Table for previous period stock

Please provide me the table name or report from which I can get only quality stock in previous monht
I just need the quality stock in previous month
need a table

xxxxH tables certainly have correct data, just not in good readable form.
you need to use a function module to retrieve the previous  period stock:
A calculation of previous period data for table MARD could have the following form.
  select * from mard into table mard_tab where werks = 'ABCD'.
  call function 'MARD_EXTEND'
    exporting
      xvper = 'X'
    tables
      mard_tab = mard_tab.
table MARD_TAB is filled with the previous period information.

Similar Messages

  • Stock Posting  for Previous Period

    Hi all,
    In case, there is a need to update stock for previous period (Stock Transactions: Initial Quantities Stock Tracking and Stock Posting /Stock Posting List ) e.g.  Update stock at 31/12/08 where there are stock movements within 2009, there is a System Message : Item quantities are not updated for initial entry of stock balances date, Update Now ?Yes , No, Cancel
    How we activate this message, in case that does not appear?
    Thanks in Advance

    Check this WIKI
    [How to update stock quantities according to a previous date?|https://wiki.sdn.sap.com/wiki/pages/viewpage.action?pageId=25494266]

  • Stock in Transit quantity by batch for previous period

    Hi all,
    Is there any way to get the information of stock quantity for stock in transit by batch for previous period?
    In standard SAP system, when the stock is issued with reference to STO with movement type 641, the stock will be stored in the system as stock in transit.  As the stock is sit at plant level, the standard SAP report does not show what batch was issued.
    I have a requirement to display stock value of previous period down to batch level.  Hence, SIT of what batch of previous period should also be displayed.
    Any idea of how this can done, or any workaround solution?
    Thanks.
    Tom

    MB5T lists the difference between delivery goods issued and goods receipt to your POs, as so called virtual stock in transfer
    MB52 lists the stock in transfer that had been done with inventory managment movements and was updated to MARC table.
    you have to find the movements (use MB51) that posted the stock that you can see in MB52.
    see info in OSS  Note 982345 - FAQ: stock overview MMBE

  • How to zero previous period stocks?

    Hi MM gurus,
    I want to activate batch management tick for existing materials which are not activated a batch management tick. To activate batch management tick it is needed to maintain zero stocks in current period and previous period.
    Current period is not a problem. But how to zero previous period stocks?
    Is there any way by posting a physical inventory adjustment to previous period? If so how to post a PI doc to previous period.
    Please reply me ASAP.
    thanks
    Sandun

    You can do it with movement type 201.
    Make sure that it is allowed to post to previous periods (MMRV transaction for MM- but as well in finnace needed)
    if previous period stock is 50
    and current stock is 100
    then you just need to do a  201 with a date from previous period for 50 and a 201 for 50 in the current period.
    but
    if previous period stock is 50
    and current stock is 20
    then you need to do a 202 movement in current period for 30 followed by  a 201 movement for 50 previous period

  • Previous period stock

    Hi,
    Can anyone tell me how can I get the previous period stock thru my program. Which table should i check to get the previous period stock?
    Thanks..
    Uma

    Please see table MBEWH
    Regards,
    RIch Heilman

  • Opening Balances for Previous Periods

    Hi Experts,
    There is a client requirement of entering opening balances for GL for previous periods before going live.
    eg it is required to have OB for 2006,2007 and 2008 before live transactions are entered into the system.
    Please enlighten on how to carry out this.
    Regards,
    Asap

    Hi Asap,
    You could only have one OB for one account.  If those OB for different years are for different accounts, it is ok.  Otherwise, you have 2006 OB only. You may create JE to get something like OB for 2007 and 2008.
    Thanks,
    Gordon

  • "lock" values of tax depreciation for previous periods

    Hi all,
    is it possible to lock calculated values of depreciation for previous periods? We need it for the case when e.g. depreciation key is changed. Then we want preserve the values for previous periods and change only the future values. But please note that we want this for depreciation area, which does not post values to GL.
    thanks
    Zbynek

    Hi,
    It did not work for me. I changed the useful life from 30 to 20 yrs and then used menu path Edit/Recalculate values. Then I used the Tx S_ALR_87012936 to display the depreciation values for individual months. But all the values were the same, i.e. the values for previous periods were not kept.
    So is there a way to keep these values?
    thanks,
    Zbynek

  • Vendor evaluation report to be run for previous period

    Hi,
    Is the possible to run the Vendor evaluation report for back date.
    i.e. if the period of evaluation is 30 days, can we run the report for previous periods
    Regds,
    Ritesh

    Depending on the library you are using, can you verify whether you can use one of the following variables?
    1PERIK   
    1PERW   
    5ACPERI  
    6-PERIK  
    8WPERIO
    All these variables use fiscal periods and not calendar periods, that way you don't have to bother about number of weeks in a period, unless you really need to do the calculation based on number of days in a period.
    If your library does not support these variables, then pl copy one of these variables (GS11) with appropriate details into a custom variable and use it in your report.
    Let me know.
    Regards
    Subodh

  • Tables for posting period check

    Hi,
    Can somebody tell me the tables for posting period check for tcodes F-63 and MIR7. I need to check whether the posting period is open when uploading data to these tcodes.
    Arun Mohan

    Use FM <b>FI_PERIOD_CHECK</b>
    Check this out for the same
    http://sap4.com/wiki/index.php?title=FI_PERIOD_CHECK
    Regards,
    Santosh

