Tabbing Between Forms

Hi
Im working on a poll about people style life in housing and homes
later, after the identification of person, i go to the housing tab and in the las question ask the number of homes.....
it look like something like this:
Well, that what i need its when i  input de number of homes and click the button accept, de application automatically get "on" the home tab
(the color of the tab set in "on" its gray, setting in "off" its green) sending me to a new form Home and display too the number of Homes that i put on the past question
it will be look like this:
in short, i need that the text box when i input n number, generate me a new tab list with the n tabs that i sent from the text box

Sounds like you might want to simply set the tab's selectedIndex to whatever
is the home's index when you hit the accept button.  The form code will
probably use creationComplete to set focus to the first input field in the
form.

Similar Messages

  • I can no longer tab between cells in a table with pages 5.0.

    I use pages everyday for filling in my work booking sheets. I need to have them synching to the cloud, so I can access the client information while on the road.
    My booking sheet is basically a large table with many cells for name, address, phone number, etc. In pages 4.3 I could enter some information into the cell, hit the tab button, and it would go straight to the next cell in the table. This was a quick and easy way for me to fill out my forms on the computer.
    Well, since the update, the tab button only moves the cursor over in the same cell, as opposed to the next cell. It is VERY rare to need to tab in a cell, as opposed to going to the next cell.
    I did figure out that I could Option+ Tab to move to the next cell, but it is very hard to change my procedure of tabbing after all this timing doing it the other way.
    Am I just missing a preferance to tab between cells, instead of inside a cell?
    Thanks
    Dave

    Option-tab makes sense and can be done with the left hand's thumb/forefinger.
    Using tab was always arse-backwards as it defeated the use of tab within the table cell.
    Best to use both for what they always do:
    Option tab or an arrow key (singular) to jump cells
    tab to jump to the next tab in the text wherever it is within or without cells.
    The contrary precedence was set by Microsoft and was a bad idea. In good UI you do not have shortucts reverse roles such that you need to pay excessive attention to the context.
    Peter

  • Large number of http posts navigating between forms

    Hi,
    i'm not really a forms person (well not since v3/4 running character mode on a mainframe!), so please be patient if I'm not providing the most useful information.
    An oracle forms 10 system that I have fallen into supporting has to me very poor performance in doing simple things like navigating between forms/tabs.
    Looking at the java console (Running Sun JRE 1.6.0_17), and turning on network tracing, I can see a much larger number of post requests than I would expect (I looked here first as initially we had an issue with every request going via a proxy server, and I wondered if we had lost the bypass proxy setting). Only a normal number of GETS though.
    Moving to one particualr detail form from a master record is generating over 300 post requests - I'v confirmed this looking at the Apache logs on the server. This is the worst one I have found, but in general the application appears to be extremely 'chatty'
    The only other system I work with which uses forms doesn't generate anything like these numbers of requests, which makes me think this isn't normal (As well as the fact this particular form is very slow to open)
    This is a third party application, so i don't have access to the source unfortunately.
    Is there anything we should look at in our setup, or is this likely to be an application coding issue? This app is a recent conversion from a forms 6 client server application (Which itself ran ok, at least this bit of the application did with no delays in navigation between screens).
    I'm happy to go back to the supplier, but it might help if I can point them into some specific directions, plus i'd like to know what's going on too!
    Regards,
    Carl

    Sounds odd. 300 Requests is by far too much. As it was a C/S application: did they do anything else except the recompile on 10g? Moving from C/S to 10g webforms seems to be easy as you just need to recompile but in fact it isn't. There are many things which didn't matter in a C/S environment but have disastrous effects once the form is deployed over the web. The synchronize built in for example. In C/S calls to synchronize wasn't that bad; But when you are using web deployed forms...each call to synchronize is a roundtrip. The usage of timers is also best kept on a low level in webforms for example.
    A good starting point for the whole do's and dont's when moving forms to the web is the forms upgrade center:
    http://www.oracle.com/technetwork/developer-tools/forms/index-095046.html
    If you don't have the source code available that's unfortune; but if you want to know what's happening behind the scenes there is the possibility to trace a forms session:
    http://download.oracle.com/docs/cd/B14099_19/web.1012/b14032/tracing002.htm#i1035515
    maybe this sheds some light upon what's going on.
    cheers

  • Why do I have to use the tab key even more to tab between page elements.

