Tab Order setting does not persist
Hi There,
We have one specific form (a dynamic, flowed form, with repeating subforms and fragments), that we need to have automatic Tab Ordering.
We have found that (for this form only) the Tab Order keeps resetting to Custom. We are working on the xdp file, and it means that we need to remember to reset it to "Automatic" just before saving everytime (when we save the PDF).
Is there something in the xdp that would cause it for an individual form? Is this something we can fix?
Thanks
I have also been having issues in regards to the tab order. We contacted Adobe and they apparently had trouble understanding what our issues were. We had the same thing you are running into with the tab order resetting, but never could figure out why it did. When we sent our file to Adobe, they told us it was working fine when they looked at it and they closed our ticket stating that our issue was resolved.
Well it isn't resolved and here we sit with forms that don't tab correctly if we don't reset the order EVERY time (sometimes even if we do set the tab order it goes wonky on us).
So if you contact them and get an answer please share!
Similar Messages
-
EJB 3.0 - JSF APPLICATION: DATA DOES NOT PERSIST TO THE DATABASE
Hi,
I am developing a JSF - EJB application and the data that I send from JSP Page through JSF Managed Bean --> Session Bean --> Java Persistence does not persist in database.
Here is my scenario ( Iam using JDeveloper IDE to create this application) -
SCENARIO START
The scenario consists of two web pages, one enlisting all the users stored in the database, the other contains a form for adding a user
1.) INDEX.JSP
2.) ADDUSER.JSP
Step 1: Create the USERS Table in database
CREATE TABLE users
user_id serial,
username varchar(255) NOT NULL,
first_name varchar(255),
last_name varchar(255),
password char(64) NOT NULL,
CONSTRAINT pk_users PRIMARY KEY (user_id)
Step 2: Add Database Connection To JDeveloper
Go to Database Connection Navigator and create a New Database Connection using the Wizard
Step 3: Create a New Application in JDeveloper and select JSF, EJB from Application Template
Step 4: ENTITY BEAN - In the EJB Node Right Click and Select EJB à New Entites from Table (JPA/EJB3.0)
Use The Wizard and create Entity Bean from Users Table which creates an Entity Bea POJO file as follows –
User.java -
package lux.domain;
import java.io.Serializable;
import javax.persistence.Column;
import javax.persistence.Entity;
import javax.persistence.GeneratedValue;
import javax.persistence.GenerationType;
import javax.persistence.Id;
import javax.persistence.NamedQuery;
import javax.persistence.SequenceGenerator;
import javax.persistence.Table;
@Entity
@NamedQuery(name = "User.findAll", query = "select o from User o")
@Table(name = "USERS")
public class User implements Serializable {
@Column(name="FIRST_NAME")
private String firstName;
@Column(name="LAST_NAME")
private String lastName;
@Column(nullable = false)
private String password;
@Column(nullable = false)
private String username;
@Id
@GeneratedValue(strategy=GenerationType.SEQUENCE, generator="users_seq_generator")
@SequenceGenerator(name="users_seq_generator", sequenceName="users_user_id_seq")
@Column(name="USER_ID", nullable = false)
private Long userId;
public User() {
public String getFirstName() {
return firstName;
public void setFirstName(String firstName) {
this.firstName = firstName;
public String getLastName() {
return lastName;
public void setLastName(String lastName) {
this.lastName = lastName;
public String getPassword() {
return password;
public void setPassword(String password) {
this.password = password;
public String getUsername() {
return username;
public void setUsername(String username) {
this.username = username;
public Long getUserId() {
return userId;
public void setUserId(Long userId) {
this.userId = userId;
Step 5: STATELESS SESSION BEAN - In the EJB Node Right Click and Select EJB à New Entites from Table (JPA/EJB3.0)
Again Right Click on Model and create Session Bean from Wizard which creates two files –
UserDAOBean.java – Stateless Session Bean
UserDAO.java – Local Interface
package lux.facade;
import java.security.MessageDigest;
import java.security.NoSuchAlgorithmException;
import java.util.List;
import java.util.logging.Level;
import java.util.logging.Logger;
import javax.ejb.Stateless;
import javax.persistence.EntityManager;
import javax.persistence.PersistenceContext;
import javax.persistence.Query;
import lux.domain.User;
@Stateless(name="UserDAO")
public class UserDAOBean implements UserDAO {
@PersistenceContext(unitName="Model")
private EntityManager em;
public UserDAOBean() {
public User getUser(int UserId) {
User u = new User();
u = em.find(User.class, UserId);
return u;
public List<User> getAllUsers() {
Query q = em.createQuery("SELECT u FROM User u");
List<User> users = q.getResultList();
return users;
public void createUser(User u) {
String hashedPw = hashPassword(u.getPassword());
u.setPassword(hashedPw);
em.persist(u);
public void updateUser(User u) {
String hashedPw = hashPassword(u.getPassword());
u.setPassword(hashedPw);
em.merge(u);
public void deleteUser(User u) {
em.remove(u);
private String hashPassword(String password) {
StringBuilder sb = new StringBuilder();
try {
