Systems Management Component

Can someone please give me details on the purpose and use of the Systems Management component of OBIEE or point me to documentation? I have not been able to find any details.
Thanks!

Hi Christian,
you can get a trial version of MDM as a SAP customer (in Germany via your SAP software distributor). If you have only access to a SAP university system I don't think you will get access to MDM and XI (at least they don't have it at my university). But of course you can ask your professor or SAP representative maybe they can help you. As far as I know all SAP university systems in Germany are hosted centrally in Munich and I don't think that they also provide such special solutions like MDM.
Doing a similar job in my thesis I can only recommend you to do this project only then if you have definitely access to all needed systems and having some people around with knowledge in additonal needed tools like XI or administration of SAP systems. Doing it all at your own without having SAP knowledge in the important points (system and database administration, software deployment, XI) is not realistic in a 5 month period when you have to build a SAP system landscape on your own in top of your project.
Hope that helps. BR, bd

Similar Messages

  • ERROR MESSAGE sap system manager:work process restarted, session terminated

    Hi,
    i am a beginer in SAP administration, users are getting this error message and i have done all my research and not able to resolve this issue. Here are the details
    SAP Version :ideas 4.7
    Database :Oracle
    OS : windows 2003
    Module user is working on MM
    user working on it is a Super user with all the permissions
    SAP is configure to run under the  European date and decimal format.
    I have never done any database administration on it, it is a new install and has been rarely used.
    User creates a RFQ and when he tries saving it , seems like for the first time after either restarting the macine or restarting the service it might work and at time it might not, this is a very sporadic error and most of the times it crashes out with the message "sap system manager:work process restarted, session terminated" and kicks the user out of the session.
    Below are the details of the error message from ST22 :
    name of the runtime error : system_core_dumped
    below are the details of the error message and its resoltion as suggested by sap help :
    ========
    Runtime Errors         SYSTEM_CORE_DUMPED           
           Occurred on     01.02.2008 at 07:52:19
    Process terminated by signal " ".                                             
    What happened?
    The current ABAP program had to be terminated because the                     
    ABAP processor detected an internal system error.                             
    The current ABAP program "SAPLCLSC" had to be terminated because the ABAP     
    processor discovered an invalid system state.                                 
    What can you do?
                                                                                    Make a note of the actions and input which caused the error.                                                                               
    To resolve the problem, contact your SAP system administrator.                                                                               
    You can use transaction ST22 (ABAP Dump Analysis) to view and administer      
    termination messages, especially those beyond their normal deletion           
    date.                                                                               
    Error analysis
    An SAP System process was terminated by an operating system signal.           
                                                                                    Possible reasons for this are:                                                
    1. Internal SAP System error.                                                 
    2. Process was terminated externally (by the system administrator).           
               Last error logged in SAP kernel                                    
                                                                                    Component............ "Taskhandler"                                           
    Place................ "SAP-Server server1_DEV_00 on host server1 (wp 1)"      
    Version.............. 1                                                       
    Error code........... 11                                                      
    Error text........... "ThSigHandler: signal"                                  
    Description.......... " "                                                     
    System call.......... " "                                                     
    Module............... "thxxhead.c"                                            
    Line................. 9555                                                                               
    How to correct the error
    The SAP System work directory (e.g. /usr/sap/c11/D00/work ) often             
    contains a file called 'core'.                                                                               
    Save this file under another name.                                                                               
    If you cannot solve the problem yourself, please send the                     
    following documents to SAP:                                                                               
    1. A hard copy print describing the problem.                                  
       To obtain this, select the "Print" function on the current screen.         
                                                                                    2. A suitable hardcopy prinout of the system log.                             
       To obtain this, call the system log with Transaction SM21                  
       and select the "Print" function to print out the relevant                  
       part.                                                                               
    3. If the programs are your own programs or modified SAP programs,            
       supply the source code.                                                    
       To do this, you can either use the "PRINT" command in the editor or        
       print the programs using the report RSINCL00.                                                                               
    4. Details regarding the conditions under which the error occurred            
       or which actions and input led to the error.                                                                               
    System environment
    SAP Release.............. " "                                                                               
    Application server....... " "                                                 
    Network address.......... " "                                                 
    Operating system......... " "                                                 
    Release.................. " "                                                 
    Hardware type............ " "                                                 
    Character length......... " " Bits                                            
    Pointer length........... " " Bits                                            
    Work process number...... " "                                                 
    Short dump setting....... " "                                                                               
    Database server.......... " "                                                 
    Database type............ " "                                                 
    Database name............ " "                                                 
    Database owner........... " "                                                                               
    Character set............ " "                                                                               
    SAP kernel............... " "                                                 
    Created on............... " "                                                 
    Created in............... " "                                                 
    Database version......... " "                                                                               
    Patch level.............. " "                                                 
    Patch text............... " "                                                                               
    Supported environment....                                                     
    Database................. " "                                                 
    SAP database version..... " "                                                 
    Operating system......... " "                                                 
    User, transaction...
    Client.............. " "                                                      
    User................ " "                                                      
    Language key........ " "                                                      
    Transaction......... "ME41 "                                                  
    Program............. "SAPLCLSC"                                               
    Screen.............. "SAPMM06E 0320"                                          
    Screen line......... 71                                                       
    Information on where termination occurred
    The termination occurred in the ABAP program "SAPLCLSC" in "EXECUTE_SELECT".  
    The main program was "SAPMM06E ".                                                                               
    The termination occurred in line 131 of the source code of the (Include)      
    program "LCLSCF2G"                                                           
    of the source code of program "LCLSCF2G" (when calling the editor 1310).      
    =============
    i even tried increasing the dialog processes but with no use.The same error occurs.
    I appreciate every one of help i can get, i am working on a deadline which is tomorrow evening to resovle this issue, any kind of help is highly appreciated.
    thanks
    mudessir.

