Table storing GR Block stock value

dear experts,
I want to create a z report where i want to bring the value of GR block stock.
Currently it is following structure.
RMMMBESTN_DATEN
Struct.
WESPB
WESPB2
Is this value available in any other table from where i can bring this value.
Or any any method to report this.
Regards
SCSharma

Hi There
As per the STD SAP, GR blocked stock is a Non valuated stock, so at the time of receipt in to GR Blocked, only the material doc will be created and not the Accounting document,, Means that system itself it is not valuated and the PO qty will remain open         (open order Qty will not be redcuced)
So i think you can get the price from PO and Multiply with the qty for your report that would be only solution as you can not the value for this qty from the system,,,
Hope it helps,,,,
Thanks
Senthil

Similar Messages

  • Blocked stock value report daily

    Hi Gurus,
    I am looking for a report that shows value in USD for blocked stock per selected date for a material.
    Please let me know if any report. I tried MB52 it does give value in USD for blocked stock but it gives by batch number. I need that by date.
    Thanks for ya help in advance

    In MB52,in selection Don't tick  "Don't display values",In report,Click change layout,
    Check for blocked stock value field is available >? Move it to right side.
    or
    Develop a report using table MARD.

  • How to find Blocked Stock Value for a Material Division

    Hi Every Body,
    I have gone through the notes 589024,637927 to find out Blocked Stock value for a Particular Material at different plants . But I have to get Blocked Stock value at each Material Division . Kindly give some light on it to get it.
    The steps are same for finding the Consignment stock value and Transit Stock value. So kindly help me if any body has already worked on it.
    With rgds,
    Anil Kumar Sharma .P

    Hi Anil,
    well these notes work but they're prerequisites that have bothered me and unabled me to fulfill our requirement, for instance, having the material number in the drilldown and so on in order to perform the calculation during query execution.
    I believe there is not much more alternative if you still want to calculate valuations accurately at SLOC or any other stock indicator during query execution...
    I started from the basic fact that valuation of material underneath the plant/valuation area  (in my case 1 PLANT = 1 VALAREA).; precisely because all movements doens't carry all information as per the note explanation.
    So what we have done is to pull a cube with all Article/Sites MAP values; this can be done in several ways; MBEW/MBEWH are holding MAP values per fiscal periods; it has sufficient for us until now: our operations are asking to track MAP values more frequently.... So I am investigating how to work this out and have several alternatives:
    - MSEG has additional fields (available in the extract structures) like Total Stock Qty/Value PRIOR the posting. There is as well an indicator telling if the posting is relevant for the valuation (if it is going to affect the Qty/MAP or not). So it is possible to get the MAP after the posting for each material movement.
    - Create a change pointer on MBEW/MBEWH.
    - MKPF has two convenient fields (CPUDATE and CPUTIM) from which we could build our own delta extractor tracking MAP changes
    In BW the Idea  is to have a cube registering the Article/Plant valuation in time (non-cumulative) and then fulfill our queries via a multicube...
    hoping this will help you in solving your issue; I am of course following any topic in this matter so would appreciate your input....
    Olivier.

  • Table for GR Blocked Stock

    Hi
    I wanted to know the table for GR Blocked stock.
    Is there any table except MSEG / EKBE, from which I can get the GR Blocked stock entry details???
    Thanks
    Nilesh

    Hello ,
    1 They can be listed with all purchase order list displays like ME2M and ME2L and M2N
    You have to use selection parameter WE104
    2  GO  to  Se16n  and  give  EKBE

  • Which table is GR Blocked Stock saved in ?

    hi:
       when i do gr with movement type 107, can anyone tell me which table is GR Blocked Stock saved in ?
      thanks in advance..
    Monson

    if i do gr with 107, then you can see the GR Blocked Stock  with MMBE, I want to know which table is GR Blocked Stock  saved in , not material document. thanks ..if there is no directly table, can anyone tell me how to calculate it ?

