T400 Windows 7 64Bit install

I currently have windows 7 32bit installed and want to install 64bit. Laptop won't boot into install disk and just restarts into windows. Boot order is set to cd/dvd rom and I have verified with a 32bit windows 7 disk and that one will start the install but 64bit will not?
Solved!
Go to Solution.

You need to shutdown cold from a clean boot into the existing drive's OS before you'll be able to boot from the DVD.
So boot the HD all the way. Then total shutdown to the power off state. Wait and try again on powering on. If the boot order is in fact correct it will boot. If not there should be an F key such as F10 or F12 to prompt to select a different boot source and lists them.
I presume you have the current BIOS installed on that 400? As for the above Windows does not allow for some reason booting to another device if there was an crash, error in the previous attempt it always wants to go back to that drive.
T520 Model 4239 Intel(R) Core(TM) i7-2860QM CPU @ 2.50GHz
Intel Sandy Bridge & Nvidia NVS 4200M graphics Intel N 6300 Wi-Fi adapter
Windows 7 Home Prem - 64bit w/8GB DDR3

Similar Messages

  • Lenovo D20, Type 4155-21G With 5x1.5tb Raid 5, Windows 7 64bit install problem.

    H
    Id like to just document a current machine and works and see if any thing is glaringly wrong..
    Above spec machine has an onboard marrvel 66xx raid card, a raid 5 volume has been created, total useable space is around 5.5TB.
    The software in play here is the following..
    Orignal Lenovo recovery disk set, this is Rescue and recovery boot disk 1, then the OS which is Vista 32 Business, the disk label is actual 64bit but its not 64bit its 32bit.
    The machine finally has to leave with Windows 7 64bit ultimate.
    I have looked into the upgrade paths and so on and basicly you need vista 64bit ultimate in theory, certain hacks are possible such as renaming the os level or name via the registery, but this is dirverting from my post.
    Here is what has been done and what has happend.
    20th Jan.
    Start of day.
    Raid 5 volume created.
    Factory recovery completed windows vista business 32bit.
    Attempt to upgrade Windows vista business to Windows 7 ultimate from with in windows, windows 7 alerts this is not a compatable system etc.
    At this stage since the 64bit upgrade is not possible from the known good lenovo state (lenovo vista business factory desktop etc) the second disks in the "Windows 7 32bit + 64bit any time upgrade package was ran.
    The 32bit version of the Windows 7 ultimate was ran, this did complete sucessfully.
    The 64bit version of the windows 7 was attempted once more from with in the newly installed Windows 7 32 bit but again this upgrade route is not supported.
    At this stage a custom install was completed (which means a fresh install which wipes the drive) / fresh install, of the windows 7 64bit any time upgrade disk.
    For some reason the Windows 7 64bit any time upgrade key failed to be accepted.
    At this stage a second engineer repeated all steps completed to verify and on the second go around the FRESH install of Windows 64bit any time upgrade (stand alone install / custom etc) the key worked!..
    This is were it gets interesting.
    Lets recap, we have a D20 with 5x1.5tb sata hard drives in raid 5, all on the onboard marvel raid card.
    Windows 7 64bit has been sucessfully installed, and of course the next step is to install the lenovo system update tool. (version for windows 7, I understand this is fully 64bit compatable..)
    This was completed and pc doctor and one other misc application install, the system requested to restart and then ....
    The raid BIOS of the marvel card reported that the raid had become degraded..!!
    An inspection of the onboard raid information results that the disk 0 of the 5 disks, was no longer assigned to the RAID 5, with teh remaining several disks still "assigned".
    At this stage the only option is to delete the raid five array and recreate it.
    This has been done and the factory recovery process has once again been restarted and an attempt will be made to perform the custom install with hopefully the windows 7 64bit any time upgrade install detecting the previous version although I would say that it would not need to detect anything since this is now longer an upgrade but a custom fresh install.
    Further information.
    There is a System bios update from the 5th of Jan 2010, this has been burnt to cd and will be applyed against the machine shortly.
    We have had some conversation about just how it is that a disk can fatally pop out from the raid five volume like this, was it a coincidence that it coninsided with the power cycle process dirrectly after the system update installation?
    Tommorow a Windows 64bit OEM package will be applied against this machine and since we have the relivant driver file for the onboard raid card (sourced from the drivers and applications lenovo recovery disk set), there should be less of a problem in key acceptance.
    Kind of a werid situation, what looks like a possible hardware problem and a stupid microsoft upgrade qulification problem.
    Is there any thing stupid I have over looked?
    Thanks, sorry for the long post but this is the story in full.
    Note from Moderator:  Fixed formatting issue.

    21st Jan..
    The D20 has sucessfully had vista business factory reinstalled and then Windows 7 64bit installed.
    Dirrectly after the Windows 7 installation and power cycle, one of the five 1.5tb hard drives have dropped out of the raid, visable as "DEGRADED", uppon further inspection via control m, the middle drive (not drive 0 as before) drive 2 (0,1,2,3,4,5) has dropped out and is not marked as assigned, it is marked with no label or free.
    This is high strangeness, it is my understanding that the RAID technologies are transparent to the OS so it should not be in any way the Windows 7 install triggering this, the last occurance was also during a Windows 7 power cycle but dirrectly after the system update tool being installed.
    At this stage it would appear that Windows 7 64-bit used in conjunction with the supplment driver disk marked as (drivers and apps, windows xp vista, windows 7) is not able to complete and remain stable.
    I suspect a possible driver issue but if this was the case surely the windows 7 install would not progress past the first installation point where the driver disks is required to actually use and see the array via the controler.
    I will update this thread with more information as it becomes available.
    Machine delivery eta to customer is tommorow so this is not good.

