System not starting up

Hi there on planet earth,
I've got problem with my G4 server Mac.
Every morning sisnce last week I get a strange note on my screen:
System failure: CPU 0
code=00000001 (corrupt stack)
latest crush for cpu 0:
Exception state (SU=0X29DA6000)
Proceeding via exception chain
Exception state (SU=0X29DA6000)
Kernel Version 7.9.0
Waiting for remote debugge connection.
==================
Had anyone problem like that?
It starts up fine after rebooting.
I'm just afraid that it may cause some future problems...
I's appreciate any feedback.
thanks
Mike

Hi,
possible network problems detected - check tracefile and adjust the DNS settings
Looks like you have some network connectivity problem. Check your network connectivity. If it is loopback adapter check the settings.
Manoj

Similar Messages

System not started after installing grid control

HI,
I have installed grid control 10.2.0.1 on 11g r2 on rhel5.After installing grid control, whenever system get booted, it got hanged and saying
after starting up the listener
sql>ora-01078: failure in processing system parameters
LRM-00109:could not open parameter file '/raczone/init%s_reposSID.ora'
sql>disconnectdfailed
opmnctl:starting opmn and all managed process...
CRS-4124: oracle high availability services startup
crs-4000:command start failed, or completed with errors>

Hi,
Thanks for the reply!!!
I have installed 11g grid infra on 2 nodes and then try to install 10g grid control on node 1 but when i am booting my system it got hanged and throw an error:
sql>ora-01078: failure in processing system parameter
LRM-00109:could not open parameter file '/raczone/init%s_reposSID.ora'
sql>disconnectdfailed
opmnctl:starting opmn and all managed process...
CRS-4124: oracle high availability services startup
crs-4000:command start failed, or completed with errors>
then i have to forcefully bring down the system and started the linux in a single user mode and thereover i have to move or rename the dir to some other location,then only system get started.after starting up the system i have to again move or rename the grid control dir to org location.
So my question is which file or dir is forcing system to startup the grid control on boot?

A4H and HDB systems not starting in SAP MMC for BW on HANA trial

Hi,
I followed all the steps to create an account in AWS and activate a trial version of SAP BW 7.4 on HANA and SAP BO 4.1. The instance activated correctly in the SAP CAL with a green status. The instance was created in the region us-east-1c. I am currently in Australia.
But when I logon with the remote desktop, and go to the SAP MMC, I see that the A4H and HDB systems have not started and are not green. When I try to start them manually I get the error below. Please help. My SDN userid is P052405.

Hi All,
The error was fixed after I rebooted the instance in the SAP CAL.