MessageDigest messageDigest = MessageDigest.getInstance("SHA");
byte[] bs;
bs = messageDigest.digest(password.getBytes());
for (int i = 0; i < bs.length; i++) {
String hexVal = Integer.toHexString(0xFF & bs);
if (hexVal.length() == 1) {
sb.append("0");
sb.append(hexVal);
} catch (NoSuchAlgorithmException ex) {
Logger.getLogger(UserDAOBean.class.getName()).log(Level.SEVERE, null, ex);
return sb.toString();
Step 6: Create a Deployment file in the Model and Deploy this to a JAR file
Step 7: Now Right Click on View/Controller Node and create a Java File –
UserController.java -
package lux.controllers;
import javax.ejb.EJB;
import javax.faces.model.DataModel;
import javax.faces.model.ListDataModel;
import lux.domain.User;
import lux.facade.UserDAO;
public class UserController {
@EJB UserDAO userDao;
private User user;
private DataModel model;
public String createUser() {
this.user = new User();
return "create_new_user";
public String saveUser() {
String r = "success";
try {
userDao.createUser(user);
} catch (Exception e) {
e.printStackTrace();
r = "failed";
return r;
public DataModel getUsers() {
model = new ListDataModel(userDao.getAllUsers());
return model;
public User getUser() {
return user;
public void setUser(User user) {
this.user = user;
Step 8: Configure page flow in faces-config.xml
1. Create the JSP file adduser.jsp by right-clicking View-Controller
node and selecting New > JSP. Use the wizard to create JSF – JSP Page, fill in
File Name adduser.jsp, click Finish. -
<%@page contentType="text/html"%>
<%@page pageEncoding="UTF-8"%>
<%@taglib prefix="f" uri="http://java.sun.com/jsf/core"%>
<%@taglib prefix="h" uri="http://java.sun.com/jsf/html"%>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
<title>New user</title>
</head>
<body>
<f:view>
<h:form>
<h:messages/>
<h:panelGrid columns="2">
<h:outputText value="Username"/>
<h:inputText
id="Username"
value="#{user.user.username}"
required="true"/>
<h:outputText value="First name"/>
<h:inputText
id="FirstName"
value="#{user.user.firstName}" />
<h:outputText value="Last name"/>
<h:inputText
id="LastName"
value="#{user.user.lastName}" />
<h:outputText value="Password" />
<h:inputSecret
id="Password"
value="#{user.user.password}"
required="true" />
<h:panelGroup/>
<h:commandButton
action="#{user.saveUser}"
value="Save"/>
</h:panelGrid>
</h:form>
</f:view>
</body>
</html>
2. Repeat the previous step for another JSP file failed.jsp.
3. On failed.jsp add the string
Save failed
Next we configure the page flow.
1. Open faces-config.xml.
2. Create index.jsp -
<%@page contentType="text/html"%>
<%@page pageEncoding="UTF-8"%>
<%@taglib prefix="f" uri="http://java.sun.com/jsf/core"%>
<%@taglib prefix="h" uri="http://java.sun.com/jsf/html"%>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
<title>User Listing</title>
</head>
<body>
<f:view>
<h:form>
<h:outputText value="User Listing"/>
<h:commandLink action="#{user.createUser}" value="Create a user"/>
<h:dataTable value="#{user.user}"
var="dataTableItem" border="1" cellpadding="2" cellspacing="2">
<h:column>
<f:facet name="header">
<h:outputText value="Username"/>
</f:facet>
<h:outputText value="#{dataTableItem.username}" />
</h:column>
<h:column>
<f:facet name="header">
<h:outputText value="First name"/>
</f:facet>
<h:outputText value="#{dataTableItem.firstName}" />
</h:column>
<h:column>
<f:facet name="header">
<h:outputText value="Last name"/>
</f:facet>
<h:outputText value="#{dataTableItem.lastName}" />
</h:column>
</h:dataTable>
</h:form>
</f:view>
</body>
</html>
3. Drag an arrow from index.jsp to adduser.jsp and replace the arrow’s label to create_new_user.
4. Repeat the previous step for failed, by dragging and arrow from adduser.jsp to failed.jsp renaming the label to f
ailed
5. Finally repeat the step for adduser.jsp, by dragging from adduser.jsp to index.jsp renaming the label to success.
This creates the following faces-config.xml file –
<?xml version='1.0' encoding='UTF-8'?>
<faces-config>
<managed-bean>
<managed-bean-name>user</managed-bean-name>
<managed-bean-class>lux.controllers.UserController</managed-bean-class>
<managed-bean-scope>session</managed-bean-scope>
<managed-property>
<property-name>username</property-name>
<value>#{username}</value>
</managed-property>
<managed-property>
<property-name>firstName</property-name>
<value>#{firstName}</value>
</managed-property>
<managed-property>
<property-name>lastName</property-name>
<value>#{lastName}</value>
</managed-property>
<managed-property>
<property-name>password</property-name>
<value>#{password}</value>
</managed-property>
</managed-bean>
<navigation-rule>
<from-view-id>/index.jsp</from-view-id>
<navigation-case>
<from-outcome>create_new_user</from-outcome>
<to-view-id>/adduser.jsp</to-view-id>
</navigation-case>
</navigation-rule>
<navigation-rule>
<from-view-id>/adduser.jsp</from-view-id>
<navigation-case>
<from-outcome>failed</from-outcome>
<to-view-id>/failed.jsp</to-view-id>
</navigation-case>
<navigation-case>
<from-outcome>success</from-outcome>
<to-view-id>/index.jsp</to-view-id>
</navigation-case>
</navigation-rule>
</faces-config>
Step 9: Create a Deployment file in the View-Controller and Deploy this to a WAR file
Step 10: Create a Deployment file in the View-Controller and create an EAR file and add Model’s JAR and View-Controller’s
WAR files to it.