    Hi
       follow correction method suggested in this dump,
    " The SAP System work directory (e.g. /usr/sap/c11/D00/work ) often
    contains a file called 'core'.  Save this file under another name."
    have you done this?
    with regards,
    raj.
    <i>pls, award points</i>

  • Separate release of SAP Business Rules Management component

    I am evaluating the possibility of using the SAP Business Rules Management for the company. What I have seen till now in SAP is that it is part of the SAP Netweaver composition environment which consists of lot of other components also. I don't want to use the other components. Is is possible to download a trail copy of only the Business Rules management component ? (I don't want to use the BPM and others.)

    Hello Prashanth,
    You can just select the usage type (functional unit) Business Process Management and Business Rules management for installation.
    You can find more information on installation in the guide provided at the SAP service marketplace - https://websmp105.sap-ag.de/installnw73
    Installation guide - SAP Systems Based on SAP NetWeaver 7.3 Application Server Java on Windows: MS SQL Server- https://websmp105.sap-ag.de/~sapidb/011000358700001259982010E
    Best Regards,
    Arti

  • Cannot open connection to dvsrv1: The Synch Manager component on the server

    Hi Experts,
    I extracted batabase for the mobile client successfully, but when trying to initialize the lcal database, Getting the following error:
    Unable to Connect to server>
    <Cannot open connection to dbsrvr1. The Synch Manager component on the server is most likely unavailable.>
    <Internal: connect() failed: Connection timed out.>
    I do not have port number mentioned over here as this installation is in my personal laptop.
    As I understnd all the ODBC connections are working fine. It would be great if get here some suggestion to do some extra check if required.
    In my system DSN in ODBC I could see number of DSN have been present, one for local DBF, one for sample, one for server which I belive I created during the DBserver configuration as external. and could fine one more DSN not sure what for it is.
    If the ODBC would not have been configured properly then I belive I should not be get connected to application through thin and thick client.
    Any suggestion on this would be helpful
    Thanks
    Deepak

    HI Deepak,
    I have seen a similar problem back here there are two locations in your tools.cfrg where you may will need to make changes.
    1.
    [InfraObjMgr]
    RequestServerName =
    2.
    [Local]
    DockConnString =
    In both the cases you need to mention the Application server name .
    Kindly let me know if this actully solves your issue.
    Thanks
    Vishal

  • How to install Order Release Management component

    Hi All,
    I am running APPS R12. I want to install Order Release management component. Can any one help me how to install this component individually.
    Regards
    Nadir Pervez.