SAP system not starting or not able to logon to SAP system

Hi All,
Our OS is AIX5.3
DB is Oracle 10.2
And the machine is in cluster for HA. Cluster is running fine.
I am starting SAP using startsap all, the command shows that database and all instances have been started successfully. But we are not able to logon to the system.
Following is the output of startsap command and dpmon command :
bash-3.00$ startsap all
Checking ARP Database
ABAP Database is not available via R3trans
Starting SAP-Collector Daemon
14:45:38 11.10.2008   LOG: Effective User Id is root
This is Saposcol Version COLL 20.95 700 - AIX v11.15 5L-64 bit 080317
Usage: saposcol -l: Start OS Collector
        saposcol -k: Stop OS Collector
        saposcol -d: OS Collector Dialog Mode
        saposcol -s: OS Collector Status
The OS Collector (PID 286752) is already running .....
saposcol already running
Running /usr/sap/ARP/SYS/exe/run/startdb
Trying to start ARP database ...
Log file: /home/arpadm/startdb.log
ARP database started
/usr/sap/ARP/SYS/exe/run/startdb completed successfully
Starting SAP Instance ASCS00
Startup-Log is written to /home/arpadm/startsap_ASCS00.log
Instance Service on host sapprodail started
Instance on host sapprodail started
Starting SAP Instance DVEBMGS01
Startup-Log is written to /home/arpadm/startsap_DVEBMGS01.log
Instance Service on host sapprodail started
Instance on host sapprodail started
bash-3.00$
bash-3.00$ dpmon
dpmon=>sapparam(1c): No Profile used.
dpmon=>sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
DpMonInit failed - possibly no dispatcher running
DpMon: External/Internal dplib version: 110/237
bash-3.00$
Developer trace out put is as follows
trc file: "dev_disp.new", trc level: 1, release: "700"
sysno      01
sid        ARP
systemid   324 (IBM RS/6000 with AIX)
relno      7000
patchlevel 0
patchno    159
intno      20050900
make:      single threaded, Unicode, 64 bit, optimized
pid        295220
Sat Oct 11 14:46:22 2008
kernel runs with dp version 237000(ext=110000) (@(#) DPLIB-INT-VERSION-237000-UC)
length of sys_adm_ext is 576 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 295220) [dpxxdisp.c   1254]
        shared lib "dw_xml.so" version 159 successfully loaded
        shared lib "dw_xtc.so" version 159 successfully loaded
        shared lib "dw_stl.so" version 159 successfully loaded
        shared lib "dw_gui.so" version 159 successfully loaded
        shared lib "dw_mdm.so" version 159 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3900
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
DpIPCInit2: start server >sapprodail_ARP_01                       <
DpShMCreate: sizeof(wp_adm)             19200   (1600)
DpShMCreate: sizeof(tm_adm)             5941560 (29560)
DpShMCreate: sizeof(wp_ca_adm)          24000   (80)
DpShMCreate: sizeof(appc_ca_adm)        8000    (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/548056/548064
DpShMCreate: sizeof(comm_adm)           548064 (1088)
DpSlockTableSize: max/headSize/ftSize/fiSize/tableSize=0/0/0/0/0
DpShMCreate: sizeof(slock_adm)          0       (104)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)           0       (72)
DpShMCreate: sizeof(vmc_adm)            0       (1864)
DpShMCreate: sizeof(wall_adm)           (40056/36728/64/192)
DpShMCreate: sizeof(gw_adm)     48
DpShMCreate: SHM_DP_ADM_KEY             (addr: 0x700000000126000, size: 6626392)
DpShMCreate: allocated sys_adm at 0x700000000126000
DpShMCreate: allocated wp_adm at 0x7000000001280f8
DpShMCreate: allocated tm_adm_list at 0x70000000012cbf8
DpShMCreate: allocated tm_adm at 0x70000000012cc58
DpShMCreate: allocated wp_ca_adm at 0x7000000006d7590
DpShMCreate: allocated appc_ca_adm at 0x7000000006dd350
DpShMCreate: allocated comm_adm at 0x7000000006df290
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0x700000000764f70
DpShMCreate: allocated gw_adm at 0x700000000764ff0
dev_disp (58%)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm)           0       (72)
DpShMCreate: sizeof(vmc_adm)            0       (1864)
DpShMCreate: sizeof(wall_adm)           (40056/36728/64/192)
DpShMCreate: sizeof(gw_adm)     48
DpShMCreate: SHM_DP_ADM_KEY             (addr: 0x700000000126000, size: 6626392)
DpShMCreate: allocated sys_adm at 0x700000000126000
DpShMCreate: allocated wp_adm at 0x7000000001280f8
DpShMCreate: allocated tm_adm_list at 0x70000000012cbf8
DpShMCreate: allocated tm_adm at 0x70000000012cc58
DpShMCreate: allocated wp_ca_adm at 0x7000000006d7590
DpShMCreate: allocated appc_ca_adm at 0x7000000006dd350
DpShMCreate: allocated comm_adm at 0x7000000006df290
DpShMCreate: system runs without slock table
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 0x700000000764f70
DpShMCreate: allocated gw_adm at 0x700000000764ff0
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 0x700000000765020
DpShMCreate: allocated wall_adm at 0x700000000765028
MBUF state OFF
DpCommInitTable: init table for 500 entries
rdisp/queue_size_check_value : -> off
ThTaskStatus: rdisp/reset_online_during_debug 0
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 4096 kByte.
Using implementation std
<ES> Info: use normal pages (no huge table support available)
EsStdUnamFileMapInit: ES base = 0x0x700000030000000
EsStdInit: Extended Memory 4092 MB allocated
<ES> 1022 blocks reserved for free list.
ES initialized.
WLM Tag 'ARP/DSP' successfully set for this process
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c   1656]
***LOG Q0K=> DpMsAttach, mscon ( sapprodail) [dpxxdisp.c   11937]
DpStartStopMsg: send start message (myname is >sapprodail_ARP_01                       <)
DpStartStopMsg: start msg sent to message server o.k.
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: Checking Downtime Configuration of Monitoring Segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c   1050]
DpMsgAdmin: Set patchno for this platform to 159
Release check o.K.
Sat Oct 11 14:46:32 2008
MBUF state ACTIVE
DpModState: change server state from STARTING to ACTIVE
Please help me step by step to solve this problem.
Regards
Edited by: Infoseek Sap123 on Oct 12, 2008 8:22 AM