  • Windows 7 64bits Installing Internet Explorer 11 ERROR Neutral package installation failed

    Hi,
    The laptop is running Windows 7 64bits with Internet Explorer 10 and the Windows automatic updates is turned on. The problem happens when the Windows keeps installing the Internet Explorer 11 every time between shutdown process. So I decided to download
    IE11 offline installation and try to install from it but the problem doesn't solve, the installation still does not complete. I have tried to delete all files in the Windows temp folder and IE temp folder already but the problem still exist.
    Below is the details from IE11_main.log file
    00:00.000:
    ====================================================================
    00:00.000: Started: 2014/05/26 (Y/M/D) 11:00:44.473 (local)
    00:00.000: Time Format in this log: MM:ss.mmm (minutes:seconds.milliseconds)
    00:00.016: Command line: "C:\Users\TBG\Desktop\IE11-Windows6.1-x64-en-us.exe"
    00:00.016: INFO:    Setup installer for Internet Explorer: 11.0.9600.16428
    00:00.016: INFO:    Previous version of Internet Explorer: 10.0.9200.16866
    00:00.016: INFO:    Checking if iexplore.exe's current version is between 11.0.9600.0...
    00:00.016: INFO:    ...and 11.1.0.0...
    00:00.016: INFO:    Maximum version on which to run IEAK branding is: 11.1.0.0...
    00:00.016: INFO:    iexplore.exe version check success. Install can proceed.
    00:00.016: INFO:    Operating System: Windows Workstation: 6.1.7601 (Service Pack 1)
    00:00.016: INFO:    Trying to extract ID: SetupDownloadList.txt (0) as "SetupDownloadList.txt"
    00:00.016: INFO:    Trying to extract ID: HardwareBlockingList.xml (0) as "HardwareBlockingList.xml"
    00:00.016: INFO:    Trying to extract ID: 7006 (0) as "IE11-neutral.Extracted.cab"
    00:00.702: INFO:    Trying to extract ID: 5501 (1033) as "Spelling_en.msu"
    00:00.702: INFO:    Extracted Spelling dictionary for en to C:\Windows\TEMP\IE18CE4.tmp\Spelling_en.msu.
    00:00.702: INFO:    Trying to extract ID: 5502 (1033) as "Hyphenation_en.msu"
    00:00.702: INFO:    Extracted Hyphenation dictionary for en to
    C:\Windows\TEMP\IE18CE4.tmp\Hyphenation_en.msu.
    00:00.718: INFO:    Trying to extract ID: 7128 (1033) as "IE11-support.cab"
    00:01.607: INFO:    PauseOrResumeAUThread: Successfully paused Automatic Updates.
    00:02.714: INFO:    Updated Download list, Hardware Blocking list, and no reboot policy files successfully downloaded
    and extracted for use.
    00:02.730: INFO:    Launched program to check hardware: "C:\Windows\TEMP\IE18CE4.tmp\IE11-
    SUPPORT\IEXPLORE.EXE" /CheckHardware "C:\Windows\TEMP\IE18CE4.tmp\IE11-support\HardwareBlockingList.xml"
    00:02.870: INFO:    Graphics Device Information: Intel(R) HD Graphics Family
    00:02.870: INFO:    Hardware support check succeeded. Installation will continue.
    00:02.870: INFO:    Windows 7 operating system detected.
    00:02.886: INFO:    Service pack major: 1
    00:02.886: INFO:    Service pack minor: 0
    00:02.886: INFO:    Service pack name:  Service Pack 1
    00:02.886: INFO:    Version Check for (KB2834140) of C:\Windows\System32\d3d11.dll: 6.2.9200.16570 >=
    6.2.9200.16570 (True)
    00:02.886: INFO:    Version Check for (KB2670838) of C:\Windows\System32\api-ms-win-downlevel-user32-l1-1-0.dll:
    6.2.9200.16492 >= 6.2.9200.16426 (True)
    00:02.886: INFO:    Version Check for (KB2639308) of C:\Windows\System32\Ntoskrnl.exe: 6.1.7601.18409 >=
    6.1.7601.17727 (True)
    00:02.902: INFO:    Version Check for (KB2533623) of C:\Windows\System32\api-ms-win-security-base-l1-1-0.dll:
    6.1.7601.18229 >= 6.1.7601.17617 (True)
    00:02.902: INFO:    Version Check for (KB2731771) of C:\Windows\System32\conhost.exe: 6.1.7601.18229 >=
    6.1.7601.17888 (True)
    00:02.902: INFO:    Checking for correct version of C:\Windows\Fonts\segoeui.ttf.
    00:02.902: INFO:    Version Check for (KB2786081) of C:\Windows\System32\taskhost.exe: 6.1.7601.18010 >=
    6.1.7601.18010 (True)
    00:02.902: INFO:    Version Check for (KB2888049) of C:\Windows\System32\drivers\tcpip.sys: 6.1.7601.18254 >=
    6.1.7601.18254 (True)
    00:02.917: INFO:    Version Check for (KB2882822) of C:\Windows\System32\tdh.dll: 6.1.7601.18247 >=
    6.1.7601.18247 (True)
    00:07.597: INFO:    Waiting for 0 prerequisite downloads.
    01:37.423: INFO:    The neutral pack was successfully downloaded from the internet. Installation will continue using
    the downloaded package.
    01:37.423: INFO:    Waiting for 0 language pack downloads.
    01:37.423: INFO:    Language pack downloads completed. (exit code = 0xffffffff (4294967295)).
    01:37.438: INFO:    No reboot logic message NrApiStart(0), lParam=0x03771068 returned 0x00000000.
    01:38.000: INFO:    No reboot logic message NrApiScan(1), lParam=0x00000001 returned 0x00000000.
    01:38.000: INFO:    No reboot logic message NrApiStartInstall(4), lParam=0x00000001 returned 0x00000014.
    01:38.000: INFO:    Installing with the downloaded package. C:\Windows\TEMP\IE18CE4.tmp\IE11-
    neutral.Downloaded.cab
    01:38.000: INFO:    Launched package installation: C:\Windows\SysNative\dism.exe /online /add-package
    /packagepath:C:\Windows\TEMP\IE18CE4.tmp\IE11-neutral.Downloaded.cab /quiet /norestart
    02:20.619: INFO:    Process exit code 0x80004005 (-2147467259) [Unspecified error ]
    02:20.713: ERROR:   Neutral package installation failed (exit code = 0x80004005 (2147500037)).
    02:20.729: INFO:    No reboot logic message NrApiInstallDone(7), lParam=0x00009c59 returned 0x00000000.
    02:20.744: INFO:    No reboot logic message NrApiStartFinish(11), lParam=0x00000000 returned 0x00000000.
    02:20.775: INFO:    No reboot logic message NrApiFinish(12), lParam=0x00000000 returned 0x00000016.
    02:20.869: INFO:    Waiting for Active Setup to complete.
    02:20.963: INFO:    PauseOrResumeAUThread: Successfully resumed Automatic Updates.
    02:32.694: INFO:    Setup exit code: 0x00009C59 (40025) - The neutral cab failed to install.
    02:32.741: INFO:    Scheduling upload to IE SQM server: http://sqm.microsoft.com/sqm/ie/sqmserver.dll
    02:32.756: INFO:    SQM Upload returned 403
    02:36.453: INFO:    Cleaning up temporary files in: C:\Windows\TEMP\IE18CE4.tmp
    02:36.531: INFO:    Unable to remove directory C:\Windows\TEMP\IE18CE4.tmp, marking for deletion on reboot.
    02:36.531: INFO:    Released Internet Explorer Installer Mutex
    Taweesak Archawamaitreekool

