System Utilities Check error 11i
when instaling 11i.10.0
validate system configuration
System Utilities Check shows warning this...
command : cmd.exe /c D:\startCD\Disk1\rapidwiz\bin\adchkutl.cmd C:\cygwin C:\Microsoft Visual Studio 8
D:\startCD\Disk1\rapidwiz>echo off
'which' command is not available. Check MKS installation.
ERRORCODE = 1 ERRORCODE_END
RW-50011: Error: - System Utilities Availability test has returned an error: 1
how can i resolve this issue.........
regards
sneha
inplace of mkstoolkit i installed cygwin,
which command i need to use in place of this:-
" 'C:\mks\mksnt' for the location of MKS during the installation" -"Provide the pathname to the bin directory under the Cygwin Root Directory instead (For example, "C:\cygwin\bin").
After you install Cygwin, please do the following:
C:\> copy gawk.exe awk.exe (answer yes to copy over existing file)
C:\> copy grep.exe egrep.exe
C:\> copy make.exe gnumake.exe
C:\> copy gcc.exe cc.exe
Add the cygwin bin directory to the system path.
For more details about installing Cygwin, please refer to Note: 302859.1 - Using Cygwin to Maintain Release 11i on Windows
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=302859.1
Similar Messages
-
System Utilities Check - Error while installs OraApps on AIX
Hello Everyone ,
OS : AIX 5.3 TL12
Oracle Applications 11.5.10.2
while trying to install Oracle Applications on AIX everything passed the TEST / Checks except the following
[System Utilities Check] << faild with the following error message
System Utilities Check
These utilities need to be accessible on your system in order to do administrative tasks.
command : /Stage/Stage11i/startCD/Disk1/rapidwiz/bin/adchkutl.sh
Checking for make... found - /usr/bin/make
Checking for ld... found - /usr/bin/ld
Checking for cc... found - /usr/vac/bin/cc
Checking for ar... found - /usr/bin/ar
Checking for AIX 64-bit kernel extension for Oracle......
Found pw-syscall files and inittab entry on this system.
Note: you can also verify that the AIX 64bit kernel extension for
Oracle are loaded by running "/etc/loadext -r"as root:
Utility check completed successfully
System Utilities Availability test has succeeded
command : /Stage/Stage11i/startCD/Disk1/rapidwiz/bin/adaixchk.sh
AIX System Version found : 5.3
IBM VisualAge C++ v6.x or IBM XL C/C++ v7.x is required,
if you are installing any/all of the below products.
1. Discrete Manufacturing.
2. Advanced planning and Scheduling.
3. Transporation Planning.
RW-50011: Error: - IBM C++ utilities Availability test has returned an error: 1
i followed Oracle Installation guide for 11i and we have installed all the required packages and system prerequisites.
if any anyone has any solution , please share it with me
Best Regards,
Sam JazzxlC.adt.include 8.0.0.0 COMMITTED C Set ++ Application
xlC.aix50.rte 10.1.0.3 COMMITTED XL C/C++ Runtime for AIX 5.3
xlC.cpp 9.0.0.0 COMMITTED C for AIX Preprocessor
xlC.msg.en_US.cpp 9.0.0.0 COMMITTED C for AIX Preprocessor
xlC.msg.en_US.rte 10.1.0.3 COMMITTED XL C/C++ Runtime
xlC.rte 10.1.0.3 COMMITTED XL C/C++ Runtime
#which linkxlC
/usr/vacpp/bin/linkxlC -
Error in installing 11.5.5.35 in system utilities check
While installing the oracle applciations 11.5.5.35, during the system utilites check, it gives the following error, please help me in solving this error.
System Utilities Check
running command : cmd.exe /c F:\rapidwiz\bin\checkutil.cmd d:\mksnt d:\programfiles\Microsoftvisualstudio
F:\rapidwiz>echo off
'which' command is available.
'gnumake' is available.
'cc' is available.
'link' is not available.
ERRORCODE = 1 ERRORCODE_END
Error - System Utilities Availability test has returned an error: 1Hi
i have installed VC++ , MKS and gnumake before starting the installion. While runing the build_w32.bat, the result is coming sucessful. But in the prerequirement check error link is not available is coming. How to overcome this error?
-Arun -
System Utilities Check: Check system for make, ld, ar and cc
Can someone help me with this following problem?