The command is
dpmon pf=/usr/sap/SID/SYS/profile/<profile>
Regards

System not starting after Unicode conversion:R3trans fails

Hello
We are performing a Unicode upgrade on an ECC 5.0 system. The ECC 5.0
is a MDMP System. After completing Unicode preparatory activities, we
have started to perform a system export using SAPINST. Export completed
successful.
We started with the system import using SAPINST.
The database load phase completed. Update statistics phase is in
progress on SAPinst.
In the meanwhile we did a check of R3Trans check we observe:
R3Trans u2013x is successful.
But, R3Trans u2013d fails with the error below.
u201CThis is R3trans version 6.13 (release 640 - 17.02.10 - 13:07:00).
unicode enabled version
2EETW000 I have some problems during TADIR access.
R3trans finished (0008).u201D
Thanks

Workprocess Log
======================
M *****************************************************************************
M *
M * LOCATION    SAP-Server i3lbwvbw1_BI7_00 on host i3lbwvbw1 (wp 1)
M * ERROR       ThInit: db_connect
M *
M * TIME        Wed Mar 16 13:17:05 2011
M * RELEASE     701
M * COMPONENT   Taskhandler
M * VERSION     1
M * RC          13
M * MODULE      thxxhead.c
M * LINE        10916
M * COUNTER     1
M *
M *****************************************************************************
M
M PfStatDisconnect: disconnect statistics
M Entering TH_CALLHOOKS
M ThCallHooks: call hook >BtcCallLgCl< for event BEFORE_DUMP
M ThCallHooks: call hook >ThrSaveSPAFields< for event BEFORE_DUMP
M *** ERROR => ThrSaveSPAFields: no valid thr_wpadm [thxxrun1.c   730]
M *** ERROR => ThCallHooks: event handler ThrSaveSPAFields for event BEFORE_DUMP failed [thxxtool3.c 262]
M Entering ThSetStatError
M ThIErrHandle: do not call ThrCoreInfo (no_core_info=0, in_dynp_env=0)
M Entering ThReadDetachMode
M call ThrShutDown (1)...
B dbtbxbuf: Buffer TBX_SINGLE not available
M ***LOG Q02=> wp_halt, WPStop (Workproc 1 3900) [dpnttool.c   334]
============================

Shadow system not started due to memory

Dear All,
We are doing EHP7 upgrade and using SUM 1.0 sp 10 lmt 8
We faced an issue in preprocessing phase while SUM tries to start shadow system.
Shadow system failed to start> after checking logs at /SUM/abap/system/SID/DVEBMGS/work
it was found that shadow system was trying to allocate 210 gb of space to em_initial_size_MB. System gets crashed with core dump.
it was then fixed after i maintained the parameter em_initial_size_mb in shadow's system instance profile to 16384 and tried to start. it started up.
We never faced this issue with our other system while doing ehp6 as well. is it a bug with SUM 1.0 sp10 lmt8 which doesn't put the parameter in shadow profile.
error in dev_w0
*** ERROR => shmget(18806,34623979520,2016) (22: Invalid argument) [shmux.c
1524]
regards,
Devender Goyal.

