System Landscape SMSY 4 minutes loading

Hi,
we have a very long loading time when we choose Transaktion SMSY - Landscapecomponents -System
This text ist shown:
Search landscape for system for product: 3I MW
The search takes 5 minutes !
How can I solve this problem?
regards
steven

this is the duration on our System..
11:08:45.920         5 SAPLSDNT DD092526V  REOPEN  115                   0 R/3   SELECT WHERE "TABNAME" = 'TREEV_NODE' AND "BUFALLOW" = 'X' AND ROWNUM <= 1
11:08:45.920       147 SAPLSDNT DD092526V  FETCH   115      1     0   1403 R/3
11:08:45.921         7 SAPLSDI  DDFTX      OPEN                          0       R 60 TREEV_NODE
How many Systems do you have on your SolMan?
How is your hardware sized?
Do you see any bottleneck in ST06? (OS(
Do you see any bottleneck in ST04? (DB)
Do you have any Workprocesses? (SM50)
Does the Workproccesses needs a lot of Roll In and Roll Out..?
Nesimi

Similar Messages

  • How to add Business Objects to system landscape smsy?

    Hi there,
    at the moment I configure the system landscape (smsy) in our solution manager. We have also BO XI 3.1 installations and I like to add them to the landscape. In transaction smsy I'm going to "Landscape components" -> "Product System" -> "Create New Product System" .. But now I'm not sure about the product and the product version.
    Any idea?
    Thanks and have a nice weekend,
    Max

    Hello,
    You may want to review  SAP Note 1507629   Preparing a BOE system for Service Sessions in Sol. Manager
    There are two PDF files EGI_SBOP_EWA_Part1.pdf and EGI_SBOP_EWA_Part2.pdf attached.
    They show how to define the system in SMSY.
    Additionally you will need Note  1357901 CA: Managed System Setup for SAP BusinessObjects Enterprise
    Because this is how the data will be collected.
    And lastly once you have setup the managed system and setup  the entries in SMSY, you then can create an EWA.
    Hope this helps you out.
    Regards,
    Paul

  • Solution manager system landscape(SMSY) configuraion

    Can any one help me how to add the r3servers in solution manager landscape.Also plz tell me the Logical component creation is needed for this one.

    Hi Vikas,
    The following location has the SAP tutor file for System Creation.
    https://websmp207.sap-ag.de/~sapidb/011000358700000894082006E.sim
    The followinglocation has logical component creation steps as a tutor file.
    https://websmp207.sap-ag.de/~sapidb/011000358700004860082004E.sim
    Please check for any further details at Service market place in soltion manager space.
    This should solve your issues in SMSY. Also let us know in case of any specific issues.
    Br,
    Sri
    (Your Points drive us)
    Message was edited by: Sri Raghu Kishore Pusapati

  • SOLMAN 4.0 SR2 connect to SAP R/3 Three System landscape (DEV QA and PRD)

    Hi,
    We have successfully installed SOLMAN 4.0 SR2 (ABAP + JAVA) on
    WIN2003 SP2 EE MSSQL 2005 EE SP1.
    I just want to activate the service so that SOLMAN could see my existing SAP R/3 4.6 C Three system landscape (DEV QAS PRD).
    I heard settings should be done on SPRO IMG configs. Could anyone tell me the exact procedure to navigate on it. I see a lot of buttons to config and execute, Just want to make sure everything will be in order.
    My SLD is directly installed locally on my SOLMAN server.
    Thanks,
    Simoun

    Hello Simoun,
    Telling from your last sentence I assume that you would like to connect SolMan (transaction SMSY) to your locally installed SLD or in other words: replicate SLD system data into SOLMAN system landscape SMSY.
    Please check this document:
    http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000538663&_SCENARIO=01100035870000000202&_OBJECT=011000358700000530282007E
    Here you find information covering prerequisites, required SAP Solution Manager IMG configuration to connect SLD and SMSY and frequently ask questions (FAQ-like).
    I hope this helps you to get started.
    Regards,
    Doreen

  • How to remove duplicate server entries in System Landscape

    Hi there, in our SSM 4.0 system landscape (SMSY), there are duplicate server entries (one in lowercase, the other in uppercase). How do you remove the duplicate entries, as whenever you try to delete, say, the uppercase server entry, the system tells you that it is being used in a solution etc? Thus, even though the server entries are in different cases, it still views them as the same server entry, and you cannot delete one or the other.