  • Manual postings to PCA for previous periods seems to get posted twice

    Dear All,
    Actual postings to PCA are performed manually using a custom job from SA38. Postings were made in FI for all previous (closed) periods . After running those jobs for previous periods to transfer those entries, some companies and accounts are showing duplicate amounts or just a balance on comparison ledger and not in base ledger. How to correct this.
    Thanks a lot for your help

    Hi
    You will have to use 9KE0 or a custom job again to rectify this
    Ajay M

  • Table for GR Blocked Stock

    Hi
    I wanted to know the table for GR Blocked stock.
    Is there any table except MSEG / EKBE, from which I can get the GR Blocked stock entry details???
    Thanks
    Nilesh

    Hello ,
    1 They can be listed with all purchase order list displays like ME2M and ME2L and M2N
    You have to use selection parameter WE104
    2  GO  to  Se16n  and  give  EKBE

  • Can we run KSU5 - Assessment Cycle execute for previous periods

    Dear Gurus,
    Can we run KSU5 for previous periods.  Means I have not ran from April 2008 onwards.  Can I run right for all periods.  Any inconsistencies arises for running the KSU5.
    Please guide us.
    Regards
    Srinivas

    Hi Srinivas,
    You can run the Cycle for previous periods also using KISR transaction code. Here, you can select the processing period (previous period) and posting period (current period) and the Cycle and the Segments.
    Note: If you want the postings to happen in the same corresponding processing periods, you need to check those periods to be open and consider other inconsistencies also.
    Pls revert back for further assistance...
    Srikanth Munnaluri

  • Costing for previous periods.

    Hi Experts,
    Is there any way to do the costing run for previous periods.
    I would like to do std. cost estimation for 5th period, but now we are in 6th period.
    System giving message as cost estimation can't be saved for past period.
    CK075: Planning date is in the past -> cost estimate cannot be saved
    SKS

    Dear Seshagiri,
    It's the standard SAP'e bahaviour and there is no meaning in costing for a past date.
    Also in my understanding
    1.If your Costing Run date is some future date ,but the Costing Date from,Qty Structure Date,Valuation
    date is on system's date,then the system will allow to release the cost and the same can be checked
    under Planned Price,Standard price under Current Column in Costing 2 view.
    2.If your costing run date is current date & the valuation,Qty structure date is some future date,then the
    system will not allow you to release the cost.
    check and revert back.
    Regards
    Mangalraj.S

  • Stock Values for previous period on batch number

    Need to show report which shows stock value and levels on a certain period (previous) by batch numbers.
    Report MMBE shows current stock levels per batch.
    Report MB5L shows stock value on a certain period (previous) but with no batch information
    Is there any standard reports which you can see all stock values and levels for the previous period on batch?
    Thanks

    Hi,
    Good morning and greetings,
    Please go through the following link
    http://help.sap.com/saphelp_erp2005vp/helpdata/en/25/2839124f7811d18a150000e816ae6e/frameset.htm
    Please reward points if found useful
    Thanking you
    With kindest regards
    Ramesh Padmanabhan

  • Transfer material stocks to PCA for previous periods (1KEH)

    I have an issue with 1KEH. We did not run the 1KEH(generate opening bal for material stocks) for period 2 . In SAP it looks like you can either run in for current period or previous period. (not 2 periods back).
    I looked this up with SAP note 858363. I looked up forum replies for the same issue before. The basic solution mentioned was to use transaction 1KEL. To quote "To be able to successfully execute Transaction 1KEH again, you have to use transaction 1KEL and set the origin object type to 19."
    Now from the same note there is a t code called 1KEC which can be used to do subsequent postings to PCA. I tried a test run. It seems to pick up what I want and do it correctly.
    Can someone advice me if using 1KEC is feasible. If i have to use 1KEL it has to be done one item at a time and we have too many records. Also I am not too sure on how to do 1KEL.
    Thanks..

    Hi
    You will have to use 9KE0 or a custom job again to rectify this
    Ajay M

Maybe you are looking for

  • Adobe pdfmaker 6.0 is missing in Outlook 2003

    Hi, I have users running XP Pro with Office Small Business 2003 with SBS 2003 server.  I have some users at this point that doesn't have pdfmaker toolbar in their Outlook 2003 but appear in Word 2003.  We have Adobe Standard 6.0.  As per the user, th

  • ADF-BC Adapter

    Hello friends, How can I perform CrUD operations by using ADF-BC Adapter. I tried it and created the Model Application of ADF-BC but don't know how to deploy it on web logic to get it's WSDL location which will later used in ADF-BC Web service? I am

  • IT0015: MORE THAN ONE KILOMETRE IN A MONTH

    When we create more than one kilometre claim in the same month, the rate is incorrect. Create a kilometer claim for 24/04. In the amount field is the total(300) for all kilometres, in the number field the total kilometers(100). Create a kilometer cla

  • How to use W64 files

    I'm a Sonar/Logic user. Sonar writes its files in the W64 (Sound Forge's WAVE 64) format if the file gets larger than .wav's 2GB limit. I need to import some of these files into Logic, and it doesn't seem to like them (i.e. they are grayed out when u

  • E72 - WIFI connection to house routers

    Hi, I have this Nokia E72 for a while, recently I am using it again.  Unable to connect my house's WIFI connection.  My house's internet connection is via Fibre.  Last time, I used the mobile to connect my old router's connection, have no problem.  I