Hi,
Seems like a bug with the SUM 1.0 SP09. Refer thread SUM 1.0 SP09: Shadow instance assigns too much memory
Manually changing the parameter might be the solution available.
Regards,
Srikishan

Solman system not coming up after Kerbel upgrade

Hi All,
We are not able to bring the system up after kernel upgrade on our Solution Manager Development system.We were trying to upgrade kernel from 32 to 94.
Solman is on Netweaver 7.0 EHP1
We are having our Opearting Sytem as AIX 5.3
Our database is DB2 version 9.1.5
DB2 is installed on Mainframe.
Please find logs of R3trans below
As per the error we found that SAPCL is not installed (Note 1236755), but further analysis we found that SAPCL & Kernel Upgrade are independent of each other.
Can Restarting the DB2 database help on this issue?
Regards
Shailesh
Error from R3 trans Log
=================================================================================================
4 ETW000 [dbdb2cli    ,00000] *** ERROR => DB2 Call 'CLI_EXECUTE' Error: sqlcode = -204 : [IBM][CLI Driver][DB2] SQL0204N "SAPASJ4.DB2QWPT2P" is an undefined name. SQLSTATE=42704
4 ETW000                                                                           40638 0.470875
4 ETW000 [dev trc     ,00000] Monitor for DB2 system not started. Retrieving EBCDIC CCSID from SYSIBM.SYSSTRINGS.
4 ETW000                                                                              42 0.470917
4 ETW000 [dbsldb2.    ,00000] *** ERROR => Retrieving EBCDIC CCSID from SYSIBM.SYSSTRINGS failed. Assuming EBCDIC CCSID 500.
4 ETW000                                                                           38219 0.509136
4 ETW000 [dev trc     ,00000] EBCDIC CCSID calculated from SYSIBM.SYSSTRINGS is 500 .
===================================================================================================

Hi lababe,
Welcome to the BlackBerry Support Community.
If your BlackBerry® Curve™ 9360 smartphone is unable to be detected by a computer due to the reboot loop, please connect your BlackBerry smartphone without the battery inserted and try to reload the BlackBerry® Device Software. Once the software load has already started, reinsert the battery.
For further instructions, please see: How to force the detection of the BlackBerry smartphone using Application Loader. www.blackberry.com/btsc/KB10144
Please note: This process will remove all data from your BlackBerry smartphone.
Hope this helps.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

System PI 7.11 will not start because of R3INLPGM error

Dear experts,
our PI 7.11 sap system will not start on the backup machine. We have two AS/400 machines using IBM iCluster.
On the source node the PI system starts without any problems. If we switch over to the target node,
the PI system will not start. Only the two subsystems R3_<instance> were started and the SAPSTRSVR jobs
ran under QUSRWRK.
In the pool files from SAPSTART we found the following errors:
QPRINT:
R3<SID>400/R3INLPGM: Error occured setting gid to R3GROUP.
QPJOBLOG:
*NONE      Information                 XXXXXXX SAPINLPGM    XXXXXXX *STMT    SAPINLPGM   XXXXXXX *STMT
                                     From module . . . . . . . . :   O4TMKLIBIX
From procedure . . . . . . :   prtjoblA
Statement . . . . . . . . . :   15
To module . . . . . . . . . :   O4TMKLIBIX
To procedure . . . . . . . :   prtjoblA
Statement . . . . . . . . . :   15
Message . . . . :   SAPINLPGM: Error in ChangeGidToR3GROUP - check whether
                                     R3<SID>400/R3INLPGM is owned by QSECOFR using adopted authority
But the authority from all libs and objects are same as on the source machine.
Any idea?
Best regards,
Matthias

Hello Matthias,
Please log on as QSECOFR (or a user with SECOFR authority),
ADDLIBLE SAPXIP71
and run command
FIXSAPOWN SID(*NONE) DIR('/QSYS.LIB/R3XIP400.LIB/R3INLPGM.PGM')
Best regards,
B. Wolf

Firefox not starting after update to 3.6.11 from 3.6.10 on vista platform. XUL error report. Uninstall including removing mozilla items in regedit or system restore does not resolve issue. XUL error still reappears after reinstall ? in English

Problem exists on my HP C0mpaq 6720s , Vista operating system.
System restore, restored to version 3.6.3 instead of 3.6.10 . This did not start either. Previously, I used Revo Uninstaller Pro to remove all Mozilla items, checked regedit and removed all Mozilla folders, then reinstalled 3.6.11 from your website. Mozilla would not start and XUL error stated 1.9.2.10 followed by min 1.9.2.11 and max 1.9.2.11 . This was the same error report that appeared after the automatic update.
So I am at a loss and without Mozilla .

