Table for PO and Shopping cart combination in SRM
Hi Guys,
Can any one help me out with a table which gets updated with PO and Shopping numbers in SRM.?
Regards
Srujank
Hi Srujan.
The table CRMD_ORDERADM_H will store the document numbers. But it wont be storing both the shopping cart as well as PO number for a record.
To find out the SC number from PO or vice versa use the following method:
You can use pass the PO number in function module BBP_PD_PO_GETDETAIL.
From here you will get the Shopping cart Item Guid in E_ITEM-SRC_GUID. You can again pass this guid in the table CRMD_ORDERADM_I and get the parent guid.
Pass this parent guid in table CRMD_ORDERADM_H to get the shopping cart number. Its stored in the OBJECT_ID field.
There is another way to find out the shopping cart number:
Pass the PO number in FM BBP_PD_PO_GETDETAIL
Check the E_HEADER_REL, when the value of the field OBJTYPE_A = BUS2121 then the field GUID_A will contain the header guid of the shopping cart.
Use this guid to get the SC number from table CRMD_ORDERADM_H.
Hope this helps.
Thanks,
Pradeep
Similar Messages
-
Need help setting up approval workflow step for PO and Shopping Cart
Hello,
We are on SRM 7.0 and setup BRF and process level config for automatic approvals of SCs and POs using task 40007988. We would now like to test approval based workflow (create work item to route to approver) using a process level step.
1) Is there a standard task that can be used to enter in the process level step? Or should we create a new standard task? If a new task is required, what import/export parameters should be defined?
2) How do we setup agent for this step? Are the entries u201CResp Resolveru201D and u201CResp Resolver Parameteru201D in process level config required? The BADI BD_WF_RESP_RESOLVER already has some SAP delivered implementations? Should I create a new implementation here?
Thanks,
ZackHi,
Welcome to new Process-Controlled Workflow implementation in SRM 70.
You can find the task list in the transaction PFTC. Task Group 40000003.
Please activate the BC Sets in transaction SCPR20. Find the BC Sets /sapsrm/*.
Regards,
Masa -
Hi All,
I have to Get Each line item Create and Approval dates for a SHOPPING CART in SAP SRM. Either a table, or any Function module, Method, please let me know ASAP. Same i can use in my Program.
Thank you Very much.
Regards,
Ramesh J.Hi,
Refer the below wiki link it may help you.
Product catlog configuration for ECC - CRM - SCN Wiki -
Info record mandatory for shopping cart creation in SRM classic scneario
Hi Gurus,
We are creating shopping cart in our SRM 7.01 system in classic mode. We have not created any info record for the product category and vendor in the backend ECC system.
Do we need create an info record for the particular combination of material group/material and supplier in the ECC backend system so that the shopping cart in SRM classic scenario creates a PO directly in the system?
Thanks and regards,
RanjanHi Sam,
Thanks for your update. So, what you mean that the SRM shopping cart with a direct vendor or contract can create a PO directly in the backend system even if the backend system does not have nay info record for the particular combination of the material and vendor.
Thanks and regards,
Ranjan
Ranjan Sutradhar -
More than one Follow On documents for a single shopping cart
Hi All,
How can we determine if there will be more than one follow on document created for a single shopping cart.
One reason could be if shopping cart items have different source of supply.
What could be the other reasons. Also is there any way by which we can debug and find out the number of follow on documents created for a single shoppining cart.
Thanking you all in advance.
Thanks and Regards
ManojHi Manoj,
<i>"Also is there any way by which we can debug and find out the number of follow on documents created for a single shoppining cart."</i>
There's a FM to get all the follow on documents related to the SC and all the relations per item... use <b>BBP_PD_SC_GETDETAIL</b> and retrieve the <b>E_HEADER_REL</b> for the SC relations, and the <b>E_ITMLIM_REL</b> for each <b>item relations</b>.. there you will see:
OBJECT_ID_A -> OBJECT_ID_B
what it means is the relation between a SC and the PO, or the SC with a BID... you can identify the object types by taking a look in the 'BUS...'
