System wide alert(notification)

Can we show system wide alert(notification) using any of the J2ME MIDP 2.0 function. It is something like we have our MIDlet is runing, and the we move to some other screen, likeContacts or Message, and afterwards some activity takes place in our MIDlet running in background, so can we show some notification or alert at that time to let user know for that activity without being actually in that MIDlet.
Do reply.

Josef,
Somewhat chasing the point here - when you have the Solman and you look in your CCMS and you can see the other systems - it is all RFC data and not actually on the Solution Manager (the only local MTE's are those tha belong to the Solution Manager). For the Solution Manager to Centrally Auto-React to threasholds (act as the CEN System), the information needs to be passed to the Central System through the agents.
If you want to do email threasholds on your remote systems, you can configure it on each of the systems individually without agents as this is a CCMS Function that any SAP System can do - but this is not Central Auto-Reaction. This is just actions taken on individual systems based on local MTE's.
To Centrally Auto-React - you have to add the agents so the information is passed to the CEN to react on.
I hope that this has clarified the situation a bit more. If this answers your question, please set this thread to answered.

Similar Messages

Toggle on/off Notifications system wide

Seeing as how there is no iOS community (don't see it anyway), I'm asking this here.
I don't think it's possible, but it would be nice to toggle on/off Notification center system wide. As it is now, I have to turn Notifications off for each individual app.
Sometimes i want NO notifications at all (like while watching a movie with someone who I might not want to see all of my notifications) and it would be easier to just turn them off, with one toggle, and turn back on again when I am ready to have notifications again (remembering which apps I had notifications turned on and which ones I didn't).

Do Not Disturb
http://support.apple.com/kb/HT5463
Message was edited by: Demo

Alert notification configuration for Deadline

We are in SRM7.0. For Sc and PO,I have to send alert when the workitem is not processed for 48 hours. I did the configuration in SPRO. The system is trying to send the alert. Whne I check the log in SLG1, it is giving the error message as 'No alert category found'.
When I check the SOST, I see mails with subject 'Alert could not be delivered. Please check document &OBJECT_ID&'. All are in
error status. The send method used is 'RML'. I could see the message 'Cannot process message, no route from <user1> to <user2>.
In SCOT, there is no node created under RML.
Can anyone help me in configuring this alert notification for deadline?
Thanks,
Sivagami

Hi
Did you Verify your configuration in IMG > Application Server>Basis Services-->Generic Business Tools --> Alert Management
These configurations are required for you to set up Deadline monitoring
1. IMG activity Define Transaction Types
2. IMG activity Define Events
3. IMG activity Define Alert Categories - In the event schema the alert categories are assigned as Subcategories only to events that are to generate alerts. They determine the recipients and the subscribers ( Subscription) and also the short and long text of the alerts. SRM supplies a predefined alert category for the relevant object type in the classification SRM Alerts and you can copy and modify this.
This is done in Event Control for the Object TYpe and Event Schema Combination in Deadline Monitoring COnfiguration under Process Controlled workflow configuration. Make sure each event which you are scheduling is having a Event Category and Subcategory of the Event. Seems you are missing something here.
For more information, see the Help Portal under
http://help.sap.com/ -> SAP R/3 Enterprise, Release 4.70 -> SAP-NetWeaver Components -> SAP Web Application Server -> Basis-Services / Communication Interface -> Business Workplace and Services -> Alert Management -> Alert Category
4. Then you schedule Background job for generating Deadline Alerts. Job SWWDHEX is schedule for this purpose. This is done in Automatic Workflow Customizing(SWU3) --> Maintain Runtime Environment -->Schedule Background job for Missed Deadlines
See also
Note 1051787 - SRM notifications not displayed in UWL
Regards
Virender Singh

E-mail Alert Notification Action doesn't work

Don't receive Alert notifications on email.
Attributes-> Actions-> Critical Action send to email.
At occurrence Critical Alert of the notification are not sent on email.
If a host or the agent are not accessible, the notification is sent on my email.
How to solve this problem or where see Actions log.
I use the built in module of sending notificationns email.sh.
Whether it's necessary to adjust on each server "Sendmail" for sending notifications or to adjust "Sendmail" on a server where it's installed SunMC.
Enough in that case it's better to use Halcyon PrimeAlert EventAction????
Any Idea?