    Check the following thread, and follow the steps outlined there. Instead of AX module, search for the product/module which you want to add:
    Add AX module to my system
    Re: add AX module to my system

  • New to System Manager - Advise needed on my requirements

    Hi there!
    I am very new to System Manager 2012, so I am seeking advise on how to best start my project. I read the initial part of the Getting Started guide ( http://technet.microsoft.com/library/dn235548.aspx ), but System Manager is a big product so I need
    to double check the direction I should take, based on my design requirements.
    So here is what I am trying to achieve in two bullet points:
    - I got my own monitoring system application that I can query via an API. The API is REST based (i.e. HTTP GET/POST operations) and I already wrote a Python script to query my API so I can export data and alerts from it.
    - I'd like to integrate the data/alerts coming from my own monitoring application into the Microsoft System center.
    Questions:
    1) in the first page of the Getting Started guide, I can see I am offered the option to download several evaluation virtual hard disks (e.g. App Controller, Operation Manager, Service Manager, Orchestrator, Virtual Machine Manager). Not sure which one I
    should use for what I am trying to achieve?
    2) depending on the component picked in point (1), what's the best documentation link to start studying how the Microsoft application works, and how to integrate the data coming from my API?
    3) is my Python script fine to run on the Microsoft Virtual Machine, in order to query my API and pass the data to the System Manager 2012?
    Thanks in advance for your help, and looking forward to actively join your community!
    Wally

    The system center suite contains several products.
    For monitoring purposes you should look into the Operations Manager product.
    Have a look here for details on OpsMgr:
    http://technet.microsoft.com/en-us/library/hh509025.aspx.
    These forums are specifically for Configuration Manager.
    Tim | Blog |
    @Tim_DK

  • SLD - Logical System Management

    Hi,
    We are implementing XI and we have the problem with SLD logical system management. The problem is that we use the same Logical system name (Ex. PRDclnt350) for all the systems to avoid running lengthy BDLS process when we hook our R3 systems to their respective BW systems.
    Can you please suggest how we take care of this in XI -SLD landscape as it requires unique logical system names for each Business System when maintaining in SLD.
    Can we have multiple SLDs and will it take care of the issue. If so can we take one of them as the master SLD and the rest as slave SLDs. What would be the best practices for synchronizing them. Any help in this regard is greatly appreciated.
    Thanks and regards..
    Haritha

    Hi All,
    We opened an OSS note with SAP regarding this. Please see the question we asked and the response we got from them regarding the SLD maintenance:
    Hi,
    We are on BW 3.5 and SAP ERP 5.0. We are implementing XI now. So we
    need to configure SLD and register our Business systems. The problem is
    we have the concept of using the same logical system for all our SAP
    systems, say WRPCLNT750, when we are hooking our systems to their
    respective BW systems. And in SLD, we have problem becuase of this, as
    it recommends to have unique logical system name for each Business
    System being registered.
    We want to mention some points in here about our landscape and some of
    the recommendations we got from SAP regarding this. Ours is a very big
    warehouse system and in order to avoid the lengthy "BDLS" runs, SAP
    recommended using the same Logical System name for all the SAP systems.
    Hence we are using the same logical system name for our systems.
    So now coming to our problem, can you please tell us what would be the
    best practice that needs to be followed now for SLD Business System
    registration. How can we overcome the hurdle of NOT having a unique
    logical system name for our systems in central System Landscape
    Directory.
    Please let us know the solution as early as possible.
    Thanks and regards..
    Haritha.
    The Response:
    Hello Haritha
    I have found some pass cases with the same question that you have,
    however, the replies from developer are as below.
    Logical systems cannot be duplicated within the SLD, that means one
    Business System per Logical System name, both need to be unique, the SLDis working a designed here.
    I would suggest you rename one of the copies of the productive system
    to solve this.
    My apology that I couldn't provide you a better answer for this.
    Thanks & Best Regards
    Andy Lam
    Active Global Support - SolMan & Technology
    Kindly, please let me know your suggestions.
    Thanks and regards..
    Haritha.