OBJTYPE_A -> OBJECTTYPE_B
SC -> BUS2121
PO-> BUS2201
BID-> BUS2200
etc...
I hope this can help you to retrieve what you need....
BR,
Gerardo....
PS: reward points please.... -
Table for Customer and vendor open balance on a key date
Dear All,
Can anyone please let me know Table for Customer and vendor open balance on a key date. We are developing one customized report.
I have checked with the below table :
Customer-KNC1, KNC3,BSID, BSAD
Vendor-LFC1, LFC3, BSIK, BSAK.
But these are not working properly for all customers and vedors. Also, in open items, there are items with clearing documents.
Plesae let me know, how to go for it.
Please suggest.Hi
Use BSID and BSIK for open items
And pass company code, year and from date and to date range in Posting date selection option
Reg
Vishnu -
Need table for customer and vendor carry forward balance
Hi,
I need to fetch the carry forward(opening) balance for GL, customer and vendor account for my report.
I have table which contains c/f balance for GL accounts which is "GLT0" and now looking for a table for customer and vendor accounts.
Please let me know if anyone have idea in which table i can get the c/f balance for customer and vendor accounts.
Thanks in advance.
Regards,
SwatiHi Gurus
The requirement from the client side in my case is to have opening balance in Tr code ZFBL1n, ZFBL3N and ZFBL5N.
Now, from the above thread i got the Tables where i could find the Vendor and Customer Opening Balance but i also want Opening Balance for GL.
and my 2nd query is how to get these opening balance in Z report, at Header Level.
Thanks and Regards
Dnyanesh -
How to find R/3 table for FI and PS Datasources
Hi,
Can anyone tell me that how can we find SAP tables for FI and PS datasources in BI. Please provide information as it is urgent. Points will be assigned
Thanks
ShanthiHi,
To find DS assigned to a table.
How to find the Datasources for the given table names ?
How to find the Datasources for the given table names ?
To find Tables assigned to a DS.
USe Extractor Checker RSA3. Execute ST05 (activating SQL Trace), switch on the trace and execute the extractor checker. Once the extractor checker presents the results
switch off trace. The clcik on Display trace and you will see all the tables that were hit by the extractor checker to
retrieve data and present it to you.
Note: Set the break point in the Extractor Function module.
View the ST05 Extended Trace list. The Object name shows the Tables accessed.
Thanks,
JituK -
Source tables for forms and tabular forms must have a primary key.
Why does HTML DB 2.0 return the message
"Source tables for forms and tabular forms must have a primary key."
when trying to generate a "Report and Form" page based on a view defined like "create view <applicationschema>.a as select * from <sourceschema>.b" ?
It should be possible for HTML DB to "see" that the table "<sourceschema>.b" already has a primary key.
bw - ChristianChristian,
In the create application wizard, when creating form or tabular form pages, you can only use tables with primary keys, and not views, because that wizard is automatically deriving the primary key from the table definition. If you want to build forms on views or tables without a primary key, you need to use one of the create form wizards while working on an existing application. Those wizards allow you to pick your own column as a primary key column.
Regards,
Marc -
Taking long time filling the setup tables for sales and shipment
Hi ,
I am trying to fill the setup tables for sales and shipment and it is taking lot of time .
It took 16 hours just to bring 6 months of sales history data in the test environment .
Cn anybody help on this issue why it is taking that much of time ...
I am trying to load the sales data from R/3 into APO-BW from 2005 to 2007 .......
It is taking 16 hours to fill the data for only 6 months .Hi,
1. delete data and refill the setuptables again by spliting to several small pieces.
2. compare the data. wht is the last Document numner in RSA3(Maximum one). Start from Maximum one. may be bit complex approch.
you need to check with PSA and base tables.
keep one thing in your mind you need to check againest MSEG and BSEG only. noy BKPF and MKPF.
correct if i'm wrong.
either refill or create a user exit to avoid duplicae records(you should have very good understanding of data, it will lead to inconsitent data for delta records).
User exit not a good solution. it's one possibility.
****Assign Points If Helpful****
Regards,
Ravikanth -
Idoc for shopping cart details (SAP SRM)
Hello Members,
Is there any SAP Idoc type for sending shopping cart details (SAP SRM) to external system?