    Hello Bernardt,
    In smsy there is an icon "Where is used".
    I suppose you speak about a server that has been created in lowercase and again in uppercase. Until you don´t "clean" logical component, project, solution you are not going to be able to delete the entry.
    At least usually I follow this path. I don´t think there is a most "automatic" way, but who knows
    Best regards,
    Dolores

  • First RFC call failed, config not loaded. Check the System landscape configuration.

    Dear Experts,
    We are getting below error on portal while using the BEX query in BI system.
    Error:
    BEx Web Application
    Error: First RFC call failed, config not loaded. Check the System landscape configuration.
    Exception occurred while processing the current request; this exception cannot be handled by the application or framework
    Failed to process request; contact your system administrator
    To facilitate analysis of the problem, keep a copy of this error page
    We are sorry for the inconvenience.
    As the ITS & WEB AS connection tests go successful on object created for BI system in portal.
    Kindly suggest me on this issue..
    Thanks,
    Bharath.

    Hi Bharath,
    Please go through the below SAP Note and let me know if this helps.
    1903392 - Error: First RFC call failed, config not loaded
    BR,
    Anurag

  • Unable to create a system in SMSY

    Hi Experts,
          I am facing a problem to create a system in SMSY transaction.Currently we are using Solution manger 7.0 EHP1 SP19.
    When am trying to create a system in SMSY  all the required feilds got enabled except installation number.The installation number field got disabled.So,that we are unable to move forward.
    Please sugget me..
    Thanks&Regards,
    Sanam Apparao

    Hi,
    First create the 3 RFC required with satellite then you can run the following wizard to fetch the details
    https://websmp207.sap-ag.de/~sapidb/011000358700000894082006E.sim
    Later you can fetch the rest details goto landscape components  system  then on the right side
    by clicking refresh Read System Data Remote button.
    Hope it solves ur problem
    Regards
    Prakhar

  • How define ECC 6.0 system in smsy? Solution Manager 7.0 SP15

    Hi Colleagues,
    I have to define ECC 6.0 in my Solution Manager 7.0 SP15.
    At smsy transaction -> Landscape Components -> Systems I don't find name SAP ECC to create new system. So I created it on SAP ERP.
    My problem is when I go to create a logical component to assign my ECC system. So I go to transaction smst-> System Groups and Logical Components -> Logical components -> SAP ECC -> SAP ECC Server, I've created a Z New logical componets and at the right frame I am not able to assign my define system under SAP ERP. I get a pop-up "No system found for this product/main instance".
    Please could you help me?
    Thanks and Regards
    Raul

    Hi,
    The problem is solved.
    When I defined the system in smsy transaction, I made a mistake because I define it like a ERP 2005 and not a ECC 6.0, so in the next step when I want include this new system in a ECC 6.0 logical group, it wasn't able to find any ECC 6.0 system defined.
    Thanks, René for your reply.
    Regards

  • ChaRM: 4-System-Landscape possible?

    Hello,
    regarding our system landscape we have no clue how ChaRM will handle following situation
    DEV-System: Development-System were the developments should be done.
    QAS-System: Test-System were the tests should be done.
    FNC-System: nothing to do here, just for functional tests
    PRD-System: Production System
    Transport routes are DEV -> transport group which deliveres QAS and FNC, and from QAS -> PRD.
    What needs to be done to set this up correctly for ChaRM (e.g.: SMSY-logical components)?
    Thanks in advance.