  • Table name for opening stock value

    Hi,
    Can some body tell me the table name & the field name for opening stock value,
    (This is when you pass the date through LSMW at initial stage and it gets sits in which table)
    For ex. MB5B
    rgds
    Sonu

    There are many stock tables in SAP.
    if you load unrestricted use stock with value, then the quantity is going to MARD, quantity and value to MBEW.
    if material is batch managed, then stock per batch is going to MCHB, but still MARD and MBEW are updated.
    if you load non-valuated stock (material type UNBW), then only MARD is updated, no MBEW entry.
    and much more cases for consignment, sales order stock etc etc.
    If you try to find the values more than a month after the upload, and your materials had movements, then the old stock quantity at period closing is transfered to the history tables MARDH, MBEWH.
    If you load in the beginning of a month, then SAP calculates the opening stock by using the end of period stock and add/subs the material movements.Then you will not find the opening stock as a single number in any table.

  • Table used in Material cost value

    Hi,
    In Material cost estimation Cost Components views are Material Cost, Material Overhead, Subcontracting Charges, Conversion Cost and Total Cost. Material Cost is calculated based on Material price, Bom Qty, value put in KP26 i.e, fixed and variable pirce with combination of Cost Center and Activity type and processing hours, Labout hours from Routing. Total Cost appears with the combination of Material Cost and Conversion Cost . This Total Cost appears in costing view tab of Material Master and CKIS table. which table stored in Material Cost value. Kindly need your suggestion.
    Regards,
    Anindita

    Hi A Roy
    The tables are KEKO and KEPH....
    In KEKO you will find prod costimation no against the combination of Plant/Material
    Against this Prod Cst Est no, you will find the cost break up in KEPH table
    Regards
    Ajay M

  • Report to check the valued GR block stock

    Hi,
    I used movement type 107 to receive the PO with indicator 'Origin Accept', and would like to check how many stock I have received to the valued GR block stock.
    Anyone tell me which report I can use? I've checked the stock report under IM, but haven't found it.
    Thanks!
    Lin

    run Tcde MB52, and from change layout Ctrl+F8 move column Value BlockedStock.

  • Storage Location Wise Stock Value field and Table

    Hi ,
    Please let me know the storage location wise stock value field and table.
    Regards
    Suresh

    Hi Suresh,
    As per my understanding it is not possible in a single Table.
    If this is required for customized Z report then use this logic it may gives the correct information.
    In the combination of MARD and MBEW.. From MBEW you can get the value for each Base Unit of Measure then multiply that value with storage location stock.
    It may usefull to u..in the mean time i will try for some other option.
    Please revert if u have any query.
    Regards
    Durga Sana

  • Regarding: table having block stock field sales order wise

    Hi,
    I am working on report in which i have to display the block stock sales order wise ,i had used to tcode MB52 and MMBE and i was first using table MCHB and MARD ,it displays only the bocked stock ,but when i click on  special stocks icon in tcode MB52 n execute it the qty displayed in that is not being able to be displayed in the tables MARD n MCHB.
    right now i am using table MSKA and varifying it with MB52 tcode.
    PLZZ HELP ME OUT BY telling me which table to be used for displaying the block sales order wise.
    Edited by: ric .s on Mar 6, 2008 11:19 AM

    Hi,
    Try out this.
    DATA: is_object                TYPE sibflporb,
                it_relation_options TYPE obl_t_relt,
                is_relation_options TYPE obl_s_rolt,
               gt_links                    TYPE obl_t_link.
               is_object-instid    = <sales order number with leading zeros>.
               is_object-typeid   = 'BUS2032'.
               is_object-catid     = 'BO'.
    *u201Ddocument relation
    is_relation_options-sign      = 'I'.
    is_relation_options-option   = 'EQ'.
    is_relation_options-low        = 'ATTA'.
    APPEND is_relation_options TO it_relation_options.
    TRY.
        CALL METHOD cl_binary_relation=>read_links
          EXPORTING
            is_object           = is_object
            it_relation_options = it_relation_options
          IMPORTING
            et_links            = gt_links.
    ENDTRY.
    GT_LINKS should be filled if sales order has attachment.
    Regards,
    Sudhakar