    DISM.log would make this clearer.  And using ProcMon I suspect would really make it snap out at you.   <eg>
    C.f. (credit for a recent discovery)
    http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_update/i-get-error-9c59-when-updating-internet-explorer/03d4473a-867b-44a5-9a37-913e9a5879cf?page=8&msgId=afe85da0-36e0-4160-860b-d2973e78c8b9 
    Unfortunately, since then others have quickly stuck a pin in this balloon, finding that it is just one more bump in the road, but at least working around this coding error should change your symptom.
    Good luck
    Robert Aldwinckle
    Thank you very much.
    I have tried to create a symbolic link as suggested on a forum but the problem still cannot be solved. The error message from IE11_main.log file is exactly the same as before.
    For DISM.Log, here are the details from the started time of the installtion process
    2014-05-29 16:53:55, Info                  DISM   DISM.EXE: <----- Starting Dism.exe session ----->
    2014-05-29 16:53:55, Info                  DISM   DISM.EXE:
    2014-05-29 16:53:55, Info                  DISM   DISM.EXE: Host machine information: OS Version=6.1.7601, Running architecture=amd64, Number of processors=4
    2014-05-29 16:53:55, Info                  DISM   DISM.EXE: Executing command line: C:\Windows\SysNative\dism.exe /online /add-package /packagepath:C:\Windows\TEMP\IE1CA88.tmp\IE11-neutral.Downloaded.cab
    /quiet /norestart
    2014-05-29 16:53:55, Info                  DISM   DISM Provider Store: PID=9144 Getting Provider FolderManager - CDISMProviderStore::GetProvider
    2014-05-29 16:53:55, Info                  DISM   DISM Provider Store: PID=9144 Provider has not previously been encountered.  Attempting to initialize the provider.
    - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:55, Info                  DISM   DISM Provider Store: PID=9144 Loading Provider from location C:\Windows\System32\Dism\FolderProvider.dll - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:55, Info                  DISM   DISM Provider Store: PID=9144 Connecting to the provider located at C:\Windows\System32\Dism\FolderProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2014-05-29 16:53:55, Info                  DISM   DISM Provider Store: PID=9144 Getting Provider FolderManager - CDISMProviderStore::GetProvider
    2014-05-29 16:53:55, Info                  DISM   DISM Provider Store: PID=9144 Provider has previously been initialized.  Returning the existing instance. -
    CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:58, Info                  DISM   DISM Manager: PID=9144 Successfully loaded the ImageSession at "C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583"
    - CDISMManager::LoadImageSession
    2014-05-29 16:53:58, Info                  DISM   DISM Image Session: PID=8324 Instantiating the Provider Store. - CDISMImageSession::get_ProviderStore
    2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Initializing a provider store for the IMAGE session type. - CDISMProviderStore::Final_OnConnect
    2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Provider has not previously been encountered.  Attempting to initialize the provider.
    - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\OSProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\OSProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2014-05-29 16:53:58, Info                  DISM   DISM OS Provider: PID=8324 Defaulting SystemPath to C:\ - CDISMOSServiceManager::Final_OnConnect
    2014-05-29 16:53:58, Info                  DISM   DISM OS Provider: PID=8324 Defaulting Windows folder to C:\Windows - CDISMOSServiceManager::Final_OnConnect
    2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Attempting to initialize the logger from the Image Session. - CDISMProviderStore::Final_OnConnect
    2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Provider has not previously been encountered.  Attempting to initialize the provider.
    - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\LogProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\LogProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Getting Provider OSServices - CDISMProviderStore::GetProvider
    2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Provider has previously been initialized.  Returning the existing instance. -
    CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Found and Initialized the DISM Logger. - CDISMProviderStore::Internal_InitializeLogger
    2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Provider has not previously been encountered.  Attempting to initialize the provider.
    - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\PEProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:58, Warning               DISM   DISM Provider Store: PID=8324 Failed to Load the provider: C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\PEProvider.dll.
    - CDISMProviderStore::Internal_GetProvider(hr:0x8007007e)
    2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Failed to get and initialize the PE Provider.  Continuing by assuming that it
    is not a WinPE image. - CDISMProviderStore::Final_OnConnect
    2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Finished initializing the Provider Map. - CDISMProviderStore::Final_OnConnect
    2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
    2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Provider has previously been initialized.  Returning the existing instance. -
    CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:58, Info                  DISM   DISM Manager: PID=9144 Image session successfully loaded from the temporary location: C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583
    - CDISMManager::CreateImageSession
    2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Getting Provider OSServices - CDISMProviderStore::GetProvider
    2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Provider has previously been initialized.  Returning the existing instance. -
    CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:58, Info                  CSI    00000001 Shim considered [l:256{128}]"\??\C:\Windows\Servicing\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
    : got STATUS_OBJECT_PATH_NOT_FOUND
    2014-05-29 16:53:58, Info                  CSI    00000002 Shim considered [l:250{125}]"\??\C:\Windows\WinSxS\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
    : got STATUS_SUCCESS
    2014-05-29 16:53:58, Info                  DISM   DISM.EXE: Target image information: OS Version=6.1.7601.17592, Image architecture=amd64
    2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Getting the collection of providers from an image provider store type. - CDISMProviderStore::GetProviderCollection
    2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Provider has not previously been encountered.  Attempting to initialize the provider.
    - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\CbsProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\CbsProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2014-05-29 16:53:58, Info                  DISM   DISM Provider Store: PID=8324 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2014-05-29 16:53:58, Info                  CSI    00000001 Shim considered [l:256{128}]"\??\C:\Windows\Servicing\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
    : got STATUS_OBJECT_PATH_NOT_FOUND
    2014-05-29 16:53:58, Info                  CSI    00000002 Shim considered [l:250{125}]"\??\C:\Windows\WinSxS\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
    : got STATUS_SUCCESS
    2014-05-29 16:53:59, Info                  DISM   DISM Package Manager: PID=8324 Finished initializing the CbsConUI Handler. - CCbsConUIHandler::Initialize
    2014-05-29 16:53:59, Info                  CSI    00000001 Shim considered [l:256{128}]"\??\C:\Windows\Servicing\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
    : got STATUS_OBJECT_PATH_NOT_FOUND
    2014-05-29 16:53:59, Info                  CSI    00000002 Shim considered [l:250{125}]"\??\C:\Windows\WinSxS\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
    : got STATUS_SUCCESS
    2014-05-29 16:53:59, Info                  DISM   DISM Package Manager: PID=8324 CBS is being initialized for online use. More information about CBS actions can be
    located at: %windir%\logs\cbs\cbs.log - CDISMPackageManager::Initialize
    2014-05-29 16:53:59, Info                  DISM   DISM Package Manager: PID=8324 Loaded servicing stack for online use only. - CDISMPackageManager::RefreshInstanceAndLock
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Provider has not previously been encountered.  Attempting to initialize the provider.
    - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\MsiProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\MsiProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Provider has not previously been encountered.  Attempting to initialize the provider.
    - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\IntlProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\IntlProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Provider has not previously been encountered.  Attempting to initialize the provider.
    - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\DmiProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\DmiProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2014-05-29 16:53:59, Info                  CSI    00000001 Shim considered [l:256{128}]"\??\C:\Windows\Servicing\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
    : got STATUS_OBJECT_PATH_NOT_FOUND
    2014-05-29 16:53:59, Info                  CSI    00000002 Shim considered [l:250{125}]"\??\C:\Windows\WinSxS\amd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_672ce6c3de2cb17f\pkgmgr.exe"
    : got STATUS_SUCCESS
    2014-05-29 16:53:59, Info                  DISM   DISM OS Provider: PID=8324 Successfully loaded the hive. - CDISMOSServiceManager::DetermineBootDrive
    2014-05-29 16:53:59, Info                  DISM   DISM Driver Manager: PID=8324 Further logs for driver related operations can be found in the target operating system
    at %WINDIR%\inf\setupapi.offline.log - CDriverManager::Initialize
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Provider has not previously been encountered.  Attempting to initialize the provider.
    - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\UnattendProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\UnattendProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Provider has not previously been encountered.  Attempting to initialize the provider.
    - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\SmiProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\SmiProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Provider has not previously been encountered.  Attempting to initialize the provider.
    - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Loading Provider from location C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\TransmogProvider.dll
    - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Connecting to the provider located at C:\Users\TBG\AppData\Local\Temp\A444213B-3012-4ACB-9A8C-561F175FD583\TransmogProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Encountered a servicing provider, performing additional servicing initializations.
    - CDISMProviderStore::Internal_LoadProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Getting Provider DISM Package Manager - CDISMProviderStore::GetProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Provider has previously been initialized.  Returning the existing instance. -
    CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Getting Provider DISM Unattend Manager - CDISMProviderStore::GetProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Provider has previously been initialized.  Returning the existing instance. -
    CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Got the collection of providers. Now enumerating them to build the command table.
    2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DISM Package Manager
    2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: DISM Package Manager.
    2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: OSServices
    2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: MsiManager
    2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: MsiManager.
    2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: IntlManager
    2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: IntlManager.
    2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DriverManager
    2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: DriverManager.
    2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DISM Unattend Manager
    2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: DISM Unattend Manager.
    2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DISM Log Provider
    2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: SmiManager
    2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: Edition Manager
    2014-05-29 16:53:59, Info                  DISM   DISM Transmog Provider: PID=8324 Current image session is [ONLINE] - CTransmogManager::GetMode
    2014-05-29 16:53:59, Info                  DISM   DISM.EXE: Succesfully registered commands for the provider: Edition Manager.
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Getting Provider DISM Package Manager - CDISMProviderStore::GetProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Provider Store: PID=8324 Provider has previously been initialized.  Returning the existing instance. -
    CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:53:59, Info                  DISM   DISM Package Manager: PID=8324 Processing the top level command token(add-package). - CPackageManagerCLIHandler::Private_ValidateCmdLine
    2014-05-29 16:53:59, Info                  DISM   DISM Package Manager: PID=8324 Attempting to route to appropriate command handler. - CPackageManagerCLIHandler::ExecuteCmdLine
    2014-05-29 16:53:59, Info                  DISM   DISM Package Manager: PID=8324 Routing the command... - CPackageManagerCLIHandler::ExecuteCmdLine
    2014-05-29 16:53:59, Info                  DISM   DISM Package Manager: PID=8324 Encountered the option "packagepath" with value "C:\Windows\TEMP\IE1CA88.tmp\IE11-neutral.Downloaded.cab"
    - CPackageManagerCLIHandler::Private_GetPackagesFromCommandLine
    2014-05-29 16:53:59, Info                  DISM   DISM Package Manager: PID=8324 Package Microsoft-Windows-InternetExplorer-Package-TopLevel~31bf3856ad364e35~amd64~~11.2.9600.16428
    with CBS state 4(CbsInstallStateStaged) being mapped to dism state 3(DISM_INSTALL_STATE_STAGED) - CDISMPackage::LogInstallStateMapping
    2014-05-29 16:53:59, Info                  DISM   DISM Package Manager: PID=8324 Initiating Changes on Package with values: 4, 7 - CDISMPackage::Internal_ChangePackageState
    2014-05-29 16:54:00, Info                  DISM   PID=4640 Scratch directory set to 'C:\Users\TBG\AppData\Local\Temp\'. - CDISMManager::put_ScratchDir
    2014-05-29 16:54:00, Info                  DISM   PID=4640 Successfully loaded the ImageSession at "C:\Windows\System32\Dism" - CDISMManager::LoadImageSession
    2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Found and Initialized the DISM Logger. - CDISMProviderStore::Internal_InitializeLogger
    2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Failed to get and initialize the PE Provider.  Continuing by assuming that it
    is not a WinPE image. - CDISMProviderStore::Final_OnConnect
    2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Finished initializing the Provider Map. - CDISMProviderStore::Final_OnConnect
    2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
    2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Provider has previously been initialized.  Returning the existing instance. -
    CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
    2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Provider has previously been initialized.  Returning the existing instance. -
    CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:54:00, Info                  DISM   DISM Manager: PID=4640 Successfully created the local image session and provider store. - CDISMManager::CreateLocalImageSession
    2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
    2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Provider has previously been initialized.  Returning the existing instance. -
    CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:54:00, Info                  DISM   DISM.EXE:
    2014-05-29 16:54:00, Info                  DISM   DISM.EXE: <----- Starting Dism.exe session ----->
    2014-05-29 16:54:00, Info                  DISM   DISM.EXE:
    2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Host machine information: OS Version=6.1.7601, Running architecture=amd64, Number of processors=4
    2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Executing command line: c:\windows\sysnative\dism.exe
    2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Getting the collection of providers from a local provider store type. - CDISMProviderStore::GetProviderCollection
    2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Provider has not previously been encountered.  Attempting to initialize the provider.
    - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Loading Provider from location C:\Windows\System32\Dism\WimProvider.dll - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Connecting to the provider located at C:\Windows\System32\Dism\WimProvider.dll. -
    CDISMProviderStore::Internal_LoadProvider
    2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Provider has not previously been encountered.  Attempting to initialize the provider.
    - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Loading Provider from location C:\Windows\System32\Dism\FolderProvider.dll - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Connecting to the provider located at C:\Windows\System32\Dism\FolderProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Provider has not previously been encountered.  Attempting to initialize the provider.
    - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Loading Provider from location C:\Windows\System32\Dism\CompatProvider.dll - CDISMProviderStore::Internal_GetProvider
    2014-05-29 16:54:00, Info                  DISM   DISM Provider Store: PID=4640 Connecting to the provider located at C:\Windows\System32\Dism\CompatProvider.dll.
    - CDISMProviderStore::Internal_LoadProvider
    2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Got the collection of providers. Now enumerating them to build the command table.
    2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: WimManager
    2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Getting the help information collection for the provider: WimManager.
    2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Registering information from the help collection from provider: WimManager.
    2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Succesfully registered the Help Item with topic(wimcommands) and category(localtoplevelhelp) for the provider(WimManager).
    2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Succesfully registered the Help Item with topic(cleanup-wim) and category(wimcommands) for the provider(WimManager).
    2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Succesfully registered the Help Item with topic(remount-wim) and category(wimcommands) for the provider(WimManager).
    2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Succesfully registered the Help Item with topic(mount-wim) and category(wimcommands) for the provider(WimManager).
    2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Succesfully registered the Help Item with topic(unmount-wim) and category(wimcommands) for the provider(WimManager).
    2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Succesfully registered the Help Item with topic(commit-wim) and category(wimcommands) for the provider(WimManager).
    2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Succesfully registered the Help Item with topic(get-wiminfo) and category(wimcommands) for the provider(WimManager).
    2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Succesfully registered the Help Item with topic(get-mountedwiminfo) and category(wimcommands) for the
    provider(WimManager).
    2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: FolderManager
    2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: DISM Log Provider
    2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Attempting to add the commands from provider: Compatibility Manager
    2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Getting the help information collection for the provider: Compatibility Manager.
    2014-05-29 16:54:00, Info                  DISM   DISM.EXE: Image session has been closed. Reboot required=no.
    2014-05-29 16:54:00, Info                  DISM   DISM.EXE:
    2014-05-29 16:54:00, Info                  DISM   DISM.EXE: <----- Ending Dism.exe session ----->
    Taweesak Archawamaitreekool

