T60P FCC id's for FCC US custom's Form

Hello Thinkpad user's
I'm from Canada and i ship my old T60p to Us California, now, my T60p stay at American custom's and the staff waiting for FCC 740 custom's form.
Can some one help me to find the FCC id's to fill the custom form and rapidly ship the laptop.
T60p 8741- c3f
Thz to all for a fast reply
First T22,Next T43,T60P, W700 and S10-3, now W540 (SSD, 16RAM, i7 4800, Etc :-)

As you have seen above, Apple make their rules/requirements as a condition of obtaining a book selling/free account.
You wasted time wnadering around the tax website and you selected the wrong form. All the information required to obtain an EIN number from the US tax office is on the discussion group.
Whatever your form filling problems are, only you can decide IF you want to apply to Apple for a suitable account to allow you to submit your book to their iBooks Store.
Its an easy process to download the correct document in PDF form, print it off, fill it in and have with you when you telephone the corect office in the US. I t will then take about 10 - 15 minutes to answer the question syou will be asked and which you have in writing in front of you to save time.
BTW, in Aussie, you will also need an ABN number and if you plan selling books, check your banks requirents to recieve payments from the USA.
If you have an iTunes Connect account - check out the banking and contracts section for full requirements.
You can step through the process and opt out anytime without submitting.
You can start here for ideas and information.
https://discussions.apple.com/message/17598506#17598506

Similar Messages

IDM : Customizing User Forms and/or Interfaces

Good morning.
Ok, I do not know if this is the right place to post this Issue. But, I can't seem to find any other forum which deals directly with IDM issues (believe it or not, Sun's Website is absolutely USELESS).
Here's the thing :
I am currently developing an IDM System.
The version I am developing is the latest one : IDM 8.1
I have created the Resources (LDAP and Active Directory), and done the reconciliation. I've performed all the usual and necessary user-operations (create user, edit user, create role, edit role, etc , etc).
In short, the IDM is working perfectly...............
....except for one thing : "Customizing (User) Forms"
The IDM I've created is intended for various users; some have administrator rights and access, some don't; some are mere users, some are Human Resources, some are IT, etc, etc
The point is : I want to create different "Forms" and/or "Interfaces" for some of these different users.
I know the theory behind this : I need to CUSTOMIZE a specific User Form.
I also know that it is not advisable to modify the Standard XML Forms which come with the IDM package. The advice is to copy the ones you need to modify, and then make the changes to the copies.
Here's the million-dollar question : HOW CAN I DO THIS?
I have checked, and re-checked, and browsed every site imaginable --- from Sun, to Google, to Facebook. I have not found a single helpful answer to this question. Everywhere, everyone talks about WHAT needs to be done to create Custom Forms or Interfaces; but nobody cares to say HOW it should be done.
Including our wonderful Sun Microsystems!
Could anyone please tell me, in straightforward terms, how to customize Forms, and how to implement these customized forms into the IDM instance ?
Thank you.

Please try Directory Servers / Identity Management - Sun Java System Identity Manager forum @ [http://forums.sun.com/forum.jspa?forumID=764]

Printing confirmation of balance for vendors and customer-urgent

Hi,
Thanx Vamsi for the reply.
I have got 1 more doubt.we are using CUSTOMISED correspondence types.The annexure we give has only the open items.But the users want a list of cleared items to appear in the list.
Will the confirmation have only open items ???? or can it take even the cleared items along with it.Can the print program be modified to take even the cleared items along with it.
Kindly advise.
Thanks in advance
Regards
Karpagam

Hi,
We are using print program SAPF130K and SAPF130D for vendor and customer respectively.
My query is can we bring even the cleared items alongwith the open items in the same print program???
Now we have line items of open line items only?? As per our exploration into the program... we get only open items..
Also we are using SAP10 and SAP11 as the correspondence type.Kindly advise as to correspondence type should be changed so that it can print both the open and cleared items?
Please reply ASAP as it is very urgent.
Thanks in advance.
Regards
Karpagam

Changing customer number in alv top of page for every new customer

hi experts,
in alv grid display top-of- page, how to change customer number customer name for every new customer.
please help me.
Regards
Naveen.