  • Where I can find and use "Java Desktop System Management Tools "

    With Solaris 10, you not only get the Java Desktop System desktop environment, but also the Java Desktop System Management Tools and a selection of free and trial Development Tools, which are available for download only.
    I found only an information about JDS release 2
    but today it's release 3 already and it's said it already integrated in JDS
    and above sentence it state that it already come with solaris 10?
    where i can find that , where i can use it
    http://docs.sun.com/app/docs/doc/817-7575/6mmsrpduj?a=view
    this page said how to install but ...where I can find CD/
    regards please help

    Good question. It appears to have been installed with Solaris 11/06, as I have all of the packages listed here:
    http://docs.sun.com/app/docs/doc/817-7575/6mmsrpdus?a=view
    However, it does not appear in the Java Web Console. I tried adding it using the wcadmin command, but haven't managed to get it to run as per the docs. The documentation assumes that it is already installed and visible in the Java Web Console...
    According to this documentation:
    http://docs.sun.com/app/docs/doc/817-1985/6mhm8o5l6?a=view#gdjpi
    An application for the Java Web Console should have a WEB-INF directory and an app.xml file. The apoc packages come with neither, so something is missing.

  • How to install forms 6i runtime using windows Systems Management Server?

    Hi,
    Our clinents are using oracle forms 5 application and we want to upgrade to forms 6i ( client /server ).
    How to install oracle forms 6i and reports 6i runtime in multiple client machines
    using windows systems management server instead of installing one by one manually.
    Regards

    Here is a quick summary on why this works...
    The Problem:
    The issue relies with the method and logic that MDT’s scripts use to query and validate that the proper disks, partitions and storage space reside before starting the installation of Windows.
    Essentially what you have configured in the Task Sequence and the UNATTEND.xml is analyzed by the MDT scripts then a validation is completed against the hardware in which you wish to install Windows
    on and if there are any errors you will be prompted with MDT Error or Warning dialogs.
    The problem is that the MDT scripts use WMI to query the hard disk, partition and free space requirements for Windows, but in the case of using GPT disk, the 2nd partition (MSR) that you have to create
    is hidden. The class that WMI uses for its query can’t see the MSR partition so instead of 3 partitions, it returns 2 in the query results; hence why DISK 0 PARTITION 3 doesn’t work as mentioned earlier when configured in the MDT Task Sequence.
    Although the above still confuses me as to why it works with DISK 0 PARTITION 2 since the WMI query results return PARTITION IDs 0 and 1 when it should return 1 and 2…
    The Windows Pre-Installation Environment however does see all 3 partitions correctly and we tried configuring in our Task Sequence to install Windows to DISK 0 and PARTITION 2 and in the UNATTEND.xml
    file to install Windows to DISK 0 and PARTITION 3 but due to timing issues of the way Windows installs with MDT, did this not work for us.

  • N1 system manager installation faied (newer version of Java web console)

    Hi,
    I am trying to install Sun N1 system manager on Solaris x86 U3 + all patches. Once I run the installer I got:
    N1SM Installer (version 1.3.2 on SunOS)
    1. Install OS packages. [Completed]
    2. Install Expect. [Completed]
    3. Install IPMI tool. [Completed]
    4. Install JDK 1.5. [Completed]
    5. Install service provisioning components. [Completed]
    6. Install OS provisioning components. [Completed]
    7. Copy DHCP configuration file. [Completed]
    8. Install user interface components. [Partially Run]
    9. Install service container components. [Not Completed]
    10. Install N1 System Manager. [Not Completed]
    Failed Step: Install user interface components.
    The following is a portion of the installer
    log which may indicate the cause of the error.
    If this does not indicate the cause of the
    error, you will need to view the full log
    file. More information on how to do that is
    available below.
    The Sun Java(TM) Web Console software already installed (version 3.0.2)
    is newer than the version (3.0) you are attempting to install.
    Downgrading is not supported. If you wish to run the older version,
    you can install it after unintalling the currently installed version.
    Error running lockhart setup: 1792
    Please fix the problem and then try this step again.
    For a full log of the failed install see the file: /var/tmp/installer.log.9327.
    t. Try this step again (correct the failure before proceeding)
    x. Exit
    Enter selection: (t/x) x
    Is there any way to continue my installation and using currently installed version of Java Web Console?