Step 11: Run the JSP Files
SCENARIO END
Now, When I execute Index.jsp, it does not list values from database and when I click on Create User link, it takes me to adduser.jsp page. When I fill values in this page and click Save button, it takes me to Save Failed page and data does not persist to the database.
WHAT IS WRONG OUT HERE ???If you set a breakpoint in your createUser method - does this code get executed?
We have a couple of tutorials that might show you how to do this.
EJB/JSF with ADF-binding tutorial:
http://www.oracle.com/technology/obe/obe1013jdev/10131/ejb_and_jpa/master-detail_pagewith_ejb.htm
EJB/JSF without ADF binding:
http://www.oracle.com/technology/obe/JavaEE_tutorial_10131/index.htm -
EJB-JSF Application : Data does not persist to the database
Hi,
I am developing a JSF - EJB application and the data that I send from JSP Page through JSF Managed Bean --> Session Bean --> Java Persistence does not persist in database.
Here is my scenario ( Iam using JDeveloper IDE to create this application) -
SCENARIO START
The scenario consists of two web pages, one enlisting all the users stored in the database, the other contains a form for adding a user
1.) INDEX.JSP
2.) ADDUSER.JSP
Step 1: Create the USERS Table in database
CREATE TABLE users
user_id serial,
username varchar(255) NOT NULL,
first_name varchar(255),
last_name varchar(255),
password char(64) NOT NULL,
CONSTRAINT pk_users PRIMARY KEY (user_id)
Step 2: Add Database Connection To JDeveloper
Go to Database Connection Navigator and create a New Database Connection using the Wizard
Step 3: Create a New Application in JDeveloper and select JSF, EJB from Application Template
Step 4: ENTITY BEAN - In the EJB Node Right Click and Select EJB � New Entites from Table (JPA/EJB3.0)
Use The Wizard and create Entity Bean from Users Table which creates an Entity Bea POJO file as follows �
User.java -
package lux.domain;
import java.io.Serializable;
import javax.persistence.Column;
import javax.persistence.Entity;
import javax.persistence.GeneratedValue;
import javax.persistence.GenerationType;
import javax.persistence.Id;
import javax.persistence.NamedQuery;
import javax.persistence.SequenceGenerator;
import javax.persistence.Table;
@Entity
@NamedQuery(name = "User.findAll", query = "select o from User o")
@Table(name = "USERS")
public class User implements Serializable {
@Column(name="FIRST_NAME")
private String firstName;
@Column(name="LAST_NAME")
private String lastName;
@Column(nullable = false)
private String password;
@Column(nullable = false)
private String username;
@Id
@GeneratedValue(strategy=GenerationType.SEQUENCE, generator="users_seq_generator")
@SequenceGenerator(name="users_seq_generator", sequenceName="users_user_id_seq")
@Column(name="USER_ID", nullable = false)
private Long userId;
public User() {
public String getFirstName() {
return firstName;
public void setFirstName(String firstName) {
this.firstName = firstName;
public String getLastName() {
return lastName;
public void setLastName(String lastName) {
this.lastName = lastName;
public String getPassword() {
return password;
public void setPassword(String password) {
this.password = password;
public String getUsername() {
return username;
public void setUsername(String username) {
this.username = username;
public Long getUserId() {
return userId;
public void setUserId(Long userId) {
this.userId = userId;
Step 5: STATELESS SESSION BEAN - In the EJB Node Right Click and Select EJB � New Entites from Table (JPA/EJB3.0)
Again Right Click on Model and create Session Bean from Wizard which creates two files �
UserDAOBean.java � Stateless Session Bean
UserDAO.java � Local Interface
package lux.facade;
import java.security.MessageDigest;
import java.security.NoSuchAlgorithmException;
import java.util.List;
import java.util.logging.Level;
import java.util.logging.Logger;
import javax.ejb.Stateless;
import javax.persistence.EntityManager;
import javax.persistence.PersistenceContext;
import javax.persistence.Query;
import lux.domain.User;
@Stateless(name="UserDAO")
public class UserDAOBean implements UserDAO {
@PersistenceContext(unitName="Model")
private EntityManager em;
public UserDAOBean() {
public User getUser(int UserId) {
User u = new User();
u = em.find(User.class, UserId);
return u;
public List<User> getAllUsers() {
Query q = em.createQuery("SELECT u FROM User u");
List<User> users = q.getResultList();
return users;
public void createUser(User u) {
String hashedPw = hashPassword(u.getPassword());
u.setPassword(hashedPw);
em.persist(u);
public void updateUser(User u) {
String hashedPw = hashPassword(u.getPassword());
u.setPassword(hashedPw);
em.merge(u);
public void deleteUser(User u) {
em.remove(u);
private String hashPassword(String password) {
StringBuilder sb = new StringBuilder();
try {
MessageDigest messageDigest = MessageDigest.getInstance("SHA");
byte[] bs;
bs = messageDigest.digest(password.getBytes());
for (int i = 0; i < bs.length; i++) {
String hexVal = Integer.toHexString(0xFF & bs);
if (hexVal.length() == 1) {
sb.append("0");
sb.append(hexVal);
} catch (NoSuchAlgorithmException ex) {
Logger.getLogger(UserDAOBean.class.getName()).log(Level.SEVERE, null, ex);
return sb.toString();
Step 6: Create a Deployment file in the Model and Deploy this to a JAR file
