T440s - "Incorrect AC adapter is attached" error message

Hi
I have suddenly started getting an error message saying:
"Incorrect AC adapter is attached.
The AC adapter may not provide enough power to your Lenovo computer. Please reconnect proper AC adapter. To buy additional AC adapter, click here"
I am using the shipped power adapter and haven't had any problems previously. However the strange thing is that the machine charges when it is off. It is only when it is on that it won't charge so I assume this means it is a software problem rather than hardware?
Any help would be much appreciated as I would love to be able to fix this myself rather than go to Lenovo who already had the computer for 3 months befoe they could fix the last problem... 
Thanks

Hi waynelongdon
To give some more background, I purchased my computer in New Zealand and never had any problems but I subsequently moved to Chile and the problem was occurring intermittently in Chile. I took it to Lenovo Chile and they advised me that the AC Adaptor I was using was not big enough and was not certified to be used with the T440s. (This is despite it being the original AC adaptor that was shipped with the new unit). The original AC Adaptor supplied was a 45W Lenovo Adaptor model ADLX45NDC3A. Lenovo in Chile replaced it with a larger 90W Lenovo AC Adaptor model ADLX90NCC2A. This has fixed the problem.
I never quite got to he bottom of why Lenovo in Chile thought that the adaptor supplied in NZ wasn't certified to be used with the T440S. 
As the problem wasn't occurring at every outlet I plugged into in Chile I can only guess that potentially the power supply throughout Chile (or maybe it is building to building) is not completely standard and some outlets were giving out more power than others? (Both NZ & Chile use 230v mains electricity). But I have absolutely no knowledge or education in electricity so it could just as easily be something completely different.
Good luck.

Similar Messages

  • Error message when attempting to publish page with flash content in cs6

    Good day,
    I have a number of websites that I have created with content from previous versions of flash that I have installed in my html pages.  This year I have been repeatedly frustrated by the flash movies working on my computer then not working after I have uploaded them.  It came to the point where I avoided working with the flash projects but it is something I have to work out and would greatly appreciate any help I could get.
    After not working with the movies for a few months I came back and attempted to edit them again, this time receiving the attached error message which may be the resolution to my problem.  The message says I cannot stream with the current settings.  This may make sense as the movies work fine on my computer.
    Any help would be a great kindness.
    Thanks
    Brent
    http://www.missourimemorial.com
    this has the simple outdated flash file on it that I need to update
    http://www.missourimemorial.com/index2013.html
    this has the failed flash file in the page of course its not working.
    Please help - thanks 

    That alert is just to tell you that you have something in your movie's Library that is set to export for Actionscript. most likely in frame 1. This will cause your movie's download to wait until that object is downloaded to the user's computer. If there is more than one object with this setting, then all of those objects will need to download first before the movie can begin, or to stream.
    The problem of your your movie now showing up is completely different. It's impossible to tell where the problem is from looking at the html pages that you provided. The problem may be simple, you may not have the .swf in the proper folder, or the name may not coincide with the swfobject function that you are using.

  • Error message "Page header or footer longer than a page"

    Hi
    Our application call crystal report to generate/display crystal report in PDF format. We have a dev system to test this, all looking good, however when we moved to production server, the attached error message is displayed when running crystal report. 
    Invoking method GENERATEREPORT returned error Page Header plus Page Footer is too large for the page.
    Error in File C:\DOCUME~1\SERV
    IC1.LIM\LOCALS1\Temp\temp coq new xxxx.rpt:
    Page header or footer longer than a page.
    Same report doesnu2019t get this error message if running it from crystal report developer. 
    Not all crystal reports got this error, but some of reports display strange view in PDF, the content of report are reduced in a paper size like label size, not A4 size.  I have checked the default printer on the server, it points to a normal window printer, not a label printer. I have checked all possible settings on production server and compared with dev server, all looks same to me
    I suspect the label printing size is used somehow when the report is previewed in pdf format, not normal A4 size although I have selected a normal window printer as a default printer on the window,what else should i check?
    Could you please shed some light on this?
    Thanks!
    Li