While installing 11i applications, its giving an error "System Utilities Check: Check system for make, ld, ar and cc" When I checked for these files, all the files are existing except for ld. How do I resolve this problem?Hi,
I hope the installation u r doing is on Windows platform. COpy ld,ar,cc,link,which utilities r under ur winnt\system32. Try to reinstall. & also in the path ensure that ur winnt\system32 & winnt r at the last. It will work. I hope this helps u.
Venkat -
System Utility Check fails - 11i Apps Install on NT
Hello All Thanks for you help & time in advance.
I am trying to install the 11i Trial version on a NT box and the following message is coming up.
It says the following:
System Utilities Check
running command : cmd.exe /c
D:\rapidwiz\bin\checkutil.cmd C:\mksnt C:\VC98
D:\rapidwiz>echo off
'which' command is not available. Check MKS
installation.
ERRORCODE = 1 ERRORCODE_END
Error - System Utilities Availability test has
returned an error: 1I am having the same problem. Have you been successful in fixing it? if so please help. my email id is [email protected]
Thanks -
System Utilities Check: Check system for make, ld, ar and cc - Windows XP
Can somebody help me?
I am trying to install Oracle 11i on a Windows XP home edition machine in a single mode and Vis database. I am getting the error message as following.
System Utilities Check: Check system for make, ld, ar and cc.
Is it possible to install Oracle 11i on XP home edition at all?
Appreciate your help.How can i find this command make, ld, ar and cc.????
thanks -
System Utilities Check failed while rapid installation
Hi All,
Following error is encountered while installing Oracle Applications 11.5.10
System Utilities Check
command : cmd.exe /c C:\Stage\Stage11i\startCD\Disk1\rapidwiz\bin\adchkutl.cmd C:\Program Files\MKS Toolkit C:\VC
C:\Stage\Stage11i\startCD\Disk1\rapidwiz>echo off
C:\WINDOWS\system32/cmd.exe
'which' command is available.
C:\WINDOWS\system32/gnumake.exe
'gnumake' is available.
C:\WINDOWS\system32/cc.exe
'cc' is available.
'link' is not available.
ERRORCODE = 1 ERRORCODE_END
RW-50011: Error: - System Utilities Availability test has returned an error: 1
what could be the reason ?
Regards,
NeerajHi Andrew,
Thanks for the article.
Now I want to do fresh installation of MKS toolkit and all other stuff for sucessfull installation of Oracle Application.
But during the installation of mks toolkit, I am unable to specify the path for installation i.e., c:\MKS , it is saying that " An existing installation is detected. The install location cannot be changed."
But I have uninstall it through control panel->add and remove programs and manually cleaned all the physical files but still error encountered.
Please guide me how to proceed .
Regards,
Neeraj -
System File Checker errors "tsprint-datafile.dat"
I keep getting the sfc /scannow error referring to "tsprint-datafile.dat" file.
I don't have another Windows 7 system at the moment to copy a good file over. Even if I do, I suppose this file could be system specific.
Below is the last section where the errors happened after running the command 'findstr /c:"[SR]" %windir%\Logs\CBS\CBS.log >"%userprofile%\Desktop\sfcdetails.txt"' as instructed at http://support.microsoft.com/kb/929833#CBS%20log.
