Table for GR Blocked Stock
Hi
I wanted to know the table for GR Blocked stock.
Is there any table except MSEG / EKBE, from which I can get the GR Blocked stock entry details???
Thanks
Nilesh
Hello ,
1 They can be listed with all purchase order list displays like ME2M and ME2L and M2N
You have to use selection parameter WE104
2 GO to Se16n and give EKBE
Similar Messages
-
Which table is GR Blocked Stock saved in ?
hi:
when i do gr with movement type 107, can anyone tell me which table is GR Blocked Stock saved in ?
thanks in advance..
Monsonif i do gr with 107, then you can see the GR Blocked Stock with MMBE, I want to know which table is GR Blocked Stock saved in , not material document. thanks ..if there is no directly table, can anyone tell me how to calculate it ?
-
Table storing GR Block stock value
dear experts,
I want to create a z report where i want to bring the value of GR block stock.
Currently it is following structure.
RMMMBESTN_DATEN
Struct.
WESPB
WESPB2
Is this value available in any other table from where i can bring this value.
Or any any method to report this.
Regards
SCSharmaHi There
As per the STD SAP, GR blocked stock is a Non valuated stock, so at the time of receipt in to GR Blocked, only the material doc will be created and not the Accounting document,, Means that system itself it is not valuated and the PO qty will remain open (open order Qty will not be redcuced)
So i think you can get the price from PO and Multiply with the qty for your report that would be only solution as you can not the value for this qty from the system,,,
Hope it helps,,,,
Thanks
Senthil -
Hi Everyone!
May I ask if there's any other report aside from MMBE that can display the list of Materials that are currently in GR Blocked Stocks? (received using Movement Type 103)
Thanks a lot!Hi........
You have more than 4 t code for the same
1) me2l selection parameter WE104
2) me2m selection parameter WE104
3) mmbe
4) mb51 mov type 103
Regards,
Neha -
URGENT: REGARDING TABLE FOR SALES ORDER STOCK
Hi,
I making a report in which i have to display the material's minimum ,maximum and reorder point levels and its stock level too.
but 1 problem i am facing is that if the stock is present in the sales order theni have to use the MSKA table but it contains different fields such as :-
1.) Unrestricted stock
2.) Block Stock
3.) Quality stock
I want to know that table which stoers the sum of all the values given above.
plzz help me out how to solve this problem.it is really urgent to me as i have to complete the report right now.Hello,
I think you have to sum up all the values (You can request the requirement from functionals) also you can always cross check with transaction MB52. -
Table for following the Stock Tracking in queries
hello,
I am trying to generate a query based on the stock taking module (under Inventory Transactions).
the form takes its values from different tables, but i would like to you the 'counted' column in a query.
a similar form is the price list and for price list there are tables ITM1 etc..
is there any table to take the 'counted' values from?
i'll be thankful for any help
SaarHi Jitin.
thanks for the reply.
i checked the IQR1 but it seems to be a table for inventory posting after reconciliation.
can you guide me how to find the object type of inventory tracking (a step before)?
regards
Saar -
Hi, Abap Experts,
I have to make a batch wise back dated stock report.
Can any one help me to give name of stocks table for required query.
Any help will be appresiable.
Regards
Rajiv singh.Hi Rajiv,
Stock as per storage location is stored in MARD table and for batch related stocks we have the table MCHB.
However, for history we also have history tables for each of these, viz.
MARDH for Storage Location History and
MCHBH for Batch Stock History
Cheers,
Aditya -
Field & Table for picking Block Qty
Hi,
Kindly provide details on how to pick up Blocked Quantity with material document as reference
From which Table & Field.Hi...
MKPF:
MJAHR -- Material Doc Number
INSMK -- Stock Type (Check for Blocked Status)
MENGE -- Quantity
Thanks,
Naveen Inuganti -
Tables for delivery and stock transport orders
Hi Members,
I have a requirement where i have to display (in a report output) a requirement quantity of deliveries and stock transport orders which are displayed in MD04 transaction for particular material and plant.
I don't know which tables these quantities sit into.
If you know please help.
Points will be suitably rewarded.
Reagrds,
Boby>
Boby wrote:
> Hi Members,
>
> I have a requirement where i have to display (in a report output) a requirement quantity of deliveries and stock transport orders which are displayed in MD04 transaction for particular material and plant.
> I don't know which tables these quantities sit into.
> If you know please help.
> Points will be suitably rewarded.