Thanks in advanceHi Experts,
I am also waiting for reply. I need to send shopping cart data from SRM system to PI system.
Thanks in advance for your help.
Regards,
Appanaboina -
Table for terms and conditions
what is table for terms and conditiions??
regards
jyotiHi Jyoti,
If u are looking for the payment terms then the table T052 and T052U.
Regards
Kiran Sure -
Base tables for aggragates and Multiproviders
Is RSDICMULTIIOBJ the base table for Multiproviders?
What is the base table for Aggragates and units?Multiproviders
RSDCUBEMULTI
RSDICMULTIIOBJ
Aggregates
RSDDAGGREF
RSDDAGGRT
RSDDCVERREPAGGR
RSDDAGGR
RSDDAGGRCOMP
RSDDAGGRDIR
RSDDAGGRDIR_M -
How to fill up set up tables for 2lis_03_UM and BF?
Hi,
I am working on Material movements, and i have a How to do document. According to that, its showing me to fill up set up table for 2Lis_03_bf by using TCode OLI1BW, and in the very next step its again telling me to fill up set up table for UM, by using the same TCODE ( OLI1BW ) .
Now, if i do that, how would the system know that it has to fill up set up table for BF and then UM ? , no where in the screen its asking to fill up the Data source.
OR i just have to fill up set up table ONCE, and it will fill up for both the DS ?
please help.
thanksHi,
I think you can follow the same procedure. After completion of setup table filling you can check the result in RSA3.
In case of UM, you will have the provision to load data based on specific Company codes, but if you don't have any such requirement then you can simply fill setup tables.
Regards,
Durgesh.
Edited by: Durgesh Gandewar on Aug 30, 2011 10:29 AM -
Table for shipping and billing documents ?
hi experts,
how can we come to know that what shipping (VL01n), and billing(VF01) documents has been created for any particular date.
actually the problem is that i want to modify some documents that i have created a few days ago, plz help me?
thanks in advance.Hi Vishal,
Some of the tables for Delivery and Billing are LIKP, LIPS, VBRK, VBRP, ...
If you want to modify document, modify at transaction level and it is not recommended to go and do the changes in the tables, as it is difficult to understand the impact of the same. if it is done at table level.
Assuming that you want to amend the quantity in Delivery and billing of the same, some of the recommended options are:
1. Cancel the Billing Document >> Reverse Post goods Issue >> make necessary changes in the quantity >> again do PGI >> Billing.
2. Create a return document to for necessary quantity >> Return delivery >> Post Goods receipt >> Credit Note (optional)
In the case of Price difference, follow the path of Debit Memo, Credit Memo or Invoice correction.
Identify Standard solution, so that it will update all the tables and records necessary.
Regards,
Rajesh Banka
Maybe you are looking for
-
Incorrect Photo Orientation - Aperture 3 to Apple TV 2
About a year ago I imported my iPhoto library of about 23,000 photos to Aperture 3. The iPhoto library had some small corruptions in it and I was hoping the more robust nature of Aperture 3 would fix these, but the import made the corruption issues
-
Help with creating a way to prioritize choices
Hi everyone. I am trying to create a survey in forms central and am having difficulty with one function. I would like for their to be a list and for respondents to be able to prioritize which items they would like in a future knowledge management sys
-
Dynamic variables in Web Intelligence
Hi Team, I am new BO reports. Have already worked on Crystal reports XI. With that knowledge, I have started working in BO web Intelligence reports. I am able to create a universe and able to create a sample WebI report using the universe. SQL viewer
-
Non deductible taxes in Quotation maintenance
Hi, I am comparing prices of two Vendors. One vendor is local and other is out of state. The out of state vendor will be applicable for CST, which is nondeductible tax and that amount going to hit in the Inventory posting. I have maintained the condi
-
Weird behavior under Mavericks - permissions?
I am administering one of the new Mac Pro cylinders for a design team to test. We are licensed up to Adobe Master Collection CS5.5 and almost all of the problems I have had with this new Mac and Mavericks seem to be permissions related. If anyone els