    Hi
    You have two options:
    1) assign FNC to task list: you can start the import to this system in the task list manually
    2) or task list without FNC: you can schedule a job 'import all' at FNC or import manually via STMS
    Confiiguration:
    1) One log. component with D-Q-FNC-P (Q and FNC are of role target systems)
    2) One log. component with D-Q-P
    regards
    Andy

  • No ABAP technical systems in SMSY

    Hello,
    I've just set up a new Solution Manager Ehp1 and patched it to SPS23. In my SLD, I have two ABAP technical systems. However, I don't see them in SMSY. The associated product systems are present (one SAP ERP, the other SM itself).
    I've tried to schedule a fetch from the SLD in Setup System Landscape maintenance from the SMSY menu and it doesn't show any errors. In addition, per note 1468559, I've run SMSY_FETCH_SYSTEM_UPDATE for a single system. Returns success but no technical systems.
    If I try to create the technical systems manually in SMSY, there is no entry in the system type list for ABAP (I don't know if there should be or not, so even just confirming that it should exist would be helpful).
    Any ideas on what else I can check to solve this issue?
    Thanks.
    Rob

    Hi Rob,
    The technical system maintanence in SMSY is not relevant for ABAP systems.
    Technical system maintanence is required for non-ABAP systems like Java, TREX, MDM etc.
    Check the Landscape setup guide for more details:
    https://service.sap.com/~sapdownload/011000358700000074392009E/SP18_SolMan_Setup_Guide_V2.pdf
    Regards,
    Srikishan

  • [Integration Engine Configuration Data] Error: No access to system landscap

    Hi all,
    When configuring Integration Engine Data (To go to 'Integration Engine Configuration Data' screen: Tcode: SXMB_ADM -> Choose: Integration Engine Configuration -> F8), we want to load Configuration from System Lanscape by choose F6, an error occur with message as below:
    No access to system landscap
    So that we can't load configuration from our System Landscape.
    We have correctly configured other below:
         - We use http port for corresponding Integration Server.
         - Business System with role 'Integration Server' created correctly in SLD.
         - T-code SLDCHECK is all OK.
         - T-code SXI_CACHE is all OK.
    Anyone can please help me correct this error ?
    Point will be reward for any valuable answer,
    Thanks a lot,
    Vinh Vo

    Please can you check if your RFC destination SAPSLDAPI and LCRSAPRFC are working both ABAP and Java stack.
    just check the reply from Udo and jai's reply
    R3 Connecte XI 3.0  Problem
    also check page no 18
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/bd5950ff-0701-0010-a5bc-86d45fd52283

  • System Landscape : Corresponding Integration server not maintained

    Hi Guys,
    In ECC, SXMB_ADM - > Integration Engine Configuration
    Edit ->Change Global Configuration data
    System Landscape tab...
    It shows  System Landscape : Corresponding Integration server not maintained
    I have maintained the corresponding integration server in the SLD where in the business I created for ECC,
    I put the business system that I have created for Integration server
    Yet The error persists...any idea?
    Regards,
    Teja

    Hi Guys,
    I have done all the setting suggested,,
    then came across a thread on the forum
    Unable to load Integration Server data from SLD
    Regarding the System Landscape button in transaction sxmb_adm -> Integration Engine Configuration,
    this button is obsolete and no longer works correctly. You can ignore the error message you get.
    Thanks,
    Teja

  • Client Roles in a Three System Landscape

    I initially post this Question in other forum:
    Hi all,
    We have a three system landscape. In the Development client, we have the Customizing Client, the Sandbox Cliet and a Training client. I have some questions about this configuration:
    Acording to System and Client Settings - System Administration Assistant (BC-RRR) - SAP Library, Training client must be in Quality Assurance System, and it must be created by client copy from client QTST (it gets the transports from Custimizing). In this Training System we must create users for all our key-users to training. We must not create any user for key-users in sandbox client (this client is for the DEV team). is that ok?
    What are the downsides of having out TRAINING client in the Development System?
    Now, a consultant is asking me to open some modifications in the TRAINING client: He needs to load Exchange rates (OB08) in that client, but he is getting "Client is not modifiable". They are asking me to create users for key-users in the sandbox client and the training client.
    I need to know if they are using the system in the right way. I dont want the system to become a mess.
    I been reading this notes: SAP Note 356483. I don´t know what this means: "Now the corresponding Customizing object is no longer subject to the transport connection and is excluded from the changeability check. The change is active in all clients of the system. You can also change the Customizing object in a locked client (independent of the client role). However, now it is also no longer possible to manually transport entries of the view or table."
    Aditional notes:
    SAP Note 78329,  sap kb 356483
    Thanks for your help!
    One person answere me this:
    Hi
    You should create your question in the appropriate area :
    Software Logistics
    The drawback of having training client in dev system is that it could be negatively impacted by ongoing changes performed in that system (custom program that are changed, not working...)
    Some specific customizing changes can be set as current setting and thus can be modified without needing to open customizing but only if the client is set as productive.
    There is also a way do deactivate modification recording of objects (aka deactivating the transport connection) but, if you apply this change for this activity/object, you won't be able any more to record change into transport orders
    Regards
    356483 - Customizing: Current settings in the test system
    77430 - Customizing: Current settings

