Table fields(R/3) move to sap bw

Table fields are avaialble in R/3 side.i have to use those fields in BW SIDE.
can any one tell me How to use those felds in bw side. and which extractors will I use?
Please explain me whole way.

Hi,
Table fields are avaialble in R/3 side.i have to use those fields in BW SIDE. can any one tell me How to use those felds in bw side. and which extractors will I use?
Steps:
1. Create a DataSource in ECC using RSO2 and select table and give the table.
2. Save and Activate the DataSource.
3. Then Replicate the DataSurce in BW.
4. Create mapping susing Transformations in BW i.e InfoObejct and Fields mapping.
5. Create Cube/DSO and tyhen connect it to DataSource Via InfoSource.
6. Create InfoPackage and Extarct the Data till PSA using InfoPackage
7. Create DTP and then exeucte it to load data from PSA to Cube/DSO.
Thanks
Reddy

Similar Messages

Want to know table field in lower version of SAP?

Hi,
Could any one tell me is the field UCCHECK is available in table TRDIR in lower versions of SAP like 4.0, 4.5, 4.6 and below 4.7.
Thanks,
Kumar

hi,
Field UCCHECK is not available in TRDIR table in 3.1H version.
UCCHECK is flag that says whether unicode check is done for that particular program or not.
Unicode concept has come into existence from version 4.6 , i suppose.
Regards,
Sailaja
Dont forget to reward points, if answer helps you.
Message was edited by: Sailaja N.L.

Creating a new Search Help on a standard SAP table field?

Good day, everyone!
As part of a report I am writing, the customer would like to have Search Help added to the AUFEX field in table AUFK. They would like this functionality so that when they are changing an order via t-code ko02, they can get a list of valid values to put in field AUFEX. I would like to tie it to a zTable I've created; in my zTable, I have just 2 fields: a key value (that will go into AUFEX) and a text description of the key value. This zTable is used in my report.
While I've created a Search Help on this table already for table maintenance, I've never added a custom Search Help to an existing standard SAP table field before. I've done some Googling and other searching to see what I need to know, but I've only been able to find information on Collective Search Helps. AUFEX doesn't yet have a Search Help field, so I don't think Collective Search Helps is my answer.
Is this possible? Can I add a custom Search Help to a standard SAP table field that doesn't have any Search Help linked to it yet? Is there an existing thread or guide somewhere that can tell me how to do this?
Thank you!

Hi
Yes u can: u can assign the search help to (A) data element livel or (B) field table livel.
After creating your search help:
A) Run SE11, insert your data element (AUFEX), press edit and insert the search help in "Search Help" area on DEFINATION tab;
B) Run SE11, insert your table (AUFK), press edit, place the cursor on your field (AUFEX) and go to GoTo->Search help->for field
But u should consider it'll mean to change a standard object for both cases: so u need to get the access key from your OSS.
Max

Are Output of reports generated stored in tables & fields in SAP?

Hi,
If a report is generated or if a scheduled job is executed, is the output stored in SAP tables & fields or just displayed on the screen.
Thank You...
Nag.

Hi Rajesh,
You are right that, If posting happens, obviously the data is going to be stored in tables.
I am not talking about posting. I want to know if the job is scheduled for report generation (where there is no posting involved) whether the result is stored in tables or not. After executing SM37, we will select the job and click Spool right. I am talking about the report result stored there.
waiting for your reply...
Thank you,
Nag

Info. / Doc. on Changes to Standard SAP Program, Tables, Fields in SAP 6.0

We are in the process of upgrading our SAP from 4.6c to 6.0 and I am looking for a document or white paper that summarizes changes to Standard SAP Programs, Tables/Fields, Function Modules etc.. from what used to be in SAP 4.6c to what it is in SAP 6.0. I am not sure if such a comprehensive document exists or is posted in the forum.
Any help or information in this regard will be highly appreciated.
Thanks
ram

Hi Ram,
<< We are in the process of doing our technical upgrade from SAP 4.6c to 6.0. I am looking for a white paper or documentation listing the changes made to the standard SAP Programs, Tables, Fields, Function Modules etc. from Rel. 4.6c to 6.0. >>
Do you want to know what custom changes were done to SAP standard objects in your system or do you want to know what changes SAP did from 4.6c to ECC6.0.
There is no white paper or documentation to find out custom changes made to SAP standard objects. but there were many tools in the market to find out and tell what changes were done to sap standard objects in your system.
Your question seems ambiguous please clear it.
Thanks,
Kiran.