You're right: if you're using the default out-of-the-box email actions, then you need to make sure sendmail is set up on every system with an Agent.
Quite often production systems are running restricted Solaris installs without sendmail, or are behind a firewall that denies email.. that's when you'd really want EventAction (so you only need sendmail on your SunMC Server).
EventAction really is the way to go for any kind of SunMC notification/integration... ...but I work for Halcyon, so you have to assume I'm a biased vendor :)
Regards,
[email protected]
http://www.HalcyonInc.com

Alert notification whenver stock is posted to a Sto location

Hi Gurus,
My client has following requiremets:
1 An alert notification to be generated to QC department whenever the stock is posted to the sto loc QCH1(inspection lot number should be updated in the alert)
2 An alert to be generated QC department whenevr there is sales good return.(The sto loc is GRN1)
Please guide me how this is possible.
Do we need to use workflow or some enhancements.
Please give details about how to proceed with the enhancements.
Thanks iin advance
Regards
Ankush

Hi
I think you did not understand my earlier reply. Whenever GR is made when you tick print and choose individula slip in genral tab the requirement is triggered for a message. Utilize that for notification. It can be sent as mail or idoc which can be received in 3rd party system as well.
In output determination for your inventory message schema you should have your output type. (config in output determination)
Then maintain condition record in MN21 for your output type, transaction/event type WE, Print version is 1, print item also 1, and choose simple mail option, send immediatly option and in communication give receipient. It will work as a simple mail
Regards
Antony

Alert Notification Email - Information Broadcasting

Dear Forum members ,
I am wondering to setup an alert notification email for Information Broadcasting, so if the job for any reason was failed then system will send an alert notification email to SAP Administrator person
Is any body can help to solve my question ?
Thanks for any help
Regards
udinpetot

Hi Peggy,
I got a similar requirement but cant able to find a solution for this. Please help me if you have a solution.
A email notification need to be sent to the recipient email id maintained in the broadcaster setting, if the broadcasting fails due to any particular reason.
I started to write a custom program to determine the broadcasting log, but i was not able to find the link between the broadcaster setting and its log (particularly for the scheduling option)
Please let me know if there is any better solution than the custom program.
Thanks a lot for your help
Thanks.
Suresh Kumar

System-wide alarm in iPhone SDK

Is there an equivalent of CalAlarm class in the iPhone SDK? Does anyone know how else we can set a system-wide alarm?

Until push notification is added to the SDK, you cannot set a system-wide alarm.

Iview for UWL not show the tab(Taks, Alerts, Notifications, Tracking)

Dear experts.
I am facing the following issue.
In the MSS for the Workset: Work Overview , for UWL the system not show the tab(Taks, Alerts, Notifications, Tracking), ie the system not show none tab, show a page in blank.
My question is: What is the cause of this issue?
Thanks in advance
regards

use the standard role for UWL, ie check if you are using any modified XML for uwl
This happens if you use custom XML and hide the tabs
Enable the support information for UWL and check in UWL administration
check here
https://www.sdn.sap.com/irj/scn/wiki?path=/display/bpx/uwl+faq
http://wiki.sdn.sap.com/wiki/display/TechTSG/%28UWL%29Navigationnodeca
nnotbeselected
If you only have the .tra and .001 files on the system (and the
standard files) then you can proceed as follows:
So what do we need to do to fix this?
This is a known issue with the MSS system and the generated XML f
However, the fix is quite simply achieved...
For both the .001 and .tra xml files you will need to do the foll
1. Download and save your config for both com.sap.pct.erp.mss.001
com.sap.pct.erp.mss.tra:
2. Open the saved version and save the file with a new name.
Access the configuration file within the zip file and proceed to
the following changes:
I would like you to navigate to the following place in your XML f
<! Work Center UWL shows the same
entries as Control Center UWL >
<NavigationNode name="root"
view="" referenceGroup="">
For every navigation node that has a full path assigned I would l
you to delete up to and inclusive of the last full stop that is
listed in the node. Here is an example for you:
a) first node identified is that fits the criterion above is:
<NavigationNode name="com.sap.pct.erp.mss.Alert"
or check here
system admin, system config
UWL and Workflow
UWL adminsitration
Click to Configure Item Types and Customize Views Using a Wizard
Customize the look of the UWL main page
Select the alerts tab
Click the remove tab from current view button
Then click save and return. The tab is now gone from the UWL UI.

Alerts & Notifications in ESS/MSS

How do set up alerts, notifications and tasks that go into the Universal Worklist?
Is this governed by workflow or a change in ERP Infotype data?
Thanks
WB

Will,
What you need to do is create a System Connector to connect to the ECC system and all the available tasks in SBWP will be available in the portal UWL....if you want to show custom tasks of a Custom Workflow you need to add them as attributes in the UWL XML file.....
You can also define action event handlers in the XML file which will allow you to open specific iviews,pages on the click of a button in UWL....
You can also customize the UWL to change the arrangement of the Tabs like tasks,Alerts etc..
If you want to show all the R/3 Inbox emails you can go for the SONIC connector which has to be downloaded separately from SMP and deployed using SDM...
Refer to the following links for UWL configuration in detail:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/70f43b13-284f-2a10-5898-93fe3dc004b4
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a3461636-0301-0010-3787-978f5ac8bd45
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/904ca240-63bc-2a10-1c98-de81b6a045bf
Hope this helps.
Shikhil