I have successfully resolved this issue on my PC by allowing updater.exe through the firewall. This updater.exe is located in the folder where your Mozilla Firefox was installed. The default folder is "C:\Program Files\Mozilla Firefox\updater.exe"
Happy Browsing.....

After removing system fonts and reinstalling fonts, FireFox will not start

After removing system fonts and reinstalling fonts, FireFox will not start! When I start FireFox the "Mozilla Crash Reporter" opens as if FF just crashed??? I don't see any records in event viewer. I am using FF v3.6.3 on a Windows 7 box. I tried uninstalling 3.6.3 and installing 3.0.18 and had the same problem!
== This happened ==
Every time Firefox opened
== After a uninstalled all fonts including system fonts and then reinstalling system fonts. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; GTB6.4; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; AskTB5.5)

The files with submitted crash report ids are inside the ''submitted '' directory, from the directory you found the LastCrash.txt timestamp file.
The file names will begin with '''bp-'''
There might be more information from the crash report, but it might just tell us you are crashing the first time Firefox tries to use a font.
One thing I suppose you could do is select only those fonts you've got in Tools -> Options -> Content -> Fonts and Colors -> Advanced and then uncheck the '''Allow pages to use their own fonts''' option.
See http://support.mozilla.com/en-US/kb/Options+window+-+Content+panel#Fonts_Dialog
To be honest, I can't find anything on this Netscape Font Navigator and it sounds highly dubious.

Safe mode did not start successfully. This page has encountered a critical error. Contact your system administrator if this problem persists.

Hi
I just now updated dec 2013 c.u to sharepoint server 2010 sp2
I get this error in event viewer when I browse web applications , they not open even
Load control template file /_controltemplates/TaxonomyPicker.ascx failed: Could not load type 'Microsoft.SharePoint.Portal.WebControls.TaxonomyPicker' from assembly 'Microsoft.SharePoint.Portal, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c'.
SharePoint Web Services Round Robin Service Load Balancer Event: EndpointFailure
Process Name: OWSTIMER
Process ID: 3836
AppDomain Name: DefaultDomain
AppDomain ID: 1
Service Application Uri: urn:schemas-microsoft-com:sharepoint:service:548f72e6a39f401e95e92711aea13c45#authority=urn:uuid:9aebe976322541d280e4bd3799fa283f&authority=https://spfwf01:32844/Topology/topology.svc
Active Endpoints: 2
Failed Endpoints:1
Safe mode did not start successfully. This page has encountered a critical error. Contact your system administrator if this problem persists.
adil

This messge I get initially I get two times (1)
SharePoint Web Services Round Robin Service Load Balancer Event: EndpointFailure
Process Name: w3wp
Process ID: 4600
AppDomain Name: /LM/W3SVC/2141356646/ROOT-1-130405218187772398
AppDomain ID: 2
Service Application Uri: urn:schemas-microsoft-com:sharepoint:service:548f72e6a39f401e95e92711aea13c45#authority=urn:uuid:9aebe976322541d280e4bd3799fa283f&authority=https://spfwf01:32844/Topology/topology.svc
Active Endpoints: 2
Failed Endpoints:1
Affected Endpoint: http://spfapp02:32843/548f72e6a39f401e95e92711aea13c45/MetadataWebService.svc
aftert this message three times (2)
The Managed Metadata Service 'Managed Metadata Service' is inaccessible.
and after (3)
The health service has removed some items from the send queue for management group "MOJOmanagement" since it exceeded the maximum allowed size of 15 megabytes.
after (4)
Safe mode did not start successfully. This page has encountered a critical error. Contact your system administrator if this problem persists.
and this time I seen I am unable to browse web applications
and
Load control template file /_controltemplates/TaxonomyPicker.ascx failed: Could not load type 'Microsoft.SharePoint.Portal.WebControls.TaxonomyPicker' from assembly 'Microsoft.SharePoint.Portal, Version=14.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c'.
adil

Error Message: "Skype can not start because the system is not available"

Try to reset all Skype settings. Quit Skype or use Windows Task Manager to kill any Skype.exe process. Go to Windows Start and in the Search/Run box type %appdata% and then press Enter or click the OK button. The Windows File Explorer will pop up. There locate a folder named “Skype”. Rename this folder to something different, e.g. Skype_old. Next go to Windows Start and in the Search/Run box type %temp%\skype and then press Enter or click the OK button. Delete the DbTemp folder. Restart Skype. N.B. If needed, you will still be able to re-establish your call and chat history. All data is still saved in the Skype_old folder.