  • Will Windows 7 64Bit Install on Macbook?

    I have been trying to educate myself on whether or not Windows 7 will install onto my Macbook 4,1. Have seen a lot written about MBP's, but little on just MacBooks. I currently run Vista and XP on my machine in 32 bit through BootCamp and Parrallels, but am hoping to get rid of Vista and replace it with 64bit Win 7. Just wondering if it can be done, or if I have to go get the 32 bit version to do this.

    Hi,
    I am running Windows 7 ultimate 64-bit on MacBook unibody and upto now I managed to get everything up an running.
    Windows 7 install fairly easily and runs OOB using BootCamp (dual boot). Then install the BootCamp drivers 64-bit version. Remember to run it as Adminstrator mode.
    Even better install the latest bootcamp v3 drivers from the snow leopard dvd. You will have all fn keys, on screen displays etc. Also some people say that you cannot have a native right click on MacBook with Windows, but I can assure you that the bootcamp v3 drivers add a native right click to windows via the bootcamp control panel.
    I was also pleasantly surprised to see that I could even access the mac os file system via Windows!
    I can say that Windows 7 really rocks on MacBook with 4GB of accessible RAM.
    Hope that this helps.

  • T400 Windows 7 64bit - Multiple ThinkVanta​ge Issues

    Hi there, I've been searching for solutions on this and other forums dedicated to ThinkPads - but I'm at a loss on two pains.
    ThinkPad T400 2764-CTO (2.53Ghz, 4GB Ram, 200GB Encrypted 7.2k RPM SATA, 14" LED backlit, 802.11abg, fingerprint scanner).
    I'm running Windows 7 Professional, 64bit Volume Licensed installation, directly from Microsoft.
    1. Fingerprint scanner refuses to work with the ThinkVantage software. If I allow windows to install the Windows Update recommended drivers and software - it works fine. I've done clean installations of Win7 without WU running and then installed the latest FPR driver/app from Lenovo.com - still fails.
    The errors I get are "Cannot communicate with sensor. Please confirm sensor is ready." It's not able to tell me how many slots are free nor is it able to erase any of the existing fingerprints. I've also erased the stored fingerprints in the BIOS.
    When I reboot, all I get is "Please wait..." The only way to login is to choose my username.
    2. Rescue and Recovery 4.3 will not install. I continue to get Error 25014. There was an error installing the Rescue and Recovery boot manager. Return code: 6
    Again, I've done a full clean installation and followed the recommendations in the installation instructions to the letter.
    On both these issues I've done full clean installations with Windows 7 trying to find a solution that works. I was hoping to be able to post a fix, but now I've come looking for assistance. My next stop is to call support and hope someone has another option.
    T400 - 2.53Ghz CoreDuo - 4GB Ram - 200GB 7.2kRPM Encrypted HDD - LED Backlit Screen, Web Cam.

    Hi,
    1. Do I understand it correctly, that when you upgrade the Wind updates, then it wirks fine? Please note, that for the correct work of FPR it's needed to have certain Win updates installed. Howerver, in case you mean, that if you just enable the Windows updates adn don't install any update and it works, then that is weird. More details would be appreciated.
    Try also to runn following file:
    %windir%\system32\ATupdatePBA.exe
    This will re-synchronize the FPR sensor.
    2. This error means, that RnR could not loacte and/ro change the Boot manager of the system, so that you will have the boot option to start into the RnR PDA (PreDesktor Area).
    In this situation you have there the option to dissable the Windows UAC, or to install RnR without the PDA option.
    Let me know, if this situation change if you dissable the UAC, or if you want to install RnR without the boot option. I can provide more info on this.
    I'm not sure, if a regular support will help you out with this one. However, might also work.
    Cheers

  • T400 Windows 7 64bit Can't Find Printer Driver

    Hi all,
    Perhaps someone can  help with this puzzling problem. Just bought the T400 w/Win 7 64 bit from the Lenovo website. It is great except one thing.
    I have a Win2k T22 ThinkPad on the network with a parallel port HP laserjet 6L and a USB port HP DeskJet 970cxi. When I go to add a printer on the T400, Win7 searches the network and finds the printers. For the 6L it downloaded a driver and it works fine. For the 970cxi it tries to find a driver from MS website but can not find a driver.
    When I connect the970cxi printer directly to a USB port on the Win7 T400 it finds a driver and it works fine. But not over the network? Even after it found a driver when it was connected locally?
    On the network is a Debian Linux computer that can print to both printers. I turned on printer sharing on it. The T400 can find the printers on the Linux box and can print to both the 6L and 970cxi.
    I loaded VirtualBox on the T400 and then install Ubuntu Linux. The Ubunu Linux can find the printers and can print to both.
    Does anyone know what the heck is going on here? Why can't the T400 find a driver for the 970cxi printer but when it's connected directly it finds the printer driver and works?
    Is this a Win7 64 bit issue?
    No driver available?
    Communication problem w/printer?
    Buy a new printer and throw out a perfectly good printer?
    Thanks,
    Rich
    Solved!
    Go to Solution.

