Systemd --user can't create cpu cgroup

Hi,
recently I've started using 'systemd --user' to manage my sessions. I've followed the wiki and created xorg.service and several others. Then I configured cgroup controllers in /etc/systemd/{system.conf,logind.conf,user.conf} as follows (only relevant changes are shown):
$ logind.conf
[Login]
Controllers=cpu memory blkio
ResetControllers=
$ system.conf
[Manager]
DefaultControllers=cpu memory blkio
#JoinControllers=cpu,cpuacct,cpuset net_cls,net_prio
$ user.conf
[Manager]
DefaultControllers=cpu memory blkio
When I start 'systemd --user', I get the following error (systemd starts fine, but cpu controller for user isn't created):
Failed to create cgroup cpu:/user/lahwaacz/8/systemd-11815/xorg.service: Permission denied
edit: the error shows up for every service started, not just for xorg.service
I guess this is why the default is 'ResetControllers=cpu', but haven't found anything specific to the error. Anyone has experiences with similar issues, or anything helpful?
Thanks
Last edited by lahwaacz (2013-01-09 17:09:00)

I found a fix online that removing the SIP information will fix the issue. It did but when I do that they have no control over their phone from Lync.
Hi,
would you please elaborate about the message above you provided? Did "SIP information" mean user profile?
If yes, it maybe the issue of address book sync. you can try to force Lync to immediately download the address book with the following way:
execute the following command from the Windows Command Prompt run as an administrator;
reg add HKLM\Software\Policies\Microsoft\Office\15.0\Lync /v GalDownloadInitialDelay /t REG_DWORD /d 0 /f
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Similar Messages

User can't create, edit, or remove groups and fix I found causes more issues.

Hello!
I have a user that can't create, edit, or remove groups within Lync client 2013. I found a fix online that removing the SIP information will fix the issue. It did but when I do that they have no control over their phone from Lync. So I
added the SIP information back and then the original issue comes back. Is there a way I can have both? We are using the 2013 client but are running Lync 2010 on the server.
Thanks!

I found a fix online that removing the SIP information will fix the issue. It did but when I do that they have no control over their phone from Lync.
Hi,
would you please elaborate about the message above you provided? Did "SIP information" mean user profile?
If yes, it maybe the issue of address book sync. you can try to force Lync to immediately download the address book with the following way:
execute the following command from the Windows Command Prompt run as an administrator;
reg add HKLM\Software\Policies\Microsoft\Office\15.0\Lync /v GalDownloadInitialDelay /t REG_DWORD /d 0 /f
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

User can't create new folders

A user on the network can't create any new folders on the network or the hard drive itself, message reads that the system has reserved these names etc. but it's rejecting any name regardless

Need much much more detail.
"A user"
What type of user? Windows, Mac, OS Version, etc.
"create folders on the network"
I assume we're talking about creating folders on an OS X Server?
If so, what OS X Server version? Any specfics you can provide about the config would be helpful
"or the hard drive itself"
What hard drive? Are we talking about the user's hard drive or is the server logging in locally to the server?
"reserved names, etc"
An exact error would be helpful
Please take some time provide as much information as possible and also what steps you may have taken to troubleshoot.
Thanks

User can not create the quotation in PCUI

Dear All,
User salesrep is not able to create the quotation in PCUI. When he select the quotation tab and click on create button one pop up appears but no quotation appears in it and he can not select it for creating the quotation.
I have checked the authorization objects for this user. Seems everything is ok from authorization point of view.
User has authorization to create, display and delete for quotation in object CRM_ORD_LP.
Please help me regarding this.
Regards
Pankaj Vispute

Hi,
Please check whether u have assign transaction type of quotation and iviews to salesrep user from Portal admin and related portal role to u r User.
Regards,
DD's

Account mail for user can't create after create new users account

Hi,
I have a recent installation of Server MacOS X 10.5 like advanced server. The services DNS, DHCP, OPEN DIRECTORY and MAIL are lifted and they work very well.
Now when I believe a new user account, it is not also believed the mailbox of messages in the mail server in spite of activating the electronic mail service in the user's account.
Please somebody can help me.
Thank you!