    Firefox versions prior to ver 4 I used the tab key to tab between page elements (form elements, buttons, etc). I upgraded to ver 4 and now when I tab from form element to form element I first see a gray line outlining the element area and then another press of the tab the element becomes active for me to use. I now have to use double the tab keys to move between form elements.

    Hello new_mac_user, see if the next works
    # In the [[Location bar autocomplete|Location bar]], type '''about:config''' and press '''Enter'''. The about:config "''This might void your warranty!''" warning page may appear.
    # Click '''I'll be careful, I promise!''', to continue to the about:config page.
    # in search field type (or copy/paste from here) '''accessibility.tabfocus'''
    # double-click on it and change the value to '''4''' (probably you have 1 the default on mac)
    # click ok, exit firefox and restart it.
    with the above you give focus to links (and linked images) only when you press the tab key.
    see for more info : http://kb.mozillazine.org/Accessibility.tabfocus
    https://developer.mozilla.org/en-US/docs/Mozilla/Preferences/Preference_reference/accessibility.tabfocus
    thank you

  • Tab Between Text Boxes in Pages

    Is there a way to tab between custom floating text boxes in a Custom Template? I've created a form, and don't want my users to have to click on each text box to enter the data.
    Thank you.

    No, but…
    If you can redesign your form to allow using a table to contain the entry boxes, you can use tab or return to move from one cell to the next.
    Regards,
    Barry

  • Slow tabbing between fields

    Hello,
    We have a very complex interactive form with repeating_subforms. We open it binding a large xml file. Tabbing between fields is very slow when we are editing the form.
    We have designed a simple form with one repeating_subform and without scripting. Bindig the same xml file, tabbing between fields is very slow too.
    How can we solve this problem?
    Here are the links to pdf file and to xdp file with the data.
    Thanking you in advance,

    Thank you for answering!
    We are using Livecycle Designer ES4 v 11.0.1 and Acrobat XI pro.

  • Text entry fields not able to tab between 2 fields

    Hi there,
    I have placed 2 text entry fields that are for username & a password, I on publish/preview, I type the username and go to hit the TAB key to move to the password field but nothing happens & cursor does not move to the other field...
    I did try a quick search for this question as I thought it must of happened before to others, but could not find what I needed..the answer ;-)
    Kind Regards
    Rossco
    DOH! I just found some more information on tabbing between these fields, so will check that out fisrt........must be Friday (over here)

    Hi There,
    Welcome to Adobe Forum.
    Have you tried using the shortcut option assigned as "Tab" in the action properties of the text entry box as shown in the following image:
    Thanks
    Loveesh

  • How do I share tabs between my different Firefox installations using the new Firefox Accounts system?

    I am using Firefox Nightly (30.a1, 2014-02-18, x64) on my laptop computer (Windows 8.1 Pro x64) and I was using Firefox Beta on my Nexus 5 (Android 4.4.2). Recently, Mozilla announced the new Firefox Accounts system (which is replacing the old Firefox Sync Account) and I created a Firefox Account for my laptop Nightly installation. Since the new Firefox Account doesn't work with the old Firefox Sync Account, I replaced my Android installation of Firefox Beta with Firefox Nightly and signed into Firefox Account on my Android. However, when I attempt to send a tab from my Android installation to my laptop installation using the "Share to Nightly" intent, Nightly asks me to set up a Sync account, which is impossible to complete in my laptop Nightly installation. I've tried replacing my Android Nightly installation with an Android Aurora installation, but the same problem occurs.
    What's worse is that even with both my laptop and Android installations signed into the same Firefox Account, I cannot see any information being synced between the 2 installations. No history is being shared, and I cannot see the open tabs list from the other device. I cannot pass tabs between my phone and my laptop, which is something I used every week as I visited websites and read my RSS feeds on my phone. Does anyone know how to share tabs using the new Firefox Accounts? Does anyone know why Firefox Accounts does not seem to be syncing data between my 2 installations?