    I did as you suggested but now get a different error: 0x00000214
    I googled this and found others with the same problem. Tried the solution and it worked!
    Here's the link:
    Network Printer Problem Link
    In case the link gets broken I cut and pasted it here:
    1. Click Start, click Control Panel and double click Devices and Printers.
    2. Click Add a Printer.
    3. Select "Add a local printer".
    4. Select "Create a new port". Choose "Local Port" as the type of the port.
    5. In the box "Enter a port name", type the address as the following format.
    \\Network address of the host computer\[The Share Name of the printer
    Then click Next.
    6. Choose the correct driver in the driver list. If no available driver, click the button Windows Update, wait for the process finishes and then look for the driver again.
    7. Finish the installation.
    Thanks! Your suggection got me to an error I could identify. And a solution. I hope others find this helpful.
    Rich

  • Windows 7 64bit install error code 2605

    Tried repeatedly to install itunes 10.7 on a Windows & 64 bit PC without any success. During install, I get a repeated message saying that the PC is running in safe mode or displays error code 2605. Any help would be great!

    Tried repeatedly to install itunes 10.7 on a Windows & 64 bit PC without any success. During install, I get a repeated message saying that the PC is running in safe mode or displays error code 2605. Any help would be great!

  • Windows 7 64bit Install error microsoft.vc80.CRT,type="win32",version="8.0.50727.4053",publicKeyToken="1fc8b3 b9a1e8e3b",processorArchitecture="amd64"

    How do i fix this install error.  Very fustrating. 

    Not sure if this is the ideal solution but worked just fine. I simply reinstalled Windows 7 using pre-delivered Microsoft functionality. Upon sucessful reinstall Itunes latset version worked just fine. It is a shame Apple supoort could not have recommended this solution in teh first intance.

  • X120e ---- Best way to do a FRESH windows 7 64bit install?

    Hello I will be doing a fresh install of windows after completely wiping the hard drive. Could sime kind soul please help me out here. I only have a windows 7 Ultimate 64 bit disc.
    I'm hearing people are having all sorts of problems with drivers and what not. Is there a step by step guide available?
    Thanks
    p.s its the X120e. 
    Solved!
    Go to Solution.

    It looks like for the Windows 7 USB/DVD Download Tool to work, you have to have an ISO of the Win7 DVD. If you have the retail DVD, you would also need to download a program that will create an ISO image of the DVD. Another way to accomplish the same goal is to prepare the thumb drive with diskpart.exe (included with Windows) and copy the contents of the DVD to the thumb drive (which should be at least 4GB).
    Here's a Microsoft TechNet article with instructions: http://technet.microsoft.com/en-us/magazine/dd535816.aspx

  • Fix for Windows 7 64bit Install Trouble

    This is regarding the failure of iTunes 10.5 to install.  Windows gives message stating Package is Missing some components, or something like that.  I found that my Apple Updater product was not installed, only downloaded.  I installed the Updater (by looking under Programs, All Programs, Apple Product Updater, and installed it.  It then immediately went out, found iTunes 10.5 and Im good to go.

    See
    http://forums.adobe.com/thread/885448
    http://forums.adobe.com/thread/867968

