_DOCUMENT01 urn:sap-com:document:sap:idoc:messages IM_ACC_DOCUMENT   urn:trema-com:trema:trema TREMA_GLM...
Sender agreement
Not needed for IDocs
Receiver agreement
Sender
Service: TREMACLNT
Receiver
Service: SE1CLNT500
Interface: ACC_DOCUMENT.ACC_DOCUMENT01
Namespace: urn:sap-com:document:sap:idoc:messages
Receiver communication channel: Receiver_Idoc_to_SE1CLNT500
Hope this helps someone
/Otto Frost /Capgemini

Hi ,
Create a technical system and bussienss system of type WEB AS ABAP and use this bussiness system for source system in XI and try it.
Thanks & Regards,
Sekhar

SAP Three-System Landscape

Hi All,
I have a very basic doubt - I have read umpteen times that the SAP recommendation is to use a 3-system landscape for performance reasons. One system for the developement, one for quality assurance and one for the production environment.
However, I want more clarity on what a 'system' is. Does it mean I purchase 3 mySAP ERP licenses for my implementation and then implement DEV, QAS and PRD in each of them? But would that not multiple my costs 3 times if I decide to move from legacy system to an SAP implementation?
Thanks and Regards,
Vidya.

Srividya D. wrote:>
> Yes, all clients in a single SAP software get affected if any client-independent customizing. So do you mean by having different hardware systems for the different logical systems (DEV, QAS, PRD) client-independent customizing in one client in one hardware system does not affect another client in another hardware system? But I don't quite understand this since the concept of a client is per SAP system and not hardware system.
Yes. exactly if the system are different then any config/changes will not going to affect another system until unless you move any transport. Client is a buisness unit to identify the Buisness data, It is system specific.
> By an instance if you mean an SAP Application Server, though there are multiple application servers on multiple hardware systems, the underlying Repository (nothing but database) and client-independent data should still be common right? Or do you mean that if I implement 3 instances of the SAP ERP system over 3 hardware systems, each instance or application server then has its own client space which do not interfere with the clients in the other hardware system?
I mean to say you required 3 Hardware, for 3 Database, and 3 SAP instance, 1:1 concept. everything will be seperate and will not interfare with any other system.
Regards,
Subhash

System Landscape Directory server not started

Hi,
We are running Solution Manager 4.0 SP13.
When I log ito the NWA get the message : System Landscape Directory server not started
We are trying to configure CEN but only the Local System can be administered.
If I goto the Central SLD and login - Administration - Server Started.
If I look at the ABAP - Transaction SLDAPICUST - save configuration - all ok
I goto the Jco Connectors and ensure all Jco Connections are configured: SAPSLDAPI_SID
ABAP RFCs; All configured
ABAP - Transaction - sldcheck .. it returns with success.
I login to the ABAP stack - smgw - logged in clients and all Jco Connections are available
I go into the J2ee Admin - navigate to the SLD Data supplier - all tests return success.
The SLD CIM is version 1.5.20
The application com.sap.engine.class.download is started ( Note 1017526 )
However when I login to with the J2ee_admin tool the following is missing from the CIM Client:
sap.com/tclmwebadminmainframewd/webdynpro/public/lib/app.jar
sap.com/tclmwebadminsldwd/webdynpro/public/lib/app.jar
Please help.

Hi Anand,
I verified the SLD Post Processing doc in case I missed something. The doc I used:
https://websmp106.sap-ag.de/~sapidb/011000358700003772372006E
I went through every point in the doc and verified that it was completed .
If I open Monitoring Setup Guide for SAP NetWeaver 7.0 SP Stack 12 ( Can't find 13 ) I go to page 68 :
6.5.2. Configuring the Connection Between CEN and the SLD ... I have followed all the steps without any error.:
I followed it Step-by-Step.... however the following CIM Client Genearations do not exist:
sap.com/tclmwebadminmainframewd/webdynpro/public/lib/app.jar
sap.com/tclmwebadminsldwd/webdynpro/public/lib/app.jar
What is available and Activated :
sap.com/tclmwebadminmainframewd/webdynpro/public/lib/sap.comtclmwebadminmainframe~wd.jar
sap.com/tclmwebadminsldwd/webdynpro/public/lib/sap.comtclmwebadminsld~wd.jar
I alos Decided for the purpose of Troubleshooting to Activate All:
sap.com/tclmwebadmin~mainframe.......
sap.com/tclmwebadmin~sld..........
When I go into NWA .. its still says SLD Not started.
If I go inot the J2ee Admin Tool - SLD Data Supplier - Trigger Data Transfer OK
I goto the SLD - Administration . SLD Started
I Can see all the Techinical systems - ABAP and Java.
All business Systems are there
SLDCHECK works fine .. no errors !
But I can't change the status of the NWA System Landscape Selectipon From Local to Central.
Warning / Error :
System Landscape Directory server not started
and
Only local system can be administered
I maybe missing something but I can't see what it is....
Further Help required !

System Landscape Directory: HTTP response code: 403 (Forbidden)

Hi,
After upgrading PI 7.1 (with local SLD) Stack06 -> Stack09 we have the following error in the runtime workbench. It seems that the connection
between PI and SLD is not working:
1) error in RWB -
Error during communication with System Landscape Directory: HTTP response code: 403 (Forbidden)
2) another error:
8 Message(s) : SLD agent unable to specify domain - Error class com.sap.aii.rwb.exceptions.BuildLandscapeException: Error during communication with System Landscape Directory: HTTP response code: 403 (Forbidden) - Attempt to create JCo connection object failed for domain domain.00.hfasapxi1 - Integration Server unable to specify a JCo client - No component names available from Integration Server - SLD agent unable to specify domain - Error class com.sap.aii.rwb.exceptions.BuildLandscapeException: Error during communication with System Landscape Directory: HTTP response code: 403 (Forbidden) - Attempt to create JCo connection object failed for domain domain.00.hfasapxi1
3) in the sld:
INFO com.sap.sld.api.builder.app.DefineHostedSystem: Communication exception in SLD ping (HTTP 403 = FORBIDDEN): http://hfasapxi1:50000/sld/cimom, namespace sld/active.
sldcheck is working and the users are not locked or not valid. All seems to be ok but I still get these errors.
Any idea ?
Dimitry Haritonov

Hi Venu,
thanks for the answer but it seems to be something else. After searching for that problem I also ran the configuration wizard->PI self registration. This activity registers all the component of the PI, unfortunately it only registered the "integration server" part without the Adapter engine, domain, RWB and etc.
Also, when I trigger the registration of the adapter engine I get the following error in the default trace:
The AdatperEngine has not been registered with the SLD due to: com.sap.aii.af.lib.sld.SLDException: Could not register AdapterFramework to SLD. Reason: Self-registration of instance af.xid.hfasapxi1 of class SAP_XIAdapterFramework failed
the reason is unknown ... any idea ?
Dimitry Haritonov

System landscape clients

Similar Messages

Maybe you are looking for