Table does not fit into window.

Hi Guys,
When I execute the Smartforms I get this message ? '
"Table does not fit into window." any guess why this message ?
Regards

>
P R Raghu wrote:
> "Table does not fit into window." any guess why this message ?
> Regards
If TABLE does not fit WINDOW try to take it through the DOOR LOL
Doesn't the error seems self explanatory to you?
Regards
Karthik D

Similar Messages

Error: Table TEMPLATE_HEADER does not fit into window.

Hello Experts ,
I met a very strange problem.
I am printing a process order using smartform.
for other process nrs , print perfect.
But only for a certain precess nr, I got a popup error 'Table TEMPLATE_HEADER does not fit into window.'
At beginning , I suppose my table line extend the mainwindow width. But infact , no!
I try to comment every node one by one, I found the reason: I put a table line into a loop node, if I add a text node which has something inside, it will triger this error. (only for this process order, others works fine)
so , does someone met this error before ?
Please help me!!
Regards
Kevin

Hi Kevin,
Which printer and device type do you use? For line printers and device type(driver STN2) like e.g. EPESCP9, the SAP system
must use spaces and empty lines to place the text. This is a limitation of the ESC/P printer languagesa per SAP note #19807.
For this, the Smartforms rounds all coordinates(of the table cells and the window). Only after this step it checks, whether the table fits into the window. So if the table size is quite close to the window size size, it may happen on line printers that the table doesn't fit anymore.
If this is the reason for your problem, the error message should vanish if you increase the size of the window containing table TEMPLATE_HEADER a little in your smartform.
Regards,
Aidan

Getting "Table %TEMPLATE does not fit into window" error

Hello,
I am trying to print a form to an old EPSON DFX-9000 dot matrix printer and am getting the error message Table %TEMPLATE does not fit into window".
This only happens when I go to that printer. I can print fine to a laser printer.
I have tried creating a new device type and copying over the format from the laser printer, playing with the format, changing formats, ect.
I have adjusted the size of the window that my template cannot allegedly fit into but still no luck. I have checked the height and width of the template and the window many, many times and still get the same error.
Has anyone seen this before? Please help. Thanks.

Hi James,
You need to see the width and height of the Page Format which you have set in Form Attributes of your smartforms.
What ever you create should be within this width and height .
So accordingly adjust the width and height of your windows and components within them
Regards,
Dep

Table TEMPL_FW6 does not fit into window.

Hello All,
My smartform driver program is giving me this error. What could be the problem .can anyone help me out in this.

Hii
this error u can get it in smartform itself
change the width of ur template & when u specifying the text check the line types
any of them ur missing
reward points if useful
regards
Jaipal

Table does not fit into JScrollPane...

Hello,
I created a JTable and want to put this table into a JScrollPane, because the table is larger than the screen-size. The problem is that I never get the horizontal ScrollBar displayed, and the columns of my table are pressed together.
Just try yourself, here's a piece of my source code:
JTable table = new JTable(100,100);
JScrollPane pane = new JScrollPane(table);
I tried different constructor-versions of the JScrollPane-object, but the result was always the same: very very small columns and no horizontal ScrollBar.
Who can tell me how to do so...? I'd be very pleased about any kind of
advision because this problem really drives me crazy...
Thanx, Findus

Hi,
The reason that the horizontal scrollbar is not appearing is because you have the columns as resizeable. By default the column are automatically resizeable. You have to switch off the resizing.
The code should be something like this (an example)
import javax.swing.JFrame;
import javax.swing.JTable;
import javax.swing.JScrollPane;
public class MyFrame extends JFrame {
private JTable table = null;
public MyFrame() {
try{
GUI();
catch(Exception ex) {
ex.printStackTrace();
private void GUI() throws Exception {
table = new JTable(100, 100);
table.setAutoResizeMode(JTable.AUTO_RESIZE_OFF);
this.getContentPane().add(new JScrollPane(table);
this.setDefaultCloseOperation(JFrame.DISPOSE_ON_CLOSE);
this.setSize(400, 400);
this.setVisible(true);
public static void main(String[] args) {
MyFrame app = new MyFrame();
I hope this helps