  • Table name where all CCMS values stored

    Hi,
    Can any one provide the table name where all CCMS values stored ( for all MTE classes) in the data base?
    Regards
    Soumitra

    Hi,
    it is not a single table where CCMS stores the alert data.
    it is comming from multiple functional modules like..
    SALM_MT_GET_TREE_AND_MTDATA,
    SALM_MT_TYPE_GET,
    SALM_VIRTUAL_MT_CREATE,
    SALM_MT_TREES_CONCATENATE,
    SALM_ALERTS_PROP_IN_VIRT_TREE,
    SALM_MONITOR_CREATE,
    SALM_MONITOR_DESTROY,
    SALM_MONITOR_LOAD,
    SALM_MT_ALERT_DATA_SHOW,
    SALM_MT_MARKED_INFO_GET,
    SALM_ALERT_SET_DONE,
    SALM_ERRONOUS_MT_NODE_CREATE,
    SALM_GET_TID_BY_NAME,
    SALM_MT_DETAIL_DATA_SHOW,
    SALM_MONITOR_NAME_GET,
    SALM_MT_TREE_DISPLAYCONFIG_GET,
    SALM_MT_ANALYSE_SHOW,
    SALM_MT_ANALYSE,
    SALM_MT_TREE_LEGEND_SHOW,
    SALM_RAISE_ALERT_STATE_CHANGE,
    SALM_MT_INVALID_ACTION_WARNING,
    SALM_MT_DESTROY,
    SALM_MT_RESET,
    SALM_MT_MARKING_EDITOR,
    SALM_MT_MONITORING_START,
    SALM_MONISET_READ_FROM_DB,
    SALM_MONISET_WRITE_TO_DB,
    SALM_MONISET_ATTRIBUTE_EDITOR,
    SALM_MONISET_DELETE_FROM_DB,
    SALM_GET_MT_TREE_MARKINGS,
    SALM_MT_DESTROY,
    SALM_MT_RESET,
    SALM_MT_MARKING_EDITOR,
    SALM_MT_MONITORING_START,
    SALM_MONISET_READ_FROM_DB,
    SALM_MONISET_WRITE_TO_DB,
    SALM_MONISET_ATTRIBUTE_EDITOR,
    SALM_MONISET_DELETE_FROM_DB,
    SALM_GET_MT_TREE_MARKINGS,
    SALM_MT_CLASSES_MARK,
    SALM_MT_CLASS_NAME_GET,
    SALM_MONITOR_COPY,
    SALM_MONISET_COPY,
    SALM_MT_SAMPLES_GRAPH_DISPLAY,
    SALM_MT_READ,
    SALM_MT_GET_AID_BY_TID,
    SALM_MT_DESCRIPTION_SHOW,
    SALM_MONIDEF_NODE_EDITOR,
    SALM_MONIDEF_EDITOR,
    SALM_RULE_RESULT_NODE_CREATE,
    SALM_MONITOR_TEMPLATE_GENERATE,
    SALM_MONITOR_TEMPL_NODE_CREATE,
    SALM_MONITOR_PRESENTATION_GEN,
    SALM_MONIDEF_NODE_CREATE,
    SALM_MONIDEF_EDITOR,
    SALM_RULE_RESULT_NODE_CREATE,
    SALM_MONITOR_TEMPLATE_GENERATE,
    SALM_MONITOR_TEMPL_NODE_CREATE,
    SALM_MONITOR_PRESENTATION_GEN,
    SALM_MONIDEF_NODE_CREATE,
    SALM_GET_MONIDEF_TREE_MARKINGS,
    SALM_MSC_TIME_INTERVAL_GET,
    SALM_TEST_VALUE_REPORT,
    SALM_MONISET_DIRECTORY_GET,
    SALM_MONITOR_DIRECTORY_GET,
    SALM_MONITOR_TEMPLATE_GET,
    SALM_MONITOR_PRESENTATION_GET,
    SALM_MONISET_DISPLAYCONFIG_GET,
    SALM_MT_ALERT_DATA_GET,
    SALM_MONITOR_DISPLAYCONFIG_GET,
    SALM_ABORTED_TOOL_STATUS_RESET,
    SALM_MONISET_DIR_LEGEND_SHOW,
    SALM_MT_PERF_HISTORY_DATA_GET,
    SALM_ALERT_DESCRIPTION_SHOW,
    SALM_MONIDEF_RULE_DESCR_EDITOR,
    SALM_RULE_PARAM_TYPE_HELP,
    SALM_RULE_PARAM_DOCU_HELP,
    SALM_RULE_PARAM_DESCR_CHECK,
    SALM_LOGIN_TO_SYSTEM_OF_MTE,
    SALM_MT_R3SYSTEM_EXPLORE,
    SALM_MONITOR_LOAD_IN_OWN_TASK,
    SALM_MT_ALERT_DATA_SHOW_GRID,
    SALM_MT_ALERT_DATA_BUILD_ALV,
    SALM_ALERT_TIME_INTERVAL_GET,
    SALM_TEST_COPY_MONISETS,
    SALM_MONIDEF_WRITE_TO_FILE,
    SALM_MONIDEF_READ_FROM_FILE,
    SALM_MONIDEF_SYNTAX_CHECK,
    SALM_MT_STATE_CHANGE,,
    SALM_LOAD_MON_FROM_ACTIVE_SET,
    SALM_MONIDEF_SYNTAX_CHECK,
    SALM_MT_STATE_CHANGE,
    SALM_LOAD_MON_FROM_ACTIVE_SET,
    SALM_GET_CURRENT_DB_FORMAT_VER,
    SALM_MONIDEFS_OF_MONISET_GET,
    SALM_GET_CURRENT_MONISET,
    SALM_SET_CURRENT_MONISET,
    SALM_MT_ASSIGN_ATTRIBUTE_GROUP,
    SALM_VOLATILE_RULE_PARAM_SET,
    SALM_VOLATILE_SYSIDLIST_SET,
    SALM_MT_CLASSES_MARK,
    SALM_MT_CLASS_NAME_GET,
    SALM_MONITOR_COPY,
    SALM_MONISET_COPY,
    SALM_MT_SAMPLES_GRAPH_DISPLAY,
    SALM_MT_READ,
    Edited by: Soumitra Roy on Oct 13, 2009 5:31 AM