    Unfortunately with further investigation, Roland informed me that share tab was removed[https://bugzilla.mozilla.org/show_bug.cgi?id=965811]

  • Difference between Form & Report Painter

    Hi Experts,
    What is the difference between  Forms and Report painter reports? (My understanding is that Forms for PCA and Report painter for Cost Center).
    Could also any one provide me the like related to SAP Documents to create Report Painter & Forms reports
    Thanks in Advance
    Gowsi

    <b>Form painter</b> is a term used in SAP Smart form context
    http://help.sap.com/saphelp_nw2004s/helpdata/en/4b/83fb48df8f11d3969700a0c930660b/content.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/4b/83fb42df8f11d3969700a0c930660b/content.htm
    http://www.thespot4sap.com/articles/Code_CostCentreReport.asp
    <b>Report painter</b>
    A tool for creating reports that meet specific business and reporting requirements.
    The Report Painter enables you to report on data from various applications. It uses a graphical report structure that forms the basis for the report definition. When defining the report, you work with a structure that corresponds to the final structure of the report when the report data is output.
    The SAP System is delivered with several row and column models that can be used as building blocks to help you create reports quickly and simply.
    http://help.sap.com/saphelp_47x200/helpdata/en/66/bc7dc143c211d182b30000e829fbfe/frameset.htm
    http://help.sap.com/saphelp_47x200/helpdata/en/66/bc7dc143c211d182b30000e829fbfe/frameset.htm
    Regards
    Vivek
    *Assign points for all the useful answers

  • Actions tab for form field properties

    This question was posted in response to the following article: http://help.adobe.com/en_US/acrobat/pro/using/WSDFC888F9-219C-4b55-90E6-D316E2A85F08.w.htm l

    I am working in Acrobat. I trying to create a form dealers will complete and submit. There will be no licensing issues. I have created a button and named it SUBMIT. In the Actions tab I have selected “Submit a form.” I have entered “mailto:[email protected]” under “Enter a URL for this link”. I have also selected “PDF The complete document” as the Export Format.
    I saved the file but when I go to the Preview Mode and click the new “Submit” button, I am asked to “Save PDF as” from a menu. Even if I rename the file and click save, nothing happens. I am back in the Preview mode. If I click “Submit” again, I get the same “Save PDF as” routine.
    I am baffled.
      Lloyd Doolittle
    Re:  Actions tab for form field properties
    [Personal information deleted]

  • When alt + tab between applications firefox freezes to a black blank screen and will not move. The only response it will allow is the close option after right clicking on the task bar in English

    I normally have several applications running at the same time, some of them are running 24/7/365.
    When accessing the applications its easier to alt+tab between them. On the occasions that I can actually get Firefox to open and stay open it always freezes and remains immovable on the screen after switching to another program.
    Firefox goes black except for the border and the close button at the top right. The other buttons disappear. Even after waiting for a period of time it does not clear.
    The freeze can occur either on the first switch or second switch. However, it always happens.

    Have also since found out that to start FF4 in safe mode you just hold shift whilst double-clicking the icon. We only find these things out after the event, murphy's law!

  • Tabbing through form fields in app doesn't work in Firefox.

    Is there a setting in Firefox that permits tabbing through form fields so that one doesn't have to use the mouse? This works fine in IE. for the same app without any configuration, but not in Firefox.