Window does not fit into page

Hi all,
I'm creating a smartform which prints one internal table consists of 36 fields. In table line type i have mentioned the 36 fields. First four are of 4CM and other 32 fields of 2CM width. So in total i have mentioned as 80 CM.
But its showing an error like 'Main window does not fit into Page'.
What could be the mistake?
Can anyone help me in this..
Regards,
Shanthi

Hi,
U have to adjust the 36 fields into 21 cm by Allocating Space accordingly.
if Your Space is small then data will be displayed in the next line.
And display The data in Smallest font possible.
Regards
sandipan

Template does not fit into the window

Hello all,
<b>Template does not fit into the window (Message no. SSFCOMPOSER173)</b>
I am getting the above error in when i try to preview my smartform.
The template is in footer window. I have only 3 lines in the template.
And the size of template is less than window size.
I do not understand why this error. This happened when there are many line items in the main window. With less no. of line items it worked well.
If you have any suggestions Please help.
Thanks.

Hi,
Please check the following points:
1. Font size and font family.
2. Line spacing
3. Allignment.
4. Left and right margin
Deserve Rewards.
regards.

I recently bought a Macbook Air and a Thunderbolt Display and the laptop's power is supposed to come from the display, but the power cable on the display does not fit into the Macbook Air.

I recently bought a 11" Macbook Air and a 27" Thunderbolt Display.The laptop's power is supposed to come from the display when connected, but the power cable on the display does not fit into the Macbook Air.

If your MBair is a 2012 model, it has a Magsafe 2 power connection. The monitor probably has the old magsafe connection. If this is the case, you need this adapter.
http://store.apple.com/us/product/MD504ZM/A?fnode=5a

Transportation error - SIPT_INSERT_FI (SIPT_DATA|11) does not fit into the existing function group ((SIPT_DATA_FI|02))

While performing a system maintenance task we came across this Transportation error - SIPT_INSERT_FI (SIPT_DATA|11) does not fit into the existing function group ((SIPT_DATA_FI|02))
Can someone help us in resolving this
Thanks and regards
RS

Please expand the log also please check the SAP note 1835436
Regards
Aneesh

Movie does not fit preview window

Sorry if this is a dumb question, but I cannot figure it out.
I made a short movie clip with my iPhone 5. Imported it into iMovie (it looks perfect when I preview it from the event library) and then dragged that clip to a new project. Then when I play the video from within the project, it has been heavily cropped, ie the movie does not fit in the preview window.
I have tried changing the aspect ratio of the project and this made no difference. I also change the setting File > Project Properties > Initial Video Placement to Fit in Frame.
Any help appreciated.

A lot of people who shoot video on the iPhone will hold the phone vertically oriented (portrait orientation). For shooting movies, you will get the best results when you rotate the phone 90 degrees to landscape orientation.
iMovie will always edit in landscape orientation (long side on top and bottom, short side on the sides) because this is the way TV screens work.

In Rtf Template ,table is not fit with window after hide columns

Hi,
In my RTF template i have table with 5 columns in that 3 colums will display based on condition. During runtime it showing correctly with 5 columns i.e fit to window.
suppose if any of column is not displayed(hide) and table is shrinking and not fit with window.
Tried with following option in word doc:
Right click on table and select Auto Fit--> Auto fit to window. but didn't work. Please let me know is any options to make table to fit with window.
Thanks..
Edited by: user9530489 on May 3, 2011 1:09 PM

Hi,
I've changed the output device in order to test with the LP01 printer.
This device is not active in SPAD but if i setup my action with this device I can preview the smartform. It is not possible to preview the smartform with the printer that I'd like to use.
Any ideas?
Thanks in advance,
Stephanie

X102e - Hard drive does not boot into Windows

Hi, I was trying to reinstall Windows on my X120e.
I tried clean install with Windows 7 Professional, but the hard drive does not boot into the Windows once it has done the first phase of the install(you know, the copying part)
After the restart done by Windows, it goes as far as "Starting Windows" but does not actually boot into the Windows.
When I try to install Windows with another HDD, the device works well, but I can't swap the HDD because it is not 7.5mm think HDD.
Is there any possibility the HDD will work trough any software-level process? The HDD works fine as external HDD when tested with external HDD adapter, and installs well. only problem is that it fails to boot
Kim
W540( ), Helix(Sold), Tablet 2(Sold) Tablet 2( ), X120e(Sold), X201 Tablet, X41 Tablet(Sold), X41, X32*4, 701C*4