2014-02-17 11:18:11, Info CSI 00000333 [SR] Cannot repair member file [l:40{20}]"tsprint-datafile.dat" of tsprint.inf, Version
= 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-17 11:18:14, Info CSI 00000335 [SR] Cannot repair member file [l:40{20}]"tsprint-datafile.dat" of tsprint.inf, Version
= 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-17 11:18:14, Info CSI 00000336 [SR] This component was referenced by [l:184{92}]"Microsoft-Windows-Client-Drivers-Package~31bf3856ad364e35~x86~~6.1.7601.17514.TSprint-Driver"2014-02-17
11:18:14, Info CSI 00000338 [SR] Verify complete
2014-02-17 11:18:14, Info CSI 00000339 [SR] Verifying 100 (0x00000064) components
2014-02-17 11:18:14, Info CSI 0000033a [SR] Beginning Verify and Repair transaction
2014-02-17 11:18:21, Info CSI 0000033c [SR] Verify complete
2014-02-17 11:18:21, Info CSI 0000033d [SR] Verifying 100 (0x00000064) components
2014-02-17 11:18:21, Info CSI 0000033e [SR] Beginning Verify and Repair transaction
2014-02-17 11:18:25, Info CSI 00000340 [SR] Verify complete
2014-02-17 11:18:25, Info CSI 00000341 [SR] Verifying 100 (0x00000064) components
2014-02-17 11:18:25, Info CSI 00000342 [SR] Beginning Verify and Repair transaction
2014-02-17 11:18:27, Info CSI 00000344 [SR] Verify complete
2014-02-17 11:18:28, Info CSI 00000345 [SR] Verifying 100 (0x00000064) components
2014-02-17 11:18:28, Info CSI 00000346 [SR] Beginning Verify and Repair transaction
2014-02-17 11:18:33, Info CSI 00000348 [SR] Verify complete
2014-02-17 11:18:34, Info CSI 00000349 [SR] Verifying 44 (0x0000002c) components
2014-02-17 11:18:34, Info CSI 0000034a [SR] Beginning Verify and Repair transaction
2014-02-17 11:18:36, Info CSI 0000034c [SR] Verify complete
2014-02-17 11:18:36, Info CSI 0000034d [SR] Repairing 1 components
2014-02-17 11:18:36, Info CSI 0000034e [SR] Beginning Verify and Repair transaction
2014-02-17 11:18:36, Info CSI 00000350 [SR] Cannot repair member file [l:40{20}]"tsprint-datafile.dat" of tsprint.inf, Version
= 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-17 11:18:36, Info CSI 00000352 [SR] Cannot repair member file [l:40{20}]"tsprint-datafile.dat" of tsprint.inf, Version
= 6.1.7601.17514, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24{12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch
2014-02-17 11:18:36, Info CSI 00000353 [SR] This component was referenced by [l:184{92}]"Microsoft-Windows-Client-Drivers-Package~31bf3856ad364e35~x86~~6.1.7601.17514.TSprint-Driver"
2014-02-17 11:18:36, Info CSI 00000355 [SR] Repair complete
2014-02-17 11:18:36, Info CSI 00000356 [SR] Committing transaction
2014-02-17 11:18:36, Info CSI 0000035a [SR] Verify and Repair Transaction completed. All files and registry keys listed in this transaction
have been successfully repairedHi healee,
Thank you for your update.
All of the components in the operating system are found in the WinSxS folder – in fact we call this location the component store. Each component has a unique name that includes the version, language, and processor architecture that it was built for.
An INF file is a text file that contains all the information that device installation components used to install a driver. Windows installs drivers using INF files. This information includes the following:
a. Driver name and location
b. Driver version information
c. Registry information
For your reference:
http://msdn.microsoft.com/en-us/library/windows/hardware/ff549520(v=vs.85).aspx
You may refer to the informations above to check what is the file for.
Based on my experience, it may related to print driver, you may consider to cantact the printer's manufacturer for insight.
Theoretically, the sfc /scannow command will scan all protected system files, and replace corrupted files with a cached copy that is located in a compressed folder at %WinDir%\System32\dllcache. The %WinDir% placeholder represents the Windows operating system
folder. There are a limited set of cached files, the rest must be manually replaced if they are corrupted or missing. SFC probably will not fix the corrupted file due to there are updates in the process of installing. Those updates either need to complete
their installation or be uninstalled, or removed.
Hope it helps.
Regards,
Blair Deng
Blair Deng
TechNet Community Support -
When I run a system utilities check and select HD. i always get a prompt the the SUID System/Library/CoreS has been modified and will not be repaired. How can I access this file so that I may repair it? Left unrepaired . There are a lot of files that do not have the correct code. They are one thing but should be another
Hello there, toestothenose.
It seems that you may not have gotten the entire message into your thread here, but the following Knowledge Base article offers a good resource on which messages from Disk Utility's Repair Disk Permissions can be safely ignored:
Mac OS X: Disk Utility's Repair Disk Permissions messages that you can safely ignore
http://support.apple.com/kb/ts1448
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
Failed pre install check for 11i
Hi, newbie to 11i and am trying to install 11i on my 250GB external HD but failed pre-install checks in 3 areas
1) system utilities check (!)
2) operating system check (!)
3) file space check (x) talked about mount points in error message
Quite frustrating as i had installed the mks and mvs files on my c:\ as instructed. also i was`advised to certain tests thru the cmd prompt by entering these files; link, gnumake and cc. i got responses for link ad gnumake but no respnses for cc.
guys out there, any solutions please
Message was edited by:
user480131Saw the same post at other place too..
While running rapid install did you give the mount points for Data_top ora_top and Appl_top to correct values
For system utils check for the PATH env variable is it pointing to right place.
