System Report shows two monitors on the same graphics card

I have just purchased a new Mac Pro (late 2013) with dual AMD FirePro D500s. I have two Dell 4K displays attached. No matter which ports I connect the monitors to, System Report shows that both displays are connected to the same D500. Does this mean that I am only using one of the graphics cards, or is one master and one slave?

By default, one GPU is setup for display duties while the other is used exclusively for GPU compute workloads. GPUs are notoriously bad at context switching, which can severely limit compute performance if the GPU also has to deal with the rendering workloads associated with display in a modern OS. NVIDIA sought to address a similar problem with their Maximus technology, combining Quadro and Tesla cards into a single system for display and compute.
from:
http://anandtech.com/show/7603/mac-pro-review-late-2013/9

Similar Messages

Is there a way to show two angles at the same time in the final edit rather than switch between them with Multicam?

Can I show two angles at the same time in the final edit rather than alternate with Multicam?

Stack two clips on top of each other and reduce the sizes. I think that's what you want.

I AM TRYING TO HOOK UP TWO MONITORS AT THE SAME TIME

I AM TRYING TO HOOK UP TWO MONITORS AT THE SAME TIME. I have had no success in figuring out why I can get an image on my TV and an image on my monitor (at the same time), but no icons, no start menu and no keyboard access. M y computer freezes as well when I try to do 2 monitors.

Hi,
Your machine has:
*Integrated video is not available if a graphics card is installed.
Radeon HD 6370D, 6410D, 6530D or 6550D Graphics (model dependent based on processor)
Supports PCI Express x16 graphics cards
Two DVI-D ports (Both ports can be used at the same time)
You can use TWO monitors with the right connections for two ports #3 above. You can get more information from the following instructions:
http://www.dummies.com/how-to/content/how-to-set-up-multiple-monitors-with-windows-7.html
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I have two videos on the same sd card. One will sync, the other won't. What gives?

Both are the same format, recorded within minutes of each other on the same type of camera. This is driving me crazy.

Did you give them different names?

Showing two grids at the same time...

Hi all,
i want to create an alv report in which i m using two internal tables and two field catalogs and the two function modules for display ....can any one tell me hw i put the logic ..
if its possible then plz give reference code for doing so...
Thanks & Regards
Ashu Singh.

Hi,
If you are using object oriented ALV.. then go through the followign code..
Here we are declaring two table controls in the custom contanier and displaying our required values.
It just shows how to display two field catalogs. But
the perform statements for felidcatalog and layout would be designed based on your requirement.
*&      Module STATUS_9000 OUTPUT
      text
MODULE STATUS_9000 OUTPUT.
IF GO_CUSTOM_CONTAINER_TEST1 IS INITIAL.
CREATE OBJECT GO_CUSTOM_CONTAINER_TEST1
EXPORTING
     CONTAINER_NAME              = ' TEST_CONTROL_!'
CREATE OBJECT GO_GRID_TEST1
EXPORTING
    I_PARENT          = GO_CUSTOM_CONTAINER_TEST1
ENDIF.
CREATE OBJECT test_double.
set HANDLER test_double->double_click_row for GO_GRID_TEST1.
PERFORM layout CHANGING gs_layout.
GO_GRID_TEST = GO_GRID_TEST1.
PERFORM field_catalog_test CHANGING gs_fcat_test.
" Perfrom statement to set the fieldcatalog.
PERFORM data_itable.
"A perform statement to fill the output table using select query etc.,
Perform table_first display.
IF GO_CUSTOM_CONTAINER_TEST2 is INITIAL.
CREATE OBJECT GO_CUSTOM_CONTAINER_TEST2
EXPORTING
    CONTAINER_NAME              = 'TEST_CONTROL_2'
ENDIF.
CREATE OBJECT GO_GRID_TEST2
EXPORTING
    I_PARENT          = GO_CUSTOM_CONTAINER_TEST2
ENDIF.
PERFORM layout CHANGING gs_layout.
GO_GRID_TEST = GO_GRID_TEST2.
PERFORM field_catalog_test CHANGING gs_fcat_test.
PERFORM data_itable1.
Perform table_first display.
ENDMODULE.                 " STATUS_9000 OUTPUT
form table_first_display.
CALL METHOD GO_GRID_TEST-> SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
    I_SAVE                        = 'A'
    IS_LAYOUT                     = GS_LAYOUT
CHANGING
     IT_OUTTAB                     = it_outtab[]
    IT_FIELDCATALOG           = it_fieldcatalog[]
ENDIF.
endform.
Regards,
Swarna Munukoti