    I found the issue is from label printer that is setup on the production server. After I removed the label printer from the server, then error message is gone, all report running fine.
    This label printer is not the default window printer, it is a network printer but is configured as a printer using local port on the server.
    I think for some reasons, crystal report alway picks up the label printer page size, not the normla page size, I am not sure why and how crystal report do this, it should pick up the default printer, which is a normal printer.
    There is no error when I run report within CR. The error happens only when I try to generate crystal report from our application.
    I do have logo in page header/footer, subreports in report footer, but I don't think they cause the problem, because I can run same report without any problem in dev system.
    Any idea what I should check next?
    Thanks

  • Boot drive error message

    Following a near disaster after installing security update 2005-009 i have 2 problems ( or maybe only 1)
    When i do a verify on my boot drive i get the message from disk utility, INCORRECT NUMBER OF THREAD RECORDS, volume needs repair but it cannot fix it.
    Any suggestions.
    Second after I managed to get my boot drive running again following many kernel panics I now have a folder called damaged files, can I discard this as it seems to mirror my HD

    Hi, Paul and Allan, et.al —
    Paul — Fwiw, I agree with Allan about your apparent options.
    When you launched Disk Utility from your Install Disc as part of running Disk First Aid, did you notice the S.M.A.R.T. status of your HD?
    Before saying another word — have you tried to access and save any data that may not have been included in your last backup? Using FireWire Target Disk Mode from another (or borrowed) Mac might be a means to accomplish this...
    I'm not familiar with the specific "incorrect number of thread records" error message you received — so everything below should be considered conjectural or based on the perspective of the references cited. Each file and folder (directory) in an HFS+ file system must have a unique thread record. Apple describes the technical details in technical note TN1150: HFS+ Volume Format and the File Manager Reference. On a more layperson's level — paraphrasing and quoting from this source and its linked refs. — on an HFS+ formatted volume, a Catalog file contains records for all the files and directories stored in the volume. File thread records and directory thread records are two of four types of records contained in the catalog file. A file thread record stores just the name of the file and the Catalog Node ID (CNID) of its parent directory; similarly, a directory thread record stores its name and the CNID of its parent directory. The other two records are file records and directory records that "store a variety of metadata — including CNID, size, time-stamps, the first file extents of the data and resource forks, and pointers to the file's first data and resource extent records in the Extent Overflow File."
    My point in considering this is that an incorrect number of thread records suggests that the catalog file can't do its job properly in helping you to access your files and directories. As Allan concluded, this sounds like a potentially significant disk directory problem. Although the terminology differs, a MicroMat (makers of TechTool) tech addresses a TechTool "file thread mismatch (-92) error" message in this MacFixIt forum thread. Several users report their experiences. If the Disk Utility "incorrect number" and TechTool "thread mismatch" messages are comparable... the MicroMat tech's comment that "Unfortunately, the file thread mismatch is an uncommon disk directory error, and it is not possible to know whether the ultimate cause is software or hardware" may be relevant.
    I hope that you follow Allan's advice — and that DiskWarrior 3.0.3, TechTool Pro 4.0.6, or ProSoft's DriveGenius 1.1.5 is able to repair the problem — or that you're in a position to perform an Erase & Install. Please keep us apprised of your progress, so others may learn from your experience.
    Good luck!
    Dean

  • Attaching Error Status to Outbound IDOC. ?

    Hello Experts,
    We have a scenario in SAP PI / XI were upon creation of a Sales Order , Purchase Order or Material Master Flow to Non-SAP System through SAP PI/XI , the IDOC shouldn't flow to SAP PI following a validation on Material Group.
    The IDOC is triggered through Output Type , there is a custom Z function module which create outbound communication IDOC. This output type is attached to a Process Code ZSO, ZMPO defined for respective scenarios defined above.
    Currently i am attaching the the status = 07 to control data structure & the IDOC is getting created but is having error.
    Is this the right practice to follow for attaching error message Outbound IDOC.
    Awaiting for your response.
    Best Regards
    Priyesh Shah

    It depends on the business requirement.
    in a previous project, if there was any error during the validation of the data within the iDoc before it is created and sent, i would trigger an error and send the error to the person who created the data with the error for them to correct.  they would then correct the error within the document and save and the iDoc would be triggered and sent correctly.