Thank you for reply.
This is not exactly the issue. I was talking about the HDD originally installed in the PC.
The PC successfully recognizes the external disk I used to install the Windows, but the problem was that I did not boot into the "First boot" screen, which basically works on the already installed data.
As of now I have installed an SSD and is working fine. strange part is that HDD works just fine when I use it as an external HDD via adapter. Strange huh?
Kim
W540( ), Helix(Sold), Tablet 2(Sold) Tablet 2( ), X120e(Sold), X201 Tablet, X41 Tablet(Sold), X41, X32*4, 701C*4

Datagrid Scrolling Problem.. Does not fit into Parent Container..

Hi All,
I have a module and module contains only one datagrid. I am adding this module to tab navigator dynamically in the next index. I am using Text as Item renderer in the datagrid and the row height will change depending upon the data diplyed on the Text. When the data populate in datagrid the datagrid going beyond the containers layout. i.e height is not fit into parent container. I am using Canvas as parent container .. Please find the below attached pictures and you will get to know what is my problem?
Please help me to get out from this issue.. It is urgent..

Thanks for quick reply
Here I am adding this module to canvas and the canvas is also dynamic . As you said "customize the measure() method in Text control and return the correct measuredHeight based on the explicitWidth." what is the relation between Text control height and datagrid? Datagird should take it's parent container width and heights. I am newbie to this Flex.. can you please explain it briefly. And if you have any Other way to do this please tell me .. it is very helpful to me.. Can you please post cusomized measure method if possible. please

3.3V CardBus Card does not fit into T500?

I got a new T500 2055WVJ last week with Win 7 64bit.
I have only one problem. The cardbus slot (it must be one, because the device manager says RICOH compatible CardBus controller) does not like my Adaptec SCSI CardBus card (Type II). Other PCMCIA cards (5V, non Cardbus) in the same slot fit in perfectly, but the 3.3V SCSI card goes in but stops about 5 mm before they is completely in. The same card works in all other laptops including my old T60, where is slides in and is recognized perfectly. Also CompactFlash cards inside an PCMCIA adaptor fit in perfectly on my new T500 and appear as ATA devices.
Looking into the slot with a lamp shows that on the left side, the notch for differentiating between 5V and 3.3V cards only allows 5V cards. But the CardBus spec says, that Cardbus cards must be 3.3V. You can see a picture of the difference between cardbus and pcmcia pccards here: http://de.wikipedia.org/w/index.php?title=DateiCCard_CardBus.jpg&filetimestamp=20061112220451 (you see the different notch on the right side).
So whats wrong here? Does the new Thinkpad really does not like 3.3V CardBus cards, although the controller is CardBus?
Solved!
Go to Solution.

Congrats on getting it to work!
Thinking back, I remember how reluctant I was to force a card into my new T500. I do think there is something slightly off about the slot, because the same card had been working fine in my old T42. (Or maybe the T42 was similarly stiff when it was new way back when?)
Anyway, congrats again!
Results of Your Ideal Business-Class Laptop survey, concluded 2009-07-29.
Did someone help you?
Say thanks! with a kudo.
Even better: Pay it forward, help someone else.

Video does not fit canvas window

Hello All,
When I import a clip to the timeline, it shows in my canvas with a black border. How do I make this fit the window? I do not want a border around it when I play it on DVD. Please help!?!!??

You need to have Image+Wireframe ON to grab a drag point (little squares at each corner) to re-size to full screen.
Ensure the Viewer and Canvas are set to "Fit to Window" before starting.
Double click the small clip in the Timeline, it opens in the Viewer.
Place the playhead over the Timeline clip.
When you scale the clip in the Viewer you will see it update in the Canvas.
This way you see waht you will get straight away.
Al

Table does not fit into window.

Similar Messages

Maybe you are looking for