You may look into this blog
http://help-abap.blogspot.com/2008/09/salv-model-5-add-header-top-of-page.html
This is has been contributed by one of the SCN contributor Naimesh Patel.
a®

Dunning letters for one-time customer

Hi,
I have looked through the program of SAPF150V which F150 will execute the dunning and placed the customer data in MHNK.
My issue is the customer address are drawn from master table, which one-time customer (customer id is shared by several customer, hence the address would be differently stored in SAP) may have problem since the address is not stored in the standard SAP master table.
Apart from changing the calling program, is that anyway to do the configuration in order to cater the one-time customer dunning process?
Thank you in advance for advice.

Hi,
The only difference in the process of dunning for one time customer and normal customer is that, the dunning frequency for one-time accounts is not checked in the master record but for each individual document.
Apart from this, there is no specific configuration as such for dunning of one time customer.
You can refer the below link:
http://help.sap.com/erp2005_ehp_05/helpdata/EN/01/a9c58a455711d182b40000e829fbfe/frameset.htm
Regards,
Kiron Kumar T.

Techical field ( and Table ) for Promotion type for a particular Customer

Hi All,
Where can I find the promotion type for a particular Customer?
Thanks,
Sanjeet

Hi Suman,
I think you are talking about Transaction VB33.
Table - KONA (Rebate Agreements)
Field - KNUMA (Agreement (various conditions grouped together))
Structure - RV13A (Input/Output Fields for Price Element Maintenance)
Field - KNUMA_PI (Promotion)
And if you want based on particular customer..
Table - KOTE003 (Customer)
Field - KNUMA (Agreement (various conditions grouped together))
Table - KOTE004 (Customer Hierarchy)
Field - KNUMA (Agreement (various conditions grouped together))
Best Regards,
Sayak

FG stock on a particular date for a specific customer

Hi all,
I need to develop one report in which i need FG stock for a particular customer on a particular date. For ex on 5/11/11 what was the FG stock against xyz customer.
Is there any logic available for this requirement. can you please tell me which tables i should look for?
Thanks

FG stock for a particular customer on a particular date.
Is it Make to Order stock? If it is not, then you may not find the details. If it is MTO, then use t.code MB5B. Using this, you can find stock on particular date.
Regards,

Multiple address for the same customer code

Hi,
Suppose we have a customer name XYZ LTD whose sap code is 123.
Now user want to maintain multiple addresses for the same customer in the same code.So that during billing he can have option to chose one of the address in which he want to sent the invoice.
Is it posible if yes then let me know.
Thanks in advance.
Regards,
SATYA

Hi Satya,
you can define for a vendor/customer several partner functions with different
adresses. You can create certain partner roles several times.
If you create a purchase order, than you can choose the wanted
address and partnerrole on the header level. In the standard system you
can use the patner role 'OA' ordering address and for the finance
the 'IP' Invoice presented by.
I hope I was able to help you.
Kind regards,
Zsuzsanna

Multiple Partners for the same customer in Message tracking of SEEBURGER

Hi,
This is for third party customers which use EDI messages. We have for one customer multiple partner numbers configured in Partner profile. I would like to know while configuring the trading partners in SEEBURGER Message Tracking, can we have multiple keys for the same customer for multiple partners for an INVOIC02. Like the following keys:
12345_INVOIC02
34567_INVOIC02
45678_INVOIC02

Hi Satya,
you can define for a vendor/customer several partner functions with different
adresses. You can create certain partner roles several times.
If you create a purchase order, than you can choose the wanted
address and partnerrole on the header level. In the standard system you
can use the patner role 'OA' ordering address and for the finance
the 'IP' Invoice presented by.
I hope I was able to help you.
Kind regards,
Zsuzsanna

Adding values for a single customer

Hi Everybody,
I am facing a programming issue. I have to do something like this:
For a each customer, for all open items for that customer, I have to add the amount due at every period in aging in Accounts receivable. So for example, if I have two customers: A and B and
A has 5 open items
B has 3 open items
for each open item there is an amount due for both customers. So what i have to do is add for A 1+2 = amount 1.
amount 1 + 3 = amount 2, amount 24 = amount 3, amount 35 = amount 4.
Similarly for B also I have to do the same thing. Right now my amount are getting added up into one single value at each line of the table. So for all customers it is just getting added in every row of the table and not seperately for every new customer.
Can somebody suggest something or give some example?
Please help.
Thanks & regards,
AM