  • Error Message at Start Up

    Can anyone tell me how to clear the attached error message. It comes up at every start up.
    Solved!
    Go to Solution.
    Attachments:
    Error Message.txt ‏1 KB

    Thanks Jerry, you are correct-
    I found this solution on another board. It worked!
    Please click on Start, Click on Run and type the following in the open box and click OK
    msconfig
    Vista: In the Start Search field, type msconfig , and press Enter . The System Configuration window opens.
    Or
    Press and hold Windows logo key on keyboard and press R. It will open Run Window. Type the following in the open box and click OK
    MSconfig
    The System Configuration window opens.
    Please click on Startup tab
    Remove the check mark from entries related to Mywebsearch OR M3PLUGIN.DLL
    Then click on Apply, Close and Please click on Exit without restart.
    When the system restarts, you will see a message about System Configuration Utility. Click in the box for "Do not Show this message" and then click on OK.

  • Editingutils.js error message dreamweaver cs4

    I keep getting this the attached error message using Dreamweaver CS4, spry framework utilizing a number of spry widgets.
    CollapsiblePanels
    Spry Forms Widgets
    I have made changes to the span id names associated with each of the form widgets.
    I've reviewed this link http://kb2.adobe.com/cps/401/kb401257.html
    However the files described do not contain the following lines and changes
    Edit SpryTabbedPanelsDesignTime.js and make the following changes:
    THIS DOES NOT EXIST IN THE FILE IN CS4
    Go to line 188. Change:
    eval("opts = " + args[ 1 ]);
    to:
    try { eval("opts = " + args[ 1 ]); } catch(e) { opts = null; }
    Save the file.
    Edit SpryCollapsiblePanelDesignTime.js and make the following changes:
    THIS DOES NOT EXIST IN THE FILE IN CS4
    Go to line 188. Change:
    eval("opts = " + args[ 1 ]);
    to:
    try { eval("opts = " + args[ 1 ]); } catch(e) { opts = null; }
    Save the file.
    Launch Dreamweaver and verify that you can now load your file.
    Any other solutions?

    I have resolved the editingutils.js by breaking up the forms, but it is not the solution I'm really looking for.
    Each of the 6 forms on seperate pages are 450 lines of code.
    Form sample.
    http://irexs.com/betatest001/can/listCANCommercial.cfmhttp://www.irexs.com/betatest001/
    I want to be able to have multiple forms on one page, nested in spry collapsible panels.
    I'm using DW CS4 and Coldfusion 8 server, forms utilize SPRY form fields (not cfforms).
    In order to reslove the editingutils.js I had to break up the forms, but have considered an alternate solution.
    In each panel the forms are nested via cfinculdes; structure as follows.
    <div col panel>
         <div col panel content>
              <form spry fields>
                   <cfincludes location form file>
                   <cfincludes details form file>
              <form end>
         <dev col panel content ent>
    <div col panel end>
    WHAT I WANT TO ACCOMPLISH is as follows.
    Sample page
    http://irexs.com/betatest001/can/listCAN.cfm
    Forms are to be inserted in the panel content section as described above.
    ISSUES ARE:
    I have limited JavaScript knowledge.
    For the forms to work i require the the panels in closed state at page load: This is done.
    ON FORM SUBMIT, I need the panel to stay OPEN, when client side or server side submit requires correction to the form.
    What happens now is the page refreshes and the panel closes: the default state.
    SOLUTION DESIRED, is to have the selected panel to stay open and the input information to remain when form is submitted.
    Thanks for any help.

  • Scripting for error messages

    Hi,
    1.On a selection-screen with four select -options as s_vbeln,s_vkorg,s_vtweg,s_spart. I need to validate and write a error message ' enter atleast one field' if it is executed without any values.
    2.Also validation should be done that the entered value is correct or incorrect and if it is incorrect it should show the error message concerned to the fields for example if the vkorg value is entered incorrect , it should display'' please enter valid entry' respectively to all the fields.
    Can anyone send me a code on how to perform this.
    Thanks,
    Stalin.