Cisco IronPort Alert Notification 12/15/2011

To Cisco IronPort customers:
License key notification emails that were sent from Cisco IronPort yesterday between 11am and 4PM PST and that appear to have incorrect end dates can be disregarded. The key information within those emails contained old data. Customers can view their correct license key information through the Cisco IronPort appliance GUI.
We sincerely apologize for any confusion this has caused.
Best regards,
Cisco IronPort

Hi, this is a (XML) report generated by AutoSupport feature. It contains information about alerts, uptime, output of status command etc.
AutoSupport is used by Cisco to better support and design future system changes and it can be used for some troubleshooting purposes also.
AutoSupport can be enabled/disabled in System Administration -> Alerts -> Alert Settings.
You can choose to send these reports only to the Cisco and not to send weekly reports to system users configured on the appliance by removing checkbox "Send copy of weekly AutoSupport reports to System Information Alert recipients.". Reports are sent to users configured to receive system alerts (info level).

Exchange2013: EAC Clear Alerts/Notifications

New to Exchange 2013 so not sure if the Alerts/notifications in the EAC go away on their own after a certain period of time or can they be cleared somehow? Thanks.

Hi
If notification items are left in the arbitration mailbox, they will be removed by the Managed Folder Assistant after 30 days because they are stamped with the AsyncOperationNotification system retention tag.
Ref: http://thoughtsofanidlemind.com/2013/01/16/exchange-2013-alerts/
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Music pauses on my iPhone 5C when switching between apps or when receiving alerts/notifications sometimes (not always) and I have to manually restart the song. I'm running the latest 7.0.1 software. It's a bit annoying.

Music pauses on my iPhone 5C when switching between apps or when receiving alerts/notifications sometimes (not always) and I have to manually restart the song. I'm running the latest 7.0.1 software. It's a bit annoying.

I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

File Type Associations Do Not Stick System-Wide CS4

When I set File Type Associations for PSD, Tiff, DNG and Jpeg fles in Bridge CS4 so that my files will open in PS CS3 (and insure that the same file associations apply in Bridge CS3), this works as it should from within CS4 and CS3, but it is impossible to introduce a system-wide change in Mac OS 10.5.5 via File-Info. It always reverts to CS4 for these file types, if I try to 'modify all'. The same thing happened when I upgraded from CS2 to CS3.

If File Type Associations are set properly in the Bridge preferences, the default setting can be made to open files in PS CS3, with CS4 installed. This works from within CS3 and CS4. However, it sometimes happens that one is in the Finder, and the default remains PS CS4, however much one tries (via File-Get Info) to modify the default system-wide settings so that these files open in CS3. In any event, a bit invasive. Of course, if I could get comfortable with the Adjustment Layer Panels, all this would be unnecessary, but for the moment, there appear to be too many clicks, and it is going to take some time, so I don't want to burn bridges. Perhaps there is also some ambiguity in my mind as to what the pointing finger in the new Curves dialogue box, much like a tolling bell, is trying to tell me.
But thanks, once again Anne, for your good-natured help.

System-wide spell check will not work

Hi,
I can't get the system-wide spell check to work on my MacBook Pro with the Command + Shift + ; (semicolon) keys. Does anyone know of a solution to this problem? The Spell-Check on the Fly will work.
Thank You,
Guy

I was able to zap the pram and that solved the problem.
Guy

ITunes 10.7 crashes all apps on Mountain Lion including Force Quit. First system wide prob with an apple computer since OSX introduced. Any ideas?

updated to iTunes 10.7 from app Store last night. After the update, iTunes opens then stalls with the "spinning pizza wheel". Force Quit is unresponsive and will not shut it down. If I then open other applications say Safari for example, the problem migrates over to Safari and it similarly stalls and becomes unresponsive. The only way to solve the problem is to manually shut the computer down. This is the most significant problem I have experienced on an apple computer since OSX was introduced because it impacts on Force Quit which means that you have to shut the whole deal down. There are obvious problems for use of Apple TV and apple store etc. ! I am running mountain lion 10.8.1 on a 27" iMac with 2T Time Capsule connected wirelessly. How do I downgrade iTunes back to 10.6? I had no problems with Mountain Lion or iTunes up to that point.

this is the exact same problem i've been dealing with for the past 2 days. after i installed itunes 10.7 for my iphone5 it would crash my mbp's lion system wide. i tried every solution i could find on google and i've actually had to reinstall lion & time machine my backups because of it. right now i'm too scared to redownload itunes 10.7. i actually feel like waiting for the "new itunes" that comes out in october.

System wide alert(notification)

Similar Messages

Maybe you are looking for