I'm not sure I understand what you are trying to do. Is it something like:
REPORT ztest.
TABLES: bsid.
PARAMETERS p_bukrs LIKE bsid-bukrs.
SELECT-OPTIONS s_kunnr FOR bsid-kunnr.
DATA: BEGIN OF itab OCCURS 0,
        bukrs LIKE bsid-bukrs,
        kunnr LIKE bsid-kunnr,
        under_30_amt LIKE bsid-dmbtr,
        under_60_amt LIKE bsid-dmbtr,
        under_90_amt LIKE bsid-dmbtr,
        over_90_amt LIKE bsid-dmbtr,
      END   OF itab.
DATA: under_30_date LIKE sy-datum,
      under_60_date LIKE sy-datum,
      under_90_date LIKE sy-datum,
      over_90_date LIKE sy-datum.
under_30_date = sy-datum - 30.
under_60_date = sy-datum - 60.
under_90_date = sy-datum - 90.
over_90_date = sy-datum - 30.
SELECT bukrs kunnr bldat dmbtr
INTO CORRESPONDING FIELDS OF bsid
FROM bsid
WHERE bukrs = p_bukrs
    AND kunnr IN s_kunnr.
CLEAR itab.
MOVE: bsid-bukrs TO itab-bukrs,
        bsid-kunnr TO itab-kunnr.
IF bsid-bldat > under_30_date.
    MOVE bsid-dmbtr TO itab-under_30_amt.
ELSEIF bsid-bldat > under_60_date.
    MOVE bsid-dmbtr TO itab-under_60_amt.
ELSEIF bsid-bldat > under_90_date.
    MOVE bsid-dmbtr TO itab-under_90_amt.
ELSE.
    MOVE bsid-dmbtr TO itab-over_90_amt.
ENDIF.
COLLECT itab.
ENDSELECT.
LOOP AT itab.
WRITE: /001 itab-bukrs,
              itab-kunnr,
              itab-under_30_amt,
              itab-under_60_amt,
              itab-under_90_amt,
              itab-over_90_amt.
ENDLOOP.
<i>Caveats</i>
I'm not sure what date you should use for aging. I used the document date. Maybe it's the baseline date. Maybe it's something else.
Collect is inefficient. You might want to do it another way.
I may be way off base - you may be doing something else entirely.
Rob

I need to set up an expense form so that our consultant can "filter" by customer type, program type, and finally the purpose of the trip. For instance: the customer types are churches, schools, organizations. The program type would be fund raising, gift p

I need to set up an expense form so that our consultant can "filter" by customer type, program type, and finally the purpose of the trip. For instance: the customer types are churches, schools, organizations. The program type would be dependent on the customer type selection from the first list. Some examples would be: fund raising, gift planning, surveys, and others. The purpose of the trip would be dependent on the program type selected from the second list. Some examples of trip purposes would be: presentation, design, prospecting. Further, the purpose of trip selection from the third drop-down box would then have to determine the values of other fields by expense type: such as commission, airfare, hotel. etc. I've tried pop-up menu but can't figure out how to "select" from the final popup list and have it populate a field for the purpose of the trip. I've tried to look at the JavaScript examples for dependent drop-down boxes, but can't find any that quite fit what I'm trying to accomplish. I am very new to all of this. No training in writing Javascripts - just trying to wing it. The form has to be very simple for our consultants to use, but also give our office the detail we need to process through the correct account numbers. I would appreciate any detailed step-by-step instructions - kind of a javascript for dummies type of info. HELP!

An AcroForm is the name given to the type of PDF form that you create in Acrobat. An XFA form is the type of form that you create in LiveCycle Designer. Although they are both PDF files, they are very different structurally and have significant;y different scripting models. So pay attention to the information on AcroForms and ignore anything about XFA. Be sure to get the sample PDF forms so you can look at how it works and where the scripts are placed.
What you want to do will require scripting, and if you don't have the experience and are unable to use the information in the tutorials to create what you want, you might consider getting someone who has experience do this for you. I'll often suggest code if I can do so quickly, but what you want requires more than a few minutes.