    Are you really still running Firefox 3.6? Since it hasn't received any security updates for nine months, you may be putting yourself at risk.
    In my experience, tabbing through forms works just fine. Have you tested in Firefox's Safe Mode to see whether the problem is caused by a custom setting or add-on.
    First, I recommend backing up your Firefox settings in case something goes wrong. See [https://support.mozilla.org/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
    Next, restart Firefox in [http://support.mozilla.org/kb/Safe+Mode Safe Mode] by holding the Shift key when you double-click the program icon.
    In the Safe Mode dialog, do not check any boxes, just click "Continue in Safe Mode."
    If tabbing works correctly, this points to an add-on or custom setting as the most likely cause of the problem.

  • Command-tab between Safari and another application

    When I command-tab between Safari and another application such as Word, when I return to Safari I am on a different web page.  When I use History to return to the page I want, I have to sign back in again.  How can I fix this?

    It's CS4 6.0.3 on OSX.
    The other application is a web app in development.
    My guess now is Flash compiles the fonts and it sees Antihistory regular as Antihistory book and our website is expecting regular.

  • Error in the  import tab of form interface with parameter name

    Hi Experts,
                    in the import tab of form interface i have define the following..
              Parameter Name               type assignment                  Associated Type
             t_vbrk                                    type                                         vbrk
    and then in a loop i am using this as follows...
    t_vbrl into fs_vbrk
    after executing check i am getting the error 'T_VBRK" is neither specified under "TABLES" nor defined as an internal table.'
    plz help me out with this.....
    why this error is occuring?
    thnks n reagrds,
    Ashmita

    Hi,
    U cannot loop the import tab i think....Give tat one in tables statement and execute..
    t_vbrk type vbrk in Tables tab...
    I think it will solve ur issue..

  • Oracle forms display bright white flash when transitioning between forms.

    We recently migrated an application from Oracle Application Server to WebLogic and we are noticing that in the WebLogic environment while transitioning between forms there is a quick bright white flash that has caused several complaints. We are not sure if this is related to a performance issue which may be preventing the form from painting quick enough or if there is a configuration problem somewhere. Has anyone else seen this behavior?
    We are running WebLogic Server Version 10.3, Fusion Middleware 11gR1, and Oracle DB 11.2

    Unfortunately we don't have any errors to work off of. The application works fine, it's just that their is a very short delay when transitioning from one form to another and during that transition the whole form turns bright white which has caused users to complain that it could cause an epileptic seizure. I assumed maybe there was some performance tuning/caching that could be done to make it so it loaded quicker. Our DBA team recieved a response from Oracle support stating that although the forms themselves are relatively unchanged, due to the underlying software changes in 11g we are to expect some differences compared to previous versions. We have since set background in formsweb.cfg to use a light grey image which seems to be more acceptable for our users.
    Edited by: user4597705 on Oct 12, 2012 1:18 PM

Maybe you are looking for

  • When is the next firmware released after v21.0.016...

    When is the next FW upgrade after V21.0.016 which hav known bugs reported . I hope nokia to rectify it in next FW near soon.....My N95-1 getting slower & slower in response...when boot up it takes 15 minutes, some phone pre-installed function like No

  • Problems syncing Airtunes over multiple Airport Express speakers

    I've recently purchased a second Airport Express to allow me to stream music over airtunes to two rooms in the house at the same time. However, the music doesn't synchronise - there is a noticeable latency between the two sets of speakers so it sound

  • Alternate material in BOM

    Can we use any material as a alternate material in BOM

  • Acrobat X Pro becoming unresponsive

    About 2 months ago, I got a new laptop and used the Migration Assistant to transfer all of my files and apps from the older MacBook Pro running OS10.6 to the new MacBook Pro running OS10.8.  Everything was working well until about a week ago when my

  • Remove "Game Center" app

    Does not show in iTunes.. I'm sure i downloaded it.. How can i remove it???? thanks, Del