Can I have the dock show up on all monitors at the same time

As the topic beckons ... is it possible to have the dock show up on all connected monitors at the same time ?
Currently I have a setup with 2 external monitors apart from the main iMac monitor. Both external monitors are connected via thunderbolt and I'm running MacOS 10.9.4.
I know I can get the dock to appear on any of the external monitors by hovering with the mouse on the secondary/tertiary monitors where the dock "should" be, after a few seconds the dock appears. However I'm looking to have the dock present at all times on all monitors, with each monitor running separate spaces, nothing mirrored or duplicated.
Thanks in advance.

If you want this split screen thingy for a single app, do like captfred suggests or see if the app itself supports some sort of splitting, like MS Excel.
If you want to do this system-wide, maybe you can get what you want by activating and using Spaces: http://support.apple.com/kb/PH4313

WS-SDK Scheduling two instances of the same report with different params

I'm using the web services SDK for Business Objects XI 3.1 SP 2 to schedule reports. I've got it so that I can successful schedule a report with prompts, setting the value for the prompt and running the report.
However, I'm now trying to schedule two instances of the same report using a single call to BIPlatform.Schedule. It creates the correct number of new instances, the last of which is completely correct. The first one (and in fact if I do more than two all the rest except the last) lose the parameter value from the prompt and the schedule information and the type. So for example if I schedule two instances, both PDF, both for 8am tomorrow with parameters of 1 and 2, I get:
A Webi instance, scheduled to run immediately with no parameters specified and
A PDF instance, scheduled for 8am tomorrow with parameter 2
Any idea what I'm doing wrong?
Cheers,
Jack
Edited by: Jackson Pope on Feb 3, 2011 1:34 PM

Can you possibly post your code here that sets params and schedules? Also as you schedule 2 instances on a single report in a sinlgle biplatform.schedule call(): as you query for InfoObject what you actually query for a single report isn't it, or do you schedule a report template and reschdule it previous instance?

HT3455 I got two receipts from the same tv show I bought. How's that even possible? I clicked the 'buy season ' button the first time and there was an error so I clicked it again, and now, I apparently paid for it twice! Apple is such a rip-off!

I got two receipts from the same tv show I bought. How's that even possible? I clicked the 'buy season ' button the first time and there was an error so I clicked it again, and now, I apparently paid for it twice! Apple is such a rip-off!

Wow.
Over react much?
Check your purchase history. See if it actually charged you twice.
If it did then contact itunes support for a refund.
No need be so over dramatic.

Two Tracks for the same Runtime System?

Hello,
can you please tell me if it is allowed to connect two tracks to the same runtime systems?
We have already a track connected to our systems. Now we have created a new track to deliver different content to those systems. We wanted to connect the new track to the same runtime systems. Our basis team told me that a where-used message came up that told them "The following runtime systems are already used elsewhere in the CMS domain".
Can you tell us if we will get problems because of this?
Thanks in advance,
Br,
Michael