New table / field in SAP MDM not being reflected in SAP EP

Hi,
I have added a lookup- flat table in MDM and added a field corresponding to this table in my main Products table.
I have maintained data in both the main table and the look up table thru Data manager
Problem:
I want to populate this field through the SAP EP. I am using std MDM iView Details template. When I check the drop down to select the table, I see only the ones which had come with the MDM std business content. The added tables/ fields are not visible on the portal to select :(.
Can you help me out Please? Are there some settings that need to be done?
Regards,
Alpana

As a mandatory requirement after completing the deployment process, the Web Application Server should be restarted for the changes made by the deployment to take effect and appear in the Portal.
Have you restarted Web Application Server after deployment?
Also check, User Mapping for the Connected MDM System
Search for the User (Portal User) which needs to be mapped to the appropriate MDM User.
It is quite interesting that you are getting all other tables in std i-view template except newly added.
It could be also because you have already there connection of EP with MDM before that table and new field exists in MDM.
And it is showing same existing table and fields, I mean not reflected now newly added table and field. I would suggest you to create the MDM connection with EP from scratch. Just give MDM System Name and ID, MDM Server, Repository, Language, Creating an Alias for the connected MDM System, User Mapping and connection Test for the Connected MDM System.
May be it result in reflecting newly added Table and field which is not visible in EP as of now. Just give it a try.
Hope it helps...
Thanks and Regards,
Mandeep Saini

Get Table fields name for an SAP table

hi,
i need to pass SAP table name as a parameter to the selection screen of a Report program.
This prog shud give me the table Fields name along with type and length.
Is there any standard SAP report program for the same or i have to write my own logic?
Please advise.
regards,
ags.

Hi,
For your requirement you have to write own program in dynamic manner by using field symbol concept.
Use this FM DDIF_FIELDINFO_GET and get the field information of database table.
call function 'DDIF_FIELDINFO_GET'
 exporting
 tabname = <master> u201C Table name
 Tables
 DFIES_TAB = <table_field> u201C here you will get field information of table
 exceptions
 not_found = 1
 internal_error = 2
 others = 3.
if sy-subrc <> 0.
 message text-005 type 'E' .
endif.
Loop <table_field> assignigng <field>
*---here you have to collect the relevant information that you are going to display in your output.
Endloop.
Use any one of ALV or OOALV and display your records.
Regards,
Peranandam

IDoc field and SAP Table field

I want to find out which SAP table field is populating the given IDoc segment without getting into ABAP code? Do we have something like "Where-used" list? On the reverse side, If I want to know which SAP Table field the incoming IDoc segement is posting to, how do I do that? Thanks in advance.

Hi,
This is very difficult without going into the ABAP code. Some time it is easy like if you see IDOC MATMAS05
Segment E1MARAM = MARA
Segment E1MAKTM = MAKT
Segment E1MARCM = MARC
etc.... also you can judge from the name of a segment.
Thanks,
Mandar

Dynamic table field for filtering a selection criteria

Hi Friends
I am using a table a981 and fetching data in internal table but the table has a fieil Country whose technical name is ALAND in dev and LAND1 in production.Now i cannot use LAND1 as it wont let me to activate the report and if i use ALAND i cannot move the request to production as it fails. So how can i achive dynamic table field in the select query based on server.My query is-
    select kschl
           wkreg
           matnr
           knumh
   from a981 into corresponding fields of table it_a981
   for all entries in it_marc where matnr = it_marc-matnr
                                and kschl in ('MWST','ZSER')
                                and aland = 'IN'
                                and datab le sy-datum
                                and datbi ge sy-datum.
I need to make aland dynamic.Pls suggest

Hi,
this forum is for the BusinessObjects Integration Kit for SAP but I don't see how you entry is related to it.
Ingo

Why is there NO Search Help for Table-Field T056U-VZSKZ?

Hi Experts,
A blessed day.
Table-field T056U-VZSKZ (Control table for calculation of interest on arrears-Interest calculation indicator or account number) is being used in a screen-field of a standard transaction in SAP (Account Determination: Posting Specifications). However, this Table-Field T056U-VZSKZ does not have a search-help which is needed for the transaction. I've looked for an OSS note for this, but to no avail. Is there a reason why Table-Field T056U-VZSKZ does not have a search-help?
Thanks so much.
Regards,
JO

The music store is part of iTunes. That is why they are together on the menu. As many topics would offer the same advice for music in your library or music in the store, grouping them together makes sense in terms of reducing redundant entries.
Sorry you found it confusing. I, too, once found some things Apple a bit different. That was about two years ago when I bought my iBook. StarDeb is another recent switcher. And I feel confident in saying this: either of us would be more than happy to help you with anything that gets "lost in translation". We both know there is a learning curve when you move from the XP world to a more fruit-based view of things

How to know the table field for RMCLM- ANZRE

Hi experts,
I need to know table for structure field RMCLM - ANZRE.
In CL02, it indicates 'display relavent' for character.
Thanks in advance.
zak.