Step 7: Now Right Click on View/Controller Node and create a Java File �
UserController.java -
package lux.controllers;
import javax.ejb.EJB;
import javax.faces.model.DataModel;
import javax.faces.model.ListDataModel;
import lux.domain.User;
import lux.facade.UserDAO;
public class UserController {
@EJB UserDAO userDao;
private User user;
private DataModel model;
public String createUser() {
this.user = new User();
return "create_new_user";
public String saveUser() {
String r = "success";
try {
userDao.createUser(user);
} catch (Exception e) {
e.printStackTrace();
r = "failed";
return r;
public DataModel getUsers() {
model = new ListDataModel(userDao.getAllUsers());
return model;
public User getUser() {
return user;
public void setUser(User user) {
this.user = user;
Step 8: Configure page flow in faces-config.xml
1. Create the JSP file adduser.jsp by right-clicking View-Controller
node and selecting New > JSP. Use the wizard to create JSF � JSP Page, fill in
File Name adduser.jsp, click Finish. -
<%@page contentType="text/html"%>
<%@page pageEncoding="UTF-8"%>
<%@taglib prefix="f" uri="http://java.sun.com/jsf/core"%>
<%@taglib prefix="h" uri="http://java.sun.com/jsf/html"%>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
<title>New user</title>
</head>
<body>
<f:view>
<h:form>
<h:messages/>
<h:panelGrid columns="2">
<h:outputText value="Username"/>
<h:inputText
id="Username"
value="#{user.user.username}"
required="true"/>
<h:outputText value="First name"/>
<h:inputText
id="FirstName"
value="#{user.user.firstName}" />
<h:outputText value="Last name"/>
<h:inputText
id="LastName"
value="#{user.user.lastName}" />
<h:outputText value="Password" />
<h:inputSecret
id="Password"
value="#{user.user.password}"
required="true" />
<h:panelGroup/>
<h:commandButton
action="#{user.saveUser}"
value="Save"/>
</h:panelGrid>
</h:form>
</f:view>
</body>
</html>
2. Repeat the previous step for another JSP file failed.jsp.
3. On failed.jsp add the string
Save failed
Next we configure the page flow.
1. Open faces-config.xml.
2. Create index.jsp -
<%@page contentType="text/html"%>
<%@page pageEncoding="UTF-8"%>
<%@taglib prefix="f" uri="http://java.sun.com/jsf/core"%>
<%@taglib prefix="h" uri="http://java.sun.com/jsf/html"%>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
<title>User Listing</title>
</head>
<body>
<f:view>
<h:form>
<h:outputText value="User Listing"/>
<h:commandLink action="#{user.createUser}" value="Create a user"/>
<h:dataTable value="#{user.user}"
var="dataTableItem" border="1" cellpadding="2" cellspacing="2">
<h:column>
<f:facet name="header">
<h:outputText value="Username"/>
</f:facet>
<h:outputText value="#{dataTableItem.username}" />
</h:column>
<h:column>
<f:facet name="header">
<h:outputText value="First name"/>
</f:facet>
<h:outputText value="#{dataTableItem.firstName}" />
</h:column>
<h:column>
<f:facet name="header">
<h:outputText value="Last name"/>
</f:facet>
<h:outputText value="#{dataTableItem.lastName}" />
</h:column>
</h:dataTable>
</h:form>
</f:view>
</body>
</html>
3. Drag an arrow from index.jsp to adduser.jsp and replace the arrow�s label to create_new_user.
4. Repeat the previous step for failed, by dragging and arrow from adduser.jsp to failed.jsp renaming the label to f
ailed
5. Finally repeat the step for adduser.jsp, by dragging from adduser.jsp to index.jsp renaming the label to success.
This creates the following faces-config.xml file �
<?xml version='1.0' encoding='UTF-8'?>
<faces-config>
<managed-bean>
<managed-bean-name>user</managed-bean-name>
<managed-bean-class>lux.controllers.UserController</managed-bean-class>
<managed-bean-scope>session</managed-bean-scope>
<managed-property>
<property-name>username</property-name>
<value>#{username}</value>
</managed-property>
<managed-property>
<property-name>firstName</property-name>
<value>#{firstName}</value>
</managed-property>
<managed-property>
<property-name>lastName</property-name>
<value>#{lastName}</value>
</managed-property>
<managed-property>
<property-name>password</property-name>
<value>#{password}</value>
</managed-property>
</managed-bean>
<navigation-rule>
<from-view-id>/index.jsp</from-view-id>
<navigation-case>
<from-outcome>create_new_user</from-outcome>
<to-view-id>/adduser.jsp</to-view-id>
</navigation-case>
</navigation-rule>
<navigation-rule>
<from-view-id>/adduser.jsp</from-view-id>
<navigation-case>
<from-outcome>failed</from-outcome>
<to-view-id>/failed.jsp</to-view-id>
</navigation-case>
<navigation-case>
<from-outcome>success</from-outcome>
<to-view-id>/index.jsp</to-view-id>
</navigation-case>
</navigation-rule>
</faces-config>
Step 9: Create a Deployment file in the View-Controller and Deploy this to a WAR file
Step 10: Create a Deployment file in the View-Controller and create an EAR file and add Model�s JAR and View-Controller�s
WAR files to it.
Step 11: Run the JSP Files
SCENARIO END
Now, When I execute Index.jsp, it does not list values from database and when I click on Create User link, it takes me to adduser.jsp page. When I fill values in this page and click Save button, it takes me to Save Failed page and data does not persist to the database.
WHAT IS WRONG OUT HERE ???If you set a breakpoint in your createUser method - does this code get executed?