  • IDES ECC6.0 SR3  For SQL ON Windows 2008 64bit Install Error

    Hi, All:
    When I'm  installing sap ECC6.0  ides iam getting the following error
       INFO 2008-12-11 15:13:19.069
    Creating file C:\Program Files\sapinst_instdir\ERP\SYSTEM\MSS\CENTRAL\AS\x.
    INFO 2008-12-11 15:13:19.069
    Removing file C:\Program Files\sapinst_instdir\ERP\SYSTEM\MSS\CENTRAL\AS\x.
    INFO 2008-12-11 15:13:22.281
    Creating directory C:\Program Files\sapinst_instdir\ERP\SYSTEM\MSS\CENTRAL\AS\log_11_Dec_2008_15_13_22.
    INFO 2008-12-11 15:13:22.361
    Copied file 'E:/IDES ECC6.0 SR3/D51034992_IDES_Install_Master/IM_WINDOWS_X86_64/NW04S/WEBAS/IND/control.xml' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS'.
    INFO 2008-12-11 15:13:22.364
    Copied file 'E:/IDES ECC6.0 SR3/D51034992_IDES_Install_Master/IM_WINDOWS_X86_64/NW04S/WEBAS/IND/dialog.xml' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS'.
    INFO 2008-12-11 15:13:22.367
    Copied file 'E:/IDES ECC6.0 SR3/D51034992_IDES_Install_Master/IM_WINDOWS_X86_64/NW04S/WEBAS/IND/keydb.xml' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS'.
    INFO 2008-12-11 15:13:22.369
    Copied file 'E:/IDES ECC6.0 SR3/D51034992_IDES_Install_Master/IM_WINDOWS_X86_64/NW04S/WEBAS/IND/messages.xml' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS'.
    INFO 2008-12-11 15:13:22.371
    Copied file 'E:/IDES ECC6.0 SR3/D51034992_IDES_Install_Master/IM_WINDOWS_X86_64/NW04S/WEBAS/IND/toplevel.xml' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS'.
    INFO 2008-12-11 15:13:22.376
    Copied file 'E:/IDES ECC6.0 SR3/D51034992_IDES_Install_Master/IM_WINDOWS_X86_64/NW04S/WEBAS/IND/control.dtd' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS'.
    INFO 2008-12-11 15:13:22.378
    Copied file 'E:/IDES ECC6.0 SR3/D51034992_IDES_Install_Master/IM_WINDOWS_X86_64/NW04S/WEBAS/IND/doc.dtd' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS'.
    INFO 2008-12-11 15:13:22.380
    Copied file 'E:/IDES ECC6.0 SR3/D51034992_IDES_Install_Master/IM_WINDOWS_X86_64/NW04S/WEBAS/IND/keydb.dtd' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS'.
    INFO 2008-12-11 15:13:22.381
    Copied file 'E:/IDES ECC6.0 SR3/D51034992_IDES_Install_Master/IM_WINDOWS_X86_64/NW04S/WEBAS/IND/messages.dtd' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS'.
    INFO 2008-12-11 15:13:22.383
    Copied file 'E:/IDES ECC6.0 SR3/D51034992_IDES_Install_Master/IM_WINDOWS_X86_64/NW04S/WEBAS/IND/packages.dtd' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS'.
    INFO 2008-12-11 15:13:22.385
    Copied file 'E:/IDES ECC6.0 SR3/D51034992_IDES_Install_Master/IM_WINDOWS_X86_64/NW04S/WEBAS/IND/resources.dtd' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS'.
    INFO 2008-12-11 15:13:22.387
    Copied file 'E:/IDES ECC6.0 SR3/D51034992_IDES_Install_Master/IM_WINDOWS_X86_64/NW04S/WEBAS/IND/sapinstgui.dtd' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS'.
    INFO 2008-12-11 15:13:22.393
    Copied file 'E:/IDES ECC6.0 SR3/D51034992_IDES_Install_Master/IM_WINDOWS_X86_64/ERP05/WEBAS/MSS/PD/exportcds.xml' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS'.
    INFO 2008-12-11 15:13:22.395
    Copied file 'E:/IDES ECC6.0 SR3/D51034992_IDES_Install_Master/IM_WINDOWS_X86_64/ERP05/WEBAS/MSS/PD/jexclude.xml' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS'.
    INFO 2008-12-11 15:13:22.397
    Copied file 'E:/IDES ECC6.0 SR3/D51034992_IDES_Install_Master/IM_WINDOWS_X86_64/ERP05/WEBAS/MSS/PD/packages.xml' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS'.
    INFO 2008-12-11 15:13:22.398
    Copied file 'E:/IDES ECC6.0 SR3/D51034992_IDES_Install_Master/IM_WINDOWS_X86_64/ERP05/WEBAS/MSS/PD/product.xml' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS'.
    INFO 2008-12-11 15:13:22.400
    Copied file 'E:/IDES ECC6.0 SR3/D51034992_IDES_Install_Master/IM_WINDOWS_X86_64/ERP05/WEBAS/MSS/PD/usages_data.xml' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS'.
    INFO 2008-12-11 15:13:22.402
    Copied file 'E:/IDES ECC6.0 SR3/D51034992_IDES_Install_Master/IM_WINDOWS_X86_64/ERP05/WEBAS/MSS/PD/usages_data2.xml' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS'.
    INFO 2008-12-11 15:13:22.405
    Copied file 'E:/IDES ECC6.0 SR3/D51034992_IDES_Install_Master/IM_WINDOWS_X86_64/catalog.dtd' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS'.
    INFO 2008-12-11 15:13:22.411
    Copied file 'E:/IDES ECC6.0 SR3/D51034992_IDES_Install_Master/IM_WINDOWS_X86_64/resourcepool.xml' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS'.
    INFO 2008-12-11 15:13:22.415
    Creating file C:\Program Files\sapinst_instdir\ERP\SYSTEM\MSS\CENTRAL\AS\start_dir.cd.
    INFO 2008-12-11 15:13:22.417
    Creating file C:\Program Files\sapinst_instdir\x.
    INFO 2008-12-11 15:13:22.417
    Removing file C:\Program Files\sapinst_instdir\x.
    INFO 2008-12-11 15:13:23.349
    Creating file C:\Program Files\sapinst_instdir\ERP\SYSTEM\MSS\CENTRAL\AS\statistic.xml.
    INFO 2008-12-11 15:13:23.352
    Copied file 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS/statistic.xml' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS/statistic.1.xml'.
    WARNING 2008-12-11 15:13:23.397
    Unable to get information about path
    LABEL.ASC\ using GetVolumeInformation. Operating system error message: 指定的路径无效。
    INFO 2008-12-11 15:13:27.979
    Creating directory C:\Program Files\sapinst_instdir\ERP\SYSTEM\MSS\CENTRAL\AS\SUPPORT_CONTAINER.
    INFO 2008-12-11 15:13:27.987
    Copied file 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS/keydb.xml' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS/keydb.1.xml'.
    INFO 2008-12-11 15:13:27.993
    Creating file C:\Program Files\sapinst_instdir\ERP\SYSTEM\MSS\CENTRAL\AS\inifile.xml.
    INFO 2008-12-11 15:13:28.004
    Copied file 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS/inifile.xml' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS/inifile.1.xml'.
    INFO 2008-12-11 15:13:28.084
    Copied file 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS/statistic.xml' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS/statistic.2.xml'.
    INFO 2008-12-11 15:13:28.84
    Execute step fillContextProduct of component |NW_Onehost|ind|ind|ind|ind|0|0
    INFO 2008-12-11 15:13:41.151
    Execute step showLicenseAgreement of component |NW_Onehost|ind|ind|ind|ind|0|0|licenseAgreement|ind|ind|ind|ind|0|0
    INFO 2008-12-11 15:13:41.181
    Execute step fillContext of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0
    INFO 2008-12-11 15:13:41.231
    Execute step readProductXML of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0|Read_Product_XML|ind|ind|ind|ind|1|0
    WARNING 2008-12-11 15:13:41.285
    The install parameter INSTPARA_DB is already defined (existing value IND, new value MSS).
    WARNING 2008-12-11 15:13:41.286
    The install parameter INSTPARA_PRODUCT is already defined (existing value NetWeaver, new value ERP).
    WARNING 2008-12-11 15:13:41.286
    The install parameter INSTPARA_PRODUCT_VERSION is already defined (existing value 04S, new value 05).
    INFO 2008-12-11 15:13:41.288
    Execute step checkRuntimeSystem of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0|Preinstall|ind|ind|ind|ind|0|0
    INFO 2008-12-11 15:13:41.336
    Execute step askStandardMode of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0|Preinstall|ind|ind|ind|ind|0|0
    INFO 2008-12-11 15:13:46.115
    Copied file 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS/product.xml' to 'C:/Program Files/sapinst_instdir/ERP/SYSTEM/MSS/CENTRAL/AS/product.1.xml'.
    INFO 2008-12-11 15:13:46.118
    Execute step syncKeydb of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0|Preinstall|ind|ind|ind|ind|0|0
    INFO 2008-12-11 15:13:46.180
    Execute step changeUserInstall of component |NW_Onehost|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0|Preinstall|ind|ind|ind|ind|0|0
    INFO 2008-12-11 15:13:46.218
    Creating file C:\Program Files\sapinst_instdir\ERP\SYSTEM\MSS\CENTRAL\AS\change.log.
    INFO 2008-12-11 15:13:46.220
    Output of change user /install is written to the logfile change.log.
    ERROR 2008-12-11 15:13:46.226
    FSL-04000  An internal error occurred: basic_pipebuf::getChar: codecvt facette::in could not convert character..
    ERROR 2008-12-11 15:13:46.226
    FSL-04000  An internal error occurred: basic_pipebuf::getChar: codecvt facette::in could not convert character..
    ERROR 2008-12-11 15:13:46.227
    MUT-03025  Caught ESyException in Modulecall: basic_pipebuf::getChar: codecvt facette::in could not convert character..
    ERROR 2008-12-11 15:13:46.229
    FCO-00011  The step changeUserInstall with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|1|0|Preinstall|ind|ind|ind|ind|0|0|changeUserInstall was executed with status ERROR ( Last error reported by the step :Caught ESyException in Modulecall: basic_pipebuf::getChar: codecvt facette::in could not convert character..).
    Can  anyone let me known where I went wrong.
    thanks.
    Anhwei Chan