CABN-ATVIE. (look at OSS [Note 488831 - Relevance fields are missing|https://service.sap.com/sap/support/notes/488831] found by keyword ANZRE, in the correction you will find the "move")
Regards

F110 - Grouping the vendor invoices by BSEG table fields

Hi,
I want to group the vendor invoices while making the payment through F110, based on a BSEG table field. The settings in Grouping Key configuration (OBAP) only allows me to choose the fileds from BSIK table and not possible to select the fields from BSEG table. Is there any other way to group the vendor invoices based on BSEG fileds? How can we achieve this requirement in SAP?
Thanks and Regards
Koteswararao padarti

Hi,
I created the substitution and also grouping key based on the BSIK-KIDNO filed. But the system is not able to group the vendor invoices by payment reference. I already tried the following options
Seperate Payments for each Ref in FBZP settings
Can anyone let me know what is missing in the configuration to group the invoices for payment by payment reference.
Regards
Koteswararao Padarti

Connection between Structure Field and Table Field

Hello everybody,
I'm trying to find a connection between a field in the structure and the actual filed in the table of the database. For example in the structure CAUFVD you have the field PLNNR. This information is stored in the table AFFL in the field PLNNR.
In the transaction SE84 you can display a structure with all it's fields but I don't see anywhere from which table and field the information is gathered.
Can you please help me in finding the connection between the structure field and the table field in the database in which the displayed information is stored?
Thanks and best regards,
CALIN Marius-Bogdan
SAP - PP-KeyUser

Double-click on the structure field and you can do a where-used to find the codepoints, interface usage, etc. You might find it that way. You could also look at the flow logic of your screen and try to trace it back. Otherwise, you'd have to use watchpoints, the debugger, runtime analysis or various other developer tools to find the data population. If you are a user and not a developer as your signature indicates, you might need to find a developer for this. Sometimes, it can be incredibly frustrating with SAP because the data field will be handed off 4 or 5 times before it actually reaches its destination field. Unfortunately, I haven't worked with PP in at least 10 years so I can't give you a better answer; maybe someone else can.

How to use table field values as dynamic parameters on selection screen

Hi,
I need help on dynamic selection parameters.
I need to display no. of parameters from the fields of a database table.
Basically i want to pass field values of a table to selection screen and we can use those values as parameter on selection screen.
If there are 10 entries in a table field( say field is field_name and entries are bukrs,kunnr etc.)
I need to display as many parameters on screen as many values are there in field_name( In this case it is 10)
SELECTION-SCREEN: BEGIN OF BLOCK b2 WITH FRAME TITLE text-t02.
PARAMETERS:
p_bukrs(5) ,
p_kunnr(5) ,
SELECTION-SCREEN END OF BLOCK b2.
Thanx

Hi,
You can create it using Dynamic Program.Check this link below.
[Creating Dynamic Programs|http://help.sap.com/saphelp_46c/helpdata/en/9f/db996135c111d1829f0000e829fbfe/content.htm]
Hope this might help you.
Thanks,
Prashanth

Help with writing and retrieving data from a table field with type "LCHR"

Hi Experts,
I need help with writing and reading data from a database table field which has a type of "LCHR". I have given an example of the original code but don't know what to change it to in order to fix it and still read in the original data that's stored in the LCHR field.
Basically we have two Function modules, one that saves list data to a database table and one that reads in this data. Both Function modules have an identicle table which has an array of fields from type INT4, CHAR, and type P. The INT4 field is the first one.
Incidentally this worked in the 4.7 non-unicode system but is now dumping in the new ECC6 Unicode system.
Thanks in advance,
C
SAVING THE LIST DATA TO DB
DATA: L_WA(800).
LOOP AT T_TAB into L_WA.
ZDBTAB-DATALEN = STRLEN( L_WA ).
MOVE: L_WA to ZDBTAB-RAWDATA.
ZDBTAB-LINENUM = SY-TABIX.
INSERT ZDBTAB.
READING THE DATA FROM DB
DATA: BEGIN OF T_DATA,
             SEQNR type ZDBTAB-LINENUM,
             DATA type ZDBTAB-RAWDATA,
           END OF T_TAB.
Select the data.
SELECT linenum rawdata from ZDBTAB into table T_DATA
     WHERE repid = w_repname
     AND rundate = w_rundate
     ORDER BY linenum.
Populate calling Internal Table.
LOOP AT T-DATA.
APPEND T_DATA to T_TAB.
ENDLOOP.

Hi Anuj,
The unicode flag is active.
When I run our report and then to try and save the list data a dump is happening at the following point
LOOP AT T_TAB into L_WA.
As I say, T_TAB consists of different fields and field types whereas L_WA is CHAR 800. The dump mentions UC_OBJECTS_NOT_CONVERTIBLE
When I try to load a saved list the dump is happening at the following point
APPEND T_DATA-RAWDATA to T_TAB.
T_DATA-RAWDATA is type LCHR and T_TAB consists of different fields and field types.
In both examples the dumps mention UC_OBJECTS_NOT_CONVERTIBLE
Regards
C

Table fields(R/3) move to sap bw

Similar Messages

Maybe you are looking for