We have a couple of tutorials that might show you how to do this.
EJB/JSF with ADF-binding tutorial:
http://www.oracle.com/technology/obe/obe1013jdev/10131/ejb_and_jpa/master-detail_pagewith_ejb.htm
EJB/JSF without ADF binding:
http://www.oracle.com/technology/obe/JavaEE_tutorial_10131/index.htm -
Need to create a sales order that does not create demand
Hi,
We need to create a no cost sales order - that does not create demand
In our current set-up when we try to create a no cost sales order with a material ( It Cat = Norm) we see demand being created in MD04
What configuration settings will allow us a deliverable order - that does not create demand (no MRP run?)
Thanks,
SMHello,
For this set of requirement i think the best option would be to configure a New Sales Order Type and a new Schedule Line Category. In VOV6, While you are defining a new Schedule line category in the transaction flow make sure to switch off the three check box.
Transfer of requirements / Begin assembly order from SD
Availability check for sales
Product allocation active
Then when we are assigning this newly defined Schedule line Category to Item category, make sure to leave the field of MRP Type as blank in VOV5.
Regards,
Sarthak -
Your Application Set does not match the applications in your Retrieval Rule
Hi,
While creating the time card iam getting the error:Your Application Set does not match the applications in your Retrieval Rule Group.
Please Suggest the solution.
ThanksIn Our case, we created a new PERSON TYPE in HR and we forgot to add this type to OTL Preferences.
So in the above scenario:
Go to US OTL Application Developer -> Preferences ->
In the Eligibility Tab. add new row
Name of Rule => any unique name
Name of Branch => enter the name of an existing branch which the time card preferences are going to be the same.
Link By => We use Person Type... You can choose PERSON here but i would not know why you would want to do that
Linked To => Person Type you want to have this for
Precedence => Unique Number
From => make sure to enter an earlier date especially when people are required to enter older than todays timecard since this field defaults to today.
If you totally dont have or want to build a new preference, then you will have to go to the Preference Tab and create a new branch.
in ours, we have Timekeeper and TimeStore and Employees
in Timekeeper -> we have timekeeper timecard layout
in TimeStore -> we have approval style, entry level processing rule, time entry rule groups, timestore retrieval rule group
in Employees -> all we have is really those preferences we;d like to see. Date Format, Enter Negative Hours, Enter Override Approver, Number of Empty Rows, Timecard Delete Allowed, Timecard Layout, Number of Recent Timecards displayed, timecard status allowing edits.
Hope the above helps -
Why Set does not have get() method
Can some one tell me why set does not have get method?...
user12203354 wrote:
ya u are right that designer of this class thought there is no implementation required for get but why he/she thought like this...
there must be some valid reason for the same.Because a Set's purpose is not to keep things in order; it's to ensure there are no duplicate entries. Set would require extra code to be able to keep track of an order.
Note that there is a Set implementation that does keep track of insertion order--LinkedHashSet--but it doesn't have a get() method. -
Result set does not fit; it contains too many rows
Dear All,
We are in BI7 and running reports on Excel 2007. Even though number of rows limitation in Excel 2007 is more than 1Million, when I try to execute a report with more than 65k records of output, system is generating output only for 65k rows with message "Result set does not fit; it contains too many rows".
Our Patch levels:
GUI - 7.10
Patch level is 11
Is there any way to generate more than 65000 rows in Bex?
Thanks in advance...
regards,
Raju
Dear Gurus,
Could you please shed some light on this issue?
thanks and regards,
Raju
Edited by: VaraPrasadraju Potturi on Apr 14, 2009 3:13 AMVara Prasad,
This has been discussed on the forums - for reasons of backward compatibility I do not think BEx supports more that 65000 rows .... I am still not sure about the same since I have not tried out a query with more that 65K rows on excel 2007 but I think this is not possible... -
Data roaming setting does not show up on iPhone 4S
My wife got a new iPhone 4S from Verizon a few weeks and and she's been using it with no probolems since then. Yesterday we crossed the board into Canada and I tried to turn "Data Roaming" off on her phone but the "Data Roaming" setting does not exist in Settings->General->Network. On my Verizon iPhoen 4S it has the optios "Voice Roaming" and "Data Roaming" but on hers only "Voice Roaming".
I was able to turn off all cellular data but that's actually inconvenient because we're right on the border and often go in an out of US cell converage areas, so with data roaming off it lets me use data whenever there's a US cell signal and otherwise prevents me from using data on a Canadian signal, but with all cellular data off, you have to constantly be toggling the setting when you think you go from a cell tower in the Canada to one in the US.
Does anybody have any idea why the "Data Roaming" setting does not exist on her phone yet it does on mine? Both phones are running iOS 5.0.1.On your wife's phone: Dial *228. When prompted, select 2 to update her roaming capabilities. When complete, you will hear a confirmation message. In about a minute, you will also see an alert that your service update is complete. See if doing that fixes things.
-
JSF - EJB 3.0 Application - Data does not persist to the database
Hi,
I am developing a JSF - EJB application and the data that I send from JSP Page through JSF Managed Bean --> Session Bean --> Java Persistence does not persist in database.
