System Status ACPT not update

Hi all ,
System status ACTP for some WBS in project are not Update automatically till Sales Order created & released (no Issue log found for SO) under that WBS . But in same Project for some WBS it update automatically . Also Due to which report created by report painter price (Sales order ) Vs Cost (Budget ) not shown the Price values .
Thanks ,
Virendra

Hi,
Run program CNSTATUS to eliminate system issue.
Thanks,
Sudhakar

Similar Messages

System Status ACPT not getting updated

Dear All,
In some cases, I am noticing that system status is not getting updated on WBS, even thought the WBS is there in the Sales Order line item.
Can anyone tell what can be the cause of this.
Sales Order header data is same in both the cases (WBS with or without ACPT). Only material is different.
Regards
Shubham

Hi Shubam,
Thank you for sharing the details.
Yes, let us conclude as follows (as per my previous reply)
System Status ACPT will not be updated ...
1) if the pricing condition is not updated in the sales order (or the net value is zero in the sales order).
2) if the sales order is under credit block.
Thanks
abdul.
abdul khader wrote:
> I think because of the price (0 value). for credit block also system wont update.
>
>

Inspection Lot Status (CROK)not updating for Certificate Reciept

Hi
I want to inspect vendor materials on the basis of thier Quality certificates
1) Config Set up:
a) Certificate type :YA72
Cert for each PO item :checked
Certificate Check reqd: :Checked
Enhance cert processing: Checked
b) Control key :0005 ( Delivery release ,Certificate)
2) Material Master (QM View)
    QM Procurement : Checked
   Control Key :0005
   Certificate Type :YA72
3) Goods Recipt
    MIGO < Purchase Data<Cert Reciept :Yes
    Inspection lot is created
Question : Inspection lot status is not updating for Certificate Recived or not
                  My understanding is Inspection lot status should be :CROK -Certificate Recieved
CTCM-Certificate Missing
Pls correct my understanding in case i am missing something
Thanks in advance

Is the status in the GR document have the cert field set as 5?
Since you set the "certificate check required" you must do an explicit check of the cert. I included below the help screen from this indicator in SPRO.
You should be able to review the status of your cert in transaction QC53.
FF
Explicit Inspection of GR Certificate Necessary
If you set this indicator, at goods receipt the system will generally perform as described in the field "Control without certificate".
This means that even if you confirm the certificate receipt at goods receipt, and thereby set the status "2 - Certificate received", the system will still perform as specified in the field "control without certificate". See Control without certificate.
You must explicitly check the content of the certificate recieved at goods receipt and set the status "5 - Certificate filed and inspected ", before, for example, the inspection lot status will be set to CROK.
You can confirm that you have checked the content of the certificate in the certificate transaction or when making the usage decision.
Note
If you have set the indicator and chosen an unsuitable setting in the field "Control without certificate", the goods receipt can be generally blocked.
This security function is generally used at electronic certificate receipt to check the accuracy of the certificate contents.

System Status TECO should update automatically in Maintenance Order

Hi,
Our Client has a requirement in the Maintenance Order.
Whenever we confirm the Last Open Operation in the Order, the system status should automatically update to TECO.
Any Inputs, please let me know.
Thanks in advance!!

Hi again,
Fairly old thread now but... (Wanted to share some info here for anyone interested)
Correct and accurate, using any of these FM:
STATUS_CHANGE_INTERN
STATUS_CHANGE_EXTERN
or IBAPI_ALM_ORDER_TECO_SET
This will definitely work as I have used them and this did work then.
What I would do is this:
- Check in chosen User-Exit if all needed prerequisites are meet for the operations first of course
- If this is possible during the saving process then just use say FM STATUS_CHANGE_INTERN for the update. Commit will then not be needed as we are in "IW32"-transaction mode already.
- If the above is not possible then I would create a FM that is called in "in update task" from the very same User-Exit with the Order number as importing parameter. What will happen is that the Order will first be saved and then the FM will be running afterwards.
Process now:
- Call the FM from the User-Exit "in update task" with the Order number as importing parameter
- Wait for Order to be saved (first try to lock, if locked: wait x secs, try to lock again etc, when OK to lock -> unlock again)
- Read sufficient Order data to determine if prerequisites are met
- Use say FM STATUS_CHANGE_INTERN for the update (here OBJNR can be read from table AUFK for the Order number)
- Remember to do a COMMIT"
Done.
BR, Johan

In Student File:Status Tab Not Updating Automatically

Hi all
When I create a Student, and Create Admission application and create admission, Every time status should be updated automatically. In one system it is updating Correctly, But in Other system it is not updating.
In the other system it is updating only when I create student with the status 'Account Data Not Updated'. Later Statuses like (Admitted Applicant: ADMA, Applicant: ADMU,Attending: CS01,Student: CS03) are not updating.
Can any one tell me where I have to Configure it.
I think because of it the Student Header Status is also not displaying.
My developer debugged and found that, As there are no Active Status Indicators, Student Header Status is coming empty.
Also he found that the Status Infotype 1728 is Empty in one System and filled in other System.
I have checked both the systems, But I didn't find any difference.
I have been struggling for past One week for the same.
Please do the Helpful.
Thanks and Regards
Avinash.
I