  • Block stock calculation from mseg table for any given date.

    I am calculating stock from mseg table for any given date. Not just month end stock or current stock. It could be back date also. It is tallying also with MB5B stock report of that date. Now I have to bifurcate that stock into unrestricted stock, quality stock and block stock.
    I have checked INSMK and ZUSTD field in mseg table, but could not concluded. Should I check movement type wise? Block/ Quality stock could be transferred into unrestricted stock also. That also I have to take care.
    Can anyone clearly explain how the stock type posting takes place in mseg table when goods receipt as block / quality stock and when the same goods transferred in unrestricted stock, what are the reference indication.

    DATA : LIST_TAB TYPE TABLE OF ABAPLIST.
    DATA: BEGIN OF VLIST OCCURS 0,
          FIELD1(5)  TYPE C,
          FIELD2(19) TYPE C,
          FIELD3(16) TYPE C,
          FIELD4(17) TYPE C,
          FIELD5(25) TYPE C,
          FIELD6(24) TYPE C,
          FIELD7(25) TYPE C,
          FIELD8(25) TYPE C,
          END OF VLIST.
    TYPES : BEGIN OF ITAB,
           MATNR(18) TYPE C,
           WERKS(5) TYPE C,
           END_MENGE(20) TYPE C,
           END OF ITAB.
    DATA : ITAB TYPE STANDARD TABLE OF ITAB WITH HEADER LINE,
            WA_TAB TYPE ITAB.
    ----submit command to run mb5b in the background and -
    ----push the data into an internal table -
    " Calling MB5B for displaying the Closing Stock
    SUBMIT RM07MLBD USING SELECTION-SCREEN  '1000'
                    WITH DATUM BETWEEN S_DATE-LOW AND S_DATE-HIGH
                    WITH MATNR IN S_MATNR WITH WERKS IN S_WERKS
                    WITH BWART-LOW = '601' EXPORTING LIST TO  MEMORY
                    AND RETURN.
    CALL FUNCTION 'LIST_FROM_MEMORY'
      TABLES
        LISTOBJECT = LIST_TAB
      EXCEPTIONS
        NOT_FOUND  = 1
        OTHERS     = 2.
    CALL FUNCTION 'LIST_TO_ASCI'
      EXPORTING
        LIST_INDEX         = -1
      TABLES
        LISTASCI           = VLIST
        LISTOBJECT         = LIST_TAB
      EXCEPTIONS
        EMPTY_LIST         = 1
        LIST_INDEX_INVALID = 2
        OTHERS             = 3.
    LOOP AT VLIST WHERE FIELD1 CS '|'.
    CHECK SY-TABIX GE 4.
    MOVE :  VLIST-FIELD1+1(4) TO ITAB-WERKS,
            VLIST-FIELD2+1(18) TO ITAB-MATNR,
            VLIST-FIELD8 TO ITAB-END_MENGE.
    APPEND ITAB.
    ENDLOOP.
    This is the program to call MB5B and the standard program and use the following settings for the closing stock opening stock and block stock