Here is my scenario ( Iam using JDeveloper IDE to create this application) -
------------------------------------------------------- SCENARIO START
The scenario consists of two web pages, one enlisting all the users stored in the database, the other contains a form for adding a user
1.) INDEX.JSP
2.) ADDUSER.JSP
Step 1: Create the USERS Table in database
CREATE TABLE users
user_id serial,
username varchar(255) NOT NULL,
first_name varchar(255),
last_name varchar(255),
password char(64) NOT NULL,
CONSTRAINT pk_users PRIMARY KEY (user_id)
Step 2: Add Database Connection To JDeveloper
Go to Database Connection Navigator and create a New Database Connection using the Wizard
Step 3: Create a New Application in JDeveloper and select JSF, EJB from Application Template
Step 4: ENTITY BEAN - In the EJB Node Right Click and Select EJB � New Entites from Table (JPA/EJB3.0)
Use The Wizard and create Entity Bean from Users Table which creates an Entity Bea POJO file as follows �
User.java -
package lux.domain;
import java.io.Serializable;
import javax.persistence.Column;
import javax.persistence.Entity;
import javax.persistence.GeneratedValue;
import javax.persistence.GenerationType;
import javax.persistence.Id;
import javax.persistence.NamedQuery;
import javax.persistence.SequenceGenerator;
import javax.persistence.Table;
@Entity
@NamedQuery(name = "User.findAll", query = "select o from User o")
@Table(name = "USERS")
public class User implements Serializable {
@Column(name="FIRST_NAME")
private String firstName;
@Column(name="LAST_NAME")
private String lastName;
@Column(nullable = false)
private String password;
@Column(nullable = false)
private String username;
@Id
@GeneratedValue(strategy=GenerationType.SEQUENCE, generator="users_seq_generator")
@SequenceGenerator(name="users_seq_generator", sequenceName="users_user_id_seq")
@Column(name="USER_ID", nullable = false)
private Long userId;
public User() {
public String getFirstName() {
return firstName;
public void setFirstName(String firstName) {
this.firstName = firstName;
public String getLastName() {
return lastName;
public void setLastName(String lastName) {
this.lastName = lastName;
public String getPassword() {
return password;
public void setPassword(String password) {
this.password = password;
public String getUsername() {
return username;
public void setUsername(String username) {
this.username = username;
public Long getUserId() {
return userId;
public void setUserId(Long userId) {
this.userId = userId;
Step 5: STATELESS SESSION BEAN - In the EJB Node Right Click and Select EJB � New Entites from Table (JPA/EJB3.0)
Again Right Click on Model and create Session Bean from Wizard which creates two files �
UserDAOBean.java � Stateless Session Bean
UserDAO.java � Local Interface
package lux.facade;
import java.security.MessageDigest;
import java.security.NoSuchAlgorithmException;
import java.util.List;
import java.util.logging.Level;
import java.util.logging.Logger;
import javax.ejb.Stateless;
import javax.persistence.EntityManager;
import javax.persistence.PersistenceContext;
import javax.persistence.Query;
import lux.domain.User;
@Stateless(name="UserDAO")
public class UserDAOBean implements UserDAO {
@PersistenceContext(unitName="Model")
private EntityManager em;
public UserDAOBean() {
public User getUser(int UserId) {
User u = new User();
u = em.find(User.class, UserId);
return u;
public List<User> getAllUsers() {
Query q = em.createQuery("SELECT u FROM User u");
List<User> users = q.getResultList();
return users;
public void createUser(User u) {
String hashedPw = hashPassword(u.getPassword());
u.setPassword(hashedPw);
em.persist(u);
public void updateUser(User u) {
String hashedPw = hashPassword(u.getPassword());
u.setPassword(hashedPw);
em.merge(u);
public void deleteUser(User u) {
em.remove(u);
private String hashPassword(String password) {
StringBuilder sb = new StringBuilder();
try {
MessageDigest messageDigest = MessageDigest.getInstance("SHA");
byte[] bs;
bs = messageDigest.digest(password.getBytes());
for (int i = 0; i < bs.length; i++) {
String hexVal = Integer.toHexString(0xFF & bs);
if (hexVal.length() == 1) {
sb.append("0");
sb.append(hexVal);
} catch (NoSuchAlgorithmException ex) {
Logger.getLogger(UserDAOBean.class.getName()).log(Level.SEVERE, null, ex);
return sb.toString();
Step 6: Create a Deployment file in the Model and Deploy this to a JAR file
Step 7: Now Right Click on View/Controller Node and create a Java File �
UserController.java -
package lux.controllers;
import javax.ejb.EJB;
import javax.faces.model.DataModel;
import javax.faces.model.ListDataModel;
import lux.domain.User;
import lux.facade.UserDAO;
public class UserController {
@EJB UserDAO userDao;
private User user;
private DataModel model;
public String createUser() {
this.user = new User();
return "create_new_user";
public String saveUser() {
String r = "success";
try {
userDao.createUser(user);
} catch (Exception e) {
e.printStackTrace();
r = "failed";
return r;
public DataModel getUsers() {
model = new ListDataModel(userDao.getAllUsers());
return model;
public User getUser() {
return user;
public void setUser(User user) {
this.user = user;
Step 8: Configure page flow in faces-config.xml
1. Create the JSP file adduser.jsp by right-clicking View-Controller
node and selecting New > JSP. Use the wizard to create JSF � JSP Page, fill in
File Name adduser.jsp, click Finish. -
<%@page contentType="text/html"%>
<%@page pageEncoding="UTF-8"%>
<%@taglib prefix="f" uri="http://java.sun.com/jsf/core"%>
<%@taglib prefix="h" uri="http://java.sun.com/jsf/html"%>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
<title>New user</title>
</head>
<body>
<f:view>
<h:form>
<h:messages/>
<h:panelGrid columns="2">
<h:outputText value="Username"/>
<h:inputText
id="Username"
value="#{user.user.username}"
required="true"/>
<h:outputText value="First name"/>
<h:inputText
id="FirstName"
value="#{user.user.firstName}" />
<h:outputText value="Last name"/>
<h:inputText
id="LastName"
value="#{user.user.lastName}" />
<h:outputText value="Password" />
<h:inputSecret
id="Password"
value="#{user.user.password}"
required="true" />
<h:panelGroup/>
<h:commandButton
action="#{user.saveUser}"
value="Save"/>
</h:panelGrid>
</h:form>
</f:view>
</body>
</html>
2. Repeat the previous step for another JSP file failed.jsp.
3. On failed.jsp add the string <h2>Save failed</h2>.
Next we configure the page flow.