Hello again,
ok now, thats something completely different CRM modification is always special.
To be honest i cannot tell for sure what will happen. As far as i know the default deploy strategy of NWDI is "deploy any version" which means NWDI will order SDM to just deploy not regarding any SDM Version (you are on a 7.0x System right?)
So it should be possible if everything else, excelt those 2 DCs is the same things should work. But if not the last deplyoed version of the shared DCS will be active. Which might lead to problems then.
As far as you described, the setup is as the CRM modification guides mentioned.
My first thought is that you are not forced to use CUSTCRMPRJ as SC name for the projects as far as I know. OS maybe the leanest thing would be to just use CUSTCRMPRJ_light (.o)) for the second track.
Hmmm not sure if this is a good idea or thought to the end. I don't have the CRM modifications guide at hand at the moment. But I guess there was a part where something was mentioned similar to this.
After all I have to say:Sorry. I can't give you solid, reliable tip/advice for this case. Maybe my thought will help you.
Or maybe someone else knows better.
Have a good time
Jan

Two calls at the same time on agent detail

Hi All,
Pulling an agent detail report for an agent im showing two calls with exact same start and end time. The first is listed as inbound non-acd and the second is listed as inbound acd, assigned to a queue which the agent is assigned to.
never saw it before and cant begin to understand it. Has anyone saw this before?

Hey tomas.micovcin,
I'm slightly confused by your question so i'd like to try and clarify a few things.
You have two AD7760. Each AD7760 is then connected to its own CED1Z. Is that correct?
Next i'm confused between which of the two following scenario's you're interested in.
1.You're interested in taking measurement from the AD7760 and bringing them into LabVIEW using the CED1Z as a USB interface. This would involve building a USB driver to bring the data into the LabVIEW environment.
2. You're interested in building code in LabVIEW that will acquire and process the data from the hardware. You then want to deploy this code to your Evaluation Board.
Which of these scenarios are you interested in? If none of these, what are you trying to accomplish?
Also... could you go into more detail on what you mean by "if is possible use LabView program \download from www.analog.com\, becouse i can,t find in "source code " place where i can choose name of usb port where is connect." I'm kind of confused as to what you're asking here.
Tim A.
National Instruments

Apex mixes applications working with two windows at the same time

Hi all, while developing in Apex I have found the following problem:
Working with two different applications at the same time, the browser goes from one to another indistinctly.
To reproduce the problem:
1. Open the same application builder in two different Firefox windows
2. Open a different application in each window (In my case: application 103 in window1 and application 105 in window2)
3. Go to shared components in both windows (window1 first)
- window1 breadcrumbs show: Home > Application Builder > Application 103 > Shared Components
- window2 breadcrumbs show: Home > Application Builder > Application 105 > Shared Components
4. Click in any shared component in window1 (Templates, Authentication Schemes...)
- window1 breadcrumbs show: Home > Application Builder > Application *105* > Shared Components > Templates (Application 105 instead of 103)
Is it a bug? I have read the known issues [[Here]|http://www.oracle.com/technetwork/developer-tools/apex/downloads/apex402knownissues-189793.html] but it does not appear.
Related Data:
Application Express version 4.0.2.00.07
Firefox 3.6.15
SO: Windows XP
The error is not reproduced with IE7. I have not tested any other browser.
Regards,
Molina

If you tried opening up two pages in the same application each of which modifies the same page items, you would notice the same issue.
This is because, in a session there is only one set of values for page items(or application items) and every parallel call to the same page would update the same bind variables.
Now the development environment or Apex Builder is also an apex application , and when try and open up the pages as you mentioned, they both access the same Application Builder page and sets/resets any existing values for those variables(and maybe cookies too if they are being used) , hence the 'mixing up'.
If that didn't convince you, check the URL of both the pages when you load them, they should show the same page number ( f?p=APP_ID:PAGE_NUMBER syntax). Imagine if the same approach was done with one of your application pages, say an edit form opened from a report with multiple records in multiple tabs like what happened with this case: {message:id=9346663}
So this really isn't a bug in a way, because that is how session states in apex is/was maintained. Ofcourse if they used another kind of development platform for building pages, it may have been avoided, but thats an altogether different point in itself.