>
> Reagrds,
> Boby
if you only have to display deliveries and stock transport orders you can take LIKP and LIPS for the deliveries and LTAK and LTAP for transport orders.
for all the other elements displayed by MD04 we would have to know about your setup: are you using dispo-areas (which would populate tables MDMA ...) so in that case please provide more information. -
Field and table for Credit block
Hi All,
I want to know which tabl and field gets updated when a sales document is blocked for credit.
the requirement is we want a report which show the list of sales orders along with the credit block status
thanks in advance.
hariniHi Harini,
You u can get the Overall Credit Status from the Table "VBUK" (Header Status and Administrative Data) in the Field "CMGST" with below mentioned values and Description.
Blank - Credit check was not executed/Status not set
A - Credit check was executed, document OK
B - Credit check was executed, document not OK
C - Credit check was executed, document not OK, partial release
D - Document released by credit representative
Hope it will help..
Regrds,
HP -
Table for delivery block status
Hi,
Which table can I find the status of the delivery that is block due to legal control ? (e.g. license not found).
I cannot find it in VBUP nor JEST.
We want to make a report to show what deliveries are block due to legal control.
Thanks!If this info you are seeking for GTS. As I know these info is not stored in ECC table.
In addition to that why are you creating a custom report for this, when you have standard reports available in ECC. Check following TCode /SAPSLL/BL_DOC_SD_R3 - GTS: LCE: Blocked SD Documents or Program(SE38) /SAPSLL/BLOCKED_DOCS_SD_R3 in ECC.
Thanks, JP -
Table for Valuated Project stock
Dear All,
Can any one suggest form which table I can get value of valuated project stock for whole project.
I can get it through table QBEW (Project Stock Valuation), but it gives value for individual WBS only.
Regards,
NitishThanks for your reply.
Basically I am using it in Yreport and initial input parameters are only Project definition and version.
So accordingly how we can built programme, so as to pick value for whole project(all WBS) .
Regards,
Nitish -
Hi All,
I wanted to know which table or tables tell me about which orders are in credit block. I wanted to put this logic in my report table.
My purpose is just wanted to know which sales order are in credit block
cheers
shalsa007.........Hi,
SAP have already reports available for such a purpose. Sales documents can be checked according to their status in VKM1 and VKM4.
If you want to create your own report you can use status table VBUK. I have included a list of all the relevant fields below:
CMPSA Status of static credit limit check
CMPSB Status of dynamic credit limit check in the credit horizon
CMPSC Status of credit check against maximum document value
CMPSD Status of credit check against terms of payment
CMPSE Status of credit check against customer review date
CMPSF Status of credit check against open items due
CMPSG Status of credit check against oldest open items
CMPSH Status of credit check against highest dunning level
CMPSI Status of credit check against financial document
CMPSJ Status of credit check against export credit insurance
CMPSK Status of credit check against payment card authorization
CMPSL Status of credit check of reserves 4
CMPS0 Status of credit check for customer reserve 1
CMPS1 Status of credit check for customer reserve 2
CMPS2 Status of credit check for customer reserve 3
CMGST Overall status of credit checks
I hope this helps.
Thanks,
Gerard -
Table for field unrestricted stock for a material
Hi,
Which table holds the value of unrestricted stock for a material?
Thanks in advance.
Phani.Hi,
Thanks for your replies...
Does the fields suggested by you store the values of warehouse stock?
Regards,
Phani. -
Table for previous period stock
Please provide me the table name or report from which I can get only quality stock in previous monht
I just need the quality stock in previous month
need a tablexxxxH tables certainly have correct data, just not in good readable form.
you need to use a function module to retrieve the previous period stock:
A calculation of previous period data for table MARD could have the following form.
select * from mard into table mard_tab where werks = 'ABCD'.
call function 'MARD_EXTEND'
exporting
xvper = 'X'
tables
mard_tab = mard_tab.
table MARD_TAB is filled with the previous period information.
Maybe you are looking for
-
Hi, The item property is way too big in tabular and I put in the columns attribute a small value, but does not work. What is the problem?
-
i put all my music on my iphone and then when i got my new computer and downloaded itunes, it wont let me transfer the music thats on to my phone. How do i get the music thats on my iphone on to my computer without it deleting everything? (please don
-
IPhone 4 turning off after unplugged from wall or PC/MAC
Hi Can someone help please? I sold my iphone 4 recently and it was returned to me. The guy had it for 6 hours and it suddenly crashed apparently (this is his words)! He then tried to restore and it failed with unknown error 21. Im no stranger to rese
-
Photos display from Notes with iPod Classic, but not Nano
I have created links to 5 small .jpg photos in a single Notes file in an iPod Classic, and each link and photo works and displays just fine. However, when I use the same file and photos on a Nano, (copied the exact same file structure and content fro
-
Audio configuration problem error message
I have just upgraded to version 7.1.1 and when I try to open it the following message appears i tunes cannot run because it has detected a problem with your audio configuration. I have tried returning to the old version, but that just comes up with t