Okay!
I'm newbie here, but it doesn't matter. I dont want to do here anything else, just write off my opinion about the Microsoft's "new" Skype, and I hope they will read...
This is a cropped image - of course hungarian, because I'm hungarian, but I think many of us could see this as well. How this is possible? "The Skype can not start because the system is not available" *** What kind of system? The Skype was on a P2P system, where is impossible that the system is not available! This is why the skype was much better than the Microsoft's messenger. Then they bought it, and make it wrong...
I found a solution for this problem, this can happen if my client is not updated. But IT IS!
How does it works? Can we use the **bleep** Skype how we would like to use? Or this time we need to find an other application (like Viber), and using that while they not buying that as well, just because that is better?
Edited to conform with the Community Guidelines
Subject/title edited to better reflect post content.

Can not start Messaging server in Sun Java System Messaging Server 6 2005Q1

Hi all,
I installed Sun Java System Messaging Server 6 2005Q1 from Solaris 10 DVD on Solaris 10.
After the installation, I got directory server, admin server running but messaging server not running. I can not start Messaging server (start smtp, http, pop, imap). I found in directory which I installed messaging server but I could not see script "start-msg" and "stop-msg".
# pwd
/opt/SUNWmsgsr/sbin
# ls
MoveUser ha_ip_config imquotacheck imsdirmig mkbackupdir
UpgradeMsg5toMsg6.pl hashdir imsbackup imsexport readership
configure imexpire imsconnutil imsimport reconstruct
control-params.txt iminitquota imscripter imsrestore relinker
deliver immonitor-access imsdaaci mboxutil useconfig
Any idea what might have gone wrong?
Thanks.

Thanks.
I have a problem when I configure the Messaging Server (by running the /opt/SUNWmsgsr/sbin/configure script):
Hostname mailtest for this machine is not a fully qualified domain name. Please
correct this before attempting to configure Messaging Server. Please make sure
that your DNS is working properly.
<Press ENTER to continue> {"<" goes back, "!" exits}
Can you help me fix this problem?
Thanks.

1)Could not start up os x 2)Only could start bootcamp 3)Tried resetting nvram 4)Could not start even in bootcamp 5)Verify disk says -. Verifying volume "Macintosh HD" Error: Live file system repair is not supported 6)Installed maverick on USB d