For OS check .. I am not sure. (you should have checked the certiifcation matrix for this .. or may be some required patches are missing for this OS)
Hi, newbie to 11i and am trying to install 11i on my
250GB external HD but failed pre-install checks in 3
areas
1) system utilities check (!)
2) operating system check (!)
3) file space check (x) talked about mount points in
error message
Quite frustrating as i had installed the mks and mvs
files on my c:\ as instructed. also i was`advised to
certain tests thru the cmd prompt by entering these
files; link, gnumake and cc. i got responses for link
ad gnumake but no respnses for cc.
guys out there, any solutions please
Message was edited by:
user480131Saw same post at another place too .. -
Configuration Check Error in Managed System Configuration
Hi dear experts,
I come across a problem as the screenshot shows blew:
I check some relevant information, but no issues found:
1.
DEWDFLSSC5062:/usr/sap/hostctrl/exe # ./saphostexec -status
saphostexec running (pid = 7094)
sapstartsrv running (pid = 7097)
10:46:34 24.06.2014 LOG: Using PerfDir (DIR_PERF) = /usr/sap/tmp
saposcol running (pid = 7130)
DEWDFLSSC5062:/usr/sap/hostctrl/exe # cat host_profile
SAPSYSTEMNAME = SAP
SAPSYSTEM = 99
service/porttypes = SAPHostControl SAPOscol SAPCCMS
DIR_LIBRARY = /usr/sap/hostctrl/exe
DIR_EXECUTABLE = /usr/sap/hostctrl/exe
DIR_PROFILE = /usr/sap/hostctrl/exe
DIR_GLOBAL = /usr/sap/hostctrl/exe
DIR_INSTANCE = /usr/sap/hostctrl/exe
DIR_HOME = /usr/sap/hostctrl/work
service/admin_users = daaadm
service/logfile_000 = /tmp/s
service/logfile_001 = /usr/sap/DAA/SMDA97/SMDAgent/log/smdagent_trace*.trc
service/logfile_002 = /usr/sap/DAA/SMDA97/SMDAgent/log/smdagent_trace.*.trc
service/logfile_003 = /usr/sap/DAA/SMDA97/SMDAgent/log/smdagent_trace.trc
And the version of hostagent is up-to-date.
2.The URL
- http://<SMDhost>:1128/SAPOscol/?wsdl
- http://<SMDhost>:1128/SAPHostControl/?wsdl
can be accessed.
3.The step 3 in managed systems configuration is executed successfully.
4.I have even uninstalled and re-installed the SMD and hostagent, and change the alert_timeout parameter in T-code DMD, but the issue insisted.
5.Only a few SMDs in my landscape, so I think the parameter MaxThreadCount, InitialThreadCount, MinThreadCount should be no problem.
Now I have no idea how to proceed, please give me some advice, thank you in advance.
Best Regards,
Pany PanHi Pany
Kindly check the below two sapnote
1935653 - Error "A timeout occured during the execution of the OS Command Console" when performing a Managed System Configuration - Solution Manager 7.1
1865122 - Solution Manager 7.10 Configuration Check errors : "A timeout occured during the execution of the OS Command Console" "An unexpected error occured"
Moreover , you need to check/verify/maintain the parameter in configtool
ThreadManager -> MaxThreadCount
Total number of Diagnostics Agents * 2 + 50
1250
ThreadManager -> InitialThreadCount
Total number of Diagnostics Agents * 1.5
900
ThreadManager -> MinThreadCount
Total number of Diagnostics Agents
600
ConnectionManipulator -> maxSoTimeOutConnections
Total number of Diagnostics Agents * 1.35
810
ConnectionManipulator -> MaxParallelUsers
Total number of Diagnostics Agents + 50
650
In Diagnostics Agent Troubleshooting - SAP Solution Manager Setup - SCN Wiki
guide check the section Required Solution Manager Java Stack Settings (Scalability)
I face the same issue , which got resolved by maintaining the above parameters, maxthreadCount,
minthreadcount , maxSoTimeOutConnections.
With Regards
Ashutosh Chaturvedi -
Location: bcpimp.cpp:1797
Expression: cbOutTemp < cbOutputStr
SPID: 52
Process ID: 2364
Msg 3624, Level 20, State 1, Line 3
A system assertion check has failed. Check the SQL Server error log for details. Typically, an assertion failure is caused by a software bug or data corruption. To check for database corruption, consider running DBCC CHECKDB. If you agreed to send dumps to
Microsoft during setup, a mini dump will be sent to Microsoft. An update might be available from Microsoft in the latest Service Pack or in a QFE from Technical Support.