    Using function module 'FORMAT_MESSAGE' you can capture the messages.
    Here is a sample of the program code for that:
    LOOP AT it_messtab.
    CALL FUNCTION 'FORMAT_MESSAGE'
    EXPORTING
    id = it_messtab-msgid
    lang = it_messtab-msgspra
    no = it_messtab-msgnr
    v1 = it_messtab-msgv1
    v2 = it_messtab-msgv2
    IMPORTING
    msg = g_msg
    EXCEPTIONS
    OTHERS = 0.
    IF it_messtab-msgtyp = 'S'.
    it_sucess-sucess_rec = g_msg.
    it_sucess-lifnr = it_header-lifnr." Based on your field
    it_sucess-tabix = v_lines.
    APPEND it_sucess.
    ELSEIF it_messtab-msgtyp = 'E'.
    it_error-error_rec = g_msg.
    it_error-lifnr = it_header-lifnr.
    it_error-tabix = v_lines.
    APPEND it_error.
    ELSE.
    it_info-info_rec = g_msg.
    it_info-lifnr = it_header-lifnr.
    it_info-tabix = v_lines.
    APPEND it_info.
    ENDIF.
    ENDLOOP.

  • LV Startup error message - windows installer

    Hello Everyone,
    Whenever I launch startup LV, I get the attached error message. I had installed an application which was located in a network drive. The application was deleted from the network and from my pc. Its no longer used but whenever I launch LV, this message comes up (and at various other times). Is there any way I can get fix this it short of a full re-install?
    thanks.
    Attachments:
    Error Msg.bmp ‏1039 KB

    Hi DavidT!
    The image that you attached said that it is looking for "install.msi". If you had a shortcut to LabVIEW, it should have been pointing towards LabVIEW.exe.
    Secondly, what do you mean by "I had installed an application which was located in a network drive. The application was deleted from the network and from my pc. Its no longer used...". By "application" do you mean an EXE file that you created using Application Builder in LabVIEW? If so, it shouldn't make a difference if you delete the application or not (for starting up LabVIEW purposes).
    Maybe a better explanation of your situation might help too! However, if time is critical, I would probably just reinstall LabVIEW. It really doesn't take that long!
    Hope this helps!
    Travis H.
    National Instruments
    Travis H.
    LabVIEW R&D
    National Instruments

  • Update muse and made changes to home page now getting this error message... error calling selector function: Security error:Failed to read the content document html Iframe element

    Made changes on my home page and it looks great in the preview in browser, but when i upload to my server I get the attached error message. PLEASE HELP!!!

    It's common for opening a locally exported website that contains Social widgets or other third party code to generate security errors because it will be loaded in the browser using file:// protocol. When a site is previewed from Muse (in Muse or in browser) or uploaded to a hosting provider it's served using http:// (or https://) protocol and the security errors don't occur.
    The third party code that comes with using the Social widgets or any other widgets that rely on third party code and/or services is frequently not designed to work over file:// protocol.

  • Adobe Updater Error Message

    For several weks now any time the Adobe Updater tries to run I get the attached error message.  It occurs no matter which Adobe program I am in nor whether it is an automatic update or a manual one.  I have tried changing my Firewall settings and this has not helped.  Does anyone have any ideas what to do and how to correct this?  I looked through the forums and did not see this problem listed.  BJinNM

    Thank you so much, Ankush!  I know the back and forth emails didn't appear on this forum since I couldn't send you the attachments you need but I wanted to publically say thanks.  Another one of your tech guys just posted the same solution done below (email from HTH) so it shows on this thread now.  I apppreciate your persistence and all your help.
    BJinNM

  • MDC error message -  'incorrect search policy'

    Having re-installed Mountain Lion on my MDC and Clients and NOT deleted any Xsan Sys Prefs and KeyChain passwords, finally managed to get all my clients Authorized OK.
    Then attached my Retina Display MBP through a Thunderbolt to FC convertor box (Promise SanLink) to the FC switch ... the RetDisp MDC mounts the SAN Vol just fine and can read and write to it OK (terrific being able to attached 28TB of fast FC storage to my MBP!) ... however, on the MacMini MDC now get an error message for the RetDisp MBP saying 'incorrect search policy' for the laptop.
    Blaidd Drwg has already supplied in the previous thread a link to a useful Apple KB article which I'll share here:
    "Incorrect search policy": http://support.apple.com/kb/HT3888
    I am using XSAN to manage accounts and log-ins and not Open Directory ... will see if this fixes the problem.
    Neil

    http://support.apple.com/kb/HT3888
    This KB fixed the problem .... you have to change the search directories on the client not on the MDC ... then it's fixed straight away on the MDC.
    Being able to have my RetDisp MBP laptop access the FC XSAN volume is sweet! .. running Resolve 9 on it and grading 5k EPIC files is pretty amazing .. Thunderbolt to HD SDI BMD box and into a calibrated reference monitor to give accurate colors plus Tbolt RedRocket card in Sonnet enclosure .. unreal.
    Nesxt step .. adding a Win 7 PC through StorNext FX2 ... should be fun :-)
    Neil