Hi Vinod
Thanks for help.
I have activated the BADI HRPIQ00_SET_STATIND for filter ADO1(Create Adm Appl) and AD05(Execute Adm).
But that BADI is not triggering when I create admission application or when Creating Admission.
The Status tab is still not updating.
As per my knowledge when ever we create admission application, or create admission like things, the status tab in student file updates automatically depending on some configuration. Because in the other system (which i told in my earlier Question)in which statuses are updating correctly,there is no active Implementation of the BADI HRPIQ00_SET_STATIND,but still Statuses in this System are Updating Correctly.
As of now I have Implemented the BADI HRPIQ00_SET_STATIND with filter AD01 AD05. I didnt write any code in it.
When I put a Break point in the method SET_STATIND of the active Implemented BADI, that break point is not triggering when i create adm appl and when creating admission. So can you tell me how to proceed further to write any code in that.
Are there any standard templates of code available to activate and deactivate the statuses in the method SET_STATIND.
Or any other Config issues because of which the updation of statuses are effecting.
Issue Reg: Status Line
I have seen the BADI HRPIQ00_ST_HD_HS and Implemented the method BUILD_STATUS_LINE for the Custom status.
As you told to use standard Implementation to get the status line, Can you tell me where i could find the standard Implementation to build the status line.
Also to write a custom program to build the status line, Infotype for stauses 1728 is not updating. So I cannot able to fetch the data of statuses from the Infotypes.
Thanks in advance.
Regards
Avinash
Edited by: Avinash on Dec 4, 2009 8:03 AM

Status is not updated from delivery to sales order item.

Dear Folks,
One user created sales order with 10 line items and he created delivery and later he deleted line item 30 in that delivery document and with remaining 9 line item he done the PGI & Billing.Here what is the problem is the deleted line item in sales order status showing as completed and delivered quatity showing as 10.Status is not updated from delivery to sales order item.Please let me know how to resolve this?
Thanks & Regards,
murali.

Dear Murali,
Please go to VTLA transaction then select your delivery and order types after that go in to the details of the item level settings here you check field called Update document flow under Control data tab.
I hope it will help you,
Regards,
Murali.

Requisition status was not updated

Hello people,
we have a requisition with only one item. We are asking quantity = 4.
For this requisition were opened 4 RFQ. So the requisition Processing Status is "RFQ created".
After this, it was created an order with 4 lines (each one with PO Quantity = 1). In the first line we have the RFQ and the requisition numbers above.
But the requisition Processing Status is "RFQ created" yet.
Why the status was not updated? And, how can I update it?
I tried to run the report RM06HL04, but it didn´t update it.
Thank you!

Have you check your PO,if its still in Held status.

WIP status (RESA) not updated for process order with co-product

Hi,
We are facing the scenario below, please confirm whether item 2 behaviour is standard SAP.
1. Process order with settlement rule MAT - after WIP calculated, status RESA is updated & FI document it posted.
2. Process order with settlement rule OIT (co-product) - after WIP calculated, status RESA not updated & FI document posted.
Thank you.

Self found answer

Incoming order and system status ACPT

Hi,
Can someone inform how the incoming orders can be controlled with system status ACPT.
Regards,
Mrinal

When sales order is created and saved with account assignment to the WBS element under question, status ACPT is set for the WBS.
Regards
Nitin p.

Current Status report not updating

Over the past few months I have been getting more and more problems where the "Current Status" indication is wrong. Usually I can get the "Current Status" back to being accure by going to File/Refresh. In the past when something changed the status, like a restart taking the system off line for a few seconds, the current status would update back to Available once the remote computer completed its reboot. Now however there is about an equal chanve that the status indicated in ARD will or will not update automatically when the status changes. If the status remains at ARD Not Available or Sleeping or something else ARD will not control that system till I manually do a refresh and then initiate the new action.
This is more of an irritant than a major problem but it sure would be nice if I could get ARD back to correcting and updating the indicated status correctly. This is with the 3.5.1 ARD Admin software. Any Ideas?