Mailboxes are created only when they either receive mail for the first time or are accessed via IMAP the first time.
HTH,
Alex

Role in UME whereas user can be created only in ABAP

Hi experts,
I want to create a user with a MDM EC Administrator role in my WAS Java UME. But i get the following exception while doing so:
1.5#001CC46BDFC200660000153C0000108000044D2CF9474AB3#1210755462890#com.sap.security.core.persistence.datasource.imp.R3PersistenceBase#sap.com/tc~wd~dispwda#com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.createPrincipalDatabag()#J2EE_ADMIN#305344#SAP J2EE Engine JTA Transaction : [631ffffffd660226ffffffb5]#IWDFVM2160.wdf_ERP_103929350#J2EE_ADMIN#72cab7e0219311dd998a001cc46bdfc2#SAPEngine_Application_Thread[impl:3]_4##0#0#Error#1#/System/Security/Usermanagement#Java#An exception was thrown in the UME/ABAP user management connector. Message: {0}.##An exception was thrown in the UME/ABAP user management connector. Message: {0}.
[EXCEPTION]
{1}#2#BAPI_USER_CREATE1@ERPCLNT001: ID=01, NUMBER=491, MESSAGE=You are not authorized to create users in group#com.sap.security.core.persistence.datasource.PersistenceException: BAPI_USER_CREATE1@ERPCLNT001: ID=01, NUMBER=491, MESSAGE=You are not authorized to create users in group
at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.handleBapiRet2Table(R3PersistenceBase.java:1186)
I problem is - role is existing in UME whereas i could create users only in ABAP. This role is not even visible in the ABAP side!
Is there any way to assign this role to that user?
Thanks in advance
Swarna

you can access the users at http://<host name>:5<sys.no>00/useradmin
You will get to see all the users you created in WAS ABAP... and here you can attach the j2ee roles to him..
Please come back if this reply doesnot answer you..
Award points if this found helpful

User can't create folders on Share point

The users is on 10.4.3 trying to create a new folder on a share point on a 10.3.8 server. All permissions in workgroup manager are correct with regards to the particualr share point. The user was able to create the folders about 3 weeks ago and then when she tried to create a folder, it came up with the error 'You do not have the permissions'
I have re-copied all permsions to the share point, run repair permissions on the server and the user's machine.
The user is logging in to a roaming account on the server.
Although they do not have permissions to create a new folder they can save any document into any folder that is already created on the share point.
Anyone have any ideas?

Thanks for all the help on this one. If anyone else has this problem, a full re-install of the local machine seemed to work.

New user can't create an account!

PLEASE HELP I'M GOING CRAZY HERE
When I first got my ipod (friday night) i checked out the music store and started to create an account. when i realized i needed a credit card i had to log off untill i found my wallet (hah)
now i can't seem to get passed the 2nd page. The progress bar continually stalls / freezes a half inch from the end.
i have tried all the usual suspects: restarting, etc. and think i have exausted all options that i could find in the help articles.
it almost seems like it's a "busy" day on line. i have dial up - i know a faster connection is better, but please don't tell me i NEED one!
thanks,
kim

i use dial up too and while it is sooo ssslllooowww. it works ok for me though. has your credit card expired, this happened to me, and it said nothing, just wouldn't log on. try deleting the preferences file, this often fixes glitches. also check that you have a valid apple user id. good luck!

New Numbers User - Can I Create Monthly Invoices Which Update

Hi All,
I run a small business that creates around 40 invoices a month. Each invoice goes to the same customer each time, and only the invoice date and date range period (i.e, 01/09/08 - 30/09/08) the invoice covers need to be changed. Everything else is the same month in month out.
Is there anyway I can set numbers up to generate a new invoice at the end of each period so all I have to do is save the file and print it out?
Would save me a stack of time.
Thanks in advance.
Stuart:-)

Here is the required script.
property lastRun : missing value
on run
set myInvoice to "myInvoice.nmbtemplate"
set theDate to current date
if lastRun is missing value then
set maybe to theDate
else
set maybe to lastRun
end if
if (month of (theDate + (1 * days))) is not (month of maybe) then
set chemin to (path to application support from user domain as text) & "iWork:NumbersEnglish:Templates:My Templates:" & myInvoice as alias
tell application "Finder" to open chemin
else
set lastRun to theDate
end if
end run
Save it as an application package and install it as a "open at startup" item from the System Preferences Pane "Account > Login".
Yvan KOENIG (from FRANCE vendredi 19 septembre 2008 13:36:11)

Is there a way to have a wiki on osx server where users can be created at first logon? (for a semi-public wiki)

Hello,
I am installing an osx server that will be primarly used as a wiki for collaboration.
Problem: there will be many users from various organisations -> creating users manually on the server is not an option.
Is there a way to have a page/something where users will login and the account will be created at first logon? (after being approved if possible).
I'd want my users to go to the wiki and do something like click a "new user" or "create account" button then fill a form. The account in th directory would be then auto magically created.
Does this feature already exist for osx server with the built-in wiki?