    Tried removing the currently installed Java Web Console as described at http://docs.sun.com/app/docs/doc/817-1985/6mhm8o5l4?a=view
    It says to simply run /usr/share/webconsole/bin/setup -u, however there is no setup binary in the listed dir.
    # ls -l /usr/share/webconsole/bin/
    total 396
    -r-xr-xr-x 1 root sys 9995 Oct 9 08:18 smcwebserver
    -r-xr-xr-x 1 root sys 6571 Oct 9 08:17 smloginmodule
    -r-xr-xr-x 1 root sys 171907 Oct 9 08:17 smreg
    -r-xr-xr-x 1 root sys 1456 Oct 9 08:17 smwebapp
    -r-xr-xr-x 1 root sys 2917 Oct 9 08:17 wcadmin
    # uname -a
    SunOS host 5.10 Generic_118855-33 i86pc i386 i86pc
    It seems the docs are wrong?

  • Some folders on System Manager are not displayed correctly

    Hi,
    I'm using a Rockwell CLP of family ControlLogix, this CLP communicates with NI OPC Servers. I have created a Process and an IO Server on System Manager
    My problem is: when I browse for TAGs on System manager, some items, who must be folders, are displayed as integers. 
    Same problem occurs when I use PSP Network browser, example tool.
    Bruno B. Costa
    Automation Engineer
    Attachments:
    bug.png ‏45 KB

    Yes these fonts have one feature - see http://developer.java.sun.com/developer/bugParade/bugs/4279855.html
    so you can check them by next way :
         GraphicsEnvironment ge = GraphicsEnvironment.
    getLocalGraphicsEnvironment();
         Font[] fonts = null;
         if (ge != null) {
              fonts = ge.getAllFonts();
         for (int i=0; i < fonts.length; i++) {
              fonts.canDisplay('a');

  • System management software for LV apps on cRIO and Windows

    Hello All,
    Were I work there is a LabVIEW based project that is a distributed system. This system has a main application that can run on Linux, Windows, or cRIO targets. The main application loads "plugins" depending on what platform it is on to do platform specific things. For example, one plugin uses a DLL interface to communicate with OPC servers. Another plugin measures voltages and currents on cards in the cRIO chassis.
    The system occasionally needs updates and the sites where it runs are remote. The current solution is to send a technician who installs a full upgrade. We want to move to a rolling upgrade that is automated.
    We can certainly roll our own solution, but before we do that we want to investigate existing solutions.
    I believe such systems are under the buzzwords System Management Software and WSUS the windows update solution is one of these.
    Is there a System Management Software package that would deploy to cRIOs and Windows machines? (We have the Linux one solved already, although we might redo it if there is something really slick out there.)
    Thanks!

    Hi,
    For cRIO's you might want to have a look at the Real-Time Target System Replication.
    Christian

  • System Management container in Multidomain environment (same forest)

    Greetings,
    The scenario is the following:
    1 root domain. 5 child domains. The schema was extended for Win2008 R2.
    1 primary parent SCCM site (implemented in a child domain. 1 sccm server). 4 primary child SCCM sites (implemented in the 4 remaining child domains. 1 sccm server per child domain).
    All of the SCCM servers are SP2 R3.
    The System Management container was created in all of the child domains and the permissions was applied according to http://technet.microsoft.com/en-us/library/bb633121.aspx
    In every AD site, in System Management container appears the information pertaining to its sccm server.
    The questions are:
    At the AD domain where is the parent sccm site, in its System Management container, all of the sccm servers must be granted permissions?
    The System Management container must be created at the root domain? (and what would be the permissions?)
    Thanks in advance!