1. Open faces-config.xml.
2. Create index.jsp -
<%@page contentType="text/html"%>
<%@page pageEncoding="UTF-8"%>
<%@taglib prefix="f" uri="http://java.sun.com/jsf/core"%>
<%@taglib prefix="h" uri="http://java.sun.com/jsf/html"%>
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"
"http://www.w3.org/TR/html4/loose.dtd">
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
<title>User Listing</title>
</head>
<body>
<f:view>
<h:form>
<h1><h:outputText value="User Listing"/></h1>
<p><h:commandLink action="#{user.createUser}" value="Create a user"/></p>
<h:dataTable value="#{user.user}"
var="dataTableItem" border="1" cellpadding="2" cellspacing="2">
<h:column>
<f:facet name="header">
<h:outputText value="Username"/>
</f:facet>
<h:outputText value="#{dataTableItem.username}" />
</h:column>
<h:column>
<f:facet name="header">
<h:outputText value="First name"/>
</f:facet>
<h:outputText value="#{dataTableItem.firstName}" />
</h:column>
<h:column>
<f:facet name="header">
<h:outputText value="Last name"/>
</f:facet>
<h:outputText value="#{dataTableItem.lastName}" />
</h:column>
</h:dataTable>
</h:form>
</f:view>
</body>
</html>
3. Drag an arrow from index.jsp to adduser.jsp and replace the arrow�s label to create_new_user.
4. Repeat the previous step for failed, by dragging and arrow from adduser.jsp to failed.jsp renaming the label to f
ailed
5. Finally repeat the step for adduser.jsp, by dragging from adduser.jsp to index.jsp renaming the label to success.
This creates the following faces-config.xml file �
<?xml version='1.0' encoding='UTF-8'?>
<faces-config>
<managed-bean>
<managed-bean-name>user</managed-bean-name>
<managed-bean-class>lux.controllers.UserController</managed-bean-class>
<managed-bean-scope>session</managed-bean-scope>
<managed-property>
<property-name>username</property-name>
<value>#{username}</value>
</managed-property>
<managed-property>
<property-name>firstName</property-name>
<value>#{firstName}</value>
</managed-property>
<managed-property>
<property-name>lastName</property-name>
<value>#{lastName}</value>
</managed-property>
<managed-property>
<property-name>password</property-name>
<value>#{password}</value>
</managed-property>
</managed-bean>
<navigation-rule>
<from-view-id>/index.jsp</from-view-id>
<navigation-case>
<from-outcome>create_new_user</from-outcome>
<to-view-id>/adduser.jsp</to-view-id>
</navigation-case>
</navigation-rule>
<navigation-rule>
<from-view-id>/adduser.jsp</from-view-id>
<navigation-case>
<from-outcome>failed</from-outcome>
<to-view-id>/failed.jsp</to-view-id>
</navigation-case>
<navigation-case>
<from-outcome>success</from-outcome>
<to-view-id>/index.jsp</to-view-id>
</navigation-case>
</navigation-rule>
</faces-config>
Step 9: Create a Deployment file in the View-Controller and Deploy this to a WAR file
Step 10: Create a Deployment file in the View-Controller and create an EAR file and add Model�s JAR and View-Controller�s
WAR files to it.
Step 11: Run the JSP Files
------------------------------------------------------- SCENARIO END
Now, When I execute Index.jsp, it does not list values from database and when I click on Create User link, it takes me to adduser.jsp page. When I fill values in this page and click Save button, it takes me to Save Failed page and data does not persist to the database.
WHAT IS WRONG OUT HERE ???PLZZZZZZZZZzzzzzzzzzzz HELP ! ! !
-
System setting does not allow changes to be made to object LSYS
Hi
Im trying to create the process chain in BW-Production System . Like im trying to delete the PSA data for one datasource in BI7.0 .
Im using the 'Delete requests from the PSA' process type in the process chain . When i try to give the datasource name and source system name in the variant of 'Delete requests from the PSA' process type and save them , then it is saying that
System setting does not allow changes to be made to object LSYS
Why it is saying like that . But i can able to include the other process types in the process chain .
regards
mohammedDear Mohammed,
Since you are trying to create process chain in production system.
Normally production system wont be open for development at any time. Why the system settings does not allow changes was, your production is not modifiable state.
Check the settings in SE06. system would be non-modifiable for sure.
in SCC4, settings ->"changes to the cross customizing objects would be not allowed"
These two settings/configurations would not allow any development or changes or edit or create in production.
Please check with your basis folks and proceed further.
Hope this would help you more in understanding -
System setting does not allow changes to be made to object
Hi experts,
I implelemt ST-PI/A today and apply note 1300023. There is a information(???) message keep warning
"System setting does not allow changes to be made to object NOTE 0001300023". I think I should SE06 to modify system change option, but I don't know which one. Please help.Hi,
If you login in German you can see the variable %1 being replaced by "SDF/" in the Help window.