1) Could not start up os x
2) Only could start bootcamp
3) Tried resetting nvram
4) Could not start even in bootcamp
5) Verify disk says …. Verifying volume “Macintosh HD”
Error: Live file system repair is not supported
6) Installed maverick on USB drive
7) Boot from USB drive. Tried verifying HD: Volume header needs minor repair. The volume Recovery HD was found corrupt and needs to be repaired. Verifying volume “Macintosh HD”: Error: live file system repair is not supported.
8) The terminal code says
9) Last login: Wed Feb 11 14:09:47 on console
10) xxxx-MacBook:~ xxxx$ diskutil list
11) /dev/disk0
12) #: TYPE NAME SIZE       IDENTIFIER
13) 0:      GUID_partition_scheme *160.0 GB   disk0
14) 1: EFI EFI 209.7 MB   disk0s1
15) 2:                  Apple_HFS Macintosh HD            80.1 GB disk0s2
16) 3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
17) 4:       Microsoft Basic Data 50.0 GB    disk0s4
18) /dev/disk1
19) #: TYPE NAME SIZE       IDENTIFIER
20) 0:      GUID_partition_scheme *15.6 GB    disk1
21) 1: EFI EFI 209.7 MB   disk1s1
22) 2:                  Apple_HFS BOOT                    14.8 GB    disk1s2
23) 3:                 Apple_Boot Recovery HD             650.0 MB   disk1s3
24) Saeedehs-MacBook:~ saeedehmirbagheri$ diskutil cs list
25) No CoreStorage logical volume groups found
26) Saeedehs-MacBook:~ saeedehmirbagheri$ sudo gpt -vv -r show /dev/disk0
27) Password:
28) gpt show: /dev/disk0: mediasize=160041885696; sectorsize=512; blocks=312581808
29) gpt show: /dev/disk0: PMBR at sector 0
30) gpt show: /dev/disk0: Pri GPT at sector 1
31) gpt show: /dev/disk0: Sec GPT at sector 312581807
32) start       size index contents
33) 0          1 PMBR
34) 1          1 Pri GPT header
35) 2         32 Pri GPT table
36) 34          6
37) 40     409600      1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
38) 409640 156394528      2 GPT part - 48465300-0000-11AA-AA11-00306543ECAC
39) 156804168    1269544      3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
40) 158073712   56853648
41) 214927360   97652736      4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
42) 312580096       1679
43) 312581775         32         Sec GPT table
44) 312581807          1         Sec GPT header
45) xxxx-MacBook:~ xxxx$ sudo fdisk /dev/disk0
46) Disk: /dev/disk0 geometry: 19457/255/63 [312581808 sectors]
47) Signature: 0xAA55
48) Starting       Ending
49) #: id cyl hd sec - cyl hd sec [     start - size]
50) ------------------------------------------------------------------------

Thank you -
I booted from external USB. The diskutil list output is from OS x booting from the USB, which shows the following:
Saeedehs-MacBook:~ saeedehmirbagheri$ diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *160.0 GB   disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:                  Apple_HFS Macintosh HD            80.1 GB    disk0s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
   4:       Microsoft Basic Data                         50.0 GB    disk0s4
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *15.6 GB    disk1
   1:                        EFI EFI                     209.7 MB   disk1s1
   2:                  Apple_HFS BOOT                    14.8 GB    disk1s2
   3:                 Apple_Boot Recovery HD             650.0 MB   disk1s3
Saeedehs-MacBook:~ saeedehmirbagheri$ diskutil cs list
No CoreStorage logical volume groups found
I am not able to use target disk mode because I don't have firewire/thunderbolt ports.

The Sun Java System Application Server could not start

Hello All,
I downloaded the Java Pet Store example from sun's website and followed the instructions for installation. After successful installation, I tried to deploy the project and gave the following error
C:\Documents and Settings\sina\My Documents\Projects\services\nbproject\build-impl.xml:194: Deployment error:
The Sun Java System Application Server could not start.
More information about the cause is in the Server log file.
Possible reasons include:
- IDE timeout: refresh the server node to see if it's running now.
- Port conflicts. (use netstat -a to detect possible port numbers already used by the operating system.)
- Incorrect server configuration (domain.xml to be corrected manually)
- Corrupted Deployed Applications preventing the server to start.(This can be seen in the server.log file. In this case, domain.xml needs to be modified).
- Invalid installation location.
See the server log for details.
BUILD FAILED (total time: 5 minutes 20 seconds)
The link above points to the following line in the build-impl.xml file
<nbdeploy debugmode="false" forceRedeploy="${forceRedeploy}" clientUrlPart="${client.urlPart}" clientModuleUri="${client.module.uri}"/>
Can any one help whats wrong.An early response will be highly appreciated.
Kind Regards.
Hasnain Javed.

Hi,
Maybe you already got this fix but here is a suggestion, a snippet from the readme index,html of the petstore download
# Start the Sun Java System Application Server and the JavaDB database. To do so, open a command prompt and change directory to <javaeesdk.home>/bin and issue the following commands:
asadmin start-database
asadmin start-domain
# Change directory to <petstore.home> and enter the following commands
ant setup
ant run
This will setup, build and deploy the petstore on the application server, and then launch the application homepage in your default browser.
The "ant setup" that you run from <petstore.home> (petstore.home is the directory where petstore is installed or where you unzipped it) will populate the database wth data and setup the proper database tables etc that are used by the application.
hth,
Sean

System not starting up

Similar Messages

Maybe you are looking for