    Site servers write their information to the System Management container in their own domain (and only their own domain) thus you need to create the System Management container in each and every domain where there is a site server but only the site server
    in that domain needs to be granted permissions in that domain.
    Clients use the global catalog to query for info so the actual domain where the System Management container or objects contained therein doesn't really matter.
    Jason | http://blog.configmgrftw.com

  • Sun N1 System Manager 1.3.3 install on Solaris 10 u4/T2000 fails

    Hi all,
    I am trying to install 1.3.3 on Sol 10 u4: SunOS 5.10 Generic_120011-14 sun4v sparc SUNW,Sun-Fire-T200
    by going to /mountpoint/Solaris_sparc/Product/installer
    and running "install".
    It fails with this:
    N1SM Installer (version 1.3.3 on SunOS)
    1. Install OS packages. [Completed]
    2. Install Expect. [Completed]
    3. Install IPMI tool. [Completed]
    4. Install JDK 1.5. [Completed]
    5. Install service provisioning components. [Completed]
    6. Install OS provisioning components. [Partially Run]
    7. Copy DHCP configuration file. [Not Completed]
    8. Install user interface components. [Not Completed]
    9. Install service container components. [Not Completed]
    10. Install N1 System Manager. [Not Completed]
    Failed Step: Install OS provisioning components.
    The following is a portion of the installer
    log which may indicate the cause of the error.
    If this does not indicate the cause of the
    error, you will need to view the full log
    file. More information on how to do that is
    available below.
    createdb: database creation failed
    ERROR : Cannot create the database
    pg_ctl: postmaster or postgres is not running
    ERROR: Database initialization failed
    Info: Postinstall complete
    Please fix the problem and then try this step again.
    For a full log of the failed install see the file: /var/tmp/installer.log.751.
    t. Try this step again (correct the failure before proceeding)
    x. Exit
    Enter selection: (t/x)
    =============================================================
    # tail -30 /var/tmp/installer.log.751
    Fixing permissions on existing directory /var/opt/SUNWscs/data/db/mgmt... ok
    creating directory /var/opt/SUNWscs/data/db/mgmt/base... ok
    creating directory /var/opt/SUNWscs/data/db/mgmt/global... ok
    creating directory /var/opt/SUNWscs/data/db/mgmt/pg_xlog... ok
    creating directory /var/opt/SUNWscs/data/db/mgmt/pg_clog... ok
    creating template1 database in /var/opt/SUNWscs/data/db/mgmt/base/1... ok
    creating configuration files... ok
    initializing pg_shadow... ok
    enabling unlimited row size for system tables... ok
    creating system views... ok
    loading pg_description... ok
    vacuuming database template1... ok
    copying template1 to template0... ok
    Success. You can now start the database server using:
    /opt/sun/N1_Grid_Service_Provisioning_System_5.1/server/postgres/bin/postmaster -D /var/opt/SUNWscs/data/db/mgmt
    or
    /opt/sun/N1_Grid_Service_Provisioning_System_5.1/server/postgres/bin/pg_ctl -D /var/opt/SUNWscs/data/db/mgmt -l logfile start
    postmaster successfully started
    psql: could not connect to server: No such file or directory
    Is the server running locally and accepting
    connections on Unix domain socket "/tmp/.s.PGSQL.5434"?
    createdb: database creation failed
    ERROR : Cannot create the database
    pg_ctl: postmaster or postgres is not running
    ERROR: Database initialization failed
    Info: Postinstall complete
    ===================================================================
    It looks like postgres is started by the script but it exits for unknown reason and the
    installation breaks. Can somebody gives me a hint how to resolve this?
    Thanks a lot in advance!
    vladimir

    draglev -
    I had this same error with the same configuration. If SUN set up your box they problem configured root to execute a .profile-EIS. Modify root's .profile so that it does not execute the .profile-EIS. Then try your install again. This worked for me.
    Thanks

  • HT3964 Hi my MacBook is freezing whenever I try to open an application. I have tried resetting the system management controller, however no success. How can I wipe my hardrive and reinstall it again. PS: I no longer have the installation CDs,

    Hi my MacBook is freezing whenever I try to open an application. I have tried resetting the system management controller, however no success. How can I wipe my hardrive and reinstall it again. PS: I no longer have the installation CDs, can I download it from Apple?

    To get replacement installation disks, call Apple.  Have the serial number of your MBP ready and a credit card.  There is a fee.
    Ciao.

Maybe you are looking for