A few things I would suggest you do to determine where the problem lies.
1) Create an Essbase pull sheet in Excel that mimics the form and verify you see the data in Essbase -- you should see it just after your form is saved.
2) Compare the dimensions on your report with those on the Form. I would guess your report has an upper level member that is not dynamically calculated -- if this is true then if you really want the report to show the exact data as the form then update the report appropriately.
Good Luck,
-John

Support Desk Message is Sent to SAP; But the status is not updated

Hi All,
We have Solution Manager 7.0 SP15 with Windows Server and Oracle.
Service Desk is configured.
One user has reported a problem from satellite system.
It arrived to Service Desk of Solution Manager.
The support team message processor changed the status to "In Process"
and asked sapadmin user(who can forward messages to SAP) to forward this message to SAP.
sapadmin user(SAP-OSS) has performed the action "Send Message to SAP" successfully.
But the status of the message is still "In Process". It didn't change to "Sent to SAP".
Question is:
1. Where and How to check the message is really sent to SAP or not?
2. Why the status is not changed to SAP? Is anything needs to be done yet?
I have checked this thread and performed the actions. But still it doesn't work.
Send support message to SAP, don't refresh info at service desk
Regards,
Sanjai

Rohit,
Thanks.
I have implemented this note.
I get different error now when the user try to do the action "Send Message to SAP".
The error is: "You do not have authourization to send notification to SAP".
The user has the following roles:
Z:M_SAP_SM_SOLUTION_ALL
Z:M_SAP_SOCM_IT_OPERATOR
Z:M_SAP_SOCM_REQUESTER
Z:M_SAP_SUPPDESK_ADMIN
Z:M_SAP_SUPPDESK_CREATE
Z:M_SAP_SV_FDB_NOTIF_BC_ADMIN
Z:M_SAP_SV_SOLUTION_MANAGER
Z:SAP_MAINT_OPT_ADMIN
SAP Note 1140822 resolved this issue.
We are able to forward the message to SAP.
Regards
Sanjai

How to reset Work Order System Status -NCMP Not completed

Hi Friends,
Please can anyone guide me how do I reset / revert the NCMP (Not completed) System Status of the Work Order. The System Status comes after I have done the Function of "Do Not Execute".
Thanks in Advance.
Anant

Hi,
1. You cannot reset it back . For future cases ensure to grey out the option using Transaction Variants SHD0 for IW31/IW32 Tcodes
2.Steps to create transaction variant http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40d1443e-0184-2c10-c68d-c612f771fe6f?quicklink=index&overridelayout=true
3.You can also explore user exit :IWO10026 User check on setting status 'Do not perform'
regards
pushpa

WBS data distribution for IDOC-PI-JDBC with system status 'CRTD' not working.

Hello Experts,
I am busy with a project where the PS project creation and updates should be transfered to the external legacy system through IDOC-PI-JDBC scenario.
I am using the BAPI_PROJECT_MAINTAIN for this process. This scenario is working fine with the projects system status released (REL).
If the system status is Created (CRTD) then no idoc creation happening therefor no data distribution of work breakdown structure(WBS) to the legacy system.
Can anybody give me some suggestion of make it happening.
Thanks in advance.
Regards,
Antony.

Hello all,
I did it with the help of my abap developer.
We implemented a BADI, and from the BADI we created the idoc.
When the idoc is there the legacy system receive the data.
Regards,
Antony.

EH4 Completed - System Status does not show any info

Hi All,
I have completed the EHP4 installation on one of our ECC 6.0 system and now when i login to SAP and click on System -- Status
it jus shows me that it is ECC 6.0 ,It does not show me ECC 6.0 EHP4 , do i need to do anything after EHP installation is over?
Regards,
Ershad Ahmed

Hi Marko,
Thanks for the reply . I checked and found that our SAP_APPL is on 604. I had another question during EHP4 application
we had to increase the DB size. Before i started the EHP when i took the DB backup our DB size was 83 GB and now when
i check it is 135 GB, is it possible for us to recliam this space. The only option which i can think of is DB Reorganization but was
not very sure. Any inputs would be of great help.
Regards,
Ershad Ahmed

Apple Mail read status does not update correctly

I have one iMac running Mavericks and using Apple Mail to run three IMAP accounts provided by a local Apple Mountain Lion Server.
It exhibits two issues:
Firstly it fails to refresh the view automatically in the message viewer window.
The header at the very top of the window will update live when a new message comes in so that it says "X Messages (Y Unread)" with the correct numbers. The list of messages does not update unless you switch mailboxes, then switch back again. Then they appear instantly.
The second and more critical issue is that the read and unread status of messages is not updating correctly at all. Refreshing the view make no difference. Two of the three accounts are shared with 6 other iMacs running Mountain Lion and Snow Leopard. None of these have an issue.
I have deleted and re-added the accounts several times, I have tried a completely clean new user account. Sometimes the first issue goes away but it returns after a short time.
The next step would be to erase the whole Mac but I am reluctant to go to the hassle as I have a suspicion that this will not make a difference and that there is a glitch with Mail on Mavericks. I have run all updates.

Hi Brenn,
To narrow down the issue, we need more investigation:
1.Does the issue occurs only in Category view? Please check if user 1 set the view to Date and email read status update.
2.Does the issue occurs to user1's own mailbox with the same setting as shared mailbox?
3.If the shared mailbox is in cached mode, please check Account Settings > Change > More Settings... > Adwanced > Use Cached Exchange mode > check Download shared folders.
4.Please switch to online mode for shared mailbox and test the issue.
Regards,
Rebecca Tu
TechNet Community Support

System Status ACPT not update

Similar Messages

Maybe you are looking for