    Only English versions are supported.
    You can install, however, the chinese language pack on top - but the base system must be English.
    No non-chinese speaking person will be able to help you with your problem since the error message is in Chinese.
    Markus

  • New computer, windows 7 64bit, installed 18.0 but it has never started....it keeps crashing. Help....

    I have never been able to start it on this computer, it crashes everytime. I do have crash reports but I don't know what to do with them,

    We're sorry to hear that your Firefox seems to be crashing when you open it. Please perform the following steps to give us a crash report ID that helps us find out more about the cause of the crash.
    #Press the following shortcut to get a Run window: [Windows] + [R]. This should bring up a window that contains a text field.
    #In that text field, enter %APPDATA% and press Enter. An explorer window should open.
    #From that explorer window, double-click on the ''Mozilla'' folder, then double-click on ''Firefox'' and then on ''Crash reports''. Double-click on ''submitted''.
    #Now, you should see a list of files that contain reports. Go to ''View'' > ''Arrange Icons by'' > ''Modified'' to get the most recent files at the top of the window.
    #Open the most recent 5 files with a text editor and copy the IDs.
    #Paste each ID into the reply window on the forums.
    Thanks in advance!
    You can find more information and troubleshooting steps in the [[Firefox crashes]] article.

  • Built-in Mic not working since installing windows 7 64bit

    Since windows 7 64bit installed in my lap A505-s6965, built-in microphone is not working, in control panel only have High definition audio device (twice and only one of them works fine).
    only when i conect and external mic works perfect, cant find any specific driver is ther one?
    Solved!
    Go to Solution.

    Satellite A505-S6965 (PSAP3U-01G00C)
    Try both of these drivers. They are not the same!
       Realtek Audio Driver for Windows 7 (32/64) (Version 6.0.1.5904 - Size 72,928,112 bytes - Posted 09/04/09)
       Realtek Audio Driver for Windows 7 (32/64) (Version 6.0.1.5904 - Size 72,926,808 bytes - Posted 08/03/09)
    Sometimes this helps.
       Toshiba Software Installer for Windows 7
    -Jerry

  • ISight just doesn't work on Windows 7 64Bits

    I'm a new MacBook Pro user for a few days. I was attracted by the design of MacBook and knew I could install Windows on it, so after shopping for some time, I decided to get MBP 13". I got Windows 7 64Bits installed yesterdat; all the drivers are installed as well. I went to Control Panel\System, and I saw "Built-in iSight" listed. However, the camera device just doesn't work. In Control Panel, I didn't see the "Imaging and Scanning" icon. I tried to uninstall and reinstall the driver and no luck. I'm already using the latest Boot Camp, and I just don't know what to do now. I really need the camera working. Can someone help?

    Does this help? http://discussions.apple.com/message.jspa?messageID=11953256#11953256
    EZ Jim
    Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.4)  MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.4)
    LED Cinema Display  G4 PowerBook  1.67GHz (10.4.11)  iBookSE 366MHz (10.3.9)  External iSight

  • Windows XP 64bit - No Rear So

    Hi,?let me begin by giving a short spec of System:?Motherboard: Asus Striker ExtremeCPU: Intel Quad Core 2.66GhzRAM: 4Gb Kingston Hyper X RAMVideo: 2 x Geforce 8800 Ultra's SLIAudio: Creative X-fi Elite Pro?I've done a fresh install of Windows XP 64bit, installed all drivers for motherobard, video card, and audio device. Upon testing the audio I found that only the FRONT left and FRONT right channels were working. No rear channel works, however the rear channel come from the fronts. I thought maybe my system was screwed so I installed Windows XP 32bit and installed all drivers and everything worked perfectly. Any idea's on this one? I can guess it could be creative's lack of driver support for different OS.Message Edited by counteragent77 on -30-200708:32 PM

    well i have 4 gigas of ram under xp x64
    when i have 2 gigas the sound work OK!!!!!!
    when i have 4 gigas the sound NO WORK OK!!!
    PF
    posible solutions?
    CREATIVE PLEASE UPDATE DRIVERS xp 32 and 64 bits
    allways have PROBLEMS WITH DRIVERS!!! with augiy2 zs and now with X-FIMessage Edited by SIRIKer on 2-0-200705:35 AM

Maybe you are looking for

  • Would like to know which /beta/ I have from beta channel

    About Firefox says (today) I have version 25.0, which is what it said when I had an update waiting. I then accepted the update, so I should have a version that is different than I had before, but About Firefox didn't change what it showed me. At one

  • Uploading the data from a flat file into ztable

    Hi, I have a requirement where I have to upload the data from 2 flat files into 2 z tables(ZRB_HDR,ZRB_ITM).From the 1st flat file only data for few fields have to be uploaded into ztable(ZRB_HRD) .Fromthe 2nd flat file data for all the fields have t

  • How to view multiple output parameters from web services

    I have used the Labview tool to create a .NET assembly from a WSDL file. In the WSDL file the service has been defined to return 2 output parameters. In Labview, when I invoke the method for this service the first output parameter ends up as the retu

  • Error 2096 message

    Evening, Tried to load iTunes and QuickTime and keep getting error 2096 message re Quicktime failed to initialise. Have checked compatibility issues and all appears to be ok. Also run registry clean software and still receiving the same message . Hav

  • User moved Quality inspection stock from sloc 290 to 295 via Migo_tr(311)

    Issue -User moved Quality inspection stock from storage location 290 to 295 (no Quality) via Migo_TR(311) Now they want the "Q" status to be reflected under storage location 295 ,pls help how it can be done. Background- RMA processing was correctly p