    Hi Andres
    I do not really now the exact impact, it might prevent some business data from being mass processed or overwritten...
    I did had to deactivate the transport connection on specific objects/activities for some customers.
    It depends on the frequency of that activity. I don't like to open the client to modification as you can sometime forget to close it back, and sometime also it gave the opportunity to other consultants to make changes that would create inconsistency among envt in the whole landscape.
    At least activating the recording of changes could help in tracking the source of modifications
    RZ10 => rec/client=ALL
    STMS => RECCLIENT=ALL
    Regards

  • What is the Three System Landscape in SAP

    Hi All,
    Please explain me What is the Three system Landscape in SAP.
    Thank you very much,
    Kavya.

    1.  Database Layer
    The database layer consists of a central database system containing all of the data in the R/3 System. The database system has two components - the database management system (DBMS), and the databse itself. SAP does not manufacture its own database. Instead, the R/3 System supports the following database systems from other suppliers: ADABAS D, DB2/400 (on AS/400), DB2/Common Server, DB2/MVS,INFORMIX, Microsoft SQL Server, ORACLE, and
    ORACLE Parallel Server. The database does not only contain the master data and transaction data from your business applications, all data for the entire R/3 System is stored there. For example, the database contains the control and Customizing data that determine how your R/3 System runs. It also contains the program code for your applications. Applications consist of program code, screen
    definitions, menus, function modules, and various other components. These are stored in a special section of the database called the R/3 Repository, and are accordingly called Repository objects. You work with them in the ABAP Workbench.
    2.  Application Layer
    The application layer consists of one or more application servers and a message server. Each application server contains a set of services used to run the R/3 System. Theoretically, you only need one application server to run an R/3 System. In practice, the services are distributed across more than one application server. This means that not all application servers will provide the full  range of services. The message server is responsible for communication between the application servers. It passes requests from one application server to another within the system. It also contains information about application server groups and the current load balancing within them.  It uses this information to choose an appropriate server when a user logs onto the system.
    3.  Presentation Layer
    The presentation layer contains the software components that make up the SAPgui (graphical user interface). This layer is the interface between the R/3 System and its users. The R/3 System uses the SAPgui to provide an intuitive graphical user interface for entering and displaying data.  The presentation layer sends the user’s input to the application server, and receives data for display from it. While a SAPgui component is running, it remains linked to a user’s terminal
    session in the R/3 System.
    REWARD POINTS IF HELPFUL
    Message was edited by:
            vijay kamath

  • BDLS: Partner profiles not change - System Landscape Copy (SRM+HCM+ERP)

    Hello,
    Can anybody help me for system copy i.e. production to quality.
    System Landscape:
    - 1 central HCM System
    - 1 central SRM System
    - 6 Backend Systems (ERP)
    Problem: Change Log. Systemnames (SALE) and Partner Profiles (WE20) and ALE-Distribution Model (BD64).
    We run BDLS (change RFC/log.Systemnames/ change BD64), but we have problems with Partner Profiles (WE20). Which do not change !
    Anybody knows this problem?
    What can I do?
    Thanks, Silke

    Running BDLS would not normally revert the setting for the partner profiles. You could either load it again via backup transport or make new entries accordingly to the specific settings prior to the system copy.

Maybe you are looking for