Or you can find the text in the note:
«/SDF/CCMS_READ CCMS_CREATE_COMP_DOWNLOAD»
Go to SE03 and expand Administration node, Set System Change Option and set Namespace prefix /SDF to Modifiable.
Regards,
André Nunes -
System setting does not allow changes to be object CLAS /1SEM/CL_FACTORY_30
hi,
Recently we upgraded our BW system from BW 3.0B to BW 3.5.In BW 3.5,we created a planning area to which we
assigned a transactional cube.Now when we are going for creating variables or planning levels for the planning area it
gives the following error:
System setting does not allow changes to be object CLAS /1SEM/CL_FACTORY_300ZPLAN
Our support packages are as following:
SAP_BASIS 640 0009
SAP_ABA 640 0009
ST-PI 2005_1_640 0000
PI_BASIS 2004_1_640 0006
SAP_BW 350 0009
BI_CONT 353 0000
Could you please suggest or help us in resolving the issue ?
thanks and regards,
YogeshHello,
the above mentioned note is too old. Please check note 781371.
Please also check in transaction SM30 view V_TRNSPACE
the record for /1SEM/:
Namespace: /1SEM/
Namespace role C
Repair License
SSCR Popup X
SAP Standard X
Gen Objs Only X
Regards,
Gregor -
Load remote images in html mail setting does not get saved. I have to turn it off every time I log in. Is this a bug?
Plug your phone into the wall charger for at least 30 minutes...make sure you have a sim card in the phone...then:
Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.
Make sure you have no anti-virus software running or any firewalls...turn all of that stuff off. -
ORA-13754: "SQL Tuning Set" "" does not exist for user "SYS"
While calling dbms_stats.seed_col_usage I got the following error. Can someone help me on how to resolve it
sqlplus
SQL*Plus: Release 11.2.0.1.0 Production on Thu Apr 14 14:37:38 2011
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Enter user-name: / as sysdba
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> select * from v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
TNS for IBM/AIX RISC System/6000: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
SQL> show user
USER is "SYS"
SQL> begin
2 dbms_stats.seed_col_usage(null,null,400);
3 end;
4 /
begin
ERROR at line 1:
ORA-13754: "SQL Tuning Set" "" does not exist for user "SYS".
ORA-06512: at "SYS.DBMS_SQLTUNE_INTERNAL", line 17379
ORA-06512: at "SYS.DBMS_STATS", line 28451
ORA-06512: at line 2
Thank You
SarayuAccording to the documentation:
SEED_COL_USAGE ProcedureThis procedure iterates over the SQL statements in the specified SQL tuning set, compiles them and seeds column usage information for the columns that appear in these statements.
Syntax
DBMS_STATS.SEED_COL_USAGE (
sqlset_name IN VARCHAR2,
owner_name IN VARCHAR2,
time_limit IN POSITIVE DEFAULT NULL);>
It looks like you need to provide a SQLSET_NAME and OWNER_NAME to use this procedure correctly, to which you've provided NULLs. I don't see any exceptions in the documentation that indicate special processing when NULLs are provided. -
GS004 Set does not exist. PCA account groups
I ran transaction KE5B to copy the financial statement version to PCA account groups. I did not use a suffix or prefix.
The result was an account group has been created in profit center accounting (classic G/L). I can see this account group in transaction KDH3 and I can even change and save it in KDH2. Now when I run a list oriented report from the menu tree (report group 8A26) and I select this account group, the system reports the error GS004 Set does not exist.
The funny thing is when I run an interactive report in PCA and I select the same account group, I don't get this error message and the reports just run.
Please help me out, I need to run these list oriented reports.
BR, EdwinHi,
How was everything going on? Have you create a run as account and distribute it to specific computers that being monitored?
Please through the below blog to build your runas account:
Configuring Run As Accounts and Profiles in OpsMgr – A SQL Management Pack Example
http://blogs.technet.com/b/kevinholman/archive/2010/09/08/configuring-run-as-accounts-and-profiles-in-r2-a-sql-management-pack-example.aspx
In addtion, here is a similar thread for your reference:
Run As Account does not exist on the target system or does not have enough permissions
http://social.technet.microsoft.com/Forums/en-US/b3c90ac5-c932-4b13-a5a9-e6991f09e60e/run-as-account-does-not-exist-on-the-target-system-or-does-not-have-enough-permissions?forum=operationsmanagergeneral
Regards,
Yan Li
Regards, Yan Li
Maybe you are looking for
-
Firefox will not download to my computer
When I click on, Download Firefox for free, on the main page, it asks to run or save. I click run, it downloads, and closes the first download box, but thats it. wont show up anywhere on my computer. help please?
-
Signatures not firing correctly
I'm having an issue with signatures not firing correctly. Some of the backdoor trojan signatures are firing, the NSDB says that it is looking for a certain string in the packet going over a certain port. This has happened on several signatures. I get
-
Can i get a new iPhone 5 if i cracked my screen?
if so how?
-
I have a macbook pro os 10.7.5 and my mail icon has disappeared from my dock with a pop up box that says Mail Quit Unexpectedly. I have used the spotlight to find Mail, and have tried several more times to open the mail, but it closes with the same p
-
Fidelity told me to upgrade browser. I installed safari 7 only to find out my macbook pro doesn't support it. How do I uninstall?