  • Help: Error message "ORA-12560 TNS:Protocol Adapter Error "

    I tried to install Oracle 8i EE version 8.1.7 on Windows 2000. Everything is OK until the installation proceeded to installing "Oracle Database Configuration Assistant". At that point, I got an error message "ORA-12560 TNS:Protocol Adapter Error (network not loaded)". I looked up the error message. The cause of the error said: "This error occurs when the SQL*Net driver cannot find the JSB driver because you may have either forgotten to load the JSB driver (for instance MFTP) or used an incorrect TCP_VENDOR key (for example, TCP_VENDOR=NOVLWP).". And the suggested action said: "Load the JSB driver or use the correct TCP_VENDOR key.". I am using a standalone PC with Windows 2000 at home, and the PC does not connect to any network(except that I can dialup to internet via modem). What should I do? I can't understand the error message. Any expert to help me overcome the error?
    null

    database tnsnames.ora
    =========
    # TNSNAMES.ORA Network Configuration File: D:\Oracle\network\admin\tnsnames.ora
    # Generated by Oracle configuration tools.
    ORCL =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = mohsin-pc)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = ORCL)
    INST1_HTTP =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = mohsin-pc)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = SHARED)
    (SERVICE_NAME = MODOSE)
    (PRESENTATION = http://HRService)
    EXTPROC_CONNECTION_DATA =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
    (CONNECT_DATA =
    (SID = PLSExtProc)
    (PRESENTATION = RO)
    developer 10g tnsnames.ora
    ==============
    # tnsnames.ora Network Configuration File: D:\Forms\network\admin\tnsnames.ora
    # Generated by Oracle configuration tools.
    EXTPROC_CONNECTION_DATA =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.132)(PORT = 1521))
    (CONNECT_DATA =
    (SERVICE_NAME = Dedicated)
    ORCL =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = mohsin-pc)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = ORCL)
    Please tell me what changes I needed
    database serivice name is "ORCL'
    and my pc name is "mohsin-pc"

  • OAK3 error message - Specifications for the mean value methods incorrectly

    Hello experts,
    After golive of sap ECC system of our client, when the auditors check the consistency of depreciaion areas in transaction OAK3, the error message is appearing under the depreciation area 01 as "Specifications for the mean value methods incorrectly defined". Can anybody throw some light on how to encounter this error message?
    Thanks

    Hi,
    1) Usually, the reason why the error occurs is that you have no area defined in the chart of depreciation.
    2) Also please check the attached note 847289.     
    3) Please also run OIB5 and check if capitalization version is assigned to depreciation area 01                                            
    If you use capitalization versions it is necessary to have a depreciation area with area type 07 (Cost-acc. valuation) which     
    get the whole amounts.                                                                               
    The depreciation area which takes the values to 100 % must have the following features:                                                 
    => The currency of the depreciation area should have the currency of the controlling area                                          
    => The depreciation area should have the depreciation area type "07 Cost-acc. valuation"                                         
    => The area should not have a capitalization version       
    regards Bernhard

  • I have files that have been on my computer for over a year and all of a sudden they wont open and an error message comes up saying they were improperly downloaded or came in an email attach which is not the case

    I have files that have been on my computer for over a year and I have used them several times and all of a sudden they wont open.  I received an error message saying they are improperly downloaded or came as an email attachement which is not the case.  Please advise

    They seem to be word files - they will open if I choose "open with" microsoft word, but if I double click they don't open they are appearing as PDF on my screen.  I even opened one and then tried to "save as" making sure I chose .doc and they still appear as PDF
    I just created a new document response.doc in word and when I saved to my desktop it appears as a PDF file and I absolutely did not create a PDF or save as PDF it was a simple word
    doc.
    The message says "Adobe reader could not open response.doc because it is either not a supported file type or because the file has been damaged (for example attached in an email and not properly decoded)
    The reader version is I believe the most current, I always update when prompted.  OS is Windows 8

Maybe you are looking for