Msg 0, Level 20, State 0, Line 0
A severe error occurred on the current command. The results, if any, should be discarded.If you check your sql server error log folder you will see dump files created. You need to send those dump files to Microsoft for inspection because outside of microsoft product support the symbols for reading the dumps are not available without which it
wont be easy to find the issue.
http://support.microsoft.com/kb/2028589
In the meantime check if you are on the latest version of Service Pack and if not apply the latest service pack. Majority of these kind of assertions are bugs which are solved in Service Packs/Cumulative Updates.
Regards, Ashwin Menon My Blog - http:\\sqllearnings.com -
Error: unable to connect to database using user system. please check privil
Hi All,
i have 2 oracle databases in my system (ORCL,RR). i am able to connect both databases i sql prompt. but in ggsci prompt not able to connect rr database due to below error
dblogin userid system, password tiger.
Error: unable to connect to database using user system. please check privil
Can you please help me to connect RR database also in GGSCI promt.
Thanks
RajaDid you try with RR database tns name or sid while connecting ?
If No then try this ,
GGSCI (ATP) 6> DBLOGIN USERID SYSTEM@<tns alias name>
Password:
Successfully logged into database.
HTP
Annamalai. -
System Health Checks Utilities
Hi Linux Gurus,
I need to understand some of the outputs of basic system health checks utilities - vmstat, netstat, iostat. As DBA point of view when I run any of the above utilities - what things I should look for. How can I know, the network traffic is high or network is not performing properly by using netstat. How can I know that the system I/O is high. Also I saw that there are many flags for these utilities which are very helpful to format or limit the output to a certain extent.
I will really appreciate the help on this topic.
Best Regards
-Samar-Hi Samar
A graphical tool like sourceforge.net/projects/xosview/ can make a part of the job, otherwise does oracle the OS Watcher (OSW) is a set of scripts that continually run in the background, collecting information about: Processes I/O Memory Network
OS Watcher user’s guide in MetaLink note 301137.1
Hope this helps.
Regards,
Hub -
System-wide Spell Checker Error
I newly installed Leopard on a MacBook Pro, and now in Mail, Safari and iTunes, I get a "Couldn't contact Spell Checker" error message when I try to type in these programs. The problem disappears in Mail if I set Spell Check to never in the preferences. Safari & iTunes don't have that option, that I could see.
But that's besides the point. Spell check should be seamless and automatic. The error doesn't just occur once. It basically hangs the program because the error cycles continuously and I have to force-quit to get out of the application.
So now I am using Firefox to type this because Safari wouldn't let me type without letting me know it can't contact spell checker.
To remedy the situation, I've verified and repaired permissions, although I did not see any permissions that related to this issue. I downloaded and re-installed the 10.5.1 update. No effect. I've spotlighted 'spell checker' and only gotten the .dll file from Windows as a return.
Guesses, anyone?etresoft, thanks for the hint. I looked and found tons of stuff, but not a thing to do with the spell checker error. I did log into another profile on the affected machine and had no trouble whatsoever. Does that mean the problem is in my home/library? I think, hopefully logically, that there's another program causing this issue. What would be the logical way to approach this?
Maybe you are looking for
-
Hi I don't know since when, but I can't send email anymore via iCloud on my Mac. iPhone and iPad work. Online iCloud as well. I am running: OS X 10.9.2 Mail 7.2 (1874) I use the @me.com adresses smtp Server says: iCloud(iCloud) What I tried so far: I
-
my laptop was stolen and with it my itunes, all of my music (including non-apple downloaded content) is still on my iphone 5, how can I transfer the files to my new laptop which is authorised to the same apple ID?
-
LV Bug? - Blink Background color only red after build
It seems no matter what I choose for a Tools/Options/Environment/Blink Background color during debug (which works perfectly), the color will always revert back to the default of red after I build the application. I realize I can choose the colors but
-
Coldfusion query of queries error
I have a long query named "Results.Itinerary" in a CFC which I have to add this query to. <CFLOOP QUERY = "Results.Itinerary"> <CFQUERY NAME = "GetPorts" DATASOURCE="x"> SELECT * FROM Itinerary_Ports WHERE (ItineraryID = #ItineraryID#) AND (Name NOT
-
Table for invoice mailing address
hi gurus, is there any database table for the invoice mailing address? thanks.