Just generate the TTS on a separate slide and then assign the audio file created in the LIbrary to whatever object you need.

After deleting old default calendar, user can't create events

Hello
an User had two agendas. they asked to delete the old default agenda. and change the default to a new agenda. after this has been done, the user is not able to create new appointment in his agenda.
I changed the default agenda using csattributes. I sure forgot to set permissions somewhere.??
thank you.

yes it does but it has a very special format which i do not understand.
i found this out by using csattribute -v list username:
uid=grochtus,ou=rbgMember,ou=people,ou=mrbc-mbhg,dc=irisnet,dc=be has icsCalendarOwned: grochtus:geert_rochtus_dircoco$geert_rochtus_dircoco
what does the $ mean?
the name of the calendar is :
uid=grochtus,ou=rbgMember,ou=people,ou=mrbc-mbhg,dc=irisnet,dc=be has cn: Geert ROCHTUS
uid=grochtus,ou=rbgMember,ou=people,ou=mrbc-mbhg,dc=irisnet,dc=be has icsCalendar: grochtus:geert_rochtus_dircoco
another thing that came up is that this user is able to DELETE events but not able to create.

How many users for remote connection can I create, from support SAP

Dear all
I have a doubt with how many users can be created in my system ERP 6.0 for the remote connection, for the error product messages on the marketplace SAP,without this counts as user license.
I have not found any notes or documents from SAP to explain this.
I appreciate your help.
Best Regards,
Erika

Ok...I will reply to myself. I can use more than 10 simultaneous connection, using vnc.

How many users/ schemas can we create in an oracle database?

How many users can we create in an oracle database? Or how many users can oracle handle?
Problem-
I have to store information of ontologies (I will use countries instead) in db.
I have to store information regarding countries.
I have 13 tables in all to maintain for each country.
Now there are two approaches:
1) keep only 13 tables. Have an extra column in each table to indicate that a particular
row stores information for which country.
2) create a new user/ schema for each country. So we can get rid of the extra column
needed in 1st approach.
I have used the second approach. This is because number of entries in each table for a
given country will be large.
So initially when the s/w is installed I create a central-user. Each time data for new
country has to be entered central-user creates a user/ schema, and creates tables for
this user/ schema. The central user can access the tables of all the countries by
country_name.table_name. By this approach I believe searching would be easy.
If there is any flaw in my approach kindly mention it.
Thank you

There is no (practical at least) limit to the number of users & schemas you can have in Oracle.
Your approach, however, is not going to scale nearly as well as the first option you outlined (adding a column). You are going to end up caching every possible variation of the various queries you're going to be executing because you will be referring to so many different tables, which is going to mean that you are doing a lot more work to parsing statements and generally churning through the shared pool. If you create enough users, you're liable to start hitting ORA-04030 errors because your shared pool is so fragmented.
Additionally, you're likely going to end up with a whole lot of dynamically generated SQL to accommodate new schemas getting added over time which is going to cause you even more pain. Figuring out dynamically what table to join in is a heck of a lot more difficult for the programmer to write and for the database to handle than simply passing in a different country code.
If you're concerned about having too much data, you can have your cake and eat it to by adding the country column and partitioning the tables based on country.
Justin
One other item I forgot to mention is maintainability. Having dozens or hundreds of "identical" schemas makes maintenance a huge pain because something like adding a new column now requires dozens or hundreds of separate DDL statements. You're almost guaranteed that some schema isn't going to be in sync-- it's going to miss a column or miss an index, etc.
Message was edited by:
Justin Cave

[Solved] Starting systemd --user as a systemd --system process?