  • URGENT: REGARDING TABLE FOR SALES ORDER STOCK

    Hi,
    I making a report in which i have to display the material's minimum ,maximum and reorder point levels and its stock level too.
    but 1 problem i am facing is that if the stock is present in the sales order theni have to use the MSKA table but it contains different fields such as :-
    1.) Unrestricted stock
    2.) Block Stock
    3.) Quality stock
    I want to know that table which stoers the sum of all the values given above.
    plzz help me out how to solve this problem.it is really urgent to me as i have to complete the report right now.

    Hello,
    I think you have to sum up all the values (You can request the requirement from functionals) also you can always cross check with transaction MB52.

  • Goods receipts blocked stock and quality inspection

    Hi,
    we want to create an inspection lot for an initial sample automatically as the goods receipts is posted. At the same time we don't want the amount to appear in the normal quality inspection stock or in the normal blocked stock but instead it should be posted in the goods receipt blocked stock.
    Is it possible to post it automatically to the goods receipts blocked stock?
    Is it possible to create an inspection lot automatically for this?
    Thanks,
    Marcus.

    This isn't something that is straight forward, like just running a report.
    You have to look at the field QALS-LMENGEZUB which is the quantity to be posted of he inspection lot.  Keeping in mind that you can have multiple inspection lots for the same batch, you'd have to get all qals records for the batch you are interested in.
    You then have to compare all the related MCHB records for the material and ln that table sum all the values in field CINSM.
    That should show you any inconsistencies between the MM and QM.
    I am assuming this is for batch managed, non-HU managed materials.
    If not, let me know and we'll take another crack at it.
    FF

  • Custom Report for the Stock and Stock value for a specific date

    Hi SAP Gurus,
    Is there any SAP standard t-code or any logic to get the transcations (additions (for example: Purchases) and subtractions (Sales) to the inventory) for a particular materials in a plant and with Total Stock and also Total Stock value when that particular transaction happened?
    Our system is R/3 4.7
    I looked at the MB5B, MBCE, MBCA, MC44, MB51 and some other standard T-codes but could not find the total stock value at the time of Transaction happened.
    The history tables MBEWH and MARDH  are updated after the month end closing procedures, right, which means I will have the inventory value changing every month if material has Price "S".
    Thank you,
    -Harter

    Hi Harter,
    Unfortunately, you cannot see in a single tcode the value of stock and stock quantity on a specific date. As you yourself have pointed out, we only have to make use of the history table MBEWH, MARDH for the month wise stock quantity and value. Along with that you should also make use of the table MBEW to take teh stock quantity and value. So the total value of stock on a particular date will be
    Stock qnty = MBEWH value until the previous month (for teh specific valuation class, period etc) + MBEW value for the present date.
    But this will nto work out if you want to find out teh stock quantity and stock value on a past date basis. For past data, only  m onthwise data is available. For this anyway you can refer to MC.1 and so on reports.

Maybe you are looking for