Querying up AR Customer OA page in read-only mode for a Single Customer

We are building a Custom Form in which associated Customer <defined in AR> would be queried up.
Now we want to give an option to the User to view the complete details of the Customer. We would be giving a menu option in Tools 'View Customer' thru which he would see the Full Customer Details. <AR Customer OA page>
We have two requirements
1> The Full Customer Details should show up in Standard OA Customer Page the moment page comes up. The user should not be required to query the details.
2> It should be read-only and user should not be able to update any field.
How can we achieve this requirement? I did some RnD but did not see any place in EBS where we display the Customer Page in read-only mode and that too quried up for one particular customer.
Thanks
Arun

Hi Arun,
Please let me know if find any solution for this. We have a similar scenario in which we need to call the customer Page with all the inforamtion populated, related to one customer.
Thanks in advance,
Mannuru

Count no. of records for a particular customer in the query?

Hi,
1)Can anybody guide as to how do we count the number of records for a particular customer. E.g.
C1 has placed 2 orders
C2 has placed 4 orders
C3 has placed 5 orders
so in all the ODS has 11 records. Now while designing the query we need to ensure that we show only the Customers who have placed more than 3 orders. What could be logic to solve this kind of a problem?
2) Is there a way that we can access the structure and data of the ODS in ABAP code say one of the includes in a user exit?
The requirement says there could be N number of cases opened and closed in one month. Now we need to calculate the average number of days taken to close a case? Any ideas on the possible solution.
Thanks
RB

Hi Rajat,
Take a calculated key figure rename it as Count , go to the properties of that calculated key figure on the left hand side not at the columns side in the properties click on the button Enhance which is shown in the down left side, in the exception aggregation part select "count all values <>0" , take the reference character as customer Id . Now go to the Customer character which is in rows go to properties and select "Normalise to" combo box in that select "Query result" now u will get the exact result which ur looking for .

How to create a sales order for one-time customer

Hi all,
I have a requirement where in creating a sales order, I have to add the tax code for one-time customer. This is not the tax jurisdiction but it is a text field that you can see in Further attributes and it will store in VBPA3 table.
My plan was create sales order first using SD_SALESDOCUMENT_CREATE or BAPI_SALESORDER_CREATEFROMDAT2. Then I used BDC of va02 for changing the salesdoc. But the problem is, we can't proceed because there's a message "TAX HAVE REDETERMINED" that it doesn't included in recording a transaction.
Another one is, instead of calling the standard bapi, I used BDC for VA01. Again, upon recording there was anothe message popped up "FREIGHT REDETERMINED". And it's not in the recording so we can't proceed.
Would you know what field is for the tax code when I use SD_SALESDOCUMENT_CREATE or any standard bapi? Is there other way aside from calling a standard bapi or bdc?
Points will be given..Thanks!

Good afternoon Bella,
We are in a project that exactly need this solution. Could yoy please explain me how you solve the issue ?
Kind regards

Error while entering transaction for a new customer in release 12.1.1

Hi,
I created a new customer in receivables (am using the version 12.1.1)
First i got an error while creating the customer saying, "Provide a positive integer for minimum customer balance amount or percent when balance amount overdue type is amount or percent respectively"
I corrected the profile class amounts and now am allowed to create the customer but now the error comes while entering a transaction for this new customer:
"The system cannot determine geographical information for this location and cannot derive a tax jurisdiction. Please contact your system administrator"
please suggest a solution.
regards,
Shilpa

I faced the same problem, Doc ID 420194.1 solved the problem. Shilpa kindly post the solutions moving forward so the users can benefit from it. Thank you!
Solution
run Geography Reference Program with parameter "Country code" for all records.
Navigate to Trading Community Manager ->
Requests -> Run
Select "Geography Name Referencing" program
Processing for Table : HZ_LOCATIONS and Run Type : ALL
Parameters: Country Code :US
Usage Code :ALL
From Location Id :NULL: To Location Id:NULL
Start Date :NULL: End Date:NULL
Number of workers:1
Total number of Processed Locations:9
Number of Successfully Processed Locations:9
Number of Locations in Error:0

T60P FCC id's for FCC US custom's Form

Similar Messages

Maybe you are looking for