Two copies of the same mail folders / Problem with TimeMachine backup

I have two copies of the same IMAP mail folders in my library
1. ~/Library/Mail (actual version)
2. ~/Library/Mail/V2 (old version)
I guess this is the reason why my TimeMachine does not backup the emails (it only backups the folder with only one version in folder "V2")
How can I resolve this problem ?
Manny thanks,
Ole

buddy.....I've tried urs suggestion,but now it is showing two quotations(easily adjustible in 2 pages) on 3 pages. I've tried Page Protect to set to No for all the repeating frames and fixed the horizontal & vertical length of all repeating frames.
plzzz let me to describe my report more deeply, it picks data from two tables,one master table containing quotation#,customer-id, date.2nd block contains details about repairing items. so all the data is in two
repeating frames which can be easily printed in half page. 2nd copy of this quotation will also print on the same page in the lower half portion of a page.
is it enough for u????
still if u peeps have any problem in understanding my problem then I think u peeps should have a look on my quotation report so that u may have a better idea of this problem.

0PA_C01 different results from two queries on the same cube ....

HI
Can you please help with this problems ...
i am running a two queries with the same restrictions e.g
Sep 08 for employee 22345 ,
In one report it shows the Pay Scale level as A1 , then in the other report it shows Pay scale Scale level as A2 ,
looking at the master data in 0employee , the first report is right ... this is how the data looks like in 0employee
Employee Valid from      To                Pay scale Level
222345       2007-11-03   2008-09-30     A1
222345       2008-10-01   9999-12-31     A2
Can someone please shed some light on this , im thinking it has something to do with update rule but even that is supposed to use last date of the month , not 1st day of the following month. The Cube is a stndard cube 0PA_C01 and the update rule aswell .....

Hi,
Please check in the cube whether the data for the Employee is getting with two values like shown in your question:
Employee Valid from To Pay scale Level
222345 2007-11-03 2008-09-30 A1
222345 2008-10-01 9999-12-31 A2
and also check whether when the data loaded to the cube.
There may be some change in the report structure where the difference is getting may in the column wise or row wise restriction may present.
Please check on the structure of the report also.
With Regards,
Ravi Kanth

Selection screen in Cc reporting showing two lines when changed Person Res.

Hi Guruz
I have changed Person responsible in Cost centre hierarchy. Now I have two interval with different person responsible 1st one is from 01.01.07 to 31.12.2008 and 2nd one is from 01.01.2009 to 31.12.9999. When I go to cost centre report and look for the cost centre fo this cost centre system is showing two lines one with 1st Person responsible and second with 2nd Person responsible. I don't know how to show only latest one on the selection screen in cost centre reporting, any thoughts on this one?
Many thanks

Hi
I wanted to keep history as well as showing only latest line for cost centre on selection screen but unfortunately it's not possible.
The only way we can do this is change the name of person responsible from 01.01.2008 and system will show only one line. In this situation we will loose the history of the pervious person responsible for that cost centre but that's the way it works OR if you want history then we have to live with more than one line.
Many thanks

Two actions on the same day

Hi Experts,
I have activated the additional actions, even though i am not able to perform two actions on the same day. When i am running the second action on the same day, system deletes the first action. Plz help
regards
Kunal

Hi Kunal..
Check below:
Cause and prerequisites
You use the functions 'Additional actions' (infotype 0302) (that is, flag ADMIN EVSUP = 1 in table T77S0). If you delete or shift a created personnel action type 'Leaving' and then create a new personnel action without leaving the transaction, on the list screen of infotype 0000, the system does not display the last but one personnel action.
Solution
To correct the display problem, start report RPUEVSUP for the affected personnel number. Then check Customizing of the personnel action types (table T529A), since the report sets indicator U0302 (update of infotype 0302) active for all personnel actions.
Hope this helps ! if so reward.
Thanks
Shyam

System Report shows two monitors on the same graphics card

Similar Messages

Maybe you are looking for