Hey guys,
I would like to run systemd --user as a system service using this .service file I wrote:
$ cat [email protected]
[Unit]
Description=Systemd --user instance for %I
Documentation=man:systemd
[Service]
User=%I
ExecStart=/usr/lib/systemd/systemd --user --log-level=debug
[Install]
WantedBy=multi-user.target
I enabled it for my user using `systemctl enable systemd-user@evan`, however, when starting it it fails with the following errors:
Jul 21 21:14:42 desktop systemd[12920]: systemd 204 running in user mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
Jul 21 21:14:42 desktop systemd[12920]: Using cgroup controller name=systemd. File system hierarchy is at /sys/fs/cgroup/systemd/system/[email protected]/[email protected]/systemd-12920.
Jul 21 21:14:42 desktop systemd[12920]: Failed to create root cgroup hierarchy: Permission denied
Jul 21 21:14:42 desktop systemd[12920]: Failed to allocate manager object: Permission denied
Is it possible to run systemd --user like this? Do I need to add something to my [email protected]?
Last edited by EvanPurkhiser (2013-07-22 02:10:10)

EDIT: I just realized that the systemd-user-session-units package will only include specific units at build-time weather I have have the programs or not. You're right, I should just use this package!
Well, to be honest, maybe I'm trying to hack around a problem that doesn't even really exist, but I don't think the systemd-user-sessions-units package meets my needs.
The way I would like to have my user sessions setup is something like this:
I would like to have an instance of systemd --user always running under my user so I can keep things like transmission-daemon always running, even when I don't have a user session open. When I do start my user session (via logging into getty) I want to bring my systemd instance up to a certain target. For example, logging in via tty1 should bring up graphical.target, which will start X11 and all that, while logging into any other tty will start console.target (for stuff like ssh-agent etc).
Thinking more about this I suppose there's really no reason I couldn't use the [email protected] from systemd-user-session-units, but since I won't use most of the other user units included, I would rather just not use it.
Here's what my .profile looks like:
if systemctl -q is-active systemd-user@evan
then
# Default systemd to the console target
target="console"
# If we're logging in from VT1 start the graphical target
if [[ $XDG_VTNR == 1 ]] && ! systemctl --user -q is-active graphical.target &> /dev/null
then
export DISPLAY=:0
target="graphical"
fi
# Set all environment variables in the systemd --user instance (still working on this)
env | systemctl --user set-environment -
# Bring up systemd --user to the specified target
systemctl --user start ${target}.target
fi
source "$HOME/.bashrc"
Last edited by EvanPurkhiser (2013-07-22 03:56:13)

Users unable to create or delete folders in migrated public folders using Outlook

We have an Exchange 2013 CU3 environment migrated from Exchange 2007.
The public folder migration was completed over the weekend.
The environment has several public folder mailboxes.
Post migration users are unable to create/delete new sub folders, or modify permissions using Outlook on any of the migrated public folders. Users can however create new top level folders using outlook. They can also create and delete new posts
in migrated public folders.
Admins are able to create folders and set permissions on migrated folders using the EAC.
Test User accounts used for testing are set to use the Primary Hierarchy mailbox as their default public folder mailbox.
Test Users have been given Owner permissions from the root down on the folders we are testing with.
We have tested with Outlook 2010 and 2013 getting the same "Cannot create the folder" error.

Further testing
We moved a top level folder from a secondary PF mailbox to the primary PF mailbox using the New-PublicFolderMoveRequest command in powershell.
After the move completed we could create new folders under the moved top level folder.
The top level folder that was moved had it's own sub-folders that we did not move to the primary mailbox. (We didn't move the whole branch.. Just the top level folder)
We still cannot create or modify the existing sub-folders after moving the top level folder.
We then moved the newly created sub-folder to a secondary PF mailbox.
At that point we could no longer create sub-folders in the folder form outlook.
From what I can tell you can only create new sub-folders in folders homed to the primary PF mailbox when using outlook.
Is this a bug or as designed?
According to this Tech ed presentation Clients connecting to a secondary PF mailbox should have folder changes proxy to the primary PF mailbox.. (See slide 10)
http://channel9.msdn.com/Events/TechEd/NorthAmerica/2013/OUC-B329#fbid=
Update : 2-5-2014
Not much new to report other than it appears that users need to be homed to the primary PF mailbox to delete calendar meetings.
Opened a ticket with Premier support.
Update 2-11-2014
Premier support continues to look into the issue. No ideas as to the cause yet.
2-24-13
Still no resolution from support or even a clue what is causing this.

Systemd --user can't create cpu cgroup

Similar Messages

Maybe you are looking for